--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: 3.8.3 breaks mode & connected output handling on intel GM45
- From: Anthony DeRobertis <anthony@derobert.net>
- Date: Sat, 23 Mar 2013 21:09:03 -0400
- Message-id: <20130324010903.5130.17545.reportbug@Heisenberg.home>
Package: src:linux
Version: 3.8.3-1~experimental.1
Severity: important
[Reporting this bug running 3.8.2, which works...]
On 3.8.3, the kernel (and X11) pick 1024x768, instead of 1366x768 (the
pannel's native resolution, and highest).
Also, on 3.8.3, it always believes VGA1 is connected (even when its
not). Further, it never believes HDMI1 is connected (eve when it is).
And when you connect HDMI1, xrandr shows the probed modes under VGA1.
Its not just labels being swapped; turning on VGA1 doesn't work.
Manually adding a mode to HDMI1, then turning it on does work—though
HDMI audio does not.
I'll attach the dmesg from 3.8.3 as well, though I don't see any real
differences (other than the console size, from getting the mode wrong, I
assume).
I'll attach both Xorg logs, from them it looks like Xorg is picking the
wrong size to attempt to compromise between the panel and phantom VGA1.
[This laptop has an actual VGA1 connector, nothing is connected to it
currently.]
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.2-1~experimental.1
** Command line:
BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/Heisenberg-root ro quiet
** Not tainted
** Kernel log:
[ 37.893445] usb 2-2: SerialNumber: 00101016400000005
[ 37.961887] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input9
[ 38.068366] Initializing USB Mass Storage driver...
[ 38.068998] scsi4 : usb-storage 2-2:1.0
[ 38.069173] usbcore: registered new interface driver usb-storage
[ 38.069177] USB Mass Storage support registered.
[ 38.076025] [drm] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1
[ 38.127310] fbcon: inteldrmfb (fb0) is primary device
[ 38.163113] media: Linux media interface: v0.10
[ 38.179422] Linux video capture interface: v2.00
[ 38.427377] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b036)
[ 38.432265] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input10
[ 38.432444] usbcore: registered new interface driver uvcvideo
[ 38.432445] USB Video Class driver (1.1.1)
[ 38.620461] ath: EEPROM regdomain: 0x60
[ 38.620462] ath: EEPROM indicates we should expect a direct regpair map
[ 38.620466] ath: Country alpha2 being used: 00
[ 38.620467] ath: Regpair used: 0x60
[ 38.650279] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 38.650688] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900107e0000, irq=17
[ 38.919770] Console: switching to colour frame buffer device 170x48
[ 38.927454] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 38.927458] i915 0000:00:02.0: registered panic notifier
[ 38.931737] acpi device:35: registered as cooling_device2
[ 38.931798] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 38.931948] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 38.932191] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 39.070830] scsi 4:0:0:0: CD-ROM ASUS SDRW-08D1S-U A202 PQ: 0 ANSI: 0
[ 39.117959] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 39.117964] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 39.118168] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 39.142245] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.142318] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 44.380756] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 44.713950] EXT4-fs (dm-1): re-mounted. Opts: user_xattr,errors=remount-ro
[ 45.316832] fuse init (API version 7.20)
[ 45.361038] loop: module loaded
[ 46.265711] Adding 3903484k swap on /dev/mapper/Heisenberg-swap. Priority:-1 extents:1 across:3903484k
[ 46.992988] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 48.106318] RPC: Registered named UNIX socket transport module.
[ 48.106323] RPC: Registered udp transport module.
[ 48.106326] RPC: Registered tcp transport module.
[ 48.106329] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.223349] FS-Cache: Loaded
[ 48.232568] Key type dns_resolver registered
[ 48.369155] FS-Cache: Netfs 'nfs' registered for caching
[ 48.438471] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 50.029665] Bluetooth: Core ver 2.16
[ 50.029699] NET: Registered protocol family 31
[ 50.029702] Bluetooth: HCI device and connection manager initialized
[ 50.030488] Bluetooth: HCI socket layer initialized
[ 50.030491] Bluetooth: L2CAP socket layer initialized
[ 50.030503] Bluetooth: SCO socket layer initialized
[ 50.035263] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 50.035267] Bluetooth: BNEP filters: protocol multicast
[ 50.035278] Bluetooth: BNEP socket layer initialized
[ 50.040042] Bluetooth: RFCOMM TTY layer initialized
[ 50.040060] Bluetooth: RFCOMM socket layer initialized
[ 50.040063] Bluetooth: RFCOMM ver 1.11
[ 50.267743] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.279596] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[ 50.293635] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.380853] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 50.649966] lp: driver loaded but no devices found
[ 50.670368] ppdev: user-space parallel port driver
[ 52.422301] wlan0: authenticate with 54:04:a6:d3:42:0c
[ 52.427029] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 52.434184] wlan0: send auth to 54:04:a6:d3:42:0c (try 1/3)
[ 52.435740] wlan0: authenticated
[ 52.440033] wlan0: associate with 54:04:a6:d3:42:0c (try 1/3)
[ 52.444749] wlan0: RX AssocResp from 54:04:a6:d3:42:0c (capab=0xc11 status=0 aid=2)
[ 52.444949] wlan0: associated
[ 52.444964] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.445145] cfg80211: Calling CRDA for country: US
[ 52.453150] ath: regdomain 0x8348 updated by CountryIE
[ 52.453155] ath: EEPROM regdomain: 0x8348
[ 52.453157] ath: EEPROM indicates we should expect a country code
[ 52.453161] ath: doing EEPROM country->regdmn map search
[ 52.453164] ath: country maps to regdmn code: 0x3a
[ 52.453166] ath: Country alpha2 being used: US
[ 52.453169] ath: Regpair used: 0x3a
[ 52.453203] cfg80211: Regulatory domain changed to country: US
[ 52.453206] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 52.453210] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 52.453214] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 52.453218] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.453222] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.453226] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.453230] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 113.660680] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 131.032143] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 134
[ 131.032153] Raw EDID:
[ 131.032159] 00 ff ff ff ff ff ff 00 3d cb 63 08 00 00 00 00
[ 131.032164] 00 12 01 03 80 68 3a 78 0a 7f 07 a3 55 49 9b 25
[ 131.032168] 10 47 4a af ce 00 01 01 01 01 01 01 01 01 01 01
[ 131.032173] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 131.032177] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 131.032181] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 131.032186] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 131.032190] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: UL30A
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 212
board_vendor: ASUSTeK Computer Inc.
board_name: UL30A
board_version: 1.0
** Loaded modules:
parport_pc
ppdev
lp
parport
rfcomm
bnep
bluetooth
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
ext2
loop
fuse
sg
sr_mod
cdrom
arc4
coretemp
ath9k
kvm_intel
ath9k_common
uvcvideo
ath9k_hw
videobuf2_vmalloc
kvm
videobuf2_memops
videobuf2_core
videodev
media
joydev
usb_storage
ath
snd_hda_codec_hdmi
mac80211
i915
cfg80211
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
microcode
drm_kms_helper
asus_laptop
snd_timer
drm
sparse_keymap
snd
atl1c
soundcore
iTCO_wdt
iTCO_vendor_support
rfkill
acpi_cpufreq
mperf
lpc_ich
mfd_core
uhci_hcd
ehci_pci
ehci_hcd
psmouse
serio_raw
evdev
pcspkr
i2c_algo_bit
video
battery
usbcore
processor
input_polldev
i2c_core
ac
button
usb_common
ext4
crc16
jbd2
mbcache
sha256_generic
cbc
dm_crypt
dm_mod
sd_mod
crc_t10dif
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: bde00000-bdffffff
Prefetchable memory behind bridge: 00000000be000000-00000000be1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000be200000-00000000be3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000be400000-00000000be5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe9fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=32]
Region 5: Memory at fe9fb000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8132 Fast Ethernet [1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:14e5]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 002: ID 04f2:b036 Chicony Electronics Co., Ltd Asus Integrated 0.3M UVC Webcam
Bus 002 Device 002: ID 13fd:1640 Initio Corporation ASUS SDRW-08D1S-U DVD-RW
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (150, 'unstable'), (125, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.3-1~experimental.1
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/Heisenberg-root ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdda0000-0x00000000bddaefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bddaf000-0x00000000bdddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. UL30A /UL30A , BIOS 212 12/28/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbdda0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbdd9ffff]
[ 0.000000] [mem 0x00000000-0xbdbfffff] page 2M
[ 0.000000] [mem 0xbdc00000-0xbdd9ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbdd9ffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbdd9e000-0xbdd9ffff]
[ 0.000000] RAMDISK: [mem 0x37894000-0x37c41fff]
[ 0.000000] ACPI: RSDP 00000000000f9180 00024 (v02 122809)
[ 0.000000] ACPI: XSDT 00000000bdda0100 0008C (v01 _ASUS_ Notebook 20091228 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bdda0290 000F4 (v03 122809 FACP0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bdda0680 0D0BF (v01 UL30A UL30A100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bddaf000 00040
[ 0.000000] ACPI: APIC 00000000bdda0390 0005C (v01 122809 APIC0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bdda0430 0003C (v01 122809 OEMMCFG 20091228 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bdda0470 00176 (v01 _ASUS_ Notebook 20091228 MSFT 00000097)
[ 0.000000] ACPI: ECDT 00000000bdda0620 00054 (v01 122809 OEMECDT 20091228 MSFT 00000097)
[ 0.000000] ACPI: DBGP 00000000bdda03f0 00034 (v01 122809 DBGP0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: BOOT 00000000bdda05f0 00028 (v01 122809 BOOT0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bddaf040 00071 (v01 122809 OEMB0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bddad740 00038 (v01 122809 OEMHPET 20091228 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000bddaf0c0 02024 (v01 122809 GMCHSCI 20091228 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bddb10f0 00150 (v01 122809 DMAR0952 20091228 MSFT 00000097)
[ 0.000000] ACPI: ATKG 00000000bddb1440 08024 (v01 _ASUS_ OEMATKG 20091228 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bddb9f10 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffc000-0x13fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00096fff]
[ 0.000000] node 0: [mem 0x00100000-0xbdd9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1039655
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10576 pages used for memmap
[ 0.000000] DMA32 zone: 762960 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdda0000 - 00000000bddaf000
[ 0.000000] PM: Registered nosave memory: 00000000bddaf000 - 00000000bdde0000
[ 0.000000] PM: Registered nosave memory: 00000000bdde0000 - 00000000bde00000
[ 0.000000] PM: Registered nosave memory: 00000000bde00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] e820: [mem 0xbde00000-0xfed1ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84032 r8192 d22464 u1048576
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025433
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/Heisenberg-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4022668k/5242880k available (3626k kernel code, 1084260k absent, 135952k reserved, 3112k data, 616k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1299.910 MHz processor
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.82 BogoMIPS (lpj=5199640)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004083] Security Framework initialized
[ 0.004092] AppArmor: AppArmor disabled by boot time parameter
[ 0.008137] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010752] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011954] Mount-cache hash table entries: 256
[ 0.012373] Initializing cgroup subsys cpuacct
[ 0.012379] Initializing cgroup subsys memory
[ 0.012402] Initializing cgroup subsys devices
[ 0.012406] Initializing cgroup subsys freezer
[ 0.012409] Initializing cgroup subsys net_cls
[ 0.012413] Initializing cgroup subsys blkio
[ 0.012417] Initializing cgroup subsys perf_event
[ 0.012469] CPU: Physical Processor ID: 0
[ 0.012472] CPU: Processor Core ID: 0
[ 0.012476] mce: CPU supports 6 MCE banks
[ 0.012491] CPU0: Thermal monitoring enabled (TM2)
[ 0.012497] process: using mwait in idle threads
[ 0.012506] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012506] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.012506] tlb_flushall_shift: -1
[ 0.012659] Freeing SMP alternatives: 12k freed
[ 0.013449] ACPI: Core revision 20121018
[ 0.028130] dmar: Host address width 36
[ 0.028135] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.028149] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.028153] dmar: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.028162] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.028166] dmar: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.028175] dmar: IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.028179] dmar: RMRR base: 0x000000000e1000 end: 0x000000000e3fff
[ 0.028183] dmar: RMRR base: 0x000000bde00000 end: 0x000000bfffffff
[ 0.028186] dmar: RMRR base: 0x000000bddf0000 end: 0x000000bddfffff
[ 0.028779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069477] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] smpboot: Booting Node 0, Processors #1 OK
[ 0.080032] Brought up 2 CPUs
[ 0.080039] smpboot: Total of 2 processors activated (5199.64 BogoMIPS)
[ 0.080162] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084150] devtmpfs: initialized
[ 0.089808] PM: Registering ACPI NVS region [mem 0xbddaf000-0xbdddffff] (200704 bytes)
[ 0.089808] regulator-dummy: no parameters
[ 0.089808] NET: Registered protocol family 16
[ 0.089808] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.089808] ACPI: bus type pci registered
[ 0.089808] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.089808] PCI: not using MMCONFIG
[ 0.089808] PCI: Using configuration type 1 for base access
[ 0.092072] bio: create slab <bio-0> at 0
[ 0.092132] ACPI: Added _OSI(Module Device)
[ 0.092132] ACPI: Added _OSI(Processor Device)
[ 0.092132] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092132] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.097602] ACPI: EC: EC description table is found, configuring boot EC
[ 0.097610] ACPI: EC: Look up EC in DSDT
[ 0.107551] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.112209] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.112538] ACPI BIOS Bug: Warning: Incorrect checksum in table [ATKG] - 0x52, should be 0xFE (20121018/tbutils-324)
[ 0.113068] ACPI: SSDT 00000000bddb9540 001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.113951] ACPI: Dynamic OEM Table Load:
[ 0.113956] ACPI: SSDT (null) 001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.114269] ACPI: SSDT 00000000bddb97a0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.115112] ACPI: Dynamic OEM Table Load:
[ 0.115116] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.115632] ACPI: SSDT 00000000bddb9470 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.116506] ACPI: Dynamic OEM Table Load:
[ 0.116511] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.116740] ACPI: SSDT 00000000bddb9710 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.117585] ACPI: Dynamic OEM Table Load:
[ 0.117589] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.118118] ACPI: Interpreter enabled
[ 0.118133] ACPI: (supports S0 S3 S4 S5)
[ 0.118175] ACPI: Using IOAPIC for interrupt routing
[ 0.118240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.120966] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.163067] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.163580] ACPI: No dock devices found.
[ 0.163590] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.163759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.163765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.164573] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.165068] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.165445] PCI host bridge to bus 0000:00
[ 0.165452] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165467] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165472] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165477] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[ 0.165495] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.165527] DMAR: Forcing write-buffer flush capability
[ 0.165529] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.165573] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.165594] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.165608] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.165619] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
[ 0.165679] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.165698] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.165827] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165906] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
[ 0.166005] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166083] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
[ 0.166182] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.166261] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
[ 0.166375] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166411] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.166563] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166615] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166645] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.166780] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166827] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.167018] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.167157] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.167213] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.167352] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.167408] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167488] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.167588] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167668] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
[ 0.167767] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167846] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.167961] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.168008] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.168161] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.168204] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.168330] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.168529] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.168568] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.168585] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.168602] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.168619] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.168636] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.168653] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.168749] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168861] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.168987] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.169025] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.169198] pci 0000:02:00.0: supports D1
[ 0.169203] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.176026] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.176039] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.176160] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000
[ 0.176199] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.176220] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.176389] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184026] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.184035] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.184044] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.184171] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.184191] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.184197] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.184202] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.184207] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.184212] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[ 0.184357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.184435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.204827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.204923] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.205012] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.205102] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.205193] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.205281] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.205372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.205466] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.205603] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.205603] vgaarb: loaded
[ 0.205603] vgaarb: bridge control possible 0000:00:02.0
[ 0.205603] PCI: Using ACPI for IRQ routing
[ 0.219036] PCI: pci_cache_line_size set to 64 bytes
[ 0.219142] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
[ 0.219147] e820: reserve RAM buffer [mem 0xbdda0000-0xbfffffff]
[ 0.219383] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.219392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.219400] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.221026] Switching to clocksource hpet
[ 0.223677] pnp: PnP ACPI init
[ 0.223701] ACPI: bus type pnp registered
[ 0.223804] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.223811] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223874] pnp 00:01: [dma 4]
[ 0.223918] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.223993] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.224118] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.224266] pnp 00:04: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.224324] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.224389] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224768] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.224775] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.224781] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.224786] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.224792] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.224799] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.224804] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.224810] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.224816] system 00:07: [mem 0xfed90000-0xfed90fff] could not be reserved
[ 0.224822] system 00:07: [mem 0xfed91000-0xfed91fff] could not be reserved
[ 0.224828] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.224834] system 00:07: [mem 0xfed93000-0xfed93fff] could not be reserved
[ 0.224840] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.224846] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.224852] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225011] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.225179] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.225186] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.225192] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225334] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.225341] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225510] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.225516] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.225522] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.225528] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.225534] system 00:0b: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.225540] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.225546] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225715] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.225721] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226302] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.226309] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.226315] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.226321] system 00:0d: [mem 0x00100000-0xbddfffff] could not be reserved
[ 0.226327] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.226604] pnp: PnP ACPI: found 14 devices
[ 0.226607] ACPI: ACPI bus type pnp unregistered
[ 0.235702] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.235711] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.235717] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.235735] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.235742] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.235760] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.235789] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.235795] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.235801] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.235807] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.235812] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.235818] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.235827] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbde00000-0xbdffffff]
[ 0.235834] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref]
[ 0.235842] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.235849] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.235856] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.235862] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.235869] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.235876] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.235886] pci 0000:00:1c.0: bridge window [mem 0xbde00000-0xbdffffff]
[ 0.235895] pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref]
[ 0.235906] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.235913] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.235923] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.235931] pci 0000:00:1c.1: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.235943] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.235950] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.235960] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.235968] pci 0000:00:1c.5: bridge window [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.235980] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.236022] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.236046] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.236076] pci 0000:00:1e.0: setting latency timer to 64
[ 0.236084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.236089] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.236093] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.236098] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.236103] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.236108] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.236113] pci_bus 0000:01: resource 1 [mem 0xbde00000-0xbdffffff]
[ 0.236117] pci_bus 0000:01: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref]
[ 0.236122] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.236127] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.236132] pci_bus 0000:02: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.236137] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.236141] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.236146] pci_bus 0000:03: resource 2 [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.236151] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.236156] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.236161] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.236165] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.236170] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.236256] NET: Registered protocol family 2
[ 0.236649] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.236979] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.237220] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.237281] TCP: reno registered
[ 0.237296] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.237346] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.237483] NET: Registered protocol family 1
[ 0.237509] pci 0000:00:02.0: Boot video device
[ 0.237812] PCI: CLS 32 bytes, default 64
[ 0.237883] Unpacking initramfs...
[ 0.381719] Freeing initrd memory: 3768k freed
[ 0.383571] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.383579] software IO TLB [mem 0xb9d9e000-0xbdd9e000] (64MB) mapped at [ffff8800b9d9e000-ffff8800bdd9dfff]
[ 0.383644] Simple Boot Flag at 0x51 set to 0x1
[ 0.384255] audit: initializing netlink socket (disabled)
[ 0.384279] type=2000 audit(1364085960.384:1): initialized
[ 0.418123] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.418926] VFS: Disk quotas dquot_6.5.2
[ 0.418971] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.419126] msgmni has been set to 7864
[ 0.419489] alg: No test for stdrng (krng)
[ 0.419534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.419583] io scheduler noop registered
[ 0.419587] io scheduler deadline registered
[ 0.419614] io scheduler cfq registered (default)
[ 0.419829] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.420086] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.420307] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.420536] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.420546] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.420584] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.420589] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.420597] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.420634] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.420639] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.420647] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.420678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.420753] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 8086 ss_did 294a
[ 0.420795] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.420807] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.420810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.421475] intel_idle: does not run on family 6 model 23
[ 0.421536] GHES: HEST is not enabled!
[ 0.421643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.422615] Linux agpgart interface v0.103
[ 0.422753] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.422848] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.424529] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.424707] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.424951] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.428684] i8042: Detected active multiplexing controller, rev 1.1
[ 0.431471] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.431482] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.431539] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.431588] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.431633] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.431867] mousedev: PS/2 mouse device common for all mice
[ 0.431948] rtc_cmos 00:02: RTC can wake from S4
[ 0.432187] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.432228] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.432247] cpuidle: using governor ladder
[ 0.432250] cpuidle: using governor menu
[ 0.432291] drop_monitor: Initializing network drop monitor service
[ 0.432440] TCP: cubic registered
[ 0.432501] NET: Registered protocol family 10
[ 0.432848] mip6: Mobile IPv6
[ 0.432853] NET: Registered protocol family 17
[ 0.433296] PM: Hibernation image not present or could not be loaded.
[ 0.433315] registered taskstats version 1
[ 0.434349] rtc_cmos 00:02: setting system clock to 2013-03-24 00:46:00 UTC (1364085960)
[ 0.436653] Freeing unused kernel memory: 616k freed
[ 0.436870] Write protecting the kernel read-only data: 6144k
[ 0.440181] Freeing unused kernel memory: 460k freed
[ 0.443885] Freeing unused kernel memory: 520k freed
[ 0.469017] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.568661] udevd[60]: starting version 175
[ 0.654945] SCSI subsystem initialized
[ 0.677573] ACPI: bus type scsi registered
[ 0.681028] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.681035] ACPI: Thermal Zone [THRM] (51 C)
[ 0.681515] libata version 3.00 loaded.
[ 0.682766] ahci 0000:00:1f.2: version 3.0
[ 0.682858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.682925] ahci: SSS flag set, parallel bus scan disabled
[ 0.682962] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 0.682969] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.682978] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.688144] scsi0 : ahci
[ 0.691293] scsi1 : ahci
[ 0.691448] scsi2 : ahci
[ 0.691570] scsi3 : ahci
[ 0.691665] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
[ 0.691669] ata2: DUMMY
[ 0.691672] ata3: DUMMY
[ 0.691675] ata4: DUMMY
[ 1.008045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.010147] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.010469] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.010476] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.012385] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[ 1.012390] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.014901] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.015216] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.015222] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.017135] ata1.00: configured for UDMA/133
[ 1.017357] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
[ 1.024673] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.024807] sd 0:0:0:0: [sda] Write Protect is off
[ 1.024814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.024857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.039427] sda: sda1 sda2 sda3 sda4
[ 1.040142] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.380032] tsc: Refined TSC clocksource calibration: 1299.999 MHz
[ 1.380041] Switching to clocksource tsc
[ 1.867947] device-mapper: uevent: version 1.0.3
[ 1.868235] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 8.843957] bio: create slab <bio-1> at 1
[ 18.377334] bio: create slab <bio-1> at 1
[ 18.558294] bio: create slab <bio-1> at 1
[ 18.939438] PM: Starting manual resume from disk
[ 18.939444] PM: Hibernation image partition 254:2 present
[ 18.939447] PM: Looking for hibernation image.
[ 18.939826] PM: Image not found (code -22)
[ 18.939830] PM: Hibernation image not present or could not be loaded.
[ 19.008362] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.774304] udevd[447]: starting version 175
[ 34.576318] ACPI: AC Adapter [AC0] (on-line)
[ 34.577631] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 34.577642] ACPI: Sleep Button [SLPB]
[ 34.577743] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 34.581931] ACPI: Lid Switch [LID]
[ 34.582047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 34.582055] ACPI: Power Button [PWRF]
[ 34.588066] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 34.588080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.588086] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 34.588094] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.588097] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 34.588105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.588108] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 34.602135] ACPI: Requesting acpi_cpufreq
[ 34.604479] Monitor-Mwait will be used to enter C-1 state
[ 34.604533] Monitor-Mwait will be used to enter C-3 state
[ 34.604547] tsc: Marking TSC unstable due to TSC halts in idle
[ 34.604557] ACPI: acpi_idle registered with cpuidle
[ 34.619652] Switching to clocksource hpet
[ 34.624200] ACPI: Battery Slot [BAT0] (battery present)
[ 34.872565] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 35.019343] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 35.124597] asus_laptop: Asus Laptop Support version 0.42
[ 35.124830] asus_laptop: UL30A model detected
[ 35.125527] asus_laptop: Backlight controlled by ACPI video driver
[ 35.125623] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 35.156522] ACPI: bus type usb registered
[ 35.157104] usbcore: registered new interface driver usbfs
[ 35.157400] usbcore: registered new interface driver hub
[ 35.157483] usbcore: registered new device driver usb
[ 35.176353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 35.177599] ehci-pci: EHCI PCI platform driver
[ 35.177668] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 35.177675] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 35.177686] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 35.177712] ehci-pci 0000:00:1a.7: debug port 1
[ 35.181623] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 35.181657] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 35.191435] cfg80211: Calling CRDA to update world regulatory domain
[ 35.192049] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 35.192119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 35.192125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.192129] usb usb1: Product: EHCI Host Controller
[ 35.192133] usb usb1: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 35.192137] usb usb1: SerialNumber: 0000:00:1a.7
[ 35.192391] hub 1-0:1.0: USB hub found
[ 35.192400] hub 1-0:1.0: 6 ports detected
[ 35.194764] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 35.194772] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 35.194783] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 35.194805] ehci-pci 0000:00:1d.7: debug port 1
[ 35.198713] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 35.198758] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 35.208063] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 35.208101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 35.208106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.208110] usb usb2: Product: EHCI Host Controller
[ 35.208114] usb usb2: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 35.208118] usb usb2: SerialNumber: 0000:00:1d.7
[ 35.208491] hub 2-0:1.0: USB hub found
[ 35.208500] hub 2-0:1.0: 6 ports detected
[ 35.229406] cfg80211: World regulatory domain updated:
[ 35.229411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 35.229416] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.229420] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 35.229424] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 35.229428] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.229431] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.242047] platform microcode: firmware: agent aborted loading intel-ucode/06-17-0a (not found?)
[ 35.242212] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 35.246275] platform microcode: firmware: agent aborted loading intel-ucode/06-17-0a (not found?)
[ 35.246769] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 35.284576] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 35.346664] [drm] Initialized drm 1.1.0 20060810
[ 35.397610] uhci_hcd: USB Universal Host Controller Interface driver
[ 35.397673] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 35.397679] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 35.397692] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 35.397753] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 35.397824] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.397830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.397834] usb usb3: Product: UHCI Host Controller
[ 35.397838] usb usb3: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.397842] usb usb3: SerialNumber: 0000:00:1a.0
[ 35.398167] hub 3-0:1.0: USB hub found
[ 35.398176] hub 3-0:1.0: 2 ports detected
[ 35.398931] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 35.398938] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 35.398947] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 35.398999] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 35.399054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.399060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.399064] usb usb4: Product: UHCI Host Controller
[ 35.399068] usb usb4: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.399072] usb usb4: SerialNumber: 0000:00:1a.1
[ 35.399369] hub 4-0:1.0: USB hub found
[ 35.399377] hub 4-0:1.0: 2 ports detected
[ 35.400107] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 35.400114] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 35.400124] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 35.400174] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 35.400229] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.400234] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.400238] usb usb5: Product: UHCI Host Controller
[ 35.400242] usb usb5: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.400246] usb usb5: SerialNumber: 0000:00:1a.2
[ 35.400458] hub 5-0:1.0: USB hub found
[ 35.400466] hub 5-0:1.0: 2 ports detected
[ 35.401166] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 35.401173] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.401183] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 35.401220] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 35.401275] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.401280] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.401284] usb usb6: Product: UHCI Host Controller
[ 35.401288] usb usb6: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.401292] usb usb6: SerialNumber: 0000:00:1d.0
[ 35.401507] hub 6-0:1.0: USB hub found
[ 35.401515] hub 6-0:1.0: 2 ports detected
[ 35.402223] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 35.402229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.402241] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 35.402275] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 35.402333] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.402338] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.402343] usb usb7: Product: UHCI Host Controller
[ 35.402347] usb usb7: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.402351] usb usb7: SerialNumber: 0000:00:1d.1
[ 35.402641] hub 7-0:1.0: USB hub found
[ 35.402649] hub 7-0:1.0: 2 ports detected
[ 35.403348] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 35.403355] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.403365] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 35.403400] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 35.403455] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 35.403460] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.403464] usb usb8: Product: UHCI Host Controller
[ 35.403468] usb usb8: Manufacturer: Linux 3.8-trunk-amd64 uhci_hcd
[ 35.403472] usb usb8: SerialNumber: 0000:00:1d.2
[ 35.403684] hub 8-0:1.0: USB hub found
[ 35.403692] hub 8-0:1.0: 2 ports detected
[ 35.488330] i915 0000:00:02.0: setting latency timer to 64
[ 35.492400] iTCO_vendor_support: vendor-support=0
[ 35.504036] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 35.516142] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 35.516159] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 35.516162] [drm] Driver supports precise vblank timestamp query.
[ 35.516247] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 35.576049] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 35.576103] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 35.576282] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 35.739219] usb 1-3: New USB device found, idVendor=04f2, idProduct=b036
[ 35.739226] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 35.739230] usb 1-3: Product: USB2.0 0.3M UVC WebCam
[ 35.739234] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 35.739238] usb 1-3: SerialNumber: SN0001
[ 35.744042] [drm] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1
[ 35.786241] fbcon: inteldrmfb (fb0) is primary device
[ 35.852055] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 35.961092] media: Linux media interface: v0.10
[ 35.980219] Linux video capture interface: v2.00
[ 35.985315] usb 2-2: New USB device found, idVendor=13fd, idProduct=1640
[ 35.985319] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 35.985321] usb 2-2: Product: SDRW-08D1S-U
[ 35.985324] usb 2-2: Manufacturer: Initio
[ 35.985326] usb 2-2: SerialNumber: 00101016400000005
[ 35.991014] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 36.029269] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 36.065480] Initializing USB Mass Storage driver...
[ 36.065640] scsi4 : usb-storage 2-2:1.0
[ 36.065766] usbcore: registered new interface driver usb-storage
[ 36.065767] USB Mass Storage support registered.
[ 36.104673] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b036)
[ 36.109418] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6
[ 36.109548] usbcore: registered new interface driver uvcvideo
[ 36.109549] USB Video Class driver (1.1.1)
[ 36.167557] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
[ 36.232343] ath: EEPROM regdomain: 0x60
[ 36.232344] ath: EEPROM indicates we should expect a direct regpair map
[ 36.232347] ath: Country alpha2 being used: 00
[ 36.232348] ath: Regpair used: 0x60
[ 36.266920] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 36.267322] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900107a0000, irq=17
[ 36.592972] Console: switching to colour frame buffer device 128x48
[ 36.597745] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 36.597749] i915 0000:00:02.0: registered panic notifier
[ 36.602040] acpi device:35: registered as cooling_device2
[ 36.602104] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 36.602194] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 36.602315] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 36.602498] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 37.067181] scsi 4:0:0:0: CD-ROM ASUS SDRW-08D1S-U A202 PQ: 0 ANSI: 0
[ 37.108394] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 37.108402] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 37.109086] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 37.136288] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.136582] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 37.666663] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 37.666869] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 37.666995] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 42.313402] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 42.665762] EXT4-fs (dm-1): re-mounted. Opts: user_xattr,errors=remount-ro
[ 43.486385] fuse init (API version 7.20)
[ 43.526366] loop: module loaded
[ 44.220802] Adding 3903484k swap on /dev/mapper/Heisenberg-swap. Priority:-1 extents:1 across:3903484k
[ 44.923050] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 45.963701] RPC: Registered named UNIX socket transport module.
[ 45.963707] RPC: Registered udp transport module.
[ 45.963709] RPC: Registered tcp transport module.
[ 45.963712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 46.092206] FS-Cache: Loaded
[ 46.109635] Key type dns_resolver registered
[ 46.239078] FS-Cache: Netfs 'nfs' registered for caching
[ 46.321094] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 47.853129] Bluetooth: Core ver 2.16
[ 47.853159] NET: Registered protocol family 31
[ 47.853162] Bluetooth: HCI device and connection manager initialized
[ 47.853175] Bluetooth: HCI socket layer initialized
[ 47.853180] Bluetooth: L2CAP socket layer initialized
[ 47.853190] Bluetooth: SCO socket layer initialized
[ 47.856516] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.856520] Bluetooth: BNEP filters: protocol multicast
[ 47.856531] Bluetooth: BNEP socket layer initialized
[ 47.857232] Bluetooth: RFCOMM TTY layer initialized
[ 47.857245] Bluetooth: RFCOMM socket layer initialized
[ 47.857248] Bluetooth: RFCOMM ver 1.11
[ 48.173984] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.183803] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[ 48.197768] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.200808] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 48.409671] lp: driver loaded but no devices found
[ 48.413661] ppdev: user-space parallel port driver
[ 50.684]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 50.684] X Protocol Version 11, Revision 0
[ 50.684] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[ 50.684] Current Operating System: Linux Heisenberg 3.8-trunk-amd64 #1 SMP Debian 3.8.2-1~experimental.1 x86_64
[ 50.684] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/Heisenberg-root ro quiet
[ 50.684] Build Date: 23 February 2013 02:40:45PM
[ 50.684] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>)
[ 50.684] Current version of pixman: 0.26.0
[ 50.684] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.684] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.684] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 20:52:44 2013
[ 50.703] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.703] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 50.703] (==) No Layout section. Using the first Screen section.
[ 50.703] (==) No screen section available. Using defaults.
[ 50.703] (**) |-->Screen "Default Screen Section" (0)
[ 50.703] (**) | |-->Monitor "<default monitor>"
[ 50.703] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50.703] (==) Automatically adding devices
[ 50.703] (==) Automatically enabling devices
[ 50.704] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 50.704] Entry deleted from font path.
[ 50.704] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 50.704] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.704] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.704] (II) Loader magic: 0x7f315154bae0
[ 50.704] (II) Module ABI versions:
[ 50.704] X.Org ANSI C Emulation: 0.4
[ 50.704] X.Org Video Driver: 12.1
[ 50.704] X.Org XInput driver : 16.0
[ 50.704] X.Org Server Extension : 6.0
[ 50.706] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 7, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 50.706] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 7, Mem @ 0xfe800000/1048576
[ 50.706] (II) Open ACPI successful (/var/run/acpid.socket)
[ 50.706] (II) LoadModule: "extmod"
[ 50.773] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.774] (II) Module extmod: vendor="X.Org Foundation"
[ 50.774] compiled for 1.12.4, module version = 1.0.0
[ 50.774] Module class: X.Org Server Extension
[ 50.774] ABI class: X.Org Server Extension, version 6.0
[ 50.774] (II) Loading extension SELinux
[ 50.774] (II) Loading extension MIT-SCREEN-SAVER
[ 50.774] (II) Loading extension XFree86-VidModeExtension
[ 50.774] (II) Loading extension XFree86-DGA
[ 50.774] (II) Loading extension DPMS
[ 50.774] (II) Loading extension XVideo
[ 50.774] (II) Loading extension XVideo-MotionCompensation
[ 50.774] (II) Loading extension X-Resource
[ 50.774] (II) LoadModule: "dbe"
[ 50.774] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.774] (II) Module dbe: vendor="X.Org Foundation"
[ 50.774] compiled for 1.12.4, module version = 1.0.0
[ 50.775] Module class: X.Org Server Extension
[ 50.775] ABI class: X.Org Server Extension, version 6.0
[ 50.775] (II) Loading extension DOUBLE-BUFFER
[ 50.775] (II) LoadModule: "glx"
[ 50.775] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.775] (II) Module glx: vendor="X.Org Foundation"
[ 50.775] compiled for 1.12.4, module version = 1.0.0
[ 50.775] ABI class: X.Org Server Extension, version 6.0
[ 50.775] (==) AIGLX enabled
[ 50.775] (II) Loading extension GLX
[ 50.775] (II) LoadModule: "record"
[ 50.776] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.776] (II) Module record: vendor="X.Org Foundation"
[ 50.776] compiled for 1.12.4, module version = 1.13.0
[ 50.776] Module class: X.Org Server Extension
[ 50.776] ABI class: X.Org Server Extension, version 6.0
[ 50.776] (II) Loading extension RECORD
[ 50.776] (II) LoadModule: "dri"
[ 50.777] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.934] (II) Module dri: vendor="X.Org Foundation"
[ 50.934] compiled for 1.12.4, module version = 1.0.0
[ 50.934] ABI class: X.Org Server Extension, version 6.0
[ 50.934] (II) Loading extension XFree86-DRI
[ 50.934] (II) LoadModule: "dri2"
[ 50.934] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.934] (II) Module dri2: vendor="X.Org Foundation"
[ 50.934] compiled for 1.12.4, module version = 1.2.0
[ 50.934] ABI class: X.Org Server Extension, version 6.0
[ 50.935] (II) Loading extension DRI2
[ 50.935] (==) Matched intel as autoconfigured driver 0
[ 50.935] (==) Matched vesa as autoconfigured driver 1
[ 50.935] (==) Matched fbdev as autoconfigured driver 2
[ 50.935] (==) Assigned the driver to the xf86ConfigLayout
[ 50.935] (II) LoadModule: "intel"
[ 50.935] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 50.936] (II) Module intel: vendor="X.Org Foundation"
[ 50.936] compiled for 1.12.4, module version = 2.20.14
[ 50.936] Module class: X.Org Video Driver
[ 50.936] ABI class: X.Org Video Driver, version 12.1
[ 50.936] (II) LoadModule: "vesa"
[ 50.936] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 50.936] (II) Module vesa: vendor="X.Org Foundation"
[ 50.936] compiled for 1.12.1, module version = 2.3.1
[ 50.936] Module class: X.Org Video Driver
[ 50.936] ABI class: X.Org Video Driver, version 12.0
[ 50.936] (II) LoadModule: "fbdev"
[ 50.937] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 50.937] (II) Module fbdev: vendor="X.Org Foundation"
[ 50.937] compiled for 1.12.1, module version = 0.4.2
[ 50.937] ABI class: X.Org Video Driver, version 12.0
[ 50.937] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 50.938] (II) VESA: driver for VESA chipsets: vesa
[ 50.938] (II) FBDEV: driver for framebuffer: fbdev
[ 50.938] (++) using VT number 7
[ 50.950] drmOpenDevice: node name is /dev/dri/card0
[ 50.950] drmOpenDevice: open result is 8, (OK)
[ 50.950] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 50.950] drmOpenDevice: node name is /dev/dri/card0
[ 50.950] drmOpenDevice: open result is 8, (OK)
[ 50.950] drmOpenByBusid: drmOpenMinor returns 8
[ 50.950] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 50.951] (WW) Falling back to old probe method for vesa
[ 50.951] (WW) Falling back to old probe method for fbdev
[ 50.951] (II) Loading sub module "fbdevhw"
[ 50.951] (II) LoadModule: "fbdevhw"
[ 50.951] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 50.951] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 50.951] compiled for 1.12.4, module version = 0.0.2
[ 50.951] ABI class: X.Org Video Driver, version 12.1
[ 50.951] drmOpenDevice: node name is /dev/dri/card0
[ 50.951] drmOpenDevice: open result is 9, (OK)
[ 50.951] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 50.951] drmOpenDevice: node name is /dev/dri/card0
[ 50.952] drmOpenDevice: open result is 9, (OK)
[ 50.952] drmOpenByBusid: drmOpenMinor returns 9
[ 50.952] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 50.952] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.952] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 50.952] (==) intel(0): RGB weight 888
[ 50.952] (==) intel(0): Default visual is TrueColor
[ 50.952] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 50.952] (**) intel(0): Relaxed fencing enabled
[ 50.952] (**) intel(0): Wait on SwapBuffers? enabled
[ 50.952] (**) intel(0): Triple buffering? enabled
[ 50.952] (**) intel(0): Framebuffer tiled
[ 50.952] (**) intel(0): Pixmaps tiled
[ 50.952] (**) intel(0): 3D buffers tiled
[ 50.952] (**) intel(0): SwapBuffers wait enabled
[ 50.952] (==) intel(0): video overlay key set to 0x101fe
[ 50.952] (II) intel(0): Output LVDS1 has no monitor section
[ 50.952] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 51.011] (II) intel(0): Output VGA1 has no monitor section
[ 51.011] (II) intel(0): Output HDMI1 has no monitor section
[ 51.011] (II) intel(0): Output DP1 has no monitor section
[ 51.060] (II) intel(0): Output DP2 has no monitor section
[ 51.060] (II) intel(0): EDID for output LVDS1
[ 51.060] (II) intel(0): Manufacturer: AUO Model: 102c Serial#: 0
[ 51.060] (II) intel(0): Year: 2008 Week: 1
[ 51.060] (II) intel(0): EDID Version: 1.3
[ 51.060] (II) intel(0): Digital Display Input
[ 51.060] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 51.060] (II) intel(0): Gamma: 2.20
[ 51.060] (II) intel(0): No DPMS capabilities specified
[ 51.060] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 51.060] (II) intel(0): First detailed timing is preferred mode
[ 51.060] (II) intel(0): redX: 0.607 redY: 0.351 greenX: 0.330 greenY: 0.619
[ 51.060] (II) intel(0): blueX: 0.149 blueY: 0.104 whiteX: 0.302 whiteY: 0.321
[ 51.060] (II) intel(0): Manufacturer's mask: 0
[ 51.060] (II) intel(0): Supported detailed timing:
[ 51.060] (II) intel(0): clock: 72.0 MHz Image Size: 293 x 164 mm
[ 51.060] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0
[ 51.060] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 51.060] (II) intel(0): Unknown vendor-specific block f
[ 51.060] (II) intel(0): AUO
[ 51.060] (II) intel(0): B133XW01 V0
[ 51.060] (II) intel(0): EDID (in hex):
[ 51.060] (II) intel(0): 00ffffffffffff0006af2c1000000000
[ 51.060] (II) intel(0): 01120103801d10780aba659b59549e26
[ 51.060] (II) intel(0): 1a4d5200000001010101010101010101
[ 51.060] (II) intel(0): 010101010101201c5680500023303020
[ 51.060] (II) intel(0): 360025a4100000180000000f00000000
[ 51.060] (II) intel(0): 00000000000000000020000000fe0041
[ 51.060] (II) intel(0): 554f0a202020202020202020000000fe
[ 51.060] (II) intel(0): 004231333358573031205630200a00bc
[ 51.060] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 51.060] (II) intel(0): Printing DDC gathered Modelines:
[ 51.060] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 51.061] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 51.061] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 51.061] (II) intel(0): Printing probed modes for output LVDS1
[ 51.061] (II) intel(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 51.061] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 51.061] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 51.061] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 51.061] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 51.061] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 51.061] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 51.125] (II) intel(0): EDID for output VGA1
[ 51.125] (II) intel(0): EDID for output HDMI1
[ 51.125] (II) intel(0): EDID for output DP1
[ 51.172] (II) intel(0): EDID for output DP2
[ 51.172] (II) intel(0): Output LVDS1 connected
[ 51.172] (II) intel(0): Output VGA1 disconnected
[ 51.172] (II) intel(0): Output HDMI1 disconnected
[ 51.172] (II) intel(0): Output DP1 disconnected
[ 51.172] (II) intel(0): Output DP2 disconnected
[ 51.172] (II) intel(0): Using exact sizes for initial modes
[ 51.172] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 51.172] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 51.172] (II) intel(0): Kernel page flipping support detected, enabling
[ 51.172] (**) intel(0): Display dimensions: (290, 160) mm
[ 51.172] (**) intel(0): DPI set to (119, 121)
[ 51.172] (II) Loading sub module "fb"
[ 51.172] (II) LoadModule: "fb"
[ 51.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 51.173] (II) Module fb: vendor="X.Org Foundation"
[ 51.173] compiled for 1.12.4, module version = 1.0.0
[ 51.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 51.173] (II) Loading sub module "dri2"
[ 51.173] (II) LoadModule: "dri2"
[ 51.174] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 51.174] (II) Module dri2: vendor="X.Org Foundation"
[ 51.174] compiled for 1.12.4, module version = 1.2.0
[ 51.174] ABI class: X.Org Server Extension, version 6.0
[ 51.174] (II) UnloadModule: "vesa"
[ 51.174] (II) Unloading vesa
[ 51.174] (II) UnloadModule: "fbdev"
[ 51.174] (II) Unloading fbdev
[ 51.174] (II) UnloadSubModule: "fbdevhw"
[ 51.174] (II) Unloading fbdevhw
[ 51.174] (==) Depth 24 pixmap format is 32 bpp
[ 51.174] (II) intel(0): [DRI2] Setup complete
[ 51.174] (II) intel(0): [DRI2] DRI driver: i965
[ 51.174] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 51.192] (II) UXA(0): Driver registered support for the following operations:
[ 51.192] (II) solid
[ 51.192] (II) copy
[ 51.192] (II) composite (RENDER acceleration)
[ 51.192] (II) put_image
[ 51.192] (II) get_image
[ 51.192] (==) intel(0): Backing store disabled
[ 51.192] (==) intel(0): Silken mouse enabled
[ 51.192] (II) intel(0): Initializing HW Cursor
[ 51.192] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 51.195] (==) intel(0): DPMS enabled
[ 51.195] (==) intel(0): Intel XvMC decoder enabled
[ 51.195] (II) intel(0): Set up textured video
[ 51.195] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 51.195] (II) intel(0): direct rendering: DRI2 Enabled
[ 51.195] (==) intel(0): hotplug detection: "enabled"
[ 51.220] (--) RandR disabled
[ 51.220] (II) Initializing built-in extension Generic Event Extension
[ 51.220] (II) Initializing built-in extension SHAPE
[ 51.220] (II) Initializing built-in extension MIT-SHM
[ 51.220] (II) Initializing built-in extension XInputExtension
[ 51.220] (II) Initializing built-in extension XTEST
[ 51.220] (II) Initializing built-in extension BIG-REQUESTS
[ 51.220] (II) Initializing built-in extension SYNC
[ 51.220] (II) Initializing built-in extension XKEYBOARD
[ 51.220] (II) Initializing built-in extension XC-MISC
[ 51.220] (II) Initializing built-in extension SECURITY
[ 51.220] (II) Initializing built-in extension XINERAMA
[ 51.220] (II) Initializing built-in extension XFIXES
[ 51.220] (II) Initializing built-in extension RENDER
[ 51.220] (II) Initializing built-in extension RANDR
[ 51.220] (II) Initializing built-in extension COMPOSITE
[ 51.220] (II) Initializing built-in extension DAMAGE
[ 51.220] (II) SELinux: Disabled on system
[ 51.240] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 51.240] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 51.240] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 51.240] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 51.241] (II) AIGLX: Loaded and initialized i965
[ 51.241] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 51.242] (II) intel(0): Setting screen physical size to 361 x 203
[ 51.390] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 51.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51.390] (II) LoadModule: "evdev"
[ 51.390] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 51.390] (II) Module evdev: vendor="X.Org Foundation"
[ 51.390] compiled for 1.12.1, module version = 2.7.0
[ 51.391] Module class: X.Org XInput Driver
[ 51.391] ABI class: X.Org XInput driver, version 16.0
[ 51.391] (II) Using input driver 'evdev' for 'Power Button'
[ 51.391] (**) Power Button: always reports core events
[ 51.391] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 51.391] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 51.391] (--) evdev: Power Button: Found keys
[ 51.391] (II) evdev: Power Button: Configuring as keyboard
[ 51.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 51.391] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 51.391] (**) Option "xkb_rules" "evdev"
[ 51.391] (**) Option "xkb_model" "pc104"
[ 51.391] (**) Option "xkb_layout" "us"
[ 51.391] (**) Option "xkb_options" "compose:caps"
[ 51.465] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 51.465] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 51.465] (II) Using input driver 'evdev' for 'Video Bus'
[ 51.465] (**) Video Bus: always reports core events
[ 51.465] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 51.465] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 51.465] (--) evdev: Video Bus: Found keys
[ 51.465] (II) evdev: Video Bus: Configuring as keyboard
[ 51.465] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[ 51.465] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 51.465] (**) Option "xkb_rules" "evdev"
[ 51.465] (**) Option "xkb_model" "pc104"
[ 51.465] (**) Option "xkb_layout" "us"
[ 51.465] (**) Option "xkb_options" "compose:caps"
[ 51.466] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 51.466] (II) No input driver specified, ignoring this device.
[ 51.466] (II) This device may have been added with another device file.
[ 51.467] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 51.467] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 51.467] (II) Using input driver 'evdev' for 'Sleep Button'
[ 51.467] (**) Sleep Button: always reports core events
[ 51.467] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 51.467] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 51.467] (--) evdev: Sleep Button: Found keys
[ 51.467] (II) evdev: Sleep Button: Configuring as keyboard
[ 51.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 51.467] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 51.467] (**) Option "xkb_rules" "evdev"
[ 51.467] (**) Option "xkb_model" "pc104"
[ 51.467] (**) Option "xkb_layout" "us"
[ 51.467] (**) Option "xkb_options" "compose:caps"
[ 51.470] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event10)
[ 51.470] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 51.470] (II) Using input driver 'evdev' for 'USB2.0 0.3M UVC WebCam'
[ 51.470] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 51.470] (**) evdev: USB2.0 0.3M UVC WebCam: Device: "/dev/input/event10"
[ 51.471] (--) evdev: USB2.0 0.3M UVC WebCam: Vendor 0x4f2 Product 0xb036
[ 51.471] (--) evdev: USB2.0 0.3M UVC WebCam: Found keys
[ 51.471] (II) evdev: USB2.0 0.3M UVC WebCam: Configuring as keyboard
[ 51.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input10/event10"
[ 51.471] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 9)
[ 51.471] (**) Option "xkb_rules" "evdev"
[ 51.471] (**) Option "xkb_model" "pc104"
[ 51.471] (**) Option "xkb_layout" "us"
[ 51.471] (**) Option "xkb_options" "compose:caps"
[ 51.474] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 51.474] (II) No input driver specified, ignoring this device.
[ 51.474] (II) This device may have been added with another device file.
[ 51.475] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 51.475] (II) No input driver specified, ignoring this device.
[ 51.475] (II) This device may have been added with another device file.
[ 51.475] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 51.475] (II) No input driver specified, ignoring this device.
[ 51.475] (II) This device may have been added with another device file.
[ 51.478] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 51.478] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 51.478] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 51.478] (**) Asus Laptop extra buttons: always reports core events
[ 51.478] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 51.478] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 51.478] (--) evdev: Asus Laptop extra buttons: Found keys
[ 51.478] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 51.478] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 51.478] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 51.478] (**) Option "xkb_rules" "evdev"
[ 51.478] (**) Option "xkb_model" "pc104"
[ 51.478] (**) Option "xkb_layout" "us"
[ 51.478] (**) Option "xkb_options" "compose:caps"
[ 51.479] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 51.479] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.480] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 51.480] (**) AT Translated Set 2 keyboard: always reports core events
[ 51.480] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 51.480] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 51.480] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 51.480] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 51.480] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 51.480] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 51.480] (**) Option "xkb_rules" "evdev"
[ 51.480] (**) Option "xkb_model" "pc104"
[ 51.480] (**) Option "xkb_layout" "us"
[ 51.480] (**) Option "xkb_options" "compose:caps"
[ 51.481] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 51.481] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 51.481] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 51.481] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 51.481] (II) LoadModule: "synaptics"
[ 51.481] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 51.482] (II) Module synaptics: vendor="X.Org Foundation"
[ 51.482] compiled for 1.12.4, module version = 1.6.2
[ 51.482] Module class: X.Org XInput Driver
[ 51.482] ABI class: X.Org XInput driver, version 16.0
[ 51.482] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 51.482] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 51.482] (**) Option "Device" "/dev/input/event9"
[ 51.512] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 51.512] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 51.512] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 51.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 51.524] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 51.524] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 51.524] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 51.524] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154
[ 51.524] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 51.524] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 51.524] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 51.524] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 51.525] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 51.525] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 51.525] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 51.526] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 51.526] (II) No input driver specified, ignoring this device.
[ 51.526] (II) This device may have been added with another device file.
[ 51.534] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[ 51.534] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 51.534] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 51.534] (**) ACPI Virtual Keyboard Device: always reports core events
[ 51.534] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[ 51.534] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 51.534] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 51.534] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 51.534] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 51.534] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[ 51.534] (**) Option "xkb_rules" "evdev"
[ 51.534] (**) Option "xkb_model" "pc104"
[ 51.534] (**) Option "xkb_layout" "us"
[ 51.534] (**) Option "xkb_options" "compose:caps"
[ 61.618] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 61.618] (II) intel(0): Printing DDC gathered Modelines:
[ 61.618] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 92.521] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 92.521] (II) intel(0): Printing DDC gathered Modelines:
[ 92.521] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 95.432] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 95.432] (II) intel(0): Printing DDC gathered Modelines:
[ 95.432] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 99.968] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 99.968] (II) intel(0): Printing DDC gathered Modelines:
[ 99.969] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 100.192] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 100.192] (II) intel(0): Printing DDC gathered Modelines:
[ 100.192] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 100.676] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 100.676] (II) intel(0): Printing DDC gathered Modelines:
[ 100.676] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 101.780] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 101.781] (II) intel(0): Printing DDC gathered Modelines:
[ 101.781] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 102.525] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 102.525] (II) intel(0): Printing DDC gathered Modelines:
[ 102.525] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 103.272] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 103.272] (II) intel(0): Printing DDC gathered Modelines:
[ 103.272] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 105.752] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 105.752] (II) intel(0): Printing DDC gathered Modelines:
[ 105.753] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 129.648] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 129.648] (II) intel(0): Printing DDC gathered Modelines:
[ 129.648] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 130.403] (II) intel(0): Allocated new frame buffer 1920x1848 stride 7680, tiled
[ 130.522] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 130.522] (II) intel(0): Printing DDC gathered Modelines:
[ 130.522] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 131.339] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 131.339] (II) intel(0): Printing DDC gathered Modelines:
[ 131.339] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 131.520] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 131.521] (II) intel(0): Printing DDC gathered Modelines:
[ 131.521] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 131.696] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 131.696] (II) intel(0): Printing DDC gathered Modelines:
[ 131.696] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 132.024] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 132.025] (II) intel(0): Printing DDC gathered Modelines:
[ 132.025] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 132.305] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 132.306] (II) intel(0): Printing DDC gathered Modelines:
[ 132.306] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 132.488] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 132.488] (II) intel(0): Printing DDC gathered Modelines:
[ 132.488] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 132.770] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 132.770] (II) intel(0): Printing DDC gathered Modelines:
[ 132.770] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 132.957] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 132.957] (II) intel(0): Printing DDC gathered Modelines:
[ 132.957] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 133.147] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 133.147] (II) intel(0): Printing DDC gathered Modelines:
[ 133.147] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 133.331] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 133.331] (II) intel(0): Printing DDC gathered Modelines:
[ 133.331] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 601.629] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 601.629] (II) intel(0): Printing DDC gathered Modelines:
[ 601.629] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 602.386] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 602.386] (II) intel(0): Printing DDC gathered Modelines:
[ 602.386] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 603.150] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 603.150] (II) intel(0): Printing DDC gathered Modelines:
[ 603.150] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 603.914] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 603.914] (II) intel(0): Printing DDC gathered Modelines:
[ 603.914] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 48.718]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 48.718] X Protocol Version 11, Revision 0
[ 48.718] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[ 48.718] Current Operating System: Linux Heisenberg 3.8-trunk-amd64 #1 SMP Debian 3.8.3-1~experimental.1 x86_64
[ 48.718] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/Heisenberg-root ro quiet
[ 48.718] Build Date: 23 February 2013 02:40:45PM
[ 48.718] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>)
[ 48.718] Current version of pixman: 0.26.0
[ 48.718] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 48.718] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 48.718] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 20:46:48 2013
[ 48.737] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 48.737] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 48.737] (==) No Layout section. Using the first Screen section.
[ 48.737] (==) No screen section available. Using defaults.
[ 48.737] (**) |-->Screen "Default Screen Section" (0)
[ 48.737] (**) | |-->Monitor "<default monitor>"
[ 48.737] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 48.737] (==) Automatically adding devices
[ 48.737] (==) Automatically enabling devices
[ 48.738] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 48.738] Entry deleted from font path.
[ 48.738] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 48.738] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 48.738] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 48.738] (II) Loader magic: 0x7f53dc1c8ae0
[ 48.738] (II) Module ABI versions:
[ 48.738] X.Org ANSI C Emulation: 0.4
[ 48.738] X.Org Video Driver: 12.1
[ 48.738] X.Org XInput driver : 16.0
[ 48.738] X.Org Server Extension : 6.0
[ 48.739] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 7, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 48.739] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 7, Mem @ 0xfe800000/1048576
[ 48.739] (II) Open ACPI successful (/var/run/acpid.socket)
[ 48.739] (II) LoadModule: "extmod"
[ 48.763] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 48.764] (II) Module extmod: vendor="X.Org Foundation"
[ 48.764] compiled for 1.12.4, module version = 1.0.0
[ 48.764] Module class: X.Org Server Extension
[ 48.764] ABI class: X.Org Server Extension, version 6.0
[ 48.764] (II) Loading extension SELinux
[ 48.764] (II) Loading extension MIT-SCREEN-SAVER
[ 48.764] (II) Loading extension XFree86-VidModeExtension
[ 48.764] (II) Loading extension XFree86-DGA
[ 48.764] (II) Loading extension DPMS
[ 48.764] (II) Loading extension XVideo
[ 48.764] (II) Loading extension XVideo-MotionCompensation
[ 48.764] (II) Loading extension X-Resource
[ 48.764] (II) LoadModule: "dbe"
[ 48.764] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 48.764] (II) Module dbe: vendor="X.Org Foundation"
[ 48.764] compiled for 1.12.4, module version = 1.0.0
[ 48.764] Module class: X.Org Server Extension
[ 48.764] ABI class: X.Org Server Extension, version 6.0
[ 48.764] (II) Loading extension DOUBLE-BUFFER
[ 48.764] (II) LoadModule: "glx"
[ 48.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 48.765] (II) Module glx: vendor="X.Org Foundation"
[ 48.765] compiled for 1.12.4, module version = 1.0.0
[ 48.765] ABI class: X.Org Server Extension, version 6.0
[ 48.765] (==) AIGLX enabled
[ 48.765] (II) Loading extension GLX
[ 48.765] (II) LoadModule: "record"
[ 48.765] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 48.765] (II) Module record: vendor="X.Org Foundation"
[ 48.766] compiled for 1.12.4, module version = 1.13.0
[ 48.766] Module class: X.Org Server Extension
[ 48.766] ABI class: X.Org Server Extension, version 6.0
[ 48.766] (II) Loading extension RECORD
[ 48.766] (II) LoadModule: "dri"
[ 48.766] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 48.787] (II) Module dri: vendor="X.Org Foundation"
[ 48.787] compiled for 1.12.4, module version = 1.0.0
[ 48.787] ABI class: X.Org Server Extension, version 6.0
[ 48.787] (II) Loading extension XFree86-DRI
[ 48.787] (II) LoadModule: "dri2"
[ 48.788] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 48.788] (II) Module dri2: vendor="X.Org Foundation"
[ 48.788] compiled for 1.12.4, module version = 1.2.0
[ 48.788] ABI class: X.Org Server Extension, version 6.0
[ 48.788] (II) Loading extension DRI2
[ 48.788] (==) Matched intel as autoconfigured driver 0
[ 48.788] (==) Matched vesa as autoconfigured driver 1
[ 48.788] (==) Matched fbdev as autoconfigured driver 2
[ 48.788] (==) Assigned the driver to the xf86ConfigLayout
[ 48.788] (II) LoadModule: "intel"
[ 48.788] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 48.789] (II) Module intel: vendor="X.Org Foundation"
[ 48.789] compiled for 1.12.4, module version = 2.20.14
[ 48.789] Module class: X.Org Video Driver
[ 48.789] ABI class: X.Org Video Driver, version 12.1
[ 48.789] (II) LoadModule: "vesa"
[ 48.789] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 48.789] (II) Module vesa: vendor="X.Org Foundation"
[ 48.789] compiled for 1.12.1, module version = 2.3.1
[ 48.789] Module class: X.Org Video Driver
[ 48.789] ABI class: X.Org Video Driver, version 12.0
[ 48.789] (II) LoadModule: "fbdev"
[ 48.790] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 48.790] (II) Module fbdev: vendor="X.Org Foundation"
[ 48.790] compiled for 1.12.1, module version = 0.4.2
[ 48.790] ABI class: X.Org Video Driver, version 12.0
[ 48.790] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 48.791] (II) VESA: driver for VESA chipsets: vesa
[ 48.791] (II) FBDEV: driver for framebuffer: fbdev
[ 48.791] (++) using VT number 7
[ 48.806] drmOpenDevice: node name is /dev/dri/card0
[ 48.806] drmOpenDevice: open result is 8, (OK)
[ 48.806] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 48.806] drmOpenDevice: node name is /dev/dri/card0
[ 48.807] drmOpenDevice: open result is 8, (OK)
[ 48.807] drmOpenByBusid: drmOpenMinor returns 8
[ 48.807] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 48.807] (WW) Falling back to old probe method for vesa
[ 48.807] (WW) Falling back to old probe method for fbdev
[ 48.807] (II) Loading sub module "fbdevhw"
[ 48.807] (II) LoadModule: "fbdevhw"
[ 48.807] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 48.807] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 48.807] compiled for 1.12.4, module version = 0.0.2
[ 48.807] ABI class: X.Org Video Driver, version 12.1
[ 48.807] drmOpenDevice: node name is /dev/dri/card0
[ 48.807] drmOpenDevice: open result is 9, (OK)
[ 48.807] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 48.807] drmOpenDevice: node name is /dev/dri/card0
[ 48.807] drmOpenDevice: open result is 9, (OK)
[ 48.807] drmOpenByBusid: drmOpenMinor returns 9
[ 48.807] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 48.807] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 48.807] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 48.807] (==) intel(0): RGB weight 888
[ 48.807] (==) intel(0): Default visual is TrueColor
[ 48.807] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 48.808] (**) intel(0): Relaxed fencing enabled
[ 48.808] (**) intel(0): Wait on SwapBuffers? enabled
[ 48.808] (**) intel(0): Triple buffering? enabled
[ 48.808] (**) intel(0): Framebuffer tiled
[ 48.808] (**) intel(0): Pixmaps tiled
[ 48.808] (**) intel(0): 3D buffers tiled
[ 48.808] (**) intel(0): SwapBuffers wait enabled
[ 48.808] (==) intel(0): video overlay key set to 0x101fe
[ 48.808] (II) intel(0): Output LVDS1 has no monitor section
[ 48.808] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 48.852] (II) intel(0): Output VGA1 has no monitor section
[ 48.852] (II) intel(0): Output HDMI1 has no monitor section
[ 48.852] (II) intel(0): Output DP1 has no monitor section
[ 48.852] (II) intel(0): Output DP2 has no monitor section
[ 48.852] (II) intel(0): EDID for output LVDS1
[ 48.852] (II) intel(0): Manufacturer: AUO Model: 102c Serial#: 0
[ 48.852] (II) intel(0): Year: 2008 Week: 1
[ 48.852] (II) intel(0): EDID Version: 1.3
[ 48.852] (II) intel(0): Digital Display Input
[ 48.852] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 48.852] (II) intel(0): Gamma: 2.20
[ 48.852] (II) intel(0): No DPMS capabilities specified
[ 48.852] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 48.852] (II) intel(0): First detailed timing is preferred mode
[ 48.852] (II) intel(0): redX: 0.607 redY: 0.351 greenX: 0.330 greenY: 0.619
[ 48.852] (II) intel(0): blueX: 0.149 blueY: 0.104 whiteX: 0.302 whiteY: 0.321
[ 48.852] (II) intel(0): Manufacturer's mask: 0
[ 48.852] (II) intel(0): Supported detailed timing:
[ 48.852] (II) intel(0): clock: 72.0 MHz Image Size: 293 x 164 mm
[ 48.852] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0
[ 48.852] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 48.852] (II) intel(0): Unknown vendor-specific block f
[ 48.852] (II) intel(0): AUO
[ 48.852] (II) intel(0): B133XW01 V0
[ 48.852] (II) intel(0): EDID (in hex):
[ 48.853] (II) intel(0): 00ffffffffffff0006af2c1000000000
[ 48.853] (II) intel(0): 01120103801d10780aba659b59549e26
[ 48.853] (II) intel(0): 1a4d5200000001010101010101010101
[ 48.853] (II) intel(0): 010101010101201c5680500023303020
[ 48.853] (II) intel(0): 360025a4100000180000000f00000000
[ 48.853] (II) intel(0): 00000000000000000020000000fe0041
[ 48.853] (II) intel(0): 554f0a202020202020202020000000fe
[ 48.853] (II) intel(0): 004231333358573031205630200a00bc
[ 48.853] (II) intel(0): EDID vendor "AUO", prod id 4140
[ 48.853] (II) intel(0): Printing DDC gathered Modelines:
[ 48.853] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 48.853] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 48.853] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 48.853] (II) intel(0): Printing probed modes for output LVDS1
[ 48.853] (II) intel(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz eP)
[ 48.853] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 48.853] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 48.853] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 48.853] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 48.853] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 48.853] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 48.908] (II) intel(0): EDID for output VGA1
[ 48.908] (II) intel(0): Printing probed modes for output VGA1
[ 48.908] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 48.908] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 48.908] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 48.908] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 48.908] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 48.908] (II) intel(0): EDID for output HDMI1
[ 48.908] (II) intel(0): EDID for output DP1
[ 48.908] (II) intel(0): EDID for output DP2
[ 48.908] (II) intel(0): Output LVDS1 connected
[ 48.908] (II) intel(0): Output VGA1 connected
[ 48.908] (II) intel(0): Output HDMI1 disconnected
[ 48.908] (II) intel(0): Output DP1 disconnected
[ 48.908] (II) intel(0): Output DP2 disconnected
[ 48.908] (II) intel(0): Using fuzzy aspect match for initial modes
[ 48.908] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 48.908] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 48.908] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 48.908] (II) intel(0): Kernel page flipping support detected, enabling
[ 48.908] (**) intel(0): Display dimensions: (290, 160) mm
[ 48.908] (**) intel(0): DPI set to (89, 121)
[ 48.908] (II) Loading sub module "fb"
[ 48.908] (II) LoadModule: "fb"
[ 48.909] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 48.909] (II) Module fb: vendor="X.Org Foundation"
[ 48.909] compiled for 1.12.4, module version = 1.0.0
[ 48.909] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.909] (II) Loading sub module "dri2"
[ 48.909] (II) LoadModule: "dri2"
[ 48.909] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 48.910] (II) Module dri2: vendor="X.Org Foundation"
[ 48.910] compiled for 1.12.4, module version = 1.2.0
[ 48.910] ABI class: X.Org Server Extension, version 6.0
[ 48.910] (II) UnloadModule: "vesa"
[ 48.910] (II) Unloading vesa
[ 48.910] (II) UnloadModule: "fbdev"
[ 48.910] (II) Unloading fbdev
[ 48.910] (II) UnloadSubModule: "fbdevhw"
[ 48.910] (II) Unloading fbdevhw
[ 48.910] (==) Depth 24 pixmap format is 32 bpp
[ 48.910] (II) intel(0): [DRI2] Setup complete
[ 48.910] (II) intel(0): [DRI2] DRI driver: i965
[ 48.910] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 48.937] (II) UXA(0): Driver registered support for the following operations:
[ 48.937] (II) solid
[ 48.938] (II) copy
[ 48.938] (II) composite (RENDER acceleration)
[ 48.938] (II) put_image
[ 48.938] (II) get_image
[ 48.938] (==) intel(0): Backing store disabled
[ 48.938] (==) intel(0): Silken mouse enabled
[ 48.938] (II) intel(0): Initializing HW Cursor
[ 48.938] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 48.943] (==) intel(0): DPMS enabled
[ 48.943] (==) intel(0): Intel XvMC decoder enabled
[ 48.943] (II) intel(0): Set up textured video
[ 48.943] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 48.943] (II) intel(0): direct rendering: DRI2 Enabled
[ 48.943] (==) intel(0): hotplug detection: "enabled"
[ 49.692] (--) RandR disabled
[ 49.692] (II) Initializing built-in extension Generic Event Extension
[ 49.692] (II) Initializing built-in extension SHAPE
[ 49.692] (II) Initializing built-in extension MIT-SHM
[ 49.692] (II) Initializing built-in extension XInputExtension
[ 49.692] (II) Initializing built-in extension XTEST
[ 49.692] (II) Initializing built-in extension BIG-REQUESTS
[ 49.692] (II) Initializing built-in extension SYNC
[ 49.692] (II) Initializing built-in extension XKEYBOARD
[ 49.692] (II) Initializing built-in extension XC-MISC
[ 49.692] (II) Initializing built-in extension SECURITY
[ 49.692] (II) Initializing built-in extension XINERAMA
[ 49.692] (II) Initializing built-in extension XFIXES
[ 49.692] (II) Initializing built-in extension RENDER
[ 49.692] (II) Initializing built-in extension RANDR
[ 49.692] (II) Initializing built-in extension COMPOSITE
[ 49.692] (II) Initializing built-in extension DAMAGE
[ 49.693] (II) SELinux: Disabled on system
[ 49.710] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 49.710] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 49.710] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 49.710] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 49.710] (II) AIGLX: Loaded and initialized i965
[ 49.710] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 49.711] (II) intel(0): Setting screen physical size to 270 x 203
[ 49.804] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 49.804] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 49.804] (II) LoadModule: "evdev"
[ 49.805] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 49.805] (II) Module evdev: vendor="X.Org Foundation"
[ 49.805] compiled for 1.12.1, module version = 2.7.0
[ 49.805] Module class: X.Org XInput Driver
[ 49.805] ABI class: X.Org XInput driver, version 16.0
[ 49.805] (II) Using input driver 'evdev' for 'Power Button'
[ 49.805] (**) Power Button: always reports core events
[ 49.805] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 49.805] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 49.805] (--) evdev: Power Button: Found keys
[ 49.805] (II) evdev: Power Button: Configuring as keyboard
[ 49.805] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 49.805] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 49.805] (**) Option "xkb_rules" "evdev"
[ 49.805] (**) Option "xkb_model" "pc104"
[ 49.805] (**) Option "xkb_layout" "us"
[ 49.805] (**) Option "xkb_options" "compose:caps"
[ 49.844] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 49.844] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 49.844] (II) Using input driver 'evdev' for 'Video Bus'
[ 49.845] (**) Video Bus: always reports core events
[ 49.845] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 49.845] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 49.845] (--) evdev: Video Bus: Found keys
[ 49.845] (II) evdev: Video Bus: Configuring as keyboard
[ 49.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[ 49.845] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 49.845] (**) Option "xkb_rules" "evdev"
[ 49.845] (**) Option "xkb_model" "pc104"
[ 49.845] (**) Option "xkb_layout" "us"
[ 49.845] (**) Option "xkb_options" "compose:caps"
[ 49.846] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 49.846] (II) No input driver specified, ignoring this device.
[ 49.846] (II) This device may have been added with another device file.
[ 49.846] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 49.846] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 49.846] (II) Using input driver 'evdev' for 'Sleep Button'
[ 49.846] (**) Sleep Button: always reports core events
[ 49.846] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 49.846] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 49.846] (--) evdev: Sleep Button: Found keys
[ 49.846] (II) evdev: Sleep Button: Configuring as keyboard
[ 49.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 49.846] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 49.846] (**) Option "xkb_rules" "evdev"
[ 49.846] (**) Option "xkb_model" "pc104"
[ 49.846] (**) Option "xkb_layout" "us"
[ 49.846] (**) Option "xkb_options" "compose:caps"
[ 49.847] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event6)
[ 49.847] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 49.847] (II) Using input driver 'evdev' for 'USB2.0 0.3M UVC WebCam'
[ 49.847] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 49.847] (**) evdev: USB2.0 0.3M UVC WebCam: Device: "/dev/input/event6"
[ 49.847] (--) evdev: USB2.0 0.3M UVC WebCam: Vendor 0x4f2 Product 0xb036
[ 49.847] (--) evdev: USB2.0 0.3M UVC WebCam: Found keys
[ 49.847] (II) evdev: USB2.0 0.3M UVC WebCam: Configuring as keyboard
[ 49.847] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6/event6"
[ 49.847] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 9)
[ 49.847] (**) Option "xkb_rules" "evdev"
[ 49.847] (**) Option "xkb_model" "pc104"
[ 49.848] (**) Option "xkb_layout" "us"
[ 49.848] (**) Option "xkb_options" "compose:caps"
[ 49.848] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 49.848] (II) No input driver specified, ignoring this device.
[ 49.848] (II) This device may have been added with another device file.
[ 49.849] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 49.849] (II) No input driver specified, ignoring this device.
[ 49.849] (II) This device may have been added with another device file.
[ 49.849] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event9)
[ 49.849] (II) No input driver specified, ignoring this device.
[ 49.849] (II) This device may have been added with another device file.
[ 49.850] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 49.850] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 49.850] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 49.850] (**) Asus Laptop extra buttons: always reports core events
[ 49.850] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 49.850] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 49.850] (--) evdev: Asus Laptop extra buttons: Found keys
[ 49.850] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 49.850] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 49.850] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 49.850] (**) Option "xkb_rules" "evdev"
[ 49.850] (**) Option "xkb_model" "pc104"
[ 49.850] (**) Option "xkb_layout" "us"
[ 49.850] (**) Option "xkb_options" "compose:caps"
[ 49.851] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 49.851] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 49.851] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 49.851] (**) AT Translated Set 2 keyboard: always reports core events
[ 49.851] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 49.851] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 49.851] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 49.851] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 49.851] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 49.851] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 49.851] (**) Option "xkb_rules" "evdev"
[ 49.851] (**) Option "xkb_model" "pc104"
[ 49.851] (**) Option "xkb_layout" "us"
[ 49.851] (**) Option "xkb_options" "compose:caps"
[ 49.852] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 49.852] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 49.852] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 49.852] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 49.852] (II) LoadModule: "synaptics"
[ 49.852] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 49.853] (II) Module synaptics: vendor="X.Org Foundation"
[ 49.853] compiled for 1.12.4, module version = 1.6.2
[ 49.853] Module class: X.Org XInput Driver
[ 49.853] ABI class: X.Org XInput driver, version 16.0
[ 49.853] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 49.853] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 49.853] (**) Option "Device" "/dev/input/event7"
[ 49.864] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 49.864] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 49.864] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 49.868] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 49.868] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 49.868] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 49.868] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 49.868] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154
[ 49.869] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 49.869] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 49.869] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 49.869] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 49.869] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 49.869] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 49.869] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 49.870] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 49.870] (II) No input driver specified, ignoring this device.
[ 49.870] (II) This device may have been added with another device file.
[ 49.872] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[ 49.872] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 49.872] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 49.872] (**) ACPI Virtual Keyboard Device: always reports core events
[ 49.872] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[ 49.872] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 49.872] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 49.872] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 49.872] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 49.872] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[ 49.872] (**) Option "xkb_rules" "evdev"
[ 49.872] (**) Option "xkb_model" "pc104"
[ 49.872] (**) Option "xkb_layout" "us"
[ 49.873] (**) Option "xkb_options" "compose:caps"
[ 95.032] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 97.157] (II) Open ACPI successful (/var/run/acpid.socket)
[ 97.157] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 97.937] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 133.916] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 327.568] (II) evdev: Power Button: Close
[ 327.568] (II) UnloadModule: "evdev"
[ 327.573] (II) evdev: Video Bus: Close
[ 327.573] (II) UnloadModule: "evdev"
[ 327.576] (II) evdev: Sleep Button: Close
[ 327.576] (II) UnloadModule: "evdev"
[ 327.580] (II) evdev: USB2.0 0.3M UVC WebCam: Close
[ 327.580] (II) UnloadModule: "evdev"
[ 327.580] (II) evdev: Asus Laptop extra buttons: Close
[ 327.580] (II) UnloadModule: "evdev"
[ 327.585] (II) evdev: AT Translated Set 2 keyboard: Close
[ 327.585] (II) UnloadModule: "evdev"
[ 327.588] (II) UnloadModule: "synaptics"
[ 327.588] (II) evdev: ACPI Virtual Keyboard Device: Close
[ 327.588] (II) UnloadModule: "evdev"
[ 328.340] Server terminated successfully (0). Closing log file.
--- End Message ---