--- Begin Message ---
Package: src:linux
Version: 3.14.4-1
Severity: important
After upgrading from linux-image-3.13.1 to 3.14.1, the screen on my laptop (a
Dell D630) is very dim to almost black. Booting to the to image 3.13-1, using
grub, resolves the issue.
LSPCI:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated
Graphics Controller (secondary) (rev 0c)
-- Package-specific info:
** Version:
Linux version 3.14-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=f805755a-ee02-4e72-8971-3feaa1a8aa92 ro quiet
** Not tainted
** Kernel log:
[ 7.377718] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 7.377736] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 7.377749] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 7.377766] excluding 0xa0000000-0xa0ffffff
[ 7.377779] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 7.377796] excluding 0x60000000-0x60ffffff
[ 7.377808] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 7.378588] clean.
[ 7.453839] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[ 7.572863] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
[ 7.572867] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.572869] usb 7-1.2: Product: O2Micro CCID SC Reader
[ 7.572872] usb 7-1.2: Manufacturer: O2
[ 7.600295] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10
[ 7.620706] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.228820] Console: switching to colour frame buffer device 160x50
[ 8.233104] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.233107] i915 0000:00:02.0: registered panic notifier
[ 8.233282] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 8.233693] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input12
[ 8.233765] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 8.233792] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.386469] cfg80211: World regulatory domain updated:
[ 8.386473] cfg80211: DFS Master region: unset
[ 8.386474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.386477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.386479] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.386481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8.386482] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.386484] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.386486] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 8.800494] usb-storage 1-3.4:1.0: USB Mass Storage device detected
[ 8.800562] scsi4 : usb-storage 1-3.4:1.0
[ 8.800666] usbcore: registered new interface driver usb-storage
[ 9.802915] scsi 4:0:0:0: Direct-Access Seagate FreeAgent Go 102D PQ: 0 ANSI: 4
[ 9.803412] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 9.806978] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 9.808256] sd 4:0:0:0: [sdb] Write Protect is off
[ 9.808262] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 9.809628] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.058061] sdb: sdb1
[ 10.096791] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 10.625784] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k
[ 10.654018] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.898711] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.475951] lp0: using parport0 (interrupt-driven).
[ 11.493263] ppdev: user-space parallel port driver
[ 11.522990] loop: module loaded
[ 11.560315] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 11.578882] fuse init (API version 7.22)
[ 11.942856] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 11.945162] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.865859] RPC: Registered named UNIX socket transport module.
[ 13.865862] RPC: Registered udp transport module.
[ 13.865864] RPC: Registered tcp transport module.
[ 13.865865] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.899024] FS-Cache: Loaded
[ 13.950868] FS-Cache: Netfs 'nfs' registered for caching
[ 14.005768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.098759] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 21.220219] Bluetooth: Core ver 2.18
[ 21.220239] NET: Registered protocol family 31
[ 21.220241] Bluetooth: HCI device and connection manager initialized
[ 21.220251] Bluetooth: HCI socket layer initialized
[ 21.220254] Bluetooth: L2CAP socket layer initialized
[ 21.220264] Bluetooth: SCO socket layer initialized
[ 21.301845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.301849] Bluetooth: BNEP filters: protocol multicast
[ 21.301858] Bluetooth: BNEP socket layer initialized
[ 21.337944] Bluetooth: RFCOMM TTY layer initialized
[ 21.337951] Bluetooth: RFCOMM socket layer initialized
[ 21.337957] Bluetooth: RFCOMM ver 1.11
[ 45.022771] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[ 45.057983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 46.619634] tg3 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 46.619659] tg3 0000:09:00.0 eth0: Flow control is on for TX and on for RX
[ 46.619703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.735069] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[ 47.770695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.946051] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[ 47.981644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.689686] tg3 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 49.689707] tg3 0000:09:00.0 eth0: Flow control is on for TX and on for RX
[ 49.689737] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.771778] systemd-logind[2937]: New seat seat0.
[ 112.790002] systemd-logind[2937]: Watching system buttons on /dev/input/event11 (Video Bus)
[ 112.790077] systemd-logind[2937]: Watching system buttons on /dev/input/event5 (Power Button)
[ 112.790146] systemd-logind[2937]: Watching system buttons on /dev/input/event4 (Lid Switch)
[ 112.790217] systemd-logind[2937]: Watching system buttons on /dev/input/event6 (Sleep Button)
[ 112.790876] systemd-logind[2937]: New session 1 of user init.
[ 2300.848956] systemd-logind[2937]: New session 2 of user init.
[ 2300.849086] systemd-logind[2937]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 4070.421110] sd 4:0:0:0: [sdb] Unhandled error code
[ 4070.421117] sd 4:0:0:0: [sdb]
[ 4070.421121] Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 4070.421125] sd 4:0:0:0: [sdb] CDB:
[ 4070.421128] Read(10): 28 00 1b e8 00 57 00 00 08 00
[ 4070.421143] end_request: I/O error, dev sdb, sector 468189271
[ 4636.649018] perf samples too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 7897.877775] systemd-logind[2937]: New session 3 of user init.
** Model information
not available
** Loaded modules:
rfcomm
bnep
bluetooth
6lowpan_iphc
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
loop
ppdev
lp
usb_storage
joydev
dell_wmi
iTCO_wdt
iTCO_vendor_support
sparse_keymap
i915
tg3
pcmcia
coretemp
kvm_intel
kvm
sg
dell_laptop
dcdbas
sr_mod
yenta_socket
pcmcia_rsrc
cdrom
firewire_ohci
lpc_ich
drm_kms_helper
i2c_i801
pcspkr
evdev
mfd_core
pcmcia_core
ptp
firewire_core
drm
psmouse
crc_itu_t
serio_raw
button
arc4
battery
wmi
pps_core
libphy
uhci_hcd
i2c_algo_bit
iwl3945
iwlegacy
mac80211
cfg80211
snd_hda_codec_idt
snd_hda_codec_generic
parport_pc
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
tpm_tis
tpm
ehci_pci
rfkill
parport
ehci_hcd
snd_seq
ac
video
i2c_core
snd_seq_device
acpi_cpufreq
snd_timer
usbcore
snd
processor
usb_common
soundcore
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_common
ata_generic
thermal
thermal_sys
ata_piix
libata
scsi_mod
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1f:3c:bf:15:cd brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:21:70:ab:37:d1 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.254/24 brd 192.168.10.255 scope global eth0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 62647974 111200 0 0 0 0 0 0 62647974 111200 0 0 0 0 0 0
eth0: 14693640 73334 0 0 0 0 0 4343 66262154 93854 0 0 0 0 0 0
*** Protocol statistics:
Ip:
177191 total packets received
0 forwarded
0 incoming packets discarded
177191 incoming packets delivered
185183 requests sent out
27 outgoing packets dropped
111 dropped because of missing route
Icmp:
58 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 58
58 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 58
IcmpMsg:
InType3: 58
OutType3: 58
Tcp:
58 active connections openings
32 passive connection openings
9 failed connection attempts
7 connection resets received
4 connections established
172184 segments received
204117 segments send out
19 segments retransmited
0 bad segments received.
15 resets sent
Udp:
622 packets received
58 packets to unknown port received.
0 packet receive errors
495 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
27 TCP sockets finished time wait in fast timer
3598 delayed acks sent
6 delayed acks further delayed because of locked socket
Quick ack mode was activated 19 times
84905 packet headers predicted
20305 acknowledgments not containing data payload received
50578 predicted acknowledgments
4 other TCP timeouts
TCPLossProbes: 98
TCPLossProbeRecovery: 91
20 DSACKs sent for old packets
98 DSACKs received
5 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 92
TCPRcvCoalesce: 2077
TCPOFOQueue: 613
TCPSpuriousRtxHostQueues: 5
TCPAutoCorking: 2612
IpExt:
InMcastPkts: 4384
OutMcastPkts: 112
InBcastPkts: 111
InOctets: 75686349
OutOctets: 126349136
InMcastOctets: 2244196
OutMcastOctets: 7811
InBcastOctets: 12750
InNoECTPkts: 177240
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Latitude D630 [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f6e00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6f00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Dell Latitude D630 [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f6dfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f41fffff
Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6c00000-f6cfffff
Prefetchable memory behind bridge: 00000000f4400000-00000000f45fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f6b00000-f6bfffff
Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f6a00000-f6afffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=16]
Region 5: I/O ports at eff0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6dfbf00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: f4c00000-f4ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6aff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f6afe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6bf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6cff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bc2:2100 Seagate RSS LLC
Bus 001 Device 002: ID 413c:0058 Dell Computer Corp. Port Replicator
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (650, 'testing'), (600, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.14-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.14-1-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.18-5
Versions of packages linux-image-3.14-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-1-686-pae/postinst/depmod-error-initrd-3.14-1-686-pae: false
linux-image-3.14-1-686-pae/prerm/removing-running-kernel-3.14-1-686-pae: true
--- End Message ---