--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: kernel hangs under load - sometimes with panic messages, sometimes not; networking suspected (tg3)
- From: Steve McIntyre <steve@einval.com>
- Date: Fri, 24 May 2013 12:02:16 +0100
- Message-id: <20130524110216.8135.46161.reportbug@jack.mossbank.org.uk>
Package: src:linux
Version: 3.2.41-2+deb7u2
Severity: important
Hi folks,
Upgraded my server to wheezy at the weekend and I've been having quite
severe stability problems since. It's a home-built x86 machine that
acts as a firewall/router/server etc. and previously it had been
rock-solid.
I noticed that under heavy network-related IO load (lots of rsync,
NFS, scp, http etc.) it was hanging a couple of times per day or so,
sometimes with panic messages and sometimes not. It has 3 network
interfaces:
onboard Realtek 8168B (8169)
USB ethernet (asix)
PCI card with Broadcom Corporation NetXtreme BCM5702X (tg3)
and I was using the tg3 interface here, connected to a gigabit
switch. Initially, I was loading the tigon/tg3_tso.bin firmware (from
the linux-firmware-nonfree package) which allowed TSO. This was
reliably showing the problem under load. I removed the firmware file
and tested again (in case there was a problem with TSO, as I've seen
before on some NICs), but still no joy. Switching connections around
on the machine to use the on-board 8169 seems to have fixed the
reliability problems - I tested the machine under very heavy load
overnight and didn't see any issue at all.
When I first started seeing the problems here, I deliberately attached
a serial console to be able to log any panic messages. Log included
here (edited just to remove firewall-related log noise)...
====================================
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.175 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.35 BogoMIPS (lpj=9332700)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020043] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.032529] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043142] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.045480] Mount-cache hash table entries: 256
[ 0.048138] Initializing cgroup subsys cpuacct
[ 0.052010] Initializing cgroup subsys memory
[ 0.056017] Initializing cgroup subsys devices
[ 0.060007] Initializing cgroup subsys freezer
[ 0.064006] Initializing cgroup subsys net_cls
[ 0.068006] Initializing cgroup subsys blkio
[ 0.072011] Initializing cgroup subsys perf_event
[ 0.076036] CPU: Physical Processor ID: 0
[ 0.080006] CPU: Processor Core ID: 0
[ 0.084007] mce: CPU supports 6 MCE banks
[ 0.088013] CPU0: Thermal monitoring enabled (TM2)
[ 0.092009] using mwait in idle threads.
[ 0.096452] ACPI: Core revision 20110623
[ 0.112149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157892] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.168009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.170982] ... version: 2
[ 0.172011] ... bit width: 40
[ 0.176011] ... generic registers: 2
[ 0.180011] ... value mask: 000000ffffffffff
[ 0.184011] ... max period: 000000007fffffff
[ 0.188011] ... fixed-purpose events: 3
[ 0.192012] ... event mask: 0000000700000003
[ 0.196215] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.200145] Booting Node 0, Processors #1
[ 0.300049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.304152] #2
[ 0.400043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.404146] #3 Ok.
[ 0.500049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.504062] Brought up 4 CPUs
[ 0.508034] Total of 4 processors activated (18664.61 BogoMIPS).
[ 0.516225] devtmpfs: initialized
[ 0.524503] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.528197] print_constraints: dummy:
[ 0.532120] NET: Registered protocol family 16
[ 0.536132] ACPI: bus type pci registered
[ 0.540097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.544035] PCI: not using MMCONFIG
[ 0.548035] PCI: Using configuration type 1 for base access
[ 0.552790] bio: create slab <bio-0> at 0
[ 0.556120] ACPI: Added _OSI(Module Device)
[ 0.560037] ACPI: Added _OSI(Processor Device)
[ 0.564036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.568037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.577438] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.586846] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.592503] ACPI: Dynamic OEM Table Load:
[ 0.598312] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.604562] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.608500] ACPI: Dynamic OEM Table Load:
[ 0.612272] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.616564] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.620507] ACPI: Dynamic OEM Table Load:
[ 0.626314] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.636136] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.640504] ACPI: Dynamic OEM Table Load:
[ 0.644274] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.649288] ACPI: Interpreter enabled
[ 0.652044] ACPI: (supports S0 S3 S4 S5)
[ 0.657305] ACPI: Using IOAPIC for interrupt routing
[ 0.660063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.666399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.702875] ACPI: No dock devices found.
[ 0.704046] HEST: Table not found.
[ 0.708046] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.712130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.716224] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.720047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.724046] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.728046] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.732047] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.736075] DMAR: Forcing write-buffer flush capability
[ 0.740047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.745641] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.748054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.752087] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.756423] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.760059] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.764293] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.768056] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.772299] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.776057] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.781416] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.784512] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.788052] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.792050] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.809010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.816095] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.820786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.828468] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.834701] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.839014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.846564] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.852097] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.859073] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.860057] vgaarb: loaded
[ 0.864055] vgaarb: bridge control possible 0000:06:00.0
[ 0.868100] PCI: Using ACPI for IRQ routing
[ 0.877699] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.880059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.885453] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.900070] Switching to clocksource hpet
[ 0.905934] pnp: PnP ACPI init
[ 0.909047] ACPI: bus type pnp registered
[ 0.913368] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.920040] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.929037] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.935018] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.940988] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.947306] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.953972] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.960637] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.967525] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.974540] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.981506] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.987483] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.993457] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 0.999428] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.005489] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.013150] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.020170] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.027189] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.034204] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.041220] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.048366] pnp: PnP ACPI: found 14 devices
[ 1.052607] ACPI: ACPI bus type pnp unregistered
[ 1.066045] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.073950] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.081853] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.089753] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.096682] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.104581] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.110813] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.116088] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.122236] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.129075] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.134356] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.140505] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.147343] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.155152] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.160427] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.166574] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.173412] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.181225] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.186504] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.192652] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.199492] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.207312] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.212590] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.218742] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.225587] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.233405] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.240697] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.245976] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.252122] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.258963] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.267525] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.273465] NET: Registered protocol family 2
[ 1.278129] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.286867] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.297386] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.304531] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.311206] TCP reno registered
[ 1.314418] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.320618] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.327401] NET: Registered protocol family 1
[ 1.332117] Unpacking initramfs...
[ 1.605339] Freeing initrd memory: 14072k freed
[ 1.614170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.620690] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.628535] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.634824] audit: initializing netlink socket (disabled)
[ 1.640297] type=2000 audit(1369302122.640:1): initialized
[ 1.658648] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.666492] VFS: Disk quotas dquot_6.5.2
[ 1.670509] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.677085] msgmni has been set to 16007
[ 1.681342] alg: No test for stdrng (krng)
[ 1.685550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.693014] io scheduler noop registered
[ 1.708864] io scheduler deadline registered
[ 1.713219] io scheduler cfq registered (default)
[ 1.718528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.724174] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.730843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.737676] ERST: Table is not found!
[ 1.741396] GHES: HEST is not enabled!
[ 1.745269] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.771916] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.868482] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.874477] Linux agpgart interface v0.103
[ 1.878887] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.885726] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.896181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.901349] mousedev: PS/2 mouse device common for all mice
[ 1.907017] rtc_cmos 00:03: RTC can wake from S4
[ 1.911816] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.918004] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.924879] cpuidle: using governor ladder
[ 1.929030] cpuidle: using governor menu
[ 1.933080] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.933208] TCP cubic registered
[ 1.945110] NET: Registered protocol family 10
[ 1.950110] Mobile IPv6
[ 1.952610] NET: Registered protocol family 17
[ 1.957110] Registering the dns_resolver key type
[ 1.962077] registered taskstats version 1
[ 1.967128] rtc_cmos 00:03: setting system clock to 2013-05-23 09:42:04 UTC (1369302124)
[ 1.975328] Initializing network drop monitor service
[ 1.981829] Freeing unused kernel memory: 576k freed
[ 1.986973] Write protecting the kernel read-only data: 6144k
[ 1.995343] Freeing unused kernel memory: 660k freed
[ 2.003060] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.019682] udevd[58]: starting version 175
[ 2.037008] usbcore: registered new interface driver usbfs
[ 2.046499] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.062839] SCSI subsystem initialized
[ 2.067814] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c76000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 45
[ 2.068336] usbcore: registered new interface driver hub
[ 2.070290] usbcore: registered new device driver usb
[ 2.088772] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.099660] tg3.c:v3.121 (November 2, 2011)
[ 2.099934] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.110151] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c78000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 46
[ 2.120582] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.129268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.136581] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.141954] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.142362] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.142395] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.146297] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.152167] scsi0 : pata_jmicron
[ 2.169408] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.175315] scsi1 : pata_jmicron
[ 2.175331] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.175334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.175336] usb usb1: Product: EHCI Host Controller
[ 2.175338] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.175339] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.176068] hub 1-0:1.0: USB hub found
[ 2.176073] hub 1-0:1.0: 6 ports detected
[ 2.176189] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.176198] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 2.176243] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.176281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.176283] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.176285] usb usb2: Product: UHCI Host Controller
[ 2.176286] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.176288] usb usb2: SerialNumber: 0000:00:1a.0
[ 2.176382] hub 2-0:1.0: USB hub found
[ 2.176386] hub 2-0:1.0: 2 ports detected
[ 2.176465] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.176472] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 2.176513] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.176636] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.176639] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.176641] usb usb3: Product: UHCI Host Controller
[ 2.176642] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.176644] usb usb3: SerialNumber: 0000:00:1a.1
[ 2.176743] hub 3-0:1.0: USB hub found
[ 2.176747] hub 3-0:1.0: 2 ports detected
[ 2.220350] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 2.220354] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.220357] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.220359] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.364152] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.364613] ata1: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.364616] ata2: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.365472] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.366112] scsi2 : sata_mv
[ 2.366206] scsi3 : sata_mv
[ 2.366274] scsi4 : sata_mv
[ 2.366346] scsi5 : sata_mv
[ 2.366394] ata3: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.366397] ata4: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.366401] ata5: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.366406] ata6: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.434457] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 2.441958] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.450442] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.472021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.477841] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.484679] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.491964] usb usb4: Product: EHCI Host Controller
[ 2.496898] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.502956] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.507760] hub 4-0:1.0: USB hub found
[ 2.511571] hub 4-0:1.0: 6 ports detected
[ 2.515849] ahci: SSS flag set, parallel bus scan disabled
[ 2.521426] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.529694] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.574101] scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.574107] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.574108] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.574109]
[ 2.576649] scsi7 : ahci
[ 2.576741] scsi8 : ahci
[ 2.576815] scsi9 : ahci
[ 2.576885] scsi10 : ahci
[ 2.576955] scsi11 : ahci
[ 2.577025] scsi12 : ahci
[ 2.577196] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 47
[ 2.577199] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 47
[ 2.577202] ata9: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 47
[ 2.577204] ata10: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 47
[ 2.577207] ata11: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 47
[ 2.577209] ata12: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 47
[ 2.577273] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.577288] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.577337] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.577378] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.577381] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.577382] usb usb5: Product: UHCI Host Controller
[ 2.577384] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.577386] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.577510] hub 5-0:1.0: USB hub found
[ 2.577514] hub 5-0:1.0: 2 ports detected
[ 2.577598] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.577607] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.577636] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.577670] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.577672] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.577674] usb usb6: Product: UHCI Host Controller
[ 2.577675] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.577677] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.577767] hub 6-0:1.0: USB hub found
[ 2.577770] hub 6-0:1.0: 2 ports detected
[ 2.577844] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.577851] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.577878] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.577910] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.577913] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.577915] usb usb7: Product: UHCI Host Controller
[ 2.577916] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.577918] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.578007] hub 7-0:1.0: USB hub found
[ 2.578010] hub 7-0:1.0: 2 ports detected
[ 2.578084] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.578090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.578120] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.578152] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.578154] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.578156] usb usb8: Product: UHCI Host Controller
[ 2.578158] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.578159] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.578249] hub 8-0:1.0: USB hub found
[ 2.578253] hub 8-0:1.0: 2 ports detected
[ 2.632024] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.632028] Switching to clocksource tsc
[ 2.901878] ahci 0000:03:00.0: JMB361 has only one port
[ 2.907487] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.913418] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.921950] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.928443] scsi13 : ahci
[ 2.931218] scsi14 : ahci
[ 2.934056] ata13: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 2.935082] scsi 6:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 2.935088] scsi6:A:0:0: Tagged Queuing enabled. Depth 8
[ 2.935096] scsi target6:0:0: Beginning Domain Validation
[ 2.960684] ata14: DUMMY
[ 2.964643] scsi target6:0:0: wide asynchronous
[ 2.971804] scsi target6:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 2.984116] scsi target6:0:0: Ending Domain Validation
[ 2.992066] scsi 6:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.000237] scsi6:A:1:0: Tagged Queuing enabled. Depth 8
[ 3.005742] scsi target6:0:1: Beginning Domain Validation
[ 3.012053] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.018891] ata7.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 3.025147] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.032923] ata7.00: configured for UDMA/133
[ 3.037292] scsi target6:0:1: wide asynchronous
[ 3.044436] scsi target6:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.056728] scsi target6:0:1: Ending Domain Validation
[ 3.064682] scsi 6:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.072855] scsi6:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.078361] scsi target6:0:2: Beginning Domain Validation
[ 3.087102] scsi target6:0:2: wide asynchronous
[ 3.094252] scsi target6:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.106477] scsi target6:0:2: Ending Domain Validation
[ 3.112092] scsi15 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 3.112093] <Adaptec 3960D Ultra160 SCSI adapter>
[ 3.112094] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 3.112095]
[ 3.134678] scsi 6:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.142841] scsi6:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.148353] scsi target6:0:3: Beginning Domain Validation
[ 3.156809] scsi target6:0:3: wide asynchronous
[ 3.163657] scsi target6:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.172034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.180064] scsi target6:0:3: Ending Domain Validation
[ 3.188025] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 3.195029] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 3.201105] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.209745] scsi 6:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.218086] scsi6:A:4:0:
[ 3.218219] ata3.00: configured for UDMA/133
[ 3.218231] scsi: waiting for bus probes to complete ...
[ 3.230476] Tagged Queuing enabled. Depth 8
[ 3.234811] scsi target6:0:4: Beginning Domain Validation
[ 3.243840] scsi target6:0:4: wide asynchronous
[ 3.251096] scsi target6:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.263761] scsi target6:0:4: Ending Domain Validation
[ 3.280027] ata13: SATA link down (SStatus 0 SControl 300)
[ 3.341240] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.347990] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.355181] usb 1-5: Product: AX88772
[ 3.358981] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.363908] usb 1-5: SerialNumber: 000001
[ 3.525643] (scsi6:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.532663] (scsi6:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0)
[ 3.536645] Unexpected non-DT Data Phase
[ 3.545804] (scsi6:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.608011] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 3.774282] usb 2-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.781039] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.788228] usb 2-2: Product: USB-Serial Controller
[ 3.793160] usb 2-2: Manufacturer: Prolific Technology Inc.
[ 4.040010] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 4.288553] usb 3-1: New USB device found, idVendor=051d, idProduct=0002
[ 4.295319] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.302506] usb 3-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 4.308829] usb 3-1: Manufacturer: American Power Conversion
[ 4.314538] usb 3-1: SerialNumber: 4B0742P97300
[ 5.617734] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 5.623150] sd 6:0:0:0: [sda] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.623166] sd 6:0:1:0: [sdb] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.623177] sd 6:0:2:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.623199] sd 6:0:1:0: Attached scsi generic sg1 type 0
[ 5.623238] sd 6:0:2:0: Attached scsi generic sg2 type 0
[ 5.623272] sd 6:0:3:0: Attached scsi generic sg3 type 0
[ 5.623308] sd 6:0:4:0: Attached scsi generic sg4 type 0
[ 5.667278] sd 6:0:3:0: [sdd] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 5.667288] sd 6:0:4:0: [sde] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.667297] sd 6:0:1:0: [sdb] Write Protect is off
[ 5.667304] sd 6:0:2:0: [sdc] Write Protect is off
[ 5.704055] sd 6:0:1:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.704069] sd 6:0:4:0: [sde] Write Protect is off
[ 5.718119] sd 6:0:2:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.718132] sd 6:0:0:0: [sda] Write Protect is off
[ 5.718142] sd 6:0:3:0: [sdd] Write Protect is off
[ 5.737043] sd 6:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 5.745769] sd 6:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5.745783] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.767363] sdb: sdb1 sdb2
[ 5.772839] sdc: sdc1 sdc2
[ 5.773705] sda: sda1 sda2
[ 5.773769] sd 6:0:1:0: [sdb] Attached SCSI disk
[ 5.783230] sdd: sdd1 sdd2
[ 5.783288] sde: sde1 sde2
[ 5.792378] sd 6:0:0:0: [sda] Attached SCSI disk
[ 5.797078] sd 6:0:3:0: [sdd] Attached SCSI disk
[ 5.797085] sd 6:0:4:0: [sde] Attached SCSI disk
[ 5.806469] sd 6:0:2:0: [sdc] Attached SCSI disk
[ 6.978895] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 6.987225] sd 2:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.987250] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 7.000821] sd 2:0:0:0: [sdf] Write Protect is off
[ 7.005691] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.021283] sdf: sdf1
[ 7.023931] sd 2:0:0:0: [sdf] Attached SCSI disk
[ 7.480023] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.516047] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 7.523064] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.552044] ata4.00: configured for UDMA/133
[ 7.556462] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 7.564757] sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 7.564780] sd 3:0:0:0: Attached scsi generic sg6 type 0
[ 7.577741] sd 3:0:0:0: [sdg] Write Protect is off
[ 7.582604] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.619878] sdg: sdg1
[ 7.622521] sd 3:0:0:0: [sdg] Attached SCSI disk
[ 8.040022] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.108044] ata5.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 8.113757] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.184044] ata5.00: configured for UDMA/133
[ 8.188458] scsi 4:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 8.196770] sd 4:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 8.196802] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 8.209756] sd 4:0:0:0: [sdh] Write Protect is off
[ 8.214622] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.246445] sdh: sdh1
[ 8.249088] sd 4:0:0:0: [sdh] Attached SCSI disk
[ 8.672022] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.700306] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 8.706372] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.720307] ata6.00: configured for UDMA/133
[ 8.724730] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 8.733022] sd 5:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.733045] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 8.733187] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 8.733319] sd 7:0:0:0: Attached scsi generic sg9 type 0
[ 8.733411] sd 7:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.733413] sd 7:0:0:0: [sdj] 4096-byte physical blocks
[ 8.733477] sd 7:0:0:0: [sdj] Write Protect is off
[ 8.733507] sd 7:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.749501] sdj: sdj1
[ 8.789202] sd 7:0:0:0: [sdj] Attached SCSI disk
[ 8.789222] sd 5:0:0:0: [sdi] Write Protect is off
[ 8.789244] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.799467] sdi: sdi1
[ 8.810405] sd 5:0:0:0: [sdi] Attached SCSI disk
[ 9.108015] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.114816] ata8.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 9.121051] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.128806] ata8.00: configured for UDMA/133
[ 9.133239] scsi 8:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 9.141656] sd 8:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.149474] sd 8:0:0:0: [sdk] 4096-byte physical blocks
[ 9.152054] sd 8:0:0:0: Attached scsi generic sg10 type 0
[ 9.160257] sd 8:0:0:0: [sdk] Write Protect is off
[ 9.165125] sd 8:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.185348] sdk: sdk1
[ 9.187972] sd 8:0:0:0: [sdk] Attached SCSI disk
[ 9.472017] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.479498] ata9.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 9.486519] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.494982] ata9.00: configured for UDMA/133
[ 9.499382] scsi 9:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 9.507665] sd 9:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.507723] sd 9:0:0:0: Attached scsi generic sg11 type 0
[ 9.520971] sd 9:0:0:0: [sdl] Write Protect is off
[ 9.525852] sd 9:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.536936] sdl: sdl1
[ 9.539541] sd 9:0:0:0: [sdl] Attached SCSI disk
[ 9.824024] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.830935] ata10.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 9.837264] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.845124] ata10.00: configured for UDMA/133
[ 9.849611] scsi 10:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 9.857979] sd 10:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.858025] sd 10:0:0:0: Attached scsi generic sg12 type 0
[ 9.871425] sd 10:0:0:0: [sdm] 4096-byte physical blocks
[ 9.876835] sd 10:0:0:0: [sdm] Write Protect is off
[ 9.881790] sd 10:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.902808] sdm: sdm1
[ 9.905416] sd 10:0:0:0: [sdm] Attached SCSI disk
[ 10.176014] ata11: SATA link down (SStatus 0 SControl 300)
[ 10.500015] ata12: SATA link down (SStatus 0 SControl 300)
[ 12.029793] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 12.045739] usbcore: registered new interface driver usbhid
[ 12.051365] usbhid: USB HID core driver
Begin: Loading essential drivers[ 12.498207] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 12.507433] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.519552] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 12.527806] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.536213] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.548319] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 12.556580] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.564977] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.577091] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 12.585347] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.593802] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.617685] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 12.626055] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 13.064707] md: md0 stopped.
[ 13.083093] md: bind<sdb1>
[ 13.086106] md: bind<sda1>
[ 13.090126] md: raid1 personality registered for level 1
[ 13.095758] bio: create slab <bio-1> at 1
[ 13.099928] md/raid1:md0: active with 2 out of 2 mirrors
[ 13.105335] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 13.112450] md0:
has been started with 2 drives.
[ 13.321711] md: md1 stopped.
[ 13.345642] md: bind<sde1>
[ 13.357300] md: bind<sdc1>
[ 13.361182] md/raid1:md1: active with 2 out of 2 mirrors
[ 13.366997] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 13.391511] md1: unknown partition table
[ 13.435306] md: md10 stopped.
[ 13.439126] md: bind<sdh1>
[ 13.442054] md: bind<sdg1>
[ 13.445955] md/raid1:md10: active with 2 out of 2 mirrors
[ 13.451465] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 13.459625] md10: unknown partition table
d with 2 drives.
[ 13.495071] md: md9 stopped.
[ 13.498713] md: bind<sdi1>
[ 13.501646] md: bind<sdf1>
[ 13.506036] md/raid1:md9: active with 2 out of 2 mirrors
[ 13.511443] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 13.522977] md9: unknown partition table
[ 13.596819] md: md3 stopped.
[ 13.600767] md: bind<sdl1>
[ 13.603670] md: bind<sdj1>
[ 13.607508] md/raid1:md3: active with 2 out of 2 mirrors
[ 13.612928] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started[ 13.620566] md3: unknown partition table
with 2 drives.
[ 13.668436] md: md4 stopped.
[ 13.672268] md: bind<sdm1>
[ 13.675189] md: bind<sdk1>
[ 13.679032] md/raid1:md4: active with 2 out of 2 mirrors
[ 13.684466] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 13.692083] md4: unknown partition table
with 2 drives.
[ 13.985293] md: md6 stopped.
[ 13.989617] md: bind<sdd2>
[ 13.992725] md: bind<sda2>
[ 13.996589] md/raid1:md6: active with 2 out of 2 mirrors
[ 14.002002] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 14.009634] md6: unknown partition table
with 2 drives.
[ 14.278023] md: md7 stopped.
[ 14.295278] md: bind<sde2>
[ 14.299234] md: bind<sdb2>
[ 14.303081] md/raid1:md7: active with 2 out of 2 mirrors
[ 14.308485] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 14.338985] md7: unknown partition table
[ 14.630540] md: md8 stopped.
[ 14.644698] md: bind<md7>
[ 14.647598] md: bind<md6>
[ 14.651355] md: raid0 personality registered for level 0
[ 14.656934] md/raid0:md8: md_size is 566178176 sectors.
[ 14.662216] md: RAID0 configuration for md8 - 2 zones
[ 14.667318] md: zone0=[md6/md7]
[ 14.670658] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 14.678896] md: zone1=[md7]
[ 14.681838] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 14.690086]
[ 14.691632] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 14.699606] md8: unknown partition table
with 2 drives.[ 14.704762] device-mapper: uevent: version 1.0.3
Success: assemb[ 14.710764] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 14.831960] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 14.868514] kjournald starting. Commit interval 5 seconds
[ 14.868526] EXT3-fs (md0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 16.311268] udevd[557]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 16.457739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 16.466803] ACPI: Power Button [PWRB]
[ 16.471800] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.480037] ACPI: Power Button [PWRF]
[ 16.483855] ACPI: Requesting acpi_cpufreq
[ 16.516662] udevd[588]: renamed network interface eth1 to eth3
[ 16.532540] udevd[595]: renamed network interface eth2 to rename4
[ 16.552564] udevd[585]: renamed network interface eth0 to eth2
[ 16.592520] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.599279] iTCO_vendor_support: vendor-support=0
[ 16.600440] udevd[595]: renamed network interface rename4 to eth0
[ 16.641313] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 16.647201] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 16.654504] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 16.654564] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.670542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.681735] usbcore: registered new interface driver usbserial
[ 16.691119] USB Serial support registered for generic
[ 16.846121] Error: Driver 'pcspkr' is already registered, aborting...
[ 16.965464] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 16.976403] usbcore: registered new interface driver asix
[ 16.976411] usbcore: registered new interface driver usbserial_generic
[ 16.976413] usbserial: USB Serial Driver core
[ 17.105234] USB Serial support registered for pl2303
[ 17.110286] pl2303 2-2:1.0: pl2303 converter detected
[ 17.127376] usb 2-2: pl2303 converter now attached to ttyUSB0
[ 17.133225] usbcore: registered new interface driver pl2303
[ 17.138874] pl2303: Prolific PL2303 USB to serial adaptor driver
done.
Setting hostname to 'jack'...done.
Setting parameters of disc: /dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm failed!
Activating swap:swapon on /dev/md1
swapon: /dev[ 18.424229] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17945/122640 files, 111204/489952 blocks
.
[ 18.651635] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: clean, 979418/8519680 files, 26281314/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: clean, 1974176/244195328 files, 514582290/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: clean, 18875/91578368 files, 317393916/366284800 blocks
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp: clean, 16/655360 files, 46900/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: clean, 17906/655360 files, 1385953/2621440 blocks
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: clean, 277592/458752 files, 1519326/1835008 blocks
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 25.222031] kjournald starting. Commit interval 5 seconds
[ 25.231550] EXT3-fs (dm-4): using internal journal
[ 25.236405] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 25.265304] kjournald starting. Commit interval 5 seconds
[ 25.279948] EXT3-fs (dm-3): using internal journal
[ 25.284809] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 25.342739] kjournald starting. Commit interval 5 seconds
[ 25.353890] EXT3-fs (dm-1): using internal journal
[ 25.358737] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 25.401950] kjournald starting. Commit interval 5 seconds
[ 25.411591] EXT3-fs (dm-2): using internal journal
[ 25.416451] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 25.664624] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 25.750771] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
[ 26.243497] fuse init (API version 7.17)
failed!
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Initializing random number generator...[ ok done.
[....] Configuring network interfaces...[ 27.633287] tg3 0000:06:02.0: firmware: agent loaded tigon/tg3_tso.bin into memory
[ 27.694303] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.905564] tg3 0000:06:02.0: eth0: Link is up at 1000 Mbps, full duplex
[ 30.908837] tg3 0000:06:02.0: eth0: Flow control is off for TX and off for RX
[ 30.920747] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 59.067645] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 59.111368] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 59.117999] asix 1-5:1.0: eth1: link down
[ 60.904815] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
^[^H[ 69.178299] r8169 0000:04:00.0: eth2: link down
[ 69.184235] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 70.876898] r8169 0000:04:00.0: eth2: link up
[ 70.880885] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 79.536505] PPP generic driver version 2.4.2
[ 80.038771] NET: Registered protocol family 24
[ 81.035851] u32 classifier
[ 81.038660] Performance counters on
[ 81.042552] input device check on
[ 81.046274] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 90.372678] RPC: Registered named UNIX socket transport module.
[ 90.378665] RPC: Registered udp transport module.
[ 90.383444] RPC: Registered tcp transport module.
[ 90.388197] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 90.437406] FS-Cache: Loaded
[ 90.502989] FS-Cache: Netfs 'nfs' registered for caching
[ 90.555391] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
Recovering nvi editor sessions...none found.
[....] Starting filesystem in userspace: fuse[ ok .
Loading the saved-state of the serial devices...
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
[....] Setting sensors limits[ ok .
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Starting gmediaserver: [....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] Starting NTP server: ntpd[ ok .
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting internet superserver: inetd[ ok .
[....] Starting automount...[ ok .
[....] Starting system message bus: dbus[ ok .
[....] Starting domain name service...: bind9[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
[....] Starting authentication failure monitor: fail2ban[ ok .
[ 94.289932] ip_tables: (C) 2000-2006 Netfilter Core Team
[....] Starting User-mode networking switch: uml_switch[ ok .
Starting news server: done.
[....] Starting virtual private network daemon: server[ 94.893220] tun: Universal TUN/TAP device driver, 1.6
[ 94.898338] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ ok .
[....] Starting web server: apache2httpd (pid 2713) already running
[ ok .
[....] Starting network benchmark server[ ok .
[....] Starting periodic command scheduler: cron[ ok .
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[ 95.338350] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 95.353995] NFSD: starting 90-second grace period
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Starting System status server: rwhod[ ok .
saned disabled; edit /etc/default/saned
[ 95.803758] lp: driver loaded but no devices found
[ 95.815220] ppdev: user-space parallel port driver
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
[....] Starting rsync daemon: rsync[ ok .
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
[....] Starting MTA: exim4[ ok .
Configuring kernel parameters... done
[....] Starting HPA's tftpd: in.tftpd[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 104.102824] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[ ok .
Debian GNU/Linux 7.0 jack ttyS0
[ 4822.068050] general protection fault: 0000 [#1] SMP
[ 4822.072003] CPU 1
[ 4822.072003] Modules linked in: tcp_diag inet_diag xt_mac ipt_LOG ipt_REJECT xt_TCPMSS xt_tcpmss xt_state ipt_MASQUERADE xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack parport_pc ppdev lp parport tun xt_multiport iptable_filter ip_tables x_tables autofs4 nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc act_police sch_ingress cls_u32 sch_sfq sch_cbq pppoe pppox ppp_generic slhc fuse ext4 crc16 jbd2 ext2 pl2303 snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_timer snd soundcore usbserial i2c_i801 asix iTCO_wdt usbnet coretemp iTCO_vendor_support pcspkr evdev i2c_core acpi_cpufreq mperf processor button thermal_sys ext3 mbcache jbd dm_mod raid0 raid1 md_mod microcode ata_generic usbhid sg sd_mod crc_t10dif hid sata_mv ahci aic7xxx uhci_hcd libahci pata_jmicron libata scsi_transport_spi tg3 libphy ehci_hcd scsi_mod r8169 mii usbcore usb_common [last unloaded: scsi_wait_scan]
[ 4822.072003]
[ 4822.072003] Pid: 13158, comm: sshd Not tainted 3.2.0-4-amd64 #1 Debian 3.2.41-2+deb7u2 O.E.M. O.E.M./P43AL-V/P43AL
[ 4822.072003] RIP: 0010:[<ffffffff81285891>] [<ffffffff81285891>] skb_copy_ubufs+0xf8/0x1a3
[ 4822.072003] RSP: 0000:ffff88021fc83c60 EFLAGS: 00010286
[ 4822.072003] RAX: 813f549f3814f000 RBX: ffff880213ad01c0 RCX: 0000000054524f50
[ 4822.072003] RDX: ffff8801f4535000 RSI: 813f549f8c673f50 RDI: ffff8801f4535000
[ 4822.072003] RBP: 0000000000000000 R08: ffff8801f4558eb8 R09: 00000000000efe12
[ 4822.072003] R10: 0000000000000002 R11: 0000000000002e73 R12: 0000000000000001
[ 4822.072003] R13: ffffea0006d72398 R14: 2d44494c2d44494c R15: 0000160000000000
[ 4822.072003] FS: 00007f0fd1cc97c0(0000) GS:ffff88021fc80000(0000) knlGS:0000000000000000
[ 4822.072003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4822.072003] CR2: 00007f0fd00dbca0 CR3: 0000000214b79000 CR4: 00000000000406e0
[ 4822.072003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4822.072003] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 4822.072003] Process sshd (pid: 13158, threadinfo ffff880213bba000, task ffff88021315b1a0)
[ 4822.072003] Stack:
[ 4822.072003] 0000000000000000 ffff8801f4558eb8 ffff8801f4558800 000006800000494c
[ 4822.072003] 0000000000000020 ffff880213ad01c0 0000000000000020 ffff880214348000
[ 4822.072003] 0000000000000000 ffffffff816918f0 000000000000034a ffffffff81285d41
[ 4822.072003] Call Trace:
[ 4822.072003] <IRQ>
[ 4822.072003] [<ffffffff81285d41>] ? skb_clone+0x21/0x88
[ 4822.072003] [<ffffffff813272f8>] ? packet_rcv_spkt+0x46/0xe8
[ 4822.072003] [<ffffffff8128ccb3>] ? __netif_receive_skb+0x3c0/0x428
[ 4822.072003] [<ffffffff8128e66a>] ? netif_receive_skb+0x63/0x69
[ 4822.072003] [<ffffffff8128eb3c>] ? napi_gro_receive+0x1d/0x2b
[ 4822.072003] [<ffffffff8128e6e6>] ? napi_skb_finish+0x1c/0x31
[ 4822.072003] [<ffffffffa0044042>] ? tg3_poll_work+0x5ec/0x9d2 [tg3]
[ 4822.072003] [<ffffffffa0044657>] ? tg3_poll+0x181/0x24d [tg3]
[ 4822.072003] [<ffffffff8128ec5a>] ? net_rx_action+0xa1/0x1af
[ 4822.072003] [<ffffffff812438e9>] ? add_interrupt_randomness+0x38/0x155
[ 4822.072003] [<ffffffff8104c094>] ? __do_softirq+0xb9/0x177
[ 4822.072003] [<ffffffff81354c2c>] ? call_softirq+0x1c/0x30
[ 4822.072003] [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[ 4822.072003] [<ffffffff8104c2fc>] ? irq_exit+0x3c/0x9a
[ 4822.072003] [<ffffffff81027a01>] ? native_apic_msr_read+0xf/0x27
[ 4822.072003] [<ffffffff8100f60d>] ? do_IRQ+0x82/0x98
[ 4822.072003] [<ffffffff8134dcee>] ? common_interrupt+0x6e/0x6e
[ 4822.072003] <EOI>
[ 4822.072003] Code: 6d db b6 6d 48 c1 fa 03 48 0f af d1 41 8b 70 08 48 b9 00 00 00 00 00 88 ff ff 48 c1 e2 0c 48 01 c6 48 01 ca 41 8b 48 0c 48 89 d7 <f3> a4 e8 0e e3 ff ff 49 89 6d 30 4c 89 ed 44 39 64 24 18 0f 8f
[ 4822.072003] RIP [<ffffffff81285891>] skb_copy_ubufs+0xf8/0x1a3
[ 4822.072003] RSP <ffff88021fc83c60>
[ 4822.421072] ---[ end trace 90ce3b0be4384eb2 ]---
[ 4822.425743] Kernel panic - not syncing: Fatal exception in interrupt
[ 4822.432167] Pid: 13158, comm: sshd Tainted: G D 3.2.0-4-amd64 #1 Debian 3.2.41-2+deb7u2
[ 4822.441109] Call Trace:
[ 4822.443597] <IRQ> [<ffffffff81347188>] ? panic+0x95/0x1a2
[ 4822.449286] [<ffffffff8134e846>] ? oops_end+0xa9/0xb6
[ 4822.454478] [<ffffffff8134df85>] ? general_protection+0x25/0x30
[ 4822.460537] [<ffffffff81285891>] ? skb_copy_ubufs+0xf8/0x1a3
[ 4822.466344] [<ffffffff81285d41>] ? skb_clone+0x21/0x88
[ 4822.471631] [<ffffffff813272f8>] ? packet_rcv_spkt+0x46/0xe8
[ 4822.477428] [<ffffffff8128ccb3>] ? __netif_receive_skb+0x3c0/0x428
[ 4822.483756] [<ffffffff8128e66a>] ? netif_receive_skb+0x63/0x69
[ 4822.489734] [<ffffffff8128eb3c>] ? napi_gro_receive+0x1d/0x2b
[ 4822.495618] [<ffffffff8128e6e6>] ? napi_skb_finish+0x1c/0x31
[ 4822.501433] [<ffffffffa0044042>] ? tg3_poll_work+0x5ec/0x9d2 [tg3]
[ 4822.507757] [<ffffffffa0044657>] ? tg3_poll+0x181/0x24d [tg3]
[ 4822.513646] [<ffffffff8128ec5a>] ? net_rx_action+0xa1/0x1af
[ 4822.519365] [<ffffffff812438e9>] ? add_interrupt_randomness+0x38/0x155
[ 4822.526040] [<ffffffff8104c094>] ? __do_softirq+0xb9/0x177
[ 4822.531663] [<ffffffff81354c2c>] ? call_softirq+0x1c/0x30
[ 4822.537212] [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[ 4822.542573] [<ffffffff8104c2fc>] ? irq_exit+0x3c/0x9a
[ 4822.547766] [<ffffffff81027a01>] ? native_apic_msr_read+0xf/0x27
[ 4822.553922] [<ffffffff8100f60d>] ? do_IRQ+0x82/0x98
[ 4822.558946] [<ffffffff8134dcee>] ? common_interrupt+0x6e/0x6e
[ 4822.564830] <EOI> [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.233 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.46 BogoMIPS (lpj=9332932)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020043] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.032532] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043134] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.045478] Mount-cache hash table entries: 256
[ 0.048139] Initializing cgroup subsys cpuacct
[ 0.052009] Initializing cgroup subsys memory
[ 0.056017] Initializing cgroup subsys devices
[ 0.060007] Initializing cgroup subsys freezer
[ 0.064006] Initializing cgroup subsys net_cls
[ 0.068006] Initializing cgroup subsys blkio
[ 0.072012] Initializing cgroup subsys perf_event
[ 0.076037] CPU: Physical Processor ID: 0
[ 0.080006] CPU: Processor Core ID: 0
[ 0.084007] mce: CPU supports 6 MCE banks
[ 0.088013] CPU0: Thermal monitoring enabled (TM2)
[ 0.092009] using mwait in idle threads.
[ 0.096451] ACPI: Core revision 20110623
[ 0.112218] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157965] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.168009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.170982] ... version: 2
[ 0.172011] ... bit width: 40
[ 0.176011] ... generic registers: 2
[ 0.180011] ... value mask: 000000ffffffffff
[ 0.184011] ... max period: 000000007fffffff
[ 0.188011] ... fixed-purpose events: 3
[ 0.192012] ... event mask: 0000000700000003
[ 0.196215] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.200146] Booting Node 0, Processors #1
[ 0.300048] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.304152] #2
[ 0.400045] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.404147] #3 Ok.
[ 0.500049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.504062] Brought up 4 CPUs
[ 0.508034] Total of 4 processors activated (18664.70 BogoMIPS).
[ 0.516221] devtmpfs: initialized
[ 0.524569] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.528197] print_constraints: dummy:
[ 0.532121] NET: Registered protocol family 16
[ 0.536131] ACPI: bus type pci registered
[ 0.540097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.544035] PCI: not using MMCONFIG
[ 0.548035] PCI: Using configuration type 1 for base access
[ 0.552792] bio: create slab <bio-0> at 0
[ 0.556121] ACPI: Added _OSI(Module Device)
[ 0.560037] ACPI: Added _OSI(Processor Device)
[ 0.564036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.568037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.577508] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.583085] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.588503] ACPI: Dynamic OEM Table Load:
[ 0.594320] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.600564] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.604502] ACPI: Dynamic OEM Table Load:
[ 0.608272] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.616564] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.624508] ACPI: Dynamic OEM Table Load:
[ 0.630313] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.640281] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.644507] ACPI: Dynamic OEM Table Load:
[ 0.648272] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.653290] ACPI: Interpreter enabled
[ 0.656045] ACPI: (supports S0 S3 S4 S5)
[ 0.661305] ACPI: Using IOAPIC for interrupt routing
[ 0.664063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.670399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.707317] ACPI: No dock devices found.
[ 0.708046] HEST: Table not found.
[ 0.712047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.716130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.720224] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.724047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.728047] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.732047] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.736047] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.740075] DMAR: Forcing write-buffer flush capability
[ 0.744047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.749643] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.752054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.756087] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.760425] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.764059] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.768294] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.772060] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.776296] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.780057] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.784549] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.788513] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.792052] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.796050] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.813321] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.820333] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.824780] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.832470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.838705] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.843013] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.847015] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.852336] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.860095] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864057] vgaarb: loaded
[ 0.866804] vgaarb: bridge control possible 0000:06:00.0
[ 0.868101] PCI: Using ACPI for IRQ routing
[ 0.877991] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.880059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.885453] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.900155] Switching to clocksource hpet
[ 0.905935] pnp: PnP ACPI init
[ 0.909054] ACPI: bus type pnp registered
[ 0.913372] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.920041] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.929041] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.935015] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.940992] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.947312] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.953976] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.960641] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.967532] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.974547] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.981509] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.987483] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.994173] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 1.000145] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.006202] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.013140] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.020158] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.027175] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.034190] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.041207] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.048353] pnp: PnP ACPI: found 14 devices
[ 1.052593] ACPI: ACPI bus type pnp unregistered
[ 1.066047] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.073951] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.081854] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.089746] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.096673] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.104568] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.110798] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.116075] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.122225] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.129070] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.134344] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.140493] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.147338] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.155149] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.160430] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.166583] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.173425] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.181239] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.186519] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.192665] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.199503] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.207312] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.212586] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.218735] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.225573] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.233384] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.240678] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.245953] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.252865] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.259703] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.267531] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.273474] NET: Registered protocol family 2
[ 1.278127] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.286859] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.297383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.304523] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.311191] TCP reno registered
[ 1.314396] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.320598] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.327377] NET: Registered protocol family 1
[ 1.332107] Unpacking initramfs...
[ 1.605355] Freeing initrd memory: 14072k freed
[ 1.614175] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.620729] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.628572] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.634844] audit: initializing netlink socket (disabled)
[ 1.640325] type=2000 audit(1369331300.640:1): initialized
[ 1.658663] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.666520] VFS: Disk quotas dquot_6.5.2
[ 1.670538] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.677117] msgmni has been set to 16007
[ 1.681386] alg: No test for stdrng (krng)
[ 1.685591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.693054] io scheduler noop registered
[ 1.708851] io scheduler deadline registered
[ 1.713205] io scheduler cfq registered (default)
[ 1.718514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.724160] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.730829] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.737662] ERST: Table is not found!
[ 1.741382] GHES: HEST is not enabled!
[ 1.745262] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.771897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.864482] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.870476] Linux agpgart interface v0.103
[ 1.874886] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.881727] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.892187] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.897348] mousedev: PS/2 mouse device common for all mice
[ 1.903015] rtc_cmos 00:03: RTC can wake from S4
[ 1.907818] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.914013] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.920888] cpuidle: using governor ladder
[ 1.925040] cpuidle: using governor menu
[ 1.929091] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.929220] TCP cubic registered
[ 1.941129] NET: Registered protocol family 10
[ 1.946127] Mobile IPv6
[ 1.948630] NET: Registered protocol family 17
[ 1.953127] Registering the dns_resolver key type
[ 1.958094] registered taskstats version 1
[ 1.963146] rtc_cmos 00:03: setting system clock to 2013-05-23 17:48:22 UTC (1369331302)
[ 1.971341] Initializing network drop monitor service
[ 1.977854] Freeing unused kernel memory: 576k freed
[ 1.982995] Write protecting the kernel read-only data: 6144k
[ 1.991360] Freeing unused kernel memory: 660k freed
[ 1.999077] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.015706] udevd[58]: starting version 175
[ 2.029476] usbcore: registered new interface driver usbfs
[ 2.045191] SCSI subsystem initialized
[ 2.060310] usbcore: registered new interface driver hub
[ 2.067356] tg3.c:v3.121 (November 2, 2011)
[ 2.072618] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.079314] ahci: SSS flag set, parallel bus scan disabled
[ 2.084938] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.093195] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.101396] scsi0 : pata_jmicron
[ 2.105305] usbcore: registered new device driver usb
[ 2.105653] scsi1 : pata_jmicron
[ 2.106139] ata1: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.106142] ata2: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.116477] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c76000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 46
[ 2.116480] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.116497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.117130] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c78000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 47
[ 2.117133] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.156803] scsi2 : ahci
[ 2.156909] scsi3 : ahci
[ 2.157005] scsi4 : ahci
[ 2.157100] scsi5 : ahci
[ 2.157199] scsi6 : ahci
[ 2.157297] scsi7 : ahci
[ 2.157471] ata3: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 45
[ 2.157474] ata4: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 45
[ 2.157477] ata5: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 45
[ 2.157479] ata6: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 45
[ 2.157482] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 45
[ 2.157484] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 45
[ 2.157555] ahci 0000:03:00.0: JMB361 has only one port
[ 2.157569] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.172050] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.172054] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.172412] scsi8 : ahci
[ 2.172515] scsi9 : ahci
[ 2.172608] ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 2.172610] ata10: DUMMY
[ 2.272824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.279482] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.279703] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.280456] scsi10 : sata_mv
[ 2.280533] scsi11 : sata_mv
[ 2.280595] scsi12 : sata_mv
[ 2.280660] scsi13 : sata_mv
[ 2.280710] ata11: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.280714] ata12: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.280717] ata13: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.280719] ata14: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.288357] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 2.288360] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.288363] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.288365] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.370658] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.378447] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.387134] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.408021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.413859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.420701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.427992] usb usb1: Product: EHCI Host Controller
[ 2.432936] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.439026] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.443817] hub 1-0:1.0: USB hub found
[ 2.447622] hub 1-0:1.0: 6 ports detected
[ 2.451797] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.457085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.464572] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.473046] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.480029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.486848] ata3.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 2.492023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.492038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.492041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.492043] usb usb2: Product: EHCI Host Controller
[ 2.492044] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.492046] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.492143] hub 2-0:1.0: USB hub found
[ 2.492147] hub 2-0:1.0: 6 ports detected
[ 2.536519] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.540058] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.549716] ata3.00: configured for UDMA/133
[ 2.554138] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 2.580676] scsi14 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.580677] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.580678] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.580679]
[ 2.604669] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.611455] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.617014] scsi 14:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 2.625376] scsi14:A:0:0: Tagged Queuing enabled. Depth 8
[ 2.643072] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.650571] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.656406] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.663252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.670552] usb usb3: Product: UHCI Host Controller
[ 2.675492] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.681563] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.686240] scsi target14:0:0: Beginning Domain Validation
[ 2.691924] hub 3-0:1.0: USB hub found
[ 2.695743] hub 3-0:1.0: 2 ports detected
[ 2.699906] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.705223] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.712734] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.718596] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.725455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.732773] usb usb4: Product: UHCI Host Controller
[ 2.737727] scsi target14:0:0: wide asynchronous
[ 2.742449] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.748538] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.753354] hub 4-0:1.0: USB hub found
[ 2.757186] hub 4-0:1.0: 2 ports detected
[ 2.761369] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.764063] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.772994] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.776447] ata11.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.776449] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.793545] scsi target14:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 2.796453] ata11.00: configured for UDMA/133
[ 2.805855] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.811708] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.811746] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.811750] Switching to clocksource tsc
[ 2.828400] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.835691] usb usb5: Product: UHCI Host Controller
[ 2.840619] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.846681] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.851426] scsi15 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.851427] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.851428] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 2.851429]
[ 2.851492] hub 5-0:1.0: USB hub found
[ 2.851496] hub 5-0:1.0: 2 ports detected
[ 2.851574] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.851581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.851610] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.851646] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.851648] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.851650] usb usb6: Product: UHCI Host Controller
[ 2.851652] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.851653] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.851752] hub 6-0:1.0: USB hub found
[ 2.851756] hub 6-0:1.0: 2 ports detected
[ 2.851832] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.851839] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.851867] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.851899] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.851901] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.851903] usb usb7: Product: UHCI Host Controller
[ 2.851905] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.851906] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.852010] hub 7-0:1.0: USB hub found
[ 2.852013] hub 7-0:1.0: 2 ports detected
[ 2.852092] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.852100] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.852131] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.852164] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.852166] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.852168] usb usb8: Product: UHCI Host Controller
[ 2.852170] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.852171] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.852266] hub 8-0:1.0: USB hub found
[ 2.852269] hub 8-0:1.0: 2 ports detected
[ 2.884028] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.884602] ata4.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 2.884604] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.960016] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 3.075448] ata4.00: configured for UDMA/133
[ 3.079786] scsi target14:0:0: Ending Domain Validation
[ 3.079808] scsi: waiting for bus probes to complete ...
[ 3.093499] scsi 14:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.101850] scsi14:A:1:0: Tagged Queuing enabled. Depth 8
[ 3.107448] scsi target14:0:1: Beginning Domain Validation
[ 3.113835] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.120635] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.127847] usb 1-5: Product: AX88772
[ 3.131657] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.136619] usb 1-5: SerialNumber: 000001
[ 3.141105] scsi target14:0:1: wide asynchronous
[ 3.148313] scsi target14:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.160734] scsi target14:0:1: Ending Domain Validation
[ 3.168734] scsi 14:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.176992] scsi14:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.182594] scsi target14:0:2: Beginning Domain Validation
[ 3.191347] scsi target14:0:2: wide asynchronous
[ 3.198522] scsi target14:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.210932] scsi target14:0:2: Ending Domain Validation
[ 3.218290] scsi 14:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.226544] scsi14:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.232144] scsi target14:0:3: Beginning Domain Validation
[ 3.240610] scsi target14:0:3: wide asynchronous
[ 3.247519] scsi target14:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.252014] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.265478] scsi target14:0:3: Ending Domain Validation
[ 3.281240] scsi 14:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.289489] scsi14:A:4:0: Tagged Queuing enabled. Depth 8
[ 3.295065] scsi target14:0:4: Beginning Domain Validation
[ 3.304211] scsi target14:0:4: wide asynchronous
[ 3.311562] scsi target14:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.324324] scsi target14:0:4: Ending Domain Validation
[ 3.410403] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.417156] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.424340] usb 3-2: Product: USB-Serial Controller
[ 3.429265] usb 3-2: Manufacturer: Prolific Technology Inc.
[ 3.548009] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 3.586316] (scsi14:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.593420] (scsi14:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0)
[ 3.597403] Unexpected non-DT Data Phase
[ 3.606655] (scsi14:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.797593] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.804351] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.811540] usb 4-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.817858] usb 4-1: Manufacturer: American Power Conversion
[ 3.823566] usb 4-1: SerialNumber: 4B0742P97300
[ 6.920634] scsi 3:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 7.248015] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.255471] ata5.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 7.262490] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.270966] ata5.00: configured for UDMA/133
[ 7.275380] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 7.600015] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.618787] ata6.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 7.625037] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.632798] ata6.00: configured for UDMA/133
[ 7.637204] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 7.964013] ata7: SATA link down (SStatus 0 SControl 300)
[ 8.288013] ata8: SATA link down (SStatus 0 SControl 300)
[ 8.293621] scsi 10:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 8.776022] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.812047] ata12.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 8.819151] ata12.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.848043] ata12.00: configured for UDMA/133
[ 8.852535] scsi 11:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 9.336022] ata13: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.404043] ata13.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 9.409845] ata13.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.496043] ata13.00: configured for UDMA/133
[ 9.500527] scsi 12:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 9.984022] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.012306] ata14.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 10.018457] ata14.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 10.032307] ata14.00: configured for UDMA/133
[ 10.036791] scsi 13:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 10.056691] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.062872] sd 3:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.062874] sd 3:0:0:0: [sdg] 4096-byte physical blocks
[ 10.062879] sd 4:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.062924] sd 3:0:0:0: [sdg] Write Protect is off
[ 10.062929] sd 4:0:0:0: [sdh] Write Protect is off
[ 10.062948] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.062953] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.063321] sd 5:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.063324] sd 5:0:0:0: [sdi] 4096-byte physical blocks
[ 10.063373] sd 5:0:0:0: [sdi] Write Protect is off
[ 10.063396] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.063643] sd 10:0:0:0: [sdj] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 10.063696] sd 10:0:0:0: [sdj] Write Protect is off
[ 10.063693] sd 11:0:0:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 10.063720] sd 10:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.063740] sd 11:0:0:0: [sdk] Write Protect is off
[ 10.063765] sd 11:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.064141] sd 12:0:0:0: [sdl] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 10.064169] sd 13:0:0:0: [sdm] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 10.064194] sd 12:0:0:0: [sdl] Write Protect is off
[ 10.064219] sd 12:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.064231] sd 13:0:0:0: [sdm] Write Protect is off
[ 10.064254] sd 13:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.064617] sdh: sdh1
[ 10.070776] sdm: sdm1
[ 10.112026] sdj: sdj1
[ 10.234874] sdg: sdg1
[ 10.234881] sdi: sdi1
[ 10.234972] sdl: sdl1
[ 10.234977] sdk: sdk1
[ 10.234988] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 10.235116] sd 2:0:0:0: [sda] Write Protect is off
[ 10.235139] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.235329] sd 13:0:0:0: [sdm] Attached SCSI disk
[ 10.235457] sd 14:0:4:0: [sdf] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 10.240732] sd 10:0:0:0: [sdj] Attached SCSI disk
[ 10.280881] sda: sda1
[ 10.280908] sd 14:0:0:0: [sdb] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 10.280960] sd 14:0:4:0: [sdf] Write Protect is off
[ 10.281039] sd 12:0:0:0: [sdl] Attached SCSI disk
[ 10.281131] sd 4:0:0:0: [sdh] Attached SCSI disk
[ 10.281176] sd 11:0:0:0: [sdk] Attached SCSI disk
[ 10.310055] sd 14:0:1:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 10.310151] sd 14:0:2:0: [sdd] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 10.310166] sd 14:0:3:0: [sde] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 10.310332] sd 5:0:0:0: [sdi] Attached SCSI disk
[ 10.310420] sd 3:0:0:0: [sdg] Attached SCSI disk
[ 10.311022] sd 14:0:4:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.351070] sd 14:0:3:0: [sde] Write Protect is off
[ 10.351081] sd 14:0:0:0: [sdb] Write Protect is off
[ 10.351099] sd 14:0:2:0: [sdd] Write Protect is off
[ 10.351258] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 10.351346] sd 14:0:0:0: Attached scsi generic sg1 type 0
[ 10.351404] sd 14:0:1:0: Attached scsi generic sg2 type 0
[ 10.351463] sd 14:0:2:0: Attached scsi generic sg3 type 0
[ 10.351520] sd 14:0:3:0: Attached scsi generic sg4 type 0
[ 10.351575] sd 14:0:4:0: Attached scsi generic sg5 type 0
[ 10.351629] sd 3:0:0:0: Attached scsi generic sg6 type 0
[ 10.351681] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 10.351735] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 10.351791] sd 10:0:0:0: Attached scsi generic sg9 type 0
[ 10.351844] sd 11:0:0:0: Attached scsi generic sg10 type 0
[ 10.351899] sd 12:0:0:0: Attached scsi generic sg11 type 0
[ 10.351954] sd 13:0:0:0: Attached scsi generic sg12 type 0
[ 10.436705] sd 14:0:1:0: [sdc] Write Protect is off
[ 10.441674] sd 14:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.441688] sd 14:0:2:0: [sdd] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.441833] sd 2:0:0:0: [sda] Attached SCSI disk
[ 10.465555] sd 14:0:1:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.465699] sd 14:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 10.483578] sdf: sdf1 sdf2
[ 10.486503] sdd: sdd1 sdd2
[ 10.492415] sdb: sdb1 sdb2
[ 10.495317] sdc: sdc1 sdc2
[ 10.495386] sde: sde1 sde2
[ 10.501071] sd 14:0:2:0: [sdd] Attached SCSI disk
[ 10.501076] sd 14:0:4:0: [sdf] Attached SCSI disk
[ 10.515269] sd 14:0:0:0: [sdb] Attached SCSI disk
[ 10.515733] sd 14:0:1:0: [sdc] Attached SCSI disk
[ 10.528323] sd 14:0:3:0: [sde] Attached SCSI disk
[ 11.739747] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 11.755692] usbcore: registered new interface driver usbhid
[ 11.761320] usbhid: USB HID core driver
Begin: Loading essential drivers[ 12.206138] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 12.215494] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.227620] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 12.235885] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.244300] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.256412] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 12.264680] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.273085] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.285186] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 12.293446] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.301896] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.313963] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 12.334183] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 12.629616] md: md0 stopped.
[ 12.652297] md: bind<sdc1>
[ 12.655364] md: bind<sdb1>
[ 12.659398] md: raid1 personality registered for level 1
[ 12.665047] bio: create slab <bio-1> at 1
[ 12.669215] md/raid1:md0: active with 2 out of 2 mirrors
[ 12.674612] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 12.681711] md0:
has been started with 2 drives.
[ 13.027666] md: md1 stopped.
[ 13.049727] md: bind<sdf1>
[ 13.061199] md: bind<sdd1>
[ 13.065084] md/raid1:md1: active with 2 out of 2 mirrors
[ 13.070485] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 13.095404] md1: unknown partition table
[ 13.272270] md: md10 stopped.
[ 13.276017] md: bind<sdl1>
[ 13.278946] md: bind<sdk1>
[ 13.282886] md/raid1:md10: active with 2 out of 2 mirrors
[ 13.288377] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 13.296540] md10: unknown partition table
d with 2 drives.
[ 13.339190] md: md9 stopped.
[ 13.342804] md: bind<sdm1>
[ 13.345748] md: bind<sdj1>
[ 13.349691] md/raid1:md9: active with 2 out of 2 mirrors
[ 13.355108] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 13.377605] md9: unknown partition table
[ 13.422461] md: md3 stopped.
[ 13.426026] md: bind<sdh1>
[ 13.428939] md: bind<sda1>
[ 13.432871] md/raid1:md3: active with 2 out of 2 mirrors
[ 13.438260] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started[ 13.445972] md3: unknown partition table
with 2 drives.
[ 13.497387] md: md4 stopped.
[ 13.501055] md: bind<sdi1>
[ 13.503967] md: bind<sdg1>
[ 13.507824] md/raid1:md4: active with 2 out of 2 mirrors
[ 13.513233] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 13.520810] md4: unknown partition table
with 2 drives.
[ 13.896162] md: md6 stopped.
[ 13.900228] md: bind<sde2>
[ 13.903311] md: bind<sdb2>
[ 13.907220] md/raid1:md6: active with 2 out of 2 mirrors
[ 13.912633] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 13.920178] md6: unknown partition table
with 2 drives.
[ 14.119055] md: md7 stopped.
[ 14.131171] md: bind<sdc2>
[ 14.134306] md: bind<sdf2>
[ 14.138230] md/raid1:md7: not clean -- starting background reconstruction
[ 14.145092] md/raid1:md7: active with 2 out of 2 mirrors
[ 14.150491] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 14.176889] md7: unknown partition table
[ 14.378809] md: md8 stopped.
[ 14.398916] md: bind<md7>
[ 14.401812] md: bind<md6>
[ 14.405796] md: raid0 personality registered for level 0
[ 14.411642] md/raid0:md8: md_size is 566178176 sectors.
[ 14.416928] md: RAID0 configuration for md8 - 2 zones
[ 14.422032] md: zone0=[md6/md7]
[ 14.425370] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 14.433633] md: zone1=[md7]
[ 14.436578] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 14.444824]
[ 14.446370] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 14.453992] md8: unknown partition table
with 2 drives.[ 14.459409] device-mapper: uevent: version 1.0.3
Success: assemb[ 14.465467] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 14.659911] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 14.670686] EXT3-fs (md0): recovery required on readonly filesystem
[ 14.677018] EXT3-fs (md0): write access will be enabled during recovery
[ 15.316417] kjournald starting. Commit interval 5 seconds
[ 15.316439] EXT3-fs (md0): recovery complete
[ 15.335857] EXT3-fs (md0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 16.810661] udevd[552]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 16.954331] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 16.964352] ACPI: Requesting acpi_cpufreq
[ 16.968286] ACPI: Power Button [PWRB]
[ 16.974694] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.984609] ACPI: Power Button [PWRF]
[ 17.052372] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.072502] udevd[583]: renamed network interface eth1 to eth3
[ 17.092503] udevd[582]: renamed network interface eth0 to rename2
[ 17.108470] udevd[594]: renamed network interface eth2 to eth0
[ 17.142183] iTCO_vendor_support: vendor-support=0
[ 17.149537] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 17.159546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.172521] udevd[582]: renamed network interface rename2 to eth2
[ 17.178700] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 17.188158] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 17.195730] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.359113] usbcore: registered new interface driver usbserial
[ 17.365275] USB Serial support registered for generic
[ 17.388348] Error: Driver 'pcspkr' is already registered, aborting...
[ 17.553406] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 17.564341] usbcore: registered new interface driver asix
[ 17.564350] usbcore: registered new interface driver usbserial_generic
[ 17.564352] usbserial: USB Serial Driver core
[ 17.586734] USB Serial support registered for pl2303
[ 17.591823] pl2303 3-2:1.0: pl2303 converter detected
[ 17.608493] usb 3-2: pl2303 converter now attached to ttyUSB0
[ 17.614356] usbcore: registered new interface driver pl2303
[ 17.620014] pl2303: Prolific PL2303 USB to serial adaptor driver
done.
RAID status not OK. Exiting. ... failed!
Setting hostname to 'jack'...done.
Activating swap:swapon on /dev/md1
swapon: /dev[ 18.729442] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17945/122640 files, 111204/489952 blocks
.
[ 18.890682] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: recovering journal
[ 28.231557] md: resync of RAID array md7
[ 28.235563] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.241450] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 28.251069] md: using 128k window, over a total of 141677120k.
/dev/mapper/vg_foo-lv_home: clean, 979587/8519680 files, 26281904/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: recovering journal
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: recovering journal
/dev/mapper/vg_mirror-lv_mirror: clean, 1974176/244195328 files, 514582290/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: recovering journal
/dev/mapper/vg_share-lv_share: clean, 18875/91578368 files, 317393916/366284800 blocks
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp was not cleanly unmounted, check forced.
/dev/mapper/vg_foo-lv_tmp: | | 0.9% /dev/mapper/vg_foo-lv_tmp: |= / 2.6% /dev/mapper/vg_foo-lv_tmp: |= - 3.5% /dev/mapper/vg_foo-lv_tmp: |== \ 5.2% /dev/mapper/vg_foo-lv_tmp: |== | 6.1% /dev/mapper/vg_foo-lv_tmp: |=== / 7.0% /dev/mapper/vg_foo-lv_tmp: |==== - 8.8% /dev/mapper/vg_foo-lv_tmp: |==== \ 9.6% /dev/mapper/vg_foo-lv_tmp: |==== | 10.5% /dev/mapper/vg_foo-lv_tmp: |===== / 12.2% /dev/mapper/vg_foo-lv_tmp: |===== - 13.1% /dev/mapper/vg_foo-lv_tmp: |====== \ 14.9% /dev/mapper/vg_foo-lv_tmp: |======
| 15.8% /dev/mapper/vg_foo-lv_tmp: |======= / 17.5% /dev/mapper/vg_foo-lv_tmp: |======= - 18.4% /dev/mapper/vg_foo-lv_tmp: |======== \ 19.2% /dev/mapper/vg_foo-lv_tmp: |======== | 21.0% /dev/mapper/vg_foo-lv_tmp: |========= / 21.9% /dev/mapper/vg_foo-lv_tmp: |========= - 23.6% /dev/mapper/vg_foo-lv_tmp: |========== \ 24.5% /dev/mapper/vg_foo-lv_tmp: |=========== | 26.2% /dev/mapper/vg_foo-lv_tmp: |=========== / 27.1% /dev/mapper/vg_foo-lv_tmp: |============ - 28.9% /dev/mapper/vg_foo-lv_tmp: |============ \ 29.8% /dev/mapper/vg_foo-lv_tmp: |============ | 30.6% /dev/mapper/vg_foo-
lv_tmp: |============= / 32.4% /dev/mapper/vg_foo-lv_tmp: |============= - 33.2% /dev/mapper/vg_foo-lv_tmp: |============== \ 35.0% /dev/mapper/vg_foo-lv_tmp: |============== | 35.9% /dev/mapper/vg_foo-lv_tmp: |=============== / 37.6% /dev/mapper/vg_foo-lv_tmp: |=============== - 38.5% /dev/mapper/vg_foo-lv_tmp: |================ \ 39.4% /dev/mapper/vg_foo-lv_tmp: |================ | 40.2% /dev/mapper/vg_foo-lv_tmp: |================= / 42.0% /dev/mapper/vg_foo-lv_tmp: |================= - 42.9% /dev/mapper/vg_foo-lv_tmp: |================== \ 44.6% /dev/mapper/vg_foo-lv_tmp: |================== | 45.5% /dev/mapper/vg_foo-lv_tmp: |===================
/ 47.2% /dev/mapper/vg_foo-lv_tmp: |=================== - 48.1% /dev/mapper/vg_foo-lv_tmp: |==================== \ 49.0% /dev/mapper/vg_foo-lv_tmp: |==================== | 49.9% /dev/mapper/vg_foo-lv_tmp: |===================== / 51.6% /dev/mapper/vg_foo-lv_tmp: |===================== - 52.5% /dev/mapper/vg_foo-lv_tmp: |====================== \ 54.2% /dev/mapper/vg_foo-lv_tmp: |====================== | 55.1% /dev/mapper/vg_foo-lv_tmp: |====================== / 56.0% /dev/mapper/vg_foo-lv_tmp: |======================= - 57.8% /dev/mapper/vg_foo-lv_tmp: |======================= \ 58.6% /dev/mapper/vg_foo-lv_tmp: |======================== | 59.5% /dev/mapper/vg_foo-lv_tmp: |======================== / 60.4% /dev/mapper/vg_foo-lv_tmp: |==========
=============== - 61.2% /dev/mapper/vg_foo-lv_tmp: |========================= \ 63.0% /dev/mapper/vg_foo-lv_tmp: |========================== | 63.9% /dev/mapper/vg_foo-lv_tmp: |========================== / 64.8% /dev/mapper/vg_foo-lv_tmp: |========================== - 65.6% /dev/mapper/vg_foo-lv_tmp: |=========================== \ 67.4% /dev/mapper/vg_foo-lv_tmp: |=========================== | 68.2% /dev/mapper/vg_foo-lv_tmp: |============================ / 69.1% /dev/mapper/vg_foo-lv_tmp: |============================ - 70.0% /dev/mapper/vg_foo-lv_tmp: |====================================== \ 95.1% /dev/mapper/vg_foo-lv_tmp: |====================================== | 95.5% /dev/mapper/vg_foo-lv_tmp: |======================================= / 97.2% /dev/mapper/vg_foo-lv_tmp: |========================================| 100.0%
/dev/mapper/vg_foo-lv_tmp: 15/655360 files (6.7% non-contiguous), 46899/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: recovering journal
/dev/mapper/vg_foo-lv_var64: clean, 17894/655360 files, 1386232/2621440 blocks
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: recovering journal
/dev/mapper/vg_foo-lv_usr64: clean, 277592/458752 files, 1519326/1835008 blocks (check in 5 mounts)
fsck died with exit status 1
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 44.137170] kjournald starting. Commit interval 5 seconds
[ 44.153644] EXT3-fs (dm-4): using internal journal
[ 44.158499] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 44.196340] kjournald starting. Commit interval 5 seconds
[ 44.208036] EXT3-fs (dm-3): using internal journal
[ 44.212880] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 44.301168] kjournald starting. Commit interval 5 seconds
[ 44.317953] EXT3-fs (dm-1): using internal journal
[ 44.322807] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 44.357675] kjournald starting. Commit interval 5 seconds
[ 44.363655] EXT3-fs (dm-2): using internal journal
[ 44.368510] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 44.729610] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 44.818733] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
[ 45.390046] fuse init (API version 7.17)
failed!
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Initializing random number generator...[ ok done.
[....] Configuring network interfaces...[ 47.221682] tg3 0000:06:02.0: firmware: agent loaded tigon/tg3_tso.bin into memory
[ 47.282196] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.502976] tg3 0000:06:02.0: eth0: Link is up at 1000 Mbps, full duplex
[ 50.506215] tg3 0000:06:02.0: eth0: Flow control is off for TX and off for RX
[ 50.506215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.667614] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 78.685977] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 78.692846] asix 1-5:1.0: eth1: link down
[ 80.351413] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 88.788621] r8169 0000:04:00.0: eth2: link down
[ 88.792620] r8169 0000:04:00.0: eth2: link down
[ 88.799287] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 90.433868] r8169 0000:04:00.0: eth2: link up
[ 90.437854] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 99.211938] PPP generic driver version 2.4.2
[ 99.725514] NET: Registered protocol family 24
[ 100.800734] u32 classifier
[ 100.803495] Performance counters on
[ 100.819450] input device check on
[ 100.823165] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 110.137181] RPC: Registered named UNIX socket transport module.
[ 110.143185] RPC: Registered udp transport module.
[ 110.147965] RPC: Registered tcp transport module.
[ 110.152725] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 110.231682] FS-Cache: Loaded
[ 110.297440] FS-Cache: Netfs 'nfs' registered for caching
[ 110.349769] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
[....] Starting filesystem in userspace: fuse[ ok .
Loading the saved-state of the serial devices...
Recovering nvi editor sessions...none found.
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
[....] Setting sensors limits[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
Starting gmediaserver: Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] Starting domain name service...: bind9[ ok .
[....] Starting automount...[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
[....] Starting User-mode networking switch: uml_switch[ ok .
[....] Starting web server: apache2httpd (pid 2905) already running
[ ok .
[....] Starting NTP server: ntpd/etc/init.d/ntp: line 40: 4121 Terminated lockfile-touch $LOCKFILE
[ ok .
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[....] Starting periodic command scheduler: cron[ ok .
[....] Starting network benchmark server[ ok .
[ 114.914249] tun: Universal TUN/TAP device driver, 1.6
[ 114.919430] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting internet superserver: inetd[ ok .
[ 115.263217] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 115.279810] NFSD: starting 90-second grace period
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting system message bus: dbus[ ok .
[....] Starting authentication failure monitor: fail2ban[ ok .
[ 117.493511] ip_tables: (C) 2000-2006 Netfilter Core Team
Starting news server: done.
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting virtual private network daemon: server[ ok .
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
Configuring kernel parameters... done
[....] Starting System status server: rwhod[ ok .
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Starting HPA's tftpd: in.tftpd[ ok .
saned disabled; edit /etc/default/saned
[....] Starting MTA: exim4[ ok .
[ 119.725388] lp: driver loaded but no devices found
[ 119.778750] ppdev: user-space parallel port driver
[....] Starting rsync daemon: rsync[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 128.020108] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[....] Starting upnp media server: mediatomb[ ok .
Debian GNU/Linux 7.0 jack ttyS0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2332.851 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.70 BogoMIPS (lpj=9331404)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020043] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.032521] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043128] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.045476] Mount-cache hash table entries: 256
[ 0.048138] Initializing cgroup subsys cpuacct
[ 0.052010] Initializing cgroup subsys memory
[ 0.056017] Initializing cgroup subsys devices
[ 0.060007] Initializing cgroup subsys freezer
[ 0.064006] Initializing cgroup subsys net_cls
[ 0.068006] Initializing cgroup subsys blkio
[ 0.072011] Initializing cgroup subsys perf_event
[ 0.076037] CPU: Physical Processor ID: 0
[ 0.080006] CPU: Processor Core ID: 0
[ 0.083710] mce: CPU supports 6 MCE banks
[ 0.084013] CPU0: Thermal monitoring enabled (TM2)
[ 0.088009] using mwait in idle threads.
[ 0.092452] ACPI: Core revision 20110623
[ 0.104404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.149119] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.160009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.162984] ... version: 2
[ 0.164010] ... bit width: 40
[ 0.168010] ... generic registers: 2
[ 0.172011] ... value mask: 000000ffffffffff
[ 0.176011] ... max period: 000000007fffffff
[ 0.180011] ... fixed-purpose events: 3
[ 0.184011] ... event mask: 0000000700000003
[ 0.188214] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.192145] Booting Node 0, Processors #1
[ 0.292048] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.296150] #2
[ 0.392043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.396146] #3 Ok.
[ 0.492048] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.496061] Brought up 4 CPUs
[ 0.500033] Total of 4 processors activated (18663.97 BogoMIPS).
[ 0.508222] devtmpfs: initialized
[ 0.517416] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.524204] print_constraints: dummy:
[ 0.528089] NET: Registered protocol family 16
[ 0.532131] ACPI: bus type pci registered
[ 0.536096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.540035] PCI: not using MMCONFIG
[ 0.544035] PCI: Using configuration type 1 for base access
[ 0.552160] bio: create slab <bio-0> at 0
[ 0.556121] ACPI: Added _OSI(Module Device)
[ 0.560037] ACPI: Added _OSI(Processor Device)
[ 0.564036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.568037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.578381] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.587087] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.592506] ACPI: Dynamic OEM Table Load:
[ 0.596273] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.600559] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.604506] ACPI: Dynamic OEM Table Load:
[ 0.610312] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.616561] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.624506] ACPI: Dynamic OEM Table Load:
[ 0.630313] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.640325] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.644505] ACPI: Dynamic OEM Table Load:
[ 0.648274] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.653285] ACPI: Interpreter enabled
[ 0.656045] ACPI: (supports S0 S3 S4 S5)
[ 0.661305] ACPI: Using IOAPIC for interrupt routing
[ 0.664063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.670397] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.704100] ACPI: No dock devices found.
[ 0.708045] HEST: Table not found.
[ 0.711492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.712130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.716224] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.720047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.724047] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.728046] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.732047] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.736074] DMAR: Forcing write-buffer flush capability
[ 0.740047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.748235] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.752054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.756087] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.760423] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.764063] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.768294] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.772056] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.776296] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.780057] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.788338] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.792516] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.796053] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.800050] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.814134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.821098] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.824786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.833406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.840783] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.848335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.855014] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.856872] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.864843] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.868057] vgaarb: loaded
[ 0.870809] vgaarb: bridge control possible 0000:06:00.0
[ 0.872100] PCI: Using ACPI for IRQ routing
[ 0.882821] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.884059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.892057] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.912128] Switching to clocksource hpet
[ 0.917939] pnp: PnP ACPI init
[ 0.921052] ACPI: bus type pnp registered
[ 0.925374] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.932042] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.941043] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.947027] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.953004] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.959322] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.965986] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.972653] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.979550] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.986572] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.993538] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.999517] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 1.005490] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 1.011466] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.017526] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.024464] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.031487] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.038505] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.045525] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.052543] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.059696] pnp: PnP ACPI: found 14 devices
[ 1.063938] ACPI: ACPI bus type pnp unregistered
[ 1.077388] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.085295] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.093198] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.101099] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.108025] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.115921] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.122151] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.127425] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.133576] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.140422] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.146424] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.152571] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.159409] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.167219] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.172493] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.178640] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.185478] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.193289] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.198572] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.204718] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.211556] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.219366] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.224643] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.230787] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.237628] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.245447] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.252742] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.258024] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.264176] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.271019] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.278847] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.284787] NET: Registered protocol family 2
[ 1.289450] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.298189] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.308704] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.315835] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.322508] TCP reno registered
[ 1.325713] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.331914] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.338698] NET: Registered protocol family 1
[ 1.343415] Unpacking initramfs...
[ 1.616658] Freeing initrd memory: 14072k freed
[ 1.625482] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.632040] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.639886] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.646153] audit: initializing netlink socket (disabled)
[ 1.651628] type=2000 audit(1369353029.648:1): initialized
[ 1.669982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.677845] VFS: Disk quotas dquot_6.5.2
[ 1.681863] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.688432] msgmni has been set to 16007
[ 1.692689] alg: No test for stdrng (krng)
[ 1.696897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.704360] io scheduler noop registered
[ 1.720104] io scheduler deadline registered
[ 1.724460] io scheduler cfq registered (default)
[ 1.729771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.735415] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.742089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.748928] ERST: Table is not found!
[ 1.752645] GHES: HEST is not enabled!
[ 1.756521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.783158] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.876482] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.882478] Linux agpgart interface v0.103
[ 1.886893] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.893740] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.904196] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.909357] mousedev: PS/2 mouse device common for all mice
[ 1.915030] rtc_cmos 00:03: RTC can wake from S4
[ 1.919827] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.926024] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.932898] cpuidle: using governor ladder
[ 1.937049] cpuidle: using governor menu
[ 1.941103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.941230] TCP cubic registered
[ 1.953138] NET: Registered protocol family 10
[ 1.958138] Mobile IPv6
[ 1.960637] NET: Registered protocol family 17
[ 1.965138] Registering the dns_resolver key type
[ 1.970103] registered taskstats version 1
[ 1.975156] rtc_cmos 00:03: setting system clock to 2013-05-23 23:50:31 UTC (1369353031)
[ 1.983354] Initializing network drop monitor service
[ 1.989867] Freeing unused kernel memory: 576k freed
[ 1.995014] Write protecting the kernel read-only data: 6144k
[ 2.003381] Freeing unused kernel memory: 660k freed
[ 2.011096] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.027706] udevd[58]: starting version 175
[ 2.042088] usbcore: registered new interface driver usbfs
[ 2.047867] SCSI subsystem initialized
[ 2.065258] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.075845] usbcore: registered new interface driver hub
[ 2.082025] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.089911] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c74000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 45
[ 2.094605] usbcore: registered new device driver usb
[ 2.105526] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.106594] scsi0 : sata_mv
[ 2.117094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.117296] ahci: SSS flag set, parallel bus scan disabled
[ 2.117352] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.117356] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.117515] scsi1 : sata_mv
[ 2.117702] scsi2 : sata_mv
[ 2.117771] scsi3 : sata_mv
[ 2.117818] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.117826] ata1: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.117829] ata2: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.117832] ata3: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.117835] ata4: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.118924] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c78000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 47
[ 2.118926] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.160626] scsi4 : ahci
[ 2.160697] scsi5 : ahci
[ 2.160765] scsi6 : ahci
[ 2.160831] scsi7 : ahci
[ 2.160896] scsi8 : ahci
[ 2.160961] scsi9 : ahci
[ 2.161135] ata5: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 46
[ 2.161139] ata6: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 46
[ 2.161141] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 46
[ 2.161145] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 46
[ 2.161147] ata9: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 46
[ 2.161150] ata10: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 46
[ 2.270671] ahci 0000:03:00.0: JMB361 has only one port
[ 2.271007] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.271035] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.271081] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.274983] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.288032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.288075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.288077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.288079] usb usb1: Product: EHCI Host Controller
[ 2.288080] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.288082] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.334577] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.336365] hub 1-0:1.0: USB hub found
[ 2.336370] hub 1-0:1.0: 6 ports detected
[ 2.347980] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.353298] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.353304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.353341] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.357400] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.372017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.372040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.372043] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.372045] usb usb2: Product: EHCI Host Controller
[ 2.372046] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.372048] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.372162] hub 2-0:1.0: USB hub found
[ 2.372166] hub 2-0:1.0: 6 ports detected
[ 2.376059] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.376062] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.376461] scsi10 : ahci
[ 2.376570] scsi11 : ahci
[ 2.376671] ata11: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 2.376673] ata12: DUMMY
[ 2.450614] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.450994] scsi12 : pata_jmicron
[ 2.451073] scsi13 : pata_jmicron
[ 2.451519] ata13: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.451521] ata14: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.478009] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.485515] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.488031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.497596] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.497783] ata5.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 2.497786] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.517862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.518060] ata5.00: configured for UDMA/133
[ 2.529474] usb usb3: Product: UHCI Host Controller
[ 2.534407] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.540467] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.545249] hub 3-0:1.0: USB hub found
[ 2.549056] hub 3-0:1.0: 2 ports detected
[ 2.553214] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.558500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.565992] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.571816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.590544] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.596046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.604118] usb usb4: Product: UHCI Host Controller
[ 2.604429] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.604431] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.612445] ata1.00: configured for UDMA/133
[ 2.626273] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.628109] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 2.640507] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.644025] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.644029] Switching to clocksource tsc
[ 2.660590] scsi14 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.660591] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.660592] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.660593]
[ 2.660628] hub 4-0:1.0: USB hub found
[ 2.660632] hub 4-0:1.0: 2 ports detected
[ 2.660716] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.660725] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.660767] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.660803] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.660805] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.660807] usb usb5: Product: UHCI Host Controller
[ 2.660808] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.660810] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.660908] hub 5-0:1.0: USB hub found
[ 2.660912] hub 5-0:1.0: 2 ports detected
[ 2.660986] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.660993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.661022] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.661057] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.661059] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.661061] usb usb6: Product: UHCI Host Controller
[ 2.661062] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.661064] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.661157] hub 6-0:1.0: USB hub found
[ 2.661160] hub 6-0:1.0: 2 ports detected
[ 2.661239] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.661245] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.661274] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.661306] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.661308] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.661310] usb usb7: Product: UHCI Host Controller
[ 2.661312] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.661313] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.661405] hub 7-0:1.0: USB hub found
[ 2.661409] hub 7-0:1.0: 2 ports detected
[ 2.661481] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.661488] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.661516] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.661550] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.661553] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.661554] usb usb8: Product: UHCI Host Controller
[ 2.661556] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.661558] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.661650] hub 8-0:1.0: USB hub found
[ 2.661654] hub 8-0:1.0: 2 ports detected
[ 2.916085] ata11: SATA link down (SStatus 0 SControl 300)
[ 2.916850] scsi 14:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 2.916856] scsi14:A:0:0: Tagged Queuing enabled. Depth 8
[ 2.916863] scsi target14:0:0: Beginning Domain Validation
[ 2.943870] scsi target14:0:0: wide asynchronous
[ 2.951126] scsi target14:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 2.963574] scsi target14:0:0: Ending Domain Validation
[ 2.971591] scsi 14:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 2.979845] scsi14:A:1:0: Tagged Queuing enabled. Depth 8
[ 2.985451] scsi target14:0:1: Beginning Domain Validation
[ 2.994283] scsi target14:0:1: wide asynchronous
[ 3.001507] scsi target14:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.013869] scsi target14:0:1: Ending Domain Validation
[ 3.021906] scsi 14:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.028013] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 3.036729] scsi14:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.042318] scsi target14:0:2: Beginning Domain Validation
[ 3.051135] scsi target14:0:2: wide asynchronous
[ 3.058339] scsi target14:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.070693] scsi target14:0:2: Ending Domain Validation
[ 3.078110] scsi 14:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.086358] scsi14:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.091943] scsi target14:0:3: Beginning Domain Validation
[ 3.100443] scsi target14:0:3: wide asynchronous
[ 3.107402] scsi target14:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.118855] scsi target14:0:3: Ending Domain Validation
[ 3.124114] scsi15 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 3.124119] <Adaptec 3960D Ultra160 SCSI adapter>
[ 3.124120] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 3.124122]
[ 3.159443] scsi 14:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.167707] scsi14:A:4:0: Tagged Queuing enabled. Depth 8
[ 3.173314] scsi target14:0:4: Beginning Domain Validation
[ 3.180058] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.185295] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.185298] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.185300] usb 1-5: Product: AX88772
[ 3.185301] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.185303] usb 1-5: SerialNumber: 000001
[ 3.214249] scsi target14:0:4: wide asynchronous
[ 3.221603] scsi target14:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.234332] scsi target14:0:4: Ending Domain Validation
[ 3.244044] ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 3.251057] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.280043] ata2.00: configured for UDMA/133
[ 3.284382] scsi: waiting for bus probes to complete ...
[ 3.320012] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.486596] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.493361] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.500578] usb 3-2: Product: USB-Serial Controller
[ 3.500643] (scsi14:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.512536] (scsi14:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a7) SCSIRATE(0x0)
[ 3.516518] Unexpected non-DT Data Phase
[ 3.525511] usb 3-2: Manufacturer: Prolific Technology Inc.
[ 3.531220] (scsi14:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.644013] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 3.899822] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.906589] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.913778] usb 4-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.920095] usb 4-1: Manufacturer: American Power Conversion
[ 3.925808] usb 4-1: SerialNumber: 4B0742P97300
[ 6.969573] scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 7.452022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.512044] ata3.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 7.517754] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.588043] ata3.00: configured for UDMA/133
[ 7.592452] scsi 2:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 8.076024] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.104306] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 8.110366] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.124307] ata4.00: configured for UDMA/133
[ 8.128719] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 8.137082] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 8.476014] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.482824] ata6.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 8.489063] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.496789] ata6.00: configured for UDMA/133
[ 8.501195] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 8.828014] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.835477] ata7.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 8.842497] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.850960] ata7.00: configured for UDMA/133
[ 8.855365] scsi 6:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 9.180014] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.186836] ata8.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 9.193074] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.200831] ata8.00: configured for UDMA/133
[ 9.205235] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 9.532013] ata9: SATA link down (SStatus 0 SControl 300)
[ 9.856013] ata10: SATA link down (SStatus 0 SControl 300)
[ 10.028455] tg3.c:v3.121 (November 2, 2011)
[ 10.036671] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 10.044443] sd 14:0:0:0: [sdb] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 10.044486] sd 0:0:0:0: [sda] Write Protect is off
[ 10.044507] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.048741] sd 1:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 10.048755] sd 2:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 10.048836] sd 1:0:0:0: [sdg] Write Protect is off
[ 10.048849] sd 2:0:0:0: [sdh] Write Protect is off
[ 10.048880] sd 2:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.048932] sd 1:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.051093] sd 5:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.051095] sd 5:0:0:0: [sdk] 4096-byte physical blocks
[ 10.051109] sd 4:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.051111] sd 4:0:0:0: [sdj] 4096-byte physical blocks
[ 10.051124] sd 3:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 10.051233] sd 5:0:0:0: [sdk] Write Protect is off
[ 10.051244] sd 3:0:0:0: [sdi] Write Protect is off
[ 10.051253] sd 4:0:0:0: [sdj] Write Protect is off
[ 10.051293] sd 5:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.051345] sd 3:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.051375] sd 4:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.051593] sd 7:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.051595] sd 7:0:0:0: [sdm] 4096-byte physical blocks
[ 10.051606] sd 6:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.051871] sd 6:0:0:0: [sdl] Write Protect is off
[ 10.051883] sd 7:0:0:0: [sdm] Write Protect is off
[ 10.052018] sd 6:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.052065] sd 7:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.059244] sdi: sdi1
[ 10.235865] sdm: sdm1
[ 10.238300] sd 14:0:1:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 10.238684] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.238724] sd 14:0:0:0: Attached scsi generic sg1 type 0
[ 10.238840] sd 14:0:1:0: Attached scsi generic sg2 type 0
[ 10.238880] sd 14:0:2:0: Attached scsi generic sg3 type 0
[ 10.238995] sd 14:0:3:0: Attached scsi generic sg4 type 0
[ 10.239033] sd 14:0:4:0: Attached scsi generic sg5 type 0
[ 10.239134] sd 1:0:0:0: Attached scsi generic sg6 type 0
[ 10.239174] sd 2:0:0:0: Attached scsi generic sg7 type 0
[ 10.239185] sdk: sdk1
[ 10.239223] sda: sda1
[ 10.239260] sdg: sdg1
[ 10.239450] sd 3:0:0:0: [sdi] Attached SCSI disk
[ 10.239491] sdl: sdl1
[ 10.239518] sdj: sdj1
[ 10.239548] sdh: sdh1
[ 10.242644] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 10.242648] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 10.242651] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 10.242653] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 10.344042] sd 14:0:3:0: [sde] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 10.344051] sd 14:0:2:0: [sdd] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 10.344756] sd 14:0:0:0: [sdb] Write Protect is off
[ 10.344790] sd 3:0:0:0: Attached scsi generic sg8 type 0
[ 10.344846] sd 4:0:0:0: Attached scsi generic sg9 type 0
[ 10.344884] sd 5:0:0:0: Attached scsi generic sg10 type 0
[ 10.344922] sd 6:0:0:0: Attached scsi generic sg11 type 0
[ 10.344956] sd 7:0:0:0: Attached scsi generic sg12 type 0
[ 10.345107] sd 5:0:0:0: [sdk] Attached SCSI disk
[ 10.345858] sd 14:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.347452] sd 1:0:0:0: [sdg] Attached SCSI disk
[ 10.409910] sd 14:0:4:0: [sdf] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 10.410362] sd 6:0:0:0: [sdl] Attached SCSI disk
[ 10.412148] sd 2:0:0:0: [sdh] Attached SCSI disk
[ 10.413578] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.413853] sd 4:0:0:0: [sdj] Attached SCSI disk
[ 10.414353] sd 14:0:3:0: [sde] Write Protect is off
[ 10.441178] sd 14:0:1:0: [sdc] Write Protect is off
[ 10.441297] sd 14:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 10.441305] sd 7:0:0:0: [sdm] Attached SCSI disk
[ 10.441609] sd 14:0:2:0: [sdd] Write Protect is off
[ 10.464495] sd 14:0:4:0: [sdf] Write Protect is off
[ 10.469474] sd 14:0:2:0: [sdd] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.470044] sd 14:0:1:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.489118] sd 14:0:4:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.498037] sdb: sdb1 sdb2
[ 10.498172] sde: sde1 sde2
[ 10.503789] sdc: sdc1 sdc2
[ 10.503845] sdd: sdd1 sdd2
[ 10.512544] sd 14:0:3:0: [sde] Attached SCSI disk
[ 10.518050] sd 14:0:1:0: [sdc] Attached SCSI disk
[ 10.518133] sd 14:0:0:0: [sdb] Attached SCSI disk
[ 10.527763] sdf: sdf1 sdf2
[ 10.527807] sd 14:0:2:0: [sdd] Attached SCSI disk
[ 10.542794] sd 14:0:4:0: [sdf] Attached SCSI disk
[ 12.070949] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 12.086904] usbcore: registered new interface driver usbhid
[ 12.092532] usbhid: USB HID core driver
Begin: Loading essential drivers[ 12.466213] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 12.475657] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.487789] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 12.496085] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.504436] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.516594] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 12.524879] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.533252] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.545429] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 12.553687] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 12.562130] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 12.586039] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 12.594509] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 13.130413] md: md0 stopped.
[ 13.148845] md: bind<sdc1>
[ 13.151927] md: bind<sdb1>
[ 13.155968] md: raid1 personality registered for level 1
[ 13.161622] bio: create slab <bio-1> at 1
[ 13.165789] md/raid1:md0: active with 2 out of 2 mirrors
[ 13.171168] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 13.178271] md0:
has been started with 2 drives.
[ 13.353756] md: md1 stopped.
[ 13.377679] md: bind<sdf1>
[ 13.389187] md: bind<sdd1>
[ 13.393063] md/raid1:md1: active with 2 out of 2 mirrors
[ 13.398453] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 13.423389] md1: unknown partition table
[ 13.573217] md: md10 stopped.
[ 13.576960] md: bind<sdh1>
[ 13.579868] md: bind<sdg1>
[ 13.583701] md/raid1:md10: active with 2 out of 2 mirrors
[ 13.589195] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 13.597437] md10: unknown partition table
d with 2 drives.
[ 13.642321] md: md9 stopped.
[ 13.645911] md: bind<sdi1>
[ 13.648853] md: bind<sda1>
[ 13.652822] md/raid1:md9: active with 2 out of 2 mirrors
[ 13.658209] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 13.685409] md9: unknown partition table
[ 13.731513] md: md3 stopped.
[ 13.735330] md: bind<sdl1>
[ 13.738225] md: bind<sdj1>
[ 13.742557] md/raid1:md3: active with 2 out of 2 mirrors
[ 13.747944] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started with 2 drives.
[ 13.758752] md3: unknown partition table
[ 13.823130] md: md4 stopped.
[ 13.826720] md: bind<sdm1>
[ 13.829636] md: bind<sdk1>
[ 13.833537] md/raid1:md4: active with 2 out of 2 mirrors
[ 13.838941] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 13.846621] md4: unknown partition table
with 2 drives.
[ 14.405103] md: md6 stopped.
[ 14.409563] md: bind<sde2>
[ 14.412641] md: bind<sdb2>
[ 14.416541] md/raid1:md6: active with 2 out of 2 mirrors
[ 14.421934] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 14.429573] md6: unknown partition table
with 2 drives.
[ 14.636568] md: md7 stopped.
[ 14.668221] md: bind<sdf2>
[ 14.681551] md: bind<sdc2>
[ 14.685428] md/raid1:md7: active with 2 out of 2 mirrors
[ 14.690821] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 14.721289] md7: unknown partition table
[ 14.954541] md: md8 stopped.
[ 14.967221] md: bind<md7>
[ 14.970138] md: bind<md6>
[ 14.973950] md: raid0 personality registered for level 0
[ 14.979558] md/raid0:md8: md_size is 566178176 sectors.
[ 14.984836] md: RAID0 configuration for md8 - 2 zones
[ 14.989936] md: zone0=[md6/md7]
[ 14.993295] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 15.001558] md: zone1=[md7]
[ 15.004510] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 15.012749]
[ 15.014294] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 15.021914] md8: unknown partition table
with 2 drives.[ 15.027321] device-mapper: uevent: version 1.0.3
Success: assemb[ 15.033376] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 15.175846] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 15.194217] EXT3-fs (md0): recovery required on readonly filesystem
[ 15.200579] EXT3-fs (md0): write access will be enabled during recovery
[ 17.320620] kjournald starting. Commit interval 5 seconds
[ 17.320640] EXT3-fs (md0): recovery complete
[ 17.340053] EXT3-fs (md0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 18.745158] udevd[564]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 18.916816] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 18.925338] ACPI: Power Button [PWRB]
[ 18.929162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 18.936781] ACPI: Power Button [PWRF]
[ 18.940886] ACPI: Requesting acpi_cpufreq
[ 18.960955] udevd[597]: renamed network interface eth0 to rename2
[ 18.988501] udevd[601]: renamed network interface eth1 to eth3
[ 19.000634] udevd[615]: renamed network interface eth2 to eth0
[ 19.032635] udevd[597]: renamed network interface rename2 to eth2
[ 19.074287] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 19.084249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.158076] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 19.174947] iTCO_vendor_support: vendor-support=0
[ 19.250795] usbcore: registered new interface driver usbserial
[ 19.256814] USB Serial support registered for generic
[ 19.262027] usbcore: registered new interface driver usbserial_generic
[ 19.268661] usbserial: USB Serial Driver core
[ 19.288752] USB Serial support registered for pl2303
[ 19.293807] pl2303 3-2:1.0: pl2303 converter detected
[ 19.310692] usb 3-2: pl2303 converter now attached to ttyUSB0
[ 19.316547] usbcore: registered new interface driver pl2303
[ 19.322186] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 19.359535] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 19.365277] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 19.372291] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.402719] Error: Driver 'pcspkr' is already registered, aborting...
[ 19.593480] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 19.604402] usbcore: registered new interface driver asix
done.
Setting hostname to 'jack'...done.
Setting parameters of disc: /dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm failed!
Activating swap:swapon on /dev/md1
swapon: /dev[ 20.699350] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17945/122640 files, 111204/489952 blocks
.
[ 20.847181] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: recovering journal
/dev/mapper/vg_foo-lv_home: clean, 979798/8519680 files, 26202287/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: recovering journal
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: recovering journal
/dev/mapper/vg_mirror-lv_mirror: clean, 1976477/244195328 files, 515599750/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: recovering journal
/dev/mapper/vg_share-lv_share: clean, 18876/91578368 files, 317393916/366284800 blocks
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp was not cleanly unmounted, check forced.
/dev/mapper/vg_foo-lv_tmp: | | 0.9% /dev/mapper/vg_foo-lv_tmp: |= / 2.6% /dev/mapper/vg_foo-lv_tmp: |== - 5.2% /dev/mapper/vg_foo-lv_tmp: |=== \ 7.0% /dev/mapper/vg_foo-lv_tmp: |==== | 8.8% /dev/mapper/vg_foo-lv_tmp: |==== / 9.6% /dev/mapper/vg_foo-lv_tmp: |===== - 11.4% /dev/mapper/vg_foo-lv_tmp: |===== \ 13.1% /dev/mapper/vg_foo-lv_tmp: |====== | 14.9% /dev/mapper/vg_foo-lv_tmp: |======= / 16.6% /dev/mapper/vg_foo-lv_tmp: |======= - 18.4% /dev/mapper/vg_foo-lv_tmp: |======== \ 20.1% /dev/mapper/vg_foo-lv_tmp: |=========
| 21.9% /dev/mapper/vg_foo-lv_tmp: |========= / 23.6% /dev/mapper/vg_foo-lv_tmp: |========== - 25.4% /dev/mapper/vg_foo-lv_tmp: |=========== \ 27.1% /dev/mapper/vg_foo-lv_tmp: |============ | 28.9% /dev/mapper/vg_foo-lv_tmp: |============ / 30.6% /dev/mapper/vg_foo-lv_tmp: |============= - 32.4% /dev/mapper/vg_foo-lv_tmp: |============== \ 34.1% /dev/mapper/vg_foo-lv_tmp: |============== | 35.9% /dev/mapper/vg_foo-lv_tmp: |=============== / 37.6% /dev/mapper/vg_foo-lv_tmp: |================ - 39.4% /dev/mapper/vg_foo-lv_tmp: |================ \ 41.1% /dev/mapper/vg_foo-lv_tmp: |================= | 42.9% /dev/mapper/vg_foo-
lv_tmp: |================== / 44.6% /dev/mapper/vg_foo-lv_tmp: |=================== - 46.4% /dev/mapper/vg_foo-lv_tmp: |=================== \ 48.1% /dev/mapper/vg_foo-lv_tmp: |==================== | 49.9% /dev/mapper/vg_foo-lv_tmp: |===================== / 51.6% /dev/mapper/vg_foo-lv_tmp: |===================== - 53.4% /dev/mapper/vg_foo-lv_tmp: |====================== \ 55.1% /dev/mapper/vg_foo-lv_tmp: |======================= | 56.9% /dev/mapper/vg_foo-lv_tmp: |======================= / 58.6% /dev/mapper/vg_foo-lv_tmp: |======================== - 60.4% /dev/mapper/vg_foo-lv_tmp: |========================= \ 62.1% /dev/mapper/vg_foo-lv_tmp: |========================== | 63.9% /dev/mapper/vg_foo-lv_tmp: |==========================
/ 65.6% /dev/mapper/vg_foo-lv_tmp: |=========================== - 67.4% /dev/mapper/vg_foo-lv_tmp: |============================ \ 69.1% /dev/mapper/vg_foo-lv_tmp: |===================================== | 92.7% /dev/mapper/vg_foo-lv_tmp: |====================================== / 95.1% /dev/mapper/vg_foo-lv_tmp: |====================================== - 95.8% /dev/mapper/vg_foo-lv_tmp: |======================================= \ 97.5% /dev/mapper/vg_foo-lv_tmp: |========================================| 100.0% /dev/mapper/vg_foo-lv_tmp: 17/655360 files (5.9% non-contiguous), 46900/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: recovering journal
/dev/mapper/vg_foo-lv_var64: clean, 17781/655360 files, 1387466/2621440 blocks (check in 5 mounts)
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: recovering journal
/dev/mapper/vg_foo-lv_usr64: clean, 277592/458752 files, 1519326/1835008 blocks (check in 4 mounts)
fsck died with exit status 1
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 48.679686] kjournald starting. Commit interval 5 seconds
[ 48.695391] EXT3-fs (dm-4): using internal journal
[ 48.700240] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 48.738857] kjournald starting. Commit interval 5 seconds
[ 48.749781] EXT3-fs (dm-3): using internal journal
[ 48.754636] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 48.843693] kjournald starting. Commit interval 5 seconds
[ 48.871679] EXT3-fs (dm-1): using internal journal
[ 48.876533] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 48.912137] kjournald starting. Commit interval 5 seconds
[ 48.923392] EXT3-fs (dm-2): using internal journal
[ 48.928242] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 49.187207] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 49.266684] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
[ 49.813089] fuse init (API version 7.17)
failed!
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Initializing random number generator...[ ok done.
[....] Configuring network interfaces...[ 51.236152] tg3 0000:06:02.0: firmware: agent loaded tigon/tg3_tso.bin into memory
[ 51.296588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.583684] tg3 0000:06:02.0: eth0: Link is up at 1000 Mbps, full duplex
[ 54.586955] tg3 0000:06:02.0: eth0: Flow control is off for TX and off for RX
[ 54.586955] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 82.679560] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 82.792088] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 82.798684] asix 1-5:1.0: eth1: link down
[ 84.585497] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 92.790105] r8169 0000:04:00.0: eth2: link down
[ 92.794701] r8169 0000:04:00.0: eth2: link down
[ 92.800664] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 94.477309] r8169 0000:04:00.0: eth2: link up
[ 94.481297] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 103.158073] PPP generic driver version 2.4.2
[ 103.552844] NET: Registered protocol family 24
[ 104.699921] u32 classifier
[ 104.702687] Performance counters on
[ 104.706589] input device check on
[ 104.710305] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 113.841536] RPC: Registered named UNIX socket transport module.
[ 113.847513] RPC: Registered udp transport module.
[ 113.864332] RPC: Registered tcp transport module.
[ 113.869093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 113.923471] FS-Cache: Loaded
[ 113.988606] FS-Cache: Netfs 'nfs' registered for caching
[ 114.029822] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
[....] Starting filesystem in userspace: fuse[ ok .
Recovering nvi editor sessions...none found.
Loading the saved-state of the serial devices...
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
[....] Setting sensors limits[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Starting gmediaserver: [....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] Starting NTP server: ntpd[ ok .
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[....] Starting internet superserver: inetd[ ok .
[....] Starting automount...[ ok .
[....] Starting domain name service...: bind9[ ok .
[....] Starting system message bus: dbus[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
[....] Starting authentication failure monitor: fail2ban[ ok .
[....] Starting User-mode networking switch: uml_switch[ ok .
Starting news server: done.
[....] Starting web server: apache2httpd (pid 2980) already running
[ ok .
[ 117.858325] ip_tables: (C) 2000-2006 Netfilter Core Team
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting network benchmark server[ ok .
[ 118.082216] tun: Universal TUN/TAP device driver, 1.6
[ 118.087367] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[....] Starting periodic command scheduler: cron[ ok .
[ 118.214720] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 118.235822] NFSD: starting 90-second grace period
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting virtual private network daemon: server[ ok .
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
saned disabled; edit /etc/default/saned
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Starting System status server: rwhod[ ok .
[ 121.963026] lp: driver loaded but no devices found
[....] Starting HPA's tftpd: in.tftpd[ ok .
[ 121.998279] ppdev: user-space parallel port driver
Configuring kernel parameters... done
[....] Starting MTA: exim4[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 129.910109] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[ ok .
Debian GNU/Linux 7.0 jack ttyS0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.302 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.60 BogoMIPS (lpj=9333208)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020043] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.032537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.045475] Mount-cache hash table entries: 256
[ 0.048138] Initializing cgroup subsys cpuacct
[ 0.052010] Initializing cgroup subsys memory
[ 0.056017] Initializing cgroup subsys devices
[ 0.060007] Initializing cgroup subsys freezer
[ 0.064006] Initializing cgroup subsys net_cls
[ 0.068006] Initializing cgroup subsys blkio
[ 0.072011] Initializing cgroup subsys perf_event
[ 0.076036] CPU: Physical Processor ID: 0
[ 0.080006] CPU: Processor Core ID: 0
[ 0.083705] mce: CPU supports 6 MCE banks
[ 0.084013] CPU0: Thermal monitoring enabled (TM2)
[ 0.088009] using mwait in idle threads.
[ 0.092451] ACPI: Core revision 20110623
[ 0.108310] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154064] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.160009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.162982] ... version: 2
[ 0.164010] ... bit width: 40
[ 0.168010] ... generic registers: 2
[ 0.172011] ... value mask: 000000ffffffffff
[ 0.176011] ... max period: 000000007fffffff
[ 0.180011] ... fixed-purpose events: 3
[ 0.184011] ... event mask: 0000000700000003
[ 0.188215] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.192145] Booting Node 0, Processors #1
[ 0.292050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.296150] #2
[ 0.392044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.396146] #3 Ok.
[ 0.492049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.496061] Brought up 4 CPUs
[ 0.500033] Total of 4 processors activated (18594.55 BogoMIPS).
[ 0.508225] devtmpfs: initialized
[ 0.516589] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.520196] print_constraints: dummy:
[ 0.524120] NET: Registered protocol family 16
[ 0.528130] ACPI: bus type pci registered
[ 0.532096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.536035] PCI: not using MMCONFIG
[ 0.540035] PCI: Using configuration type 1 for base access
[ 0.544790] bio: create slab <bio-0> at 0
[ 0.548120] ACPI: Added _OSI(Module Device)
[ 0.552036] ACPI: Added _OSI(Processor Device)
[ 0.556036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.560036] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.569524] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.575085] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.580503] ACPI: Dynamic OEM Table Load:
[ 0.586319] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.592560] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.596505] ACPI: Dynamic OEM Table Load:
[ 0.600273] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.604558] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.612505] ACPI: Dynamic OEM Table Load:
[ 0.618315] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.624564] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.632512] ACPI: Dynamic OEM Table Load:
[ 0.636274] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.641284] ACPI: Interpreter enabled
[ 0.644044] ACPI: (supports S0 S3 S4 S5)
[ 0.649305] ACPI: Using IOAPIC for interrupt routing
[ 0.652063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.658397] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.694718] ACPI: No dock devices found.
[ 0.696045] HEST: Table not found.
[ 0.700046] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.704129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.708224] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.712046] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.716046] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.720046] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.724046] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.728074] DMAR: Forcing write-buffer flush capability
[ 0.732046] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.737641] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.740054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.744086] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.748424] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.752058] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.756293] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.760056] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.764299] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.768056] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.772548] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.776514] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.780052] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.784049] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.800859] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.806615] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.808782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.816095] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.822702] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.827015] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.834565] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.836871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.843070] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.844056] vgaarb: loaded
[ 0.848053] vgaarb: bridge control possible 0000:06:00.0
[ 0.852098] PCI: Using ACPI for IRQ routing
[ 0.861517] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.864058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.869457] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.884107] Switching to clocksource hpet
[ 0.889935] pnp: PnP ACPI init
[ 0.893050] ACPI: bus type pnp registered
[ 0.897372] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.904043] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.913044] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.919023] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.925002] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.931319] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.937987] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.944658] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.951548] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.958570] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.965535] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.971507] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.977479] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 0.983452] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 0.989515] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.996451] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.003473] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.010491] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.017501] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.024518] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.032406] pnp: PnP ACPI: found 14 devices
[ 1.036643] ACPI: ACPI bus type pnp unregistered
[ 1.050098] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.058000] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.065895] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.073789] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.080717] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.088618] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.094848] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.100126] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.106276] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.113121] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.118394] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.124542] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.131381] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.139191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.144473] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.150620] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.157463] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.165277] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.170551] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.176698] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.183538] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.191347] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.196630] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.202777] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.209615] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.217429] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.224718] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.229995] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.236147] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.242991] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.250825] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.256757] NET: Registered protocol family 2
[ 1.261416] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.270161] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.280692] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.288549] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.295214] TCP reno registered
[ 1.298420] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.304622] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.311412] NET: Registered protocol family 1
[ 1.316128] Unpacking initramfs...
[ 1.589341] Freeing initrd memory: 14072k freed
[ 1.598164] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.604688] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.612538] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.618829] audit: initializing netlink socket (disabled)
[ 1.624299] type=2000 audit(1369354140.624:1): initialized
[ 1.642644] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.650499] VFS: Disk quotas dquot_6.5.2
[ 1.654520] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.661098] msgmni has been set to 16007
[ 1.665363] alg: No test for stdrng (krng)
[ 1.669572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.677038] io scheduler noop registered
[ 1.692821] io scheduler deadline registered
[ 1.697178] io scheduler cfq registered (default)
[ 1.702485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.708131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.714803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.721637] ERST: Table is not found!
[ 1.725354] GHES: HEST is not enabled!
[ 1.729228] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.755871] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.852481] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.858471] Linux agpgart interface v0.103
[ 1.862879] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.869720] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.880171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.885332] mousedev: PS/2 mouse device common for all mice
[ 1.891004] rtc_cmos 00:03: RTC can wake from S4
[ 1.895803] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.902000] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.908874] cpuidle: using governor ladder
[ 1.913028] cpuidle: using governor menu
[ 1.917075] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.917205] TCP cubic registered
[ 1.929085] NET: Registered protocol family 10
[ 1.934079] Mobile IPv6
[ 1.936577] NET: Registered protocol family 17
[ 1.941080] Registering the dns_resolver key type
[ 1.946043] registered taskstats version 1
[ 1.951098] rtc_cmos 00:03: setting system clock to 2013-05-24 00:09:02 UTC (1369354142)
[ 1.959295] Initializing network drop monitor service
[ 1.965809] Freeing unused kernel memory: 576k freed
[ 1.970956] Write protecting the kernel read-only data: 6144k
[ 1.979323] Freeing unused kernel memory: 660k freed
[ 1.987037] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.003688] udevd[58]: starting version 175
[ 2.019099] usbcore: registered new interface driver usbfs
[ 2.029103] usbcore: registered new interface driver hub
[ 2.034711] SCSI subsystem initialized
[ 2.040240] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.054172] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c74000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 45
[ 2.064611] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.074669] usbcore: registered new device driver usb
[ 2.074817] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.075806] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c76000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 46
[ 2.075809] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.099195] tg3.c:v3.121 (November 2, 2011)
[ 2.109672] scsi0 : pata_jmicron
[ 2.113331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.113355] scsi1 : pata_jmicron
[ 2.113816] ata1: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.113819] ata2: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.137753] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.137835] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.138443] scsi2 : sata_mv
[ 2.138520] scsi3 : sata_mv
[ 2.138600] scsi4 : sata_mv
[ 2.138667] scsi5 : sata_mv
[ 2.138712] ata3: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.138716] ata4: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.138719] ata5: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.138722] ata6: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.193176] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.201263] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.209982] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.212487] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 2.212490] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.212493] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.212496] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.251380] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.264026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.269966] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.276816] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.284109] usb usb1: Product: EHCI Host Controller
[ 2.289036] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.295098] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.299901] hub 1-0:1.0: USB hub found
[ 2.303712] hub 1-0:1.0: 6 ports detected
[ 2.307896] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.313189] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.320676] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.329160] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.348025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.353837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.360682] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.367972] usb usb2: Product: EHCI Host Controller
[ 2.372905] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.378962] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.383740] hub 2-0:1.0: USB hub found
[ 2.387546] hub 2-0:1.0: 6 ports detected
[ 2.391799] ahci: SSS flag set, parallel bus scan disabled
[ 2.397377] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.405627] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.452781] scsi6 : ahci
[ 2.455467] scsi7 : ahci
[ 2.458162] scsi8 : ahci
[ 2.460858] scsi9 : ahci
[ 2.461301] scsi10 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.461303] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.461303] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.461305]
[ 2.485812] scsi11 : ahci
[ 2.488606] scsi12 : ahci
[ 2.491481] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 47
[ 2.492249] scsi 10:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 2.492255] scsi10:A:0:0: Tagged Queuing enabled. Depth 8
[ 2.492263] scsi target10:0:0: Beginning Domain Validation
[ 2.518333] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 47
[ 2.525811] ata9: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 47
[ 2.533288] ata10: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 47
[ 2.540865] ata11: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 47
[ 2.548435] ata12: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 47
[ 2.556106] scsi target10:0:0: wide asynchronous
[ 2.560837] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.566138] ahci 0000:03:00.0: JMB361 has only one port
[ 2.566156] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.566190] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.566236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.566239] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.566240] usb usb3: Product: UHCI Host Controller
[ 2.566242] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.566244] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.566373] hub 3-0:1.0: USB hub found
[ 2.566377] hub 3-0:1.0: 2 ports detected
[ 2.566462] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.566469] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.566510] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.566542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.566544] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.566546] usb usb4: Product: UHCI Host Controller
[ 2.566548] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.566549] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.566648] hub 4-0:1.0: USB hub found
[ 2.566652] hub 4-0:1.0: 2 ports detected
[ 2.566724] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.566731] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.566771] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.566804] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.566806] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.566808] usb usb5: Product: UHCI Host Controller
[ 2.566810] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.566811] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.566909] hub 5-0:1.0: USB hub found
[ 2.566913] hub 5-0:1.0: 2 ports detected
[ 2.566986] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.566994] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.567023] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.567055] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.567057] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.567059] usb usb6: Product: UHCI Host Controller
[ 2.567060] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.567062] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.567155] hub 6-0:1.0: USB hub found
[ 2.567158] hub 6-0:1.0: 2 ports detected
[ 2.567232] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.567238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.567266] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.567301] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.567303] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.567305] usb usb7: Product: UHCI Host Controller
[ 2.567306] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.567308] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.567401] hub 7-0:1.0: USB hub found
[ 2.567405] hub 7-0:1.0: 2 ports detected
[ 2.567477] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.567484] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.567513] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.567546] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.567548] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.567550] usb usb8: Product: UHCI Host Controller
[ 2.567551] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.567553] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.567648] hub 8-0:1.0: USB hub found
[ 2.567652] hub 8-0:1.0: 2 ports detected
[ 2.612047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.620475] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.620477] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.628440] ata3.00: configured for UDMA/133
[ 2.628459] scsi: waiting for bus probes to complete ...
[ 2.671375] scsi13 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.671377] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.671378] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 2.671379]
[ 2.788026] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 2.876043] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.876645] ata7.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 2.876648] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.990956] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.996526] ata7.00: configured for UDMA/133
[ 2.996539] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.996544] Switching to clocksource tsc
[ 3.011344] scsi target10:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.023877] scsi target10:0:0: Ending Domain Validation
[ 3.025656] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.025659] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.025661] usb 1-5: Product: AX88772
[ 3.025662] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.025663] usb 1-5: SerialNumber: 000001
[ 3.055912] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 3.064138] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 3.070652] scsi14 : ahci
[ 3.073446] scsi15 : ahci
[ 3.076247] ata13: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 3.083824] ata14: DUMMY
[ 3.084329] scsi 10:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.084335] scsi10:A:1:0: Tagged Queuing enabled. Depth 8
[ 3.084341] scsi target10:0:1: Beginning Domain Validation
[ 3.107514] scsi target10:0:1: wide asynchronous
[ 3.114671] scsi target10:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.126962] scsi target10:0:1: Ending Domain Validation
[ 3.134880] scsi 10:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.143132] scsi10:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.148719] scsi target10:0:2: Beginning Domain Validation
[ 3.157465] scsi target10:0:2: wide asynchronous
[ 3.160018] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.171205] scsi target10:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.183524] scsi target10:0:2: Ending Domain Validation
[ 3.190884] scsi 10:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.199141] scsi10:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.204741] scsi target10:0:3: Beginning Domain Validation
[ 3.213193] scsi target10:0:3: wide asynchronous
[ 3.220108] scsi target10:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.231736] scsi target10:0:3: Ending Domain Validation
[ 3.246516] scsi 10:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.254767] scsi10:A:4:0: Tagged Queuing enabled. Depth 8
[ 3.260351] scsi target10:0:4: Beginning Domain Validation
[ 3.269472] scsi target10:0:4: wide asynchronous
[ 3.276820] scsi target10:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.289145] scsi target10:0:4: Ending Domain Validation
[ 3.318234] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.324991] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.332176] usb 3-2: Product: USB-Serial Controller
[ 3.337103] usb 3-2: Manufacturer: Prolific Technology Inc.
[ 3.428027] ata13: SATA link down (SStatus 0 SControl 300)
[ 3.456011] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 3.551125] (scsi10:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.558232] (scsi10:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0)
[ 3.562215] Unexpected non-DT Data Phase
[ 3.571465] (scsi10:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.700545] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.707300] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.714488] usb 4-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.720803] usb 4-1: Manufacturer: American Power Conversion
[ 3.726514] usb 4-1: SerialNumber: 4B0742P97300
[ 5.632283] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 5.642839] sd 2:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.650604] sd 2:0:0:0: [sdf] Write Protect is off
[ 5.655471] sd 10:0:0:0: [sda] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.655489] sd 10:0:1:0: [sdb] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.655522] sd 10:0:3:0: [sdd] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 5.655548] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.666306] sdf: sdf1
[ 5.689992] sd 10:0:4:0: [sde] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.690000] sd 10:0:2:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.690026] sd 10:0:1:0: [sdb] Write Protect is off
[ 5.690030] sd 10:0:3:0: [sdd] Write Protect is off
[ 5.690106] sd 2:0:0:0: [sdf] Attached SCSI disk
[ 5.704242] sd 10:0:0:0: Attached scsi generic sg0 type 0
[ 5.704315] sd 10:0:1:0: Attached scsi generic sg1 type 0
[ 5.704383] sd 10:0:2:0: Attached scsi generic sg2 type 0
[ 5.704457] sd 10:0:3:0: Attached scsi generic sg3 type 0
[ 5.704523] sd 10:0:4:0: Attached scsi generic sg4 type 0
[ 5.704591] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 5.764202] sd 10:0:2:0: [sdc] Write Protect is off
[ 5.764207] sd 10:0:0:0: [sda] Write Protect is off
[ 5.764738] sd 10:0:1:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.783371] sd 10:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5.783377] sd 10:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.783405] sd 10:0:4:0: [sde] Write Protect is off
[ 5.806859] sd 10:0:2:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.807251] sd 10:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 5.828114] sdb: sdb1 sdb2
[ 5.831474] sda: sda1 sda2
[ 5.834363] sdc: sdc1 sdc2
[ 5.834384] sde: sde1 sde2
[ 5.840086] sdd: sdd1 sdd2
[ 5.840093] sd 10:0:1:0: [sdb] Attached SCSI disk
[ 5.851224] sd 10:0:0:0: [sda] Attached SCSI disk
[ 5.851337] sd 10:0:4:0: [sde] Attached SCSI disk
[ 5.860787] sd 10:0:2:0: [sdc] Attached SCSI disk
[ 5.860815] sd 10:0:3:0: [sdd] Attached SCSI disk
[ 6.128029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.164048] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 6.171077] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.200046] ata4.00: configured for UDMA/133
[ 6.204405] scsi: waiting for bus probes to complete ...
[ 6.517097] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 6.525406] sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.525485] sd 3:0:0:0: Attached scsi generic sg6 type 0
[ 6.538416] sd 3:0:0:0: [sdg] Write Protect is off
[ 6.543295] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.579563] sdg: sdg1
[ 6.582202] sd 3:0:0:0: [sdg] Attached SCSI disk
[ 7.000027] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.060045] ata5.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 7.065760] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.136045] ata5.00: configured for UDMA/133
[ 7.140472] scsi 4:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 7.148795] sd 4:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 7.148825] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 7.161766] sd 4:0:0:0: [sdh] Write Protect is off
[ 7.166632] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.197893] sdh: sdh1
[ 7.200522] sd 4:0:0:0: [sdh] Attached SCSI disk
[ 7.624024] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.652308] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 7.658376] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.672306] ata6.00: configured for UDMA/133
[ 7.676707] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 7.685001] sd 5:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.685036] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 7.698180] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 7.698186] sd 5:0:0:0: [sdi] Write Protect is off
[ 7.698207] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.720312] sdi: sdi1
[ 7.720521] sd 6:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.720523] sd 6:0:0:0: [sdj] 4096-byte physical blocks
[ 7.720553] sd 6:0:0:0: Attached scsi generic sg9 type 0
[ 7.720569] sd 6:0:0:0: [sdj] Write Protect is off
[ 7.720590] sd 6:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.743146] sdj: sdj1
[ 7.757680] sd 6:0:0:0: [sdj] Attached SCSI disk
[ 7.757746] sd 5:0:0:0: [sdi] Attached SCSI disk
[ 8.040015] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.046802] ata8.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 8.053033] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.060757] ata8.00: configured for UDMA/133
[ 8.065163] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 8.073453] sd 7:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.081263] sd 7:0:0:0: [sdk] 4096-byte physical blocks
[ 8.086577] sd 7:0:0:0: Attached scsi generic sg10 type 0
[ 8.086594] sd 7:0:0:0: [sdk] Write Protect is off
[ 8.086618] sd 7:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.106018] sdk: sdk1
[ 8.108708] sd 7:0:0:0: [sdk] Attached SCSI disk
[ 8.428014] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.435472] ata9.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 8.442489] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.450958] ata9.00: configured for UDMA/133
[ 8.455368] scsi 8:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 8.463638] sd 8:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.463673] sd 8:0:0:0: Attached scsi generic sg11 type 0
[ 8.476967] sd 8:0:0:0: [sdl] Write Protect is off
[ 8.481837] sd 8:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.531055] sdl: sdl1
[ 8.533669] sd 8:0:0:0: [sdl] Attached SCSI disk
[ 8.796014] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.802900] ata10.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 8.809222] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.817068] ata10.00: configured for UDMA/133
[ 8.821564] scsi 9:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 8.829856] sd 9:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.829891] sd 9:0:0:0: Attached scsi generic sg12 type 0
[ 8.843125] sd 9:0:0:0: [sdm] 4096-byte physical blocks
[ 8.848460] sd 9:0:0:0: [sdm] Write Protect is off
[ 8.853322] sd 9:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.873474] sdm: sdm1
[ 8.876089] sd 9:0:0:0: [sdm] Attached SCSI disk
[ 9.148013] ata11: SATA link down (SStatus 0 SControl 300)
[ 9.472013] ata12: SATA link down (SStatus 0 SControl 300)
[ 10.999752] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 11.015731] usbcore: registered new interface driver usbhid
[ 11.021367] usbhid: USB HID core driver
Begin: Loading essential drivers[ 11.454238] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 11.463461] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.475629] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 11.483882] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.492205] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.504371] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 11.512629] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.520945] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.533060] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 11.541349] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.549734] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.573696] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 11.582115] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 12.133659] md: md0 stopped.
[ 12.157679] md: bind<sdb1>
[ 12.161180] md: bind<sda1>
[ 12.165669] md: raid1 personality registered for level 1
[ 12.171345] bio: create slab <bio-1> at 1
[ 12.175508] md/raid1:md0: active with 2 out of 2 mirrors
[ 12.180890] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 12.187988] md0:
has been started with 2 drives.
[ 12.438355] md: md1 stopped.
[ 12.476127] md: bind<sde1>
[ 12.484044] md: bind<sdc1>
[ 12.487908] md/raid1:md1: active with 2 out of 2 mirrors
[ 12.493318] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 12.518224] md1: unknown partition table
[ 12.593709] md: md10 stopped.
[ 12.597547] md: bind<sdh1>
[ 12.600462] md: bind<sdg1>
[ 12.604414] md/raid1:md10: active with 2 out of 2 mirrors
[ 12.609894] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 12.618449] md10: unknown partition table
d with 2 drives.
[ 12.665549] md: md9 stopped.
[ 12.669158] md: bind<sdi1>
[ 12.672066] md: bind<sdf1>
[ 12.675976] md/raid1:md9: active with 2 out of 2 mirrors
[ 12.681382] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 12.706961] md9: unknown partition table
[ 12.749216] md: md3 stopped.
[ 12.752853] md: bind<sdl1>
[ 12.755758] md: bind<sdj1>
[ 12.759626] md/raid1:md3: active with 2 out of 2 mirrors
[ 12.765045] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started[ 12.773116] md3: unknown partition table
with 2 drives.
[ 12.815175] md: md4 stopped.
[ 12.818911] md: bind<sdm1>
[ 12.821831] md: bind<sdk1>
[ 12.825767] md/raid1:md4: active with 2 out of 2 mirrors
[ 12.831172] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 12.838845] md4: unknown partition table
with 2 drives.
[ 13.317204] md: md6 stopped.
[ 13.321246] md: bind<sdd2>
[ 13.324281] md: bind<sda2>
[ 13.328144] md/raid1:md6: active with 2 out of 2 mirrors
[ 13.333535] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 13.341219] md6: unknown partition table
with 2 drives.
[ 13.729230] md: md7 stopped.
[ 13.760809] md: bind<sde2>
[ 13.774107] md: bind<sdb2>
[ 13.777911] md/raid1:md7: active with 2 out of 2 mirrors
[ 13.783310] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 13.813852] md7: unknown partition table
[ 14.093715] md: md8 stopped.
[ 14.107601] md: bind<md7>
[ 14.110512] md: bind<md6>
[ 14.114313] md: raid0 personality registered for level 0
[ 14.119941] md/raid0:md8: md_size is 566178176 sectors.
[ 14.125254] md: RAID0 configuration for md8 - 2 zones
[ 14.130358] md: zone0=[md6/md7]
[ 14.133707] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 14.141965] md: zone1=[md7]
[ 14.144914] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 14.153155]
[ 14.154700] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 14.162332] md8: unknown partition table
with 2 drives.[ 14.167724] device-mapper: uevent: version 1.0.3
Success: assemb[ 14.173765] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 14.327887] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 14.353582] kjournald starting. Commit interval 5 seconds
Begin: Running /[ 14.353594] EXT3-fs (md0): mounted filesystem with ordered data mode
scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 15.712879] udevd[560]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 15.878162] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 15.886681] ACPI: Power Button [PWRB]
[ 15.886768] ACPI: Requesting acpi_cpufreq
[ 15.894755] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 15.903438] ACPI: Power Button [PWRF]
[ 15.976504] udevd[600]: renamed network interface eth2 to rename4
[ 16.000514] udevd[587]: renamed network interface eth0 to rename2
[ 16.024515] udevd[588]: renamed network interface eth1 to eth3
[ 16.060499] udevd[600]: renamed network interface rename4 to eth0
[ 16.072494] udevd[587]: renamed network interface rename2 to eth2
[ 16.078910] iTCO_vendor_support: vendor-support=0
[ 16.110204] usbcore: registered new interface driver usbserial
[ 16.118828] USB Serial support registered for generic
[ 16.125885] usbcore: registered new interface driver usbserial_generic
[ 16.132538] usbserial: USB Serial Driver core
[ 16.145927] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 16.151764] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 16.158903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.207292] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 16.217220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.238674] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.245643] USB Serial support registered for pl2303
[ 16.250711] pl2303 3-2:1.0: pl2303 converter detected
[ 16.269349] usb 3-2: pl2303 converter now attached to ttyUSB0
[ 16.275280] usbcore: registered new interface driver pl2303
[ 16.280972] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 16.353084] Error: Driver 'pcspkr' is already registered, aborting...
[ 16.489468] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 16.500380] usbcore: registered new interface driver asix
done.
Setting hostname to 'jack'...done.
Setting parameters of disc: /dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm failed!
Activating swap:swapon on /dev/md1
swapon: /dev[ 17.654510] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17808/122640 files, 110765/489952 blocks
.
[ 17.850382] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: clean, 979813/8519680 files, 26202345/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: clean, 1976477/244195328 files, 515599750/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: clean, 18891/91578368 files, 320647507/366284800 blocks (check in 5 mounts)
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp: clean, 16/655360 files, 46900/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: clean, 17767/655360 files, 1387679/2621440 blocks (check in 4 mounts)
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: clean, 277582/458752 files, 1519310/1835008 blocks (check in 3 mounts)
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 24.536253] kjournald starting. Commit interval 5 seconds
[ 24.551768] EXT3-fs (dm-4): using internal journal
[ 24.556618] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 24.585510] kjournald starting. Commit interval 5 seconds
[ 24.600159] EXT3-fs (dm-3): using internal journal
[ 24.605004] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 24.662948] kjournald starting. Commit interval 5 seconds
[ 24.674099] EXT3-fs (dm-1): using internal journal
[ 24.678950] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 24.722160] kjournald starting. Commit interval 5 seconds
[ 24.731799] EXT3-fs (dm-2): using internal journal
[ 24.736646] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 24.922683] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 25.006851] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
failed!
[ 25.490950] fuse init (API version 7.17)
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Initializing random number generator...[ ok done.
[....] Configuring network interfaces...[ 26.931106] tg3 0000:06:02.0: firmware: agent aborted loading tigon/tg3_tso.bin (not found?)
[ 26.939660] tg3 0000:06:02.0: eth0: TSO capability disabled
[ 26.984697] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.209688] tg3 0000:06:02.0: eth0: Link is up at 1000 Mbps, full duplex
[ 30.212961] tg3 0000:06:02.0: eth0: Flow control is off for TX and off for RX
[ 30.224870] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.359545] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 58.448418] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 58.455034] asix 1-5:1.0: eth1: link down
[ 60.241850] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 68.470067] r8169 0000:04:00.0: eth2: link down
[ 68.475940] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 70.168696] r8169 0000:04:00.0: eth2: link up
[ 70.172682] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 78.788213] PPP generic driver version 2.4.2
[ 79.330562] NET: Registered protocol family 24
[ 81.271637] u32 classifier
[ 81.274404] Performance counters on
[ 81.278323] input device check on
[ 81.282067] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 89.509979] RPC: Registered named UNIX socket transport module.
[ 89.515966] RPC: Registered udp transport module.
[ 89.520724] RPC: Registered tcp transport module.
[ 89.525479] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 89.586669] FS-Cache: Loaded
[ 89.652336] FS-Cache: Netfs 'nfs' registered for caching
[ 89.692719] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
Loading the saved-state of the serial devices...
[....] Starting filesystem in userspace: fuse[ ok .
Recovering nvi editor sessions...none found.
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
[....] Setting sensors limits[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Starting gmediaserver: [....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[....] Starting NTP server: ntpd[ ok .
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[....] Starting automount...[ ok .
[....] Starting system message bus: dbus[ ok .
Starting news server: done.
[....] Starting domain name service...: bind9[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
[....] Starting User-mode networking switch: uml_switch[ ok .
[....] Starting authentication failure monitor: fail2ban[ ok .
[....] Starting web server: apache2httpd (pid 2716) already running
[ ok .
[....] Starting network benchmark server[ ok .
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting periodic command scheduler: cron[ ok .
[....] Starting internet superserver: inetd[ ok .
[ 93.709648] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 93.813472] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 93.866128] NFSD: starting 90-second grace period
[ 93.870940] tun: Universal TUN/TAP device driver, 1.6
[ 93.876259] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting virtual private network daemon: server[ ok .
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
Configuring kernel parameters... done
[....] Starting System status server: rwhod[ ok .
[ 97.321698] lp: driver loaded but no devices found
[ 97.350925] ppdev: user-space parallel port driver
saned disabled; edit /etc/default/saned
[....] Starting HPA's tftpd: in.tftpd[ ok .
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Starting MTA: exim4[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 105.447067] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[ ok .
Debian GNU/Linux 7.0 jack ttyS0
[ 2029.459733] general protection fault: 0000 [#1] SMP
[ 2029.463685] CPU 3
[ 2029.463685] Modules linked in: tcp_diag inet_diag xt_mac ipt_LOG ipt_REJECT xt_TCPMSS xt_tcpmss xt_state ipt_MASQUERADE xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack parport_pc ppdev lp parport xt_multiport tun iptable_filter ip_tables x_tables autofs4 nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc act_police sch_ingress cls_u32 sch_sfq sch_cbq pppoe pppox ppp_generic slhc fuse ext4 crc16 jbd2 ext2 snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_timer snd soundcore pl2303 pcspkr i2c_i801 asix evdev usbnet coretemp i2c_core iTCO_wdt usbserial acpi_cpufreq mperf iTCO_vendor_support processor button thermal_sys ext3 mbcache jbd dm_mod raid0 raid1 md_mod microcode usbhid ata_generic sg sd_mod crc_t10dif hid uhci_hcd ahci libahci sata_mv ehci_hcd aic7xxx pata_jmicron scsi_transport_spi tg3 libphy libata r8169 mii scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[ 2029.504011]
[ 2029.504011] Pid: 0, comm: swapper/3 Not tainted 3.2.0-4-amd64 #1 Debian 3.2.41-2+deb7u2 O.E.M. O.E.M./P43AL-V/P43AL
[ 2029.504011] RIP: 0010:[<ffffffff81285891>] [<ffffffff81285891>] skb_copy_ubufs+0xf8/0x1a3
[ 2029.504011] RSP: 0018:ffff88021fd83c60 EFLAGS: 00010286
[ 2029.504011] RAX: e552356f9c27d000 RBX: ffff8801d413ee80 RCX: 0000000006a28b5f
[ 2029.504011] RDX: ffff8801a7ca0000 RSI: e552356fa2ca5b5f RDI: ffff8801a7ca0000
[ 2029.504011] RBP: 0000000000000000 R08: ffff8801f3a08eb8 R09: 0000000000003677
[ 2029.504011] R10: 0000000000000002 R11: 0000000000002e73 R12: 0000000000000001
[ 2029.504011] R13: ffffea0005cb4300 R14: 06a28b5f06a28b5f R15: 0000160000000000
[ 2029.504011] FS: 0000000000000000(0000) GS:ffff88021fd80000(0000) knlGS:0000000000000000
[ 2029.504011] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2029.504011] CR2: 00007f16e7145c34 CR3: 00000001a7d1e000 CR4: 00000000000406e0
[ 2029.504011] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2029.504011] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2029.504011] Process swapper/3 (pid: 0, threadinfo ffff880216d6e000, task ffff880216d66f60)
[ 2029.504011] Stack:
[ 2029.504011] ffff880176b451c8 ffff8801f3a08eb8 ffff8801f3a08800 0000068000008b5f
[ 2029.504011] 0000000000000020 ffff8801d413ee80 0000000000000020 ffff880212078000
[ 2029.504011] 0000000000000000 ffffffff816918b0 00000000000000c4 ffffffff81285d41
[ 2029.504011] Call Trace:
[ 2029.504011] <IRQ>
[ 2029.504011] [<ffffffff81285d41>] ? skb_clone+0x21/0x88
[ 2029.504011] [<ffffffff813272f8>] ? packet_rcv_spkt+0x46/0xe8
[ 2029.504011] [<ffffffff8128ccb3>] ? __netif_receive_skb+0x3c0/0x428
[ 2029.504011] [<ffffffff8128e66a>] ? netif_receive_skb+0x63/0x69
[ 2029.504011] [<ffffffff8128eb3c>] ? napi_gro_receive+0x1d/0x2b
[ 2029.504011] [<ffffffff8128e6e6>] ? napi_skb_finish+0x1c/0x31
[ 2029.504011] [<ffffffffa0139042>] ? tg3_poll_work+0x5ec/0x9d2 [tg3]
[ 2029.504011] [<ffffffffa0139657>] ? tg3_poll+0x181/0x24d [tg3]
[ 2029.504011] [<ffffffff8128ec5a>] ? net_rx_action+0xa1/0x1af
[ 2029.504011] [<ffffffff812438e9>] ? add_interrupt_randomness+0x38/0x155
[ 2029.504011] [<ffffffff8104c094>] ? __do_softirq+0xb9/0x177
[ 2029.504011] [<ffffffff81065f1d>] ? timekeeping_get_ns+0xd/0x2a
[ 2029.504011] [<ffffffff81354c2c>] ? call_softirq+0x1c/0x30
[ 2029.504011] [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[ 2029.504011] [<ffffffff8104c2fc>] ? irq_exit+0x3c/0x9a
[ 2029.504011] [<ffffffff81027a01>] ? native_apic_msr_read+0xf/0x27
[ 2029.504011] [<ffffffff8100f60d>] ? do_IRQ+0x82/0x98
[ 2029.504011] [<ffffffff8134dcee>] ? common_interrupt+0x6e/0x6e
[ 2029.504011] <EOI>
[ 2029.504011] [<ffffffff810146a3>] ? mwait_idle+0x7f/0xac
[ 2029.504011] [<ffffffff81014696>] ? mwait_idle+0x72/0xac
[ 2029.504011] [<ffffffff8100d24d>] ? cpu_idle+0xaf/0xf2
[ 2029.504011] [<ffffffff8133fce4>] ? start_secondary+0x1d5/0x1db
[ 2029.504011] Code: 6d db b6 6d 48 c1 fa 03 48 0f af d1 41 8b 70 08 48 b9 00 00 00 00 00 88 ff ff 48 c1 e2 0c 48 01 c6 48 01 ca 41 8b 48 0c 48 89 d7 <f3> a4 e8 0e e3 ff ff 49 89 6d 30 4c 89 ed 44 39 64 24 18 0f 8f
[ 2029.504011] RIP [<ffffffff81285891>] skb_copy_ubufs+0xf8/0x1a3
[ 2029.504011] RSP <ffff88021fd83c60>
[ 2029.852883] ---[ end trace 7a218f722a17b78a ]---
[ 2029.857558] Kernel panic - not syncing: Fatal exception in interrupt
[ 2029.863965] Pid: 0, comm: swapper/3 Tainted: G D 3.2.0-4-amd64 #1 Debian 3.2.41-2+deb7u2
[ 2029.872987] Call Trace:
[ 2029.875477] <IRQ> [<ffffffff81347188>] ? panic+0x95/0x1a2
[ 2029.881165] [<ffffffff8134e846>] ? oops_end+0xa9/0xb6
[ 2029.886358] [<ffffffff8134df85>] ? general_protection+0x25/0x30
[ 2029.892420] [<ffffffff81285891>] ? skb_copy_ubufs+0xf8/0x1a3
[ 2029.898217] [<ffffffff81285d41>] ? skb_clone+0x21/0x88
[ 2029.903499] [<ffffffff813272f8>] ? packet_rcv_spkt+0x46/0xe8
[ 2029.909304] [<ffffffff8128ccb3>] ? __netif_receive_skb+0x3c0/0x428
[ 2029.915621] [<ffffffff8128e66a>] ? netif_receive_skb+0x63/0x69
[ 2029.921593] [<ffffffff8128eb3c>] ? napi_gro_receive+0x1d/0x2b
[ 2029.927479] [<ffffffff8128e6e6>] ? napi_skb_finish+0x1c/0x31
[ 2029.933286] [<ffffffffa0139042>] ? tg3_poll_work+0x5ec/0x9d2 [tg3]
[ 2029.939611] [<ffffffffa0139657>] ? tg3_poll+0x181/0x24d [tg3]
[ 2029.945498] [<ffffffff8128ec5a>] ? net_rx_action+0xa1/0x1af
[ 2029.951208] [<ffffffff812438e9>] ? add_interrupt_randomness+0x38/0x155
[ 2029.957876] [<ffffffff8104c094>] ? __do_softirq+0xb9/0x177
[ 2029.963499] [<ffffffff81065f1d>] ? timekeeping_get_ns+0xd/0x2a
[ 2029.969470] [<ffffffff81354c2c>] ? call_softirq+0x1c/0x30
[ 2029.975012] [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[ 2029.980381] [<ffffffff8104c2fc>] ? irq_exit+0x3c/0x9a
[ 2029.985573] [<ffffffff81027a01>] ? native_apic_msr_read+0xf/0x27
[ 2029.991721] [<ffffffff8100f60d>] ? do_IRQ+0x82/0x98
[ 2029.996737] [<ffffffff8134dcee>] ? common_interrupt+0x6e/0x6e
[ 2030.002622] <EOI> [<ffffffff810146a3>] ? mwait_idle+0x7f/0xac
[ 2030.008651] [<ffffffff81014696>] ? mwait_idle+0x72/0xac
[ 2030.014036] [<ffffffff8100d24d>] ? cpu_idle+0xaf/0xf2
[ 2030.019230] [<ffffffff8133fce4>] ? start_secondary+0x1d5/0x1db
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.200 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.40 BogoMIPS (lpj=9332800)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020043] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.032493] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043091] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.045474] Mount-cache hash table entries: 256
[ 0.048137] Initializing cgroup subsys cpuacct
[ 0.052009] Initializing cgroup subsys memory
[ 0.056018] Initializing cgroup subsys devices
[ 0.060007] Initializing cgroup subsys freezer
[ 0.064006] Initializing cgroup subsys net_cls
[ 0.068006] Initializing cgroup subsys blkio
[ 0.072011] Initializing cgroup subsys perf_event
[ 0.076037] CPU: Physical Processor ID: 0
[ 0.080006] CPU: Processor Core ID: 0
[ 0.084007] mce: CPU supports 6 MCE banks
[ 0.088013] CPU0: Thermal monitoring enabled (TM2)
[ 0.092009] using mwait in idle threads.
[ 0.096453] ACPI: Core revision 20110623
[ 0.112150] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157896] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.168009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.170981] ... version: 2
[ 0.172011] ... bit width: 40
[ 0.176011] ... generic registers: 2
[ 0.180011] ... value mask: 000000ffffffffff
[ 0.184011] ... max period: 000000007fffffff
[ 0.188012] ... fixed-purpose events: 3
[ 0.192012] ... event mask: 0000000700000003
[ 0.196216] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.200145] Booting Node 0, Processors #1
[ 0.300048] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.304151] #2
[ 0.400044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.404147] #3 Ok.
[ 0.500049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.504061] Brought up 4 CPUs
[ 0.508034] Total of 4 processors activated (18664.64 BogoMIPS).
[ 0.516218] devtmpfs: initialized
[ 0.524536] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.528197] print_constraints: dummy:
[ 0.532121] NET: Registered protocol family 16
[ 0.536131] ACPI: bus type pci registered
[ 0.540097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.544035] PCI: not using MMCONFIG
[ 0.548035] PCI: Using configuration type 1 for base access
[ 0.552795] bio: create slab <bio-0> at 0
[ 0.556121] ACPI: Added _OSI(Module Device)
[ 0.560037] ACPI: Added _OSI(Processor Device)
[ 0.564036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.568037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.577498] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.586846] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.592499] ACPI: Dynamic OEM Table Load:
[ 0.598313] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.604565] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.608504] ACPI: Dynamic OEM Table Load:
[ 0.612275] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.616562] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.624501] ACPI: Dynamic OEM Table Load:
[ 0.630315] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.640235] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.644507] ACPI: Dynamic OEM Table Load:
[ 0.648274] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.653287] ACPI: Interpreter enabled
[ 0.656045] ACPI: (supports S0 S3 S4 S5)
[ 0.661305] ACPI: Using IOAPIC for interrupt routing
[ 0.664063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.670395] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.706366] ACPI: No dock devices found.
[ 0.708046] HEST: Table not found.
[ 0.712047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.716130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.720225] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.724047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.728047] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.732047] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.736047] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.740075] DMAR: Forcing write-buffer flush capability
[ 0.744047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.749636] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.752054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.756087] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.760423] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.764059] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.768293] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.772060] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.776295] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.780057] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.784547] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.788512] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.792052] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.796050] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.812412] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.818605] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.820783] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.826476] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.830694] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.838475] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.846113] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.848867] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.855080] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.856056] vgaarb: loaded
[ 0.860054] vgaarb: bridge control possible 0000:06:00.0
[ 0.864099] PCI: Using ACPI for IRQ routing
[ 0.877044] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.880059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.885457] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.904091] Switching to clocksource hpet
[ 0.909939] pnp: PnP ACPI init
[ 0.913053] ACPI: bus type pnp registered
[ 0.917374] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.924043] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.933046] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.939027] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.945004] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.951323] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.957987] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.964652] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.971543] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.978564] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.985529] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.991502] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.997470] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 1.003445] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.010220] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.017156] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.024176] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.031200] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.038220] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.045239] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.052391] pnp: PnP ACPI: found 14 devices
[ 1.056627] ACPI: ACPI bus type pnp unregistered
[ 1.070082] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.077986] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.085884] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.093787] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.100720] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.108622] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.114853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.120128] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.126277] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.133115] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.138390] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.144537] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.151376] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.159186] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.164470] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.170615] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.177456] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.185273] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.190555] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.196702] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.203541] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.211348] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.216624] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.222773] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.229618] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.237430] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.244722] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.249998] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.256145] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.263713] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.271543] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.277480] NET: Registered protocol family 2
[ 1.282143] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.290882] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.301389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.308529] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.315203] TCP reno registered
[ 1.318414] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.324617] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.331401] NET: Registered protocol family 1
[ 1.336121] Unpacking initramfs...
[ 1.609323] Freeing initrd memory: 14072k freed
[ 1.618156] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.624677] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.632521] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.638816] audit: initializing netlink socket (disabled)
[ 1.644294] type=2000 audit(1369356327.640:1): initialized
[ 1.662663] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.670510] VFS: Disk quotas dquot_6.5.2
[ 1.674532] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.681109] msgmni has been set to 16007
[ 1.685346] alg: No test for stdrng (krng)
[ 1.689567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.697030] io scheduler noop registered
[ 1.712785] io scheduler deadline registered
[ 1.717137] io scheduler cfq registered (default)
[ 1.722444] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.728097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.734761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.741596] ERST: Table is not found!
[ 1.745314] GHES: HEST is not enabled!
[ 1.749192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.775826] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.872474] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.878448] Linux agpgart interface v0.103
[ 1.882860] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.889710] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.900168] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.905334] mousedev: PS/2 mouse device common for all mice
[ 1.911009] rtc_cmos 00:03: RTC can wake from S4
[ 1.915803] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.921986] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.928856] cpuidle: using governor ladder
[ 1.933030] cpuidle: using governor menu
[ 1.937206] TCP cubic registered
[ 1.938981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.949262] NET: Registered protocol family 10
[ 1.954261] Mobile IPv6
[ 1.956762] NET: Registered protocol family 17
[ 1.961263] Registering the dns_resolver key type
[ 1.966231] registered taskstats version 1
[ 1.971279] rtc_cmos 00:03: setting system clock to 2013-05-24 00:45:29 UTC (1369356329)
[ 1.979479] Initializing network drop monitor service
[ 1.985992] Freeing unused kernel memory: 576k freed
[ 1.991152] Write protecting the kernel read-only data: 6144k
[ 1.999520] Freeing unused kernel memory: 660k freed
[ 2.007235] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.023873] udevd[58]: starting version 175
[ 2.042118] usbcore: registered new interface driver usbfs
[ 2.059983] SCSI subsystem initialized
[ 2.063838] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.066550] usbcore: registered new interface driver hub
[ 2.078696] usbcore: registered new device driver usb
[ 2.085082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.092332] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.093294] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c64000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 45
[ 2.093297] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.093318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.126092] tg3.c:v3.121 (November 2, 2011)
[ 2.126820] scsi0 : pata_jmicron
[ 2.127150] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c7c000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 46
[ 2.127153] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.152819] scsi1 : pata_jmicron
[ 2.152828] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.152889] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.156783] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.173898] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.174758] ata1: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.174761] ata2: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.194758] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.196024] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.196051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.196053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.196056] usb usb1: Product: EHCI Host Controller
[ 2.196057] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.196059] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.196175] hub 1-0:1.0: USB hub found
[ 2.196180] hub 1-0:1.0: 6 ports detected
[ 2.245471] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.246117] scsi2 : sata_mv
[ 2.248233] scsi3 : sata_mv
[ 2.248329] scsi4 : sata_mv
[ 2.248418] scsi5 : sata_mv
[ 2.248466] ata3: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.248469] ata4: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.248472] ata5: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.248475] ata6: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.250444] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 2.250447] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.250450] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.250453] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.329583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.337375] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.345875] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.364020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.369840] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.376686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.383971] usb usb2: Product: EHCI Host Controller
[ 2.388902] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.394960] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.399746] hub 2-0:1.0: USB hub found
[ 2.403551] hub 2-0:1.0: 6 ports detected
[ 2.407819] ahci: SSS flag set, parallel bus scan disabled
[ 2.413391] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.421641] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.460466] scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.460467] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.460468] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.460469]
[ 2.484329] scsi 6:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 2.484680] scsi7 : ahci
[ 2.484766] scsi8 : ahci
[ 2.484838] scsi9 : ahci
[ 2.484910] scsi10 : ahci
[ 2.484986] scsi11 : ahci
[ 2.485062] scsi12 : ahci
[ 2.485233] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 47
[ 2.485236] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 47
[ 2.485239] ata9: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 47
[ 2.485242] ata10: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 47
[ 2.485247] ata11: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 47
[ 2.485250] ata12: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 47
[ 2.553957] ahci 0000:03:00.0: JMB361 has only one port
[ 2.554303] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.554317] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.554347] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.554388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.554391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.554392] usb usb3: Product: UHCI Host Controller
[ 2.554394] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.554396] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.554436] scsi6:A:0:0: Tagged Queuing enabled. Depth 8
[ 2.554445] scsi target6:0:0: Beginning Domain Validation
[ 2.618449] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.618553] hub 3-0:1.0: USB hub found
[ 2.618559] hub 3-0:1.0: 2 ports detected
[ 2.618643] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.618650] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.618689] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.618722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.618724] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.618726] usb usb4: Product: UHCI Host Controller
[ 2.618728] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.618729] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.618824] hub 4-0:1.0: USB hub found
[ 2.618829] hub 4-0:1.0: 2 ports detected
[ 2.618904] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.618910] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.618950] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.618988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.618991] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.618993] usb usb5: Product: UHCI Host Controller
[ 2.618994] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.618996] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.619089] hub 5-0:1.0: USB hub found
[ 2.619093] hub 5-0:1.0: 2 ports detected
[ 2.619169] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.619178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.619208] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.619245] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.619247] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.619249] usb usb6: Product: UHCI Host Controller
[ 2.619250] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.619252] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.619734] hub 6-0:1.0: USB hub found
[ 2.619738] hub 6-0:1.0: 2 ports detected
[ 2.619822] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.619830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.619859] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.619896] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.619898] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.619900] usb usb7: Product: UHCI Host Controller
[ 2.619901] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.619903] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.620032] hub 7-0:1.0: USB hub found
[ 2.620037] hub 7-0:1.0: 2 ports detected
[ 2.620115] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.620122] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.620155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.620193] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.620195] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.620197] usb usb8: Product: UHCI Host Controller
[ 2.620199] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.620200] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.620312] hub 8-0:1.0: USB hub found
[ 2.620315] hub 8-0:1.0: 2 ports detected
[ 2.636023] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.636028] Switching to clocksource tsc
[ 2.934323] scsi13 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.934325] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.934326] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 2.934327]
[ 2.934441] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.948050] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.948054] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.956447] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.956449] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.964435] ata3.00: configured for UDMA/133
[ 2.964457] scsi: waiting for bus probes to complete ...
[ 2.988024] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 3.005032] scsi14 : ahci
[ 3.007829] scsi15 : ahci
[ 3.010642] ata13: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 3.018205] ata14: DUMMY
[ 3.020806] scsi target6:0:0: wide asynchronous
[ 3.027933] scsi target6:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.036023] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.044215] ata7.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 3.050458] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.051198] scsi target6:0:0: Ending Domain Validation
[ 3.063424] ata7.00: configured for UDMA/133
[ 3.069519] scsi 6:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.077688] scsi6:A:1:0: Tagged Queuing enabled. Depth 8
[ 3.083197] scsi target6:0:1: Beginning Domain Validation
[ 3.091891] scsi target6:0:1: wide asynchronous
[ 3.098955] scsi target6:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.111339] scsi target6:0:1: Ending Domain Validation
[ 3.119166] scsi 6:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.127337] scsi6:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.132848] scsi target6:0:2: Beginning Domain Validation
[ 3.141542] scsi target6:0:2: wide asynchronous
[ 3.144723] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.144725] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.144727] usb 1-5: Product: AX88772
[ 3.144728] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.144730] usb 1-5: SerialNumber: 000001
[ 3.175334] scsi target6:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.187656] scsi target6:0:2: Ending Domain Validation
[ 3.194936] scsi 6:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.203100] scsi6:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.208610] scsi target6:0:3: Beginning Domain Validation
[ 3.216978] scsi target6:0:3: wide asynchronous
[ 3.223813] scsi target6:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.235131] scsi target6:0:3: Ending Domain Validation
[ 3.251812] scsi 6:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.259977] scsi6:A:4:0: Tagged Queuing enabled. Depth 8
[ 3.265485] scsi target6:0:4: Beginning Domain Validation
[ 3.274503] scsi target6:0:4: wide asynchronous
[ 3.280010] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.287415] scsi target6:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.300059] scsi target6:0:4: Ending Domain Validation
[ 3.348025] ata13: SATA link down (SStatus 0 SControl 300)
[ 3.446387] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.453138] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.460321] usb 3-2: Product: USB-Serial Controller
[ 3.465247] usb 3-2: Manufacturer: Prolific Technology Inc.
[ 3.561970] (scsi6:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.568991] (scsi6:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0)
[ 3.572974] Unexpected non-DT Data Phase
[ 3.582116] (scsi6:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.592009] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 3.838725] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.845483] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.852676] usb 4-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.858996] usb 4-1: Manufacturer: American Power Conversion
[ 3.864725] usb 4-1: SerialNumber: 4B0742P97300
[ 5.642036] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 6.124024] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.160047] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 6.167062] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.196044] ata4.00: configured for UDMA/133
[ 6.200384] scsi: waiting for bus probes to complete ...
[ 6.850587] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 7.332022] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.400043] ata5.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 7.405753] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.476044] ata5.00: configured for UDMA/133
[ 7.480457] scsi 4:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 7.976026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.004306] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 8.010367] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.024307] ata6.00: configured for UDMA/133
[ 8.028718] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 8.037100] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 8.364014] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.370838] ata8.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 8.377073] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.384818] ata8.00: configured for UDMA/133
[ 8.389242] scsi 8:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 8.716014] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.723474] ata9.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 8.730493] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.738958] ata9.00: configured for UDMA/133
[ 8.743363] scsi 9:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 9.068014] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.074901] ata10.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 9.081222] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.089083] ata10.00: configured for UDMA/133
[ 9.093565] scsi 10:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 9.420012] ata11: SATA link down (SStatus 0 SControl 300)
[ 9.744012] ata12: SATA link down (SStatus 0 SControl 300)
[ 9.758674] sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 9.758678] sd 2:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 9.758728] sd 2:0:0:0: [sdf] Write Protect is off
[ 9.758752] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.758931] sd 4:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 9.758997] sd 4:0:0:0: [sdh] Write Protect is off
[ 9.759016] sd 5:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 9.759023] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.759060] sd 5:0:0:0: [sdi] Write Protect is off
[ 9.759081] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.759376] sd 7:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.759378] sd 7:0:0:0: [sdj] 4096-byte physical blocks
[ 9.759423] sd 7:0:0:0: [sdj] Write Protect is off
[ 9.759446] sd 7:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.759546] sd 8:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.759548] sd 8:0:0:0: [sdk] 4096-byte physical blocks
[ 9.759595] sd 8:0:0:0: [sdk] Write Protect is off
[ 9.759621] sd 8:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.759876] sd 9:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.759953] sd 9:0:0:0: [sdl] Write Protect is off
[ 9.759975] sd 9:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.762413] sd 10:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.762416] sd 10:0:0:0: [sdm] 4096-byte physical blocks
[ 9.762463] sd 10:0:0:0: [sdm] Write Protect is off
[ 9.762486] sd 10:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.779284] sdh: sdh1
[ 9.936602] sdl: sdl1
[ 9.936621] sdj: sdj1
[ 9.936713] sdf: sdf1
[ 9.936804] sdm: sdm1
[ 9.937010] sd 3:0:0:0: [sdg] Write Protect is off
[ 9.937329] sd 6:0:4:0: [sde] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 9.937349] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.937561] sd 6:0:1:0: [sdb] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 9.938735] sd 6:0:4:0: [sde] Write Protect is off
[ 9.939650] sd 6:0:0:0: [sda] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 9.939687] sdk: sdk1
[ 9.939724] sdi: sdi1
[ 9.939971] sd 4:0:0:0: [sdh] Attached SCSI disk
[ 9.997227] sd 6:0:1:0: [sdb] Write Protect is off
[ 9.997234] sd 6:0:0:0: [sda] Write Protect is off
[ 9.997254] sd 6:0:3:0: [sdd] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 9.997272] sd 6:0:2:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 9.997405] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 9.997476] sd 6:0:1:0: Attached scsi generic sg1 type 0
[ 9.997539] sd 6:0:2:0: Attached scsi generic sg2 type 0
[ 9.997616] sd 6:0:3:0: Attached scsi generic sg3 type 0
[ 9.997675] sd 6:0:4:0: Attached scsi generic sg4 type 0
[ 9.997736] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 9.997811] sd 3:0:0:0: Attached scsi generic sg6 type 0
[ 9.997873] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 9.997932] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 9.997996] sd 7:0:0:0: Attached scsi generic sg9 type 0
[ 9.998057] sd 8:0:0:0: Attached scsi generic sg10 type 0
[ 9.998117] sd 9:0:0:0: Attached scsi generic sg11 type 0
[ 9.998179] sd 10:0:0:0: Attached scsi generic sg12 type 0
[ 10.092142] sd 6:0:2:0: [sdc] Write Protect is off
[ 10.092229] sd 9:0:0:0: [sdl] Attached SCSI disk
[ 10.101653] sd 6:0:3:0: [sdd] Write Protect is off
[ 10.101814] sd 2:0:0:0: [sdf] Attached SCSI disk
[ 10.101830] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.102592] sd 6:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.102846] sd 10:0:0:0: [sdm] Attached SCSI disk
[ 10.103962] sd 5:0:0:0: [sdi] Attached SCSI disk
[ 10.104129] sd 7:0:0:0: [sdj] Attached SCSI disk
[ 10.124378] sdg: sdg1
[ 10.145680] sd 8:0:0:0: [sdk] Attached SCSI disk
[ 10.145831] sd 3:0:0:0: [sdg] Attached SCSI disk
[ 10.146174] sd 6:0:1:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.146433] sd 6:0:2:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 10.174196] sd 6:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 10.182859] sda: sda1 sda2
[ 10.185864] sde: sde1 sde2
[ 10.187254] sdc: sdc1 sdc2
[ 10.191600] sdb: sdb1 sdb2
[ 10.195247] sdd: sdd1 sdd2
[ 10.199498] sd 6:0:1:0: [sdb] Attached SCSI disk
[ 10.199580] sd 6:0:2:0: [sdc] Attached SCSI disk
[ 10.209319] sd 6:0:0:0: [sda] Attached SCSI disk
[ 10.215056] sd 6:0:4:0: [sde] Attached SCSI disk
[ 10.215532] sd 6:0:3:0: [sdd] Attached SCSI disk
[ 11.431964] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 11.447890] usbcore: registered new interface driver usbhid
[ 11.453516] usbhid: USB HID core driver
Begin: Loading essential drivers[ 11.774184] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 11.783661] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.795783] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 11.804069] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.812550] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.824630] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 11.832995] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.841393] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.853560] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 11.861818] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.870144] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.894167] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 11.902464] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 12.345013] md: md0 stopped.
[ 12.366945] md: bind<sdb1>
[ 12.369951] md: bind<sda1>
[ 12.373996] md: raid1 personality registered for level 1
[ 12.380168] bio: create slab <bio-1> at 1
[ 12.384345] md/raid1:md0: active with 2 out of 2 mirrors
[ 12.389747] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 12.396812] md0:
has been started with 2 drives.
[ 12.576723] md: md1 stopped.
[ 12.595605] md: bind<sde1>
[ 12.607089] md: bind<sdc1>
[ 12.610979] md/raid1:md1: active with 2 out of 2 mirrors
[ 12.616383] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 12.641292] md1: unknown partition table
[ 12.721304] md: md10 stopped.
[ 12.725929] md: bind<sdh1>
[ 12.728839] md: bind<sdg1>
[ 12.732738] md/raid1:md10: not clean -- starting background reconstruction
[ 12.739689] md/raid1:md10: active with 2 out of 2 mirrors
[ 12.745188] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 12.753374] md10: unknown partition table
d with 2 drives.
[ 12.804796] md: md9 stopped.
[ 12.808383] md: bind<sdi1>
[ 12.811310] md: bind<sdf1>
[ 12.815182] md/raid1:md9: active with 2 out of 2 mirrors
[ 12.820595] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 12.849938] md9: unknown partition table
[ 12.896440] md: md3 stopped.
[ 12.900440] md: bind<sdl1>
[ 12.903334] md: bind<sdj1>
[ 12.907212] md/raid1:md3: active with 2 out of 2 mirrors
[ 12.912634] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started[ 12.920919] md3: unknown partition table
with 2 drives.
[ 12.971425] md: md4 stopped.
[ 12.975074] md: bind<sdm1>
[ 12.977989] md: bind<sdk1>
[ 12.981911] md/raid1:md4: active with 2 out of 2 mirrors
[ 12.987330] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 12.994873] md4: unknown partition table
with 2 drives.
[ 13.219952] md: md6 stopped.
[ 13.224013] md: bind<sdd2>
[ 13.227113] md: bind<sda2>
[ 13.230989] md/raid1:md6: active with 2 out of 2 mirrors
[ 13.236381] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 13.244080] md6: unknown partition table
with 2 drives.
[ 13.584777] md: md7 stopped.
[ 13.595490] md: bind<sde2>
[ 13.606944] md: bind<sdb2>
[ 13.610804] md/raid1:md7: active with 2 out of 2 mirrors
[ 13.616206] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 13.640719] md7: unknown partition table
[ 13.869533] md: md8 stopped.
[ 13.880693] md: bind<md7>
[ 13.883587] md: bind<md6>
[ 13.887427] md: raid0 personality registered for level 0
[ 13.893066] md/raid0:md8: md_size is 566178176 sectors.
[ 13.898355] md: RAID0 configuration for md8 - 2 zones
[ 13.903457] md: zone0=[md6/md7]
[ 13.906819] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 13.915063] md: zone1=[md7]
[ 13.918005] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 13.926259]
[ 13.927806] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 13.935409] md8: unknown partition table
with 2 drives.[ 13.940854] device-mapper: uevent: version 1.0.3
Success: assemb[ 13.946877] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 14.195883] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 14.206663] EXT3-fs (md0): recovery required on readonly filesystem
[ 14.212987] EXT3-fs (md0): write access will be enabled during recovery
[ 14.737916] kjournald starting. Commit interval 5 seconds
[ 14.737942] EXT3-fs (md0): recovery complete
[ 14.751392] EXT3-fs (md0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 16.258198] udevd[563]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 16.417802] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 16.427169] ACPI: Requesting acpi_cpufreq
[ 16.427707] ACPI: Power Button [PWRB]
[ 16.437487] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.446588] ACPI: Power Button [PWRF]
[ 16.451658] iTCO_vendor_support: vendor-support=0
[ 16.464540] udevd[594]: renamed network interface eth0 to rename2
[ 16.475318] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 16.481388] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 16.488513] udevd[617]: renamed network interface eth2 to eth0
[ 16.488577] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.516489] udevd[598]: renamed network interface eth1 to eth3
[ 16.540501] udevd[594]: renamed network interface rename2 to eth2
[ 16.640970] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.684511] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 16.694454] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.805569] Error: Driver 'pcspkr' is already registered, aborting...
[ 16.961739] usbcore: registered new interface driver usbserial
[ 16.967699] USB Serial support registered for generic
[ 16.972873] usbcore: registered new interface driver usbserial_generic
[ 16.979466] usbserial: USB Serial Driver core
[ 17.094049] USB Serial support registered for pl2303
[ 17.099106] pl2303 3-2:1.0: pl2303 converter detected
[ 17.115496] usb 3-2: pl2303 converter now attached to ttyUSB0
[ 17.121339] usbcore: registered new interface driver pl2303
[ 17.126975] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 17.289464] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 17.300364] usbcore: registered new interface driver asix
done.
RAID status not OK. Exiting. ... failed!
Setting hostname to 'jack'...done.
Activating swap:swapon on /dev/md1
swapon: /dev[ 18.048722] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17808/122640 files, 110765/489952 blocks
.
[ 18.234717] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: recovering journal
/dev/mapper/vg_foo-lv_home: clean, 979816/8519680 files, 26202335/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: recovering journal
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: recovering journal
/dev/mapper/vg_mirror-lv_mirror: clean, 1976477/244195328 files, 515599750/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: recovering journal
[ 30.712088] md: resync of RAID array md10
[ 30.716326] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 30.722688] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 30.732781] md: using 128k window, over a total of 488382841k.
/dev/mapper/vg_share-lv_share: clean, 18887/91578368 files, 319442351/366284800 blocks (check in 4 mounts)
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp was not cleanly unmounted, check forced.
/dev/mapper/vg_foo-lv_tmp: Deleted inode 12 has zero dtime. FIXED.
/dev/mapper/vg_foo-lv_tmp: | | 0.9% /dev/mapper/vg_foo-lv_tmp: |= / 2.6% /dev/mapper/vg_foo-lv_tmp: |== - 4.4% /dev/mapper/vg_foo-lv_tmp: |== \ 6.1% /dev/mapper/vg_foo-lv_tmp: |=== | 7.9% /dev/mapper/vg_foo-lv_tmp: |==== / 9.6% /dev/mapper/vg_foo-lv_tmp: |===== - 11.4% /dev/mapper/vg_foo-lv_tmp: |===== \ 13.1% /dev/mapper/vg_foo-lv_tmp: |====== | 14.9% /dev/mapper/vg_foo-lv_tmp: |======= / 16.6% /dev/mapper/vg_foo-lv_tmp: |======= - 18.4% /dev/mapper/vg_foo-lv_tmp: |======== \ 20.1% /dev/mapper/vg_foo-lv_tmp: |=========
| 21.9% /dev/mapper/vg_foo-lv_tmp: |========= / 23.6% /dev/mapper/vg_foo-lv_tmp: |========== - 25.4% /dev/mapper/vg_foo-lv_tmp: |=========== \ 27.1% /dev/mapper/vg_foo-lv_tmp: |============ | 28.9% /dev/mapper/vg_foo-lv_tmp: |============ / 30.6% /dev/mapper/vg_foo-lv_tmp: |============= - 32.4% /dev/mapper/vg_foo-lv_tmp: |============== \ 34.1% /dev/mapper/vg_foo-lv_tmp: |============== | 35.9% /dev/mapper/vg_foo-lv_tmp: |=============== / 37.6% /dev/mapper/vg_foo-lv_tmp: |================ - 39.4% /dev/mapper/vg_foo-lv_tmp: |================ \ 41.1% /dev/mapper/vg_foo-lv_tmp: |================= | 42.9% /dev/mapper/vg_foo-
lv_tmp: |================== / 44.6% /dev/mapper/vg_foo-lv_tmp: |=================== - 46.4% /dev/mapper/vg_foo-lv_tmp: |=================== \ 48.1% /dev/mapper/vg_foo-lv_tmp: |==================== | 49.9% /dev/mapper/vg_foo-lv_tmp: |===================== / 52.5% /dev/mapper/vg_foo-lv_tmp: |====================== - 54.2% /dev/mapper/vg_foo-lv_tmp: |====================== \ 56.0% /dev/mapper/vg_foo-lv_tmp: |======================= | 57.8% /dev/mapper/vg_foo-lv_tmp: |======================== / 59.5% /dev/mapper/vg_foo-lv_tmp: |========================= - 61.2% /dev/mapper/vg_foo-lv_tmp: |========================= \ 63.0% /dev/mapper/vg_foo-lv_tmp: |========================== | 64.8% /dev/mapper/vg_foo-lv_tmp: |==========================
/ 65.6% /dev/mapper/vg_foo-lv_tmp: |=========================== - 67.4% /dev/mapper/vg_foo-lv_tmp: |============================ \ 70.0% /dev/mapper/vg_foo-lv_tmp: |====================================== | 95.1% /dev/mapper/vg_foo-lv_tmp: |====================================== / 95.2% /dev/mapper/vg_foo-lv_tmp: |======================================= - 97.2% /dev/mapper/vg_foo-lv_tmp: |========================================| 100.0% /dev/mapper/vg_foo-lv_tmp: 27/655360 files (3.7% non-contiguous), 46912/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: recovering journal
/dev/mapper/vg_foo-lv_var64: clean, 17791/655360 files, 1387966/2621440 blocks (check in 3 mounts)
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: recovering journal
/dev/mapper/vg_foo-lv_usr64: clean, 277582/458752 files, 1519310/1835008 blocks (check in 2 mounts)
fsck died with exit status 1
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 40.347282] kjournald starting. Commit interval 5 seconds
[ 40.358867] EXT3-fs (dm-4): using internal journal
[ 40.363761] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 40.400482] kjournald starting. Commit interval 5 seconds
[ 40.407266] EXT3-fs (dm-3): using internal journal
[ 40.412162] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 40.499353] kjournald starting. Commit interval 5 seconds
[ 40.511177] EXT3-fs (dm-1): using internal journal
[ 40.516077] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 40.549875] kjournald starting. Commit interval 5 seconds
[ 40.556892] EXT3-fs (dm-2): using internal journal
[ 40.561793] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 41.045239] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 41.130847] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
[ 41.642060] fuse init (API version 7.17)
failed!
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Initializing random number generator...[ ok done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Configuring network interfaces...[ 43.063616] tg3 0000:06:02.0: firmware: agent aborted loading tigon/tg3_tso.bin (not found?)
[ 43.072193] tg3 0000:06:02.0: eth0: TSO capability disabled
[ 43.129086] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.994974] tg3 0000:06:02.0: eth0: Link is up at 1000 Mbps, full duplex
[ 45.998247] tg3 0000:06:02.0: eth0: Flow control is off for TX and off for RX
[ 45.998247] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 74.499641] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 74.609856] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 74.616479] asix 1-5:1.0: eth1: link down
[ 76.275303] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 84.612872] r8169 0000:04:00.0: eth2: link down
[ 84.617471] r8169 0000:04:00.0: eth2: link down
[ 84.623463] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 86.258208] r8169 0000:04:00.0: eth2: link up
[ 86.262632] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 94.990712] PPP generic driver version 2.4.2
[ 95.519542] NET: Registered protocol family 24
[ 96.561662] u32 classifier
[ 96.564464] Performance counters on
[ 96.568369] input device check on
[ 96.572128] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 105.750969] RPC: Registered named UNIX socket transport module.
[ 105.756964] RPC: Registered udp transport module.
[ 105.761740] RPC: Registered tcp transport module.
[ 105.766517] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 105.821607] FS-Cache: Loaded
[ 105.886760] FS-Cache: Netfs 'nfs' registered for caching
[ 105.927903] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
Recovering nvi editor sessions...none found.
[....] Starting filesystem in userspace: fuse[ ok .
Loading the saved-state of the serial devices...
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
[....] Setting sensors limits[ ok .
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting rpcbind daemon...[....] Already running.[ ok .
Starting gmediaserver: [....] Starting NFS common utilities: statd idmapd[ ok .
Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[....] Starting automount...[ ok .
[....] Starting system message bus: dbus[ ok .
[....] Starting domain name service...: bind9[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
Starting news server: done.
[....] Starting authentication failure monitor: fail2ban[ ok .
[....] Starting User-mode networking switch: uml_switch[ ok .
[....] Starting web server: apache2httpd (pid 2880) already running
[ ok .
[ 109.806415] ip_tables: (C) 2000-2006 Netfilter Core Team
[....] Starting NTP server: ntpd/etc/init.d/ntp: line 40: 4608 Terminated lockfile-touch $LOCKFILE
[ ok .
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting network benchmark server[ ok .
[....] Starting internet superserver: inetd[ ok .
[....] Starting periodic command scheduler: cron[ ok .
[ 110.030162] tun: Universal TUN/TAP device driver, 1.6
[ 110.035386] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok 110.190850] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
h.
[ 110.206192] NFSD: starting 90-second grace period
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting virtual private network daemon: server[ ok .
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
saned disabled; edit /etc/default/saned
[....] Starting System status server: rwhod[ ok .
[ 112.949615] lp: driver loaded but no devices found
[ 112.974330] ppdev: user-space parallel port driver
Configuring kernel parameters... done
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Starting HPA's tftpd: in.tftpd[ ok .
[....] Starting MTA: exim4[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 123.910805] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[....] Starting upnp media server: mediatomb[ ok .
Debian GNU/Linux 7.0 jack ttyS0
Debian GNU/Linux 7.0 jack ttyS0
jack login: INIT: Switching[info] Using makefile-style concurrent boot in runlevel 6.
[....] Stopping upnp media server: mediatomb[ ok .
[....] mediatomb: Trying to delete the multicast route...[ ok done.
Stopping gmediaserver: gmediaserver.
[ 474.549984] nfsd: last server has exited, flushing export cache
[....] Stopping network benchmark server[ ok .
Stopping news server: done.
[....] Stopping file alteration monitor: FAM[ ok .
[....] Stopping ISC DHCP server: dhcpd[ ok .
[....] Stopping deferred execution scheduler: atd[ ok .
[....] Removing iSCSI enterprise target devices: :[ ok .
[....] Stopping MD monitoring service: mdadm --monitor[ ok .
[....] Stopping MTA: exim4_listener[ ok .
[....] Stopping filesystem in userspace: fuse[ ok .
[....] Stopping NFS kernel daemon: mountd nfsd[ ok .
[....] Unexporting directories for NFS kernel daemon...[ ok .
[....] Stopping automount...[ ok .
saned disabled; edit /etc/default/saned
[ 474.854385] colord-sane[5739] general protection ip:7f64431417cc sp:7f6443117b88 error:0[infoin libdbus-1.so.3.7.2[7f6443119000+44000]9m] nut-client d
isabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
[....] Stopping System status server: rwhod[ ok .
[....] Stopping NTP server: ntpd[ ok .
[....] Stopping RARP lookup daemon: rarpd[ ok .
[....] Stopping ftp server: proftpd[ ok .
[....] Stopping internet superserver: inetd[ ok .
[....] Stopping virtual private network daemon: server[ ok .
[....] Saving random seed...[ ok done.
[....] Stopping HPA's tftpd: in.tftpd[ ok .
[....] Stopping the Winbind daemon: winbind[ ok .
[....] Stopping User-mode networking switch: uml_switch[ ok .
[....] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Stopping authentication failure monitor: fail2ban[ ok .
[....] Stopping web server: apache2 ... waiting [ ok .
[....] Stopping ClamAV virus database updater: freshclam[ ok .
[....] Stopping domain name service...: bind9WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf)
waiting for pid 4246 to die
[ ok .
[....] Stopping Samba daemons: nmbd smbd[ ok .
[....] Asking all remaining processes to terminate...[ ok done.
[....] All processes ended within 2 seconds...[ ok done.
[....] Stopping enhanced syslogd: rsyslogd[ ok .
[....] Unmounting remote and non-toplevel virtual filesystems...[ ok done.
rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
[....] Stopping rpcbind daemon...[ ok .
[....] Stopping NFS common utilities: idmapd statd[ ok .
[info] Saving the system clock.
[info] Hardware Clock updated to Fri May 24 01:53:25 BST 2013.
[....] Deconfiguring network interfaces.../usr/bin/poff: No pppd is running. None stopped.
[ 520.369070] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[ ok done.
[....] Will now deactivate swap:swapoff on /dev/md1
[ ok .
[....] Will now unmount local filesystems:/dev/mapper/vg_mirror-lv_mirror has been unmounted
/dev/mapper/vg_foo-lv_home has been unmounted
/dev/mapper/vg_foo-lv_home has been unmounted
/dev/mapper/vg_mirror-lv_mirror has been unmounted
/dev/mapper/vg_share-lv_share has been unmounted
/dev/mapper/vg_mirror-lv_mirror has been unmounted
/dev/mapper/vg_share-lv_share has been unmounted
/dev/mapper/vg_mirror-lv_mirror has been unmounted
/dev/mapper/vg_foo-lv_foo has been unmounted
/dev/mapper/vg_foo-lv_home has been unmounted
/dev/mapper/vg_foo-lv_usr64 has been unmounted
/dev/mapper/vg_foo-lv_var64 has been unmounted
/dev/mapper/vg_foo-lv_tmp has been unmounted
.
[ 531.453810] md1: detected capacity change from 1735393280 to 0
[ 531.459722] md: md1 stopped.
[ 531.462659] md: unbind<sdc1>
[ 531.480013] md: export_rdev(sdc1)
[ 531.483387] md: unbind<sde1>
[ 531.520012] md: export_rdev(sde1)
Mounting root filesystem read-only...done.
Stopping MD array md1...done (stopped).
Waiting for MD a[ 531.600871] md: md10: resync done.
rrays to become idle...[ 531.642349] md: checkpointing resync of md10.
[ 531.788089] md: resync of RAID array md10
[ 531.792139] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 531.798014] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 531.807455] md: using 128k window, over a total of 488382841k.
[ 531.813326] md: resuming resync of md10 from checkpoint.
done.
Will now restart.
[ 533.832102] md: md10: resync done.
[ 533.864812] md: checkpointing resync of md10.
[ 534.996291] sd 10:0:0:0: [sdm] Synchronizing SCSI cache
[ 535.001749] sd 9:0:0:0: [sdl] Synchronizing SCSI cache
[ 535.007031] sd 8:0:0:0: [sdk] Synchronizing SCSI cache
[ 535.013657] sd 7:0:0:0: [sdj] Synchronizing SCSI cache
[ 535.019026] sd 5:0:0:0: [sdi] Synchronizing SCSI cache
[ 535.032043] sd 4:0:0:0: [sdh] Synchronizing SCSI cache
[ 535.037320] sd 3:0:0:0: [sdg] Synchronizing SCSI cache
[ 535.048041] sd 2:0:0:0: [sdf] Synchronizing SCSI cache
[ 535.060045] sd 6:0:3:0: [sdd] Synchronizing SCSI cache
[ 535.065522] sd 6:0:2:0: [sdc] Synchronizing SCSI cache
[ 535.071448] sd 6:0:1:0: [sdb] Synchronizing SCSI cache
[ 535.080606] Disabling non-boot CPUs ...
[ 535.396513] Restarting system.
[ 535.399597] machine restart
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable)
[ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] RAMDISK: 7f242000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000f94a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dff90000 00040 (v01 090409 RSDT1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dff90200 00084 (v01 090409 FACP1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dff905c0 05FF0 (v01 8CAF1 8CAF1P05 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dff9e000 00040
[ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 090409 APIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 090409 OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dff90440 00176 (v01 090409 SLIC1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dff9e040 00072 (v01 090409 OEMB1617 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dff985c0 00038 (v01 090409 OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000dff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000
[ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffe0000
[ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82944 r8192 d23552 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181812k/8912896k available (3420k kernel code, 525228k absent, 205856k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2332.975 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.95 BogoMIPS (lpj=9331900)
[ 0.016003] pid_max: default: 32768 minimum: 301
[ 0.020044] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.028633] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035206] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040564] Mount-cache hash table entries: 256
[ 0.044138] Initializing cgroup subsys cpuacct
[ 0.048009] Initializing cgroup subsys memory
[ 0.052017] Initializing cgroup subsys devices
[ 0.056007] Initializing cgroup subsys freezer
[ 0.060006] Initializing cgroup subsys net_cls
[ 0.064006] Initializing cgroup subsys blkio
[ 0.068011] Initializing cgroup subsys perf_event
[ 0.072036] CPU: Physical Processor ID: 0
[ 0.076006] CPU: Processor Core ID: 0
[ 0.080007] mce: CPU supports 6 MCE banks
[ 0.084013] CPU0: Thermal monitoring enabled (TM2)
[ 0.088009] using mwait in idle threads.
[ 0.092452] ACPI: Core revision 20110623
[ 0.104412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.149864] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a
[ 0.160009] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[ 0.160009] APIC delta adjusted to PM-Timer: 2083089 (2416357)
[ 0.160014] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.166980] ... version: 2
[ 0.168011] ... bit width: 40
[ 0.172010] ... generic registers: 2
[ 0.176011] ... value mask: 000000ffffffffff
[ 0.180011] ... max period: 000000007fffffff
[ 0.184011] ... fixed-purpose events: 3
[ 0.188012] ... event mask: 0000000700000003
[ 0.192217] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.196145] Booting Node 0, Processors #1
[ 0.296049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.300150] #2
[ 0.396044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.400146] #3 Ok.
[ 0.496048] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.500061] Brought up 4 CPUs
[ 0.504033] Total of 4 processors activated (18760.44 BogoMIPS).
[ 0.512225] devtmpfs: initialized
[ 0.520565] PM: Registering ACPI NVS region at dff9e000 (270336 bytes)
[ 0.524196] print_constraints: dummy:
[ 0.528120] NET: Registered protocol family 16
[ 0.532131] ACPI: bus type pci registered
[ 0.536096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.540035] PCI: not using MMCONFIG
[ 0.544035] PCI: Using configuration type 1 for base access
[ 0.552161] bio: create slab <bio-0> at 0
[ 0.556120] ACPI: Added _OSI(Module Device)
[ 0.560037] ACPI: Added _OSI(Processor Device)
[ 0.564036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.568037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.578298] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.587079] ACPI: SSDT 00000000dff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.592503] ACPI: Dynamic OEM Table Load:
[ 0.596273] ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.600561] ACPI: SSDT 00000000dff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.604505] ACPI: Dynamic OEM Table Load:
[ 0.608272] ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.616561] ACPI: SSDT 00000000dff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.624506] ACPI: Dynamic OEM Table Load:
[ 0.630314] ACPI: SSDT (null) 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.640261] ACPI: SSDT 00000000dff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.644505] ACPI: Dynamic OEM Table Load:
[ 0.648272] ACPI: SSDT (null) 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.653284] ACPI: Interpreter enabled
[ 0.656045] ACPI: (supports S0 S3 S4 S5)
[ 0.661305] ACPI: Using IOAPIC for interrupt routing
[ 0.664063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.670398] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.707601] ACPI: No dock devices found.
[ 0.708046] HEST: Table not found.
[ 0.712047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.716129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.720225] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.724047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.728047] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.732047] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.736047] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.740075] DMAR: Forcing write-buffer flush capability
[ 0.744047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.749643] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.752054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.756087] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.760423] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.764059] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.768318] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.772056] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.776294] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.780057] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.784548] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.788515] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.792052] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.796050] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.813596] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.820471] ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
[ 0.824783] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *11 12 14 15)
[ 0.832781] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 12 14 15)
[ 0.840096] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.847016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.851015] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[ 0.856465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.864155] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.868057] vgaarb: loaded
[ 0.870811] vgaarb: bridge control possible 0000:06:00.0
[ 0.872101] PCI: Using ACPI for IRQ routing
[ 0.882254] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.884059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.889452] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.904165] Switching to clocksource hpet
[ 0.909937] pnp: PnP ACPI init
[ 0.913055] ACPI: bus type pnp registered
[ 0.917375] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.924829] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.933833] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.939814] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.945791] system 00:07: [io 0x0480-0x04ff] could not be reserved
[ 0.952109] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.958774] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.965441] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.972330] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.979343] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.986307] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.992282] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.998264] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 1.004243] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.010307] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.017241] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.024270] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.031285] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.038303] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.045322] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.052475] pnp: PnP ACPI: found 14 devices
[ 1.056715] ACPI: ACPI bus type pnp unregistered
[ 1.070177] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.078081] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.085978] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.093878] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 1.100804] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.108702] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.114940] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.120215] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 1.126361] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe7fffff]
[ 1.133202] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.138485] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.144632] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf87fffff]
[ 1.151473] pci 0000:00:1c.0: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 1.159288] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.164563] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.170714] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.178321] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 1.186138] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.191413] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.197560] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.204397] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 1.212206] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.217485] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.223628] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.230466] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 1.238278] pci 0000:06:01.1: BAR 6: assigned [mem 0xfeb20000-0xfeb3ffff pref]
[ 1.245571] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 1.250848] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.256995] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.263834] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.271661] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.277606] NET: Registered protocol family 2
[ 1.282268] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.291009] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.301524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.308663] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.315330] TCP reno registered
[ 1.318538] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.324739] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.331521] NET: Registered protocol family 1
[ 1.336243] Unpacking initramfs...
[ 1.609460] Freeing initrd memory: 14072k freed
[ 1.618285] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.624808] Placing 64MB software IO TLB between ffff8800dbf8a000 - ffff8800dff8a000
[ 1.632652] software IO TLB at phys 0xdbf8a000 - 0xdff8a000
[ 1.638937] audit: initializing netlink socket (disabled)
[ 1.644407] type=2000 audit(1369356932.644:1): initialized
[ 1.662750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.670608] VFS: Disk quotas dquot_6.5.2
[ 1.674626] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.681204] msgmni has been set to 16007
[ 1.685443] alg: No test for stdrng (krng)
[ 1.701394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.708860] io scheduler noop registered
[ 1.712839] io scheduler deadline registered
[ 1.717199] io scheduler cfq registered (default)
[ 1.722508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.728152] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.734822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.741656] ERST: Table is not found!
[ 1.745373] GHES: HEST is not enabled!
[ 1.749254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.775890] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.904480] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.910472] Linux agpgart interface v0.103
[ 1.914890] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.921728] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.932184] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.937351] mousedev: PS/2 mouse device common for all mice
[ 1.943023] rtc_cmos 00:03: RTC can wake from S4
[ 1.947821] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.954016] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.960889] cpuidle: using governor ladder
[ 1.965041] cpuidle: using governor menu
[ 1.969095] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.969224] TCP cubic registered
[ 1.981117] NET: Registered protocol family 10
[ 1.986121] Mobile IPv6
[ 1.988621] NET: Registered protocol family 17
[ 1.993123] Registering the dns_resolver key type
[ 1.998090] registered taskstats version 1
[ 2.003139] rtc_cmos 00:03: setting system clock to 2013-05-24 00:55:34 UTC (1369356934)
[ 2.011337] Initializing network drop monitor service
[ 2.017850] Freeing unused kernel memory: 576k freed
[ 2.022999] Write protecting the kernel read-only data: 6144k
[ 2.031363] Freeing unused kernel memory: 660k freed
[ 2.039083] Freeing unused kernel memory: 676k freed
Loading, please wait...
[ 2.055738] udevd[58]: starting version 175
[ 2.071188] usbcore: registered new interface driver usbfs
[ 2.077919] usbcore: registered new interface driver hub
[ 2.091785] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.103611] tg3.c:v3.121 (November 2, 2011)
[ 2.109144] usbcore: registered new device driver usb
[ 2.114921] SCSI subsystem initialized
[ 2.118760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.125937] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c76000, 90:fb:a6:25:6b:6c, XID 98500000 IRQ 45
[ 2.132027] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.132054] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.132091] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.135988] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe4fe000
[ 2.152022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.152069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.152071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.152074] usb usb1: Product: EHCI Host Controller
[ 2.152075] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.152077] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.195006] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.195609] hub 1-0:1.0: USB hub found
[ 2.195614] hub 1-0:1.0: 6 ports detected
[ 2.211571] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.212258] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.222512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.223098] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c7c000, 80:1f:02:2f:9c:86, XID 18000000 IRQ 46
[ 2.223101] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.249470] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.254126] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.254896] tg3 0000:06:02.0: eth2: Tigon3 [partno(3C1000B-T) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0a:5e:00:38:4d
[ 2.254900] tg3 0000:06:02.0: eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.254903] tg3 0000:06:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.254905] tg3 0000:06:02.0: eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.258209] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4fc000
[ 2.272015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.272036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.272039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.272041] usb usb2: Product: EHCI Host Controller
[ 2.272042] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.272044] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.272147] hub 2-0:1.0: USB hub found
[ 2.272151] hub 2-0:1.0: 6 ports detected
[ 2.345693] ahci: SSS flag set, parallel bus scan disabled
[ 2.351607] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.351804] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx
[ 2.355816] scsi0 : sata_mv
[ 2.370558] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.370994] scsi1 : sata_mv
[ 2.371016] scsi2 : pata_jmicron
[ 2.371106] scsi4 : pata_jmicron
[ 2.371160] scsi3 : sata_mv
[ 2.371567] ata5: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
[ 2.371569] ata6: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
[ 2.371654] scsi5 : sata_mv
[ 2.371718] ata1: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe722000 irq 16
[ 2.371722] ata2: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe724000 irq 16
[ 2.371725] ata3: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe726000 irq 16
[ 2.371727] ata4: SATA max UDMA/133 mmio m1048576@0xfe700000 port 0xfe728000 irq 16
[ 2.476634] scsi6 : ahci
[ 2.479316] scsi7 : ahci
[ 2.481985] scsi8 : ahci
[ 2.484650] scsi9 : ahci
[ 2.487312] scsi10 : ahci
[ 2.490067] scsi11 : ahci
[ 2.492914] ata7: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa100 irq 47
[ 2.500379] ata8: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa180 irq 47
[ 2.507848] ata9: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa200 irq 47
[ 2.515315] ata10: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa280 irq 47
[ 2.522873] ata11: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa300 irq 47
[ 2.530425] ata12: SATA max UDMA/133 abar m2048@0xfe4fa000 port 0xfe4fa380 irq 47
[ 2.538033] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.538069] ahci 0000:03:00.0: JMB361 has only one port
[ 2.538084] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.554128] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.555362] scsi12 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.555363] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.555364] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.555365]
[ 2.556050] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.556054] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.556421] scsi13 : ahci
[ 2.556516] scsi14 : ahci
[ 2.556609] ata13: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 17
[ 2.556611] ata14: DUMMY
[ 2.613036] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[ 2.618890] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.625792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.633093] usb usb3: Product: UHCI Host Controller
[ 2.649854] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.652019] Refined TSC clocksource calibration: 2333.067 MHz.
[ 2.652023] Switching to clocksource tsc
[ 2.665787] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.765447] scsi15 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.765448] <Adaptec 3960D Ultra160 SCSI adapter>
[ 2.765449] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 2.765450]
[ 2.765484] hub 3-0:1.0: USB hub found
[ 2.765489] hub 3-0:1.0: 2 ports detected
[ 2.765586] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.765594] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.765639] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 2.765676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.765679] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.765681] usb usb4: Product: UHCI Host Controller
[ 2.765682] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.765684] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.765778] hub 4-0:1.0: USB hub found
[ 2.765782] hub 4-0:1.0: 2 ports detected
[ 2.765860] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.765868] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.765908] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 2.765945] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.765947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.765949] usb usb5: Product: UHCI Host Controller
[ 2.765950] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.765952] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.766053] hub 5-0:1.0: USB hub found
[ 2.766058] hub 5-0:1.0: 2 ports detected
[ 2.766135] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.766142] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.766174] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[ 2.766209] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.766211] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766213] usb usb6: Product: UHCI Host Controller
[ 2.766215] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.766217] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.766308] hub 6-0:1.0: USB hub found
[ 2.766312] hub 6-0:1.0: 2 ports detected
[ 2.766392] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.766399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.766426] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 2.766463] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.766465] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766467] usb usb7: Product: UHCI Host Controller
[ 2.766469] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.766470] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.766567] hub 7-0:1.0: USB hub found
[ 2.766570] hub 7-0:1.0: 2 ports detected
[ 2.766648] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.766655] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.766688] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[ 2.766724] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.766726] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766728] usb usb8: Product: UHCI Host Controller
[ 2.766730] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 2.766731] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.766825] hub 8-0:1.0: USB hub found
[ 2.766829] hub 8-0:1.0: 2 ports detected
[ 2.820019] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 2.872034] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.028015] usb 1-5: New USB device found, idVendor=0b95, idProduct=7720
[ 3.028017] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.028019] usb 1-5: Product: AX88772
[ 3.028021] usb 1-5: Manufacturer: ASIX Elec. Corp.
[ 3.028022] usb 1-5: SerialNumber: 000001
[ 3.028041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.036437] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 3.036440] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.044441] ata1.00: configured for UDMA/133
[ 3.044464] scsi: waiting for bus probes to complete ...
[ 3.143501] scsi 12:0:0:0: Direct-Access FUJITSU MAW3147NC 5803 PQ: 0 ANSI: 3
[ 3.151794] ata7.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 3.151806] scsi12:A:0:0: Tagged Queuing enabled. Depth 8
[ 3.151817] scsi target12:0:0: Beginning Domain Validation
[ 3.169126] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.176459] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.178995] ata7.00: configured for UDMA/133
[ 3.188433] scsi target12:0:0: wide asynchronous
[ 3.195658] scsi target12:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.208111] scsi target12:0:0: Ending Domain Validation
[ 3.216051] scsi 12:0:1:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.224300] scsi12:A:1:0: Tagged Queuing enabled. Depth 8
[ 3.229891] scsi target12:0:1: Beginning Domain Validation
[ 3.238651] scsi target12:0:1: wide asynchronous
[ 3.245804] scsi target12:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.252044] ata13: SATA link down (SStatus 0 SControl 300)
[ 3.263640] scsi target12:0:1: Ending Domain Validation
[ 3.271638] scsi 12:0:2:0: Direct-Access FUJITSU MAT3147NC 0105 PQ: 0 ANSI: 3
[ 3.279901] scsi12:A:2:0: Tagged Queuing enabled. Depth 8
[ 3.285485] scsi target12:0:2: Beginning Domain Validation
[ 3.294255] scsi target12:0:2: wide asynchronous
[ 3.301420] scsi target12:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 3.313837] scsi target12:0:2: Ending Domain Validation
[ 3.321205] scsi 12:0:3:0: Direct-Access SEAGATE ST3146807LC 0007 PQ: 0 ANSI: 3
[ 3.329466] scsi12:A:3:0: Tagged Queuing enabled. Depth 8
[ 3.335067] scsi target12:0:3: Beginning Domain Validation
[ 3.343525] scsi target12:0:3: wide asynchronous
[ 3.346895] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.346898] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.346900] usb 3-2: Product: USB-Serial Controller
[ 3.346901] usb 3-2: Manufacturer: Prolific Technology Inc.
[ 3.374923] scsi target12:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.386583] scsi target12:0:3: Ending Domain Validation
[ 3.405340] scsi 12:0:4:0: Direct-Access SEAGATE ST3146707LC D701 PQ: 0 ANSI: 3
[ 3.413595] scsi12:A:4:0: Tagged Queuing enabled. Depth 8
[ 3.419177] scsi target12:0:4: Beginning Domain Validation
[ 3.428311] scsi target12:0:4: wide asynchronous
[ 3.435667] scsi target12:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 3.447996] scsi target12:0:4: Ending Domain Validation
[ 3.484012] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 3.709984] (scsi12:A:6:0): refuses WIDE negotiation. Using 8bit transfers
[ 3.717099] (scsi12:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0)
[ 3.721082] Unexpected non-DT Data Phase
[ 3.730333] (scsi12:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
[ 3.730682] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.730684] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.730686] usb 4-1: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.730688] usb 4-1: Manufacturer: American Power Conversion
[ 3.730690] usb 4-1: SerialNumber: 4B0742P97300
[ 5.821746] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 5.832040] sd 0:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.839830] sd 0:0:0:0: [sdf] Write Protect is off
[ 5.843325] sd 12:0:1:0: [sdb] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.852340] sd 12:0:3:0: [sdd] 286749488 512-byte logical blocks: (146 GB/136 GiB)
[ 5.852350] sd 12:0:4:0: [sde] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.852373] sd 12:0:2:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 5.852378] sd 12:0:0:0: [sda] 286749480 512-byte logical blocks: (146 GB/136 GiB)
[ 5.852386] sd 12:0:1:0: [sdb] Write Protect is off
[ 5.852394] sd 0:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.864687] sdf: sdf1
[ 5.911108] sd 12:0:4:0: [sde] Write Protect is off
[ 5.911122] sd 12:0:2:0: [sdc] Write Protect is off
[ 5.911227] sd 0:0:0:0: [sdf] Attached SCSI disk
[ 5.911270] sd 12:0:0:0: [sda] Write Protect is off
[ 5.911380] sd 12:0:0:0: Attached scsi generic sg0 type 0
[ 5.911426] sd 12:0:1:0: Attached scsi generic sg1 type 0
[ 5.911471] sd 12:0:2:0: Attached scsi generic sg2 type 0
[ 5.911514] sd 12:0:3:0: Attached scsi generic sg3 type 0
[ 5.911557] sd 12:0:4:0: Attached scsi generic sg4 type 0
[ 5.911600] sd 0:0:0:0: Attached scsi generic sg5 type 0
[ 5.963182] sd 12:0:1:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.963201] sd 12:0:3:0: [sdd] Write Protect is off
[ 5.963745] sd 12:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.986725] sd 12:0:2:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 5.996071] sd 12:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5.996079] sd 12:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 6.016621] sdb: sdb1 sdb2
[ 6.019500] sda: sda1 sda2
[ 6.019508] sdc: sdc1 sdc2
[ 6.025234] sde: sde1 sde2
[ 6.028139] sdd: sdd1 sdd2
[ 6.034514] sd 12:0:2:0: [sdc] Attached SCSI disk
[ 6.034869] sd 12:0:1:0: [sdb] Attached SCSI disk
[ 6.044067] sd 12:0:3:0: [sdd] Attached SCSI disk
[ 6.044070] sd 12:0:0:0: [sda] Attached SCSI disk
[ 6.044107] sd 12:0:4:0: [sde] Attached SCSI disk
[ 6.308026] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.344048] ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 6.351078] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.380047] ata2.00: configured for UDMA/133
[ 6.384387] scsi: waiting for bus probes to complete ...
[ 6.989174] scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 6.997508] sd 1:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.997567] sd 1:0:0:0: Attached scsi generic sg6 type 0
[ 7.010498] sd 1:0:0:0: [sdg] Write Protect is off
[ 7.015366] sd 1:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.049723] sdg: sdg1
[ 7.052361] sd 1:0:0:0: [sdg] Attached SCSI disk
[ 7.476025] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.536044] ata3.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 7.541759] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.612044] ata3.00: configured for UDMA/133
[ 7.616458] scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 7.624747] sd 3:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 7.624782] sd 3:0:0:0: Attached scsi generic sg7 type 0
[ 7.637716] sd 3:0:0:0: [sdh] Write Protect is off
[ 7.642581] sd 3:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.674047] sdh: sdh1
[ 7.676689] sd 3:0:0:0: [sdh] Attached SCSI disk
[ 8.100022] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.128304] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 8.134362] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.148317] ata4.00: configured for UDMA/133
[ 8.152723] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 8.161006] sd 5:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.161038] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 8.161185] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 8.161360] sd 6:0:0:0: Attached scsi generic sg9 type 0
[ 8.161404] sd 6:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.161407] sd 6:0:0:0: [sdj] 4096-byte physical blocks
[ 8.161677] sd 6:0:0:0: [sdj] Write Protect is off
[ 8.161698] sd 6:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.214687] sdj: sdj1
[ 8.214703] sd 5:0:0:0: [sdi] Write Protect is off
[ 8.214725] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.227460] sdi: sdi1
[ 8.233617] sd 5:0:0:0: [sdi] Attached SCSI disk
[ 8.238456] sd 6:0:0:0: [sdj] Attached SCSI disk
[ 8.480016] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.486846] ata8.00: ATA-8: ST2000DM001-9YN164, CC47, max UDMA/133
[ 8.493086] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.500841] ata8.00: configured for UDMA/133
[ 8.505246] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC47 PQ: 0 ANSI: 5
[ 8.513596] sd 7:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.521406] sd 7:0:0:0: [sdk] 4096-byte physical blocks
[ 8.524045] sd 7:0:0:0: Attached scsi generic sg10 type 0
[ 8.532177] sd 7:0:0:0: [sdk] Write Protect is off
[ 8.537041] sd 7:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.557902] sdk: sdk1
[ 8.560507] sd 7:0:0:0: [sdk] Attached SCSI disk
[ 8.844016] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.851492] ata9.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 8.858510] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.866981] ata9.00: configured for UDMA/133
[ 8.871392] scsi 8:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 8.879663] sd 8:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.879711] sd 8:0:0:0: Attached scsi generic sg11 type 0
[ 8.892974] sd 8:0:0:0: [sdl] Write Protect is off
[ 8.897851] sd 8:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.943106] sdl: sdl1
[ 8.945712] sd 8:0:0:0: [sdl] Attached SCSI disk
[ 9.212019] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.218927] ata10.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 9.225266] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.233138] ata10.00: configured for UDMA/133
[ 9.237623] scsi 9:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 9.245906] sd 9:0:0:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.253721] sd 9:0:0:0: [sdm] 4096-byte physical blocks
[ 9.256057] sd 9:0:0:0: Attached scsi generic sg12 type 0
[ 9.264499] sd 9:0:0:0: [sdm] Write Protect is off
[ 9.269371] sd 9:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.294049] sdm: sdm1
[ 9.296679] sd 9:0:0:0: [sdm] Attached SCSI disk
[ 9.576019] ata11: SATA link down (SStatus 0 SControl 300)
[ 9.900015] ata12: SATA link down (SStatus 0 SControl 300)
[ 11.425826] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.1-1/input0
[ 11.441777] usbcore: registered new interface driver usbhid
[ 11.447407] usbhid: USB HID core driver
Begin: Loading essential drivers[ 11.734120] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
... [ 11.743530] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.755647] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 11.763903] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.772331] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.784429] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 11.792695] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.801113] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.825078] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
[ 11.833332] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 11.841692] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 11.853768] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
[ 11.862139] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 12.490355] md: md0 stopped.
[ 12.513596] md: bind<sdb1>
[ 12.516599] md: bind<sda1>
[ 12.520699] md: raid1 personality registered for level 1
[ 12.526319] bio: create slab <bio-1> at 1
[ 12.530498] md/raid1:md0: active with 2 out of 2 mirrors
[ 12.535923] md0: detected capacity change from 0 to 2006843392
mdadm: /dev/md0 [ 12.542962] md0:
has been started with 2 drives.
[ 12.771130] md: md1 stopped.
[ 12.802866] md: bind<sde1>
[ 12.807675] md: bind<sdc1>
[ 12.811580] md/raid1:md1: active with 2 out of 2 mirrors
[ 12.816982] md1: detected capacity change from 0 to 1735393280
mdadm: /dev/md1 has been started with 2 drives.
[ 12.841878] md1: unknown partition table
[ 12.908627] md: md10 stopped.
[ 12.912457] md: bind<sdh1>
[ 12.915370] md: bind<sdg1>
[ 12.919257] md/raid1:md10: not clean -- starting background reconstruction
[ 12.926222] md/raid1:md10: active with 2 out of 2 mirrors
[ 12.931708] md10: detected capacity change from 0 to 500104029184
mdadm: /dev/md10 has been starte[ 12.939747] md10: unknown partition table
d with 2 drives.
[ 13.004333] md: md9 stopped.
[ 13.007931] md: bind<sdi1>
[ 13.010848] md: bind<sdf1>
[ 13.015237] md/raid1:md9: active with 2 out of 2 mirrors
[ 13.020675] md9: detected capacity change from 0 to 1000201053184
mdadm: /dev/md9 has been started with 2 drives.
[ 13.046337] md9: unknown partition table
[ 13.087924] md: md3 stopped.
[ 13.091560] md: bind<sdl1>
[ 13.094473] md: bind<sdj1>
[ 13.098590] md/raid1:md3: active with 2 out of 2 mirrors
[ 13.104028] md3: detected capacity change from 0 to 2000397484032
mdadm: /dev/md3 has been started[ 13.111726] md3: unknown partition table
with 2 drives.
[ 13.153695] md: md4 stopped.
[ 13.157455] md: bind<sdm1>
[ 13.160402] md: bind<sdk1>
[ 13.164340] md/raid1:md4: active with 2 out of 2 mirrors
[ 13.169763] md4: detected capacity change from 0 to 2000397484032
mdadm: /dev/md4 has been started[ 13.177363] md4: unknown partition table
with 2 drives.
[ 13.398793] md: md6 stopped.
[ 13.402854] md: bind<sdd2>
[ 13.405975] md: bind<sda2>
[ 13.409897] md/raid1:md6: active with 2 out of 2 mirrors
[ 13.415296] md6: detected capacity change from 0 to 144805986304
mdadm: /dev/md6 has been started[ 13.423397] md6: unknown partition table
with 2 drives.
[ 13.864877] md: md7 stopped.
[ 13.882499] md: bind<sde2>
[ 13.908962] md: bind<sdb2>
[ 13.912836] md/raid1:md7: active with 2 out of 2 mirrors
[ 13.918238] md7: detected capacity change from 0 to 145077370880
mdadm: /dev/md7 has been started with 2 drives.
[ 13.948710] md7: unknown partition table
[ 14.187517] md: md8 stopped.
[ 14.200634] md: bind<md7>
[ 14.203545] md: bind<md6>
[ 14.207346] md: raid0 personality registered for level 0
[ 14.212922] md/raid0:md8: md_size is 566178176 sectors.
[ 14.218199] md: RAID0 configuration for md8 - 2 zones
[ 14.223307] md: zone0=[md6/md7]
[ 14.226665] zone-offset= 0KB, device-offset= 0KB, size= 282824064KB
[ 14.234912] md: zone1=[md7]
[ 14.237856] zone-offset= 282824064KB, device-offset= 141412032KB, size= 265024KB
[ 14.246105]
[ 14.247652] md8: detected capacity change from 0 to 289883226112
mdadm: /dev/md8 has been started[ 14.255505] md8: unknown partition table
with 2 drives.[ 14.260690] device-mapper: uevent: version 1.0.3
Success: assemb[ 14.267014] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
led all arrays.
done.
done.
Begin: Running /[ 14.455957] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 14.493853] kjournald starting. Commit interval 5 seconds
[ 14.493864] EXT3-fs (md0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 15.894555] udevd[556]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 16.060434] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 16.069085] ACPI: Power Button [PWRB]
[ 16.073181] ACPI: Requesting acpi_cpufreq
[ 16.080574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.088855] ACPI: Power Button [PWRF]
[ 16.092564] udevd[589]: renamed network interface eth1 to eth3
[ 16.173427] iTCO_vendor_support: vendor-support=0
[ 16.219289] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 16.225169] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 16.232240] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.238425] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 16.248368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.248415] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.468848] usbcore: registered new interface driver usbserial
[ 16.474802] USB Serial support registered for generic
[ 16.685274] Error: Driver 'pcspkr' is already registered, aborting...
[ 16.777403] asix 1-5:1.0: eth1: register 'asix' at usb-0000:00:1a.7-5, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:64:a6
[ 16.788314] usbcore: registered new interface driver asix
[ 16.788337] usbcore: registered new interface driver usbserial_generic
[ 16.788340] usbserial: USB Serial Driver core
[ 16.811937] USB Serial support registered for pl2303
[ 16.817033] pl2303 3-2:1.0: pl2303 converter detected
[ 16.833995] usb 3-2: pl2303 converter now attached to ttyUSB0
[ 16.839825] usbcore: registered new interface driver pl2303
[ 16.845456] pl2303: Prolific PL2303 USB to serial adaptor driver
done.
RAID status not OK. Exiting. ... failed!
Setting hostname to 'jack'...done.
Activating swap:swapon on /dev/md1
swapon: /dev[ 17.741448] Adding 1694716k swap on /dev/md1. Priority:1 extents:1 across:1694716k
/md1: insecure permissions 1660, 0660 suggested.
swapon: /dev/md1: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/md1: pagesize=4096, swapsize=1735393280, devsize=1735393280
.
Will now check root file system:fsck from util-linux 2.20.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 17808/122640 files, 110765/489952 blocks
.
[ 17.925031] EXT3-fs (md0): using internal journal
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups...done.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux 2.20.1
Checking all file systems.
/dev/dvd: nonexistent device ("nofail" fstab option may be used to skip this device)
/dev/scd0: nonexistent device ("nofail" fstab option may be used to skip this device)
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_home
/dev/mapper/vg_foo-lv_home: clean, 979819/8519680 files, 26202464/34078720 blocks
[/sbin/fsck.ext3 (1) -- /foo] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_foo
/dev/mapper/vg_foo-lv_foo: clean, 59300/1638400 files, 1352847/6553600 blocks
[/sbin/fsck.ext4 (1) -- /mirror] fsck.ext4 -a -C0 /dev/mapper/vg_mirror-lv_mirror
/dev/mapper/vg_mirror-lv_mirror: clean, 1976477/244195328 files, 515599750/976754688 blocks
[/sbin/fsck.ext4 (1) -- /share] fsck.ext4 -a -C0 /dev/mapper/vg_share-lv_share
/dev/mapper/vg_share-lv_share: clean, 18887/91578368 files, 319442351/366284800 blocks (check in 3 mounts)
[ 23.676109] md: resync of RAID array md10
[ 23.680175] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 23.686066] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 23.695531] md: using 128k window, over a total of 488382841k.
[ 23.701416] md: resuming resync of md10 from checkpoint.
[/sbin/fsck.ext2 (1) -- /tmp] fsck.ext2 -a -C0 /dev/mapper/vg_foo-lv_tmp
/dev/mapper/vg_foo-lv_tmp: clean, 16/655360 files, 46900/2621440 blocks
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_var64
/dev/mapper/vg_foo-lv_var64: clean, 17790/655360 files, 1388126/2621440 blocks (check in 2 mounts)
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mapper/vg_foo-lv_usr64
/dev/mapper/vg_foo-lv_usr64: clean, 277582/458752 files, 1519310/1835008 blocks (check after next mount)
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:[ 24.239509] kjournald starting. Commit interval 5 seconds
[ 24.249038] EXT3-fs (dm-4): using internal journal
[ 24.253890] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 24.282788] kjournald starting. Commit interval 5 seconds
[ 24.291440] EXT3-fs (dm-3): using internal journal
[ 24.296310] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 24.393639] kjournald starting. Commit interval 5 seconds
[ 24.400248] EXT3-fs (dm-1): using internal journal
[ 24.405119] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 24.438199] kjournald starting. Commit interval 5 seconds
[ 24.447059] EXT3-fs (dm-2): using internal journal
[ 24.451918] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 24.644937] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 24.726864] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse-music: mount /share/music/flac on /share/music/ogg,
Running /usr/local/bin/fuse-music --config_file=/share/music/.fuse/ogg.conf --basedir=/share/music/flac -o allow_other /share/music/ogg -d
mount: mount point /var/www/share/music/ogg does not exist
mount: mount point /foo/unstable-chroot/proc does not exist
mount: special device /home/build/out/ does not exist
mount: mount point /var/www/built does not exist
mount: mount point /foo/unstable-chroot/home does not exist
failed!
[ 25.201680] fuse init (API version 7.17)
Will now activate swapfile swap:done.
Checking minimum space in /tmp...done.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[ ok done.
/tmp[ ok .
Regulating system clock...done.
[....] Setting kernel variables ... /etc/sysctl.conf... /etc/sysctl.d/30-iscsitarget.conf...sysctl: setting key "net.ipv4.tcp_mem": Invalid argument
/etc/sysctl.d/mmap_min_addr.conf...[ ok done.
[....] Initializing random number generator...[ ok done.
[....] Configuring network interfaces...[ 26.684585] r8169 0000:04:00.0: eth0: link down
[ 26.690506] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.151759] r8169 0000:04:00.0: eth0: link up
[ 29.155746] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.075708] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 58.082437] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 58.089055] asix 1-5:1.0: eth1: link down
[ 59.870494] asix 1-5:1.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 68.231566] tg3 0000:06:02.0: firmware: agent aborted loading tigon/tg3_tso.bin (not found?)
[ 68.240166] tg3 0000:06:02.0: eth2: TSO capability disabled
[ 68.297151] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 69.884353] tg3 0000:06:02.0: eth2: Link is up at 100 Mbps, full duplex
[ 69.887622] tg3 0000:06:02.0: eth2: Flow control is on for TX and on for RX
[ 69.900136] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Plugin rp-pppoe.so loaded.
[ 78.612629] PPP generic driver version 2.4.2
[ 79.069339] NET: Registered protocol family 24
[ 80.267042] u32 classifier
[ 80.269841] Performance counters on
[ 80.285862] input device check on
[ 80.289599] Actions configured
[ ok done.
[....] Starting rpcbind daemon...[ ok .
[....] Starting NFS common utilities: statd[ 89.269860] RPC: Registered named UNIX socket transport module.
[ 89.275854] RPC: Registered udp transport module.
[ 89.280630] RPC: Registered tcp transport module.
[ 89.285428] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 89.334465] FS-Cache: Loaded
[ 89.399564] FS-Cache: Netfs 'nfs' registered for caching
[ 89.440764] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[info] Setting console screen modes and fonts.
setterm: cannot (un)set powersave mode: Invalid argument
[....] Starting filesystem in userspace: fuse[ ok .
Recovering nvi editor sessions...none found.
Loading the saved-state of the serial devices...
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
[....] Setting sensors limits[ ok .
Running 0dns-down to make sure resolv.conf is ok...done.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Starting gmediaserver: [....] Starting NFS common utilities: statd idmapd[ ok .
[....] Starting rpcbind daemon...[....] Already running.[ ok .
Starting file alteration monitor: FAM.
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting deferred execution scheduler: atd[ ok .
[....] iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ...[warn (warning).
[....] Starting system message bus: dbus[ ok .
[....] Starting automount...[ ok .
[....] Starting domain name service...: bind9[ ok .
[....] Starting ClamAV virus database updater: freshclam[ ok .
Starting news server: done.
[....] Starting authentication failure monitor: fail2ban[ ok .
[....] Starting User-mode networking switch: uml_switch[ ok .
[....] Starting web server: apache2httpd (pid 2675) already running
[ ok .
[ 93.059555] ip_tables: (C) 2000-2006 Netfilter Core Team
[....] Starting MD monitoring service: mdadm --monitor[ ok .
[....] Starting NTP server: ntpd[ ok .
[....] Starting network benchmark server[ ok .
[info] nut-server disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting internet superserver: inetd[ ok .
[ 93.283289] tun: Universal TUN/TAP device driver, 1.6
[ 93.288471] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[....] Starting periodic command scheduler: cron[ ok .
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[ 93.570558] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 93.582353] NFSD: starting 90-second grace period
[....] Exporting directories for NFS kernel daemon...[ ok .
[....] Starting NFS kernel daemon: nfsd mountd[ ok .
[....] Starting ISC DHCP server: dhcpd[ ok .
[....] Starting virtual private network daemon: server[ ok .
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
[info] nut-client disabled, please adjust the configuration to your needs.
[info] Then set MODE to a suitable value in /etc/nut/nut.conf to enable it.
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
saned disabled; edit /etc/default/saned
[....] Starting RARP lookup daemon: rarpd[ ok .
[....] Starting System status server: rwhod[ ok .
Configuring kernel parameters... done
[ 96.305235] lp: driver loaded but no devices found
[ 96.316747] ppdev: user-space parallel port driver
[....] Starting HPA's tftpd: in.tftpd[ ok .
[....] Starting MTA: exim4[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting Samba daemons: nmbd smbd[ ok .
[....] Starting the Winbind daemon: winbind[ ok .
[....] Starting ftp server: proftpd[ ok .
[....] Starting S.M.A.R.T. daemon: smartd[ ok .
[ 106.542928] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[....] Running local boot scripts (/etc/rc.local)/etc/rcS.d/S38firewall
[ ok .
[....] mediatomb: Trying to add the multicast route...[ ok done.
[....] Starting upnp media server: mediatomb[ ok .
Debian GNU/Linux 7.0 jack ttyS0
====================================
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
auto BOOT_IMAGE=linux ro root=900 ramdisk=0 console=tty0 console=ttyS0,115200n8
** Not tainted
** Model information
sys_vendor: O.E.M.
product_name: O.E.M.
product_version: 1.0
chassis_vendor: Foxconn
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: FOXCONN
board_name: P43AL-V/P43AL
board_version: 1.0
** Loaded modules:
tcp_diag
inet_diag
xt_mac
ipt_LOG
ipt_REJECT
xt_TCPMSS
xt_tcpmss
xt_state
ipt_MASQUERADE
xt_tcpudp
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
parport_pc
ppdev
lp
parport
tun
xt_multiport
iptable_filter
ip_tables
x_tables
autofs4
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
act_police
sch_ingress
cls_u32
sch_sfq
sch_cbq
pppoe
pppox
ppp_generic
slhc
fuse
ext4
crc16
jbd2
ext2
pl2303
snd_pcm_oss
snd_mixer_oss
snd_pcm
usbserial
asix
usbnet
snd_page_alloc
snd_timer
snd
soundcore
coretemp
pcspkr
i2c_i801
iTCO_wdt
i2c_core
evdev
iTCO_vendor_support
acpi_cpufreq
mperf
processor
button
thermal_sys
ext3
mbcache
jbd
dm_mod
raid0
raid1
md_mod
microcode
usbhid
ata_generic
sg
sd_mod
crc_t10dif
hid
pata_jmicron
sata_mv
uhci_hcd
aic7xxx
ahci
scsi_transport_spi
libahci
libata
ehci_hcd
tg3
libphy
r8169
mii
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe500000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 9c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 9880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 9800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe4fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8600000-f87fffff
Prefetchable memory behind bridge: 00000000f8800000-00000000f89fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f8400000-00000000f85fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f81fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 9480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 9400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe4fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=32]
Region 5: Memory at fe4fa000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe4f9c00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
01:00.0 RAID bus controller [0104]: Adaptec Serial ATA II RAID 1430SA [9005:0243] (rev 02)
Subsystem: Adaptec Serial ATA II RAID 1430SA [9005:0243]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at a800 [size=256]
Region 3: Memory at fe600000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: sata_mv
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Foxconn International, Inc. Device [105b:0de9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Foxconn International, Inc. Device [105b:0de9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:0dd9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe9ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
06:00.0 VGA compatible controller [0300]: S3 Inc. Savage 4 [5333:8a22] (rev 04) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:8888]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at feb70000 [disabled] [size=64K]
Capabilities: <access denied>
06:01.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
BIST result: 00
Region 0: I/O ports at e800 [disabled] [size=256]
Region 1: Memory at feb6f000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feb40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
06:01.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
BIST result: 00
Region 0: I/O ports at e400 [disabled] [size=256]
Region 1: Memory at feb6e000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at feb20000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
06:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet [14e4:16a6] (rev 02)
Subsystem: 3Com Corporation Device [10b7:1100]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feb10000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0b95:7720 ASIX Electronics Corp. AX88772
Bus 003 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 004 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii lilo 1:23.2-4
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
ii firmware-atheros 0.36+wheezy.1
ii firmware-bnx2 0.36+wheezy.1
ii firmware-bnx2x 0.36+wheezy.1
ii firmware-brcm80211 0.36+wheezy.1
ii firmware-intelwimax 0.36+wheezy.1
ii firmware-ipw2x00 0.36+wheezy.1
ii firmware-ivtv 0.36+wheezy.1
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
ii firmware-netxen 0.36+wheezy.1
ii firmware-qlogic 0.36+wheezy.1
ii firmware-ralink 0.36+wheezy.1
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---