[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#770397: marked as done (linux-image-3.16.0-4-amd64: suspend drains the battery as if it's not)



Your message dated Wed, 28 Apr 2021 18:05:12 +0200
with message-id <E1lbmgH-001LIS-8l@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #770397,
regarding linux-image-3.16.0-4-amd64: suspend drains the battery as if it's not
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
770397: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.7-2
Severity: important

Hi,

Since I upgraded to vesion 3.16 I have this issue. The issue Happens with
linux-image-3.16-2-amd64 and linux-image-3.16-3-amd64 as well. However linux-
image-3.14-2-amd64 works fine.

When I suspend the computer (closing the lid or calling pm-suspend), everything
looks like it's working fine. Especially if I reopen the lid after a small
time, it correctly wakes up from suspend.

Yet it has the following issues:

Issue 1:
Sometimes, when I try to wake it up, it just doesn't. The blinking led is still
blinking, but I can't wake it up. Pressing the power button doesn't work. I
need to longpress the power button to force stop the computer, and start it
again.
I _think_ it happens if I leave the computer in suspend mode for a longer time.

Issue 2:
If I leave the computer for a longer time, for example during a full night, it
doesn't have any battery left.

syslog does not have much information: the suspend option, and then:

^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@Nov
20 08:42:41 beitou rsyslogd: [origin software="rsyslogd" swVersion="8.4.2"
x-pid="2049" x-info="http://www.rsyslog.com"] start

(so some funny characters + the first line of the boot)


I know other bugs look similar but I prefered to file a separate bug.


The computer is a Thinkpad Yoga (_not_ a Yoga 2 or Yoga 2 Pro). Tell me if you
need any other information.

--
Julien



-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=fa8c3205-5f2a-43f3-8c6d-ae8b72299a95 ro init=/bin/systemd quiet init=/bin/systemd

** Not tainted

** Kernel log:
[    2.125129] usbcore: registered new interface driver uvcvideo
[    2.125129] USB Video Class driver (1.1.1)
[    2.130415] usbcore: registered new interface driver btusb
[    2.147089] Bluetooth: hci0: read Intel version: 370710018002030d37
[    2.147090] Bluetooth: hci0: Intel device is already patched. patch num: 37
[    2.157731] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.195863] systemd-journald[163]: Received request to flush runtime journal from PID 1
[    2.248657] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2911, fw id: 1514409
[    2.248665] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.290191] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
[    2.290193] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.290580] hub 3-1:1.0: USB hub found
[    2.290635] hub 3-1:1.0: 8 ports detected
[    2.307549] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    2.562220] usb 3-1.7: new full-speed USB device number 3 using ehci-pci
[    2.656547] usb 3-1.7: New USB device found, idVendor=0483, idProduct=91d1
[    2.656548] usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.656549] usb 3-1.7: Product: ST_SENSOR_HUB
[    2.656550] usb 3-1.7: Manufacturer: STMicroelectronics
[    2.656550] usb 3-1.7: SerialNumber: ST_SENSOR_HUB
[    2.682095] Console: switching to colour frame buffer device 240x67
[    2.687514] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.687515] i915 0000:00:02.0: registered panic notifier
[    2.687521] Switched to clocksource tsc
[    2.703839] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.703934] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    2.704015] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.704370] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    2.704375] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.710058] snd_hda_intel 0000:00:03.0: irq 75 for MSI/MSI-X
[    2.724773] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    2.724845] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.724901] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.734117] usb 3-1.8: new full-speed USB device number 4 using ehci-pci
[    2.798200] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.828312] usb 3-1.8: New USB device found, idVendor=056a, idProduct=00ec
[    2.828315] usb 3-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.828316] usb 3-1.8: Product: ISD-V4
[    2.828317] usb 3-1.8: Manufacturer: Tablet
[    2.834003] input: Wacom ISDv4 EC Pen as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/input/input19
[    2.834092] usbcore: registered new interface driver wacom
[    2.845127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.845130] Bluetooth: BNEP filters: protocol multicast
[    2.845139] Bluetooth: BNEP socket layer initialized
[    3.078867] scsi 4:0:0:0: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.079061] scsi 4:0:0:1: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.079236] scsi 4:0:0:2: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.079594] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.079756] sd 4:0:0:1: Attached scsi generic sg2 type 0
[    3.079914] sd 4:0:0:2: Attached scsi generic sg3 type 0
[    3.081658] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    3.081918] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    3.083735] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.340762] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[    3.340995] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[    3.354312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.751743] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    6.932827] wlan0: authenticate with 5c:33:8e:cd:11:38
[    6.935830] wlan0: send auth to 5c:33:8e:cd:11:38 (try 1/3)
[    6.951905] wlan0: authenticated
[    6.953495] wlan0: associate with 5c:33:8e:cd:11:38 (try 1/3)
[    6.957411] wlan0: RX AssocResp from 5c:33:8e:cd:11:38 (capab=0x431 status=0 aid=1)
[    6.959061] wlan0: associated
[    6.959105] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    6.959153] cfg80211: Calling CRDA for country: FR
[    6.976669] cfg80211: Regulatory domain changed to country: FR
[    6.976672] cfg80211:  DFS Master region: ETSI
[    6.976673] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.976674] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.976676] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.976677] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[    6.976678] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[    6.976679] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    8.675956] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    9.000131] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[   30.319229] qmi_wwan 1-2:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:14.0-2, WWAN/QMI device
[   30.448711] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[   30.448746] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[   30.448754] usb 1-2: hub failed to enable device, error -22
[   30.560552] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[   30.560617] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[   30.560621] usb 1-2: hub failed to enable device, error -22
[   30.672658] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[   30.689479] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880216290388
[   30.689483] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880216290340
[   30.689485] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802142d8e08
[   30.689487] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802142d8dc0
[   30.689489] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664f90
[   30.689491] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664f48
[   30.689493] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664e90
[   30.689494] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664f00
[   30.689496] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664d90
[   30.689498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664e48
[   30.689500] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880216290088
[   30.689501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664e00
[   30.689503] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664d48
[   30.689505] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d1664d00
[   30.689506] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880216290040
[   30.691344] qmi_wwan 1-2:1.4: cdc-wdm0: USB WDM device
[   30.691527] qmi_wwan 1-2:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2, WWAN/QMI device, be:8c:d0:1c:3a:92

** Model information
sys_vendor: LENOVO
product_name: 20CDCTO1WW
product_version: ThinkPad S1 Yoga
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: GQET34WW (1.14 )
board_vendor: LENOVO
board_name: 20CDCTO1WW
board_version: SDK0E50510 Pro

** Loaded modules:
ctr
ccm
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
bnep
wacom
snd_hda_codec_hdmi
hid_sensor_incl_3d
hid_sensor_rotation
hid_sensor_als
hid_sensor_accel_3d
hid_sensor_gyro_3d
hid_sensor_magn_3d
hid_sensor_trigger
industrialio_triggered_buffer
kfifo_buf
hid_sensor_iio_common
industrialio
hid_sensor_hub
ecb
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
joydev
v4l2_common
videodev
media
hid_multitouch
qmi_wwan
btusb
cdc_wdm
usbhid
usbnet
mii
hid
bluetooth
usb_storage
6lowpan_iphc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
arc4
iTCO_wdt
iTCO_vendor_support
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
efi_pstore
ablk_helper
cryptd
pcspkr
evdev
iwlmvm
psmouse
efivars
serio_raw
mac80211
i2c_i801
rtsx_pci_ms
memstick
iwlwifi
snd_hda_codec_conexant
snd_hda_codec_generic
thinkpad_acpi
i915
ac
battery
nvram
cfg80211
tpm_tis
snd_hda_intel
rfkill
tpm
snd_hda_controller
video
drm_kms_helper
snd_hda_codec
wmi
intel_smartconnect
snd_hwdep
drm
button
snd_pcm
lpc_ich
snd_timer
i2c_algo_bit
i2c_core
shpchp
snd
soundcore
processor
mei_me
mei
fuse
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
mmc_core
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
libahci
ehci_pci
libata
xhci_hcd
ehci_hcd
scsi_mod
usbcore
rtsx_pci
mfd_core
thermal
usb_common
thermal_sys

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether ac:7b:a1:4c:e8:07 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.12/24 brd 192.168.1.255 scope global dynamic wlan0
       valid_lft 86144sec preferred_lft 86144sec
    inet6 fe80::ae7b:a1ff:fe4c:e807/64 scope link
       valid_lft forever preferred_lft forever
4: wwan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 76:d3:81:64:70:01 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
 wlan0: 2527185    2095    0    0    0     0          0         0   208260    1423    0    0    0     0       0          0
 wwan0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo:    8049     110    0    0    0     0          0         0     8049     110    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    1984 total packets received
    1 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    1981 incoming packets delivered
    1504 requests sent out
    586 dropped because of missing route
    3 reassemblies required
    1 packets reassembled ok
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    26 active connections openings
    0 passive connection openings
    6 failed connection attempts
    2 connection resets received
    1 connections established
    1654 segments received
    1199 segments send out
    0 segments retransmited
    0 bad segments received.
    9 resets sent
Udp:
    361 packets received
    0 packets to unknown port received.
    0 packet receive errors
    304 packets sent
UdpLite:
TcpExt:
    14 TCP sockets finished time wait in fast timer
    18 delayed acks sent
    1256 packet headers predicted
    50 acknowledgments not containing data payload received
    19 predicted acknowledgments
    2 connections reset due to early user close
    TCPRcvCoalesce: 116
    TCPOFOQueue: 115
    TCPAutoCorking: 2
    TCPOrigDataSent: 139
IpExt:
    InMcastPkts: 31
    OutMcastPkts: 23
    InBcastPkts: 44
    OutBcastPkts: 30
    InOctets: 2498859
    OutOctets: 163908
    InMcastOctets: 3499
    OutMcastOctets: 3158
    InBcastOctets: 5967
    OutBcastOctets: 3475
    InNoECTPkts: 2118


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 62
    Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 3000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915

00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 75
    Region 0: Memory at f0610000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI])
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 57
    Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 59
    Region 0: Memory at f0619000 (64-bit, non-prefetchable) [size=32]
    Capabilities: <access denied>
    Kernel driver in use: mei_me

00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 60
    Region 0: Memory at f0614000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Memory behind bridge: f0500000-f05fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Memory behind bridge: f0400000-f04fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at f061d000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 58
    Region 0: I/O ports at 3088 [size=8]
    Region 1: I/O ports at 3094 [size=4]
    Region 2: I/O ports at 3080 [size=8]
    Region 3: I/O ports at 3090 [size=4]
    Region 4: I/O ports at 3060 [size=32]
    Region 5: Memory at f061c000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22] (rev 04)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f0618000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at efa0 [size=32]

04:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2] (rev 83)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4270]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 61
    Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi

05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
    Subsystem: Lenovo Device [17aa:2217]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 56
    Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: rtsx_pci


** USB devices:
Bus 003 Device 004: ID 056a:00ec Wacom Co., Ltd
Bus 003 Device 003: ID 0483:91d1 STMicroelectronics
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 04f2:b39f Chicony Electronics Co., Ltd
Bus 001 Device 004: ID 04f3:0254 Elan Microelectronics Corp.
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 05c6:9025 Qualcomm, Inc. Qualcomm HSUSB Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.116
ii  kmod                                    18-3
ii  linux-base                              3.5
ii  module-init-tools                       18-3

Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi                2.02~beta2-15
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.43
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
  linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
  linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:


--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: