--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-3.16.0-4-amd64: poor performance with free b43 module and BCM4313 (14e4:4727)
- From: gael.marloie@vivaldi.net
- Date: Fri, 14 Nov 2014 17:03:46 +0100
- Message-id: <20141114160346.GA14461@mraw.org>
Subject: linux-image-3.16.0-4-amd64: poor performance with free b43 module
Package: src:linux
Version: 3.16.7-2
Severity: important
X-debbugs-cc: gael.marloie@vivaldi.net, kibi@debian.org
Hi,
using the b43 module with this wireless NIC, I'm only getting
rate-limiting to 100KB/s, sometimes 500KB/s; while switching to
broadcom-sta-dkms (plus the modprobe -r/modprobe dance) leads to >3MB/s.
http://wireless.kernel.org/en/users/Drivers/b43 seems to list this
device as not supported but since it seems to bind the device anyway, I
thought reporting a bug would be a good idea.
Cheers,
--
gael, with some help from KiBi.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=49d40362-89c6-49c3-9c68-a8d78eb360d4 ro quiet
** Not tainted
** Kernel log:
[ 6.254104] Bluetooth: SCO socket layer initialized
[ 6.278606] ACPI: Battery Slot [BAT0] (battery present)
[ 6.280522] ACPI: AC Adapter [ADP1] (off-line)
[ 6.321282] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 6.416465] usbcore: registered new interface driver btusb
[ 6.471623] bluetooth hci0: firmware: failed to load brcm/BCM20702A0-0a5c-21e3.hcd (-2)
[ 6.471624] bluetooth hci0: Direct firmware load failed with error -2
[ 6.471625] bluetooth hci0: Falling back to user helper
[ 6.493511] iTCO_vendor_support: vendor-support=0
[ 6.494238] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.494267] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.494346] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.773356] AVX version of gcm_enc/dec engaged.
[ 6.777347] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.917882] alg: No test for crc32 (crc32-pclmul)
[ 7.288548] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
[ 7.289133] Console: switching to colour frame buffer device 170x48
[ 7.295625] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.295627] i915 0000:00:02.0: registered panic notifier
[ 7.330458] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 7.353321] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 7.384980] intel_rapl: RAPL domain dram detection failed
[ 7.385258] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 7.425230] ACPI : EC: GPE storm detected(20 GPEs), transactions will use polling mode
[ 7.446053] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x22c00, board id: 1910, fw id: 851366
[ 7.512494] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 7.665061] acpi device:2d: registered as cooling_device5
[ 7.665157] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input13
[ 7.845559] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.882005] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[ 8.215898] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e3.hcd not found
[ 8.238364] Adding 3998716k swap on /dev/sda7. Priority:-1 extents:1 across:3998716k FS
[ 8.353441] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.617724] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.662229] acpi device:3a: registered as cooling_device6
[ 8.667139] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
[ 8.682354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[ 8.682501] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.682553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.683565] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 8.683579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.685095] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
[ 8.772005] systemd-journald[158]: Received request to flush runtime journal from PID 1
[ 8.988857] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 8.988896] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 8.988925] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 8.988977] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 9.000776] bcma: bus0: Bus registered
[ 9.067521] [drm] radeon kernel modesetting enabled.
[ 9.067549] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 9.067654] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
[ 9.196157] r8169 0000:0b:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 9.196197] r8169 0000:0b:00.0: Direct firmware load failed with error -2
[ 9.196199] r8169 0000:0b:00.0: Falling back to user helper
[ 9.196574] r8169 0000:0b:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12)
[ 9.208772] r8169 0000:0b:00.0 eth0: link down
[ 9.208831] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.298322] cfg80211: Calling CRDA to update world regulatory domain
[ 9.337483] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 9.337557] b43: probe of bcma0:0 failed with error -524
[ 9.337584] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 9.511675] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 9.640235] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.846462] cfg80211: World regulatory domain updated:
[ 9.846472] cfg80211: DFS Master region: unset
[ 9.846475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.846482] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.846486] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.846490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.846494] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.846499] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.846503] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.846507] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.846511] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 36.687125] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 36.697992] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 36.817110] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 36.817216] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 36.818018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.647435] wlan0: authenticate with 64:87:88:34:25:04
[ 37.650915] wlan0: direct probe to 64:87:88:34:25:04 (try 1/3)
[ 37.851444] wlan0: direct probe to 64:87:88:34:25:04 (try 2/3)
[ 38.055701] wlan0: send auth to 64:87:88:34:25:04 (try 3/3)
[ 38.056984] wlan0: authenticated
[ 38.059766] wlan0: associate with 64:87:88:34:25:04 (try 1/3)
[ 38.061703] wlan0: RX AssocResp from 64:87:88:34:25:04 (capab=0x421 status=0 aid=1)
[ 38.062284] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 38.062380] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 38.062483] wlan0: associated
[ 38.062503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.062653] cfg80211: Calling CRDA for country: FR
[ 38.073593] cfg80211: Regulatory domain changed to country: FR
[ 38.073600] cfg80211: DFS Master region: ETSI
[ 38.073603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 38.073608] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 38.073613] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 38.073617] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[ 38.073620] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[ 38.073624] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 115.034200] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dm4 Notebook PC
product_version: 0694100011204010000623100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.05
board_vendor: Hewlett-Packard
board_name: 1794
board_version: 41.19
** Loaded modules:
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
cfg80211
ssb
rng_core
pcmcia
pcmcia_core
radeon
bcma
ttm
rtsx_pci_ms
memstick
joydev
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
hp_wmi
gf128mul
sparse_keymap
glue_helper
iTCO_wdt
iTCO_vendor_support
ecb
ablk_helper
cryptd
evdev
psmouse
i2c_i801
serio_raw
pcspkr
btusb
bluetooth
6lowpan_iphc
rfkill
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
ac
battery
wmi
intel_smartconnect
hp_accel
lis3lv02d
input_polldev
shpchp
i915
button
video
drm_kms_helper
drm
i2c_algo_bit
i2c_core
snd_hda_codec_hdmi
processor
snd_hda_codec_idt
lpc_ich
snd_hda_codec_generic
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
mei_me
mei
snd_pcm
snd_timer
snd
soundcore
autofs4
ext4
crc16
mbcache
jbd2
sg
sr_mod
cdrom
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
mmc_core
crct10dif_pclmul
crct10dif_common
crc32c_intel
r8169
mii
ahci
libahci
libata
scsi_mod
xhci_hcd
rtsx_pci
mfd_core
ehci_pci
ehci_hcd
usbcore
usb_common
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
#iface eth0 inet static
# address 192.168.0.2
# netmask 255.255.255.0
# network 192.168.0.0
# broadcast 192.168.0.255
# gateway 192.168.0.1
# # dns-* options are implemented by the resolvconf package, if installed
# dns-nameservers 192.168.0.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 10:1f:74:68:6c:3b brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether e4:d5:3d:93:d5:8d brd ff:ff:ff:ff:ff:ff
inet 10.243.33.223/21 brd 10.243.39.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 2001:450:1e:232:e6d5:3dff:fe93:d58d/64 scope global mngtmpaddr dynamic
valid_lft 2591998sec preferred_lft 604798sec
inet6 fe80::e6d5:3dff:fe93:d58d/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 2762063 2716 0 0 0 0 0 0 242917 1672 0 0 0 0 0 0
lo: 1595 17 0 0 0 0 0 0 1595 17 0 0 0 0 0 0
*** Protocol statistics:
Ip:
705 total packets received
20 with invalid addresses
0 forwarded
45 with unknown protocol
0 incoming packets discarded
380 incoming packets delivered
52 requests sent out
Icmp:
17 ICMP messages received
1 input ICMP message failed.
ICMP input histogram:
destination unreachable: 17
17 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 17
IcmpMsg:
InType3: 17
OutType3: 17
Tcp:
10 active connections openings
0 passive connection openings
0 failed connection attempts
2 connection resets received
0 connections established
1816 segments received
1630 segments send out
4 segments retransmited
0 bad segments received.
5 resets sent
Udp:
22 packets received
0 packets to unknown port received.
0 packet receive errors
35 packets sent
UdpLite:
TcpExt:
54 delayed acks sent
Quick ack mode was activated 2 times
1081 packet headers predicted
50 acknowledgments not containing data payload received
4 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
TCPLostRetransmit: 1
3 fast retransmits
1 forward retransmits
2 DSACKs sent for old packets
2 connections reset due to early user close
TCPSackShiftFallback: 13
TCPRcvCoalesce: 358
TCPOFOQueue: 465
TCPAutoCorking: 4
TCPOrigDataSent: 58
IpExt:
InBcastPkts: 386
InOctets: 99182
OutOctets: 3800
InBcastOctets: 48793
InNoECTPkts: 705
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0800000-c17fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1794]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 52
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: Memory at c1804000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1809000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at c1800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: c0700000-c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Memory behind bridge: c0600000-c06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: c0500000-c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c1808000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 49
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at c1807000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c1805000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1794]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 7
Region 0: Memory at a0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 2: Memory at c0800000 (64-bit, non-prefetchable) [disabled] [size=128K]
Region 4: I/O ports at 3000 [disabled] [size=256]
Expansion ROM at c0820000 [disabled] [size=128K]
Capabilities: <access denied>
09:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1795]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at c0600000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
0b:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
0c:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1793]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 003: ID 08ff:2665 AuthenTec, Inc.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 064e:e258 Suyin Corp. HP TrueVision HD Integrated Webcam
Bus 001 Device 003: ID 0a5c:21e3 Broadcom Corp. HP Portable Valentine
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 18-1
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.43
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
KiBi.
--- End Message ---