--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.9.0-8-amd64: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A
- From: Nazar Zhuk <nazar@zhuk.online>
- Date: Mon, 10 Sep 2018 06:51:42 +0200 (CEST)
- Message-id: <153655112844.5452.447447607055252967.reportbug@xps>
Package: src:linux
Version: 4.9.110-3+deb9u4
Severity: minor
Dear Maintainer,
I noticed messages like this in syslog:
[drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe
A (start=7921 end=7922) time 163 us, min 1788, max 1799, scanline start
1784, end 1802
They appear periodically and I don't see any pattern in timing or
relation to what I am doing.
No functionality seems to be affected and there are no visual artifacts
that I can see.
Searching for the error led me to suggestions to add i915.enable_psr=0
to kernel boot parameters. That didn't make a difference. Also, even
without it 'cat /sys/module/i915/parameters/enable_psr' shows 0.
I installed intel-microcode package and it didn't help.
-- Package-specific info:
** Version:
Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21)
** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/xps--vg-root ro video=1920x1080-32 apparmor=1 security=apparmor quiet splash
** Not tainted
** Kernel log:
[ 30.054199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 30.054335] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 30.054436] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 30.057835] int3403 thermal: probe of INT3403:03 failed with error -22
[ 30.058281] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 30.058477] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 30.064319] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 30.064887] EFI Variables Facility v0.08 2004-May-17
[ 30.089930] intel_rapl: Found RAPL domain package
[ 30.089932] intel_rapl: Found RAPL domain core
[ 30.089933] intel_rapl: Found RAPL domain uncore
[ 30.089934] intel_rapl: Found RAPL domain dram
[ 30.091000] pstore: using zlib compression
[ 30.091155] pstore: Registered efi as persistent store backend
[ 30.091160] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 30.093427] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 30.093669] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 30.093671] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 30.093672] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 30.093674] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 30.093748] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 30.093875] usbcore: registered new interface driver uvcvideo
[ 30.093876] USB Video Class driver (1.1.1)
[ 30.113817] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
[ 30.115286] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
[ 30.124396] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 30.128340] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 30.128343] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.128344] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 30.128345] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 30.128346] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 30.128347] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 30.128349] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 30.128350] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 30.150904] dell_wmi: Detected Dell WMI interface version 1
[ 30.150968] input: Dell WMI hotkeys as /devices/virtual/input/input16
[ 30.154320] Adding 16658428k swap on /dev/mapper/xps--vg-swap_1. Priority:-1 extents:1 across:16658428k SSFS
[ 30.162481] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 30.163375] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 30.163428] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 30.163475] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 30.163569] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 30.342578] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 30.356699] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.356700] Bluetooth: BNEP filters: protocol multicast
[ 30.356703] Bluetooth: BNEP socket layer initialized
[ 30.360295] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 30.383614] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 30.383617] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
[ 30.383626] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 30.383628] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
[ 30.383821] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/firmware-5.bin (-2)
[ 30.383823] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 30.383836] ath10k_pci 0000:3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[ 30.385533] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-4.bin
[ 30.385539] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 30.385541] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 30.385916] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 30.447966] ath10k_pci 0000:3a:00.0: board id is not exist in otp, ignore it
[ 30.448723] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 30.448892] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7
[ 30.475135] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL075B:01/0018:06CB:76AF.0002/input/input20
[ 30.475225] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 31.708851] Bluetooth: RFCOMM TTY layer initialized
[ 31.708856] Bluetooth: RFCOMM socket layer initialized
[ 31.708860] Bluetooth: RFCOMM ver 1.11
[ 32.568276] ath10k_pci 0000:3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 32.648680] ath: EEPROM regdomain: 0x69
[ 32.648681] ath: EEPROM indicates we should expect a direct regpair map
[ 32.648682] ath: Country alpha2 being used: 00
[ 32.648682] ath: Regpair used: 0x69
[ 32.655202] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 32.678933] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 34.959727] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 37.326472] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 37.387208] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 41.843738] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 41.896504] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX
[ 41.942833] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 41.943414] wlp58s0: authenticated
[ 41.943946] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 41.945070] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6)
[ 41.950026] wlp58s0: associated
[ 41.966923] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 49.216589] fuse init (API version 7.26)
[ 124.262182] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=7921 end=7922) time 163 us, min 1788, max 1799, scanline start 1784, end 1802
[ 529.668650] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=32238 end=32239) time 130 us, min 1788, max 1799, scanline start 1785, end 1800
[ 2297.705882] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=138288 end=138289) time 130 us, min 1788, max 1799, scanline start 1785, end 1800
** Model information
sys_vendor: Dell Inc.
product_name: XPS 13 9360
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 2.5.1
board_vendor: Dell Inc.
board_name: 0PF86Y
board_version: A00
** Loaded modules:
fuse
ctr
ccm
arc4
rfcomm
cmac
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
bnep
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
i2c_designware_platform
i2c_designware_core
binfmt_misc
snd_hda_codec_hdmi
dell_laptop
dell_led
nls_ascii
dell_wmi
dell_smbios
dcdbas
nls_cp437
vfat
fat
snd_soc_skl
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_sst_match
efi_pstore
snd_hda_codec_realtek
intel_rapl
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
coretemp
ath10k_pci
kvm_intel
kvm
snd_soc_core
irqbypass
ath10k_core
joydev
snd_compress
efivars
ath
pcspkr
serio_raw
mac80211
snd_hda_intel
iTCO_wdt
iTCO_vendor_support
cfg80211
rtsx_pci_ms
memstick
snd_hda_codec
snd_hda_core
snd_hwdep
uvcvideo
snd_pcm
videobuf2_vmalloc
snd_timer
videobuf2_memops
videobuf2_v4l2
videobuf2_core
snd
soundcore
videodev
btusb
btrtl
hid_multitouch
btbcm
media
btintel
bluetooth
idma64
rfkill
mei_me
mei
processor_thermal_device
intel_lpss_pci
shpchp
intel_lpss
intel_pch_thermal
intel_soc_dts_iosf
int3403_thermal
battery
soc_button_array
intel_vbtn
int340x_thermal_zone
evdev
ac
intel_hid
int3400_thermal
sparse_keymap
acpi_thermal_rel
tpm_crb
acpi_pad
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
algif_skcipher
af_alg
dm_crypt
dm_mod
usbhid
rtsx_pci_sdmmc
mmc_core
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
psmouse
i2c_i801
i2c_smbus
i915
i2c_algo_bit
xhci_pci
nvme
nvme_core
xhci_hcd
drm_kms_helper
rtsx_pci
mfd_core
usbcore
usb_common
drm
thermal
wmi
i2c_hid
hid
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:5904] (rev 03)
Subsystem: Dell Device [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:5926] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:075b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 281
Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 03)
Subsystem: Dell Skylake Processor Thermal Subsystem [1028:075b]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc420000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 280
Region 0: Memory at dc410000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:075b]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dc434000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc433000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc432000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 285
Region 0: Memory at dc431000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 274
Bus: primary=00, secondary=01, subordinate=39, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 275
Bus: primary=00, secondary=3a, subordinate=3a, sec-latency=0
Memory behind bridge: dc000000-dc1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 276
Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0
Memory behind bridge: dc300000-dc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 277
Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0
Memory behind bridge: dc200000-dc2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d4e] (rev 21)
Subsystem: Dell Device [1028:075b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:075b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dc42c000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d71] (rev 21) (prog-if 80)
Subsystem: Dell Device [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 286
Region 0: Memory at dc428000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dc400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:075b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc430000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network Adapter [1a56:1535]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 287
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:075b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 278
Region 1: Memory at dc300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
3c:00.0 Non-Volatile memory controller [0108]: Lite-On Technology Corporation Device [14a4:2200] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Marvell Technology Group Ltd. Device [1b4b:1093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at dc200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0c45:670c Microdia
Bus 001 Device 003: ID 04f3:20d0 Elan Microelectronics Corp.
Bus 001 Device 002: ID 0cf3:e301 Atheros Communications, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-8-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-8-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-8-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-8-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-8-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20161130-3
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---