[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#988207: linux-image-5.10.0-6-amd64: Multiple CDC devices does not work after migration Buster->Bullseye



Package: src:linux
Version: 5.10.28-1
Severity: important
X-Debbugs-Cc: jet@jet.kiev.ua

Dear Maintainer,

Recently I've upgraded from stable to upcoming stable.
The default kernel has been updated from 4.19 to 5.10 as well.
Immediatelly I discovered my builtin 3G modem stoped working.

Also several other devices stoped working as well:
 * Some Arduino boards
 * USB tethering from my smart phone (via USB cable)
 * Several embedded devkits
 * Some special UAV hardware(flight controllers like pixhawk, pixracer)

The similar point of all of them they are using cdc_acm driver for USB connection
handling. The device is getting registered with no problem.
However as soon as I'm trying to open (or NetworkManager tries)
corresponding serial device following message appear in the kernel logs:

    acm_port_activate - usb_submit_urb(ctrl irq) failed

...and corresponding serial port is not opening and is unaccessible.

Reconnecting USB cable(in case of external device) does not help.

Using kernel from current stable(4.19) solves problem completely and all
the devices works properly.

-- Package-specific info:
** Version:
Linux version 5.10.0-6-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.28-1 (2021-04-09)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-6-amd64 root=UUID=4eb79416-c320-4389-ba4c-1984b5764baf ro quiet

** Tainted: I (2048)
 * workaround for bug in platform firmware applied

** Kernel log:
[    7.740378] Bluetooth: HCI socket layer initialized
[    7.740380] Bluetooth: L2CAP socket layer initialized
[    7.740383] Bluetooth: SCO socket layer initialized
[    7.746932] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    7.755962] videodev: Linux video capture interface: v2.00
[    7.779037] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0418.0001/input/input25
[    7.779286] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0418.0001/input/input26
[    7.779442] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0418.0001/input/input27
[    7.779670] hid-multitouch 0003:04F3:0418.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0
[    7.836265] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    7.837634] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[    7.847008] ACPI: \: failed to evaluate _DSM (0x1001)
[    7.847012] ACPI: \: failed to evaluate _DSM (0x1001)
[    7.861397] cdc_acm 2-4:1.2: ttyACM0: USB ACM device
[    7.862363] usbcore: registered new interface driver cdc_acm
[    7.862365] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.889136] usbcore: registered new interface driver btusb
[    7.897724] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b449)
[    7.902773] cdc_ncm 2-4:1.0: MAC-Address: 00:00:11:12:13:14
[    7.902777] cdc_ncm 2-4:1.0: setting rx_max = 16384
[    7.903788] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-4, CDC NCM, 00:00:11:12:13:14
[    7.904086] Bluetooth: hci0: read Intel version: 370810011003110e00
[    7.905339] usbcore: registered new interface driver cdc_ncm
[    7.907606] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    7.907613] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    7.911415] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input29
[    7.911485] usbcore: registered new interface driver uvcvideo
[    7.911486] USB Video Class driver (1.1.1)
[    7.912798] usbcore: registered new interface driver cdc_wdm
[    7.919004] usbcore: registered new interface driver cdc_mbim
[    7.927848] cdc_ncm 2-4:1.0 enx000011121314: renamed from usb0
[    7.948780] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.948782] Bluetooth: BNEP filters: protocol multicast
[    7.948786] Bluetooth: BNEP socket layer initialized
[    8.150056] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[    8.168073] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated
[    8.223909] NET: Registered protocol family 38
[    9.954895] Bluetooth: RFCOMM TTY layer initialized
[    9.954901] Bluetooth: RFCOMM socket layer initialized
[    9.954907] Bluetooth: RFCOMM ver 1.11
[   17.571188] wlan0: authenticate with 48:f8:b3:5b:af:00
[   17.575783] wlan0: send auth to 48:f8:b3:5b:af:00 (try 1/3)
[   17.585695] wlan0: authenticated
[   17.588919] wlan0: associate with 48:f8:b3:5b:af:00 (try 1/3)
[   17.595834] wlan0: RX AssocResp from 48:f8:b3:5b:af:00 (capab=0x411 status=0 aid=4)
[   17.608716] wlan0: associated
[   18.955854] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.639536] wlan0: deauthenticated from 48:f8:b3:5b:af:00 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[   27.566331] wlan0: authenticate with 48:f8:b3:5b:af:00
[   27.570749] wlan0: send auth to 48:f8:b3:5b:af:00 (try 1/3)
[   27.577134] wlan0: authenticated
[   27.584721] wlan0: associate with 48:f8:b3:5b:af:00 (try 1/3)
[   27.588812] wlan0: RX AssocResp from 48:f8:b3:5b:af:00 (capab=0x411 status=0 aid=4)
[   27.593333] wlan0: associated
[  274.287090] mmc0: new high speed SDHC card at address 0001
[  274.295481] mmcblk0: mmc0:0001 SD16G 3.72 GiB 
[  274.311087]  mmcblk0: p1
[ 1077.062230] usb 2-3: new full-speed USB device number 6 using xhci_hcd
[ 1077.213607] usb 2-3: New USB device found, idVendor=17ef, idProduct=6033, bcdDevice= 4.02
[ 1077.213614] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1077.213618] usb 2-3: Product: Lenovo Wireless Laser Mouse N70
[ 1077.217747] input: Lenovo Wireless Laser Mouse N70 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:17EF:6033.0002/input/input30
[ 1077.218006] input: Lenovo Wireless Laser Mouse N70 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:17EF:6033.0002/input/input31
[ 1077.218271] hid-generic 0003:17EF:6033.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Lenovo Wireless Laser Mouse N70] on usb-0000:00:14.0-3/input0
[ 1266.407690] show_signal_msg: 2 callbacks suppressed
[ 1266.407692] LogReplayLink[5155]: segfault at 55f232727464 ip 000055f2309f8867 sp 00007f0128a8ac90 error 6 in QGroundControl[55f230800000+1c71000]
[ 1266.407702] Code: 89 44 24 30 e8 8a 1a e9 ff 4c 89 f7 e8 32 52 e8 ff 41 0f b6 47 41 4c 8d 25 a6 d3 d2 01 48 c7 44 24 28 00 00 00 00 48 8d 04 80 <41> c7 44 c4 04 01 00 00 00 48 8b 1c 24 4c 8d 6c 24 50 48 89 df e8
[ 1906.567843] mmc0: card 0001 removed
[ 1906.587583] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[ 2015.514557] usb 2-1: new full-speed USB device number 7 using xhci_hcd
[ 2015.663951] usb 2-1: New USB device found, idVendor=0483, idProduct=5740, bcdDevice= 2.00
[ 2015.663958] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2015.663962] usb 2-1: Product: fmuv3-BL
[ 2015.663965] usb 2-1: Manufacturer: ArduPilot
[ 2015.663968] usb 2-1: SerialNumber: 370028000E51393431353037
[ 2015.665678] cdc_acm 2-1:1.0: ttyACM1: USB ACM device
[ 2020.250766] usb 2-1: USB disconnect, device number 7
[ 2020.666539] usb 2-1: new full-speed USB device number 8 using xhci_hcd
[ 2020.815803] usb 2-1: New USB device found, idVendor=0483, idProduct=5740, bcdDevice= 2.00
[ 2020.815806] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2020.815808] usb 2-1: Product: fmuv3
[ 2020.815809] usb 2-1: Manufacturer: ArduPilot
[ 2020.815810] usb 2-1: SerialNumber: 370028000E51393431353037
[ 2020.817323] cdc_acm 2-1:1.0: ttyACM1: USB ACM device
[ 2058.234204] usb 2-1: USB disconnect, device number 8
[ 2058.542750] usb 2-1: new full-speed USB device number 9 using xhci_hcd
[ 2058.691745] usb 2-1: New USB device found, idVendor=0483, idProduct=5740, bcdDevice= 2.00
[ 2058.691747] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2058.691748] usb 2-1: Product: fmuv3
[ 2058.691749] usb 2-1: Manufacturer: ArduPilot
[ 2058.691750] usb 2-1: SerialNumber: 370028000E51393431353037
[ 2058.693476] cdc_acm 2-1:1.0: ttyACM1: USB ACM device
[ 2082.110941] cdc_acm 2-1:1.0: acm_port_activate - usb_submit_urb(ctrl irq) failed
[ 2097.104467] cdc_acm 2-1:1.0: acm_port_activate - usb_submit_urb(ctrl irq) failed
[ 2105.787542] cdc_acm 2-1:1.0: acm_port_activate - usb_submit_urb(ctrl irq) failed
[ 2382.401782] usb 2-1: USB disconnect, device number 9
[ 2382.753273] usb 2-1: new full-speed USB device number 10 using xhci_hcd
[ 2382.881387] usb 2-1: Device not responding to setup address.
[ 2383.093342] usb 2-1: Device not responding to setup address.
[ 2383.301268] usb 2-1: device not accepting address 10, error -71

** Model information
sys_vendor: LENOVO
product_name: 20BWS05G0L
product_version: ThinkPad T450s
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: JBET73WW (1.37 )
board_vendor: LENOVO
board_name: 20BWS05G0L
board_version: SDK0E50510 WIN

** Loaded modules:
mmc_block
ctr
ccm
rfcomm
cmac
algif_hash
algif_skcipher
af_alg
bnep
cdc_mbim
cdc_wdm
uvcvideo
videobuf2_vmalloc
videobuf2_memops
btusb
videobuf2_v4l2
videobuf2_common
btrtl
btbcm
btintel
cdc_ncm
videodev
cdc_ether
bluetooth
usbnet
mc
mii
cdc_acm
jitterentropy_rng
drbg
hid_multitouch
ansi_cprng
ecdh_generic
ecc
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
kvm_intel
binfmt_misc
kvm
irqbypass
nls_ascii
nls_cp437
vfat
fat
ghash_clmulni_intel
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
aesni_intel
iwlmvm
libaes
crypto_simd
joydev
snd_hda_intel
cryptd
snd_intel_dspcfg
mei_wdt
soundwire_intel
soundwire_generic_allocation
snd_soc_core
glue_helper
mac80211
snd_compress
soundwire_cadence
rapl
libarc4
snd_hda_codec
iwlwifi
intel_cstate
snd_hda_core
intel_uncore
snd_hwdep
mei_me
rmi_smbus
pcspkr
serio_raw
soundwire_bus
efi_pstore
rmi_core
at24
snd_pcm
mei
iTCO_wdt
intel_pch_thermal
wmi_bmof
intel_pmc_bxt
cfg80211
iTCO_vendor_support
thinkpad_acpi
snd_timer
nvram
ledtrig_audio
sg
watchdog
snd
soundcore
tpm_tis
rfkill
tpm_tis_core
tpm
ac
rng_core
evdev
coretemp
fuse
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
hid_generic
usbhid
hid
i915
rtsx_pci_sdmmc
mmc_core
xhci_pci
i2c_algo_bit
ahci
xhci_hcd
drm_kms_helper
libahci
crct10dif_pclmul
crct10dif_common
ehci_pci
libata
ehci_hcd
cec
usbcore
crc32_pclmul
e1000e
crc32c_intel
scsi_mod
psmouse
drm
i2c_i801
i2c_smbus
lpc_ich
rtsx_pci
battery
ptp
pps_core
usb_common
wmi
video
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09)
	Subsystem: Lenovo Broadwell-U Host Bridge -OPI [17aa:5034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	IOMMU group: 0
	Capabilities: <access denied>
	Kernel driver in use: bdw_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo HD Graphics 5500 [17aa:5036]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
	Region 4: I/O ports at 3000 [size=64]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 09)
	Subsystem: Lenovo Broadwell-U Audio Controller [17aa:5034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 58
	IOMMU group: 1
	Region 0: Memory at e1230000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI])
	Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller [17aa:5034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 47
	IOMMU group: 2
	Region 0: Memory at e1220000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP MEI Controller [17aa:5034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 50
	IOMMU group: 3
	Region 0: Memory at e1239000 (64-bit, non-prefetchable) [size=32]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (3) I218-LM [8086:15a2] (rev 03)
	Subsystem: Lenovo Ethernet Connection (3) I218-LM [17aa:2226]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 45
	IOMMU group: 4
	Region 0: Memory at e1200000 (32-bit, non-prefetchable) [disabled] [size=128K]
	Region 1: Memory at e123e000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Region 2: I/O ports at 3080 [disabled] [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller [17aa:5036]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 59
	IOMMU group: 5
	Region 0: Memory at e1234000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 [8086:9c9a] (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 42
	IOMMU group: 6
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: e1100000-e11fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 [8086:9c94] (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 43
	IOMMU group: 7
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: e1000000-e10fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller [17aa:5034]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 23
	IOMMU group: 8
	Region 0: Memory at e123d000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc3] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP LPC Controller [17aa:5034]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	IOMMU group: 9
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] [17aa:5034]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 46
	IOMMU group: 9
	Region 0: I/O ports at 30a8 [size=8]
	Region 1: I/O ports at 30b4 [size=4]
	Region 2: I/O ports at 30a0 [size=8]
	Region 3: I/O ports at 30b0 [size=4]
	Region 4: I/O ports at 3060 [size=32]
	Region 5: Memory at e123c000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP SMBus Controller [17aa:5034]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	IOMMU group: 9
	Region 0: Memory at e1238000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller [17aa:5034]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	IOMMU group: 9
	Region 0: Memory at e123b000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
	Subsystem: Lenovo RTS5227 PCI Express Card Reader [17aa:5034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	IOMMU group: 10
	Region 0: Memory at e1100000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci

03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095b] (rev 59)
	Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 54
	IOMMU group: 11
	Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi


** USB devices:
Bus 001 Device 002: ID 8087:8001 Intel Corp. Integrated Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 04f2:b449 Chicony Electronics Co., Ltd Integrated Camera
Bus 002 Device 004: ID 8087:0a2a Intel Corp. Bluetooth wireless interface
Bus 002 Device 003: ID 04f3:0418 Elan Microelectronics Corp. Touchscreen
Bus 002 Device 002: ID 1199:a001 Sierra Wireless, Inc. Sierra Wireless EM7345 4G LTE
Bus 002 Device 006: ID 17ef:6033 Lenovo Lenovo Wireless Laser Mouse N70
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-6-amd64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=uk_UA.UTF-8, LC_CTYPE=uk_UA.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C), LANGUAGE=uk:en_US
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-6-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-6-amd64 recommends:
ii  apparmor             2.13.6-10
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-6-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.04-17
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-6-amd64 is related to:
ii  firmware-amd-graphics     20210315-2
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20210315-2
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20210315-2
ii  firmware-misc-nonfree     20210315-2
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: