Your message dated Sat, 01 May 2021 05:42:56 -0700 (PDT) with message-id <608d4cd0.1c69fb81.bb5c9.bbaa@mx.google.com> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #661335, regarding [3.1.8->3.2.4 regression] Cougar Point: all HDMI outputs silent to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 661335: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661335 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-1-amd64: No HDMI sound on HDA intel with kernel 3.2
- From: Eric Lavarde <bugs.debian.nospam@lavar.de>
- Date: Sun, 26 Feb 2012 15:13:40 +0100
- Message-id: <20120226141340.1861.93267.reportbug@hdvdr.lan>
Package: linux-2.6 Version: 3.2.6-1 Severity: important Hello, since I've upgraded to version 3.2 of the kernel, HDMI sound doesn't work, booting back to 3.1 (exactly 3.1.8-2) it works again. For my tests, I use the following command, directly from the console (no X whatsoever): In relation in both cases to: # aplay -L null Discard all samples (playback) or generate zero samples (capture) sysdefault:CARD=PCH HDA Intel PCH, ALC892 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC892 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output hdmi:CARD=PCH,DEV=1 HDA Intel PCH, HDMI 1 HDMI Audio Output # speaker-test -D front:CARD=PCH,DEV=0 -c2 (sound works in this case under 3.1 and 3.2) # speaker-test -D hdmi:CARD=PCH,DEV=1 -c2 (sound works only under 3.1 and NOT under 3.2) (I don't know what exactly hdmi:CARD=PCH,DEV=0 is but it doesn't work in either cases) I'll attach also the output of alsa-info.sh as recommended in Bug #657302 (exactly http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=657302#20). The same issue was already there in kernel 3.2.4 and, obviously, I haven't touched /var/lib/alsa/asound.state between reboots. I don't know if it's of importance but I'm also using self-compiled kernels (from the Debian sources) and I have the same behavior there. Let me know if you need more info, I'm currently stuck on 3.1. Thanks, Eric -- Package-specific info: ** Version: Linux version 3.2.0-1-amd64 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 SMP Fri Feb 17 05:17:36 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=be935a63-0884-43eb-8220-1182aa00fa33 ro quiet ** Not tainted ** Kernel log: [ 2.689700] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 2.696485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.703524] asus_wmi: ASUS WMI generic driver loaded [ 2.705349] usbcore: registered new interface driver uas [ 2.708162] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input4 [ 2.708445] Initializing USB Mass Storage driver... [ 2.708965] scsi6 : usb-storage 2-1.6:1.0 [ 2.709342] asus_wmi: Initialization: 0x0 [ 2.709367] asus_wmi: BIOS WMI version: 0.9 [ 2.709425] asus_wmi: SFUN value: 0x0 [ 2.709481] usbcore: registered new interface driver usb-storage [ 2.709483] USB Mass Storage support registered. [ 2.709730] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5 [ 2.709853] IR NEC protocol handler initialized [ 2.711045] asus_wmi: Backlight controlled by ACPI video driver [ 2.711574] IR RC5(x) protocol handler initialized [ 2.712560] IR RC6 protocol handler initialized [ 2.713675] IR JVC protocol handler initialized [ 2.715033] IR Sony protocol handler initialized [ 2.715251] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 2.715253] [drm] MTRR allocation failed. Graphics performance may suffer. [ 2.715512] i915 0000:00:02.0: irq 53 for MSI/MSI-X [ 2.715517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.715518] [drm] Driver supports precise vblank timestamp query. [ 2.715545] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.716372] IR MCE Keyboard/mouse protocol handler initialized [ 2.718212] lirc_dev: IR Remote Control driver registered, major 250 [ 2.718698] IR LIRC bridge handler initialized [ 2.736922] Registered IR keymap rc-imon-pad [ 2.737023] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/rc/rc0/input6 [ 2.737125] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/rc/rc0 [ 2.745069] imon 2-1.7:1.0: iMON device (15c2:0038, intf0) on usb<2:4> initialized [ 2.745095] imon 2-1.7:1.1: iMON device (15c2:0038, intf1) on usb<2:4> initialized [ 2.745109] usbcore: registered new interface driver imon [ 2.750103] cfg80211: Calling CRDA to update world regulatory domain [ 2.824982] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd [ 2.921121] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 2.921433] zd1211rw 1-1.4:1.0: phy0 [ 2.921449] usbcore: registered new interface driver zd1211rw [ 3.192496] fbcon: inteldrmfb (fb0) is primary device [ 3.478839] Console: switching to colour frame buffer device 160x45 [ 3.481939] fb0: inteldrmfb frame buffer device [ 3.481940] drm: registered panic notifier [ 3.482872] fixme: max PWM is zero. [ 3.482961] acpi device:33: registered as cooling_device4 [ 3.483135] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 3.483264] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.483309] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.483372] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.483564] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.483613] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X [ 3.483639] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 3.709576] scsi 6:0:0:0: Direct-Access Myson CS8819A2-109 0 1.01 PQ: 0 ANSI: 0 CCS [ 3.710174] scsi 6:0:0:1: Direct-Access Myson CS8819A2-109 1 1.01 PQ: 0 ANSI: 0 CCS [ 3.710780] scsi 6:0:0:2: Direct-Access Myson CS8819A2-109 2 1.01 PQ: 0 ANSI: 0 CCS [ 3.711436] scsi 6:0:0:3: Direct-Access Myson CS8819A2-109 3 1.01 PQ: 0 ANSI: 0 CCS [ 3.725135] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 3.726997] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 3.727601] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 3.730725] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 4.045380] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1 [ 4.045403] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 4.045527] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1 [ 4.045692] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1 [ 4.051976] HDMI: detected monitor at connection type HDMI [ 4.051978] HDMI: available speakers: FL/FR [ 4.051980] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 [ 4.052061] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1 [ 4.052143] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1 [ 4.053443] HDMI: detected monitor at connection type HDMI [ 4.053445] HDMI: available speakers: FL/FR [ 4.053447] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 [ 4.053669] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.053803] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.054408] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.056911] HDMI: detected monitor at connection type HDMI [ 4.056914] HDMI: available speakers: FL/FR [ 4.056916] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 [ 7.560034] Adding 3906556k swap on /dev/sda3. Priority:-1 extents:1 across:3906556k SS [ 7.562968] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.614227] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.626213] loop: module loaded [ 8.838791] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 8.875045] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 9.017229] zd1211rw 1-1.4:1.0: firmware version 4725 [ 9.057211] zd1211rw 1-1.4:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS [ 9.075843] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.663648] Linux media interface: v0.10 [ 9.665537] Linux video capture interface: v2.00 [ 9.669803] saa7146: register extension 'av7110' [ 9.866983] r8169 0000:06:00.0: eth0: link down [ 9.867242] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.347896] wlan0: authenticate with 00:1b:fc:d4:62:f6 (try 1) [ 10.350266] wlan0: authenticated [ 10.369994] wlan0: associate with 00:1b:fc:d4:62:f6 (try 1) [ 10.372878] wlan0: RX AssocResp from 00:1b:fc:d4:62:f6 (capab=0x411 status=0 aid=1) [ 10.372880] wlan0: associated [ 10.373622] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.409286] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 20.931045] wlan0: no IPv6 routers present ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 2103 board_vendor: ASUSTeK COMPUTER INC. board_name: P8H67-M EVO board_version: Rev 1.xx ** Loaded modules: aesni_intel cryptd aes_x86_64 aes_generic dvb_ttpci dvb_core saa7146_vv videodev media v4l2_compat_ioctl32 saa7146 videobuf_dma_sg videobuf_core ttpci_eeprom loop firewire_sbp2 snd_hda_codec_hdmi snd_hda_codec_realtek arc4 zd1211rw mac80211 cfg80211 ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sony_decoder rc_imon_pad ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder eeepc_wmi usb_storage imon uas rc_core snd_hda_intel asus_wmi snd_hda_codec sparse_keymap rfkill snd_hwdep snd_pcm snd_seq pci_hotplug snd_timer snd_seq_device psmouse evdev i2c_i801 pcspkr serio_raw i915 iTCO_wdt snd iTCO_vendor_support drm_kms_helper drm soundcore snd_page_alloc i2c_algo_bit i2c_core wmi video processor button thermal_sys ext4 mbcache jbd2 crc16 usbhid hid sr_mod sd_mod cdrom crc_t10dif xhci_hcd ahci libahci libata scsi_mod firewire_ohci firewire_core crc_itu_t r8169 mii ehci_hcd usbcore usb_common ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet dhcp wireless-essid PolishFrench wpa-driver wext wpa-conf /etc/wpa_supplicant.conf ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 14:da:e9:db:f2:ce brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:02:72:5d:f6:d5 brd ff:ff:ff:ff:ff:ff inet 192.168.1.120/24 brd 192.168.1.255 scope global wlan0 inet6 fe80::202:72ff:fe5d:f6d5/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 85268 323 0 0 0 0 0 0 85268 323 0 0 0 0 0 0 wlan0: 194308 652 0 0 0 0 0 0 98029 456 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 970 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 968 incoming packets delivered 763 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 9 active connections openings 4 passive connection openings 2 failed connection attempts 0 connection resets received 6 connections established 952 segments received 748 segments send out 0 segments retransmited 0 bad segments received. 3 resets sent Udp: 15 packets received 0 packets to unknown port received. 0 packet receive errors 15 packets sent UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 9 delayed acks sent 4 packets directly queued to recvmsg prequeue. 237 packet headers predicted 67 acknowledgments not containing data payload received 386 predicted acknowledgments IpExt: InBcastPkts: 2 OutBcastPkts: 1 InOctets: 270240 OutOctets: 166977 InBcastOctets: 381 OutBcastOctets: 152 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0112] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 53 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe708000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe707000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:8436] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 54 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe600000-fe6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe500000-fe5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: bfa00000-bfafffff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe706000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 47 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at fe705000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe704000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus 03:00.0 Multimedia controller [0480]: Device [dd01:0003] Subsystem: Device [dd01:0030] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 4 Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8384] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=2K] Region 2: I/O ports at e000 [size=256] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8488] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: I/O ports at d000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Expansion ROM at d0020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 07:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM108x PCIe to PCI Bridge Controller [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=07, secondary=08, subordinate=08, sec-latency=32 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 001 Device 004: ID 0ace:1215 ZyDAS ZD1211B 802.11g Bus 002 Device 003: ID 04cf:8819 Myson Century, Inc. USB 2.0 SD/MMC Reader Bus 002 Device 004: ID 15c2:0038 SoundGraph Inc. GD01 MX LCD Display/IR Receiver -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.100 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.2.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.2.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek 0.35 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64: linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: trueAttachment: alsa-info.318.txt.gz
Description: GNU Zip compressed dataAttachment: alsa-info.326.txt.gz
Description: GNU Zip compressed data
--- End Message ---
--- Begin Message ---
- To: 661335-done@bugs.debian.org
- Cc: 661335-submitter@bugs.debian.org
- Subject: Closing this bug (BTS maintenance for src:linux bugs)
- From: carnil@debian.org
- Date: Sat, 01 May 2021 05:42:56 -0700 (PDT)
- Message-id: <608d4cd0.1c69fb81.bb5c9.bbaa@mx.google.com>
Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---