--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: Repeated "BUG: soft lockup" followed by system freeze
- From: Benjamin Moody <benjamin.moody@gmail.com>
- Date: Fri, 24 Jul 2015 14:34:41 -0400
- Message-id: <20150724183441.17834.51085.reportbug@physionet2.ecg.mit.edu>
Package: src:linux
Version: 3.2.68-1+deb7u2
Severity: important
Dear Maintainer,
The kernel reported a series of messages of the form "BUG: soft lockup":
$ grep BUG /var/log/syslog.1
Jul 23 01:33:00 physionet2 kernel: [555508.348031] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:33:28 physionet2 kernel: [555536.348024] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:34:08 physionet2 kernel: [555576.348025] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:34:36 physionet2 kernel: [555604.348024] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:35:04 physionet2 kernel: [555632.348024] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:35:32 physionet2 kernel: [555660.348025] BUG: soft lockup - CPU#3 stuck for 23s! [apache2:7555]
...
Jul 23 03:10:12 physionet2 kernel: [561340.348023] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 03:10:12 physionet2 kernel: [561340.532039] BUG: soft lockup - CPU#5 stuck for 23s! [ATM:30084]
Jul 23 03:10:13 physionet2 kernel: [561340.992064] BUG: soft lockup - CPU#10 stuck for 22s! [challenge-d:6735]
Jul 23 03:10:13 physionet2 kernel: [561341.084076] BUG: soft lockup - CPU#11 stuck for 22s! [apcupsd:2873]
Jul 23 03:10:13 physionet2 kernel: [561341.268087] BUG: soft lockup - CPU#13 stuck for 22s! [ATM:20277]
Jul 23 03:10:40 physionet2 kernel: [561368.072017] BUG: soft lockup - CPU#0 stuck for 22s! [kswapd0:93]
$ grep BUG /var/log/syslog.1 | wc -l
298
(Full contents of one of these messages shown below.)
As you can see, this happened many times over a period of an hour and
a half. During this time, the system was still working on some level
(the apache log shows a steady stream of requests), but I have no idea
if anything unusual was going on. At 03:01:06, the apache log stops.
At 03:10:40, the system log abruptly cuts off in the middle of an
error message.
When I came to look at the machine the next day, it was *mostly*
frozen - neither apache, nor ssh, nor any other network services were
responding; however, it still responded to pings, and nmap still
reported various ports as open. The console was blank and did not
respond to CapsLock, NumLock, nor Ctrl+Alt+Delete.
I have no idea how to debug this. Obviously a web search turns up
huge numbers of results for "BUG: soft lockup" (including other Debian
bugs), but I have no idea if any of them are relevant to my case, nor
have I found any information about how to narrow down the problem.
Please tell me if there is anything I can do to make it possible to
figure out what is going on if this happens in the future.
The first error message:
-----
Jul 23 01:33:00 physionet2 kernel: [555508.348031] BUG: soft lockup - CPU#3 stuck for 22s! [apache2:7555]
Jul 23 01:33:00 physionet2 kernel: [555508.348145] Modules linked in: ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc xfs loop cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod radeon snd_pcm ttm drm_kms_helper drm snd_page_alloc power_supply snd_timer amd64_edac_mod nv_tco snd k10temp i2c_nforce2 i2c_algo_bit edac_mce_amd shpchp soundcore edac_core evdev i2c_core mperf pcspkr psmouse serio_raw processor thermal_sys button ext4 crc16 jbd2 mbcache sr_mod cdrom sg usbhid mptsas hid scsi_transport_sas mptscsih sd_mod crc_t10dif ata_generic e1000e pata_amd mptbase e1000 3w_9xxx ohci_hcd sata_nv libata ehci_hcd usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Jul 23 01:33:00 physionet2 kernel: [555508.348226] CPU 3
Jul 23 01:33:00 physionet2 kernel: [555508.348228] Modules linked in: ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc xfs loop cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod radeon snd_pcm ttm drm_kms_helper drm snd_page_alloc power_supply snd_timer amd64_edac_mod nv_tco snd k10temp i2c_nforce2 i2c_algo_bit edac_mce_amd shpchp soundcore edac_core evdev i2c_core mperf pcspkr psmouse serio_raw processor thermal_sys button ext4 crc16 jbd2 mbcache sr_mod cdrom sg usbhid mptsas hid scsi_transport_sas mptscsih sd_mod crc_t10dif ata_generic e1000e pata_amd mptbase e1000 3w_9xxx ohci_hcd sata_nv libata ehci_hcd usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Jul 23 01:33:00 physionet2 kernel: [555508.348274]
Jul 23 01:33:00 physionet2 kernel: [555508.348278] Pid: 7555, comm: apache2 Not tainted 3.2.0-4-amd64 #1 Debian 3.2.68-1+deb7u2 Supermicro H8QM3/H8QM3
Jul 23 01:33:00 physionet2 kernel: [555508.348284] RIP: 0010:[<ffffffff811b671a>] [<ffffffff811b671a>] __bitmap_empty+0xa/0x52
Jul 23 01:33:00 physionet2 kernel: [555508.348296] RSP: 0018:ffff880432583d88 EFLAGS: 00000212
Jul 23 01:33:00 physionet2 kernel: [555508.348299] RAX: 0000000000000008 RBX: ffffffff810d026f RCX: 0000000000000040
Jul 23 01:33:00 physionet2 kernel: [555508.348302] RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffff81763718
Jul 23 01:33:00 physionet2 kernel: [555508.348305] RBP: ffffffff81763718 R08: 0000000000000200 R09: ffffffff81763758
Jul 23 01:33:00 physionet2 kernel: [555508.348308] R10: ffff88013230e818 R11: ffff88013230e818 R12: ffffffff810f383a
Jul 23 01:33:00 physionet2 kernel: [555508.348310] R13: ffffea0000f48eb0 R14: ffffffff810f7e81 R15: ffffea0000f48eb0
Jul 23 01:33:00 physionet2 kernel: [555508.348314] FS: 00007f98db89b700(0000) GS:ffff880137d80000(0000) knlGS:0000000000000000
Jul 23 01:33:00 physionet2 kernel: [555508.348317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 23 01:33:00 physionet2 kernel: [555508.348319] CR2: 00007f98c969d004 CR3: 000000013b851000 CR4: 00000000000006e0
Jul 23 01:33:00 physionet2 kernel: [555508.348322] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 23 01:33:00 physionet2 kernel: [555508.348325] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul 23 01:33:00 physionet2 kernel: [555508.348328] Process apache2 (pid: 7555, threadinfo ffff880432582000, task ffff8802327257c0)
Jul 23 01:33:00 physionet2 kernel: [555508.348330] Stack:
Jul 23 01:33:00 physionet2 kernel: [555508.348366] ffffffff81031921 0000000000000001 ffff880232142840 ffff880232142b00
Jul 23 01:33:00 physionet2 kernel: [555508.348375] ffff880232142840 ffff880132758088 00007f98c969e000 00007f98c969a000
Jul 23 01:33:00 physionet2 kernel: [555508.348380] ffffffff81031751 ffffffff81031a05 00007f98c969a000 ffff880432583e50
Jul 23 01:33:00 physionet2 kernel: [555508.348385] Call Trace:
Jul 23 01:33:00 physionet2 kernel: [555508.348435] [<ffffffff81031921>] ? native_flush_tlb_others+0xaf/0xe5
Jul 23 01:33:00 physionet2 kernel: [555508.348440] [<ffffffff81031751>] ? flush_tlb_others+0x5/0x8
Jul 23 01:33:00 physionet2 kernel: [555508.348443] [<ffffffff81031a05>] ? flush_tlb_mm+0x64/0x68
Jul 23 01:33:00 physionet2 kernel: [555508.348450] [<ffffffff810cfaa4>] ? tlb_flush_mmu+0x1c/0x50
Jul 23 01:33:00 physionet2 kernel: [555508.348453] [<ffffffff810cfae4>] ? tlb_finish_mmu+0xc/0x31
Jul 23 01:33:00 physionet2 kernel: [555508.348459] [<ffffffff810d514c>] ? unmap_region+0xdf/0xf1
Jul 23 01:33:00 physionet2 kernel: [555508.348463] [<ffffffff810d61d3>] ? do_munmap+0x292/0x2f3
Jul 23 01:33:00 physionet2 kernel: [555508.348468] [<ffffffff810d6362>] ? sys_munmap+0x3c/0x52
Jul 23 01:33:00 physionet2 kernel: [555508.348474] [<ffffffff813561b2>] ? system_call_fastpath+0x16/0x1b
Jul 23 01:33:00 physionet2 kernel: [555508.348476] Code: 8d 44 24 20 4c 89 4c 24 48 c7 44 24 08 10 00 00 00 48 89 44 24 18 e8 5a ff ff ff 48 83 c4 58 c3 90 89 f0 b9 40 00 00 00 99 f7 f9 <31> d2 eb 0b 48 ff c2 48 83 7c d7 f8 00 75 36 39 c2 7c f1 40 f6
Jul 23 01:33:00 physionet2 kernel: [555508.349059] Call Trace:
Jul 23 01:33:00 physionet2 kernel: [555508.349062] [<ffffffff81031921>] ? native_flush_tlb_others+0xaf/0xe5
Jul 23 01:33:00 physionet2 kernel: [555508.349067] [<ffffffff81031751>] ? flush_tlb_others+0x5/0x8
Jul 23 01:33:00 physionet2 kernel: [555508.349080] [<ffffffff81031a05>] ? flush_tlb_mm+0x64/0x68
Jul 23 01:33:00 physionet2 kernel: [555508.349090] [<ffffffff810cfaa4>] ? tlb_flush_mmu+0x1c/0x50
Jul 23 01:33:00 physionet2 kernel: [555508.349102] [<ffffffff810cfae4>] ? tlb_finish_mmu+0xc/0x31
Jul 23 01:33:00 physionet2 kernel: [555508.349111] [<ffffffff810d514c>] ? unmap_region+0xdf/0xf1
Jul 23 01:33:00 physionet2 kernel: [555508.349115] [<ffffffff810d61d3>] ? do_munmap+0x292/0x2f3
Jul 23 01:33:00 physionet2 kernel: [555508.349119] [<ffffffff810d6362>] ? sys_munmap+0x3c/0x52
Jul 23 01:33:00 physionet2 kernel: [555508.349123] [<ffffffff813561b2>] ? system_call_fastpath+0x16/0x1b
-----
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4c19608f-b525-4050-9660-fb6bce0aa5af ro quiet
** Not tainted
** Kernel log:
[ 19.633473] EDAC amd64: CS7: Registered DDR2 RAM
[ 19.633694] EDAC MC3: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:1b.2
[ 19.633827] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 19.686965] i2c i2c-0: nForce2 SMBus adapter at 0xc800
[ 19.686998] i2c i2c-1: nForce2 SMBus adapter at 0xc480
[ 19.687104] i2c i2c-2: nForce2 SMBus adapter at 0x2d00
[ 19.687139] i2c i2c-3: nForce2 SMBus adapter at 0x2e00
[ 19.717738] [drm] Initialized drm 1.1.0 20060810
[ 19.720477] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 19.720602] NV_TCO: Watchdog reboot detected.
[ 19.720681] NV_TCO: initialized (0x3440). heartbeat=30 sec (nowayout=0)
[ 19.918893] Error: Driver 'pcspkr' is already registered, aborting...
[ 20.009809] [drm] radeon defaulting to kernel modesetting.
[ 20.009813] [drm] radeon kernel modesetting enabled.
[ 20.010370] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0xA211).
[ 20.010425] [drm] register mmio base: 0xDF9F0000
[ 20.010427] [drm] register mmio size: 65536
[ 20.014981] radeon 0000:01:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
[ 20.014985] radeon 0000:01:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 20.025031] [drm] Detected VRAM RAM=128M, BAR=128M
[ 20.025037] [drm] RAM width 16bits DDR
[ 20.025211] [TTM] Zone kernel: Available graphics memory: 8235458 kiB
[ 20.025213] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 20.025216] [TTM] Initializing pool allocator
[ 20.025225] [TTM] Initializing DMA pool allocator
[ 20.025281] [drm] radeon: 16M of VRAM memory ready
[ 20.025285] [drm] radeon: 512M of GTT memory ready.
[ 20.025318] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 20.026718] [drm] radeon: ib pool ready.
[ 20.047576] [drm] PCIE GART of 512M enabled (table at 0x0000000037500000).
[ 20.047622] radeon 0000:01:01.0: WB disabled
[ 20.047627] [drm] fence driver on ring 0 use gpu addr 0xb0000000 and cpu addr 0xffff88003740f000
[ 20.047633] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.047635] [drm] Driver supports precise vblank timestamp query.
[ 20.047656] [drm] radeon: irq initialized.
[ 20.047749] [drm] Loading R100 Microcode
[ 20.204077] platform radeon_cp.0: firmware: agent aborted loading radeon/R100_cp.bin (not found?)
[ 20.204258] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 20.204308] radeon 0000:01:01.0: failed initializing CP (-2).
[ 20.204357] radeon 0000:01:01.0: Disabling GPU acceleration
[ 20.204446] [drm] radeon: cp finalized
[ 20.204487] radeon 0000:01:01.0: ffff88012c38dc00 unpin not necessary
[ 20.205512] [drm] No TV DAC info found in BIOS
[ 20.205558] [drm] Radeon Display Connectors
[ 20.205560] [drm] Connector 0:
[ 20.205562] [drm] VGA
[ 20.205565] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 20.205567] [drm] Encoders:
[ 20.205569] [drm] CRT1: INTERNAL_DAC1
[ 20.205571] [drm] Connector 1:
[ 20.205572] [drm] DVI-I
[ 20.205574] [drm] HPD2
[ 20.205576] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 20.205578] [drm] Encoders:
[ 20.205580] [drm] CRT2: INTERNAL_DAC2
[ 20.205582] [drm] DFP2: INTERNAL_DVO1
[ 20.270125] [drm] fb mappable at 0xD0040000
[ 20.270127] [drm] vram apper at 0xD0000000
[ 20.270130] [drm] size 786432
[ 20.270131] [drm] fb depth is 8
[ 20.270133] [drm] pitch is 1024
[ 20.270236] fbcon: radeondrmfb (fb0) is primary device
[ 20.430908] Console: switching to colour frame buffer device 128x48
[ 20.438454] fb0: radeondrmfb frame buffer device
[ 20.438456] drm: registered panic notifier
[ 20.438465] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:01.0 on minor 0
[ 20.578018] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 21.823325] Adding 16777212k swap on /dev/sdc3. Priority:-1 extents:1 across:16777212k
[ 21.843679] EXT4-fs (sdc4): re-mounted. Opts: (null)
[ 22.191781] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro
[ 22.464405] device-mapper: uevent: version 1.0.3
[ 22.464556] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 25.756625] loop: module loaded
[ 26.572415] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 67.410145] EXT4-fs (sda1): recovery complete
[ 67.430191] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 67.483344] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 67.484445] SGI XFS Quota Management subsystem
[ 67.485630] XFS (dm-0): Mounting Filesystem
[ 67.694463] XFS (dm-0): Starting recovery (logdev: internal)
[ 68.772853] XFS (dm-0): Ending recovery (logdev: internal)
[ 69.887764] RPC: Registered named UNIX socket transport module.
[ 69.887770] RPC: Registered udp transport module.
[ 69.887773] RPC: Registered tcp transport module.
[ 69.887775] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 69.926833] FS-Cache: Loaded
[ 69.971409] FS-Cache: Netfs 'nfs' registered for caching
[ 69.972396] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 69.973352] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 69.977121] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 69.988715] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 71.204622] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 71.383345] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 71.493258] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 80.456020] eth1: no IPv6 routers present
[ 706.300446] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 706.301957] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 706.305711] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 717.032010] eth2: no IPv6 routers present
[49588.629433] sched: RT throttling activated
** Model information
sys_vendor: Supermicro
product_name: H8QM3
product_version: 1234567890
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080014
board_vendor: Supermicro
board_name: H8QM3
board_version: 1234567890
** Loaded modules:
ip6t_REJECT
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
ipt_REJECT
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xfs
loop
cryptd
aes_x86_64
aes_generic
xts
gf128mul
dm_crypt
dm_mod
radeon
ttm
snd_pcm
snd_page_alloc
drm_kms_helper
nv_tco
drm
i2c_nforce2
psmouse
serio_raw
power_supply
snd_timer
i2c_algo_bit
amd64_edac_mod
snd
soundcore
pcspkr
mperf
k10temp
i2c_core
edac_mce_amd
evdev
edac_core
shpchp
processor
thermal_sys
button
ext4
crc16
jbd2
mbcache
sr_mod
cdrom
sg
mptsas
usbhid
scsi_transport_sas
hid
sd_mod
mptscsih
crc_t10dif
e1000e
pata_amd
e1000
ata_generic
3w_9xxx
mptbase
ohci_hcd
sata_nv
ehci_hcd
libata
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1c00 [size=128]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 7c00 [size=64]
Region 4: I/O ports at 2d00 [size=64]
Region 5: I/O ports at 2e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df8bf000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at df8bec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 IDE interface [0101]: NVIDIA Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 0400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:05.0 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 7480 [size=8]
Region 1: I/O ports at 7400 [size=4]
Region 2: I/O ports at 7080 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6c00 [size=16]
Region 5: Memory at df8bd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:05.1 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 6880 [size=8]
Region 1: I/O ports at 6800 [size=4]
Region 2: I/O ports at 6480 [size=8]
Region 3: I/O ports at 6400 [size=4]
Region 4: I/O ports at 6080 [size=16]
Region 5: Memory at df8bc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:05.2 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 23
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 5c00 [size=4]
Region 2: I/O ports at 5880 [size=8]
Region 3: I/O ports at 5800 [size=4]
Region 4: I/O ports at 5480 [size=16]
Region 5: Memory at df8bb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:06.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00008000-00008fff
Memory behind bridge: df900000-df9fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dfa00000-dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0375] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dff00000-dfffffff
Prefetchable memory behind bridge: 00000000dc000000-00000000ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:1a.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1b.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:1b.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1b.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 8000 [size=256]
Region 2: Memory at df9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at df9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:a211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at dfde0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at dfa00000 [disabled] [size=2M]
Capabilities: <access denied>
Kernel driver in use: mptsas
05:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 07) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=07, subordinate=07, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:03.0 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:117a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfee0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at ac00 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
06:03.1 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:117a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at dfea0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at a880 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
09:00.0 RAID bus controller [0104]: 3ware Inc 9650SE SATA-II RAID PCIe [13c1:1004] (rev 01)
Subsystem: 3ware Inc 9650SE SATA-II RAID PCIe [13c1:1004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dc000000 (64-bit, prefetchable) [size=32M]
Region 2: Memory at dffff000 (64-bit, non-prefetchable) [size=4K]
Region 4: I/O ports at b800 [size=256]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3w-9xxx
80:00.0 RAM memory [0500]: NVIDIA Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
80:01.0 RAM memory [0500]: NVIDIA Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at c000 [size=128]
Region 1: Memory at cfdff000 (32-bit, non-prefetchable) [size=4K]
80:01.1 SMBus [0c05]: NVIDIA Corporation MCP55 SMBus [10de:0368] (rev a3)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c880 [size=64]
Region 4: I/O ports at c800 [size=64]
Region 5: I/O ports at c480 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
80:0a.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
80:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
80:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=83, subordinate=83, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
80:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=84, subordinate=84, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
80:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0375] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=85, subordinate=85, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
80:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=86, subordinate=86, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
81:00.0 RAID bus controller [0104]: 3ware Inc 9650SE SATA-II RAID PCIe [13c1:1004] (rev 01)
Subsystem: 3ware Inc 9650SE SATA-II RAID PCIe [13c1:1004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at cc000000 (64-bit, prefetchable) [size=32M]
Region 2: Memory at cfeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: I/O ports at d800 [size=256]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3w-9xxx
85:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Fiber) [8086:107e] (rev 06)
Subsystem: Intel Corporation PRO/1000 PF Server Adapter [8086:1084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 76
Region 0: Memory at cffe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at cffc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=32]
Expansion ROM at cffa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
-- System Information:
Debian Release: 7.8
APT prefers oldstable-updates
APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---