--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16-2-amd64: Fail to write on ext3 filesystem of an external USB hard drive
- From: Sebastien Helleu <flashcode@flashtux.org>
- Date: Sat, 04 Oct 2014 12:53:29 +0200
- Message-id: <20141004105329.1395.21820.reportbug@omega>
Package: src:linux
Version: 3.16.3-2
Severity: important
Dear Maintainer,
I'm not able to write on my USB external hard drive, which has filesystem ext3.
Here are the steps and error messages I got:
root@omega:~# mount -t ext3 /dev/sdc1 /mnt/lacie
No error, mount is OK:
root@omega:~# mount
(...)
/dev/sdc1 on /mnt/lacie type ext3 (rw,relatime,data=ordered)
In /var/log/syslog:
Oct 4 12:04:12 omega kernel: [ 121.633614] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
Oct 4 12:04:12 omega kernel: [ 121.654928] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
I can read the files on the disk.
When I try to create a new empty file in the root of disk:
root@omega:/mnt/lacie# touch test
touch: cannot touch ‘test’: Read-only file system
I have this error in /var/log/syslog:
Oct 4 12:08:19 omega kernel: [ 368.481482] EXT4-fs error (device sdc1): ext4_journal_check_start:56: Detected aborted journal
Oct 4 12:08:19 omega kernel: [ 368.481494] EXT4-fs (sdc1): Remounting filesystem read-only
Sometimes I have this error:
Oct 4 11:28:54 omega kernel: [11711.588781] EXT4-fs error (device sdc1): ext4_put_super:792: Couldn't clean up the journal
Oct 4 11:28:58 omega kernel: [11715.746328] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
After these errors, the filesystem is automatically remonted as read-only.
Therefore I'm not able at all to write on the disk.
Just for info, the output of e2fsck (nothing relevant for me):
root@omega:~# umount /mnt/lacie/
root@omega:~# e2fsck /dev/sdc1
e2fsck 1.42.12 (29-Aug-2014)
/dev/sdc1: recovering journal
/dev/sdc1 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sdc1: 444283/39075840 files (6.7% non-contiguous), 45617307/78142160 blocks
The output of dumpe2fs:
root@omega:~# dumpe2fs -h /dev/sdc1
dumpe2fs 1.42.12 (29-Aug-2014)
Filesystem volume name: <none>
Last mounted on: /mnt/lacie
Filesystem UUID: e739879e-05a9-4588-92c1-8c5811f510a3
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 39075840
Block count: 78142160
Reserved block count: 3907108
Free blocks: 32524853
Free inodes: 38631557
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 1005
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Thu Apr 12 22:20:33 2007
Last mount time: Sat Oct 4 12:26:00 2014
Last write time: Sat Oct 4 12:26:56 2014
Mount count: 0
Maximum mount count: -1
Last checked: Sat Oct 4 12:26:56 2014
Check interval: 15552000 (6 months)
Next check after: Thu Apr 2 12:26:56 2015
Lifetime writes: 291 GB
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: 2c8ade12-c8ec-4c9a-ab81-a6471f9bcb62
Journal backup: inode blocks
Journal features: journal_incompat_revoke
Journal size: 128M
Journal length: 32768
Journal sequence: 0x00029ca0
Journal start: 0
I have same problem with kernel in package linux-image-3.17-rc5-amd64.
Kernels in linux-image-3.14-2-amd64 or older works fine.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=28fbcb8c-10a9-49d8-a825-29842c8a1365 ro initrd=/install/initrd.gz quiet
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
[ 1.605631] Bluetooth: hci0: read Intel version: 370710018002030d37
[ 1.605634] Bluetooth: hci0: Intel device is already patched. patch num: 37
[ 1.605996] [drm] VBT doesn't support DRRS
[ 1.607260] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.608573] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[ 1.608620] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 1.608839] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 1.610035] alg: No test for crc32 (crc32-pclmul)
[ 1.612865] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 1.627654] systemd-journald[155]: Received request to flush runtime journal from PID 1
[ 1.643360] cfg80211: World regulatory domain updated:
[ 1.643364] cfg80211: DFS Master region: unset
[ 1.643365] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1.643367] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.643369] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.643371] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.643372] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.643374] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.643376] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1.654988] fbcon: inteldrmfb (fb0) is primary device
[ 1.656265] systemd-journald[155]: Received request to flush runtime journal from PID 1
[ 1.707909] random: nonblocking pool is initialized
[ 1.820014] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.840991] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 1.841206] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 1.853015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2.419263] psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 2.504883] Switched to clocksource tsc
[ 2.519048] psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
[ 2.624501] wlan0: authenticate with 00:24:d4:4e:e7:40
[ 2.627244] wlan0: send auth to 00:24:d4:4e:e7:40 (try 1/3)
[ 2.629692] wlan0: authenticated
[ 2.633656] wlan0: associate with 00:24:d4:4e:e7:40 (try 1/3)
[ 2.637848] wlan0: RX AssocResp from 00:24:d4:4e:e7:40 (capab=0x411 status=0 aid=1)
[ 2.638877] wlan0: associated
[ 2.638905] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2.773800] Console: switching to colour frame buffer device 240x67
[ 2.782130] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.782131] i915 0000:00:02.0: registered panic notifier
[ 2.836465] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.836888] Adding 4789244k swap on /dev/sdb5. Priority:-1 extents:1 across:4789244k SSFS
[ 2.839143] r8169 0000:03:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[ 2.851908] RPC: Registered named UNIX socket transport module.
[ 2.851911] RPC: Registered udp transport module.
[ 2.851912] RPC: Registered tcp transport module.
[ 2.851912] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.854546] FS-Cache: Loaded
[ 2.859487] FS-Cache: Netfs 'nfs' registered for caching
[ 2.865845] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.875291] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.875396] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 2.875827] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.876529] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[ 2.876794] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 2.876800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.878558] iTCO_vendor_support: vendor-support=0
[ 2.878952] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.878979] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 2.879074] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.881716] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input15
[ 2.882288] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[ 2.892067] r8169 0000:03:00.1 eth0: link down
[ 2.892130] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.896040] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.896041] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.896042] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.896042] sound hdaudioC1D0: mono: mono_out=0x0
[ 2.896043] sound hdaudioC1D0: inputs:
[ 2.896044] sound hdaudioC1D0: Mic=0x18
[ 2.896045] sound hdaudioC1D0: Internal Mic=0x12
[ 2.903789] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input18
[ 2.914199] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 2.914260] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 2.914413] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 2.914521] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 2.914640] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 3.055758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.055761] Bluetooth: BNEP filters: protocol multicast
[ 3.055768] Bluetooth: BNEP socket layer initialized
[ 3.942602] Bridge firewalling registered
[ 3.997669] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.023700] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.044920] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 22.926197] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 23.054523] usb 1-2: New USB device found, idVendor=059f, idProduct=0621
[ 23.054532] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 23.054537] usb 1-2: Product: LaCie HD Drive
[ 23.054541] usb 1-2: Manufacturer: LaCie
[ 23.054544] usb 1-2: SerialNumber: 10000E000D66CAD3
[ 23.101835] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 23.101952] scsi4 : usb-storage 1-2:1.0
[ 23.102159] usbcore: registered new interface driver usb-storage
[ 29.301553] scsi 4:0:0:0: Direct-Access SEAGATE ST3320820A 3.AA PQ: 0 ANSI: 2
[ 29.301892] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 29.302057] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 29.302369] sd 4:0:0:0: [sdc] Write Protect is off
[ 29.302372] sd 4:0:0:0: [sdc] Mode Sense: 53 00 00 08
[ 29.302690] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.322429] sdc: sdc1
[ 29.323459] sd 4:0:0:0: [sdc] Attached SCSI disk
** Model information
sys_vendor: Notebook
product_name: W840SU Series
product_version: Not Applicable
chassis_vendor: Notebook
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 4.6.5
board_vendor: Notebook
board_name: W840SU Series
board_version: Not Applicable
** Loaded modules:
usb_storage
xt_CHECKSUM
iptable_mangle
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
ipt_REJECT
xt_tcpudp
iptable_filter
ip_tables
x_tables
bridge
stp
llc
bnep
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
iTCO_wdt
iTCO_vendor_support
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ctr
ccm
arc4
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
ghash_clmulni_intel
iwlmvm
mac80211
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
joydev
ecb
pcspkr
btusb
psmouse
iwlwifi
evdev
bluetooth
serio_raw
6lowpan_iphc
cfg80211
rtsx_pci_ms
memstick
rfkill
i2c_i801
lpc_ich
wmi
snd_hda_intel
snd_hda_controller
tpm_infineon
tpm_tis
snd_hda_codec
tpm
snd_hwdep
snd_pcm_oss
i915
snd_mixer_oss
snd_pcm
snd_timer
snd
drm_kms_helper
video
i2c_designware_platform
ac
soundcore
i2c_designware_core
battery
drm
mei_me
mei
i2c_algo_bit
shpchp
processor
button
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
sg
usbhid
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
ehci_pci
ehci_hcd
xhci_hcd
crct10dif_pclmul
crct10dif_common
ahci
crc32c_intel
libahci
libata
rtsx_pci
mfd_core
scsi_mod
r8169
usbcore
mii
usb_common
thermal
thermal_sys
i2c_hid
hid
sdhci_acpi
i2c_core
sdhci
mmc_core
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
iface eth0 inet6 auto
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid photon
wpa-psk ************
bridge_hw 0c:8b:fd:82:cc:ab
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:90:f5:ee:84:67 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 0c:8b:fd:82:cc:ab brd ff:ff:ff:ff:ff:ff
inet 192.168.0.20/24 brd 192.168.0.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 2a01:e35:8b7d:9e10:e8b:fdff:fe82:ccab/64 scope global mngtmpaddr dynamic
valid_lft 86193sec preferred_lft 86193sec
inet6 fe80::e8b:fdff:fe82:ccab/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether d2:79:06:62:78:7d brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 2178012 1801 0 0 0 0 0 0 174174 1150 0 0 0 0 0 0
virbr0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 5402 37 0 0 0 0 0 0 5402 37 0 0 0 0 0 0
*** Protocol statistics:
Ip:
342 total packets received
0 forwarded
0 incoming packets discarded
340 incoming packets delivered
335 requests sent out
19 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
11 active connections openings
2 passive connection openings
4 failed connection attempts
0 connection resets received
1 connections established
1299 segments received
833 segments send out
1 segments retransmited
0 bad segments received.
7 resets sent
Udp:
354 packets received
0 packets to unknown port received.
0 packet receive errors
305 packets sent
UdpLite:
TcpExt:
3 TCP sockets finished time wait in fast timer
9 delayed acks sent
Quick ack mode was activated 1 times
1 packets directly queued to recvmsg prequeue.
1177 packet headers predicted
36 acknowledgments not containing data payload received
20 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
1 fast retransmits
1 DSACKs sent for old packets
1 connections reset due to unexpected data
TCPSackShiftFallback: 4
TCPRcvCoalesce: 2
TCPAutoCorking: 4
TCPOrigDataSent: 66
IpExt:
InNoRoutes: 2
InBcastPkts: 83
OutBcastPkts: 81
InOctets: 41687
OutOctets: 31037
InBcastOctets: 9446
OutBcastOctets: 8967
InNoECTPkts: 343
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 64
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 60
Region 0: Memory at f7e1d000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller [8086:9c43] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 56
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73)
Subsystem: Intel Corporation Wireless-N 7260 [8086:4062]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 62
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5287] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 58
Region 0: Memory at f7c15000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
03:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
Subsystem: CLEVO/KAPOK Computer Device [1558:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7c14000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 004: ID 059f:0621 LaCie, Ltd
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-11
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
--- End Message ---