[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#819576: marked as done (linux-image-4.4.0-0.bpo.1-amd64: Brightness slowdown - Changing brightness takes some seconds and causes system slowdown)



Your message dated Thu, 06 May 2021 20:15:26 +0200
with message-id <E1leiWl-001Ont-GW@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #819576,
regarding linux-image-4.4.0-0.bpo.1-amd64: Brightness slowdown - Changing brightness takes some seconds and causes system slowdown
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
819576: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=819576
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.4.6-1~bpo8+1
Severity: important

Dear Maintainer,

After kernel upgrade, changing brightness takes some seconds and causes system
slowdown if i try to change more than one level at a time. This problem does
not happen in the other kernel packages i have installed(3.16, 4.3). I'm using
Gnome desktop, the problem happens when i try the change through the menu at
the top bar and especially if i try using fn keys to do it. If a hold fn+f5 or
f6 all the way to minimum or maximum, the action causes severe slowdown in the
system making it unusable for some time. I have theses modules installed in all
the kernel packages as can be seen below the result of "dkms status" command.

bbswitch, 0.8, 3.16.0-4-amd64, x86_64: installed
bbswitch, 0.8, 4.3.0-0.bpo.1-amd64, x86_64: installed
bbswitch, 0.8, 4.4.0-0.bpo.1-amd64, x86_64: installed
nvidia-current, 352.79, 3.16.0-4-amd64, x86_64: installed
nvidia-current, 352.79, 4.3.0-0.bpo.1-amd64, x86_64: installed
nvidia-current, 352.79, 4.4.0-0.bpo.1-amd64, x86_64: installed
virtualbox, 5.0.16, 3.16.0-4-amd64, x86_64: installed
virtualbox, 5.0.16, 4.3.0-0.bpo.1-amd64, x86_64: installed
virtualbox, 5.0.16, 4.4.0-0.bpo.1-amd64, x86_64: installed



-- Package-specific info:
** Version:
Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64 root=UUID=34333935-6a2e-401e-8284-fbd915a5c247 ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    3.046002] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    3.088769] clocksource: Switched to clocksource tsc
[    3.290615] Adding 11718652k swap on /dev/sda2.  Priority:-1 extents:1 across:11718652k FS
[    3.339649] uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
[    3.350828] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input18
[    3.350904] usbcore: registered new interface driver uvcvideo
[    3.350904] USB Video Class driver (1.1.1)
[    3.572536] pstore: Registered efi as persistent store backend
[    3.587952] Console: switching to colour frame buffer device 170x48
[    3.590360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.601464] intel_rapl: Found RAPL domain package
[    3.601467] intel_rapl: Found RAPL domain core
[    3.601468] intel_rapl: Found RAPL domain uncore
[    3.691816] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    3.710231] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[    3.723702] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[    3.737244] psmouse serio4: elantech: Elan sample query result 03, 23, 75
[    3.805084] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    3.969421] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.014334] systemd-journald[209]: Received request to flush runtime journal from PID 1
[    4.015494] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.023753] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    4.033615] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.133437] RPC: Registered named UNIX socket transport module.
[    4.133441] RPC: Registered udp transport module.
[    4.133442] RPC: Registered tcp transport module.
[    4.133443] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.136723] FS-Cache: Loaded
[    4.143627] FS-Cache: Netfs 'nfs' registered for caching
[    4.150812] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.227984] vboxdrv: Found 4 processor cores
[    4.230014] bbswitch: version 0.8
[    4.230022] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    4.230028] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    4.230040] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    4.230149] bbswitch: detected an Optimus _DSM function
[    4.230161] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    4.232850] bbswitch: disabling discrete graphics
[    4.232864] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    4.243924] vboxdrv: TSC mode is Invariant, tentative frequency 1696141449 Hz
[    4.243927] vboxdrv: Successfully loaded version 5.0.16_Debian (interface 0x00240000)
[    4.251583] VBoxNetFlt: Successfully started.
[    4.259276] VBoxNetAdp: Successfully started.
[    4.267229] VBoxPciLinuxInit
[    4.270773] vboxpci: IOMMU not found (not registered)
[    4.453681] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[    4.542816] r8169 0000:04:00.2 eth0: link down
[    5.621495] wlan0: authenticate with f8:d1:11:8f:cb:72
[    5.636127] wlan0: send auth to f8:d1:11:8f:cb:72 (try 1/3)
[    5.638508] wlan0: authenticated
[    5.639750] wlan0: associate with f8:d1:11:8f:cb:72 (try 1/3)
[    5.642909] wlan0: RX AssocResp from f8:d1:11:8f:cb:72 (capab=0x431 status=0 aid=4)
[    5.643017] wlan0: associated
[    5.645455] ath: EEPROM regdomain: 0x8348
[    5.645458] ath: EEPROM indicates we should expect a country code
[    5.645459] ath: doing EEPROM country->regdmn map search
[    5.645460] ath: country maps to regdmn code: 0x3a
[    5.645461] ath: Country alpha2 being used: US
[    5.645462] ath: Regpair used: 0x3a
[    5.645463] ath: regdomain 0x8348 dynamically updated by country IE
[    5.645485] cfg80211: Regulatory domain changed to country: US
[    5.645486] cfg80211:  DFS Master region: FCC
[    5.645488] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.645490] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[    5.645491] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[    5.645493] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[    5.645495] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[    5.645496] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   20.244336] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.244339] Bluetooth: BNEP filters: protocol multicast
[   20.244343] Bluetooth: BNEP socket layer initialized
[   21.902234] usb 3-1.1: USB disconnect, device number 3
[   22.064227] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:5ec9:d3ff:fe44:ea0c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=679065 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   22.074409] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:5ec9:d3ff:fe44:ea0c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=679065 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   48.330313] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x10 PREC=0x20 TTL=1 ID=0 PROTO=2 
[  173.356844] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2 
[  298.383089] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2 
[  419.213153] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105 LEN=372 TOS=0x00 PREC=0x00 TTL=64 ID=32395 PROTO=UDP SPT=1901 DPT=48544 LEN=352 
[  421.178184] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105 LEN=360 TOS=0x00 PREC=0x00 TTL=64 ID=32396 PROTO=UDP SPT=1901 DPT=48544 LEN=340 
[  423.306973] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x10 PREC=0x40 TTL=1 ID=0 PROTO=2 
[  425.183491] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=192.168.0.105 LEN=300 TOS=0x00 PREC=0x00 TTL=64 ID=32397 PROTO=UDP SPT=1901 DPT=48544 LEN=280 
[  425.256544] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=315 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=41776 DPT=48544 LEN=295 
[  425.256626] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=315 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=33132 DPT=48544 LEN=295 
[  425.256673] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:24:4b:03:6a:ab:ec:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=314 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=60744 DPT=48544 LEN=294 
[  427.302101] [UFW BLOCK] IN=wlan0 OUT= MAC=5c:c9:d3:44:ea:0c:00:25:11:b4:9c:68:08:00 SRC=192.168.0.107 DST=192.168.0.105 LEN=425 TOS=0x00 PREC=0x00 TTL=128 ID=20353 PROTO=UDP SPT=1900 DPT=48544 LEN=405 
[  548.333175] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x10 PREC=0xA0 TTL=1 ID=0 PROTO=2 
[  673.359365] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2 
[  798.283261] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2 
[  923.309432] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xE0 TTL=1 ID=0 PROTO=2 
[ 1048.335534] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2 
[ 1173.259279] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 
[ 1298.285434] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2 
[ 1336.377008] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 1423.311849] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2 
[ 1548.337620] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xE0 TTL=1 ID=0 PROTO=2 
[ 1673.261412] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2 
[ 1798.287540] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x18 PREC=0x20 TTL=1 ID=0 PROTO=2 
[ 1923.313596] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xA0 TTL=1 ID=0 PROTO=2 
[ 2048.237454] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x08 PREC=0xE0 TTL=1 ID=0 PROTO=2 
[ 2173.263460] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:f8:d1:11:8f:cb:72:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x1C PREC=0xE0 TTL=1 ID=0 PROTO=2 

** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: K46CB
product_version: 1.0       
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0       
bios_vendor: American Megatrends Inc.
bios_version: K46CB.207
board_vendor: ASUSTeK COMPUTER INC.
board_name: K46CB
board_version: 1.0       

** Loaded modules:
bnep
ctr
ccm
binfmt_misc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
bbswitch(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
ip6t_REJECT
nf_reject_ipv6
nf_log_ipv6
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
nf_reject_ipv4
nf_log_ipv4
nf_log_common
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
joydev
nls_utf8
nls_cp437
vfat
fat
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
uvcvideo
crc32_pclmul
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
v4l2_common
videodev
sha256_ssse3
sha256_generic
asus_nb_wmi
media
hmac
iTCO_wdt
asus_wmi
drbg
sparse_keymap
mxm_wmi
iTCO_vendor_support
ansi_cprng
efi_pstore
snd_hda_codec_hdmi
arc4
snd_hda_codec_realtek
snd_hda_codec_generic
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ath9k
ath9k_common
pcspkr
ath9k_hw
ath3k
evdev
ath
btusb
btrtl
btbcm
btintel
efivars
mac80211
psmouse
serio_raw
bluetooth
i915
snd_hda_intel
i2c_i801
snd_hda_codec
snd_hda_core
cfg80211
snd_hwdep
rtsx_pci_ms
snd_pcm
drm_kms_helper
snd_timer
rfkill
memstick
drm
snd
lpc_ich
mei_me
soundcore
i2c_algo_bit
mei
shpchp
int3403_thermal
wmi
int3402_thermal
int3400_thermal
battery
ac
int340x_thermal_zone
video
acpi_thermal_rel
tpm_tis
tpm
button
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sr_mod
cdrom
sd_mod
rtsx_pci_sdmmc
mmc_core
ahci
crc32c_intel
libahci
libata
scsi_mod
ehci_pci
xhci_pci
ehci_hcd
xhci_hcd
r8169
rtsx_pci
mii
mfd_core
usbcore
usb_common
thermal
fan
fjes

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: ivb_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f6000000-f70fffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at cfe08000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at f7a22000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7a20000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at f7a18000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f7900000-f79fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f7800000-f78fffff
	Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7a1f000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 30
	Region 0: I/O ports at f0b0 [size=8]
	Region 1: I/O ports at f0a0 [size=4]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at f7a1e000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:100d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 0
	Region 0: Memory at f7a1d000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]

01:00.0 3D controller [0302]: NVIDIA Corporation GK107M [GeForce GT 740M] [10de:0fdf] (rev ff) (prog-if ff)
	!!! Unknown header type 7f

03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
	Subsystem: Lite-On Communications Inc Device [11ad:6628]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=512K]
	Expansion ROM at f7980000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k

04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
	Subsystem: ASUSTeK Computer Inc. Device [1043:202f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 27
	Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci

04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
	Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: I/O ports at d000 [size=256]
	Region 2: Memory at f2104000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169


** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 13d3:5165 IMC Networks 
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.4.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.4.0-0.bpo.1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-4.4.0-0.bpo.1-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-4.4.0-0.bpo.1-amd64 suggests:
pn  debian-kernel-handbook         <none>
pn  grub-pc | grub-efi | extlinux  <none>
pn  linux-doc-4.4                  <none>

Versions of packages linux-image-4.4.0-0.bpo.1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        20160110-1~bpo8+1
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-4.4.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.4.0-0.bpo.1-amd64: true

--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: