[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#719847: marked as done (linux-image-3.10-2-amd64: hang and timout populating /dev no console after boot)



Your message dated Wed, 28 Apr 2021 18:17:00 +0200
with message-id <E1lbmrg-001LLr-Lv@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #719847,
regarding linux-image-3.10-2-amd64: hang and timout populating /dev no console after boot
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
719847: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=719847
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.10.5-1
Severity: important

Dear Maintainer,

     System fails to boot cleanly.  It hangs while populating /dev and then kicks out a bunch of modprobe hung errors.  It eventually comes up sorta. but I have no console or keyboard.  I can ssh into the system and that is how I'm generating this report.  This is an update/upgrade from wheezy.  I had the same problem with the linux-image-3.9-1-amd64kernel, but had other priorities and didn't have time to work on it then.  The linux-image-3.2.0-4-amd64 kernel worked fine and still will load and run fine using the jessie libs etc.  I'll try building a custom kernel and see what that leads to.

pete

-- Package-specific info:
** Version:
Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=3e23aeb5-68a5-49d1-a5db-ab53b5b3157b ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[  480.432548]  [<ffffffff8111212a>] ? __inode_permission+0x57/0x95
[  480.432551]  [<ffffffff811148cc>] ? path_openat+0xc2/0x327
[  480.432555]  [<ffffffff81114dd4>] ? do_filp_open+0x2a/0x6e
[  480.432560]  [<ffffffff810fa39f>] ? kmem_cache_alloc+0x8c/0xfd
[  480.432564]  [<ffffffff8111dc59>] ? __alloc_fd+0xcc/0xdb
[  480.432568]  [<ffffffff81108a24>] ? do_sys_open+0x5c/0xe0
[  480.432572]  [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[  600.432038] INFO: task modprobe:516 blocked for more than 120 seconds.
[  600.432044] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.432046] modprobe        D ffff8802bfd94040     0   516    431 0x00000004
[  600.432052]  ffff8802b1070080 0000000000000086 ffff8802b45920c0 0000000000014040
[  600.432056]  ffff8802b1061fd8 ffff8802b1061fd8 ffff8802b1070080 ffff8802b0d9c400
[  600.432060]  0000000000000000 0000000000000000 ffff8802b0d9c790 0000000000000000
[  600.432064] Call Trace:
[  600.432083]  [<ffffffffa01da2c7>] ? i801_transaction+0xa4/0xe9 [i2c_i801]
[  600.432090]  [<ffffffff81057c48>] ? abort_exclusive_wait+0x79/0x79
[  600.432094]  [<ffffffffa01dae08>] ? i801_access+0x7a6/0x888 [i2c_i801]
[  600.432100]  [<ffffffff8113aeeb>] ? ep_poll_callback+0xe8/0x101
[  600.432104]  [<ffffffff8105d056>] ? __wake_up_common+0x3f/0x71
[  600.432113]  [<ffffffffa01cecb0>] ? i2c_smbus_xfer+0xc3/0x11d [i2c_core]
[  600.432118]  [<ffffffffa01d0069>] ? i2c_do_del_adapter+0x8/0x8f [i2c_core]
[  600.432124]  [<ffffffffa01cfdaf>] ? i2c_default_probe+0x93/0xf5 [i2c_core]
[  600.432129]  [<ffffffffa01d0069>] ? i2c_do_del_adapter+0x8/0x8f [i2c_core]
[  600.432135]  [<ffffffffa01cfebe>] ? i2c_do_add_adapter+0xad/0x22b [i2c_core]
[  600.432140]  [<ffffffff811c3bf2>] ? kobject_uevent_env+0x3de/0x420
[  600.432146]  [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[  600.432151]  [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[  600.432156]  [<ffffffff8127699f>] ? bus_for_each_dev+0x4b/0x7c
[  600.432161]  [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[  600.432167]  [<ffffffffa01ce37c>] ? i2c_for_each_dev+0x29/0x3f [i2c_core]
[  600.432172]  [<ffffffffa01cf260>] ? i2c_register_driver+0x7a/0x9f [i2c_core]
[  600.432182]  [<ffffffffa010d000>] ? 0xffffffffa010cfff
[  600.432186]  [<ffffffffa010d000>] ? 0xffffffffa010cfff
[  600.432190]  [<ffffffff8100209e>] ? do_one_initcall+0x74/0x106
[  600.432195]  [<ffffffffa010d000>] ? 0xffffffffa010cfff
[  600.432200]  [<ffffffff81082b8b>] ? load_module+0x1b16/0x1e16
[  600.432204]  [<ffffffff8107f78e>] ? free_notes_attrs+0x3c/0x3c
[  600.432209]  [<ffffffff81082f29>] ? SyS_init_module+0x9e/0xab
[  600.432214]  [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[  600.432220] INFO: task modprobe:601 blocked for more than 120 seconds.
[  600.432222] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.432224] modprobe        D ffff8802bfc94040     0   601    412 0x00000006
[  600.432228]  ffff8802b3dbe040 0000000000000082 ffff8802b44b4780 0000000000014040
[  600.432231]  ffff8802b2ec5fd8 ffff8802b2ec5fd8 ffff8802b3dbe040 ffffffffa01d20e0
[  600.432235]  ffff8802b3dbe040 ffffffffa01d20e4 0000000000000002 0000000000000000
[  600.432239] Call Trace:
[  600.432246]  [<ffffffff81387996>] ? schedule_preempt_disabled+0x5/0x6
[  600.432250]  [<ffffffff81386a60>] ? __mutex_lock_common.isra.8+0x1a3/0x1bf
[  600.432257]  [<ffffffffa01cfa50>] ? i2c_register_adapter+0x285/0x285 [i2c_core]
[  600.432260]  [<ffffffff81386834>] ? mutex_lock+0x17/0x27
[  600.432266]  [<ffffffffa01cfa61>] ? i2c_add_adapter+0x11/0x59 [i2c_core]
[  600.432271]  [<ffffffffa01e06aa>] ? __i2c_bit_add_bus+0x33/0x284 [i2c_algo_bit]
[  600.432311]  [<ffffffffa035f26f>] ? radeon_i2c_create+0x1b8/0x1ea [radeon]
[  600.432338]  [<ffffffffa034930a>] ? radeon_combios_i2c_init+0x5b/0x227 [radeon]
[  600.432368]  [<ffffffffa035cfe0>] ? radeon_modeset_init+0x8da/0x916 [radeon]
[  600.432392]  [<ffffffffa0340965>] ? radeon_debugfs_add_files+0xc2/0xc9 [radeon]
[  600.432417]  [<ffffffffa0341754>] ? radeon_driver_load_kms+0xb1/0xf5 [radeon]
[  600.432429]  [<ffffffffa02ecee2>] ? drm_get_pci_dev+0x152/0x259 [drm]
[  600.432451]  [<ffffffffa033f0f0>] ? radeon_pci_probe+0xd4/0xf6 [radeon]
[  600.432475]  [<ffffffffa033f102>] ? radeon_pci_probe+0xe6/0xf6 [radeon]
[  600.432480]  [<ffffffff811e049d>] ? local_pci_probe+0x33/0x58
[  600.432484]  [<ffffffff812781a9>] ? driver_probe_device+0x1b3/0x1b3
[  600.432488]  [<ffffffff811e057c>] ? pci_device_probe+0xba/0xde
[  600.432492]  [<ffffffff81278088>] ? driver_probe_device+0x92/0x1b3
[  600.432496]  [<ffffffff812781fc>] ? __driver_attach+0x53/0x73
[  600.432499]  [<ffffffff8127699f>] ? bus_for_each_dev+0x4b/0x7c
[  600.432503]  [<ffffffff812778c1>] ? bus_add_driver+0xd5/0x1f4
[  600.432507]  [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[  600.432511]  [<ffffffff81278722>] ? driver_register+0x87/0xfe
[  600.432515]  [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[  600.432519]  [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[  600.432522]  [<ffffffff8100209e>] ? do_one_initcall+0x74/0x106
[  600.432526]  [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[  600.432530]  [<ffffffff81082b8b>] ? load_module+0x1b16/0x1e16
[  600.432533]  [<ffffffff8107f78e>] ? free_notes_attrs+0x3c/0x3c
[  600.432538]  [<ffffffff81082f29>] ? SyS_init_module+0x9e/0xab
[  600.432542]  [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[  600.432554] INFO: task Xorg:4126 blocked for more than 120 seconds.
[  600.432555] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.432557] Xorg            D ffff8802bfd94040     0  4126   4055 0x00400000
[  600.432561]  ffff8802b3108880 0000000000000086 ffff8802b44b67c0 0000000000014040
[  600.432565]  ffff8802b38a3fd8 ffff8802b38a3fd8 ffff8802b3108880 ffffffffa030f000
[  600.432568]  ffff8802b3108880 ffffffffa030f004 0000000000000002 0000000000000000
[  600.432572] Call Trace:
[  600.432577]  [<ffffffff81387996>] ? schedule_preempt_disabled+0x5/0x6
[  600.432581]  [<ffffffff81386a60>] ? __mutex_lock_common.isra.8+0x1a3/0x1bf
[  600.432585]  [<ffffffff81386834>] ? mutex_lock+0x17/0x27
[  600.432593]  [<ffffffffa02e76e1>] ? drm_stub_open+0x42/0x122 [drm]
[  600.432597]  [<ffffffff8110ccf7>] ? chrdev_open+0x11c/0x140
[  600.432600]  [<ffffffff8110cbdb>] ? cdev_put+0x19/0x19
[  600.432605]  [<ffffffff811080e6>] ? do_dentry_open+0x16d/0x20f
[  600.432608]  [<ffffffff811081b2>] ? finish_open+0x2a/0x33
[  600.432612]  [<ffffffff81114662>] ? do_last+0x864/0xa0c
[  600.432616]  [<ffffffff8111212a>] ? __inode_permission+0x57/0x95
[  600.432619]  [<ffffffff811148cc>] ? path_openat+0xc2/0x327
[  600.432623]  [<ffffffff81114dd4>] ? do_filp_open+0x2a/0x6e
[  600.432628]  [<ffffffff810fa39f>] ? kmem_cache_alloc+0x8c/0xfd
[  600.432632]  [<ffffffff8111dc59>] ? __alloc_fd+0xcc/0xdb
[  600.432635]  [<ffffffff81108a24>] ? do_sys_open+0x5c/0xe0
[  600.432639]  [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b

** Model information
sys_vendor: IBM
product_name: IBM System x3650 -[7979AC1]-
product_version: 
chassis_vendor: IBM
chassis_version: 
bios_vendor: IBM
bios_version: -[GGE138AUS-1.10]-
board_vendor: IBM
board_name: System Planar
board_version: 

** Loaded modules:
bnep
rfcomm
bluetooth
rfkill
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
radeon
ttm
drm_kms_helper
i5000_edac
iTCO_wdt
iTCO_vendor_support
drm
lpc_ich
coretemp
edac_core
kvm_intel
mfd_core
i5k_amb
ics932s401
acpi_cpufreq
kvm
joydev
i2c_algo_bit
mperf
i2c_i801
psmouse
evdev
processor
ioatdma
pcspkr
serio_raw
i2c_core
shpchp
thermal_sys
rng_core
microcode
dca
button
ext4
crc16
jbd2
mbcache
sg
ses
enclosure
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
hid_generic
usbhid
hid
aacraid
ata_piix
bnx2
ehci_pci
uhci_hcd
ehci_hcd
libata
scsi_mod
usbcore
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth2
iface eth2 inet static
	address 192.168.10.242
	netmask 255.255.255.0
	network 192.168.10.0
	broadcast 192.168.10.255
	gateway 192.168.10.113
	# dns-* options are implemented by the resolvconf package, if installed
	dns-nameservers 192.168.10.150 192.168.10.113
	dns-search 

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:1a:64:c5:eb:c4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.242/24 brd 192.168.10.255 scope global eth2
       valid_lft forever preferred_lft forever
    inet6 fe80::21a:64ff:fec5:ebc4/64 scope link 
       valid_lft forever preferred_lft forever
3: eth5: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 00:1a:64:c5:eb:c6 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth2:  883461    4700    0    0    0     0          0         2   826002    4733    0    0    0     0       0          0
  eth5:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo:     960      16    0    0    0     0          0         0      960      16    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    4735 total packets received
    0 forwarded
    0 incoming packets discarded
    4735 incoming packets delivered
    4704 requests sent out
Icmp:
    6 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        echo requests: 6
    6 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        echo replies: 6
IcmpMsg:
        InType8: 6
        OutType0: 6
Tcp:
    16 active connections openings
    2 passive connection openings
    8 failed connection attempts
    0 connection resets received
    2 connections established
    4646 segments received
    4633 segments send out
    0 segments retransmited
    0 bad segments received.
    8 resets sent
Udp:
    135 packets received
    0 packets to unknown port received.
    0 packet receive errors
    72 packets sent
UdpLite:
TcpExt:
    6 TCP sockets finished time wait in fast timer
    14 delayed acks sent
    352 packet headers predicted
    60 acknowledgments not containing data payload received
    2572 predicted acknowledgments
    TCPOFOQueue: 1
IpExt:
    InMcastPkts: 14
    OutMcastPkts: 14
    InBcastPkts: 46
    OutBcastPkts: 38
    InOctets: 805680
    OutOctets: 736911
    InMcastOctets: 3131
    OutMcastOctets: 3003
    InBcastOctets: 6674
    OutBcastOctets: 4782


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev b1)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Capabilities: <access denied>

00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=1a, subordinate=25, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: c8000000-c9ffffff
	Prefetchable memory behind bridge: 00000000c7f00000-00000000c7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
	I/O behind bridge: 00006000-0000ffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=45, subordinate=45, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev b1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=44, subordinate=44, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev b1)
	Subsystem: IBM Device [1014:02dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ioatdma

00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
	Subsystem: IBM Device [1014:02dd]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: i5000_edac

00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev b1)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev b1)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev b1)
	Subsystem: IBM Device [1014:02dd]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev b1)
	Subsystem: IBM Device [1014:02dd]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	Memory behind bridge: cd000000-cfffffff
	Prefetchable memory behind bridge: 0000000f40200000-0000000f403fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: ca000000-ccffffff
	Prefetchable memory behind bridge: 0000000f40000000-0000000f401fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 2200 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 4: I/O ports at 2600 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 23
	Region 4: I/O ports at 2a00 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 22
	Region 4: I/O ports at 2e00 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: de000000-dfffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000ddffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller [8086:2680] (rev 09) (prog-if 80 [Master])
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 0480 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09)
	Subsystem: IBM Device [1014:02dd]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at 0440 [size=32]
	Kernel driver in use: i801_smbus

01:06.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: IBM Device [1014:0305]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 4000 [size=256]
	Region 2: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: cd000000-cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
	Subsystem: IBM Device [1014:0342]
	Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at ce000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2

04:00.0 RAID bus controller [0104]: Adaptec AAC-RAID (Rocket) [9005:0286] (rev 02)
	Subsystem: IBM ServeRAID 8k/8k-l8 [1014:9580]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at c9e00000 (64-bit, non-prefetchable) [size=2M]
	Region 2: Memory at c7fe0000 (64-bit, prefetchable) [size=128K]
	Region 4: I/O ports at 5000 [size=256]
	[virtual] Expansion ROM at c7f00000 [disabled] [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: aacraid

05:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
	Memory behind bridge: ca000000-ccffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
	Subsystem: IBM Device [1014:0342]
	Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at ca000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2

1a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=1a, secondary=1b, subordinate=24, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

1a:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=1a, secondary=25, subordinate=25, sec-latency=64
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

1b:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=1b, secondary=1c, subordinate=1c, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

1b:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=1b, secondary=24, subordinate=24, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport


** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04b3:4001 IBM Corp. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 1c4f:0003 SiGma Micro HID controller
Bus 001 Device 002: ID 0e8f:0022 GreenAsia Inc. 
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.10-2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.50
ii  initramfs-tools [linux-initramfs-tool]  0.113
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.10-2-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.10-2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u1
pn  linux-doc-3.10          <none>

Versions of packages linux-image-3.10-2-amd64 is related to:
pn  firmware-atheros        <none>
ii  firmware-bnx2           0.39
ii  firmware-bnx2x          0.39
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.39
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.10-2-amd64/prerm/removing-running-kernel-3.10-2-amd64: true
  linux-image-3.10-2-amd64/postinst/missing-firmware-3.10-2-amd64:
  linux-image-3.10-2-amd64/postinst/ignoring-ramdisk:
  linux-image-3.10-2-amd64/postinst/depmod-error-initrd-3.10-2-amd64: false

--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: