[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#757753: marked as done (/boot/vmlinuz-3.14-2-amd64: btrfs stuck in scrub, no way to recover)



Your message dated Sun, 25 Apr 2021 09:22:58 -0700 (PDT)
with message-id <60859762.1c69fb81.3b19.0747@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #757753,
regarding /boot/vmlinuz-3.14-2-amd64: btrfs stuck in scrub, no way to recover
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
757753: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=757753
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.14.13-2
Severity: normal
File: /boot/vmlinuz-3.14-2-amd64

Hello,

I started a scrub of one of my btrfs filesystem and then had to restart
the system. `systemctl restart` seemed to terminate all processes, but
then got stuck at the end. The disk activity led was still flashing
rapidly at that point, so I assume that the active scrub was preventing
the reboot (is that a bug or a feature?).

In any case, I could not wait for that so I power cycled. But now my
file system seems to be stuck in a scrub that can neither be completed
nor cancelled:

$ sudo btrfs scrub status /home/nikratio/
scrub status for 8742472d-a9b0-4ab6-b67a-5d21f14f7a38
        scrub started at Sun Aug 10 18:36:43 2014, running for 1562 seconds
        total bytes scrubbed: 209.97GiB with 0 errors

$ date
Sun Aug 10 22:00:44 PDT 2014

$ sudo btrfs scrub cancel /home/nikratio/
ERROR: scrub cancel failed on /home/nikratio/: not running

[2] nikratio@vostro:~/tmp
$ sudo btrfs scrub start /home/nikratio/
ERROR: scrub is already running.
To cancel use 'btrfs scrub cancel /home/nikratio/'.
To see the status use 'btrfs scrub status [-d] /home/nikratio/'.



-- Package-specific info:
** Version:
Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-5) ) #1 SMP Debian 3.14.13-2 (2014-07-24)

** Command line:
BOOT_IMAGE=/vmlinuz-3.14-2-amd64 root=/dev/mapper/vg0-debian ro quiet init=/bin/systemd

** Not tainted

** Kernel log:
[   21.993720] nouveau  [     DRM] TMDS table version 2.0
[   21.993721] nouveau  [     DRM] DCB version 4.0
[   21.993723] nouveau  [     DRM] DCB outp 00: 01000f02 00020030
[   21.993724] nouveau  [     DRM] DCB outp 01: 02000f00 00000000
[   21.993725] nouveau  [     DRM] DCB outp 02: 08011f82 00020030
[   21.993726] nouveau  [     DRM] DCB outp 03: 02022f62 00020010
[   21.993727] nouveau  [     DRM] DCB outp 04: 04833fb6 0f420010
[   21.993728] nouveau  [     DRM] DCB outp 05: 04033f72 00020010
[   21.993729] nouveau  [     DRM] DCB conn 00: 00001030
[   21.993731] nouveau  [     DRM] DCB conn 01: 00020131
[   21.993732] nouveau  [     DRM] DCB conn 02: 00010261
[   21.993733] nouveau  [     DRM] DCB conn 03: 00002346
[   21.994670] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   21.994671] [drm] Driver supports precise vblank timestamp query.
[   22.004790] nouveau  [     DRM] MM: using COPY for buffer copies
[   22.136617] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[   22.154145] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
[   22.170754] nouveau  [     DRM] allocated 2048x1152 fb: 0x80000, bo ffff880215097800
[   22.170793] fbcon: nouveaufb (fb0) is primary device
[   22.235324] Console: switching to colour frame buffer device 256x72
[   22.237115] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   22.237116] nouveau 0000:01:00.0: registered panic notifier
[   22.237119] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[   22.237149] hda_intel: Disabling MSI
[   22.237155] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   22.237263] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[   22.394490] usb_audio: Warning! Unlikely big volume range (=34656), cval->res is probably wrong.
[   22.394492] usb_audio: [3] FU [Mic Capture Volume] ch = 1, val = -32768/1888/1<6>[   22.394665] usbcore: registered new interface driver snd-usb-audio
[   22.500364] iTCO_vendor_support: vendor-support=0
[   22.514700] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   22.514758] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   22.514885] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   22.555322] asus_wmi: ASUS WMI generic driver loaded
[   22.629377] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   22.642575] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   22.642661] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   22.642730] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   22.642798] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   22.642862] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   22.642934] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   22.643030] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   22.643197] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   22.655209] asus_wmi: Initialization: 0x0
[   22.655242] asus_wmi: BIOS WMI version: 0.9
[   22.655293] asus_wmi: SFUN value: 0x0
[   22.655666] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
[   22.656410] asus_wmi: Disabling ACPI video driver
[   22.898930] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[   22.899009] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[   22.899098] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   22.899175] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   23.233714] Adding 4192252k swap on /dev/mapper/vg0-swap_crypt.  Priority:-1 extents:1 across:4192252k 
[   23.283900] EXT4-fs (sdc1): recovery complete
[   23.283906] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   23.346455] BTRFS: device label debian devid 1 transid 170337 /dev/dm-0
[   23.481236] BTRFS: device label debian devid 1 transid 170337 /dev/dm-0
[   23.760154] cfg80211: World regulatory domain updated:
[   23.760159] cfg80211:  DFS Master region: unset
[   23.760161] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.760163] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.760165] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.760167] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   23.760169] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   23.760170] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   23.760172] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   23.764484] Bluetooth: Core ver 2.18
[   23.764503] NET: Registered protocol family 31
[   23.764505] Bluetooth: HCI device and connection manager initialized
[   23.764513] Bluetooth: HCI socket layer initialized
[   23.764517] Bluetooth: L2CAP socket layer initialized
[   23.764534] Bluetooth: SCO socket layer initialized
[   23.831228] usb 6-1.7: firmware: failed to load ath3k-1.fw (-2)
[   23.831233] usb 6-1.7: Direct firmware load failed with error -2
[   23.831235] usb 6-1.7: Falling back to user helper
[   23.831894] Bluetooth: Firmware file "ath3k-1.fw" not found
[   23.831903] ath3k: probe of 6-1.7:1.0 failed with error -2
[   23.831942] usbcore: registered new interface driver ath3k
[   27.609125] BTRFS: device fsid 8742472d-a9b0-4ab6-b67a-5d21f14f7a38 devid 1 transid 166840 /dev/dm-6
[   27.616335] BTRFS: device fsid 8742472d-a9b0-4ab6-b67a-5d21f14f7a38 devid 1 transid 166840 /dev/dm-6
[   27.634099] BTRFS: device fsid 8742472d-a9b0-4ab6-b67a-5d21f14f7a38 devid 1 transid 166840 /dev/mapper/vg0-nikratio_crypt
[   27.634823] BTRFS info (device dm-6): disk space caching is enabled
[   30.299958] systemd-journald[352]: Received request to flush runtime journal from PID 1
[   33.373638] systemd-journald[352]: File /var/log/journal/b865c77cc176b5ef3b69390a0000000d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   33.474711] tun: Universal TUN/TAP device driver, 1.6
[   33.474716] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   33.732650] Bridge firewalling registered
[   33.735333] device eth0 entered promiscuous mode
[   33.891680] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   33.995217] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   33.995275] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.996869] device tap0 entered promiscuous mode
[   33.997732] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[   33.998750] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   35.543342] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   35.543348] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   35.543381] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.543403] br0: port 1(eth0) entered forwarding state
[   35.543408] br0: port 1(eth0) entered forwarding state
[   35.543449] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   50.619581] br0: port 1(eth0) entered forwarding state

