--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16-2-amd64: Elantech touchpad not responding after resume
- From: Hubert Sallé <hubert.salle@free.fr>
- Date: Tue, 25 Nov 2014 15:28:17 +0100
- Message-id: <54749201.60400@free.fr>
Package: src:linux
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where
appropriate ***
* What led up to the situation?
Not using the machine for a while, it suspends. That's ok.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Asking for resume, what I am able to do with the touchpad.
* What was the outcome of this action?
The touchpad does not respond anymore.
* What outcome did you expect instead?
The touchpad should resume as well.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64
root=UUID=1b495b85-4292-4b4a-a537-c96f82f70534 ro quiet
** Not tainted
** Kernel log:
[ 2192.348613] Intel pstate controlling: cpu 3
[ 2192.348688] CPU3 is up
[ 2192.352936] ACPI: Waking up from system sleep state S3
[ 2192.357446] acpi LNXPOWER:02: Turning OFF
[ 2192.357491] acpi LNXPOWER:01: Turning OFF
[ 2192.357531] acpi LNXPOWER:00: Turning OFF
[ 2192.372779] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2192.373026] PM: noirq resume of devices complete after 15.469 msecs
[ 2192.516685] PM: early resume of devices complete after 143.508 msecs
[ 2192.517108] snd_hda_intel 0000:00:1b.0: irq 109 for MSI/MSI-X
[ 2192.532850] sd 0:0:0:0: [sda] Starting disk
[ 2192.620920] pciehp 0000:00:1c.2:pcie04: Device 0000:02:00.0 already
exists at 0000:02:00, cannot hot-add
[ 2192.620924] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:02:00
[ 2192.621113] ath: phy0: ASPM enabled: 0x43
[ 2192.621247] pciehp 0000:00:1c.3:pcie04: Device 0000:03:00.0 already
exists at 0000:03:00, cannot hot-add
[ 2192.621252] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:03:00
[ 2192.621316] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 2192.663931] r8169 0000:03:00.0 eth0: link down
[ 2192.789921] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 2192.789953] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 2.
[ 2192.789963] usb 1-4: hub failed to enable device, error -22
[ 2192.861157] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2192.864848] ata2.00: configured for UDMA/133
[ 2192.957418] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 2192.957442] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 2.
[ 2192.957449] usb 1-4: hub failed to enable device, error -22
[ 2193.069501] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 2193.102116] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88003724e740
[ 2193.158179] usb 1-3.4: reset high-speed USB device number 5 using
xhci_hcd
[ 2193.158326] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 4.
[ 2193.158331] usb 1-3.4: hub failed to enable device, error -22
[ 2193.230140] usb 1-3.4: reset high-speed USB device number 5 using
xhci_hcd
[ 2193.230274] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 4.
[ 2193.230278] usb 1-3.4: hub failed to enable device, error -22
[ 2193.302135] usb 1-3.4: reset high-speed USB device number 5 using
xhci_hcd
[ 2193.318936] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880178fd6200
[ 2193.318939] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880178fd6248
[ 2193.318949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880178fd6290
[ 2193.390892] usb 1-3.1: reset full-speed USB device number 8 using
xhci_hcd
[ 2193.391018] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 7.
[ 2193.391030] usb 1-3.1: hub failed to enable device, error -22
[ 2193.462693] usb 1-3.1: reset full-speed USB device number 8 using
xhci_hcd
[ 2193.462817] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command
for slot 7.
[ 2193.462829] usb 1-3.1: hub failed to enable device, error -22
[ 2193.535267] usb 1-3.1: reset full-speed USB device number 8 using
xhci_hcd
[ 2193.551025] usb 1-3.1: device firmware changed
[ 2193.552388] PM: resume of devices complete after 1034.850 msecs
[ 2193.553603] PM: Finishing wakeup.
[ 2193.553611] Restarting tasks ... done.
[ 2193.578065] usb 1-3.1: USB disconnect, device number 8
[ 2193.579681] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88017aa16300
[ 2193.579692] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88017aa16390
[ 2193.579698] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88017aa16348
[ 2193.579705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880179f0a8c8
[ 2193.579711] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880179f0a880
[ 2193.585630] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2193.650220] usb 1-3.1: new full-speed USB device number 9 using xhci_hcd
[ 2193.739158] usb 1-3.1: New USB device found, idVendor=04ca,
idProduct=300b
[ 2193.739169] usb 1-3.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2193.741593] usb 1-3.1: firmware: direct-loading firmware
ar3k/AthrBT_0x31010000.dfu
[ 2193.787691] usb 1-3.1: firmware: direct-loading firmware
ar3k/ramps_0x31010000_40.dfu
[ 2193.802502] usb 1-3.1: USB disconnect, device number 9
[ 2194.002281] usb 1-3.1: new full-speed USB device number 10 using xhci_hcd
[ 2194.091662] usb 1-3.1: New USB device found, idVendor=04ca,
idProduct=300b
[ 2194.091683] usb 1-3.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2194.390386] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2194.495233] ata1.00: configured for UDMA/133
[ 2194.688961] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2194.736863] r8169 0000:03:00.0 eth0: link down
[ 2194.737162] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2194.757468] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2195.960383] wlan0: authenticate with 2e:4f:a7:16:8f:c8
[ 2195.975676] wlan0: send auth to 2e:4f:a7:16:8f:c8 (try 1/3)
[ 2195.977631] wlan0: authenticated
[ 2195.979552] wlan0: associate with 2e:4f:a7:16:8f:c8 (try 1/3)
[ 2195.988797] wlan0: RX AssocResp from 2e:4f:a7:16:8f:c8 (capab=0x411
status=0 aid=1)
[ 2195.988872] wlan0: associated
[ 2195.988918] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2243.931665] i2c_hid i2c-ELAN0501:00: error in i2c_hid_init_report
size:633 / ret_size:7
[ 2243.934903] i2c_hid i2c-ELAN0501:00: error in i2c_hid_init_report
size:69 / ret_size:7
[ 2243.948376] input: ELAN0501:00 04F3:300B UNKNOWN as
/devices/platform/80860F41:00/i2c-0/i2c-ELAN0501:00/0018:04F3:300B.0003/input/input15
[ 2243.949451] hid-multitouch 0018:04F3:300B.0003: input,hidraw0:
<UNKNOWN> HID v1.00 Mouse [ELAN0501:00 04F3:300B] on [ 3101.416473]
cfg80211: Calling CRDA to update world regulatory domain
[ 3101.591343] cfg80211: World regulatory domain updated:
[ 3101.591362] cfg80211: DFS Master region: unset
[ 3101.591372] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3101.591389] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 3101.591403] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 3101.591416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 3101.591429] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (N/A)
[ 3101.591443] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 3101.591456] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 3101.591469] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 3101.591482] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 3108.204510] wlan0: authenticate with 2e:4f:a7:16:8f:c8
[ 3108.211047] wlan0: send auth to 2e:4f:a7:16:8f:c8 (try 1/3)
[ 3108.213419] wlan0: authenticated
[ 3108.217537] wlan0: associate with 2e:4f:a7:16:8f:c8 (try 1/3)
[ 3108.227184] wlan0: RX AssocResp from 2e:4f:a7:16:8f:c8 (capab=0x411
status=0 aid=1)
[ 3108.227352] wlan0: associated
** Model information
sys_vendor: Acer
product_name: Aspire ES1-512
product_version: V1.04
chassis_vendor: Acer
chassis_version: V1.04
bios_vendor: Insyde Corp.
bios_version: V1.04
board_vendor: Acer
board_name: Aspire ES1-512
board_version: V1.04
** Loaded modules:
i2c_hid
ctr
ccm
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
rtsx_usb_ms
memstick
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
ecb
acer_wmi
sparse_keymap
arc4
joydev
ath3k
btusb
hid_multitouch
iTCO_wdt
bluetooth
ath9k
iTCO_vendor_support
ath9k_common
6lowpan_iphc
intel_powerclamp
ath9k_hw
i915
intel_rapl
ath
snd_hda_codec_hdmi
coretemp
kvm_intel
kvm
mac80211
snd_hda_codec_realtek
drm_kms_helper
cfg80211
efi_pstore
rfkill
snd_hda_codec_generic
drm
evdev
serio_raw
pcspkr
crc32_pclmul
efivars
ghash_clmulni_intel
cryptd
snd_hda_intel
snd_hda_controller
i2c_algo_bit
ac
processor
button
snd_hda_codec
snd_hwdep
lpc_ich
battery
snd_pcm
video
intel_smartconnect
shpchp
i2c_i801
i2c_designware_platform
snd_timer
snd
soundcore
iosf_mbi
wmi
i2c_designware_core
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
rtsx_usb_sdmmc
rtsx_usb
mfd_core
sg
sd_mod
crc_t10dif
sr_mod
crct10dif_generic
cdrom
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
xhci_hcd
libahci
fan
libata
r8169
mii
scsi_mod
usbcore
usb_common
thermal
thermal_sys
hid
i2c_core
sdhci_acpi
sdhci
mmc_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom
Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)
(prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 110
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:13.0 SATA controller [0106]: Intel Corporation Device [8086:0f23]
(rev 0e) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 108
Region 0: I/O ports at 2048 [size=8]
Region 1: I/O ports at 205c [size=4]
Region 2: I/O ports at 2040 [size=8]
Region 3: I/O ports at 2058 [size=4]
Region 4: I/O ports at 2020 [size=32]
Region 5: Memory at 9091c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 106
Region 0: Memory at 90900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 109
Region 0: Memory at 90910000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:0f48] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:0f4c] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 90600000-906fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:0f4e] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90500000-905fffff
Prefetchable memory behind bridge: 0000000090400000-00000000904fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:0f12] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 90918000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at 2000 [size=32]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565
Wireless Network Adapter [168c:0036] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:0642]
Physical Slot: 2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at 90680000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168]
(rev 0c)
Subsystem: Acer Incorporated [ALI] Device [1025:0936]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 107
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at 90500000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b47f Chicony Electronics Co., Ltd Bus 001
Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader
Controller
Bus 001 Device 010: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device
002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16-2-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
--- End Message ---