[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#745635: marked as done (linux-image-3.2.0-4-amd64: ALC 883 fail to hear sound separate on channels.)



Your message dated Sat, 24 Apr 2021 23:44:11 -0700 (PDT)
with message-id <60850fbb.1c69fb81.c91ba.7492@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #745635,
regarding linux-image-3.2.0-4-amd64: ALC 883 fail to hear sound separate on channels.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
745635: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=745635
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.54-2
Severity: normal

Content of cat /proc/asound/*
cat: /proc/asound/CA0106: Is a directory
cat: /proc/asound/card0: Is a directory
cat: /proc/asound/card1: Is a directory
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfbff8000 irq 44
 1 [CA0106         ]: CA0106 - CA0106
                      Audigy SE [SB0570] at 0xec00 irq 16
  1:        : sequencer
  2: [ 1- 0]: raw midi
  3: [ 1- 3]: digital audio playback
  4: [ 1- 3]: digital audio capture
  5: [ 1- 2]: digital audio playback
  6: [ 1- 2]: digital audio capture
  7: [ 1- 1]: digital audio playback
  8: [ 1- 1]: digital audio capture
  9: [ 1- 0]: digital audio playback
 10: [ 1- 0]: digital audio capture
 11: [ 1]   : control
 12: [ 0- 2]: digital audio capture
 13: [ 0- 1]: digital audio playback
 14: [ 0- 0]: digital audio playback
 15: [ 0- 0]: digital audio capture
 16: [ 0- 0]: hardware dependent
 17: [ 0]   : control
 33:        : timer
00-00: HDA Codec 0
cat: /proc/asound/Intel: Is a directory
 0 snd_hda_intel
 1 snd_ca0106
cat: /proc/asound/oss: Is a directory
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-02: ALC883 Analog : ALC883 Analog : capture 1
01-00: ca0106 : CA0106 : playback 1 : capture 1
01-01: ca0106 : CA0106 : playback 1 : capture 1
01-02: ca0106 : CA0106 : playback 1 : capture 1
01-03: ca0106 : CA0106 : playback 1 : capture 1
cat: /proc/asound/seq: Is a directory
G0: system timer : 4000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
P0-1-0: PCM playback 0-1-0 : SLAVE
P0-2-1: PCM capture 0-2-1 : SLAVE
P1-0-0: PCM playback 1-0-0 : SLAVE
P1-0-1: PCM capture 1-0-1 : SLAVE
P1-1-0: PCM playback 1-1-0 : SLAVE
P1-1-1: PCM capture 1-1-1 : SLAVE
P1-2-0: PCM playback 1-2-0 : SLAVE
P1-2-1: PCM capture 1-2-1 : SLAVE
P1-3-0: PCM playback 1-3-0 : SLAVE
P1-3-1: PCM capture 1-3-1 : SLAVE
Advanced Linux Sound Architecture Driver Version 1.0.24.
On alsa modules CA0106 is normal and channels in separate ,and on ALC 883
stereo channels is together on alls channel.



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/system-debian_root ro quiet init=/bin/systemd

** Not tainted

** Kernel log:
[    5.036643] fuse init (API version 7.17)
[    5.108544] loop: module loaded
[    6.229142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.229150] ACPI: Power Button [PWRB]
[    6.229217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.229222] ACPI: Power Button [PWRF]
[    6.233124] ACPI: Requesting acpi_cpufreq
[    6.267568] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[    6.267572] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.280759] iTCO_vendor_support: vendor-support=0
[    6.281523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.281634] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    6.281710] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.297638] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.457773] coretemp coretemp.0: Using relative temperature scale!
[    6.457790] coretemp coretemp.0: Using relative temperature scale!
[    6.491755] [drm] Initialized drm 1.1.0 20060810
[    7.086787] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    7.290240] wmi: Mapper loaded
[    7.357175] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.357210] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.371273] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[    7.381948] nouveau 0000:01:00.0: setting latency timer to 64
[    7.381985] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046f00a3)
[    7.384812] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    7.464859] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    7.464863] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    7.464868] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    7.464872] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43
[    7.464875] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[    7.464878] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[    7.465020] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    7.465024] [drm] nouveau 0000:01:00.0: DCB version 3.0
[    7.465027] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028
[    7.465031] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011310 00000028
[    7.465033] [drm] nouveau 0000:01:00.0: DCB outp 02: 01011312 00000000
[    7.465036] [drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 00c0c080
[    7.465039] [drm] nouveau 0000:01:00.0: DCB conn 00: 0000
[    7.465041] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130
[    7.465044] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[    7.465047] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[    7.465049] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[    7.465057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0
[    7.465110] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F
[    7.480230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD
[    7.480252] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38
[    7.481372] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91
[    7.481553] [TTM] Zone  kernel: Available graphics memory: 2030410 kiB
[    7.481557] [TTM] Initializing pool allocator
[    7.481563] [TTM] Initializing DMA pool allocator
[    7.481577] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR2)
[    7.481597] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    7.487899] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    7.488288] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    7.550259] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.550263] [drm] No driver support for vblank timestamp query.
[    7.555306] hda_codec: ALC883: BIOS auto-probing.
[    7.558339] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    7.564168] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.872038] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[    7.872044] [drm] nouveau 0000:01:00.0: 0: core 550MHz shader 550MHz memory 540MHz fanspeed 100%
[    7.872048] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 391MHz
[    7.873039] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table
[    7.923323] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[    7.963631] Adding 2097148k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:2097148k 
[    8.028934] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88012742a000
[    8.029038] fbcon: nouveaufb (fb0) is primary device
[    8.043366] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table
[    8.095697] Console: switching to colour frame buffer device 160x64
[    8.098065] fb0: nouveaufb frame buffer device
[    8.098068] drm: registered panic notifier
[    8.098080] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    8.294719] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    8.944525] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2
[    9.029174] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2
[    9.406163] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[    9.474977] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/mapper/system-debian_home
[    9.475285] btrfs: disk space caching is enabled
[    9.820496] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    9.900317] Adding 2047996k swap on /dev/mapper/fedora_192--168--0--152-swap.  Priority:-2 extents:1 across:2047996k 
[   11.390070] RPC: Registered named UNIX socket transport module.
[   11.390074] RPC: Registered udp transport module.
[   11.390077] RPC: Registered tcp transport module.
[   11.390079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.498769] FS-Cache: Loaded
[   11.601858] FS-Cache: Netfs 'nfs' registered for caching
[   11.620237] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.843176] atl1 0000:02:00.0: irq 45 for MSI/MSI-X
[   11.843285] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   12.744662] ossctl[1011] trap int3 ip:7f0c102d4c13 sp:7fffd1444b10 error:0
[   14.705656] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.567327] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.840018] eth0: no IPv6 routers present
[   23.009084] 8139too 0000:05:01.0: eth1: link down
[   23.009724] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.414603] postgres (1572): /proc/1572/oom_adj is deprecated, please use /proc/1572/oom_score_adj instead.
[   33.712047] eth0: no IPv6 routers present
[   45.988324] ata5.00: configured for UDMA/133
[   45.988331] ata5: EH complete
[   93.179817] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)

** Model information
sys_vendor: System manufacturer
product_name: P5K SE
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1402   
board_vendor: ASUSTeK Computer INC.
board_name: P5K SE
board_version: Rev 1.xx

** Loaded modules:
ip6table_filter
ip6_tables
xt_tcpudp
iptable_filter
binfmt_misc
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
snd_hda_codec_realtek
nouveau
snd_ca0106
snd_hda_intel
snd_hda_codec
mxm_wmi
wmi
snd_ac97_codec
video
snd_seq_midi
snd_seq_midi_event
snd_hwdep
ttm
snd_rawmidi
snd_pcm
snd_seq
evdev
snd_page_alloc
snd_seq_device
drm_kms_helper
ac97_bus
drm
snd_timer
coretemp
snd
power_supply
serio_raw
pcspkr
iTCO_wdt
iTCO_vendor_support
i2c_i801
acpi_cpufreq
mperf
processor
button
soundcore
thermal_sys
i2c_algo_bit
i2c_core
asus_atk0110
cuse
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
jbd2
mbcache
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
usbhid
hid
sg
sd_mod
crc_t10dif
8139too
ata_generic
8139cp
floppy
ata_piix
pata_marvell
ahci
libahci
libata
uhci_hcd
atl1
mii
scsi_mod
ehci_hcd
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fc000000-fe8fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at c800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at c880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at cc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0400000-f07fffff
	Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: fe900000-fe9fffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at c080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at c400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at c480 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at ac00 [size=4]
	Region 2: I/O ports at a880 [size=8]
	Region 3: I/O ports at a800 [size=4]
	Region 4: I/O ports at a480 [size=16]
	Region 5: I/O ports at a400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0400 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at c000 [size=8]
	Region 1: I/O ports at bc00 [size=4]
	Region 2: I/O ports at b880 [size=8]
	Region 3: I/O ports at b800 [size=4]
	Region 4: I/O ports at b480 [size=16]
	Region 5: I/O ports at b400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81f3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at fe8e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at fe9a0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: atl1

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at dc00 [size=8]
	Region 1: I/O ports at d880 [size=4]
	Region 2: I/O ports at d800 [size=8]
	Region 3: I/O ports at d480 [size=4]
	Region 4: I/O ports at d400 [size=16]
	Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: pata_marvell

05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
	Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ec00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: snd_ca0106

05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at febe0000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: 8139too


** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04ca:0022 Lite-On Technology Corp. 
Bus 004 Device 002: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    16-2
ii  linux-base                              3.5
ii  module-init-tools                       16-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: