[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#952821: marked as done (Regression: T420 not accepting inputs - usb device not accepting address, pci=noacpi)

Your message dated Sun, 02 May 2021 05:52:31 -0700 (PDT)
with message-id <608ea08f.1c69fb81.fd337.1a57@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #952821,
regarding Regression: T420 not accepting inputs - usb device not accepting address, pci=noacpi
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
952821: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=952821
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.19.87-1
Severity: important
Tags: upstream

Dear maintainer,

I found a regression bug.
With kernel starting from version linux-image-4.19.0-7-amd64 (4.19.87-1) my
Thinkpad T420 "freezes" on boot (no inputs taken, can't enter the decryption
password, so can't boot my device). The kernel version linux-
image-4.19.0-6-amd64 (4.19.67-2+deb10u2) just works fine.

Even so I can enter anything it continues to show (with changing n):
usb 1-1: device not accepting address n, error -110
usb 2-1: new high-speed USB device number n using ehci-pci
usb usb2-port1: attempt power cycle

It shows this errors even so no [external] USB devices are connected.

With Kernel <4.19.76 I can boot normally with kernel settings:
pci=noacpi.
Without this setting the screen stays black, so I have to use it.

I made a git bisect (stable branch) and found:
b40c15c20e42491303202ae1368841704be0c3b9 is the first bad commit
commit b40c15c20e42491303202ae1368841704be0c3b9
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Mon Jul 22 20:47:08 2019 +0200

    x86/apic: Soft disable APIC before initializing it

    [ Upstream commit 2640da4cccf5cc613bf26f0998b9e340f4b5f69c ]

    If the APIC was already enabled on entry of setup_local_APIC() then
    disabling it soft via the SPIV register makes a lot of sense.

    That masks all LVT entries and brings it into a well defined state.

    Otherwise previously enabled LVTs which are not touched in the setup
    function stay unmasked and might surprise the just booting kernel.

    Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
    Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
    Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.de
    Signed-off-by: Sasha Levin <sashal@kernel.org>

:040000 040000 db502796eb6fdf24be8a4b6442531cd027b4d459
8a9beff72957993cab7366eaa36c2d25700e1676 M      arch

This is why I sorted this bug into ACPI bugs.

I can't use any newer kernel version if this bug remains as either my system
"freezes" (don't accepts inputs) with pci=noacpi set or doesn't display
anything.

In older kernel / debian versions (3.xx, Jessie) everything worked fine out of
the box.
How can I contribute to get to this state again?



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: LENOVO
product_name: 4236BD5
product_version: ThinkPad T420
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 83ET82WW (1.52 )
board_vendor: LENOVO
board_name: 4236BD5
board_version: Not Available

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Lenovo 2nd Generation Core Processor Family DRAM Controller [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo 2nd Generation Core Processor Family Integrated Graphics Controller [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at 430000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at 420000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 0000
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family MEI Controller [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at 430a04100 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo 82579LM Gigabit Network Connection (Lewisville) (ThinkPad T520) [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fec20000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at fec01000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 0000
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fec02800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family High Definition Audio Controller [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at 430a00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: fef00000-ff0fffff
	Prefetchable memory behind bridge: 0000000430400000-00000004305fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: ff100000-ff1fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 20
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	Memory behind bridge: ff200000-ff3fffff
	Prefetchable memory behind bridge: 0000000430600000-00000004307fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	Memory behind bridge: ff400000-ff6fffff
	Prefetchable memory behind bridge: 0000000430800000-00000004309fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fec02c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Lenovo QM67 Express Chipset LPC Controller [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 23
	Region 0: I/O ports at 0000
	Region 1: I/O ports at 0000
	Region 2: I/O ports at 0000
	Region 3: I/O ports at 0000
	Region 4: I/O ports at 0000
	Region 5: Memory at fec02000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Lenovo 6 Series/C200 Series Chipset Family SMBus Controller [17aa:21ce]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at 430a04000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0000
	Kernel modules: i2c_i801

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at ff100000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller [1180:e823] (rev 08) (prog-if 01)
	Subsystem: Lenovo PCIe SDXC/MMC Host Controller [17aa:21ce]
	Physical Slot: 4
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ff400000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci


** USB devices:
Bus 002 Device 003: ID 1050:0405 Yubico.com Yubikey 4 OTP+CCID
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID eb1a:299f eMPIA Technology, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.3
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-6-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-7-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod                                    26-1
ii  linux-base                              4.6

Versions of packages linux-image-4.19.0-7-amd64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4

Versions of packages linux-image-4.19.0-7-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02+dfsg1-20
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-7-amd64 is related to:
ii  firmware-amd-graphics     20190717-2~bpo10+1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20190114-2
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20190717-2~bpo10+1
ii  firmware-misc-nonfree     20190717-2~bpo10+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: