--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: ata2: COMRESET failed (errno=-16) slows down booting up and waking up from suspend
- From: cibegtd <ano0nymo0us1@gmail.com>
- Date: Tue, 29 Apr 2014 12:26:44 +0200
- Message-id: <20140429102644.22166.33867.reportbug@ultrabook>
Package: src:linux
Version: 3.13.10-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
I think the dead soldered ssd causes this situation.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I have put libata.force=2.0:disable in the grub.
I also tried to disable the module that read the ssd card by creating
/etc/modprobe.d/libata.conf file and putting "options libata
force=2:disable" in it.
* What was the outcome of this action?
The issue is not solved.
* What outcome did you expect instead?
I expected that the mentioned error did not appear any more.
-- Package-specific info:
** Version:
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15)
** Command line:
BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=/dev/mapper/g0-root ro quiet acpi_backlight=vendor libata.force=2.0:disable
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 164.368047] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 164.368582] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 164.369648] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 164.369999] usbcore: registered new interface driver rts5139
[ 164.384121] acer_wmi: Disabling ACPI video driver
[ 164.386088] input: Acer WMI hotkeys as /devices/virtual/input/input9
[ 164.387307] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
[ 164.402797] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 164.402814] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 164.402816] [drm] Driver supports precise vblank timestamp query.
[ 164.402889] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 164.419612] cfg80211: World regulatory domain updated:
[ 164.419617] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 164.419620] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 164.419622] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 164.419624] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 164.419627] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 164.419629] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 164.419630] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 164.430614] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 164.430617] [drm] This can cause pipe underruns and display issues.
[ 164.430618] [drm] Please upgrade your BIOS to fix this.
[ 164.447940] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 164.448207] fbcon: inteldrmfb (fb0) is primary device
[ 164.448789] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11
[ 164.448862] usbcore: registered new interface driver uvcvideo
[ 164.448862] USB Video Class driver (1.1.1)
[ 165.170325] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
[ 165.182813] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x13, 0x0e.
[ 165.244798] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 165.364172] Console: switching to colour frame buffer device 170x48
[ 165.368735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 165.368738] i915 0000:00:02.0: registered panic notifier
[ 165.391901] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 165.392033] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 165.392191] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 165.392278] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 165.392290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 165.392296] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 165.392302] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 165.392305] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 165.392311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 165.392313] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 165.392318] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 165.392321] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 165.392514] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 165.392526] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 165.397609] iTCO_vendor_support: vendor-support=0
[ 165.398072] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 165.398108] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 165.398246] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 165.569256] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 165.598001] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 165.907289] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 193.067793] lp: driver loaded but no devices found
[ 193.072842] ppdev: user-space parallel port driver
[ 193.083317] loop: module loaded
[ 193.090982] fuse init (API version 7.22)
[ 193.318392] Adding 8249340k swap on /dev/mapper/g0-swap. Priority:-1 extents:1 across:8249340k SS
[ 193.395292] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 193.396134] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 193.399989] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 193.403583] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 193.595082] RPC: Registered named UNIX socket transport module.
[ 193.595086] RPC: Registered udp transport module.
[ 193.595087] RPC: Registered tcp transport module.
[ 193.595088] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 193.597567] FS-Cache: Loaded
[ 193.602790] FS-Cache: Netfs 'nfs' registered for caching
[ 193.608543] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 193.976435] Bluetooth: Core ver 2.17
[ 193.976456] NET: Registered protocol family 31
[ 193.976458] Bluetooth: HCI device and connection manager initialized
[ 193.976468] Bluetooth: HCI socket layer initialized
[ 193.976471] Bluetooth: L2CAP socket layer initialized
[ 193.976476] Bluetooth: SCO socket layer initialized
[ 193.982176] Bluetooth: RFCOMM TTY layer initialized
[ 193.982189] Bluetooth: RFCOMM socket layer initialized
[ 193.982195] Bluetooth: RFCOMM ver 1.11
[ 193.983272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 193.983276] Bluetooth: BNEP filters: protocol multicast
[ 193.983284] Bluetooth: BNEP socket layer initialized
[ 194.097913] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 194.508418] systemd-logind[3043]: New seat seat0.
[ 194.509026] systemd-logind[3043]: Watching system buttons on /dev/input/event3 (Power Button)
[ 194.509096] systemd-logind[3043]: Watching system buttons on /dev/input/event11 (Video Bus)
[ 194.509158] systemd-logind[3043]: Watching system buttons on /dev/input/event2 (Lid Switch)
[ 194.509219] systemd-logind[3043]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 194.509910] systemd-logind[3043]: New session c1 of user lightdm.
[ 194.509999] systemd-logind[3043]: Linked /tmp/.X11-unix/X0 to /run/user/110/X11-display.
[ 194.810913] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 195.886457] wlan0: authenticate with 00:1e:e5:84:fa:cf
[ 195.910356] wlan0: send auth to 00:1e:e5:84:fa:cf (try 1/3)
[ 195.912544] wlan0: authenticated
[ 195.912898] wlan0: associate with 00:1e:e5:84:fa:cf (try 1/3)
[ 195.917003] wlan0: RX AssocResp from 00:1e:e5:84:fa:cf (capab=0x411 status=0 aid=2)
[ 195.917063] wlan0: associated
[ 195.917075] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 203.107482] systemd-logind[3043]: New session 1 of user mehdi.
[ 203.107588] systemd-logind[3043]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
** Model information
sys_vendor: Acer
product_name: Aspire S3
product_version: 1.18
chassis_vendor: Acer
chassis_version: Chassis Version
bios_vendor: INSYDE
bios_version: 1.18
board_vendor: Acer
board_name: Aspire S3
board_version: 1.18
** Loaded modules:
ctr
ccm
bnep
rfcomm
bluetooth
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
loop
parport_pc
ppdev
lp
parport
iTCO_wdt
iTCO_vendor_support
joydev
x86_pkg_temp_thermal
intel_powerclamp
rts5139(C)
uvcvideo
videobuf2_vmalloc
videobuf2_memops
arc4
videobuf2_core
videodev
media
acer_wmi
sparse_keymap
ath9k
intel_rapl
ath9k_common
ath9k_hw
coretemp
ath
snd_hda_codec_hdmi
kvm_intel
mac80211
kvm
cfg80211
rfkill
psmouse
serio_raw
evdev
pcspkr
snd_hda_codec_realtek
i2c_i801
lpc_ich
mfd_core
ac
i915
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
battery
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
drm_kms_helper
drm
i2c_algo_bit
i2c_core
snd
wmi
processor
mei_me
button
video
mei
soundcore
ext4
crc16
mbcache
jbd2
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
ehci_pci
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at c0504000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0509000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c0400000-c04fffff
Prefetchable memory behind bridge: 00000000afb00000-00000000afbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c0508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation UM67 Express Chipset Family LPC Controller [8086:1c47] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 2094 [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 2090 [size=4]
Region 4: I/O ports at 2060 [size=32]
Region 5: Memory at c0507000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0635]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2040 [size=32]
02:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6618]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0400000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at afb00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 1bcf:2c00 Sunplus Innovation Technology Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'testing-updates'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.13-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-1-amd64/postinst/depmod-error-initrd-3.13-1-amd64: false
linux-image-3.13-1-amd64/prerm/removing-running-kernel-3.13-1-amd64: true
--- End Message ---