--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-3.9-1-amd64: not correctly work Card Reader Broadcom NetXtreme BCM57765
- From: john <caster331@gmail.com>
- Date: Fri, 19 Jul 2013 15:31:44 +0400
- Message-id: <51E923A0.5080807@gmail.com>
Package: linux-image-3.9-1-amd64
Version:
Severity: normal
at system startup when the SD is already in the device,
it is displayed normally (once appeared desktop, SD too),
but if you take out the SD and put it back it will not work!
1. try commands:
# rmmod tg3
# modprobe tg3
2. commands work, but sometimes after a long time(not correctly)
3. please help with this illness, I am not an experienced user (1 month) but if I can contribute something than I will be glad. I apologize for my English
Please go to this link(here a more detailed description of the problem) http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715021
$ lspci -nn
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10)
04:00.1 SD Host controller [0805]: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader [14e4:16bc] (rev 10)
inserted three times and waited no less than two minutes. then
introduced the # rmmod tg3 and then again pulled out and inserted with
the expectation of at least two minutes, then entered # modprobe tg3!
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=UUID=5e846022-c899-4548-a402-d0b2f70368ec ro acpi_backlight=vendor quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6abefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer V5-171/Mimic , BIOS V1.09 10/30/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 14F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01859000, 0x01859fff] PGTABLE
[ 0.000000] BRK [0x0185a000, 0x0185afff] PGTABLE
[ 0.000000] BRK [0x0185b000, 0x0185bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
[ 0.000000] BRK [0x0185c000, 0x0185cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x0185d000, 0x0185dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6abefff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
[ 0.000000] [mem 0xa6a00000-0xa6abefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] [mem 0xa6fff000-0xa6ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3691c000-0x37485fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000a6ffe210 00094 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000a6ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 00000000a6fec000 0B903 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 00000000a6fbb000 00040
[ 0.000000] ACPI: UEFI 00000000a6ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 00000000a6ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 00000000a6ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 00000000a6ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 00000000a6ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 00000000a6feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 00000000a6fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 00000000a6fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 00000000a6fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fe0000 008A2 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: DMAR 00000000a6fde000 000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[ 0.000000] NODE_DATA [mem 0x14f5f7000-0x14f5fafff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa6abefff]
[ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
[ 0.000000] On node 0 totalpages: 1007195
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9271 pages used for memmap
[ 0.000000] DMA32 zone: 678079 pages, LIFO batch:31
[ 0.000000] Normal zone: 4445 pages used for memmap
[ 0.000000] Normal zone: 325120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a6abf000 - 00000000a6ebf000
[ 0.000000] PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000
[ 0.000000] PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000
[ 0.000000] PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000
[ 0.000000] PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014f200000 s84800 r8192 d21696 u262144
[ 0.000000] pcpu-alloc: s84800 r8192 d21696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 993402
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=UUID=5e846022-c899-4548-a402-d0b2f70368ec ro acpi_backlight=vendor quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3883860k/5494784k available (3646k kernel code, 1466004k absent, 144920k reserved, 3108k data, 880k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1696.223 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.44 BogoMIPS (lpj=6784892)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000052] AppArmor: AppArmor disabled by boot time parameter
[ 0.000053] Yama: becoming mindful.
[ 0.000408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001939] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002622] Mount-cache hash table entries: 256
[ 0.002853] Initializing cgroup subsys cpuacct
[ 0.002855] Initializing cgroup subsys memory
[ 0.002869] Initializing cgroup subsys devices
[ 0.002871] Initializing cgroup subsys freezer
[ 0.002873] Initializing cgroup subsys net_cls
[ 0.002875] Initializing cgroup subsys blkio
[ 0.002877] Initializing cgroup subsys perf_event
[ 0.002911] CPU: Physical Processor ID: 0
[ 0.002912] CPU: Processor Core ID: 0
[ 0.002918] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002918] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003474] mce: CPU supports 7 MCE banks
[ 0.003489] CPU0: Thermal monitoring enabled (TM1)
[ 0.003524] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.003524] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003524] tlb_flushall_shift: 1
[ 0.003670] Freeing SMP alternatives: 12k freed
[ 0.004187] ACPI: Core revision 20130117
[ 0.011772] ACPI: All ACPI Tables successfully acquired
[ 0.031227] dmar: Host address width 36
[ 0.031230] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.031239] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.031241] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.031247] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.031249] dmar: RMRR base: 0x000000a6e8f000 end: 0x000000a6eaefff
[ 0.031251] dmar: RMRR base: 0x000000a7800000 end: 0x000000af9fffff
[ 0.031324] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.031326] HPET id 0 under DRHD base 0xfed91000
[ 0.031544] Enabled IRQ remapping in x2apic mode
[ 0.031546] Enabling x2apic
[ 0.031547] Enabled x2apic
[ 0.031566] Switched APIC routing to cluster x2apic.
[ 0.032048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071754] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.071764] TSC deadline timer enabled
[ 0.071777] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.071785] ... version: 3
[ 0.071787] ... bit width: 48
[ 0.071788] ... generic registers: 4
[ 0.071790] ... value mask: 0000ffffffffffff
[ 0.071791] ... max period: 000000007fffffff
[ 0.071793] ... fixed-purpose events: 3
[ 0.071794] ... event mask: 000000070000000f
[ 0.085982] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072162] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.113578] Brought up 4 CPUs
[ 0.113583] smpboot: Total of 4 processors activated (13569.78 BogoMIPS)
[ 0.118109] devtmpfs: initialized
[ 0.122129] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[ 0.122301] regulator-dummy: no parameters
[ 0.122386] NET: Registered protocol family 16
[ 0.122547] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.122549] ACPI: bus type PCI registered
[ 0.122634] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.122638] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.142678] PCI: Using configuration type 1 for base access
[ 0.143566] bio: create slab <bio-0> at 0
[ 0.143670] ACPI: Added _OSI(Module Device)
[ 0.143673] ACPI: Added _OSI(Processor Device)
[ 0.143675] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143677] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145540] ACPI: EC: Look up EC in DSDT
[ 0.147462] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.151897] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.152435] ACPI: SSDT 00000000a6e18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.152928] ACPI: Dynamic OEM Table Load:
[ 0.152931] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.153303] ACPI: SSDT 00000000a6e19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.153853] ACPI: Dynamic OEM Table Load:
[ 0.153856] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.153995] ACPI: SSDT 00000000a6e17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.154473] ACPI: Dynamic OEM Table Load:
[ 0.154475] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.155473] ACPI: Interpreter enabled
[ 0.155483] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.155489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.155508] ACPI: (supports S0 S3 S4 S5)
[ 0.155510] ACPI: Using IOAPIC for interrupt routing
[ 0.155550] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.375450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.375642] \_SB_.PCI0:_OSC invalid UUID
[ 0.375645] _OSC request data:1 8 0
[ 0.376473] PCI host bridge to bus 0000:00
[ 0.376478] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.376482] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.376485] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.376488] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.376491] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.376502] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.376630] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.376645] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.376654] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.376660] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
[ 0.376817] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.376848] pci 0000:00:14.0: reg 10: [mem 0xc0600000-0xc060ffff 64bit]
[ 0.376942] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.376978] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.377032] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.377065] pci 0000:00:16.0: reg 10: [mem 0xc0614000-0xc061400f 64bit]
[ 0.377159] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.377283] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.377600] pci 0000:00:1a.0: reg 10: [mem 0xc0619000-0xc06193ff]
[ 0.379402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.379459] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.379515] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.379536] pci 0000:00:1b.0: reg 10: [mem 0xc0610000-0xc0613fff 64bit]
[ 0.379623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.379666] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.379713] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.379819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.379863] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.379910] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.380010] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.380055] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.380105] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.380210] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.380256] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.380318] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.380626] pci 0000:00:1d.0: reg 10: [mem 0xc0618000-0xc06183ff]
[ 0.382429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.382482] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.382534] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.382722] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.382749] pci 0000:00:1f.2: reg 10: [io 0x2088-0x208f]
[ 0.382760] pci 0000:00:1f.2: reg 14: [io 0x2094-0x2097]
[ 0.382771] pci 0000:00:1f.2: reg 18: [io 0x2080-0x2087]
[ 0.382782] pci 0000:00:1f.2: reg 1c: [io 0x2090-0x2093]
[ 0.382793] pci 0000:00:1f.2: reg 20: [io 0x2060-0x207f]
[ 0.382804] pci 0000:00:1f.2: reg 24: [mem 0xc0617000-0xc06177ff]
[ 0.382869] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.382960] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.382984] pci 0000:00:1f.3: reg 10: [mem 0xc0615000-0xc06150ff 64bit]
[ 0.383016] pci 0000:00:1f.3: reg 20: [io 0x2040-0x205f]
[ 0.383200] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.383313] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.383345] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc050ffff 64bit]
[ 0.383492] pci 0000:03:00.0: supports D1
[ 0.383494] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.383536] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.390276] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.390285] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.390445] pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.390483] pci 0000:04:00.0: reg 10: [mem 0xc0410000-0xc041ffff 64bit pref]
[ 0.390516] pci 0000:04:00.0: reg 18: [mem 0xc0420000-0xc042ffff 64bit pref]
[ 0.390572] pci 0000:04:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[ 0.390685] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.390741] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.390848] pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.390886] pci 0000:04:00.1: reg 10: [mem 0xc0400000-0xc040ffff 64bit pref]
[ 0.391079] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ 0.398373] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.398386] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.398499] \_SB_.PCI0:_OSC invalid UUID
[ 0.398500] _OSC request data:1 1f 0
[ 0.398506] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.398508] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.458777] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.458857] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.458933] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.459008] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459083] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.459159] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459233] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459308] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.459608] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.459617] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.459689] Found 1 acpi root devices
[ 0.459730] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.459915] ACPI: No dock devices found.
[ 0.459999] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.460003] vgaarb: loaded
[ 0.460004] vgaarb: bridge control possible 0000:00:02.0
[ 0.460054] PCI: Using ACPI for IRQ routing
[ 0.467707] PCI: pci_cache_line_size set to 64 bytes
[ 0.467854] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.467857] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.467859] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[ 0.467862] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 0.467864] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[ 0.468016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.468024] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.470037] Switching to clocksource hpet
[ 0.472278] pnp: PnP ACPI init
[ 0.472294] ACPI: bus type PNP registered
[ 0.472372] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.472485] pnp 00:01: Plug and Play ACPI device, IDs ETD0502 PNP0f13 (active)
[ 0.472559] pnp 00:02: [dma 4]
[ 0.472582] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.472612] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.472731] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.472769] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.472828] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.472831] system 00:06: [io 0xfd60-0xfd63] has been reserved
[ 0.472834] system 00:06: [io 0x1000-0x100f] has been reserved
[ 0.472837] system 00:06: [io 0xffff] has been reserved
[ 0.472841] system 00:06: [io 0xffff] has been reserved
[ 0.472844] system 00:06: [io 0x0400-0x0453] has been reserved
[ 0.472847] system 00:06: [io 0x0458-0x047f] has been reserved
[ 0.472850] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.472853] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.472857] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.472893] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.472959] system 00:08: [io 0x0454-0x0457] has been reserved
[ 0.472963] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.530306] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.530310] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.530313] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.530316] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.530320] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.530323] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530326] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.530329] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[ 0.530332] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.530336] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.530339] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.530342] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530699] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.530703] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.530706] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.530729] pnp: PnP ACPI: found 11 devices
[ 0.530730] ACPI: bus type PNP unregistered
[ 0.537725] pci 0000:04:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[ 0.537749] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.537754] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.537758] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.537784] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.537787] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.537790] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.537796] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafcfffff]
[ 0.537800] pci 0000:00:1c.0: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.537804] pci 0000:00:1c.2: BAR 14: assigned [mem 0xaff00000-0xafffffff]
[ 0.537808] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.537812] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.537817] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.537824] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafcfffff]
[ 0.537831] pci 0000:00:1c.0: bridge window [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.537839] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.537845] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.537858] pci 0000:04:00.0: BAR 6: assigned [mem 0xc0430000-0xc04307ff pref]
[ 0.537861] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.537868] pci 0000:00:1c.2: bridge window [mem 0xaff00000-0xafffffff]
[ 0.537873] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.538118] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.538121] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.538124] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.538127] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.538130] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.538133] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafcfffff]
[ 0.538135] pci_bus 0000:02: resource 2 [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.538138] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.538141] pci_bus 0000:04: resource 1 [mem 0xaff00000-0xafffffff]
[ 0.538144] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.538224] NET: Registered protocol family 2
[ 0.538503] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.538639] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.538724] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.538747] TCP: reno registered
[ 0.538758] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.538780] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.538885] NET: Registered protocol family 1
[ 0.538901] pci 0000:00:02.0: Boot video device
[ 0.570259] PCI: CLS 64 bytes, default 64
[ 0.570310] Unpacking initramfs...
[ 0.892554] Freeing initrd memory: 11688k freed
[ 0.894483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894490] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff8800a2abf000-ffff8800a6abefff]
[ 0.894541] Simple Boot Flag at 0x44 set to 0x1
[ 0.895013] audit: initializing netlink socket (disabled)
[ 0.895028] type=2000 audit(1373176644.880:1): initialized
[ 0.917489] bounce pool size: 64 pages
[ 0.917495] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.918005] VFS: Disk quotas dquot_6.5.2
[ 0.918036] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.918142] msgmni has been set to 7608
[ 0.918422] alg: No test for stdrng (krng)
[ 0.918456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.918501] io scheduler noop registered
[ 0.918504] io scheduler deadline registered
[ 0.918524] io scheduler cfq registered (default)
[ 0.918766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.918784] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.918786] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.919041] intel_idle: MWAIT substates: 0x21120
[ 0.919043] intel_idle: v0.4 model 0x3A
[ 0.919045] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.919095] GHES: HEST is not enabled!
[ 0.919158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.919817] Linux agpgart interface v0.103
[ 0.919957] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.937005] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.937014] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937138] mousedev: PS/2 mouse device common for all mice
[ 0.937349] rtc_cmos 00:07: RTC can wake from S4
[ 0.937491] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.937525] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.937658] cpuidle: using governor ladder
[ 0.937819] cpuidle: using governor menu
[ 0.937849] drop_monitor: Initializing network drop monitor service
[ 0.937948] TCP: cubic registered
[ 0.938029] NET: Registered protocol family 10
[ 0.938290] mip6: Mobile IPv6
[ 0.938295] NET: Registered protocol family 17
[ 0.938640] PM: Hibernation image not present or could not be loaded.
[ 0.938650] registered taskstats version 1
[ 0.939438] rtc_cmos 00:07: setting system clock to 2013-07-07 05:57:25 UTC (1373176645)
[ 0.940937] Freeing unused kernel memory: 880k freed
[ 0.941075] Write protecting the kernel read-only data: 6144k
[ 0.942867] Freeing unused kernel memory: 440k freed
[ 0.944790] Freeing unused kernel memory: 520k freed
[ 0.951022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.959221] udevd[67]: starting version 175
[ 0.977816] ACPI: bus type USB registered
[ 0.977866] usbcore: registered new interface driver usbfs
[ 0.977886] usbcore: registered new interface driver hub
[ 0.986784] pps_core: LinuxPPS API ver. 1 registered
[ 0.986790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.987087] PTP clock support registered
[ 0.990453] usbcore: registered new device driver usb
[ 0.991038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.991338] ehci-pci: EHCI PCI platform driver
[ 0.991518] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.991526] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.991538] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.991561] ehci-pci 0000:00:1a.0: debug port 2
[ 0.995493] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.000104] sdhci: Secure Digital Host Controller Interface driver
[ 1.000109] sdhci: Copyright(c) Pierre Ossman
[ 1.000489] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 1.000712] mmc0: no vqmmc regulator found
[ 1.000716] mmc0: no vmmc regulator found
[ 1.007837] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000
[ 1.008623] SCSI subsystem initialized
[ 1.013102] ACPI: bus type ATA registered
[ 1.014931] libata version 3.00 loaded.
[ 1.018374] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.018430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.018436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018440] usb usb1: Product: EHCI Host Controller
[ 1.018444] usb usb1: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 1.018447] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.018666] hub 1-0:1.0: USB hub found
[ 1.018676] hub 1-0:1.0: 2 ports detected
[ 1.018998] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.019006] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.019016] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.019040] ehci-pci 0000:00:1d.0: debug port 2
[ 1.022972] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.023241] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000
[ 1.034341] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.034393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.034398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.034403] usb usb2: Product: EHCI Host Controller
[ 1.034407] usb usb2: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 1.034410] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.034621] hub 2-0:1.0: USB hub found
[ 1.034633] hub 2-0:1.0: 2 ports detected
[ 1.034972] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.034981] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.034992] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.035116] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.035203] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.035291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.035297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.035301] usb usb3: Product: xHCI Host Controller
[ 1.035305] usb usb3: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
[ 1.035309] usb usb3: SerialNumber: 0000:00:14.0
[ 1.035602] xHCI xhci_add_endpoint called for root hub
[ 1.035605] xHCI xhci_check_bandwidth called for root hub
[ 1.035640] hub 3-0:1.0: USB hub found
[ 1.035651] hub 3-0:1.0: 4 ports detected
[ 1.036164] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.036173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.036211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.036216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.036220] usb usb4: Product: xHCI Host Controller
[ 1.036224] usb usb4: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
[ 1.036227] usb usb4: SerialNumber: 0000:00:14.0
[ 1.036548] xHCI xhci_add_endpoint called for root hub
[ 1.036551] xHCI xhci_check_bandwidth called for root hub
[ 1.036585] hub 4-0:1.0: USB hub found
[ 1.036595] hub 4-0:1.0: 4 ports detected
[ 1.042342] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[ 1.042411] tg3.c:v3.130 (February 14, 2013)
[ 1.048798] ahci 0000:00:1f.2: version 3.0
[ 1.048991] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.049036] ahci: SSS flag set, parallel bus scan disabled
[ 1.049063] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 1.049068] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.049075] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.051632] scsi0 : ahci
[ 1.051934] scsi1 : ahci
[ 1.052052] scsi2 : ahci
[ 1.052164] scsi3 : ahci
[ 1.052289] scsi4 : ahci
[ 1.052397] scsi5 : ahci
[ 1.052477] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 43
[ 1.052480] ata2: DUMMY
[ 1.052483] ata3: DUMMY
[ 1.052485] ata4: DUMMY
[ 1.052487] ata5: DUMMY
[ 1.052489] ata6: DUMMY
[ 1.071630] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0e:1b:12
[ 1.071635] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 1.071639] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.071642] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 1.330553] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.374575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.380055] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 1.380060] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.381468] ata1.00: configured for UDMA/133
[ 1.381766] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 1.387034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.387041] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.387180] sd 0:0:0:0: [sda] Write Protect is off
[ 1.387186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.387241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.456506] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.457765] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.459964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.462874] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.462879] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.463199] hub 1-1:1.0: USB hub found
[ 1.463352] hub 1-1:1.0: 6 ports detected
[ 1.574667] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.707253] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.707259] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.707509] hub 2-1:1.0: USB hub found
[ 1.707592] hub 2-1:1.0: 8 ports detected
[ 1.874816] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.893521] usb 3-4: New USB device found, idVendor=24ae, idProduct=2000
[ 1.893526] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.893530] usb 3-4: Product: RAPOO 2.4G Wireless Device
[ 1.893532] usb 3-4: Manufacturer: RAPOO
[ 1.893686] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.893698] usb 3-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.894763] tsc: Refined TSC clocksource calibration: 1696.146 MHz
[ 1.894770] Switching to clocksource tsc
[ 1.896746] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.900563] usbcore: registered new interface driver usbhid
[ 1.900567] usbhid: USB HID core driver
[ 1.902812] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input1
[ 1.902899] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4/input0
[ 1.903366] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input2
[ 1.904108] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4/input1
[ 1.963041] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.099955] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b336
[ 2.099961] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.099964] usb 1-1.3: Product: HD WebCam
[ 2.099967] usb 1-1.3: Manufacturer: HD WebCam
[ 2.305234] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.150639] udevd[400]: starting version 175
[ 5.599979] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 5.603516] ACPI: AC Adapter [ACAD] (off-line)
[ 5.615461] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 5.615520] ACPI: Power Button [PWRB]
[ 5.615590] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[ 5.615668] ACPI: Lid Switch [LID0]
[ 5.615726] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input5
[ 5.615776] ACPI: Sleep Button [SLPB]
[ 5.615841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.615887] ACPI: Power Button [PWRF]
[ 5.741589] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.741748] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 5.744195] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.744313] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 5.747163] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.747293] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 5.750478] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.750652] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.932894] wmi: Mapper loaded
[ 6.016105] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.044747] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 6.044756] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.097088] ACPI: Requesting acpi_cpufreq
[ 6.193793] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.193815] acer_wmi: Function bitmap for Communication Button: 0x1
[ 6.193943] acer_wmi: Disabling ACPI video driver
[ 6.197911] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 6.197919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197924] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 6.197929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197930] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 6.197935] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197937] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.203800] ACPI: Battery Slot [BAT1] (battery present)
[ 6.203841] input: Acer WMI hotkeys as /devices/virtual/input/input8
[ 6.204025] media: Linux media interface: v0.10
[ 6.204612] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[ 6.225580] iTCO_vendor_support: vendor-support=0
[ 6.226038] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.226074] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.226224] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.250514] [drm] Initialized drm 1.1.0 20060810
[ 6.309108] mei 0000:00:16.0: setting latency timer to 64
[ 6.309207] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 6.350444] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.465457] Linux video capture interface: v2.00
[ 6.521009] cfg80211: Calling CRDA to update world regulatory domain
[ 6.599843] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.640734] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
[ 6.867897] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f01)
[ 6.891076] psmouse serio1: elantech: Synaptics capabilities query result 0x01, 0x16, 0x0c.
[ 6.925868] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.005384] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 7.090435] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.103759] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.103851] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.104678] [drm] Memory usable by graphics device = 2048M
[ 7.104686] i915 0000:00:02.0: setting latency timer to 64
[ 7.120457] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 7.120466] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.120468] [drm] Driver supports precise vblank timestamp query.
[ 7.120527] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.142994] [drm] Wrong MCH_SSKPD value: 0x20100406
[ 7.142997] [drm] This can cause pipe underruns and display issues.
[ 7.142999] [drm] Please upgrade your BIOS to fix this.
[ 7.161160] fbcon: inteldrmfb (fb0) is primary device
[ 7.390422] ath: phy0: ASPM enabled: 0x42
[ 7.390423] ath: EEPROM regdomain: 0x6a
[ 7.390423] ath: EEPROM indicates we should expect a direct regpair map
[ 7.390425] ath: Country alpha2 being used: 00
[ 7.390425] ath: Regpair used: 0x6a
[ 7.409987] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
[ 7.414845] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 7.414924] usbcore: registered new interface driver uvcvideo
[ 7.414925] USB Video Class driver (1.1.1)
[ 7.550606] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.550798] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010800000, irq=17
[ 7.720651] cfg80211: World regulatory domain updated:
[ 7.720652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.720654] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.720655] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.720656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.720657] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.720658] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.937997] Console: switching to colour frame buffer device 170x48
[ 7.947823] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.947829] i915 0000:00:02.0: registered panic notifier
[ 7.948783] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.948836] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 7.948914] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.838306] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.120653] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 9.435236] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.660624] fuse init (API version 7.21)
[ 9.740253] loop: module loaded
[ 10.801486] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.901299] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.006436] RPC: Registered named UNIX socket transport module.
[ 12.006440] RPC: Registered udp transport module.
[ 12.006442] RPC: Registered tcp transport module.
[ 12.006443] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.045764] FS-Cache: Loaded
[ 12.058350] Key type dns_resolver registered
[ 12.090167] FS-Cache: Netfs 'nfs' registered for caching
[ 12.152936] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.302765] Bluetooth: Core ver 2.16
[ 15.302782] NET: Registered protocol family 31
[ 15.302784] Bluetooth: HCI device and connection manager initialized
[ 15.302791] Bluetooth: HCI socket layer initialized
[ 15.302793] Bluetooth: L2CAP socket layer initialized
[ 15.302797] Bluetooth: SCO socket layer initialized
[ 15.362030] Bluetooth: RFCOMM TTY layer initialized
[ 15.362044] Bluetooth: RFCOMM socket layer initialized
[ 15.362045] Bluetooth: RFCOMM ver 1.11
[ 15.433714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.433718] Bluetooth: BNEP filters: protocol multicast
[ 15.433728] Bluetooth: BNEP socket layer initialized
[ 16.532035] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.551657] tg3 0000:04:00.0: irq 47 for MSI/MSI-X
[ 16.551665] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 16.551674] tg3 0000:04:00.0: irq 49 for MSI/MSI-X
[ 16.551679] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 16.551684] tg3 0000:04:00.0: irq 51 for MSI/MSI-X
[ 17.117216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.807335] wlan1: authenticate with 1c:7e:e5:38:42:86
[ 18.829206] wlan1: send auth to 1c:7e:e5:38:42:86 (try 1/3)
[ 18.831068] wlan1: authenticated
[ 18.834637] wlan1: associate with 1c:7e:e5:38:42:86 (try 1/3)
[ 18.838875] wlan1: RX AssocResp from 1c:7e:e5:38:42:86 (capab=0x431 status=0 aid=1)
[ 18.838993] wlan1: associated
[ 18.839013] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1724.072490] mmc0: Timeout waiting for hardware interrupt.
[ 1734.093156] mmc0: Timeout waiting for hardware interrupt.
[ 1744.113746] mmc0: Timeout waiting for hardware interrupt.
[ 1754.134390] mmc0: Timeout waiting for hardware interrupt.
[ 1764.154969] mmc0: Timeout waiting for hardware interrupt.
[ 1774.175578] mmc0: Timeout waiting for hardware interrupt.
[ 1784.196204] mmc0: Timeout waiting for hardware interrupt.
[ 1792.925391] mmc0: Card removed during transfer!
[ 1792.925405] mmc0: Resetting controller.
[ 1804.077411] mmc0: Timeout waiting for hardware interrupt.
[ 1814.098004] mmc0: Timeout waiting for hardware interrupt.
[ 1824.118643] mmc0: Timeout waiting for hardware interrupt.
[ 1834.139240] mmc0: Timeout waiting for hardware interrupt.
[ 1844.159887] mmc0: Timeout waiting for hardware interrupt.
[ 1854.180486] mmc0: Timeout waiting for hardware interrupt.
[ 1864.201082] mmc0: Timeout waiting for hardware interrupt.
[ 1874.221729] mmc0: Timeout waiting for hardware interrupt.
[ 1879.272546] mmc0: Card removed during transfer!
[ 1879.272559] mmc0: Resetting controller.
[ 1890.197086] mmc0: Timeout waiting for hardware interrupt.
[ 1900.217662] mmc0: Timeout waiting for hardware interrupt.
[ 1910.238282] mmc0: Timeout waiting for hardware interrupt.
[ 1920.258924] mmc0: Timeout waiting for hardware interrupt.
[ 1930.279528] mmc0: Timeout waiting for hardware interrupt.
[ 1940.300186] mmc0: Timeout waiting for hardware interrupt.
[ 1948.123074] mmc0: new SDHC card at address e624
[ 1948.572553] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 1948.580857] mmcblk0: p1
[ 2183.112969] mmc0: card e624 removed
[ 2194.433323] mmc0: Timeout waiting for hardware interrupt.
[ 2204.453945] mmc0: Timeout waiting for hardware interrupt.
[ 2214.474518] mmc0: Timeout waiting for hardware interrupt.
[ 2224.495124] mmc0: Timeout waiting for hardware interrupt.
[ 2234.515757] mmc0: Timeout waiting for hardware interrupt.
[ 2244.536377] mmc0: Timeout waiting for hardware interrupt.
[ 2254.557035] mmc0: Timeout waiting for hardware interrupt.
[ 2264.577612] mmc0: Timeout waiting for hardware interrupt.
[ 2274.598253] mmc0: Timeout waiting for hardware interrupt.
[ 2284.618887] mmc0: Timeout waiting for hardware interrupt.
[ 2294.639509] mmc0: Timeout waiting for hardware interrupt.
[ 2304.692121] mmc0: Timeout waiting for hardware interrupt.
[ 2309.986077] mmc0: Card removed during transfer!
[ 2309.986090] mmc0: Resetting controller.
[ 2323.260656] mmc0: Timeout waiting for hardware interrupt.
[ 2333.281292] mmc0: Timeout waiting for hardware interrupt.
[ 2343.301901] mmc0: Timeout waiting for hardware interrupt.
[ 2353.322555] mmc0: Timeout waiting for hardware interrupt.
[ 2363.343174] mmc0: Timeout waiting for hardware interrupt.
[ 2373.363791] mmc0: Timeout waiting for hardware interrupt.
[ 2383.384383] mmc0: Timeout waiting for hardware interrupt.
[ 2393.405031] mmc0: Timeout waiting for hardware interrupt.
[ 2403.425642] mmc0: Timeout waiting for hardware interrupt.
[ 2413.446235] mmc0: Timeout waiting for hardware interrupt.
[ 2423.466835] mmc0: Timeout waiting for hardware interrupt.
[ 2433.519505] mmc0: Timeout waiting for hardware interrupt.
[ 2443.540135] mmc0: Timeout waiting for hardware interrupt.
[ 2453.560750] mmc0: Timeout waiting for hardware interrupt.
[ 2460.289869] mmc0: Card removed during transfer!
[ 2460.289881] mmc0: Resetting controller.
[ 2475.490863] mmc0: Timeout waiting for hardware interrupt.
[ 2485.511456] mmc0: Timeout waiting for hardware interrupt.
[ 2495.532068] mmc0: Timeout waiting for hardware interrupt.
[ 2505.552716] mmc0: Timeout waiting for hardware interrupt.
[ 2515.573284] mmc0: Timeout waiting for hardware interrupt.
[ 2525.593899] mmc0: Timeout waiting for hardware interrupt.
[ 2535.614568] mmc0: Timeout waiting for hardware interrupt.
[ 2545.635136] mmc0: Timeout waiting for hardware interrupt.
[ 2555.655809] mmc0: Timeout waiting for hardware interrupt.
[ 2565.676426] mmc0: Timeout waiting for hardware interrupt.
[ 2575.761067] mmc0: Timeout waiting for hardware interrupt.
[ 2585.781698] mmc0: Timeout waiting for hardware interrupt.
[ 2595.802284] mmc0: Timeout waiting for hardware interrupt.
[ 2605.822916] mmc0: Timeout waiting for hardware interrupt.
[ 2615.843535] mmc0: Timeout waiting for hardware interrupt.
[ 2625.864117] mmc0: Timeout waiting for hardware interrupt.
[ 2635.884787] mmc0: Timeout waiting for hardware interrupt.
[ 2636.578052] tg3.c:v3.130 (February 14, 2013)
[ 2636.614310] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0e:1b:12
[ 2636.614328] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2636.614339] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2636.614348] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 2636.631253] tg3 0000:04:00.0: irq 47 for MSI/MSI-X
[ 2636.631266] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 2636.631275] tg3 0000:04:00.0: irq 49 for MSI/MSI-X
[ 2636.631283] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 2636.631292] tg3 0000:04:00.0: irq 51 for MSI/MSI-X
[ 2636.710379] mmc0: new SDHC card at address e624
[ 2636.710764] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 2636.719029] mmcblk0: p1
[ 2637.199288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
--- End Message ---