--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.3.0-1-amd64: Qualcomm Atheros 10k QCA6174 does not initlialize
- From: username <username@hostname.com>
- Date: Sat, 26 Dec 2015 12:41:48 -0500
- Message-id: <145115170886.2074.2466126621148054399.reportbug@hostname>
Package: src:linux
Version: 4.3.3-2
Severity: important
Tags: upstream
I hope this is the right place to file this bug:
For both Debian stable (4.18 something) & unstable (4.3) The firmware for the
following Killer Ath10k card does not initialize, such that the wireless card
is completely non-functional.
lspci -nnv
01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless
Network Adapter [168c:003e] (rev 32)
Subsystem: Foxconn International, Inc. Device [105b:e09d]
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at a1000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
dmesg | grep ath10k
[ 8.845193] ath10k_pci 0000:01:00.0: pci irq msi-x interrupts 8 irq_mode 0
reset_mode 0
[ 9.081095] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/cal-
pci-0000:01:00.0.bin (-2)
[ 9.081096] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-
pci-0000:01:00.0.bin failed with error -2
[ 9.081101] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/QCA6174/hw3.0/board-pci-168c:003e:105b:e09d.bin (-2)
[ 9.081102] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA6174/hw3.0/board-pci-168c:003e:105b:e09d.bin failed with error -2
[ 9.081103] ath10k_pci 0000:01:00.0: failed to load spec board file, falling
back to generic: -2
[ 9.081106] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/QCA6174/hw3.0/board.bin (-2)
[ 9.081107] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA6174/hw3.0/board.bin failed with error -2
[ 9.081108] ath10k_pci 0000:01:00.0: failed to fetch generic board data: -2
[ 9.081108] ath10k_pci 0000:01:00.0: failed to fetch board file: -2
[ 9.081109] ath10k_pci 0000:01:00.0: could not fetch firmware files (-2)
[ 9.081109] ath10k_pci 0000:01:00.0: could not probe fw (-2)
-- Package-specific info:
** Version:
Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20151207 (Debian 5.3.1-3) ) #1 SMP Debian 4.3.3-2 (2015-12-17)
** Command line:
BOOT_IMAGE=/vmlinuz-4.3.0-1-amd64 root=/dev/mapper/hostname--vg-root ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 16.707365] Call Trace:
[ 16.707367] [<ffffffff812ddc89>] ? dump_stack+0x40/0x57
[ 16.707368] [<ffffffff81072b1d>] ? warn_slowpath_common+0x7d/0xb0
[ 16.707369] [<ffffffff81072bac>] ? warn_slowpath_fmt+0x5c/0x80
[ 16.707377] [<ffffffffa0648926>] ? skl_set_power_well+0x766/0x960 [i915]
[ 16.707384] [<ffffffffa0648d9c>] ? intel_display_power_get+0x9c/0xe0 [i915]
[ 16.707387] [<ffffffffa05e63c5>] ? snd_hdac_display_power+0x75/0x100 [snd_hda_core]
[ 16.707391] [<ffffffffa05fe9a3>] ? hda_codec_runtime_resume+0x13/0x50 [snd_hda_codec]
[ 16.707392] [<ffffffff81403aae>] ? __rpm_callback+0x2e/0x70
[ 16.707395] [<ffffffffa05fe990>] ? snd_hda_add_imux_item+0x120/0x120 [snd_hda_codec]
[ 16.707396] [<ffffffff81403b0f>] ? rpm_callback+0x1f/0x70
[ 16.707399] [<ffffffffa05fe990>] ? snd_hda_add_imux_item+0x120/0x120 [snd_hda_codec]
[ 16.707400] [<ffffffff81404208>] ? rpm_resume+0x458/0x660
[ 16.707403] [<ffffffffa04ceb45>] ? snd_pcm_hw_rule_add+0x175/0x1d0 [snd_pcm]
[ 16.707405] [<ffffffff81404c17>] ? __pm_runtime_resume+0x47/0x70
[ 16.707409] [<ffffffffa06066f5>] ? azx_pcm_open+0x1c5/0x330 [snd_hda_codec]
[ 16.707412] [<ffffffffa04cde59>] ? snd_pcm_open_substream+0x79/0x130 [snd_pcm]
[ 16.707414] [<ffffffffa04cdfce>] ? snd_pcm_open+0xbe/0x250 [snd_pcm]
[ 16.707416] [<ffffffff8109af70>] ? wake_up_q+0x60/0x60
[ 16.707419] [<ffffffffa04ce20d>] ? snd_pcm_playback_open+0x3d/0x70 [snd_pcm]
[ 16.707421] [<ffffffff811d171c>] ? chrdev_open+0xbc/0x190
[ 16.707422] [<ffffffff811d1660>] ? cdev_put+0x20/0x20
[ 16.707424] [<ffffffff811cb030>] ? do_dentry_open+0x1f0/0x2d0
[ 16.707426] [<ffffffff811daa8a>] ? path_openat+0x1da/0x1260
[ 16.707427] [<ffffffff8120e877>] ? inotify_handle_event+0xd7/0x150
[ 16.707429] [<ffffffff811dcca1>] ? do_filp_open+0x91/0x100
[ 16.707431] [<ffffffffa0474cba>] ? snd_card_file_remove+0x7a/0xe0 [snd]
[ 16.707433] [<ffffffff811cc4e9>] ? do_sys_open+0x139/0x220
[ 16.707434] [<ffffffff81581332>] ? system_call_fast_compare_end+0xc/0x67
[ 16.707435] ---[ end trace 5f92a38adfbcf939 ]---
[ 19.806622] [drm:intel_display_power_put [i915]] *ERROR* CSR firmware not ready (2)
[ 36.667702] usb 1-1: new high-speed USB device number 9 using xhci_hcd
[ 36.860499] usb 1-1: New USB device found, idVendor=0bda, idProduct=8189
[ 36.860512] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 36.860519] usb 1-1: Product: RTL8187B_WLAN_Adapter
[ 36.860525] usb 1-1: Manufacturer: Manufacturer_Realtek
[ 36.860531] usb 1-1: SerialNumber: 00e04c000001
[ 38.053075] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 38.053281] ieee80211 phy1: hwaddr 00:14:d1:49:07:71, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 38.066758] rtl8187: Customer ID is 0x00
[ 38.068067] rtl8187: wireless switch is on
[ 38.068098] usbcore: registered new interface driver rtl8187
[ 38.082302] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.268067] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.312419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 42.209659] wlan0: authenticate with ca:4f:d5:f4:31:f4
[ 42.434739] wlan0: send auth to ca:4f:d5:f4:31:f4 (try 1/3)
[ 42.444601] wlan0: authenticated
[ 42.446691] wlan0: associate with ca:4f:d5:f4:31:f4 (try 1/3)
[ 42.451143] wlan0: RX AssocResp from ca:4f:d5:f4:31:f4 (capab=0x431 status=0 aid=3)
[ 42.454085] wlan0: associated
[ 42.454114] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.464947] cfg80211: Regulatory domain changed to country: US
[ 42.464957] cfg80211: DFS Master region: FCC
[ 42.464962] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 42.464971] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 42.464979] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 42.464987] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 42.464993] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 42.464998] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 42.465004] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 144.752631] usb 1-4: new high-speed USB device number 10 using xhci_hcd
[ 144.939482] usb 1-4: New USB device found, idVendor=03f0, idProduct=3307
[ 144.939494] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 144.939503] usb 1-4: Product: v125w
[ 144.939510] usb 1-4: Manufacturer: HP
[ 144.939516] usb 1-4: SerialNumber: 6E961213345F
[ 144.965883] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 144.965953] scsi host2: usb-storage 1-4:1.0
[ 144.966040] usbcore: registered new interface driver usb-storage
[ 144.967420] usbcore: registered new interface driver uas
[ 145.986452] scsi 2:0:0:0: Direct-Access HP v125w PMAP PQ: 0 ANSI: 0 CCS
[ 145.988688] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 146.517618] sd 2:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 146.518390] sd 2:0:0:0: [sdb] Write Protect is off
[ 146.518403] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 146.518693] sd 2:0:0:0: [sdb] No Caching mode page found
[ 146.518707] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 146.553234] sdb: sdb1
[ 146.554568] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 161.376719] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 338.041821] usb 1-4: USB disconnect, device number 10
[ 1658.744955] usb 1-4: new high-speed USB device number 11 using xhci_hcd
[ 1658.932399] usb 1-4: New USB device found, idVendor=03f0, idProduct=3307
[ 1658.932411] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1658.932419] usb 1-4: Product: v125w
[ 1658.932425] usb 1-4: Manufacturer: HP
[ 1658.932430] usb 1-4: SerialNumber: 6E961213345F
[ 1658.933531] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 1658.933856] scsi host3: usb-storage 1-4:1.0
[ 1659.959226] scsi 3:0:0:0: Direct-Access HP v125w PMAP PQ: 0 ANSI: 0 CCS
[ 1659.960752] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1660.456453] sd 3:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 1660.456826] sd 3:0:0:0: [sdb] Write Protect is off
[ 1660.456852] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1660.457147] sd 3:0:0:0: [sdb] No Caching mode page found
[ 1660.457162] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1660.490249] sdb: sdb1
[ 1660.491817] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1683.228311] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
** Model information
sys_vendor: Acer
product_name: Aspire R5-471T
product_version: V1.03
chassis_vendor: Acer
chassis_version: Chassis Version
bios_vendor: Acer
bios_version: V1.03
board_vendor: Acer
board_name: Luffy
board_version: V1.03
** Loaded modules:
uas
usb_storage
ctr
ccm
arc4
rtl8187
eeprom_93cx6
rtsx_usb_ms
memstick
bnep
nls_utf8
nls_cp437
vfat
fat
snd_hda_codec_hdmi
snd_hda_codec_realtek
acer_wmi
snd_hda_codec_generic
sparse_keymap
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
ath10k_pci
intel_powerclamp
ath10k_core
coretemp
uvcvideo
efi_pstore
ath
videobuf2_vmalloc
videobuf2_memops
kvm_intel
videobuf2_core
kvm
mac80211
v4l2_common
videodev
joydev
media
cfg80211
hid_multitouch
i915
snd_hda_intel
evdev
snd_hda_codec
snd_hda_core
hci_uart
btusb
drm_kms_helper
btrtl
snd_hwdep
btbcm
drm
snd_pcm
btintel
mei_me
snd_timer
psmouse
snd
efivars
pcspkr
serio_raw
sg
soundcore
i2c_i801
i2c_algo_bit
shpchp
mei
bluetooth
rfkill
wmi
video
battery
ac
button
processor
acpi_pad
efivarfs
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
rtsx_usb_sdmmc
mmc_core
rtsx_usb
mfd_core
hid_generic
usbhid
dm_crypt
dm_mod
sd_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
jitterentropy_rng
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
xhci_pci
xhci_hcd
scsi_mod
usbcore
usb_common
thermal
i2c_hid
hid
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 126
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at a1200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Device [8086:9d31] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 255
Region 0: Memory at a122a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:15.0 Signal processing controller [1180]: Intel Corporation Device [8086:9d60] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at a122b000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:15.1 Signal processing controller [1180]: Intel Corporation Device [8086:9d61] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at a122c000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:9d3a] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at a122d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at a1228000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at a1230000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3088 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at a122e000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: a1000000-a11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d48] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:9d21] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at a1224000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d70] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 135
Region 0: Memory at a1220000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at a1210000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:9d23] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:105a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at a122f000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Foxconn International, Inc. Device [105b:e09d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at a1000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 007: ID 04f2:b51f Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 04f3:222a Elan Microelectronics Corp.
Bus 001 Device 003: ID 0489:e09f Foxconn / Hon Hai
Bus 001 Device 011: ID 03f0:3307 Hewlett-Packard
Bus 001 Device 006: ID 0b38:0010 Gear Head 107-Key Keyboard
Bus 001 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 009: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.3.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.58
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 22-1
ii linux-base 4.0
Versions of packages linux-image-4.3.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
Versions of packages linux-image-4.3.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi | extlinux <none>
pn linux-doc-4.3 <none>
Versions of packages linux-image-4.3.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true
linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64:
--- End Message ---