--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: regression: 3.16-0.bpo.3 -> 3.16.0-4 - doesn't register usb storage any more
- From: Tomas Pospisek <tpo_deb@sourcepole.ch>
- Date: Wed, 03 Dec 2014 09:35:16 +0100
- Message-id: <20141203083516.11599.6797.reportbug@hier>
Package: src:linux
Version: 3.16.7-2
Severity: normal
Hello,
as reported on d-d [1] after upgrading from
* wheezy with
* sysvinit and
* linux-image-3.16-0.bpo.3-amd64
to:
* jessie with
* systemd and
* linux-image-3.16.0-4-amd64
my system stopped being automatically able to make an attached
smartphone's USB storage visible under /dev/sd*.
What I do (and habe been doing in the past) is:
attach the smartphone via USB to the laptop. On the smartphone a dialog
pops up, that asks me how I want to make the smartphone visible to the
laptop: as 'MTD', as 'installer' or as 'storage'. I select 'storage'.
Normally at that point, the device would become visible as /dev/sdb.
However with linux-image-3.16.0-4-amd64 it doesn't appear under /dev any
more.
I've tried to switch the USB device's mode's manually with
usb_modeswitch, but allthough usb_modeswitch reports success
issuing the command and getting an answer back from the device, it
doesn't have any impact on making the device available as /dev/sd*.
The only way I've found to make the device available as /dev/sdb is to
reload the usb_storage module like this:
rmmod usb_storage && modprobe usb_storage
Here's an extract from /var/log/messages. First I attach the smartphone to
the laptop's usb plug:
Nov 27 13:46:41 hier kernel: [28652.975203] usb 4-1.1: new high-speed USB device number 26 using ehci-pci
Nov 27 13:46:41 hier kernel: [28653.068821] usb 4-1.1: New USB device found, idVendor=12d1, idProduct=1037
Nov 27 13:46:41 hier kernel: [28653.068831] usb 4-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Nov 27 13:46:41 hier kernel: [28653.068836] usb 4-1.1: Product: Android
Nov 27 13:46:41 hier kernel: [28653.068840] usb 4-1.1: Manufacturer: Android
Nov 27 13:46:41 hier kernel: [28653.068844] usb 4-1.1: SerialNumber: 4C8BEFBC3276
Nov 27 13:46:41 hier kernel: [28653.069822] usb-storage 4-1.1:1.0: USB Mass Storage device detected
Nov 27 13:46:41 hier kernel: [28653.070344] scsi15 : usb-storage 4-1.1:1.0
Nov 27 13:46:41 hier mtp-probe: checking bus 4, device 26: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1"
Nov 27 13:46:41 hier mtp-probe: bus: 4, device: 26 was not an MTP device
Nov 27 13:46:42 hier usb_modeswitch: switch device 12d1:1037 on 004/026
Nothing more happens in the log. The device is not visible as /dev/sdb.
Now I do a
rmmod usb_storage && modprobe usb_storage
at which point /var/log/messages continues like this:
Nov 27 13:46:55 hier kernel: [28666.858764] usbcore: deregistering interface driver usb-storage
Nov 27 13:47:01 hier kernel: [28672.635113] usb-storage 4-1.1:1.0: USB Mass Storage device detected
Nov 27 13:47:01 hier kernel: [28672.635615] scsi16 : usb-storage 4-1.1:1.0
Nov 27 13:47:01 hier kernel: [28672.635915] usbcore: registered new interface driver usb-storage
Nov 27 13:47:02 hier kernel: [28673.633832] scsi 16:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Nov 27 13:47:02 hier kernel: [28673.634382] scsi 16:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Nov 27 13:47:02 hier kernel: [28673.634813] scsi 16:0:0:2: CD-ROM Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Nov 27 13:47:02 hier kernel: [28673.636127] sd 16:0:0:0: Attached scsi generic sg2 type 0
Nov 27 13:47:02 hier kernel: [28673.636856] sd 16:0:0:1: Attached scsi generic sg3 type 0
Nov 27 13:47:02 hier kernel: [28673.637294] sd 16:0:0:0: [sdb] Attached SCSI removable disk
Nov 27 13:47:02 hier kernel: [28673.640180] sr1: scsi3-mmc drive: 0x/0x caddy
Nov 27 13:47:02 hier kernel: [28673.641721] sr 16:0:0:2: Attached scsi generic sg4 type 5
Nov 27 13:47:02 hier kernel: [28673.642690] sd 16:0:0:1: [sdc] Attached SCSI removable disk
Nov 27 13:47:11 hier kernel: [28682.358352] sd 16:0:0:0: [sdb] 2310144 512-byte logical blocks: (1.18 GB/1.10 GiB)
Nov 27 13:47:11 hier kernel: [28682.363018] sdb:
Nov 27 13:47:13 hier kernel: [28684.404459] sd 16:0:0:1: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
Nov 27 13:47:13 hier kernel: [28684.411152] sdc: sdc1
Nov 27 13:47:23 hier kernel: [28695.050516] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Nov 27 13:47:23 hier kernel: [28695.075737] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Now the smartphone's storage is visible as /dev/sdb and /dev/sdc
(the smartphone's internal and external storage cards).
The smartphone is a Huawei G510-0100.
Thanks,
*t
[1] https://lists.debian.org/debian-devel/2014/11/msg01220.html
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=14178330-c36b-4587-8c2b-d59727c55d72 ro quiet acpi_backlight=vendor
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dv7 Notebook PC
product_version: 058D110000244620001620100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.1A
board_vendor: Hewlett-Packard
board_name: 1659
board_version: 10.31
** Loaded modules:
dm_crypt
dm_mod
ctr
ccm
ecb
btusb
rfcomm
bnep
bluetooth
6lowpan_iphc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
ghash_clmulni_intel
aesni_intel
aes_x86_64
arc4
rt2800pci
rt2800mmio
rt2800lib
rt2x00pci
rt2x00mmio
lrw
snd_hda_codec_hdmi
rt2x00lib
eeprom_93cx6
mac80211
radeon
gf128mul
snd_hda_codec_idt
snd_hda_codec_generic
i915
cfg80211
glue_helper
ablk_helper
snd_hda_intel
snd_hda_controller
cryptd
ttm
iTCO_wdt
iTCO_vendor_support
joydev
rtsx_pci_ms
memstick
snd_hda_codec
snd_hwdep
snd_pcm
drm_kms_helper
drm
crc_ccitt
hp_wmi
sparse_keymap
snd_timer
rfkill
i2c_algo_bit
i2c_i801
snd
mei_me
soundcore
hp_accel
shpchp
i2c_core
mei
video
lis3lv02d
evdev
lpc_ich
psmouse
input_polldev
serio_raw
processor
pcspkr
ac
wmi
button
battery
sch_fq_codel
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
rtsx_pci_sdmmc
mmc_core
ahci
libahci
crct10dif_pclmul
crct10dif_common
crc32c_intel
libata
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
rtsx_pci
mfd_core
r8169
mii
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c6500000-c74fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 54
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 6000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at c7504000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c750a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at c7500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c5500000-c64fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=12, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c4500000-c54fffff
Prefetchable memory behind bridge: 00000000c1400000-00000000c23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=13, subordinate=18, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c3500000-c44fffff
Prefetchable memory behind bridge: 00000000c2400000-00000000c33fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=19, subordinate=19, sec-latency=0
Memory behind bridge: c3400000-c34fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c7509000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 51
Region 0: I/O ports at 6088 [size=8]
Region 1: I/O ports at 609c [size=4]
Region 2: I/O ports at 6080 [size=8]
Region 3: I/O ports at 6098 [size=4]
Region 4: I/O ports at 6060 [size=32]
Region 5: Memory at c7508000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c7506000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 6040 [size=32]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: radeon
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
0d:00.0 Network controller [0280]: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] [1814:539f]
Subsystem: Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless card [103c:1637]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c4500000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at c3500000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at c3510000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
19:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c3400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 064e:e258 Suyin Corp. HP TrueVision HD Integrated Webcam
Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Fingerprint scanner
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_CH.utf8, LC_CTYPE=de_CH.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.54
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-15
ii linux-doc-3.16 3.16.7-2
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.43
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
--- End Message ---