--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16.0-4-586: Oops with 586 and pae kernel
- From: Cesare Leonardi <ced@bernispa.com>
- Date: Thu, 19 Feb 2015 08:26:55 +0100
- Message-id: <20150219072655.GA2723@barone.internal.bernispa.com>
Package: src:linux
Version: 3.16.7-ckt4-3
Severity: normal
Due to hardware migration, i'm running a 32 bit system on 64 bit capable
hardware (Asrock E350M1/USB3):
# dpkg --print-architecture
i386
Normally i use an amd64 kernel but due to the following problem, i
currently need a kernel that match my architecture (32 bit kernel with a
32 bit userland):
https://wiki.strongswan.org/issues/352
But on that hardware i've find out that both 586 and 686-pae kernel
flavours oopses on boot causing the following problems:
- KMS doesn't work and console stays in text mode.
- systemd-udevd process is left in D state, preventing the system to
poweroff or reboot. You have to do a reset.
While amd64 has no sush problem.
I've tested that this happens also with linux-image-3.19.0-trunk-586
(3.19-1~exp1).
Looks like the problem is known upstream and, from what i've understood,
is fixed. But it's not clear to me what is the first fixed version:
https://bugzilla.kernel.org/show_bug.cgi?id=79501
https://bugzilla.kernel.org/show_bug.cgi?id=87971
Attached the dmesg captured with the 3 kernel flavours.
Cesare.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P1.80
board_vendor: ASRock
board_name: E350M1
board_version:
** Network interface configuration:
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-586 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-586 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16.0-4-586 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-21
ii linux-doc-3.16 3.16.7-ckt4-3
Versions of packages linux-image-3.16.0-4-586 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.43
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-586/postinst/depmod-error-initrd-3.16.0-4-586: false
linux-image-3.16.0-4-586/postinst/mips-initrd-3.16.0-4-586:
linux-image-3.16.0-4-586/prerm/removing-running-kernel-3.16.0-4-586: true
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-586 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aea02fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aea03000-0x00000000aea55fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea56000-0x00000000af47efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af47f000-0x00000000af87bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af87c000-0x00000000af87cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af87d000-0x00000000af883fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af884000-0x00000000afc97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc98000-0x00000000afef2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0AFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [c00fd6e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x35bfffff]
[ 0.000000] [mem 0x30000000-0x35bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01717000, 0x01717fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x361e2000-0x370e8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0xAF470078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0xAF4759B8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0xAF470178 00583F (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0xAF47DF80 000040
[ 0.000000] ACPI: APIC 0xAF475AB0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0xAF475B18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0xAF475B60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 0xAF475BA0 000042 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0xAF475BE8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0xAF475C20 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0xAF476000 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: BGRT 0xAF477690 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1927MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01718000, 0x01718fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xafefffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xaea02fff]
[ 0.000000] node 0: [mem 0xaf87c000-0xaf87cfff]
[ 0.000000] node 0: [mem 0xaf884000-0xafc97fff]
[ 0.000000] node 0: [mem 0xafef3000-0xafefffff]
[ 0.000000] On node 0 totalpages: 716226
[ 0.000000] free_area_init_node: node 0, pgdat c15ef3e0, node_mem_map f4be2020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3855 pages used for memmap
[ 0.000000] HighMem zone: 488999 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714450
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=5b88a8c5-acfe-4461-9a70-088d1aaf3c3c ro quiet systemd.show_status=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000aff00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2818780K/2864904K available (4243K kernel code, 502K rwdata, 1388K rodata, 668K init, 412K bss, 46124K reserved, 1955996K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1601000 - 0xc16a8000 ( 668 kB)
.data : 0xc1425350 - 0xc15ff840 (1897 kB)
.text : 0xc1000000 - 0xc1425350 (4244 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1600.023 MHz processor
[ 0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.04 BogoMIPS (lpj=6400092)
[ 0.000052] pid_max: default: 32768 minimum: 301
[ 0.000068] ACPI: Core revision 20140424
[ 0.010118] ACPI: All ACPI Tables successfully acquired
[ 0.010677] Security Framework initialized
[ 0.010695] AppArmor: AppArmor disabled by boot time parameter
[ 0.010698] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010724] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010729] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011078] Initializing cgroup subsys memory
[ 0.011088] Initializing cgroup subsys devices
[ 0.011101] Initializing cgroup subsys freezer
[ 0.011108] Initializing cgroup subsys net_cls
[ 0.011119] Initializing cgroup subsys blkio
[ 0.011127] Initializing cgroup subsys perf_event
[ 0.011132] Initializing cgroup subsys net_prio
[ 0.011180] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.011185] CPU: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.014719] ftrace: allocating 19653 entries in 39 pages
[ 0.031621] Performance Events: AMD PMU driver.
[ 0.031637] ... version: 0
[ 0.031641] ... bit width: 48
[ 0.031643] ... generic registers: 4
[ 0.031646] ... value mask: 0000ffffffffffff
[ 0.031649] ... max period: 00007fffffffffff
[ 0.031651] ... fixed-purpose events: 0
[ 0.031654] ... event mask: 000000000000000f
[ 0.034189] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.178611] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.178784] devtmpfs: initialized
[ 0.179085] PM: Registering ACPI NVS region [mem 0xaea56000-0xaf47efff] (10653696 bytes)
[ 0.179429] PM: Registering ACPI NVS region [mem 0xaf87d000-0xaf883fff] (28672 bytes)
[ 0.181505] pinctrl core: initialized pinctrl subsystem
[ 0.181654] NET: Registered protocol family 16
[ 0.181865] EISA bus registered
[ 0.181871] cpuidle: using governor ladder
[ 0.181876] cpuidle: using governor menu
[ 0.182099] ACPI: bus type PCI registered
[ 0.182105] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.182238] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.182244] PCI: not using MMCONFIG
[ 0.195141] PCI: Using configuration type 1 for base access
[ 0.195144] PCI: Using configuration type 1 for extended access
[ 0.196581] ACPI: Added _OSI(Module Device)
[ 0.196585] ACPI: Added _OSI(Processor Device)
[ 0.196588] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196591] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.199458] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.202865] ACPI: Interpreter enabled
[ 0.202884] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.202893] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.202921] ACPI: (supports S0 S3 S4 S5)
[ 0.202925] ACPI: Using IOAPIC for interrupt routing
[ 0.202970] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.203054] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.203057] PCI: Using MMCONFIG for extended config space
[ 0.203084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.210175] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.212422] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.212434] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.212445] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.213183] PCI host bridge to bus 0000:00
[ 0.213190] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.213195] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.213199] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.213203] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.213207] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.213212] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.213216] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.213220] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.213236] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.213406] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.213424] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.213435] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.213445] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.213508] pci 0000:00:01.0: supports D1 D2
[ 0.213642] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.213658] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.213730] pci 0000:00:01.1: supports D1 D2
[ 0.213864] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.213942] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.214016] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.214120] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.214145] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.214158] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.214171] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.214184] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.214197] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.214211] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f3ff]
[ 0.214393] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.214412] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.214536] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.214636] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.214662] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.214759] pci 0000:00:12.2: supports D1 D2
[ 0.214763] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.214832] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.214921] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.214939] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.215063] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.215149] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.215174] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.215272] pci 0000:00:13.2: supports D1 D2
[ 0.215275] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.215344] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.215426] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.215625] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.215653] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.215733] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.215798] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.215876] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.216071] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.216171] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.216248] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.216267] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.216390] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.216478] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.216576] pci 0000:00:15.0: supports D1 D2
[ 0.216648] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.216732] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.216829] pci 0000:00:15.1: supports D1 D2
[ 0.216901] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.216991] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.217009] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.217133] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.217218] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.217242] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.217340] pci 0000:00:16.2: supports D1 D2
[ 0.217344] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.217414] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.217501] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.217652] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.217799] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.217947] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.218111] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.218255] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.218401] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.218547] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.218789] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.218906] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.218918] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.218923] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.218927] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.218931] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.218935] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.218939] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.218943] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.219036] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.219160] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.219187] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.219224] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.219249] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.219360] pci 0000:04:00.0: supports D1 D2
[ 0.219364] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226799] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.226824] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.226844] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.226885] pci_bus 0000:00: on NUMA node 0
[ 0.227795] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15)
[ 0.227919] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15)
[ 0.228044] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15)
[ 0.228167] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15)
[ 0.228269] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[ 0.228354] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[ 0.228438] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[ 0.228522] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[ 0.228735] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.228905] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.228910] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228920] vgaarb: loaded
[ 0.228923] vgaarb: bridge control possible 0000:00:01.0
[ 0.229026] PCI: Using ACPI for IRQ routing
[ 0.238684] PCI: pci_cache_line_size set to 64 bytes
[ 0.238768] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.238772] e820: reserve RAM buffer [mem 0xaea03000-0xafffffff]
[ 0.238776] e820: reserve RAM buffer [mem 0xaf87d000-0xafffffff]
[ 0.238779] e820: reserve RAM buffer [mem 0xafc98000-0xafffffff]
[ 0.238782] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.239048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.239055] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.241082] Switched to clocksource hpet
[ 0.248972] pnp: PnP ACPI init
[ 0.249009] ACPI: bus type PNP registered
[ 0.249290] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.249299] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.249829] system 00:01: [io 0x040b] has been reserved
[ 0.249835] system 00:01: [io 0x04d6] has been reserved
[ 0.249839] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.249844] system 00:01: [io 0x0c14] has been reserved
[ 0.249848] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.249853] system 00:01: [io 0x0c52] has been reserved
[ 0.249857] system 00:01: [io 0x0c6c] has been reserved
[ 0.249861] system 00:01: [io 0x0c6f] has been reserved
[ 0.249865] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.249869] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.249874] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.249878] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.249882] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.249887] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.249891] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.249896] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.249900] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.249904] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.249910] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249915] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249919] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.249924] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.249929] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.249934] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.249938] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.249944] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250123] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.250128] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250334] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.250448] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.250454] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250537] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250910] pnp 00:06: [dma 0 disabled]
[ 0.251020] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.251254] system 00:07: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.251260] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251451] pnp: PnP ACPI: found 8 devices
[ 0.251454] ACPI: bus type PNP unregistered
[ 0.251464] PnPBIOS: Disabled by ACPI PNP
[ 0.289136] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.289146] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.289151] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.289182] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.289187] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.289192] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.289203] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.289211] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.289218] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.289224] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.289229] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.289237] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.289243] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.289250] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.289265] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.289279] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.289284] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.289294] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.289303] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.289308] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.289312] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.289315] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.289319] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.289323] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.289327] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.289331] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.289335] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.289339] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.289344] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.289348] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.289351] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.289355] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.289359] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.289363] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.289367] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.289371] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.289375] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.289421] NET: Registered protocol family 2
[ 0.289775] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.289807] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.289833] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.289877] TCP: reno registered
[ 0.289881] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.289889] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.289960] NET: Registered protocol family 1
[ 0.289989] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.613646] PCI: CLS 64 bytes, default 64
[ 0.613750] Unpacking initramfs...
[ 1.182473] Freeing initrd memory: 15388K (f61e2000 - f70e9000)
[ 1.182736] microcode: CPU0: patch_level=0x05000028
[ 1.182826] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.182836] LVT offset 0 assigned for vector 0x400
[ 1.182850] perf: AMD IBS detected (0x000000ff)
[ 1.183323] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.183357] audit: initializing netlink subsys (disabled)
[ 1.183389] audit: type=2000 audit(1424326377.068:1): initialized
[ 1.183871] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.183895] zbud: loaded
[ 1.183984] VFS: Disk quotas dquot_6.5.2
[ 1.184002] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.184088] msgmni has been set to 1715
[ 1.184586] alg: No test for stdrng (krng)
[ 1.184624] bounce: pool size: 64 pages
[ 1.184646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.184714] io scheduler noop registered
[ 1.184720] io scheduler deadline registered
[ 1.184771] io scheduler cfq registered (default)
[ 1.185447] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.185483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.185624] GHES: HEST is not enabled!
[ 1.185655] isapnp: Scanning for PnP cards...
[ 1.539650] isapnp: No Plug & Play device found
[ 1.539748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.560237] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.560884] Linux agpgart interface v0.103
[ 1.561245] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.563952] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.563970] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.564254] mousedev: PS/2 mouse device common for all mice
[ 1.564352] rtc_cmos 00:03: RTC can wake from S4
[ 1.564505] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.564532] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.564616] platform eisa.0: Probing EISA bus 0
[ 1.564621] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.564626] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.564630] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.564633] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.564637] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.564641] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.564644] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.564648] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.564651] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.564655] platform eisa.0: EISA: Detected 0 cards
[ 1.564665] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.565043] TCP: cubic registered
[ 1.565068] NET: Registered protocol family 10
[ 1.565414] mip6: Mobile IPv6
[ 1.565421] NET: Registered protocol family 17
[ 1.565430] mpls_gso: MPLS GSO support
[ 1.565487] Using IPI Shortcut mode
[ 1.565691] registered taskstats version 1
[ 1.566239] rtc_cmos 00:03: setting system clock to 2015-02-19 06:12:57 UTC (1424326377)
[ 1.566381] PM: Hibernation image not present or could not be loaded.
[ 1.566818] Freeing unused kernel memory: 668K (c1601000 - c16a8000)
[ 1.566841] Write protecting the kernel text: 4248k
[ 1.566884] Write protecting the kernel read-only data: 1392k
[ 1.589326] systemd-udevd[50]: starting version 215
[ 1.590152] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.629485] SCSI subsystem initialized
[ 1.632832] ACPI: bus type USB registered
[ 1.632896] usbcore: registered new interface driver usbfs
[ 1.632921] usbcore: registered new interface driver hub
[ 1.637232] usbcore: registered new device driver usb
[ 1.638171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.638748] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.639056] ehci-pci: EHCI PCI platform driver
[ 1.639236] QUIRK: Enable AMD PLL fix
[ 1.639275] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.639288] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.639299] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.639314] ehci-pci 0000:00:12.2: debug port 1
[ 1.639370] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 1.647916] libata version 3.00 loaded.
[ 1.649265] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.649372] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.649377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.649382] usb usb1: Product: EHCI Host Controller
[ 1.649386] usb usb1: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[ 1.649390] usb usb1: SerialNumber: 0000:00:12.2
[ 1.649640] hub 1-0:1.0: USB hub found
[ 1.649654] hub 1-0:1.0: 5 ports detected
[ 1.650100] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.650115] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.650124] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.650140] ehci-pci 0000:00:13.2: debug port 1
[ 1.650189] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 1.656172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.656189] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.656475] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.656789] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xf8016000, 00:25:22:b4:d8:39, XID 0c200000 IRQ 40
[ 1.656795] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.661115] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.661206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.661211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.661215] usb usb2: Product: EHCI Host Controller
[ 1.661219] usb usb2: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[ 1.661223] usb usb2: SerialNumber: 0000:00:13.2
[ 1.661471] hub 2-0:1.0: USB hub found
[ 1.661486] hub 2-0:1.0: 5 ports detected
[ 1.661930] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.661943] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.661951] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.661966] ehci-pci 0000:00:16.2: debug port 1
[ 1.662016] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 1.673122] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.673225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.673231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.673235] usb usb3: Product: EHCI Host Controller
[ 1.673239] usb usb3: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[ 1.673243] usb usb3: SerialNumber: 0000:00:16.2
[ 1.673499] hub 3-0:1.0: USB hub found
[ 1.673513] hub 3-0:1.0: 4 ports detected
[ 1.674154] ohci-pci: OHCI PCI platform driver
[ 1.674342] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.674355] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.674402] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 1.733382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.733391] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.733395] usb usb4: Product: OHCI PCI host controller
[ 1.733399] usb usb4: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[ 1.733403] usb usb4: SerialNumber: 0000:00:12.0
[ 1.733883] hub 4-0:1.0: USB hub found
[ 1.733899] hub 4-0:1.0: 5 ports detected
[ 1.734170] ahci 0000:00:11.0: version 3.0
[ 1.734470] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.734478] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 1.736744] scsi0 : ahci
[ 1.736999] scsi1 : ahci
[ 1.737244] scsi2 : ahci
[ 1.737463] scsi3 : ahci
[ 1.737682] scsi4 : ahci
[ 1.737897] scsi5 : ahci
[ 1.738002] ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
[ 1.738008] ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
[ 1.738012] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
[ 1.738016] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
[ 1.738020] ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f300 irq 19
[ 1.738024] ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f380 irq 19
[ 1.738464] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.738479] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.738521] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 1.797383] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.797391] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.797396] usb usb5: Product: OHCI PCI host controller
[ 1.797400] usb usb5: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[ 1.797403] usb usb5: SerialNumber: 0000:00:13.0
[ 1.797881] hub 5-0:1.0: USB hub found
[ 1.797896] hub 5-0:1.0: 5 ports detected
[ 1.798330] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.798348] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.798384] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 1.857391] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.857399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.857404] usb usb6: Product: OHCI PCI host controller
[ 1.857408] usb usb6: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[ 1.857411] usb usb6: SerialNumber: 0000:00:14.5
[ 1.857888] hub 6-0:1.0: USB hub found
[ 1.857903] hub 6-0:1.0: 2 ports detected
[ 1.858261] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.858273] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.858311] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 1.917378] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.917387] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.917391] usb usb7: Product: OHCI PCI host controller
[ 1.917395] usb usb7: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[ 1.917399] usb usb7: SerialNumber: 0000:00:16.0
[ 1.917884] hub 7-0:1.0: USB hub found
[ 1.917900] hub 7-0:1.0: 4 ports detected
[ 2.057313] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.057397] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.057427] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.057456] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.073346] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 2.181293] tsc: Refined TSC clocksource calibration: 1600.000 MHz
[ 2.208091] usb 1-4: New USB device found, idVendor=04a9, idProduct=190a
[ 2.208106] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.208114] usb 1-4: Product: CanoScan
[ 2.208122] usb 1-4: Manufacturer: Canon
[ 2.229306] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.229358] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.230625] ata1.00: ATA-8: WDC WD2500AAKX-001CA0, 15.01H15, max UDMA/133
[ 2.230641] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.230687] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 2.230691] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.231893] ata1.00: configured for UDMA/133
[ 2.232114] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 1H15 PQ: 0 ANSI: 5
[ 2.232433] ata3.00: configured for UDMA/133
[ 2.232587] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 2.242277] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.242368] sd 0:0:0:0: [sda] Write Protect is off
[ 2.242374] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.242413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244045] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.244134] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.244140] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.244178] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.253175] sda: sda1 sda2 sda3
[ 2.253787] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.307844] sdb: sdb1
[ 2.308321] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.309308] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.309372] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.597149] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 2.602410] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[ 2.608699] microcode: CPU0: new patch_level=0x05000029
[ 2.689155] raid6: mmxx1 714 MB/s
[ 2.757088] raid6: mmxx2 1062 MB/s
[ 2.825111] raid6: sse1x1 696 MB/s
[ 2.893131] raid6: sse1x2 1044 MB/s
[ 2.961136] raid6: sse2x1 1131 MB/s
[ 3.029127] raid6: sse2x2 1505 MB/s
[ 3.029130] raid6: using algorithm sse2x2 (1505 MB/s)
[ 3.029133] raid6: using ssse3x1 recovery algorithm
[ 3.029933] xor: measuring software checksum speed
[ 3.069087] pIII_sse : 3236.000 MB/sec
[ 3.109086] prefetch64-sse: 3463.000 MB/sec
[ 3.109090] xor: using function: prefetch64-sse (3463.000 MB/sec)
[ 3.123765] Btrfs loaded
[ 3.181631] Switched to clocksource tsc
[ 3.203351] BTRFS: device label backup devid 1 transid 3286 /dev/sdb1
[ 3.206904] PM: Starting manual resume from disk
[ 3.206916] PM: Hibernation image partition 8:3 present
[ 3.206920] PM: Looking for hibernation image.
[ 3.207431] PM: Image not found (code -22)
[ 3.207439] PM: Hibernation image not present or could not be loaded.
[ 3.209340] usb 4-1: New USB device found, idVendor=045e, idProduct=0040
[ 3.209349] usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3.209354] usb 4-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 3.209358] usb 4-1: Manufacturer: Microsoft
[ 3.214453] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.220323] usbcore: registered new interface driver usbhid
[ 3.220330] usbhid: USB HID core driver
[ 3.221833] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:045E:0040.0001/input/input2
[ 3.222087] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-1/input0
[ 3.345153] usb 4-2: new low-speed USB device number 3 using ohci-pci
[ 3.393237] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.516565] usb 4-2: New USB device found, idVendor=045e, idProduct=0750
[ 3.516586] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.516591] usb 4-2: Product: Wired Keyboard 600
[ 3.516595] usb 4-2: Manufacturer: Microsoft
[ 3.525427] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:045E:0750.0002/input/input3
[ 3.525576] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input0
[ 3.534550] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:045E:0750.0003/input/input4
[ 3.534762] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input1
[ 4.127977] random: nonblocking pool is initialized
[ 6.978554] lp: driver loaded but no devices found
[ 7.135453] ppdev: user-space parallel port driver
[ 7.372126] fuse init (API version 7.23)
[ 7.451046] loop: module loaded
[ 7.519149] w83627ehf: Found NCT6775F chip at 0x290
[ 7.599815] systemd-udevd[185]: starting version 215
[ 9.024256] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.220204] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.236390] ACPI: acpi_idle registered with cpuidle
[ 9.237373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 9.237384] ACPI: Power Button [PWRB]
[ 9.237485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 9.237490] ACPI: Power Button [PWRF]
[ 9.238862] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.238994] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9.239151] BUG: unable to handle kernel paging request at 48b8ff05
[ 9.239278] IP: [<c1283bde>] acpi_ex_system_memory_space_handler+0x1b5/0x1ed
[ 9.239373] *pde = 00000000
[ 9.239455] Oops: 0002 [#1]
[ 9.239537] Modules linked in: button processor video(+) shpchp i2c_core thermal_sys w83627ehf hwmon_vid loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid crc32c_generic btrfs xor raid6_pq sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ohci_pci r8169 mii ahci libahci ehci_pci ohci_hcd ehci_hcd libata usbcore usb_common scsi_mod
[ 9.241178] CPU: 0 PID: 277 Comm: systemd-udevd Not tainted 3.16.0-4-586 #1 Debian 3.16.7-ckt4-3
[ 9.241240] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
[ 9.241301] task: f47829d0 ti: f73ae000 task.ti: f73ae000
[ 9.241350] EIP: 0060:[<c1283bde>] EFLAGS: 00010246 CPU: 0
[ 9.241400] EIP is at acpi_ex_system_memory_space_handler+0x1b5/0x1ed
[ 9.241450] EAX: 48b8ff05 EBX: 00000008 ECX: 000000fb EDX: 00000001
[ 9.241499] ESI: 00000000 EDI: f73af964 EBP: f73af888 ESP: f73af84c
[ 9.241549] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 9.241597] CR0: 8005003b CR2: 48b8ff05 CR3: 373a9000 CR4: 00000790
[ 9.241646] Stack:
[ 9.241689] f47829d0 f73af858 000080d0 00000246 00000014 000080d0 00000000 00000000
[ 9.242006] 00000001 000000fb 00000000 ffffff05 f441bef8 c1283a29 00000000 f73af8c8
[ 9.242323] c127da07 f73af964 00000000 f72f7ac0 f73af8b0 f73af900 00000000 00000001
[ 9.242639] Call Trace:
[ 9.242688] [<c1283a29>] ? acpi_ex_do_logical_op+0x160/0x160
[ 9.242742] [<c127da07>] ? acpi_ev_address_space_dispatch+0x1c7/0x219
[ 9.242794] [<c1280ba6>] ? acpi_ex_access_region+0x1e0/0x269
[ 9.242844] [<c1280ff6>] ? acpi_ex_field_datum_io+0x106/0x1ca
[ 9.242895] [<c120b7cf>] ? number.isra.3+0x38f/0x3a0
[ 9.242945] [<c12811a5>] ? acpi_ex_write_with_update_rule+0xeb/0xf3
[ 9.242996] [<c1280ed8>] ? acpi_ex_insert_into_field+0x2a9/0x2c1
[ 9.243047] [<c12809a3>] ? acpi_ex_write_data_to_field+0x1d7/0x1fa
[ 9.243100] [<c1291fa3>] ? acpi_ut_allocate_object_desc_dbg+0x3a/0x66
[ 9.243151] [<c12848e5>] ? acpi_ex_store_object_to_node+0x9f/0xb2
[ 9.243202] [<c12849b2>] ? acpi_ex_store+0xba/0x216
[ 9.243251] [<c128207d>] ? acpi_ex_opcode_1A_1T_1R+0x426/0x53a
[ 9.243302] [<c1284529>] ? acpi_ex_resolve_operands+0x1da/0x4c1
[ 9.243353] [<c127aaf9>] ? acpi_ds_exec_end_op+0xc4/0x3a5
[ 9.243404] [<c128b0ce>] ? acpi_ps_get_next_arg+0x300/0x35f
[ 9.243455] [<c126bc71>] ? acpi_os_release_object+0xd/0x11
[ 9.243505] [<c128c2be>] ? acpi_ps_append_arg+0x1e/0x7f
[ 9.243556] [<c128b5d2>] ? acpi_ps_parse_loop+0x4a5/0x4f2
[ 9.243606] [<c1292b26>] ? acpi_ut_create_generic_state+0x31/0x3b
[ 9.243658] [<c128bf49>] ? acpi_ps_parse_aml+0x8a/0x23c
[ 9.243710] [<c128c69a>] ? acpi_ps_execute_method+0x19e/0x23c
[ 9.243761] [<c12876ee>] ? acpi_ns_evaluate+0x1b8/0x243
[ 9.243812] [<c128a0de>] ? acpi_evaluate_object+0xc7/0x1fb
[ 9.243862] [<c128a127>] ? acpi_evaluate_object+0x110/0x1fb
[ 9.243913] [<c1291da9>] ? acpi_ut_release_mutex+0x69/0x78
[ 9.243964] [<c1290bf5>] ? acpi_ut_update_object_reference+0xec/0x159
[ 9.244015] [<c128a208>] ? acpi_evaluate_object+0x1f1/0x1fb
[ 9.244066] [<c126be9c>] ? acpi_execute_simple_method+0x4d/0x55
[ 9.244122] [<f82293f5>] ? acpi_video_device_lcd_set_level+0x2e/0xaf [video]
[ 9.244177] [<f822a2b0>] ? acpi_video_bus_register_backlight+0x3e9/0x5a8 [video]
[ 9.244238] [<c141e051>] ? printk+0x3d/0x3f
[ 9.244289] [<f822a9a7>] ? acpi_video_bus_add+0x4f1/0x653 [video]
[ 9.244342] [<c126f2db>] ? acpi_device_probe+0x3a/0xce
[ 9.244392] [<c12de1c2>] ? driver_probe_device+0x92/0x3a0
[ 9.244443] [<c126f139>] ? __acpi_match_device+0x2c/0x4c
[ 9.244493] [<c12de510>] ? __device_attach+0x40/0x40
[ 9.244541] [<c12de581>] ? __driver_attach+0x71/0x80
[ 9.244591] [<c12de510>] ? __device_attach+0x40/0x40
[ 9.244642] [<c12dc797>] ? bus_for_each_dev+0x47/0x80
[ 9.244691] [<c12ddcbe>] ? driver_attach+0x1e/0x20
[ 9.244740] [<c12de510>] ? __device_attach+0x40/0x40
[ 9.244789] [<c12dd917>] ? bus_add_driver+0x157/0x230
[ 9.244838] [<c12dec39>] ? driver_register+0x59/0xe0
[ 9.244890] [<f82293ad>] ? acpi_video_register+0x46/0x60 [video]
[ 9.244943] [<f824208c>] ? acpi_video_init+0x5f/0xfd3 [video]
[ 9.244994] [<c1000487>] ? do_one_initcall+0xb7/0x1f0
[ 9.245045] [<f824202d>] ? video_disable_native_backlight+0xe/0xe [video]
[ 9.245096] [<c1000492>] ? do_one_initcall+0xc2/0x1f0
[ 9.245149] [<f824202d>] ? video_disable_native_backlight+0xe/0xe [video]
[ 9.245203] [<c10e7dda>] ? free_pages_prepare+0xea/0x160
[ 9.245254] [<c110f138>] ? __vunmap+0x88/0xf0
[ 9.245303] [<c110f138>] ? __vunmap+0x88/0xf0
[ 9.245353] [<c1090399>] ? load_module+0x1a59/0x2330
[ 9.245407] [<c1090dd5>] ? SyS_finit_module+0x75/0xc0
[ 9.245457] [<c10f917b>] ? vm_mmap_pgoff+0x7b/0xa0
[ 9.245511] [<c14237ee>] ? sysenter_do_call+0x12/0x12
[ 9.245558] Code: 50 04 8b 00 89 57 04 89 07 eb 4e 0f b7 00 eb 02 8b 00 89 07 c7 47 04 00 00 00 00 eb 3c 83 fb 10 74 23 77 0b 83 fb 08 75 30 8b 17 <88> 10 eb 2a 83 fb 20 74 18 83 fb 40 75 20 8b 0f 8b 5f 04 89 08
[ 9.247742] EIP: [<c1283bde>] acpi_ex_system_memory_space_handler+0x1b5/0x1ed SS:ESP 0068:f73af84c
[ 9.247868] CR2: 0000000048b8ff05
[ 9.247956] ---[ end trace c4741417860f3b01 ]---
[ 9.405445] [drm] Initialized drm 1.1.0 20060810
[ 9.535307] [drm] radeon kernel modesetting enabled.
[ 10.359088] BTRFS info (device sdb1): enabling auto defrag
[ 10.359153] BTRFS info (device sdb1): disk space caching is enabled
[ 10.434120] BTRFS: bdev /dev/sdb1 errs: wr 1, rd 322, flush 0, corrupt 0, gen 0
[ 10.620368] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.649336] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.737150] systemd-journald[160]: Received request to flush runtime journal from PID 1
[ 10.880826] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 10.978211] kvm: Nested Virtualization enabled
[ 14.475967] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.522508] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.692108] NET: Registered protocol family 15
[ 19.360841] Initializing XFRM netlink socket
[ 19.372112] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 19.471768] cfg80211: Calling CRDA to update world regulatory domain
[ 19.998737] cfg80211: World regulatory domain updated:
[ 19.998800] cfg80211: DFS Master region: unset
[ 19.998843] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.998949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.999011] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.999072] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.999134] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.999198] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.999261] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 19.999322] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.999382] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 22.638337] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 22.777473] r8169 0000:04:00.0 eth0: link down
[ 22.778723] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.123285] r8169 0000:04:00.0 eth0: link up
[ 25.123305] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=5b88a8c5-acfe-4461-9a70-088d1aaf3c3c ro quiet systemd.show_status=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aea02fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aea03000-0x00000000aea55fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea56000-0x00000000af47efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af47f000-0x00000000af87bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af87c000-0x00000000af87cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af87d000-0x00000000af883fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af884000-0x00000000afc97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc98000-0x00000000afef2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0AFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13edfffff]
[ 0.000000] [mem 0x13c000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x13bffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13bffffff] page 2M
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xaea02fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xae9fffff] page 2M
[ 0.000000] [mem 0xaea00000-0xaea02fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaf87c000-0xaf87cfff]
[ 0.000000] [mem 0xaf87c000-0xaf87cfff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xaf884000-0xafc97fff]
[ 0.000000] [mem 0xaf884000-0xaf9fffff] page 4k
[ 0.000000] [mem 0xafa00000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafc97fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafef3000-0xafefffff]
[ 0.000000] [mem 0xafef3000-0xafefffff] page 4k
[ 0.000000] RAMDISK: [mem 0x360c6000-0x3705afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000AF470078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AF4759B8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000AF470178 00583F (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AF47DF80 000040
[ 0.000000] ACPI: APIC 0x00000000AF475AB0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AF475B18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000AF475B60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 0x00000000AF475BA0 000042 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AF475BE8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000AF475C20 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AF476000 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: BGRT 0x00000000AF477690 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13effffff]
[ 0.000000] NODE_DATA [mem 0x13eff7000-0x13effbfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013aa00000-ffff88013dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xaea02fff]
[ 0.000000] node 0: [mem 0xaf87c000-0xaf87cfff]
[ 0.000000] node 0: [mem 0xaf884000-0xafc97fff]
[ 0.000000] node 0: [mem 0xafef3000-0xafefffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 974273
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9738 pages used for memmap
[ 0.000000] DMA32 zone: 712229 pages, LIFO batch:31
[ 0.000000] Normal zone: 3528 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaea03000-0xaea55fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaea56000-0xaf47efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf47f000-0xaf87bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf87d000-0xaf883fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafc98000-0xafef2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013ec00000 s81792 r8192 d20608 u1048576
[ 0.000000] pcpu-alloc: s81792 r8192 d20608 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 960930
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=5b88a8c5-acfe-4461-9a70-088d1aaf3c3c ro quiet systemd.show_status=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3747968K/3897092K available (5201K kernel code, 943K rwdata, 1828K rodata, 1200K init, 840K bss, 149124K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.864 MHz processor
[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.72 BogoMIPS (lpj=6399456)
[ 0.000061] pid_max: default: 32768 minimum: 301
[ 0.000080] ACPI: Core revision 20140424
[ 0.010927] ACPI: All ACPI Tables successfully acquired
[ 0.011516] Security Framework initialized
[ 0.011532] AppArmor: AppArmor disabled by boot time parameter
[ 0.011535] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012030] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014696] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015941] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015959] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016461] Initializing cgroup subsys memory
[ 0.016477] Initializing cgroup subsys devices
[ 0.016493] Initializing cgroup subsys freezer
[ 0.016499] Initializing cgroup subsys net_cls
[ 0.016510] Initializing cgroup subsys blkio
[ 0.016519] Initializing cgroup subsys perf_event
[ 0.016523] Initializing cgroup subsys net_prio
[ 0.016577] tseg: 00aff00000
[ 0.016581] CPU: Physical Processor ID: 0
[ 0.016583] CPU: Processor Core ID: 0
[ 0.016587] mce: CPU supports 6 MCE banks
[ 0.016605] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.016792] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[ 0.019197] ftrace: allocating 21587 entries in 85 pages
[ 0.037209] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076901] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.182628] Performance Events: AMD PMU driver.
[ 0.182637] ... version: 0
[ 0.182639] ... bit width: 48
[ 0.182641] ... generic registers: 4
[ 0.182644] ... value mask: 0000ffffffffffff
[ 0.182646] ... max period: 00007fffffffffff
[ 0.182648] ... fixed-purpose events: 0
[ 0.182651] ... event mask: 000000000000000f
[ 0.185709] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.185970] x86: Booting SMP configuration:
[ 0.185975] .... node #0, CPUs: #1
[ 0.199047] x86: Booted up 1 node, 2 CPUs
[ 0.199052] smpboot: Total of 2 processors activated (6399.45 BogoMIPS)
[ 0.200075] devtmpfs: initialized
[ 0.210169] PM: Registering ACPI NVS region [mem 0xaea56000-0xaf47efff] (10653696 bytes)
[ 0.210654] PM: Registering ACPI NVS region [mem 0xaf87d000-0xaf883fff] (28672 bytes)
[ 0.212855] pinctrl core: initialized pinctrl subsystem
[ 0.213095] NET: Registered protocol family 16
[ 0.213368] cpuidle: using governor ladder
[ 0.213373] cpuidle: using governor menu
[ 0.213561] ACPI: bus type PCI registered
[ 0.213566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.213776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.213782] PCI: not using MMCONFIG
[ 0.213785] PCI: Using configuration type 1 for base access
[ 0.213787] PCI: Using configuration type 1 for extended access
[ 0.229190] ACPI: Added _OSI(Module Device)
[ 0.229197] ACPI: Added _OSI(Processor Device)
[ 0.229200] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229203] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.232124] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.247689] ACPI: Interpreter enabled
[ 0.247706] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.247716] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.247742] ACPI: (supports S0 S3 S4 S5)
[ 0.247746] ACPI: Using IOAPIC for interrupt routing
[ 0.247795] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.247886] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.248746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.360292] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.362663] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.362675] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.362688] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.363470] PCI host bridge to bus 0000:00
[ 0.363477] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.363482] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.363486] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.363490] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.363494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.363498] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.363502] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.363507] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.363521] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.363697] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.363715] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.363725] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.363736] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.363799] pci 0000:00:01.0: supports D1 D2
[ 0.363934] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.363950] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.364024] pci 0000:00:01.1: supports D1 D2
[ 0.364160] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.364240] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.364316] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.364424] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.364450] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.364463] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.364476] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.364488] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.364501] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.364514] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f3ff]
[ 0.364697] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.364716] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.364844] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.364935] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.364960] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.365060] pci 0000:00:12.2: supports D1 D2
[ 0.365063] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.365134] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.365224] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.365242] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.365370] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.365463] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.365488] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.365587] pci 0000:00:13.2: supports D1 D2
[ 0.365590] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.365663] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.365753] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.365960] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.365989] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.366069] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.366137] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.366225] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.366427] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.366529] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.366610] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.366629] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.366756] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.366847] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.366946] pci 0000:00:15.0: supports D1 D2
[ 0.367020] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.367119] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.367218] pci 0000:00:15.1: supports D1 D2
[ 0.367292] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.367385] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.367403] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.367530] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.367619] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.367645] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.367744] pci 0000:00:16.2: supports D1 D2
[ 0.367747] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.367820] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.367910] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.368064] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.368212] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.368363] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.368525] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.368674] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.368822] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.368973] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.369220] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.369338] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.369351] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.369355] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.369359] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.369363] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.369367] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.369372] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.369376] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.369473] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.369601] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.369627] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.369664] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.369689] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.369802] pci 0000:04:00.0: supports D1 D2
[ 0.369805] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.375267] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.375292] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.375310] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.376306] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15)
[ 0.376435] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15)
[ 0.376565] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15)
[ 0.376693] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15)
[ 0.376800] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[ 0.376888] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[ 0.376976] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[ 0.377063] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[ 0.377284] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.377709] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.377717] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.377729] vgaarb: loaded
[ 0.377732] vgaarb: bridge control possible 0000:00:01.0
[ 0.377875] PCI: Using ACPI for IRQ routing
[ 0.387584] PCI: pci_cache_line_size set to 64 bytes
[ 0.387675] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.387680] e820: reserve RAM buffer [mem 0xaea03000-0xafffffff]
[ 0.387683] e820: reserve RAM buffer [mem 0xaf87d000-0xafffffff]
[ 0.387686] e820: reserve RAM buffer [mem 0xafc98000-0xafffffff]
[ 0.387689] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.387692] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.387988] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.387996] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.390084] Switched to clocksource hpet
[ 0.402177] pnp: PnP ACPI init
[ 0.402220] ACPI: bus type PNP registered
[ 0.402484] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.402493] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.403045] system 00:01: [io 0x040b] has been reserved
[ 0.403050] system 00:01: [io 0x04d6] has been reserved
[ 0.403055] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.403060] system 00:01: [io 0x0c14] has been reserved
[ 0.403064] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.403068] system 00:01: [io 0x0c52] has been reserved
[ 0.403073] system 00:01: [io 0x0c6c] has been reserved
[ 0.403077] system 00:01: [io 0x0c6f] has been reserved
[ 0.403081] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.403085] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.403089] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.403093] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.403098] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.403103] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.403107] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.403111] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.403115] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.403122] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.403129] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.403134] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.403139] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.403144] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.403149] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.403154] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.403159] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.403165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.403352] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.403358] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.403581] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.403710] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.403717] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.403809] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.404219] pnp 00:06: [dma 0 disabled]
[ 0.404330] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.404599] system 00:07: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.404606] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.404814] pnp: PnP ACPI: found 8 devices
[ 0.404817] ACPI: bus type PNP unregistered
[ 0.419480] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.419492] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.419498] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.419535] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.419540] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.419545] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.419558] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.419569] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.419577] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.419582] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.419588] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.419594] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.419600] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.419607] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.419623] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.419638] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.419643] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.419652] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.419662] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.419665] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.419670] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.419673] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.419677] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.419681] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.419684] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.419688] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.419692] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.419696] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.419701] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.419704] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.419708] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.419711] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.419715] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.419718] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.419722] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.419726] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.419730] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.419833] NET: Registered protocol family 2
[ 0.420341] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.420533] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.420791] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.420886] TCP: reno registered
[ 0.420910] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.420962] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.421255] NET: Registered protocol family 1
[ 0.421292] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.754693] PCI: CLS 64 bytes, default 64
[ 0.754817] Unpacking initramfs...
[ 1.323515] Freeing initrd memory: 15956K (ffff8800360c6000 - ffff88003705b000)
[ 1.323584] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.323590] software IO TLB [mem 0xaaa03000-0xaea03000] (64MB) mapped at [ffff8800aaa03000-ffff8800aea02fff]
[ 1.323973] microcode: CPU0: patch_level=0x05000028
[ 1.324026] microcode: CPU1: patch_level=0x05000028
[ 1.324311] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.324329] LVT offset 0 assigned for vector 0x400
[ 1.324386] perf: AMD IBS detected (0x000000ff)
[ 1.325172] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.325269] audit: initializing netlink subsys (disabled)
[ 1.325319] audit: type=2000 audit(1424326716.212:1): initialized
[ 1.326259] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.326315] zbud: loaded
[ 1.326923] VFS: Disk quotas dquot_6.5.2
[ 1.326994] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.327146] msgmni has been set to 7351
[ 1.328182] alg: No test for stdrng (krng)
[ 1.328302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.328428] io scheduler noop registered
[ 1.328436] io scheduler deadline registered
[ 1.328512] io scheduler cfq registered (default)
[ 1.329229] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.329268] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.329424] GHES: HEST is not enabled!
[ 1.329738] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.350245] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.351719] Linux agpgart interface v0.103
[ 1.351964] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.355031] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355051] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.355715] mousedev: PS/2 mouse device common for all mice
[ 1.355855] rtc_cmos 00:03: RTC can wake from S4
[ 1.356226] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.356271] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.356314] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.356526] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.356528] AMD IOMMUv2 functionality not available on this system
[ 1.356712] TCP: cubic registered
[ 1.356827] NET: Registered protocol family 10
[ 1.357318] mip6: Mobile IPv6
[ 1.357326] NET: Registered protocol family 17
[ 1.357336] mpls_gso: MPLS GSO support
[ 1.358551] registered taskstats version 1
[ 1.359607] rtc_cmos 00:03: setting system clock to 2015-02-19 06:18:37 UTC (1424326717)
[ 1.359801] PM: Hibernation image not present or could not be loaded.
[ 1.362071] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[ 1.362147] Write protecting the kernel read-only data: 8192k
[ 1.367245] Freeing unused kernel memory: 932K (ffff880001517000 - ffff880001600000)
[ 1.368511] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[ 1.395868] systemd-udevd[60]: starting version 215
[ 1.396762] random: systemd-udevd urandom read with 3 bits of entropy available
[ 1.417623] ACPI: bus type USB registered
[ 1.417687] usbcore: registered new interface driver usbfs
[ 1.417712] usbcore: registered new interface driver hub
[ 1.424421] usbcore: registered new device driver usb
[ 1.425389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.425749] ehci-pci: EHCI PCI platform driver
[ 1.425943] QUIRK: Enable AMD PLL fix
[ 1.425984] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.425998] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.426014] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.426029] ehci-pci 0000:00:12.2: debug port 1
[ 1.426235] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 1.427049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.430717] SCSI subsystem initialized
[ 1.434809] libata version 3.00 loaded.
[ 1.438134] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.438285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.438290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.438294] usb usb1: Product: EHCI Host Controller
[ 1.438298] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.438302] usb usb1: SerialNumber: 0000:00:12.2
[ 1.438637] hub 1-0:1.0: USB hub found
[ 1.438661] hub 1-0:1.0: 5 ports detected
[ 1.439356] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.439371] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.439383] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.439398] ehci-pci 0000:00:13.2: debug port 1
[ 1.439454] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 1.447223] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.447249] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.447541] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.447865] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc9000064c000, 00:25:22:b4:d8:39, XID 0c200000 IRQ 40
[ 1.447871] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.450156] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.450274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.450279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450283] usb usb2: Product: EHCI Host Controller
[ 1.450287] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.450290] usb usb2: SerialNumber: 0000:00:13.2
[ 1.450555] hub 2-0:1.0: USB hub found
[ 1.450575] hub 2-0:1.0: 5 ports detected
[ 1.451087] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.451100] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.451109] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.451124] ehci-pci 0000:00:16.2: debug port 1
[ 1.451184] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 1.462321] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.462450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.462455] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.462459] usb usb3: Product: EHCI Host Controller
[ 1.462463] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.462467] usb usb3: SerialNumber: 0000:00:16.2
[ 1.462735] hub 3-0:1.0: USB hub found
[ 1.462754] hub 3-0:1.0: 4 ports detected
[ 1.463346] ahci 0000:00:11.0: version 3.0
[ 1.463672] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.463679] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 1.463914] ohci-pci: OHCI PCI platform driver
[ 1.466831] scsi0 : ahci
[ 1.467868] scsi1 : ahci
[ 1.468823] scsi2 : ahci
[ 1.470040] scsi3 : ahci
[ 1.471049] scsi4 : ahci
[ 1.472221] scsi5 : ahci
[ 1.472354] ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
[ 1.472360] ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
[ 1.472365] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
[ 1.472370] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
[ 1.472374] ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f300 irq 19
[ 1.472378] ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f380 irq 19
[ 1.472624] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.472644] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.472718] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 1.530420] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.530429] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.530433] usb usb4: Product: OHCI PCI host controller
[ 1.530437] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 1.530441] usb usb4: SerialNumber: 0000:00:12.0
[ 1.530969] hub 4-0:1.0: USB hub found
[ 1.530994] hub 4-0:1.0: 5 ports detected
[ 1.531452] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.531464] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.531519] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 1.590425] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.590434] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.590438] usb usb5: Product: OHCI PCI host controller
[ 1.590442] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 1.590446] usb usb5: SerialNumber: 0000:00:13.0
[ 1.590978] hub 5-0:1.0: USB hub found
[ 1.591001] hub 5-0:1.0: 5 ports detected
[ 1.591462] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.591475] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.591529] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 1.650427] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.650436] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650440] usb usb6: Product: OHCI PCI host controller
[ 1.650444] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 1.650448] usb usb6: SerialNumber: 0000:00:14.5
[ 1.650936] hub 6-0:1.0: USB hub found
[ 1.650959] hub 6-0:1.0: 2 ports detected
[ 1.651361] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.651374] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.651425] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 1.710437] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.710447] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710451] usb usb7: Product: OHCI PCI host controller
[ 1.710455] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 1.710458] usb usb7: SerialNumber: 0000:00:16.0
[ 1.710946] hub 7-0:1.0: USB hub found
[ 1.710972] hub 7-0:1.0: 4 ports detected
[ 1.790250] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.790340] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.790378] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.794324] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.862449] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 1.962238] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.962285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.963755] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 1.963763] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.964174] ata1.00: ATA-8: WDC WD2500AAKX-001CA0, 15.01H15, max UDMA/133
[ 1.964183] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.965225] ata1.00: configured for UDMA/133
[ 1.965438] ata3.00: configured for UDMA/133
[ 1.965480] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 1H15 PQ: 0 ANSI: 5
[ 1.966575] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 1.976376] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.976445] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.976497] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.976504] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.976555] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.976568] sd 0:0:0:0: [sda] Write Protect is off
[ 1.976574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.976618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.985100] sda: sda1 sda2 sda3
[ 1.986759] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.986845] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.986904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.997032] usb 1-4: New USB device found, idVendor=04a9, idProduct=190a
[ 1.997047] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.997055] usb 1-4: Product: CanoScan
[ 1.997063] usb 1-4: Manufacturer: Canon
[ 2.041003] sdb: sdb1
[ 2.042345] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.322128] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 2.334036] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[ 2.340371] microcode: CPU0: new patch_level=0x05000029
[ 2.346646] microcode: CPU1: new patch_level=0x05000029
[ 2.394204] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 2.418123] raid6: sse2x1 1044 MB/s
[ 2.486093] raid6: sse2x2 1477 MB/s
[ 2.554084] raid6: sse2x4 2181 MB/s
[ 2.554088] raid6: using algorithm sse2x4 (2181 MB/s)
[ 2.554091] raid6: using ssse3x2 recovery algorithm
[ 2.554632] xor: measuring software checksum speed
[ 2.562438] usb 4-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.562447] usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.562451] usb 4-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.562455] usb 4-1: Manufacturer: Microsoft
[ 2.566330] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.573365] usbcore: registered new interface driver usbhid
[ 2.573372] usbhid: USB HID core driver
[ 2.575156] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:045E:0040.0001/input/input2
[ 2.575431] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-1/input0
[ 2.594092] prefetch64-sse: 3449.000 MB/sec
[ 2.634084] generic_sse: 3225.000 MB/sec
[ 2.634087] xor: using function: prefetch64-sse (3449.000 MB/sec)
[ 2.682509] Btrfs loaded
[ 2.710222] usb 4-2: new low-speed USB device number 3 using ohci-pci
[ 2.741240] BTRFS: device label backup devid 1 transid 3288 /dev/sdb1
[ 2.746562] PM: Starting manual resume from disk
[ 2.746574] PM: Hibernation image partition 8:3 present
[ 2.746577] PM: Looking for hibernation image.
[ 2.747086] PM: Image not found (code -22)
[ 2.747093] PM: Hibernation image not present or could not be loaded.
[ 2.885423] usb 4-2: New USB device found, idVendor=045e, idProduct=0750
[ 2.885432] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.885436] usb 4-2: Product: Wired Keyboard 600
[ 2.885440] usb 4-2: Manufacturer: Microsoft
[ 2.894309] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:045E:0750.0002/input/input3
[ 2.894427] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input0
[ 2.903917] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:045E:0750.0003/input/input4
[ 2.904060] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input1
[ 2.920719] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.322351] Switched to clocksource tsc
[ 3.543931] random: nonblocking pool is initialized
[ 6.267731] lp: driver loaded but no devices found
[ 6.342328] ppdev: user-space parallel port driver
[ 6.451827] fuse init (API version 7.23)
[ 6.512100] loop: module loaded
[ 6.600904] w83627ehf: Found NCT6775F chip at 0x290
[ 6.990269] systemd-udevd[206]: starting version 215
[ 8.238792] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.550142] ACPI: acpi_idle registered with cpuidle
[ 8.572544] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.578035] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 8.578048] ACPI: Power Button [PWRB]
[ 8.578533] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 8.578540] ACPI: Power Button [PWRF]
[ 8.591722] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.591968] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.625501] acpi device:1d: registered as cooling_device2
[ 8.625678] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 8.642282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.760968] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.761106] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 8.816759] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.816878] sp5100_tco: PCI Revision ID: 0x42
[ 8.816925] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 8.816938] sp5100_tco: Last reboot was not triggered by watchdog.
[ 8.817030] sp5100_tco: initialized (0xffffc90000648b00). heartbeat=60 sec (nowayout=0)
[ 8.889461] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.930594] [drm] Initialized drm 1.1.0 20060810
[ 9.107778] [drm] radeon kernel modesetting enabled.
[ 9.126812] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1849:0x9802).
[ 9.126854] [drm] register mmio base: 0xFEB00000
[ 9.126857] [drm] register mmio size: 262144
[ 9.126947] ATOM BIOS: AMD
[ 9.127038] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 9.127044] radeon 0000:00:01.0: GTT: 1024M 0x0000000010000000 - 0x000000004FFFFFFF
[ 9.127048] [drm] Detected VRAM RAM=256M, BAR=256M
[ 9.127052] [drm] RAM width 32bits DDR
[ 9.127173] [TTM] Zone kernel: Available graphics memory: 1883148 kiB
[ 9.127177] [TTM] Initializing pool allocator
[ 9.127190] [TTM] Initializing DMA pool allocator
[ 9.127239] [drm] radeon: 256M of VRAM memory ready
[ 9.127242] [drm] radeon: 1024M of GTT memory ready.
[ 9.127275] [drm] Loading PALM Microcode
[ 9.187556] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[ 9.216358] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[ 9.230664] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[ 9.230695] [drm] Internal thermal controller without fan control
[ 9.230889] [drm] Found smc ucode version: 0x00010601
[ 9.231026] [drm] radeon: dpm initialized
[ 9.243770] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 9.243899] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.255005] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 9.255229] radeon 0000:00:01.0: WB enabled
[ 9.255236] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800a973cc00
[ 9.255241] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8800a973cc0c
[ 9.256011] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010ab2118
[ 9.256016] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.256018] [drm] Driver supports precise vblank timestamp query.
[ 9.256022] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.256055] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
[ 9.256079] radeon 0000:00:01.0: radeon: using MSI.
[ 9.256120] [drm] radeon: irq initialized.
[ 9.273352] [drm] ring test on 0 succeeded in 1 usecs
[ 9.273368] [drm] ring test on 3 succeeded in 3 usecs
[ 9.331690] [drm] ring test on 5 succeeded in 1 usecs
[ 9.352014] [drm] UVD initialized successfully.
[ 9.352815] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.352858] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.373995] [drm] ib test on ring 5 succeeded
[ 9.397218] [drm] Radeon Display Connectors
[ 9.397225] [drm] Connector 0:
[ 9.397228] [drm] HDMI-A-1
[ 9.397230] [drm] HPD1
[ 9.397235] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.397237] [drm] Encoders:
[ 9.397239] [drm] DFP1: INTERNAL_UNIPHY
[ 9.397242] [drm] Connector 1:
[ 9.397244] [drm] HDMI-A-2
[ 9.397245] [drm] HPD2
[ 9.397249] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.397251] [drm] Encoders:
[ 9.397252] [drm] DFP2: INTERNAL_UNIPHY
[ 9.397254] [drm] Connector 2:
[ 9.397256] [drm] VGA-1
[ 9.397259] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 9.397261] [drm] Encoders:
[ 9.397263] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.433655] [drm] fb mappable at 0xC0477000
[ 9.433661] [drm] vram apper at 0xC0000000
[ 9.433663] [drm] size 5242880
[ 9.433665] [drm] fb depth is 24
[ 9.433667] [drm] pitch is 5120
[ 9.433813] fbcon: radeondrmfb (fb0) is primary device
[ 9.475839] Console: switching to colour frame buffer device 160x64
[ 9.484128] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 9.484133] radeon 0000:00:01.0: registered panic notifier
[ 9.498501] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[ 9.500001] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 9.574584] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 9.613024] kvm: Nested Virtualization enabled
[ 9.613041] kvm: Nested Paging enabled
[ 9.629407] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 9.629423] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.629427] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.629431] sound hdaudioC1D0: mono: mono_out=0x0
[ 9.629435] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 9.629438] sound hdaudioC1D0: inputs:
[ 9.629444] sound hdaudioC1D0: Front Mic=0x19
[ 9.629448] sound hdaudioC1D0: Rear Mic=0x18
[ 9.629452] sound hdaudioC1D0: Line=0x1a
[ 9.647122] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 9.647302] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 9.647446] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 9.647581] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 9.647710] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 9.647838] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 9.647967] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 10.067920] BTRFS info (device sdb1): enabling auto defrag
[ 10.067936] BTRFS info (device sdb1): disk space caching is enabled
[ 10.110838] BTRFS: bdev /dev/sdb1 errs: wr 1, rd 322, flush 0, corrupt 0, gen 0
[ 10.930272] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 11.585415] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.628372] systemd-journald[174]: Received request to flush runtime journal from PID 1
[ 17.081862] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.138530] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.780049] NET: Registered protocol family 15
[ 21.108354] Initializing XFRM netlink socket
[ 23.571014] cfg80211: Calling CRDA to update world regulatory domain
[ 25.223578] cfg80211: World regulatory domain updated:
[ 25.223596] cfg80211: DFS Master region: unset
[ 25.223602] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 25.223612] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.223620] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.223627] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.223636] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 25.223645] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 25.223652] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 25.223659] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.223666] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 25.570897] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 25.710224] r8169 0000:04:00.0 eth0: link down
[ 25.710259] r8169 0000:04:00.0 eth0: link down
[ 25.710458] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.018654] r8169 0000:04:00.0 eth0: link up
[ 28.018682] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aea02fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aea03000-0x00000000aea55fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea56000-0x00000000af47efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af47f000-0x00000000af87bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af87c000-0x00000000af87cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af87d000-0x00000000af883fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af884000-0x00000000afc97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc98000-0x00000000afef2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0AFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [c00fd6e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE
[ 0.000000] BRK [0x01797000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] BRK [0x0179a000, 0x0179afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3618c000-0x370bdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0xAF470078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0xAF4759B8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0xAF470178 00583F (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0xAF47DF80 000040
[ 0.000000] ACPI: APIC 0xAF475AB0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0xAF475B18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0xAF475B60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 0xAF475BA0 000042 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0xAF475BE8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0xAF475C20 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0xAF476000 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: BGRT 0xAF477690 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4218MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xaea02fff]
[ 0.000000] node 0: [mem 0xaf87c000-0xaf87cfff]
[ 0.000000] node 0: [mem 0xaf884000-0xafc97fff]
[ 0.000000] node 0: [mem 0xafef3000-0xafefffff]
[ 0.000000] node 0: [mem 0x00001000-0x3effffff]
[ 0.000000] On node 0 totalpages: 974273
[ 0.000000] free_area_init_node: node 0, pgdat c1656e40, node_mem_map f39ac020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8437 pages used for memmap
[ 0.000000] HighMem zone: 747558 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75cf000 s35392 r0 d21952 u57344
[ 0.000000] pcpu-alloc: s35392 r0 d21952 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 972501
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=5b88a8c5-acfe-4461-9a70-088d1aaf3c3c ro quiet systemd.show_status=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0013f000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3831864K/3897092K available (4594K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 65228K reserved, 2990232K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166b000 - 0xc170f000 ( 656 kB)
.data : 0xc147cdc0 - 0xc1669800 (1970 kB)
.text : 0xc1000000 - 0xc147cdc0 (4595 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f3406000 soft=f3408000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.997 MHz processor
[ 0.000054] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.99 BogoMIPS (lpj=6399988)
[ 0.000060] pid_max: default: 32768 minimum: 301
[ 0.000077] ACPI: Core revision 20140424
[ 0.009891] ACPI: All ACPI Tables successfully acquired
[ 0.010458] Security Framework initialized
[ 0.010474] AppArmor: AppArmor disabled by boot time parameter
[ 0.010478] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010510] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010515] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010915] Initializing cgroup subsys memory
[ 0.010926] Initializing cgroup subsys devices
[ 0.010941] Initializing cgroup subsys freezer
[ 0.010948] Initializing cgroup subsys net_cls
[ 0.010958] Initializing cgroup subsys blkio
[ 0.010967] Initializing cgroup subsys perf_event
[ 0.010972] Initializing cgroup subsys net_prio
[ 0.011016] CPU: Physical Processor ID: 0
[ 0.011019] CPU: Processor Core ID: 0
[ 0.011025] mce: CPU supports 6 MCE banks
[ 0.011045] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.011350] Freeing SMP alternatives memory: 20K (c170f000 - c1714000)
[ 0.013403] ftrace: allocating 20730 entries in 41 pages
[ 0.031250] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.031593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071283] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.178841] Performance Events: AMD PMU driver.
[ 0.178850] ... version: 0
[ 0.178853] ... bit width: 48
[ 0.178855] ... generic registers: 4
[ 0.178858] ... value mask: 0000ffffffffffff
[ 0.178860] ... max period: 00007fffffffffff
[ 0.178863] ... fixed-purpose events: 0
[ 0.178865] ... event mask: 000000000000000f
[ 0.181701] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.181925] CPU 1 irqstacks, hard=f3542000 soft=f3544000
[ 0.181929] x86: Booting SMP configuration:
[ 0.181932] .... node #0, CPUs: #1
[ 0.191903] Initializing CPU#1
[ 0.195004] x86: Booted up 1 node, 2 CPUs
[ 0.195010] smpboot: Total of 2 processors activated (6399.98 BogoMIPS)
[ 0.196017] devtmpfs: initialized
[ 0.196656] PM: Registering ACPI NVS region [mem 0xaea56000-0xaf47efff] (10653696 bytes)
[ 0.197018] PM: Registering ACPI NVS region [mem 0xaf87d000-0xaf883fff] (28672 bytes)
[ 0.199208] pinctrl core: initialized pinctrl subsystem
[ 0.199412] NET: Registered protocol family 16
[ 0.199631] cpuidle: using governor ladder
[ 0.199637] cpuidle: using governor menu
[ 0.199825] ACPI: bus type PCI registered
[ 0.199831] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200026] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.200032] PCI: not using MMCONFIG
[ 0.200636] PCI: Using configuration type 1 for base access
[ 0.200638] PCI: Using configuration type 1 for extended access
[ 0.212864] ACPI: Added _OSI(Module Device)
[ 0.212872] ACPI: Added _OSI(Processor Device)
[ 0.212876] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212879] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216007] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.227875] ACPI: Interpreter enabled
[ 0.227899] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.227909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.227936] ACPI: (supports S0 S3 S4 S5)
[ 0.227941] ACPI: Using IOAPIC for interrupt routing
[ 0.227989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.228074] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.228077] PCI: Using MMCONFIG for extended config space
[ 0.228111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.340106] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.342462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.342474] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.342485] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.343229] PCI host bridge to bus 0000:00
[ 0.343235] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.343240] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.343245] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.343249] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.343253] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.343258] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.343262] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.343266] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.343283] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.343462] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.343481] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.343493] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.343504] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.343569] pci 0000:00:01.0: supports D1 D2
[ 0.343708] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.343724] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.343800] pci 0000:00:01.1: supports D1 D2
[ 0.343937] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.344019] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.344095] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.344208] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.344234] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.344248] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.344261] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.344275] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.344288] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.344302] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f3ff]
[ 0.344488] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.344508] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.344638] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.344732] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.344757] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.344858] pci 0000:00:12.2: supports D1 D2
[ 0.344862] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.344933] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.345025] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.345044] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.345172] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.345263] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.345289] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.345390] pci 0000:00:13.2: supports D1 D2
[ 0.345393] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.345464] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.345556] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.345765] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.345794] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.345875] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.345943] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.346025] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.346228] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.346330] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.346413] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.346432] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.346559] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.346650] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.346751] pci 0000:00:15.0: supports D1 D2
[ 0.346826] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.346916] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.347023] pci 0000:00:15.1: supports D1 D2
[ 0.347098] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.347193] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.347212] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.347341] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.347433] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.347458] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.347559] pci 0000:00:16.2: supports D1 D2
[ 0.347563] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.347633] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.347726] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.347883] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.348035] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.348187] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.348354] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.348504] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.348656] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.348807] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.349050] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.349174] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.349187] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.349192] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.349196] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.349200] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.349205] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.349209] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.349213] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.349311] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.349444] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.349471] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.349510] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.349535] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.349650] pci 0000:04:00.0: supports D1 D2
[ 0.349654] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.355126] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.355153] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.355170] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.355206] pci_bus 0000:00: on NUMA node 0
[ 0.356159] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15)
[ 0.356283] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15)
[ 0.356407] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15)
[ 0.356530] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15)
[ 0.356633] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[ 0.356717] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[ 0.356801] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[ 0.356885] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[ 0.357111] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.357525] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.357534] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.357547] vgaarb: loaded
[ 0.357550] vgaarb: bridge control possible 0000:00:01.0
[ 0.357686] PCI: Using ACPI for IRQ routing
[ 0.367406] PCI: pci_cache_line_size set to 64 bytes
[ 0.367499] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.367504] e820: reserve RAM buffer [mem 0xaea03000-0xafffffff]
[ 0.367508] e820: reserve RAM buffer [mem 0xaf87d000-0xafffffff]
[ 0.367512] e820: reserve RAM buffer [mem 0xafc98000-0xafffffff]
[ 0.367515] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.367519] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.367819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.367827] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371922] Switched to clocksource hpet
[ 0.381966] pnp: PnP ACPI init
[ 0.382010] ACPI: bus type PNP registered
[ 0.382265] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.382273] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382809] system 00:01: [io 0x040b] has been reserved
[ 0.382815] system 00:01: [io 0x04d6] has been reserved
[ 0.382820] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.382824] system 00:01: [io 0x0c14] has been reserved
[ 0.382829] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.382834] system 00:01: [io 0x0c52] has been reserved
[ 0.382838] system 00:01: [io 0x0c6c] has been reserved
[ 0.382843] system 00:01: [io 0x0c6f] has been reserved
[ 0.382850] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.382854] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.382859] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.382863] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.382868] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.382873] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.382877] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.382882] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.382886] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.382891] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.382897] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.382902] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.382907] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.382913] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.382917] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.382923] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.382928] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.382934] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383118] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.383124] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383340] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.383465] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.383472] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383569] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383996] pnp 00:06: [dma 0 disabled]
[ 0.384113] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.384368] system 00:07: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.384374] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384569] pnp: PnP ACPI: found 8 devices
[ 0.384572] ACPI: bus type PNP unregistered
[ 0.384582] PnPBIOS: Disabled by ACPI PNP
[ 0.428307] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.428321] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.428328] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.428364] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.428369] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.428374] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.428387] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.428404] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.428414] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.428420] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.428425] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.428433] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.428440] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.428448] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.428465] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.428480] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.428485] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.428496] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.428506] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.428511] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.428515] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.428519] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.428523] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.428527] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.428531] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.428536] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.428540] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.428544] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.428549] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.428553] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.428557] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.428561] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.428565] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.428570] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.428574] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.428578] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.428583] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.428678] NET: Registered protocol family 2
[ 0.429109] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.429165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.429201] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.429245] TCP: reno registered
[ 0.429250] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.429261] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.429432] NET: Registered protocol family 1
[ 0.429462] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.760530] PCI: CLS 64 bytes, default 64
[ 0.760649] Unpacking initramfs...
[ 1.343196] Freeing initrd memory: 15560K (f618c000 - f70be000)
[ 1.343615] microcode: CPU0: patch_level=0x05000028
[ 1.343633] microcode: CPU1: patch_level=0x05000028
[ 1.343965] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.343985] LVT offset 0 assigned for vector 0x400
[ 1.344015] perf: AMD IBS detected (0x000000ff)
[ 1.344743] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.344835] audit: initializing netlink subsys (disabled)
[ 1.344869] audit: type=2000 audit(1424326526.232:1): initialized
[ 1.345674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.345713] zbud: loaded
[ 1.346188] VFS: Disk quotas dquot_6.5.2
[ 1.346255] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.346365] msgmni has been set to 1674
[ 1.347363] alg: No test for stdrng (krng)
[ 1.347463] bounce: pool size: 64 pages
[ 1.347544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.347703] io scheduler noop registered
[ 1.347716] io scheduler deadline registered
[ 1.347796] io scheduler cfq registered (default)
[ 1.348571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.348614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.348765] GHES: HEST is not enabled!
[ 1.348800] isapnp: Scanning for PnP cards...
[ 1.702866] isapnp: No Plug & Play device found
[ 1.703230] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.723770] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.725484] Linux agpgart interface v0.103
[ 1.725895] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.728917] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.728939] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.729600] mousedev: PS/2 mouse device common for all mice
[ 1.729746] rtc_cmos 00:03: RTC can wake from S4
[ 1.730100] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.730145] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.730190] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.730607] TCP: cubic registered
[ 1.730713] NET: Registered protocol family 10
[ 1.731417] mip6: Mobile IPv6
[ 1.731431] NET: Registered protocol family 17
[ 1.731442] mpls_gso: MPLS GSO support
[ 1.732017] Using IPI No-Shortcut mode
[ 1.732733] registered taskstats version 1
[ 1.733597] rtc_cmos 00:03: setting system clock to 2015-02-19 06:15:27 UTC (1424326527)
[ 1.733787] PM: Hibernation image not present or could not be loaded.
[ 1.734269] Freeing unused kernel memory: 656K (c166b000 - c170f000)
[ 1.734350] Write protecting the kernel text: 4596k
[ 1.734419] Write protecting the kernel read-only data: 1452k
[ 1.734421] NX-protecting the kernel data: 3596k
[ 1.761810] systemd-udevd[60]: starting version 215
[ 1.762692] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.783206] ACPI: bus type USB registered
[ 1.783272] usbcore: registered new interface driver usbfs
[ 1.783303] usbcore: registered new interface driver hub
[ 1.790781] SCSI subsystem initialized
[ 1.790892] usbcore: registered new device driver usb
[ 1.791962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.792621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.793081] ehci-pci: EHCI PCI platform driver
[ 1.793286] QUIRK: Enable AMD PLL fix
[ 1.793340] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.793355] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.793372] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.793389] ehci-pci 0000:00:12.2: debug port 1
[ 1.793462] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 1.795693] libata version 3.00 loaded.
[ 1.804118] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.804235] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.804241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.804245] usb usb1: Product: EHCI Host Controller
[ 1.804249] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.804253] usb usb1: SerialNumber: 0000:00:12.2
[ 1.804655] hub 1-0:1.0: USB hub found
[ 1.804695] hub 1-0:1.0: 5 ports detected
[ 1.805216] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.805231] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.805241] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.805257] ehci-pci 0000:00:13.2: debug port 1
[ 1.805309] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 1.809399] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.809417] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.809712] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.810087] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xf7e16000, 00:25:22:b4:d8:39, XID 0c200000 IRQ 40
[ 1.810092] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.816030] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.816144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.816149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.816154] usb usb2: Product: EHCI Host Controller
[ 1.816158] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.816161] usb usb2: SerialNumber: 0000:00:13.2
[ 1.816462] hub 2-0:1.0: USB hub found
[ 1.816479] hub 2-0:1.0: 5 ports detected
[ 1.816993] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.817007] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.817021] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.817036] ehci-pci 0000:00:16.2: debug port 1
[ 1.817087] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 1.827954] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.828075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.828080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.828085] usb usb3: Product: EHCI Host Controller
[ 1.828089] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.828093] usb usb3: SerialNumber: 0000:00:16.2
[ 1.828362] hub 3-0:1.0: USB hub found
[ 1.828379] hub 3-0:1.0: 4 ports detected
[ 1.829119] ohci-pci: OHCI PCI platform driver
[ 1.829317] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.829331] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.829390] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 1.888253] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.888262] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.888267] usb usb4: Product: OHCI PCI host controller
[ 1.888271] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 1.888275] usb usb4: SerialNumber: 0000:00:12.0
[ 1.888788] hub 4-0:1.0: USB hub found
[ 1.888810] hub 4-0:1.0: 5 ports detected
[ 1.889121] ahci 0000:00:11.0: version 3.0
[ 1.889439] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.889446] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 1.891374] scsi0 : ahci
[ 1.891605] scsi1 : ahci
[ 1.891803] scsi2 : ahci
[ 1.892025] scsi3 : ahci
[ 1.892197] scsi4 : ahci
[ 1.892394] scsi5 : ahci
[ 1.892514] ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
[ 1.892520] ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
[ 1.892524] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
[ 1.892529] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
[ 1.892533] ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f300 irq 19
[ 1.892538] ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f380 irq 19
[ 1.892837] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.892854] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.892904] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 1.952252] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.952261] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.952266] usb usb5: Product: OHCI PCI host controller
[ 1.952270] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 1.952274] usb usb5: SerialNumber: 0000:00:13.0
[ 1.952793] hub 5-0:1.0: USB hub found
[ 1.952816] hub 5-0:1.0: 5 ports detected
[ 1.953292] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.953305] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.953352] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 2.012261] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.012271] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.012276] usb usb6: Product: OHCI PCI host controller
[ 2.012280] usb usb6: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.012283] usb usb6: SerialNumber: 0000:00:14.5
[ 2.012801] hub 6-0:1.0: USB hub found
[ 2.012823] hub 6-0:1.0: 2 ports detected
[ 2.013235] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.013248] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.013300] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.072257] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.072267] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.072271] usb usb7: Product: OHCI PCI host controller
[ 2.072276] usb usb7: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 2.072279] usb usb7: SerialNumber: 0000:00:16.0
[ 2.072800] hub 7-0:1.0: USB hub found
[ 2.072824] hub 7-0:1.0: 4 ports detected
[ 2.212223] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.212270] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.212327] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.212355] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.228126] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 2.340163] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 2.363008] usb 1-4: New USB device found, idVendor=04a9, idProduct=190a
[ 2.363025] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.363033] usb 1-4: Product: CanoScan
[ 2.363041] usb 1-4: Manufacturer: Canon
[ 2.384224] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.384263] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.385707] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 2.385717] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.386153] ata1.00: ATA-8: WDC WD2500AAKX-001CA0, 15.01H15, max UDMA/133
[ 2.386163] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.387531] ata1.00: configured for UDMA/133
[ 2.387588] ata3.00: configured for UDMA/133
[ 2.387993] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 1H15 PQ: 0 ANSI: 5
[ 2.388986] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 2.396963] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.396980] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.397097] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.397103] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.397138] sd 0:0:0:0: [sda] Write Protect is off
[ 2.397144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.397151] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.397192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404408] sda: sda1 sda2 sda3
[ 2.405914] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.462258] sdb: sdb1
[ 2.462932] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.464215] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.464505] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.756150] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 2.784496] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[ 2.790832] microcode: CPU0: new patch_level=0x05000029
[ 2.797108] microcode: CPU1: new patch_level=0x05000029
[ 2.868024] raid6: mmxx1 615 MB/s
[ 2.924231] usb 4-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.924241] usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.924246] usb 4-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.924250] usb 4-1: Manufacturer: Microsoft
[ 2.928539] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.934053] usbcore: registered new interface driver usbhid
[ 2.934062] usbhid: USB HID core driver
[ 2.935715] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:045E:0040.0001/input/input2
[ 2.935941] raid6: mmxx2 1030 MB/s
[ 2.936023] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-1/input0
[ 3.003968] raid6: sse1x1 613 MB/s
[ 3.064043] usb 4-2: new low-speed USB device number 3 using ohci-pci
[ 3.071922] raid6: sse1x2 1009 MB/s
[ 3.139953] raid6: sse2x1 1045 MB/s
[ 3.207960] raid6: sse2x2 1461 MB/s
[ 3.207964] raid6: using algorithm sse2x2 (1461 MB/s)
[ 3.207967] raid6: using ssse3x1 recovery algorithm
[ 3.208697] xor: measuring software checksum speed
[ 3.235195] usb 4-2: New USB device found, idVendor=045e, idProduct=0750
[ 3.235206] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.235210] usb 4-2: Product: Wired Keyboard 600
[ 3.235214] usb 4-2: Manufacturer: Microsoft
[ 3.245539] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:045E:0750.0002/input/input3
[ 3.246074] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input0
[ 3.247924] pIII_sse : 3222.000 MB/sec
[ 3.258581] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:045E:0750.0003/input/input4
[ 3.259122] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-2/input1
[ 3.287921] prefetch64-sse: 3463.000 MB/sec
[ 3.287925] xor: using function: prefetch64-sse (3463.000 MB/sec)
[ 3.324341] Btrfs loaded
[ 3.340347] Switched to clocksource tsc
[ 3.402110] BTRFS: device label backup devid 1 transid 3287 /dev/sdb1
[ 3.407343] PM: Starting manual resume from disk
[ 3.407357] PM: Hibernation image partition 8:3 present
[ 3.407360] PM: Looking for hibernation image.
[ 3.407888] PM: Image not found (code -22)
[ 3.407896] PM: Hibernation image not present or could not be loaded.
[ 3.557268] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.231488] random: nonblocking pool is initialized
[ 6.615253] lp: driver loaded but no devices found
[ 6.680852] ppdev: user-space parallel port driver
[ 6.913881] fuse init (API version 7.23)
[ 7.014962] loop: module loaded
[ 7.141421] w83627ehf: Found NCT6775F chip at 0x290
[ 7.526379] systemd-udevd[203]: starting version 215
[ 8.872409] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.158332] ACPI: acpi_idle registered with cpuidle
[ 9.167746] acpi-cpufreq: overriding BIOS provided _PSD data
[ 9.189319] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 9.189340] ACPI: Power Button [PWRB]
[ 9.189568] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 9.189578] ACPI: Power Button [PWRF]
[ 9.273695] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.273866] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9.274048] BUG: unable to handle kernel paging request at 4898ff05
[ 9.274184] IP: [<c12d4c90>] acpi_ex_system_memory_space_handler+0x1b5/0x1ed
[ 9.274285] *pdpt = 00000000369f8001 *pde = 0000000000000000
[ 9.274413] Oops: 0002 [#1] SMP
[ 9.274535] Modules linked in: video(+) snd_timer(+) snd soundcore button acpi_cpufreq processor thermal_sys w83627ehf hwmon_vid loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 crc32c_generic btrfs xor hid_generic usbhid hid raid6_pq sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ohci_pci r8169 mii ahci libahci libata ehci_pci ohci_hcd ehci_hcd scsi_mod usbcore usb_common
[ 9.276324] CPU: 1 PID: 290 Comm: systemd-udevd Not tainted 3.16.0-4-686-pae #1 Debian 3.16.7-ckt4-3
[ 9.276389] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
[ 9.276456] task: f2db6010 ti: f37de000 task.ti: f37de000
[ 9.276511] EIP: 0060:[<c12d4c90>] EFLAGS: 00010246 CPU: 1
[ 9.276564] EIP is at acpi_ex_system_memory_space_handler+0x1b5/0x1ed
[ 9.276618] EAX: 4898ff05 EBX: 00000008 ECX: 000000fb EDX: 00000001
[ 9.276671] ESI: 00000000 EDI: f37df960 EBP: f37df884 ESP: f37df848
[ 9.276724] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 9.276776] CR0: 80050033 CR2: 4898ff05 CR3: 32c37000 CR4: 000007f0
[ 9.276829] Stack:
[ 9.276874] 00000286 000080d0 00000246 f37df870 00000014 000080d0 00000000 00000000
[ 9.277205] 00000001 000000fb 00000000 ffffff05 f3428ef8 c12d4adb 00000000 f37df8c4
[ 9.277534] c12ceaab f37df960 00000000 f69f9600 00000000 f34c55c0 f37df91c 00000001
[ 9.277865] Call Trace:
[ 9.277919] [<c12d4adb>] ? acpi_ex_do_logical_op+0x15f/0x15f
[ 9.277974] [<c12ceaab>] ? acpi_ev_address_space_dispatch+0x1c7/0x219
[ 9.278031] [<c12d1c3f>] ? acpi_ex_access_region+0x1e0/0x269
[ 9.278088] [<c12d2098>] ? acpi_ex_field_datum_io+0x108/0x1ce
[ 9.278143] [<c1257477>] ? number.isra.2+0x397/0x3a0
[ 9.278198] [<c12d2249>] ? acpi_ex_write_with_update_rule+0xeb/0xf3
[ 9.278253] [<c1256af4>] ? format_decode+0x344/0x3b0
[ 9.278307] [<c12d1f78>] ? acpi_ex_insert_into_field+0x2b0/0x2c8
[ 9.278362] [<c12d1a3c>] ? acpi_ex_write_data_to_field+0x1d7/0x1fa
[ 9.278419] [<c12e30ed>] ? acpi_ut_allocate_object_desc_dbg+0x3a/0x66
[ 9.278475] [<c12d5997>] ? acpi_ex_store_object_to_node+0x9f/0xb2
[ 9.278530] [<c12d5a64>] ? acpi_ex_store+0xba/0x216
[ 9.278584] [<c12d3126>] ? acpi_ex_opcode_1A_1T_1R+0x426/0x53a
[ 9.278639] [<c12d55db>] ? acpi_ex_resolve_operands+0x1db/0x4c2
[ 9.278694] [<c12cbb61>] ? acpi_ds_exec_end_op+0xc4/0x3a5
[ 9.278749] [<c12dc1c2>] ? acpi_ps_get_next_arg+0x300/0x35f
[ 9.278804] [<c12bc961>] ? acpi_os_release_object+0xd/0x11
[ 9.278858] [<c12dd3b1>] ? acpi_ps_append_arg+0x1e/0x7f
[ 9.278911] [<c12dc6c5>] ? acpi_ps_parse_loop+0x4a4/0x4ef
[ 9.278966] [<c12e3c80>] ? acpi_ut_create_generic_state+0x31/0x3b
[ 9.279021] [<c12dd03c>] ? acpi_ps_parse_aml+0x8a/0x23c
[ 9.279075] [<c12dd78a>] ? acpi_ps_execute_method+0x19e/0x23c
[ 9.279130] [<c12d87b1>] ? acpi_ns_evaluate+0x1b8/0x243
[ 9.279183] [<c12dae1b>] ? acpi_evaluate_object+0xc7/0x1fb
[ 9.279237] [<c12dae64>] ? acpi_evaluate_object+0x110/0x1fb
[ 9.279291] [<c12e2ef3>] ? acpi_ut_release_mutex+0x69/0x78
[ 9.279345] [<c12e1d13>] ? acpi_ut_update_object_reference+0xec/0x159
[ 9.279400] [<c12daf45>] ? acpi_evaluate_object+0x1f1/0x1fb
[ 9.279454] [<c12bcdf6>] ? acpi_execute_simple_method+0x4d/0x55
[ 9.279513] [<f7f4c3f5>] ? acpi_video_device_lcd_set_level+0x2e/0xaf [video]
[ 9.279573] [<f7f4d2a3>] ? acpi_video_bus_register_backlight+0x3ec/0x5ab [video]
[ 9.279640] [<c1473fe1>] ? printk+0x3d/0x3f
[ 9.279696] [<f7f4d98d>] ? acpi_video_bus_add+0x4e4/0x64e [video]
[ 9.279752] [<c12bffd8>] ? acpi_device_probe+0x3a/0xce
[ 9.279806] [<c133f6c3>] ? driver_probe_device+0x93/0x3a0
[ 9.279861] [<c12bfe36>] ? __acpi_match_device+0x2c/0x4c
[ 9.279915] [<c133fa10>] ? __device_attach+0x40/0x40
[ 9.279968] [<c133fa81>] ? __driver_attach+0x71/0x80
[ 9.280021] [<c133fa10>] ? __device_attach+0x40/0x40
[ 9.280074] [<c133db97>] ? bus_for_each_dev+0x47/0x80
[ 9.280127] [<c133f1ce>] ? driver_attach+0x1e/0x20
[ 9.280179] [<c133fa10>] ? __device_attach+0x40/0x40
[ 9.280232] [<c133ee27>] ? bus_add_driver+0x157/0x230
[ 9.280285] [<c1340149>] ? driver_register+0x59/0xe0
[ 9.280341] [<f7f4c3ad>] ? acpi_video_register+0x46/0x60 [video]
[ 9.280398] [<f80390ab>] ? acpi_video_init+0x7e/0xfd3 [video]
[ 9.280454] [<c1002127>] ? do_one_initcall+0xb7/0x1f0
[ 9.280510] [<f803902d>] ? video_disable_native_backlight+0xe/0xe [video]
[ 9.280565] [<c1002132>] ? do_one_initcall+0xc2/0x1f0
[ 9.280621] [<f803902d>] ? video_disable_native_backlight+0xe/0xe [video]
[ 9.280681] [<c1149968>] ? __vunmap+0x88/0xf0
[ 9.280734] [<c1149968>] ? __vunmap+0x88/0xf0
[ 9.280788] [<c10c12bb>] ? load_module+0x1cbb/0x2390
[ 9.280848] [<c10c1af5>] ? SyS_finit_module+0x75/0xc0
[ 9.280904] [<c112f60b>] ? vm_mmap_pgoff+0x7b/0xa0
[ 9.280964] [<c147ae5f>] ? sysenter_do_call+0x12/0x12
[ 9.281015] Code: 50 04 8b 00 89 57 04 89 07 eb 4e 0f b7 00 eb 02 8b 00 89 07 c7 47 04 00 00 00 00 eb 3c 83 fb 10 74 23 77 0b 83 fb 08 75 30 8b 17 <88> 10 eb 2a 83 fb 20 74 18 83 fb 40 75 20 8b 0f 8b 5f 04 89 08
[ 9.283282] EIP: [<c12d4c90>] acpi_ex_system_memory_space_handler+0x1b5/0x1ed SS:ESP 0068:f37df848
[ 9.283416] CR2: 000000004898ff05
[ 9.283534] ---[ end trace 074df610b2e820a8 ]---
[ 9.317919] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.318089] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 9.336145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.342117] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 9.342389] sp5100_tco: PCI Revision ID: 0x42
[ 9.342509] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 9.342586] sp5100_tco: Last reboot was not triggered by watchdog.
[ 9.344992] sp5100_tco: initialized (0xf7e4ab00). heartbeat=60 sec (nowayout=0)
[ 9.416053] [drm] Initialized drm 1.1.0 20060810
[ 9.540449] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.544417] [drm] radeon kernel modesetting enabled.
[ 9.774885] kvm: Nested Virtualization enabled
[ 9.774947] kvm: Nested Paging enabled
[ 10.291987] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 10.385849] BTRFS info (device sdb1): enabling auto defrag
[ 10.385940] BTRFS info (device sdb1): disk space caching is enabled
[ 10.445521] BTRFS: bdev /dev/sdb1 errs: wr 1, rd 322, flush 0, corrupt 0, gen 0
[ 10.547009] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.578983] systemd-journald[174]: Received request to flush runtime journal from PID 1
[ 14.971883] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.023741] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.157389] NET: Registered protocol family 15
[ 19.273016] Initializing XFRM netlink socket
[ 20.232708] cfg80211: Calling CRDA to update world regulatory domain
[ 20.602009] cfg80211: World regulatory domain updated:
[ 20.602091] cfg80211: DFS Master region: unset
[ 20.602144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 20.602279] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.602362] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.602443] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.602526] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 20.602612] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 20.602697] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 20.602778] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.602859] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 23.123043] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 23.264009] r8169 0000:04:00.0 eth0: link down
[ 23.264097] r8169 0000:04:00.0 eth0: link down
[ 23.264644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.588781] r8169 0000:04:00.0 eth0: link up
[ 25.588804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--- End Message ---