--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Two kworder processes takin up 30% CPU each after coming out of suspend
- From: Erik de Castro Lopo <erikd@mega-nerd.com>
- Date: Wed, 15 Oct 2014 08:13:28 +1100
- Message-id: <20141014211328.24944.93851.reportbug@localhost>
Package: src:linux
Version: 3.16.3-2
Severity: normal
I've now seen this a couple of times with this kernel after coming out
of suspend. This is not something I have seen on this now two year old
machine before.
After coming out of suspend top shows this:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19127 root 20 0 0 0 0 S 31.3 0.0 4:42.20 kworker/2:2
5448 root 20 0 0 0 0 S 31.3 0.0 0:25.94 kworker/0:0
84 root 20 0 0 0 0 S 18.8 0.0 6:21.82 khubd
3 root 20 0 0 0 0 S 12.5 0.0 4:51.46 ksoftirqd/0
18 root 20 0 0 0 0 S 6.3 0.0 3:43.13 ksoftirqd/2
The 'iotop -Pa' command shows almost zero I/O going on.
Running perf suggests this is an issue with the xhci_hub_control:
+ 8.65% 8.65% swapper [kernel.kallsyms] [k] intel_idle ◆
+ 7.92% 7.92% kworker/2:2 [kernel.kallsyms] [k] xhci_hub_control ▒
+ 7.80% 7.80% kworker/0:1 [kernel.kallsyms] [k] xhci_hub_control ▒
+ 1.08% 1.08% kworker/2:2 [kernel.kallsyms] [k] __switch_to ▒
+ 0.99% 0.99% kworker/0:1 [kernel.kallsyms] [k] __switch_to ▒
+ 0.84% 0.84% khubd [kernel.kallsyms] [k] _raw_spin_lock_i
I'm going to try linux-image-3.17-rc5-amd64.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=5065a2f9-ec31-4a10-8992-ccda124f2d26 ro
** Not tainted
** Kernel log:
[217163.906374] cfg80211: World regulatory domain updated:
[217163.906377] cfg80211: DFS Master region: unset
[217163.906378] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[217163.906380] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217163.906382] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217163.906383] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[217163.906384] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[217163.906385] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[217163.906386] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[217164.084725] wlan0: send auth to 6c:99:89:99:1a:af (try 2/3)
[217164.086361] wlan0: authenticated
[217164.088728] wlan0: associate with 6c:99:89:99:1a:af (try 1/3)
[217164.091941] wlan0: RX AssocResp from 6c:99:89:99:1a:af (capab=0x11 status=0 aid=1)
[217164.092041] wlan0: associated
[217164.092113] cfg80211: Calling CRDA for country: AU
[217164.096299] ath: EEPROM regdomain: 0x8024
[217164.096304] ath: EEPROM indicates we should expect a country code
[217164.096307] ath: doing EEPROM country->regdmn map search
[217164.096309] ath: country maps to regdmn code: 0x21
[217164.096311] ath: Country alpha2 being used: AU
[217164.096313] ath: Regpair used: 0x21
[217164.096316] ath: regdomain 0x8024 dynamically updated by country IE
[217164.096352] cfg80211: Regulatory domain changed to country: AU
[217164.096355] cfg80211: DFS Master region: unset
[217164.096358] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[217164.096362] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217164.096366] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[217164.096369] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[217164.096372] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[217164.096375] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[217387.136173] wlan0: authenticate with 6c:99:89:a7:93:40
[217387.142728] wlan0: send auth to 6c:99:89:a7:93:40 (try 1/3)
[217387.142791] cfg80211: Calling CRDA to update world regulatory domain
[217387.148750] wlan0: authenticated
[217387.152178] wlan0: associate with 6c:99:89:a7:93:40 (try 1/3)
[217387.157918] wlan0: RX AssocResp from 6c:99:89:a7:93:40 (capab=0x431 status=0 aid=4)
[217387.158006] wlan0: associated
[217387.158160] cfg80211: Calling CRDA to update world regulatory domain
[217387.165481] cfg80211: World regulatory domain updated:
[217387.165484] cfg80211: DFS Master region: unset
[217387.165485] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[217387.165487] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217387.165488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217387.165489] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[217387.165490] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[217387.165491] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[217387.165493] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[217387.165502] cfg80211: Calling CRDA for country: AU
[217387.169490] ath: EEPROM regdomain: 0x8024
[217387.169493] ath: EEPROM indicates we should expect a country code
[217387.169494] ath: doing EEPROM country->regdmn map search
[217387.169495] ath: country maps to regdmn code: 0x21
[217387.169496] ath: Country alpha2 being used: AU
[217387.169497] ath: Regpair used: 0x21
[217387.169498] ath: regdomain 0x8024 dynamically updated by country IE
[217387.169532] cfg80211: Regulatory domain changed to country: AU
[217387.169534] cfg80211: DFS Master region: unset
[217387.169535] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[217387.169537] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[217387.169538] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[217387.169539] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[217387.169540] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[217387.169541] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[217567.033033] r8169 0000:07:00.0 eth0: link down
[217573.939045] r8169 0000:07:00.0 eth0: link down
[217576.971013] r8169 0000:07:00.0 eth0: link up
[217576.971032] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[218619.598021] cfg80211: Calling CRDA to update world regulatory domain
[218619.616631] cfg80211: World regulatory domain updated:
[218619.616635] cfg80211: DFS Master region: unset
[218619.616636] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[218619.616638] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[218619.616639] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[218619.616640] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[218619.616642] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[218619.616643] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[218619.616644] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[218620.291299] wlan0: authenticate with 6c:99:89:a7:82:1f
[218620.302327] wlan0: direct probe to 6c:99:89:a7:82:1f (try 1/3)
[218620.503014] wlan0: send auth to 6c:99:89:a7:82:1f (try 2/3)
[218620.503906] wlan0: authenticated
[218620.507017] wlan0: associate with 6c:99:89:a7:82:1f (try 1/3)
[218620.510026] wlan0: RX AssocResp from 6c:99:89:a7:82:1f (capab=0x11 status=0 aid=1)
[218620.510073] wlan0: associated
[218620.510202] cfg80211: Calling CRDA for country: AU
[218620.512219] ath: EEPROM regdomain: 0x8024
[218620.512221] ath: EEPROM indicates we should expect a country code
[218620.512222] ath: doing EEPROM country->regdmn map search
[218620.512223] ath: country maps to regdmn code: 0x21
[218620.512224] ath: Country alpha2 being used: AU
[218620.512225] ath: Regpair used: 0x21
[218620.512226] ath: regdomain 0x8024 dynamically updated by country IE
[218620.512260] cfg80211: Regulatory domain changed to country: AU
[218620.512261] cfg80211: DFS Master region: unset
[218620.512262] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[218620.512264] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[218620.512265] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[218620.512266] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[218620.512267] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[218620.512268] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
** Model information
sys_vendor: Dell Inc.
product_name: XPS L421X
product_version: A12
chassis_vendor: Dell Inc.
chassis_version: A12
bios_vendor: Dell Inc.
bios_version: A12
board_vendor: Dell Inc.
board_name: 0CM76H
board_version: A00
** Loaded modules:
hid_generic
usbhid
hid
tun
rndis_host
cdc_ether
usbnet
cdc_acm
ctr
ccm
xt_CHECKSUM
iptable_mangle
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
ipt_REJECT
xt_tcpudp
iptable_filter
ip_tables
x_tables
bridge
stp
llc
binfmt_misc
bnep
joydev
ath3k
ecb
btusb
bluetooth
6lowpan_iphc
nls_utf8
nls_cp437
vfat
fat
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
iTCO_wdt
iTCO_vendor_support
dell_wmi
sparse_keymap
arc4
ghash_clmulni_intel
ath9k
ath9k_common
snd_hda_codec_hdmi
aesni_intel
nouveau
ath9k_hw
dell_laptop
ath
aes_x86_64
dcdbas
snd_hda_codec_realtek
lrw
mac80211
gf128mul
snd_hda_codec_generic
glue_helper
ablk_helper
cryptd
mxm_wmi
cfg80211
efi_pstore
rtsx_pci_ms
ttm
evdev
pcspkr
rfkill
psmouse
i2c_i801
memstick
serio_raw
efivars
lpc_ich
wmi
i915
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
drm_kms_helper
snd_timer
battery
drm
ac
dell_smo8800
snd
mei_me
i2c_algo_bit
video
mei
shpchp
soundcore
button
i2c_core
processor
thermal_sys
fuse
parport_pc
ppdev
lp
parport
loop
dm_crypt
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
ahci
libahci
libata
crct10dif_pclmul
crct10dif_common
ehci_pci
crc32c_intel
xhci_hcd
ehci_hcd
sdhci_pci
scsi_mod
rtsx_pci
sdhci
mfd_core
r8169
mmc_core
mii
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0000000-d0ffffff
Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d1700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d1714000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1719000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d1710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000d1400000-00000000d14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: d1600000-d16fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: d1500000-d15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:054d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d1718000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at d1717000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d1715000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: Dell GeForce GT 630M [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Expansion ROM at b2000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d1404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d1400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
08:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: Bigfoot Networks, Inc. Killer Wireless-N 1202 Half-size Mini PCIe Card [1a56:2003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d1600000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at d1680000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d1501000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
09:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Dell Device [1028:054d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at d1500000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 002 Device 033: ID 0cf3:3004 Atheros Communications, Inc.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:644d Microdia
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (500, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_AU.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
--- End Message ---