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 3603
board_vendor: ASUSTeK Computer INC.
board_name: P8Z68-V GEN3
board_version: Rev 1.xx

** Loaded modules:
binfmt_misc
bridge
stp
llc
tun
ath3k
bluetooth
6lowpan_iphc
ext4
crc16
mbcache
jbd2
snd_hda_codec_hdmi
eeepc_wmi
snd_hda_codec_realtek
arc4
asus_wmi
sparse_keymap
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_generic
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
snd_hda_intel
snd_hda_codec
snd_hwdep
evdev
snd_pcm
rt2800pci
rt2800mmio
uvcvideo
rt2800lib
videobuf2_vmalloc
rt2x00pci
rt2x00mmio
videobuf2_memops
rt2x00lib
videobuf2_core
eeprom_93cx6
videodev
mac80211
nouveau
snd_timer
media
snd
cfg80211
mxm_wmi
ttm
soundcore
crc_ccitt
drm_kms_helper
rfkill
drm
wmi
i2c_algo_bit
i2c_i801
i2c_core
mei_me
lpc_ich
mei
mfd_core
psmouse
shpchp
battery
video
button
x86_pkg_temp_thermal
intel_powerclamp
pcspkr
intel_rapl
serio_raw
processor
kvm_intel
kvm
hwmon_vid
coretemp
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
btrfs
xor
raid6_pq
sha256_ssse3
sha256_generic
dm_crypt
hid_generic
usbhid
usb_storage
hid
dm_mod
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
ahci
gf128mul
glue_helper
ablk_helper
libahci
cryptd
libata
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
e1000e
usbcore
ptp
usb_common
pps_core
thermal
fan
thermal_sys

** PCI devices:
not available

** USB devices:
not available


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.14-2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    18-1
ii  linux-base                              3.5

Versions of packages linux-image-3.14-2-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.14-2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
pn  linux-doc-3.14          <none>

Versions of packages linux-image-3.14-2-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.43
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.14-2-amd64/postinst/mips-initrd-3.14-2-amd64:
  linux-image-3.14-2-amd64/postinst/depmod-error-initrd-3.14-2-amd64: false
  linux-image-3.14-2-amd64/prerm/removing-running-kernel-3.14-2-amd64: true

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: