--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-2-686-pae: boot crash with VT6415 controller (pata_via)
- From: Giuliano Procida <giuliano.procida@gmail.com>
- Date: Mon, 25 Jun 2012 23:07:44 +0100
- Message-id: <CAE-HYsOz4w=fkBDgmHnMGaUT7Y7jB=9BoOndaYsP4WtfOfT_ow@mail.gmail.com>
Package: src
Version: 3.2.20-1
Severity: normal
Tags: upstream
Dear Maintainer,
The motherboard in this computer includes the (apparently rare) VIA VT6415 PATA
controller. There are a few reports out there of boot failures with this chip
(and optical drives) since pata_via replaced the legacy IDE driver.
The last working kernel I have is a custom built 2.6.33 (with no pata_via).
With anything more recent, I get a fairly reliable boot crash without taking
special actions (disabling the controller in the BIOS, blacklisting the via_pata
module or setting the libata module option dma=1).
There are no useful messages in the boot log as far as I can tell (as it just
stops at a varying point within the partition enumeration of my SATA drives).
The included kernel log has pata_via being inserted and removed manually at the
end. I currently have it blacklisted as believe it (or the VIA chip itself) is
also responsible for random lockups that happen well after boot, even
with dma=1.
I have tried setting up a crashkernel with NMI watchdog but the crash/hang does
not appear to trigger a reboot. I've also ensured that BIOS is on the latest
version and tried both with and without the VIA IDE option ROM enabled.
I would be very happy to help in any way to get this problem fixed, including
installing patched kernels etc. I just don't know the best way to tackle this.
The code in pata_via.c appears to be mostly hardware initialisation.
Regards,
Giuliano Procida
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.20-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) )
#1 SMP Mon Jun 11 18:27:04 UTC 2012
** Command line:
root=/dev/md2 ro rootdelay=3 crashkernel=128M nmi_watchdog=1
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.20-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) )
#1 SMP Mon Jun 11 18:27:04 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-M
EVO, BIOS 1704 05/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0096000] 96000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 37420000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36850000 - 3741f94b
[ 0.000000] Move RAMDISK from 0000000037420000 - 0000000037fef94a
to 36850000 - 3741f94a
[ 0.000000] Reserving 128MB of memory at 384MB for crashkernel
(System RAM: 4864MB)
[ 0.000000] ACPI: RSDP 000fb570 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT cff80100 0005C (v01 052711 XSDT1346 20110527
MSFT 00000097)
[ 0.000000] ACPI: FACP cff80290 000F4 (v03 052711 FACP1346 20110527
MSFT 00000097)
[ 0.000000] ACPI: DSDT cff80450 0E7B5 (v01 A1581 A1581001 00000001
INTL 20060113)
[ 0.000000] ACPI: FACS cff98000 00040
[ 0.000000] ACPI: APIC cff80390 0007C (v01 052711 APIC1346 20110527
MSFT 00000097)
[ 0.000000] ACPI: MCFG cff80410 0003C (v01 052711 OEMMCFG 20110527
MSFT 00000097)
[ 0.000000] ACPI: OEMB cff98040 00072 (v01 052711 OEMB1346 20110527
MSFT 00000097)
[ 0.000000] ACPI: SRAT cff8f8a0 000E8 (v01 AMD FAM_F_10 00000002
AMD 00000001)
[ 0.000000] ACPI: HPET cff8f990 00038 (v01 052711 OEMHPET 20110527
MSFT 00000097)
[ 0.000000] ACPI: SSDT cff8f9d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3974MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048330
[ 0.000000] free_area_init_node: node 0, pgdat c1411d80,
node_mem_map f4250200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3946 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7949 pages used for memmap
[ 0.000000] HighMem zone: 812661 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32
nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7997000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1038601
[ 0.000000] Kernel command line: root=/dev/md2 ro rootdelay=3
crashkernel=128M nmi_watchdog=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00130000)
[ 0.000000] Memory: 4004800k/4980736k available (2845k kernel code,
188520k reserved, 1352k data, 416k init, 3282440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c75ec - 0xc1419640 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c75ec (2845 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:728 16
[ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3415.158 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6830.31 BogoMIPS (lpj=13660632)
[ 0.004070] pid_max: default: 32768 minimum: 301
[ 0.004126] Security Framework initialized
[ 0.004162] AppArmor: AppArmor disabled by boot time parameter
[ 0.004205] Mount-cache hash table entries: 512
[ 0.004315] Initializing cgroup subsys cpuacct
[ 0.004350] Initializing cgroup subsys memory
[ 0.004388] Initializing cgroup subsys devices
[ 0.004421] Initializing cgroup subsys freezer
[ 0.004455] Initializing cgroup subsys net_cls
[ 0.004489] Initializing cgroup subsys blkio
[ 0.004525] Initializing cgroup subsys perf_event
[ 0.004573] CPU: Physical Processor ID: 0
[ 0.004606] CPU: Processor Core ID: 0
[ 0.004640] mce: CPU supports 6 MCE banks
[ 0.004678] using AMD E400 aware idle routine
[ 0.004919] ACPI: Core revision 20110623
[ 0.012037] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055473] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] CPU 1 irqstacks, hard=f3c94000 soft=f3c96000
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 96000
[ 0.008000] Initializing CPU#1
[ 0.144020] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144016] System has AMD C1E enabled
[ 0.144023] Switch to broadcast mode on CPU1
[ 0.144206] CPU 2 irqstacks, hard=f3cc4000 soft=f3cc6000
[ 0.144207] #2
[ 0.144237] smpboot cpu 2: start_ip = 96000
[ 0.008000] Initializing CPU#2
[ 0.236031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236023] Switch to broadcast mode on CPU2
[ 0.236180] CPU 3 irqstacks, hard=f3cd6000 soft=f3cd8000
[ 0.236182] #3
[ 0.236212] smpboot cpu 3: start_ip = 96000
[ 0.008000] Initializing CPU#3
[ 0.328041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.328033] Switch to broadcast mode on CPU3
[ 0.328149] Brought up 4 CPUs
[ 0.328182] Total of 4 processors activated (27321.48 BogoMIPS).
[ 0.332094] Switch to broadcast mode on CPU0
[ 0.332131] devtmpfs: initialized
[ 0.332149] PM: Registering ACPI NVS region at cff98000 (229376 bytes)
[ 0.332169] print_constraints: dummy:
[ 0.332238] NET: Registered protocol family 16
[ 0.332317] node 0 link 0: io port [1000, ffffff]
[ 0.332320] TOM: 00000000d0000000 aka 3328M
[ 0.332354] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.332357] node 0 link 0: mmio [a0000, bffff]
[ 0.332359] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.332361] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.332363] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.332365] TOM2: 0000000130000000 aka 4864M
[ 0.332398] bus: [00, 07] on node 0 link 0
[ 0.332400] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.332402] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.332403] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.332405] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.332406] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.332413] Extended Config Space enabled on 1 nodes
[ 0.332460] ACPI: bus type pci registered
[ 0.332534] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.332572] PCI: not using MMCONFIG
[ 0.333181] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you
want it NX.
[ 0.333273] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.333308] PCI: Using configuration type 1 for base access
[ 0.333341] PCI: Using configuration type 1 for extended access
[ 0.333693] bio: create slab <bio-0> at 0
[ 0.333693] ACPI: Added _OSI(Module Device)
[ 0.333693] ACPI: Added _OSI(Processor Device)
[ 0.333693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.333693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.333693] ACPI: EC: Look up EC in DSDT
[ 0.360075] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.500527] ACPI: Interpreter enabled
[ 0.500566] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.500755] ACPI: Using IOAPIC for interrupt routing
[ 0.500801] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.502081] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.502118] PCI: Using MMCONFIG for extended config space
[ 0.508249] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.508363] ACPI: No dock devices found.
[ 0.508396] HEST: Table not found.
[ 0.508431] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.508579] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.508720] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.508755] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.508789] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.508826] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 0.508863] pci_root PNP0A03:00: host bridge window [mem
0xd0000000-0xdfffffff]
[ 0.508899] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff]
[ 0.508946] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.508987] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.509016] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.509018] pci 0000:00:02.0: PME# disabled
[ 0.509032] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.509059] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.509061] pci 0000:00:06.0: PME# disabled
[ 0.509071] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[ 0.509098] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.509100] pci 0000:00:07.0: PME# disabled
[ 0.509111] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.509139] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.509141] pci 0000:00:09.0: PME# disabled
[ 0.509151] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.509179] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.509181] pci 0000:00:0a.0: PME# disabled
[ 0.509200] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.509215] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.509222] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.509229] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.509236] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.509243] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.509250] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff]
[ 0.509293] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.509303] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
[ 0.509354] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.509368] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.509427] pci 0000:00:12.2: supports D1 D2
[ 0.509428] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.509431] pci 0000:00:12.2: PME# disabled
[ 0.509446] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.509456] pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff]
[ 0.509508] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.509522] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.509580] pci 0000:00:13.2: supports D1 D2
[ 0.509582] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.509585] pci 0000:00:13.2: PME# disabled
[ 0.509600] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.509655] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.509671] pci 0000:00:14.2: reg 10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
[ 0.509718] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.509721] pci 0000:00:14.2: PME# disabled
[ 0.509731] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.509786] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.509816] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.509826] pci 0000:00:14.5: reg 10: [mem 0xfe6fc000-0xfe6fcfff]
[ 0.509874] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.509884] pci 0000:00:16.0: reg 10: [mem 0xfe6f3000-0xfe6f3fff]
[ 0.509935] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.509949] pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff]
[ 0.510008] pci 0000:00:16.2: supports D1 D2
[ 0.510009] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.510012] pci 0000:00:16.2: PME# disabled
[ 0.510026] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.510039] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.510049] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.510059] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.510072] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.510111] pci 0000:01:00.0: [1002:9490] type 0 class 0x000300
[ 0.510122] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.510131] pci 0000:01:00.0: reg 18: [mem 0xfe7f0000-0xfe7fffff 64bit]
[ 0.510138] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 0.510148] pci 0000:01:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref]
[ 0.510174] pci 0000:01:00.0: supports D1 D2
[ 0.510191] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.510202] pci 0000:01:00.1: reg 10: [mem 0xfe7ec000-0xfe7effff 64bit]
[ 0.510250] pci 0000:01:00.1: supports D1 D2
[ 0.516047] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.516084] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.516086] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.516089] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.516125] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.516139] pci 0000:02:00.0: reg 10: [mem 0xfe8fe000-0xfe8fffff 64bit]
[ 0.516206] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.516209] pci 0000:02:00.0: PME# disabled
[ 0.524048] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.524085] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.524132] pci 0000:03:00.0: [1106:3403] type 0 class 0x000c00
[ 0.524161] pci 0000:03:00.0: reg 10: [mem 0xfe9ff800-0xfe9fffff 64bit]
[ 0.524176] pci 0000:03:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.524298] pci 0000:03:00.0: supports D2
[ 0.524299] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.524304] pci 0000:03:00.0: PME# disabled
[ 0.532054] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.532090] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.532092] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.532138] pci 0000:04:00.0: [1106:0415] type 0 class 0x000101
[ 0.532160] pci 0000:04:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.532174] pci 0000:04:00.0: reg 14: [io 0xd880-0xd883]
[ 0.532189] pci 0000:04:00.0: reg 18: [io 0xd800-0xd807]
[ 0.532203] pci 0000:04:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.532218] pci 0000:04:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.532246] pci 0000:04:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.532318] pci 0000:04:00.0: supports D1 D2
[ 0.532320] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.532325] pci 0000:04:00.0: PME# disabled
[ 0.540053] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.540089] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.540091] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.540128] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.540141] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.540160] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.540172] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.540180] pci 0000:05:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.540225] pci 0000:05:00.0: supports D1 D2
[ 0.540227] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.540230] pci 0000:05:00.0: PME# disabled
[ 0.548050] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.548087] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.548089] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.548092] pci 0000:00:0a.0: bridge window [mem
0xfdf00000-0xfdffffff 64bit pref]
[ 0.548139] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.548179] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.548180] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.548182] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.548184] pci 0000:00:14.4: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
[ 0.548186] pci 0000:00:14.4: bridge window [mem
0xd0000000-0xdfffffff] (subtractive decode)
[ 0.548188] pci 0000:00:14.4: bridge window [mem
0xf0000000-0xfebfffff] (subtractive decode)
[ 0.548200] pci_bus 0000:00: on NUMA node 0
[ 0.548204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.548312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.548333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.548351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.548368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.548388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.548408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.548503] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.548628] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.552077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.552491] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.552905] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.553319] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
[ 0.553694] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.554122] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.554549] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.554975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.555438] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.555438] vgaarb: loaded
[ 0.555438] vgaarb: bridge control possible 0000:01:00.0
[ 0.555438] PCI: Using ACPI for IRQ routing
[ 0.555438] PCI: pci_cache_line_size set to 64 bytes
[ 0.555438] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.555438] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.555438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.555438] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.557054] Switching to clocksource hpet
[ 0.558067] pnp: PnP ACPI init
[ 0.558109] ACPI: bus type pnp registered
[ 0.558204] pnp 00:00: [bus 00-ff]
[ 0.558206] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.558208] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.558209] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.558211] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.558212] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.558214] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.558215] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.558243] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.558295] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.558297] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.558327] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558383] pnp 00:02: [dma 4]
[ 0.558384] pnp 00:02: [io 0x0000-0x000f]
[ 0.558386] pnp 00:02: [io 0x0081-0x0083]
[ 0.558387] pnp 00:02: [io 0x0087]
[ 0.558388] pnp 00:02: [io 0x0089-0x008b]
[ 0.558390] pnp 00:02: [io 0x008f]
[ 0.558391] pnp 00:02: [io 0x00c0-0x00df]
[ 0.558411] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.558417] pnp 00:03: [io 0x0070-0x0071]
[ 0.558423] pnp 00:03: [irq 8]
[ 0.558442] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.558446] pnp 00:04: [io 0x0061]
[ 0.558463] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.558468] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.558471] pnp 00:05: [irq 13]
[ 0.558491] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.558944] pnp 00:06: [io 0x0378-0x037f]
[ 0.558947] pnp 00:06: [irq 7]
[ 0.558948] pnp 00:06: [dma 0 disabled]
[ 0.558948] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.558948] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.558948] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.558948] pnp 00:08: [io 0x0060]
[ 0.558948] pnp 00:08: [io 0x0064]
[ 0.558948] pnp 00:08: [irq 1]
[ 0.558948] pnp 00:08: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 0.558948] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.558948] pnp 00:09: [irq 4]
[ 0.558948] pnp 00:09: [dma 0 disabled]
[ 0.558948] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.558948] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.558948] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.558948] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.558948] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.558948] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558948] pnp 00:0b: [io 0x0010-0x001f]
[ 0.558948] pnp 00:0b: [io 0x0022-0x003f]
[ 0.558948] pnp 00:0b: [io 0x0062-0x0063]
[ 0.558948] pnp 00:0b: [io 0x0065-0x006f]
[ 0.558948] pnp 00:0b: [io 0x0072-0x007f]
[ 0.558948] pnp 00:0b: [io 0x0080]
[ 0.558948] pnp 00:0b: [io 0x0084-0x0086]
[ 0.558948] pnp 00:0b: [io 0x0088]
[ 0.558948] pnp 00:0b: [io 0x008c-0x008e]
[ 0.558948] pnp 00:0b: [io 0x0090-0x009f]
[ 0.558948] pnp 00:0b: [io 0x00a2-0x00bf]
[ 0.558948] pnp 00:0b: [io 0x00b1]
[ 0.558948] pnp 00:0b: [io 0x00e0-0x00ef]
[ 0.558948] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.558948] pnp 00:0b: [io 0x040b]
[ 0.558948] pnp 00:0b: [io 0x04d6]
[ 0.558948] pnp 00:0b: [io 0x0c00-0x0c01]
[ 0.558948] pnp 00:0b: [io 0x0c14]
[ 0.558948] pnp 00:0b: [io 0x0c50-0x0c51]
[ 0.558948] pnp 00:0b: [io 0x0c52]
[ 0.558948] pnp 00:0b: [io 0x0c6c]
[ 0.558948] pnp 00:0b: [io 0x0c6f]
[ 0.558948] pnp 00:0b: [io 0x0cd0-0x0cd1]
[ 0.558948] pnp 00:0b: [io 0x0cd2-0x0cd3]
[ 0.558948] pnp 00:0b: [io 0x0cd4-0x0cd5]
[ 0.558948] pnp 00:0b: [io 0x0cd6-0x0cd7]
[ 0.558948] pnp 00:0b: [io 0x0cd8-0x0cdf]
[ 0.558948] pnp 00:0b: [io 0x0b00-0x0b3f]
[ 0.558948] pnp 00:0b: [io 0x0800-0x089f]
[ 0.558948] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.558948] pnp 00:0b: [io 0x0b00-0x0b1f]
[ 0.558948] pnp 00:0b: [io 0x0b20-0x0b3f]
[ 0.558948] pnp 00:0b: [io 0x0900-0x090f]
[ 0.558948] pnp 00:0b: [io 0x0910-0x091f]
[ 0.558948] pnp 00:0b: [io 0xfe00-0xfefe]
[ 0.558948] pnp 00:0b: [io 0x0060-0x005f disabled]
[ 0.558948] pnp 00:0b: [io 0x0064-0x0063 disabled]
[ 0.558948] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.558948] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[ 0.558948] pnp 00:0b: [mem 0xfec10000-0xfec1001f]
[ 0.558948] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.558948] pnp 00:0b: [mem 0xfed80000-0xfed80fff]
[ 0.558948] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.558948] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.558950] system 00:0b: [io 0x040b] has been reserved
[ 0.558984] system 00:0b: [io 0x04d6] has been reserved
[ 0.559018] system 00:0b: [io 0x0c00-0x0c01] has been reserved
[ 0.559052] system 00:0b: [io 0x0c14] has been reserved
[ 0.559086] system 00:0b: [io 0x0c50-0x0c51] has been reserved
[ 0.559120] system 00:0b: [io 0x0c52] has been reserved
[ 0.559154] system 00:0b: [io 0x0c6c] has been reserved
[ 0.559188] system 00:0b: [io 0x0c6f] has been reserved
[ 0.559223] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
[ 0.559257] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
[ 0.559291] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
[ 0.559326] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
[ 0.559360] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
[ 0.559394] system 00:0b: [io 0x0b00-0x0b3f] has been reserved
[ 0.559429] system 00:0b: [io 0x0800-0x089f] has been reserved
[ 0.559463] system 00:0b: [io 0x0b00-0x0b1f] has been reserved
[ 0.559497] system 00:0b: [io 0x0b20-0x0b3f] has been reserved
[ 0.559532] system 00:0b: [io 0x0900-0x090f] has been reserved
[ 0.559566] system 00:0b: [io 0x0910-0x091f] has been reserved
[ 0.559601] system 00:0b: [io 0xfe00-0xfefe] has been reserved
[ 0.559636] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.559670] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.559705] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.559740] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.559775] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.559865] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.559867] pnp 00:0c: [io 0x0230-0x023f]
[ 0.559868] pnp 00:0c: [io 0x0290-0x029f]
[ 0.559870] pnp 00:0c: [io 0x0300-0x030f]
[ 0.559871] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.559904] system 00:0c: [io 0x0230-0x023f] has been reserved
[ 0.559939] system 00:0c: [io 0x0290-0x029f] has been reserved
[ 0.559973] system 00:0c: [io 0x0300-0x030f] has been reserved
[ 0.560021] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.560056] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.560082] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.560113] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.560148] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.560213] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.560215] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.560216] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.560218] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.560219] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.560254] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.560288] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.560323] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.560358] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.560393] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.560428] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.560485] pnp: PnP ACPI: found 15 devices
[ 0.560518] ACPI: ACPI bus type pnp unregistered
[ 0.560552] PnPBIOS: Disabled by ACPI PNP
[ 0.597055] PCI: max bus depth: 1 pci_try_num: 2
[ 0.597073] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.597108] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.597142] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.597177] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.597215] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.597250] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.597286] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.597320] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.597355] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.597391] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.597425] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.597459] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.597496] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.597529] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.597564] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.597599] pci 0000:00:0a.0: bridge window [mem
0xfdf00000-0xfdffffff 64bit pref]
[ 0.597637] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[ 0.597685] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.597720] pci 0000:00:02.0: setting latency timer to 64
[ 0.597723] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.597758] pci 0000:00:06.0: setting latency timer to 64
[ 0.597763] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.597798] pci 0000:00:07.0: setting latency timer to 64
[ 0.597804] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.597838] pci 0000:00:09.0: setting latency timer to 64
[ 0.597841] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.597876] pci 0000:00:0a.0: setting latency timer to 64
[ 0.597881] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.597883] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.597884] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.597886] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.597887] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.597889] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.597891] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.597892] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.597894] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.597896] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.597897] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.597899] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.597900] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.597902] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.597904] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.597905] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.597907] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 0.597909] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.597910] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.597912] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.597913] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.597915] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.597916] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.597990] NET: Registered protocol family 2
[ 0.598071] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.598275] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.598617] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.598806] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.598840] TCP reno registered
[ 0.598874] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.598912] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.599026] NET: Registered protocol family 1
[ 0.599077] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.599125] pci 0000:00:12.0: PCI INT A disabled
[ 0.599163] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.599205] pci 0000:00:12.2: PCI INT B disabled
[ 0.599242] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.599285] pci 0000:00:13.0: PCI INT A disabled
[ 0.599322] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.599364] pci 0000:00:13.2: PCI INT B disabled
[ 0.599406] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.599449] pci 0000:00:14.5: PCI INT C disabled
[ 0.599486] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.599529] pci 0000:00:16.0: PCI INT A disabled
[ 0.599566] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.599608] pci 0000:00:16.2: PCI INT B disabled
[ 0.599647] pci 0000:01:00.0: Boot video device
[ 0.599654] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.599700] pci 0000:02:00.0: PCI INT A disabled
[ 0.599741] PCI: CLS 64 bytes, default 64
[ 0.599777] Unpacking initramfs...
[ 0.809240] Freeing initrd memory: 12096k freed
[ 0.812205] IBS: LVT offset 1 assigned
[ 0.812252] perf: AMD IBS detected (0x0000001f)
[ 0.812455] audit: initializing netlink socket (disabled)
[ 0.812502] type=2000 audit(1340651033.808:1): initialized
[ 0.827056] highmem bounce pool size: 64 pages
[ 0.827094] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.835675] VFS: Disk quotas dquot_6.5.2
[ 0.835737] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.835820] msgmni has been set to 1434
[ 0.836023] alg: No test for stdrng (krng)
[ 0.836088] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.836126] io scheduler noop registered
[ 0.836159] io scheduler deadline registered
[ 0.836208] io scheduler cfq registered (default)
[ 0.836311] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.836334] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.836383] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.836400] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.836438] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.836454] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.836492] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.836509] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X
[ 0.836548] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.836565] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 0.836621] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.836656] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.836690] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.836725] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.836735] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.836770] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.836805] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.836814] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.836848] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.836883] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.836891] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.836926] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.836960] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.836969] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 0.837004] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.837038] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 0.837050] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.837099] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.837134] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.837358] ERST: Table is not found!
[ 0.837391] GHES: HEST is not enabled!
[ 0.837431] isapnp: Scanning for PnP cards...
[ 1.190929] isapnp: No Plug & Play device found
[ 1.191034] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.211406] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.232275] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.272260] Linux agpgart interface v0.103
[ 1.272577] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.272612] i8042: PNP: PS/2 appears to have AUX port disabled, if
this is incorrect please boot with i8042.nopnp
[ 1.272761] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.272911] mousedev: PS/2 mouse device common for all mice
[ 1.272967] rtc_cmos 00:03: RTC can wake from S4
[ 1.273082] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.273137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.273183] cpuidle: using governor ladder
[ 1.275827] cpuidle: using governor menu
[ 1.276045] TCP cubic registered
[ 1.276127] NET: Registered protocol family 10
[ 1.276523] Mobile IPv6
[ 1.276556] NET: Registered protocol family 17
[ 1.276590] Registering the dns_resolver key type
[ 1.276635] Using IPI No-Shortcut mode
[ 1.276764] PM: Hibernation image not present or could not be loaded.
[ 1.276770] registered taskstats version 1
[ 1.281333] rtc_cmos 00:03: setting system clock to 2012-06-25
19:03:55 UTC (1340651035)
[ 1.281393] Initializing network drop monitor service
[ 1.281507] Freeing unused kernel memory: 416k freed
[ 1.281652] Write protecting the kernel text: 2848k
[ 1.281710] Write protecting the kernel read-only data: 1092k
[ 1.281745] NX-protecting the kernel data: 3296k
[ 1.299185] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.311069] udevd[60]: starting version 175
[ 1.321038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.321090] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.321145] r8169 0000:05:00.0: setting latency timer to 64
[ 1.321190] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 1.321531] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8216000,
48:5b:39:47:35:a1, XID 0c100000 IRQ 45
[ 1.321569] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 1.323088] usbcore: registered new interface driver usbfs
[ 1.323139] usbcore: registered new interface driver hub
[ 1.327442] SCSI subsystem initialized
[ 1.331269] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 19 (level,
low) -> IRQ 19
[ 1.331314] firewire_ohci 0000:03:00.0: setting latency timer to 64
[ 1.334183] [drm] Initialized drm 1.1.0 20060810
[ 1.337366] usbcore: registered new device driver usb
[ 1.337692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.337745] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.337795] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.337843] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
bus number 1
[ 1.337886] ehci_hcd 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.337933] QUIRK: Enable AMD PLL fix
[ 1.337941] ehci_hcd 0000:00:12.2: debug port 1
[ 1.337994] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 1.339618] libata version 3.00 loaded.
[ 1.344910] [drm] radeon kernel modesetting enabled.
[ 1.345012] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.345051] radeon 0000:01:00.0: setting latency timer to 64
[ 1.345115] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.345176] [drm] initializing kernel modesetting (RV730
0x1002:0x9490 0x174B:0xE100).
[ 1.345176] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.345179] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.345199] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 2
[ 1.345347] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfe8fe000
[ 1.345356] [drm] register mmio base: 0xFE7F0000
[ 1.345357] [drm] register mmio size: 65536
[ 1.345487] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 1.345492] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1.345496] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 1.345500] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 1.345504] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 1.345567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.345603] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.345641] usb usb2: Product: xHCI Host Controller
[ 1.345675] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.345710] usb usb2: SerialNumber: 0000:02:00.0
[ 1.345811] xHCI xhci_add_endpoint called for root hub
[ 1.345813] xHCI xhci_check_bandwidth called for root hub
[ 1.345836] hub 2-0:1.0: USB hub found
[ 1.345872] hub 2-0:1.0: 2 ports detected
[ 1.345958] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.345996] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 3
[ 1.348049] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.348117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.348165] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.348215] usb usb1: Product: EHCI Host Controller
[ 1.348260] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.348308] usb usb1: SerialNumber: 0000:00:12.2
[ 1.348562] hub 1-0:1.0: USB hub found
[ 1.348611] hub 1-0:1.0: 5 ports detected
[ 1.348698] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.348730] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.348748] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.348804] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.348841] usb usb3: Product: xHCI Host Controller
[ 1.348874] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.348908] usb usb3: SerialNumber: 0000:02:00.0
[ 1.348998] xHCI xhci_add_endpoint called for root hub
[ 1.349000] xHCI xhci_check_bandwidth called for root hub
[ 1.349019] hub 3-0:1.0: USB hub found
[ 1.349059] hub 3-0:1.0: 2 ports detected
[ 1.349143] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 4
[ 1.349184] ehci_hcd 0000:00:13.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.349236] ehci_hcd 0000:00:13.2: debug port 1
[ 1.349279] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400
[ 1.349627] ATOM BIOS: RV730
[ 1.349677] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 -
0x000000001FFFFFFF (512M used)
[ 1.349715] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 -
0x000000003FFFFFFF
[ 1.353887] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.353924] [drm] RAM width 128bits DDR
[ 1.354013] [TTM] Zone kernel: Available graphics memory: 367436 kiB.
[ 1.354049] [TTM] Zone highmem: Available graphics memory: 2008656 kiB.
[ 1.354084] [TTM] Initializing pool allocator.
[ 1.354138] [drm] radeon: 512M of VRAM memory ready
[ 1.354174] [drm] radeon: 512M of GTT memory ready.
[ 1.354220] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.354257] [drm] Driver supports precise vblank timestamp query.
[ 1.354323] radeon 0000:01:00.0: irq 51 for MSI/MSI-X
[ 1.354328] radeon 0000:01:00.0: radeon: using MSI.
[ 1.354386] [drm] radeon: irq initialized.
[ 1.354422] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.354940] [drm] Loading RV730 Microcode
[ 1.360024] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.360076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.360114] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.360150] usb usb4: Product: EHCI Host Controller
[ 1.360187] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.360220] usb usb4: SerialNumber: 0000:00:13.2
[ 1.360338] hub 4-0:1.0: USB hub found
[ 1.360373] hub 4-0:1.0: 5 ports detected
[ 1.360465] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.360513] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.360551] ehci_hcd 0000:00:16.2: new USB bus registered, assigned
bus number 5
[ 1.360592] ehci_hcd 0000:00:16.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.360644] ehci_hcd 0000:00:16.2: debug port 1
[ 1.360686] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000
[ 1.361443] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.361513] radeon 0000:01:00.0: WB enabled
[ 1.372037] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.372089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.372124] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.372161] usb usb5: Product: EHCI Host Controller
[ 1.372194] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.372228] usb usb5: SerialNumber: 0000:00:16.2
[ 1.372343] hub 5-0:1.0: USB hub found
[ 1.372380] hub 5-0:1.0: 4 ports detected
[ 1.372470] ahci 0000:00:11.0: version 3.0
[ 1.372481] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.372614] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6
Gbps 0x3f impl SATA mode
[ 1.372652] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led
clo pmp pio slum part
[ 1.372737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.373263] scsi0 : ahci
[ 1.373374] scsi1 : ahci
[ 1.373538] scsi2 : ahci
[ 1.373620] scsi3 : ahci
[ 1.373693] scsi4 : ahci
[ 1.373766] scsi5 : ahci
[ 1.373836] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6ffd00 irq 19
[ 1.373874] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6ffd80 irq 19
[ 1.373911] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6ffe00 irq 19
[ 1.373949] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6ffe80 irq 19
[ 1.373986] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6fff00 irq 19
[ 1.374023] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port
0xfe6fff80 irq 19
[ 1.374078] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.374127] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.374166] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
bus number 6
[ 1.374229] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000
[ 1.392074] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.407381] [drm] ring test succeeded in 1 usecs
[ 1.407487] [drm] radeon: ib pool ready.
[ 1.407565] [drm] ib test succeeded in 0 usecs
[ 1.407792] [drm] Radeon Display Connectors
[ 1.407827] [drm] Connector 0:
[ 1.407861] [drm] VGA
[ 1.407896] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28
0x7e2c 0x7e2c
[ 1.407935] [drm] Encoders:
[ 1.407970] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.408041] [drm] Connector 1:
[ 1.408074] [drm] HDMI-A
[ 1.408106] [drm] HPD2
[ 1.408138] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18
0x7f1c 0x7f1c
[ 1.410788] [drm] Encoders:
[ 1.410820] [drm] DFP2: INTERNAL_UNIPHY1
[ 1.410853] [drm] Connector 2:
[ 1.410885] [drm] DVI-I
[ 1.410917] [drm] HPD1
[ 1.410950] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
0x7e4c 0x7e4c
[ 1.410986] [drm] Encoders:
[ 1.411018] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.411051] [drm] DFP1: INTERNAL_UNIPHY
[ 1.411099] [drm] Internal thermal controller with fan control
[ 1.411162] [drm] radeon: power management initialized
[ 1.436085] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.436123] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.436162] usb usb6: Product: OHCI Host Controller
[ 1.436196] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.436232] usb usb6: SerialNumber: 0000:00:12.0
[ 1.436349] hub 6-0:1.0: USB hub found
[ 1.436388] hub 6-0:1.0: 5 ports detected
[ 1.436466] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.436512] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.436550] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 7
[ 1.436598] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000
[ 1.494921] [drm] fb mappable at 0xD0142000
[ 1.494956] [drm] vram apper at 0xD0000000
[ 1.494989] [drm] size 7680000
[ 1.495021] [drm] fb depth is 24
[ 1.495053] [drm] pitch is 6400
[ 1.495152] fbcon: radeondrmfb (fb0) is primary device
[ 1.496049] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.496051] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.496053] usb usb7: Product: OHCI Host Controller
[ 1.496054] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.496055] usb usb7: SerialNumber: 0000:00:13.0
[ 1.496142] hub 7-0:1.0: USB hub found
[ 1.496147] hub 7-0:1.0: 5 ports detected
[ 1.496191] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.496204] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.496209] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
bus number 8
[ 1.496220] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe6fc000
[ 1.556080] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.556082] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.556083] usb usb8: Product: OHCI Host Controller
[ 1.556084] usb usb8: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.556085] usb usb8: SerialNumber: 0000:00:14.5
[ 1.556167] hub 8-0:1.0: USB hub found
[ 1.556172] hub 8-0:1.0: 2 ports detected
[ 1.556214] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.556225] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.556230] ohci_hcd 0000:00:16.0: new USB bus registered, assigned
bus number 9
[ 1.556241] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6f3000
[ 1.616084] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.616086] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.616087] usb usb9: Product: OHCI Host Controller
[ 1.616088] usb usb9: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.616089] usb usb9: SerialNumber: 0000:00:16.0
[ 1.616169] hub 9-0:1.0: USB hub found
[ 1.616173] hub 9-0:1.0: 4 ports detected
[ 1.692122] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.696107] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.808073] Refined TSC clocksource calibration: 3415.175 MHz.
[ 1.808077] Switching to clocksource tsc
[ 1.864083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.864103] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.868082] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.872071] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.892116] firewire_core: created device fw0: GUID 001e8c0000d59af4, S400
[ 1.908037] ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 1.908039] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.912099] ata2.00: ATA-7: ST3300622AS, 3.AAE, max UDMA/133
[ 1.912101] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.918903] Console: switching to colour frame buffer device 200x75
[ 1.919325] ata5.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133
[ 1.919326] ata5.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.923046] ata3.00: ATA-7: ST3300622AS, 3.AAE, max UDMA/133
[ 1.923047] ata3.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.926923] fb0: radeondrmfb frame buffer device
[ 1.926924] drm: registered panic notifier
[ 1.926978] [drm] Initialized radeon 2.12.0 20080528 for
0000:01:00.0 on minor 0
[ 1.966341] ata1.00: configured for UDMA/133
[ 1.968045] scsi 0:0:0:0: Direct-Access ATA ST3320620AS
3.AA PQ: 0 ANSI: 5
[ 1.970439] ata2.00: configured for UDMA/133
[ 1.972186] scsi 1:0:0:0: Direct-Access ATA ST3300622AS
3.AA PQ: 0 ANSI: 5
[ 1.977660] ata5.00: configured for UDMA/133
[ 1.983919] ata3.00: configured for UDMA/133
[ 1.985638] scsi 2:0:0:0: Direct-Access ATA ST3300622AS
3.AA PQ: 0 ANSI: 5
[ 1.987431] scsi 4:0:0:0: Direct-Access ATA ST3300622AS
3.AA PQ: 0 ANSI: 5
[ 1.992491] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks:
(320 GB/298 GiB)
[ 1.994213] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks:
(300 GB/279 GiB)
[ 1.994216] sd 2:0:0:0: [sdc] 586072368 512-byte logical blocks:
(300 GB/279 GiB)
[ 1.994243] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.994245] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.994283] sd 0:0:0:0: [sda] Write Protect is off
[ 1.994286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.994296] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.994320] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.003756] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.005335] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.005348] sd 4:0:0:0: [sdd] 586072368 512-byte logical blocks:
(300 GB/279 GiB)
[ 2.006925] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.008576] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.010142] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.010153] sd 4:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.014347] sda: sda1 sda2
[ 2.016154] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.023588] sdc: sdc1 sdc2 sdc3
[ 2.025503] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.025627] sdd: sdd1 sdd2 sdd3
[ 2.026752] sdb: sdb1 sdb2 sdb3
[ 2.030422] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.030645] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.562102] md: raid1 personality registered for level 1
[ 5.632067] raid6: int32x1 1334 MB/s
[ 5.700066] raid6: int32x2 1148 MB/s
[ 5.768050] raid6: int32x4 1229 MB/s
[ 5.836093] raid6: int32x8 706 MB/s
[ 5.904034] raid6: mmxx1 2892 MB/s
[ 5.972027] raid6: mmxx2 5515 MB/s
[ 6.040031] raid6: sse1x1 2524 MB/s
[ 6.108026] raid6: sse1x2 4260 MB/s
[ 6.176034] raid6: sse2x1 4712 MB/s
[ 6.244030] raid6: sse2x2 8012 MB/s
[ 6.245584] raid6: using algorithm sse2x2 (8012 MB/s)
[ 6.247308] async_tx: api initialized (async)
[ 6.249034] xor: automatically using best checksumming function: pIII_sse
[ 6.268026] pIII_sse : 13142.000 MB/sec
[ 6.269630] xor: using function: pIII_sse (13142.000 MB/sec)
[ 6.271872] md: raid6 personality registered for level 6
[ 6.273449] md: raid5 personality registered for level 5
[ 6.274984] md: raid4 personality registered for level 4
[ 6.281396] mdadm: sending ioctl 800c0910 to a partition!
[ 6.282988] mdadm: sending ioctl 800c0910 to a partition!
[ 6.284612] mdadm: sending ioctl 1261 to a partition!
[ 6.286199] mdadm: sending ioctl 1261 to a partition!
[ 6.288078] mdadm: sending ioctl 1261 to a partition!
[ 6.289672] mdadm: sending ioctl 1261 to a partition!
[ 6.305449] mdadm: sending ioctl 1261 to a partition!
[ 6.307020] mdadm: sending ioctl 1261 to a partition!
[ 6.315965] mdadm: sending ioctl 1261 to a partition!
[ 6.317493] mdadm: sending ioctl 1261 to a partition!
[ 6.320520] md: md0 stopped.
[ 6.322713] md: bind<sdc1>
[ 6.324757] md: bind<sdd1>
[ 6.326383] md: bind<sdb1>
[ 6.328615] bio: create slab <bio-1> at 1
[ 6.330105] md/raid1:md0: active with 3 out of 3 mirrors
[ 6.331549] md0: detected capacity change from 0 to 49217536
[ 6.342210] md0: unknown partition table
[ 6.374645] md: md1 stopped.
[ 6.377459] md: bind<sdb3>
[ 6.379019] md: bind<sdc3>
[ 6.385781] md: bind<sdd3>
[ 6.387287] md: bind<sda2>
[ 6.389374] md/raid:md1: device sda2 operational as raid disk 0
[ 6.390681] md/raid:md1: device sdd3 operational as raid disk 3
[ 6.391981] md/raid:md1: device sdc3 operational as raid disk 2
[ 6.393275] md/raid:md1: device sdb3 operational as raid disk 1
[ 6.394766] md/raid:md1: allocated 4216kB
[ 6.396053] md/raid:md1: raid level 6 active with 4 out of 4
devices, algorithm 2
[ 6.397352] RAID conf printout:
[ 6.397354] --- level:6 rd:4 wd:4
[ 6.397355] disk 0, o:1, dev:sda2
[ 6.397356] disk 1, o:1, dev:sdb3
[ 6.397357] disk 2, o:1, dev:sdc3
[ 6.397359] disk 3, o:1, dev:sdd3
[ 6.397516] created bitmap (9 pages) for device md1
[ 6.399281] md1: bitmap initialized from disk: read 1/1 pages, set
2 of 17287 bits
[ 6.431901] md1: detected capacity change from 0 to 580029906944
[ 6.434253] md1: unknown partition table
[ 6.441502] md: md2 stopped.
[ 6.443723] md: bind<sdb2>
[ 6.445253] md: bind<sdd2>
[ 6.456182] md: bind<sdc2>
[ 6.458258] md/raid1:md2: active with 3 out of 3 mirrors
[ 6.459571] md2: detected capacity change from 0 to 10001866752
[ 6.475829] md2: unknown partition table
[ 6.482172] device-mapper: uevent: version 1.0.3
[ 6.483534] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@redhat.com
[ 6.683420] EXT3-fs (md2): recovery required on readonly filesystem
[ 6.684752] EXT3-fs (md2): write access will be enabled during recovery
[ 7.768047] kjournald starting. Commit interval 5 seconds
[ 7.768067] EXT3-fs (md2): recovery complete
[ 7.768301] EXT3-fs (md2): mounted filesystem with ordered data mode
[ 9.326660] udevd[443]: starting version 175
[ 10.710581] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 10.713392] ACPI: Power Button [PWRB]
[ 10.716203] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.719060] ACPI: Power Button [PWRF]
[ 10.740497] ACPI: resource piix4_smbus [io 0x0b00-0x0b07]
conflicts with ACPI region SMRG [io 0xb00-0xb2f]
[ 10.743257] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 10.746121] wmi: Mapper loaded
[ 10.772094] parport_pc 00:06: reported by Plug and Play ACPI
[ 10.774881] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.786821] ACPI: processor limited to max C-state 1
[ 10.797497] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 10.801408] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 10.804185] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 11.018168] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 11.076760] input: HDA ATI SB Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 11.080571] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 11.083328] snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X
[ 11.083345] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 11.110401] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.113163] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
[ 11.285827] scsi_verify_blk_ioctl: 154 callbacks suppressed
[ 11.288556] mdadm: sending ioctl 800c0910 to a partition!
[ 11.291250] mdadm: sending ioctl 800c0910 to a partition!
[ 11.291275] mdadm: sending ioctl 1261 to a partition!
[ 11.291277] mdadm: sending ioctl 1261 to a partition!
[ 11.299131] mdadm: sending ioctl 1261 to a partition!
[ 11.301556] mdadm: sending ioctl 800c0910 to a partition!
[ 11.301558] mdadm: sending ioctl 800c0910 to a partition!
[ 11.301562] mdadm: sending ioctl 1261 to a partition!
[ 11.301563] mdadm: sending ioctl 1261 to a partition!
[ 11.311975] mdadm: sending ioctl 1261 to a partition!
[ 12.039837] EXT3-fs (md2): using internal journal
[ 13.661233] Intel AES-NI instructions are not detected.
[ 13.784583] padlock_sha: VIA PadLock Hash Engine not detected.
[ 14.390602] Adding 4194300k swap on /dev/mapper/c-swap. Priority:1
extents:1 across:4194300k
[ 24.072798] kjournald starting. Commit interval 30 seconds
[ 24.091881] EXT3-fs (dm-2): using internal journal
[ 24.093943] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 24.120424] kjournald starting. Commit interval 30 seconds
[ 24.132876] EXT3-fs (dm-3): using internal journal
[ 24.134889] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 24.163589] kjournald starting. Commit interval 30 seconds
[ 24.174429] EXT3-fs (dm-4): using internal journal
[ 24.176417] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 24.210507] kjournald starting. Commit interval 30 seconds
[ 24.210822] EXT3-fs (dm-5): using internal journal
[ 24.210825] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 26.355597] r8169 0000:05:00.0: eth0: link down
[ 26.357412] r8169 0000:05:00.0: eth0: link down
[ 26.359402] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.005090] r8169 0000:05:00.0: eth0: link up
[ 28.007021] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.252599] RPC: Registered named UNIX socket transport module.
[ 29.254446] RPC: Registered udp transport module.
[ 29.256294] RPC: Registered tcp transport module.
[ 29.258099] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.308074] FS-Cache: Loaded
[ 29.365187] FS-Cache: Netfs 'nfs' registered for caching
[ 29.387870] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.619753] fuse init (API version 7.17)
[ 30.644050] ttyS1: LSR safety check engaged!
[ 30.646474] ttyS1: LSR safety check engaged!
[ 30.874351] NET: Registered protocol family 15
[ 30.882732] alg: No test for cipher_null (cipher_null-generic)
[ 30.884636] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 30.886594] alg: No test for digest_null (digest_null-generic)
[ 30.888566] alg: No test for compress_null (compress_null-generic)
[ 30.900504] padlock_sha: VIA PadLock Hash Engine not detected.
[ 33.917170] IPv6 over IPv4 tunneling driver
[ 33.968585] tun: Universal TUN/TAP device driver, 1.6
[ 33.970397] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 36.078432] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.832842] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor
(4 cpu cores) (version 2.20.00)
[ 38.834685] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 38.836567] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 38.838390] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 38.838395] powernow-k8: 3 : pstate 3 (800 MHz)
[ 38.941214] Bluetooth: Core ver 2.16
[ 38.948585] NET: Registered protocol family 31
[ 38.956130] Bluetooth: HCI device and connection manager initialized
[ 38.956140] Bluetooth: HCI socket layer initialized
[ 38.956145] Bluetooth: L2CAP socket layer initialized
[ 38.956162] Bluetooth: SCO socket layer initialized
[ 39.073147] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.074857] Bluetooth: BNEP filters: protocol multicast
[ 39.085897] Bluetooth: RFCOMM TTY layer initialized
[ 39.093006] Bluetooth: RFCOMM socket layer initialized
[ 39.100106] Bluetooth: RFCOMM ver 1.11
[ 39.479361] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 39.538192] NFSD: starting 90-second grace period
[ 40.088805] lp0: using parport0 (interrupt-driven).
[ 40.135923] ppdev: user-space parallel port driver
[ 1594.921075] ICMPv6 checksum failed
[2a01:0348:0006:00ed:0000:0000:0000:0001 >
2a01:0348:0006:00ed:0000:0000:0000:0002]
[ 9217.276874] pata_via 0000:04:00.0: version 0.3.4
[ 9217.276903] pata_via 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9217.277002] pata_via 0000:04:00.0: setting latency timer to 64
[ 9217.278032] scsi6 : pata_via
[ 9217.278283] scsi7 : pata_via
[ 9217.278684] ata7: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 9217.278693] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 9217.568668] ata7.01: ATAPI: LITE-ON DVDRW SOHW-1693S, KS09, max UDMA/66
[ 9217.584679] ata7.01: configured for PIO4
[ 9217.587263] scsi 6:0:1:0: CD-ROM LITE-ON DVDRW
SOHW-1693S KS09 PQ: 0 ANSI: 5
[ 9217.744263] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 9217.744273] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9217.744597] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 9227.780152] ata7.01: disabled
[ 9227.782001] pata_via 0000:04:00.0: PCI INT A disabled
** Model information
not available
** Loaded modules:
sr_mod
cdrom
ppdev
lp
rfcomm
bnep
bluetooth
rfkill
crc16
powernow_k8
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
xt_multiport
iptable_filter
ip_tables
x_tables
snd_hrtimer
tun
sit
tunnel4
binfmt_misc
deflate
zlib_deflate
ctr
twofish_generic
twofish_i586
twofish_common
camellia
serpent
blowfish_generic
blowfish_common
cast5
des_generic
xcbc
rmd160
sha512_generic
sha1_generic
hmac
crypto_null
af_key
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
hwmon_vid
k8temp
tcp_diag
inet_diag
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_pcm_oss
snd_mixer_oss
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
sp5100_tco
snd
pcspkr
k10temp
processor
evdev
parport_pc
soundcore
asus_atk0110
wmi
i2c_piix4
parport
thermal_sys
button
ext3
mbcache
jbd
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
md_mod
sd_mod
crc_t10dif
ohci_hcd
ata_generic
xhci_hcd
radeon
ahci
libahci
ehci_hcd
power_supply
i2c_algo_bit
drm_kms_helper
ttm
drm
libata
i2c_core
firewire_ohci
scsi_mod
usbcore
usb_common
firewire_core
r8169
crc_itu_t
mii
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host
Bridge [1022:9601]
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:843e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40)
(prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8000 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:841b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00
PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive
decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6f3000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
nee ATI RV730XT [Radeon HD 4670] [1002:9490] (prog-if 00 [VGA
controller])
Subsystem: PC Partner Limited Device [174b:e100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
Subsystem: PC Partner Limited R700 Audio Device [Radeon HD 4000
Series] [174b:aa38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 52
Region 0: Memory at fe7ec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe8fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315
Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:8374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe9ff800 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at c800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
04:00.0 IDE interface [0101]: VIA Technologies, Inc. VT6415 PATA IDE
Host Controller [1106:0415] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO [1043:838f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.106
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.2 3.2.20-1
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
* linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
-- debsums errors found:
dpkg-query: warning: parsing file '/var/lib/dpkg/status' near line
36288 package 'apt-show-source':
missing architecture
dpkg-query: warning: parsing file '/var/lib/dpkg/status' near line
41924 package 'linux-image-2.6.33':
error in Version string 'myxie.1': version number does not start with digit
dpkg-query: warning: parsing file '/var/lib/dpkg/status' near line
69357 package 'funny-manpages':
missing architecture
dpkg-divert: warning: parsing file '/var/lib/dpkg/status' near line
36288 package 'apt-show-source':
missing architecture
dpkg-divert: warning: parsing file '/var/lib/dpkg/status' near line
41924 package 'linux-image-2.6.33':
error in Version string 'myxie.1': version number does not start with digit
dpkg-divert: warning: parsing file '/var/lib/dpkg/status' near line
69357 package 'funny-manpages':
missing architecture
--- End Message ---