[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#743230: marked as done (no sound from external speakers after upgrade (hda_intel driver))



Your message dated Wed, 28 Apr 2021 18:35:50 +0200
with message-id <E1lbn9v-001LQt-CC@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #743230,
regarding no sound from external speakers after upgrade (hda_intel driver)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
743230: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743230
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.13.7-1
Severity: important

Dear maintainer,

With the recent upgrade of the kernel, from 3.13.5-1 to 3.13.7-1, I do
no longer have sound coming out of my speakers. The following
suspicious message appears in logs:

> hda-intel 0000:00:07.0: spurious response 0x10de0002:0x3, last cmd=0x301f7a57

After downgrading to 3.13.5-1, sound comes back.

Note: this report was made from the system with the downgraded kernel.

Cheers,

-- 
Stéphane

-- Package-specific info:
** Version:
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=9b660451-e21f-478e-921c-379c60c97119 ro init=/bin/systemd ip=dhcp ISCSI_INITIATOR=iqn.1993-08.org.debian:01:b750d1c841dd ISCSI_TARGET_NAME=iqn.2013-03.fr.up7:korell ISCSI_TARGET_IP=10.125.1.1 ISCSI_TARGET_PORT=3260 ISCSI_USERNAME=korell ISCSI_PASSWORD=xedex2XaINga

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[   13.853103] MCE: In-kernel MCE decoding enabled.
[   13.913470] AMD64 EDAC driver v3.4.0
[   13.913553] EDAC amd64: DRAM ECC disabled.
[   13.913606] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   13.913606]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   13.913606]  (Note that use of the override may cause unknown side effects.)
[   13.973703] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.032552] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[   14.032633] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[   14.032850] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input4
[   14.047112] acpi-cpufreq: overriding BIOS provided _PSD data
[   14.050234] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   14.050285] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \SM01 1 (20131115/utaddress-251)
[   14.050401] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \SM00 2 (20131115/utaddress-251)
[   14.050514] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.051174] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   14.052897] wmi: Mapper loaded
[   14.065662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.077266] media: Linux media interface: v0.10
[   14.120513] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   14.159457] Linux video capture interface: v2.00
[   14.387265] parport_pc 00:08: reported by Plug and Play ACPI
[   14.388671] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   14.605939] kvm: Nested Virtualization enabled
[   14.605990] kvm: Nested Paging enabled
[   14.792510] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   14.792990] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   14.793064] saa7133[0]: found at 0000:01:0a.0, rev: 208, irq: 18, latency: 84, mmio: 0xfdefe000
[   14.793130] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[   14.793212] saa7133[0]: board init: gpio is 200e000
[   14.807028] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   14.807086] hda_intel: Disabling MSI
[   14.943258] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   14.943788] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[   14.944303] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
[   14.944822] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 76 03 22 cd d3
[   14.945348] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.945867] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.946385] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.946898] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.947430] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.947944] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.948456] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.948968] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.949480] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.949997] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.950508] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.951019] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.191329] tuner 1-004b: Tuner -1 found with type(s) Radio TV.
[   15.275440] tda829x 1-004b: setting tuner address to 61
[   15.355530] Adding 8388604k swap on /dev/sde1.  Priority:-1 extents:1 across:8388604k 
[   15.531477] tda829x 1-004b: type set to tda8290+75a
[   15.644515] nvidia: module license 'NVIDIA' taints kernel.
[   15.644568] Disabling lock debugging due to kernel taint
[   15.664370] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
[   15.664429] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   15.664633] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.117  Tue Nov 26 21:25:36 PST 2013
[   15.930011] EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
[   17.668435] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[   17.668625] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[   17.668790] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[   17.668949] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[   17.669105] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[   17.669262] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[   17.669436] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
[   17.669592] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
[   19.276940] Registered IR keymap rc-pinnacle-color
[   19.277130] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input14
[   19.277249] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0
[   19.277293] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-1/1-0047/ir0 [saa7133[0]]
[   19.349051] saa7133[0]: registered device video0 [v4l2]
[   19.349158] saa7133[0]: registered device vbi0
[   19.349249] saa7133[0]: registered device radio0
[   19.383670] saa7134 ALSA driver for DMA sound loaded
[   19.383756] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 18 registered as card -1
[   22.124681] iscsi: registered transport (iser)
[   26.726563] RPC: Registered named UNIX socket transport module.
[   26.726616] RPC: Registered udp transport module.
[   26.726658] RPC: Registered tcp transport module.
[   26.726701] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   26.747340] FS-Cache: Loaded
[   26.807524] FS-Cache: Netfs 'nfs' registered for caching
[   26.937395] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   27.076527] NET: Registered protocol family 15
[   27.211930] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[   27.323546] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[   27.480032] AVX instructions are not detected.
[   27.597021] AVX instructions are not detected.
[   27.613535] AVX instructions are not detected.
[   27.719548] AVX or AES-NI instructions are not detected.
[   27.737386] AVX or AES-NI instructions are not detected.
[   27.814131] AVX instructions are not detected.
[   31.331234] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[   41.049849] sda1: WRITE SAME failed. Manually zeroing.
[   41.123188] type=1006 audit(1396285335.854:2): pid=1847 uid=0 old auid=4294967295 new auid=104 old ses=4294967295 new ses=1 res=1
[   62.115502] type=1006 audit(1396285356.186:3): pid=2561 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[   65.728929] hda-intel 0000:00:07.0: spurious response 0x0:0x0, last cmd=0xa70d00
[  308.427762] EXT4-fs (sda1): error count: 2
[  308.427772] EXT4-fs (sda1): initial error at 1363775322: ext4_find_entry:935: inode 693297
[  308.427777] EXT4-fs (sda1): last error at 1363775594: ext4_remount:4541: inode 693297

** Model information
sys_vendor: Shuttle Inc
product_name: SN78S
product_version: V10
chassis_vendor: Shuttle Inc
chassis_version: H7
bios_vendor: Phoenix Technologies, LTD
bios_version: 6.00 PG
board_vendor: Shuttle Inc
board_name: FN78S
board_version: V10

** Loaded modules:
nfsv3
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
binfmt_misc
uinput
deflate
ctr
twofish_generic
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia_generic
camellia_x86_64
serpent_sse2_x86_64
xts
serpent_generic
lrw
gf128mul
glue_helper
blowfish_generic
blowfish_x86_64
blowfish_common
cast5_generic
cast_common
ablk_helper
cryptd
des_generic
cbc
cmac
xcbc
rmd160
sha512_generic
sha256_generic
hmac
crypto_null
af_key
xfrm_algo
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ib_iser
rdma_cm
ib_addr
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
saa7134_alsa
rc_pinnacle_color
ir_kbd_i2c
snd_hda_codec_hdmi
snd_hda_codec_realtek
nvidia(PO)
tda827x
tda8290
tuner
snd_hda_intel
saa7134
snd_hda_codec
snd_hwdep
tveeprom
videobuf_dma_sg
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
kvm_amd
mxm_wmi
videobuf_core
kvm
parport_pc
snd_seq_midi
snd_seq_midi_event
rc_core
v4l2_common
videodev
snd_rawmidi
pcspkr
media
snd_seq
parport
shpchp
wmi
k10temp
i2c_nforce2
acpi_cpufreq
i2c_core
video
processor
evdev
snd_seq_device
snd_timer
edac_mce_amd
snd
edac_core
soundcore
button
fuse
autofs4
ext4
crc16
mbcache
jbd2
btrfs
xor
raid6_pq
libcrc32c
dm_mod
md_mod
sd_mod
crct10dif_generic
crc_t10dif
crct10dif_common
crc32c
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
hid_generic
usbhid
hid
sg
sr_mod
cdrom
ata_generic
floppy
firewire_ohci
xhci_hcd
firewire_core
forcedeth
crc_itu_t
thermal
fan
thermal_sys
ahci
libahci
pata_amd
libata
ohci_pci
ohci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common

** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
	Subsystem: NVIDIA Corporation Device [10de:cb84]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at fc00 [size=64]
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 1c40 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
	Subsystem: NVIDIA Corporation Device [10de:cb84]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 5
	Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fde00000-fdefffff
	Prefetchable memory behind bridge: fdd00000-fddfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 40
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at dc00 [size=16]
	Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at d800 [size=8]
	Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fb000000-fcffffff
	Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fda00000-fdafffff
	Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:08.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3139]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

01:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d0)
	Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133) [11bd:002e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 84 (21000ns min, 8000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: saa7134

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: NVIDIA Corporation Device [10de:cb84]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at e6000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at bc00 [size=128]
	[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

03:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fdcfe000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd


** USB devices:
Bus 004 Device 002: ID 2109:0810  
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 046d:c06a Logitech, Inc. USB Optical Mouse
Bus 002 Device 002: ID 2109:3431  
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.13-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    16-2
ii  linux-base                              3.5
ii  module-init-tools                       16-2

Versions of packages linux-image-3.13-1-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.13-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
ii  linux-doc-3.13          3.13.7-1

Versions of packages linux-image-3.13-1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.13-1-amd64/prerm/removing-running-kernel-3.13-1-amd64: true
  linux-image-3.13-1-amd64/postinst/depmod-error-initrd-3.13-1-amd64: false

--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: