--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: iguanair does not work after boot
- From: Peter Palfrader <weasel@debian.org>
- Date: Mon, 25 Mar 2013 13:55:16 +0100
- Message-id: <20130325125514.GA22791@valiant.palfrader.org>
Package: src:linux
Version: 3.2.39-2
Severity: normal
Hi,
you backported the iguanair IR driver to the debian kernel. Thanks a
lot for that!
There is a small problem however: After a boot, the driver does not
work. rmmod iguanair and modprobing it again makes it work.
This is part of the kernel log from a boot:
[ 13.984849] iguanair 6-2:1.0: failed to get version
[ 13.986799] iguanair: probe of 6-2:1.0 failed with error -110
[ 13.986830] usbcore: registered new interface driver iguanair
[full boot time dmesg attached]
An rmmod and modprobe later it works:
[46222.106123] usbcore: deregistering interface driver iguanair
[46223.564380] Registered IR keymap rc-rc6-mce
[46223.564533] input: IguanaWorks USB IR Transceiver version 0x0308 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/rc/rc0/input10
[46223.567161] rc0: IguanaWorks USB IR Transceiver version 0x0308 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/rc/rc0
[46223.567703] input: MCE IR Keyboard/Mouse (iguanair) as /devices/virtual/input/input11
[46223.567953] rc rc0: lirc_dev: driver ir-lirc-codec (iguanair) registered at minor = 0
[46223.567980] usbcore: registered new interface driver iguanair
It'd be nice if it worked immediately. :)
Cheers,
weasel
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg0-root ro console=tty0 console=ttyS0,115200n8 console=tty0 quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Z400 Workstation
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786G3 v03.54
board_vendor: Hewlett-Packard
board_name: 0B4Ch
board_version: D
** Loaded modules:
cdc_acm
rc_rc6_mce
iguanair
dummy
tcp_diag
inet_diag
fuse
tun
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
xfs
parport_pc
ppdev
lp
parport
8021q
garp
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
autofs4
binfmt_misc
ib_iser
rdma_cm
ib_addr
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
loop
firewire_sbp2
kvm_intel
kvm
snd_hda_codec_hdmi
snd_hda_codec_realtek
fglrx(P)
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_seq_midi
snd_pcm_oss
snd_seq_midi_event
snd_mixer_oss
ir_lirc_codec
snd_rawmidi
lirc_dev
snd_seq
snd_pcm
ir_mce_kbd_decoder
ir_sony_decoder
hp_wmi
ir_jvc_decoder
sparse_keymap
psmouse
ir_rc6_decoder
snd_page_alloc
rfkill
ir_rc5_decoder
snd_seq_device
coretemp
serio_raw
pcspkr
snd_timer
ir_nec_decoder
iTCO_wdt
rc_core
joydev
iTCO_vendor_support
evdev
snd
soundcore
i7core_edac
edac_core
wmi
acpi_cpufreq
mperf
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
sha256_generic
cryptd
aes_x86_64
aes_generic
cbc
hid_microsoft
hid_logitech_dj
usbhid
hid
dm_crypt
dm_mod
sg
sd_mod
sr_mod
cdrom
crc_t10dif
usb_storage
uhci_hcd
crc32c_intel
firewire_ohci
floppy
firewire_core
crc_itu_t
ahci
tg3
libahci
libphy
libata
scsi_mod
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4000000-f40fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at d040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f6004800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4300000-f44fffff
Prefetchable memory behind bridge: 00000000f4500000-00000000f46fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f5000000-f50fffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f42fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at d060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at d0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f6004c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=37, subordinate=37, sec-latency=32
Memory behind bridge: f7000000-f70fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA Controller [RAID mode] [8086:2822]
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 66
Region 0: I/O ports at d100 [size=8]
Region 1: I/O ports at d110 [size=4]
Region 2: I/O ports at d108 [size=8]
Region 3: I/O ports at d114 [size=4]
Region 4: I/O ports at d0c0 [size=32]
Region 5: Memory at f6004000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at f5000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0f:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6450] [1002:6779] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e206]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 70
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f4000000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
[virtual] Expansion ROM at f4040000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
0f:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98]
Subsystem: PC Partner Limited Sapphire HD 6450 1GB DDR3 [174b:aa98]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 68
Region 0: Memory at f4020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
37:05.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
3f:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0181 Realtek Semiconductor Corp.
Bus 002 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 006 Device 002: ID 1781:0938 Multiple Vendors Iguanaworks USB IR Transceiver
Bus 007 Device 002: ID 20df:0001 Simtec Electronics Entropy Key [UDEKEY01]
Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 007: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
-- System Information:
Debian Release: 7.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
ii firmware-bnx2 0.36+wheezy.1
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg0-root ro console=tty0 console=ttyS0,115200n8 console=tty0 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000defa5800 (usable)
[ 0.000000] BIOS-e820: 00000000defa5800 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000620000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x620000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 620000000 mask FE0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f9bf0] f9bf0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000defa5000
[ 0.000000] 0000000000 - 00dee00000 page 2M
[ 0.000000] 00dee00000 - 00defa5000 page 4k
[ 0.000000] kernel direct mapping tables up to defa5000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000620000000
[ 0.000000] 0100000000 - 0620000000 page 2M
[ 0.000000] kernel direct mapping tables up to 620000000 @ def8f000-defa5000
[ 0.000000] RAMDISK: 3689a000 - 37445000
[ 0.000000] ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000defb88e8 00064 (v01 HPQOEM SLIC-WKS 20111102 00000000)
[ 0.000000] ACPI: FACP 00000000defb8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: DSDT 00000000defb90a3 0A307 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000defb8800 00040
[ 0.000000] ACPI: APIC 00000000defb8b7c 00108 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000defb8c84 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000defb8ce7 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000defb8d23 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000defb8ecb 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: DMAR 00000000defb8f03 00170 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: SSDT 00000000defc4a99 02874 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000620000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000620000000
[ 0.000000] NODE_DATA [000000061fffb000 - 000000061fffffff]
[ 0.000000] [ffffea0000000000-ffffea00157fffff] PMD -> [ffff880607600000-ffff88061c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00620000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000defa5
[ 0.000000] 0: 0x00100000 -> 0x00620000
[ 0.000000] On node 0 totalpages: 6287146
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 894941 pages, LIFO batch:31
[ 0.000000] Normal zone: 73472 pages used for memmap
[ 0.000000] Normal zone: 5300480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000defa5000 - 00000000defa6000
[ 0.000000] PM: Registered nosave memory: 00000000defa6000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88061fc00000 s82944 r8192 d23552 u131072
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6199333
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg0-root ro console=tty0 console=ttyS0,115200n8 console=tty0 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24714060k/25690112k available (3420k kernel code, 541528k absent, 434524k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3199.614 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.22 BogoMIPS (lpj=12798456)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.001318] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010877] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014628] Mount-cache hash table entries: 256
[ 0.014718] Initializing cgroup subsys cpuacct
[ 0.014723] Initializing cgroup subsys memory
[ 0.014732] Initializing cgroup subsys devices
[ 0.014734] Initializing cgroup subsys freezer
[ 0.014735] Initializing cgroup subsys net_cls
[ 0.014737] Initializing cgroup subsys blkio
[ 0.014741] Initializing cgroup subsys perf_event
[ 0.014761] CPU: Physical Processor ID: 0
[ 0.014762] CPU: Processor Core ID: 0
[ 0.014765] mce: CPU supports 9 MCE banks
[ 0.014773] CPU0: Thermal monitoring enabled (TM1)
[ 0.014779] using mwait in idle threads.
[ 0.015052] ACPI: Core revision 20110623
[ 0.019713] DMAR: Host address width 39
[ 0.019715] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.019722] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
[ 0.019723] DMAR: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
[ 0.019725] DMAR: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
[ 0.019726] DMAR: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
[ 0.019727] DMAR: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
[ 0.019728] DMAR: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
[ 0.019730] DMAR: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
[ 0.019731] DMAR: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
[ 0.019732] DMAR: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
[ 0.019733] DMAR: ATSR flags: 0x0
[ 0.019911] Switched APIC routing to physical flat.
[ 0.020458] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060136] CPU0: Intel(R) Xeon(R) CPU W3565 @ 3.20GHz stepping 05
[ 0.164601] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.164607] ... version: 3
[ 0.164608] ... bit width: 48
[ 0.164608] ... generic registers: 4
[ 0.164609] ... value mask: 0000ffffffffffff
[ 0.164610] ... max period: 000000007fffffff
[ 0.164611] ... fixed-purpose events: 3
[ 0.164612] ... event mask: 000000070000000f
[ 0.164833] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164911] Booting Node 0, Processors #1
[ 0.164913] smpboot cpu 1: start_ip = 90000
[ 0.272738] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.272827] #2
[ 0.272828] smpboot cpu 2: start_ip = 90000
[ 0.380648] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.380732] #3
[ 0.380733] smpboot cpu 3: start_ip = 90000
[ 0.488653] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.488739] #4
[ 0.488740] smpboot cpu 4: start_ip = 90000
[ 0.596713] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.596804] #5
[ 0.596806] smpboot cpu 5: start_ip = 90000
[ 0.704628] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.704720] #6
[ 0.704721] smpboot cpu 6: start_ip = 90000
[ 0.812643] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.812730] #7
[ 0.812732] smpboot cpu 7: start_ip = 90000
[ 0.920653] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.920681] Brought up 8 CPUs
[ 0.920683] Total of 8 processors activated (51196.45 BogoMIPS).
[ 0.926679] devtmpfs: initialized
[ 0.930205] print_constraints: dummy:
[ 0.930254] NET: Registered protocol family 16
[ 0.930322] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.930324] ACPI: bus type pci registered
[ 0.930376] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.930378] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.933925] PCI: Using configuration type 1 for base access
[ 0.934797] bio: create slab <bio-0> at 0
[ 0.934879] ACPI: Added _OSI(Module Device)
[ 0.934881] ACPI: Added _OSI(Processor Device)
[ 0.934882] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.934884] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.936263] ACPI: EC: Look up EC in DSDT
[ 0.949688] ACPI: Interpreter enabled
[ 0.949691] ACPI: (supports S0 S3 S4 S5)
[ 0.949705] ACPI: Using IOAPIC for interrupt routing
[ 0.952909] ACPI: No dock devices found.
[ 0.952910] HEST: Table not found.
[ 0.952912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.968703] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.968707] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88060689b358), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.968712] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.968716] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.968988] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.968990] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xefffffff]
[ 0.968992] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.968994] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff]
[ 0.968995] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.968997] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.968998] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.969000] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.969001] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.969003] pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
[ 0.969004] pci_root PNP0A08:00: host bridge window [io 0x1000-0xefff]
[ 0.969007] pci_root PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af]; [io 0x0000-0x03af] ignored
[ 0.969020] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[ 0.969066] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.969087] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 0.969136] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.969156] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 0.969204] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.969226] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 0.969274] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.969295] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
[ 0.969351] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
[ 0.969400] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
[ 0.969456] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
[ 0.969506] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 0.969564] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 0.969620] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 0.969677] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
[ 0.969729] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.969766] pci 0000:00:1a.0: reg 20: [io 0xd000-0xd01f]
[ 0.969811] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.969848] pci 0000:00:1a.1: reg 20: [io 0xd020-0xd03f]
[ 0.969892] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.969929] pci 0000:00:1a.2: reg 20: [io 0xd040-0xd05f]
[ 0.969981] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.969999] pci 0000:00:1a.7: reg 10: [mem 0xf6004800-0xf6004bff]
[ 0.970079] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.970102] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.970115] pci 0000:00:1b.0: reg 10: [mem 0xf6000000-0xf6003fff 64bit]
[ 0.970173] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.970192] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.970251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.970275] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.970335] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.970358] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.970395] pci 0000:00:1d.0: reg 20: [io 0xd060-0xd07f]
[ 0.970440] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.970477] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
[ 0.970521] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.970558] pci 0000:00:1d.2: reg 20: [io 0xd0a0-0xd0bf]
[ 0.970611] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.970629] pci 0000:00:1d.7: reg 10: [mem 0xf6004c00-0xf6004fff]
[ 0.970709] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.970728] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.970782] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.970851] pci 0000:00:1f.0: no compatible bridge window for [io 0xf800-0xf87f]
[ 0.970855] pci 0000:00:1f.0: no compatible bridge window for [io 0xfa00-0xfa3f]
[ 0.970858] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.970861] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.970864] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.970907] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 0.970923] pci 0000:00:1f.2: reg 10: [io 0xd100-0xd107]
[ 0.970929] pci 0000:00:1f.2: reg 14: [io 0xd110-0xd113]
[ 0.970936] pci 0000:00:1f.2: reg 18: [io 0xd108-0xd10f]
[ 0.970942] pci 0000:00:1f.2: reg 1c: [io 0xd114-0xd117]
[ 0.970949] pci 0000:00:1f.2: reg 20: [io 0xd0c0-0xd0df]
[ 0.970955] pci 0000:00:1f.2: reg 24: [mem 0xf6004000-0xf60047ff]
[ 0.970995] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.971038] pci 0000:00:01.0: PCI bridge to [bus 03-03]
[ 0.971082] pci 0000:0f:00.0: [1002:6779] type 0 class 0x000300
[ 0.971096] pci 0000:0f:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.971106] pci 0000:0f:00.0: reg 18: [mem 0xf4000000-0xf401ffff 64bit]
[ 0.971113] pci 0000:0f:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.971126] pci 0000:0f:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.971158] pci 0000:0f:00.0: supports D1 D2
[ 0.971180] pci 0000:0f:00.1: [1002:aa98] type 0 class 0x000403
[ 0.971193] pci 0000:0f:00.1: reg 10: [mem 0xf4020000-0xf4023fff 64bit]
[ 0.971253] pci 0000:0f:00.1: supports D1 D2
[ 0.976578] pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
[ 0.976583] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.976588] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf40fffff]
[ 0.976594] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.976636] pci 0000:00:07.0: PCI bridge to [bus 28-28]
[ 0.976687] pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
[ 0.976752] pci 0000:01:00.0: [14e4:1684] type 0 class 0x000200
[ 0.976773] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf500ffff 64bit]
[ 0.976898] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.984583] pci 0000:00:1c.5: PCI bridge to [bus 01-01]
[ 0.984590] pci 0000:00:1c.5: bridge window [mem 0xf5000000-0xf50fffff]
[ 0.984638] pci 0000:37:05.0: [11c1:5811] type 0 class 0x000c00
[ 0.984657] pci 0000:37:05.0: reg 10: [mem 0xf7000000-0xf7000fff]
[ 0.984731] pci 0000:37:05.0: supports D1 D2
[ 0.984732] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.984767] pci 0000:00:1e.0: PCI bridge to [bus 37-37] (subtractive decode)
[ 0.984772] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.984777] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.984779] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
[ 0.984780] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff] (subtractive decode)
[ 0.984782] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
[ 0.984784] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.984786] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.984787] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.984789] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.984791] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
[ 0.984793] pci 0000:00:1e.0: bridge window [io 0x1000-0xefff] (subtractive decode)
[ 0.984813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.984945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH1._PRT]
[ 0.984984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH3._PRT]
[ 0.985023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH7._PRT]
[ 0.985063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.985101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
[ 0.985140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.985265] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.985268] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88060689b358), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.985276] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.985317] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.985320] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88060689b358), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.985326] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[ 0.985328] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.996801] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f])
[ 0.996847] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
[ 0.996862] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
[ 0.996877] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
[ 0.996890] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
[ 0.996904] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
[ 0.996916] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
[ 0.996930] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
[ 0.996944] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
[ 0.996956] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
[ 0.996969] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
[ 0.996982] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
[ 0.996996] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
[ 0.997008] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
[ 0.997021] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
[ 0.997034] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
[ 0.997048] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
[ 0.997060] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
[ 0.997073] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
[ 0.997086] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
[ 0.997107] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 0.997108] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.997110] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.997486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.997522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.997557] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.997591] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.997626] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.997661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.997695] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.997730] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.997809] vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.997816] vgaarb: loaded
[ 0.997817] vgaarb: bridge control possible 0000:0f:00.0
[ 0.997846] PCI: Using ACPI for IRQ routing
[ 0.999071] PCI: pci_cache_line_size set to 64 bytes
[ 0.999163] reserve RAM buffer: 0000000000095800 - 000000000009ffff
[ 0.999164] reserve RAM buffer: 00000000defa5800 - 00000000dfffffff
[ 0.999244] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.999248] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.999251] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.024735] Switching to clocksource hpet
[ 1.025983] pnp: PnP ACPI init
[ 1.025992] ACPI: bus type pnp registered
[ 1.026127] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.026129] pnp 00:00: [mem 0xe0000000-0xefffffff window]
[ 1.026130] pnp 00:00: [mem 0xf4000000-0xf7ffffff window]
[ 1.026132] pnp 00:00: [mem 0xfed00000-0xfed003ff window]
[ 1.026134] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.026135] pnp 00:00: [io 0x0000-0x03af window]
[ 1.026137] pnp 00:00: [io 0x0000-0x03af window]
[ 1.026138] pnp 00:00: [io 0x03b0-0x03df window]
[ 1.026139] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 1.026141] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.026142] pnp 00:00: [io 0x0d00-0x0fff window]
[ 1.026144] pnp 00:00: [io 0x1000-0xefff window]
[ 1.026145] pnp 00:00: [bus 00-3e]
[ 1.026175] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.026185] pnp 00:01: [io 0x00f0-0x00ff]
[ 1.026191] pnp 00:01: [irq 13]
[ 1.026211] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.026221] pnp 00:02: [io 0x0000-0x000f]
[ 1.026222] pnp 00:02: [io 0x0080-0x008f]
[ 1.026224] pnp 00:02: [io 0x00c0-0x00df]
[ 1.026225] pnp 00:02: [dma 4]
[ 1.026244] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.026250] pnp 00:03: [io 0x0070-0x0071]
[ 1.026254] pnp 00:03: [irq 8]
[ 1.026275] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.026281] pnp 00:04: [io 0x0061]
[ 1.026301] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.026311] pnp 00:05: [irq 12]
[ 1.026331] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 1.026338] pnp 00:06: [io 0x0060]
[ 1.026339] pnp 00:06: [io 0x0064]
[ 1.026343] pnp 00:06: [irq 1]
[ 1.026363] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.026490] pnp 00:07: [irq 4]
[ 1.026491] pnp 00:07: [io 0x03f8-0x03ff]
[ 1.026544] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 1.026675] pnp 00:08: [irq 6]
[ 1.026677] pnp 00:08: [dma 2]
[ 1.026678] pnp 00:08: [io 0x03f0-0x03f5]
[ 1.026680] pnp 00:08: [io 0x03f7]
[ 1.026711] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.026745] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 1.026768] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[ 1.026795] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 1.026817] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.026945] pnp 00:0b: [io 0x0010-0x001f]
[ 1.026947] pnp 00:0b: [io 0x0050-0x0053]
[ 1.026948] pnp 00:0b: [io 0x0072-0x0077]
[ 1.026950] pnp 00:0b: [io 0x0090-0x009f]
[ 1.026996] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.027004] pnp 00:0c: [io 0x0400-0x041f]
[ 1.027006] pnp 00:0c: [io 0x0420-0x043f]
[ 1.027007] pnp 00:0c: [io 0x0440-0x045f]
[ 1.027008] pnp 00:0c: [io 0x0460-0x047f]
[ 1.027010] pnp 00:0c: [io 0x0480-0x048f]
[ 1.027011] pnp 00:0c: [io 0xf800-0xf81f]
[ 1.027013] pnp 00:0c: [io 0xf820-0xf83f]
[ 1.027014] pnp 00:0c: [io 0xf840-0xf85f]
[ 1.027015] pnp 00:0c: [io 0xf860-0xf87f]
[ 1.027017] pnp 00:0c: [io 0xfa00-0xfa3f]
[ 1.027018] pnp 00:0c: [io 0xfc00-0xfc7f]
[ 1.027019] pnp 00:0c: [io 0xfc80-0xfcff]
[ 1.027021] pnp 00:0c: [io 0xfe00-0xfe7f]
[ 1.027022] pnp 00:0c: [io 0xfe80-0xfeff]
[ 1.027035] pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 1.027037] pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 1.027039] pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 1.027041] pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 1.027080] system 00:0c: [io 0x0400-0x041f] has been reserved
[ 1.027081] system 00:0c: [io 0x0420-0x043f] has been reserved
[ 1.027083] system 00:0c: [io 0x0440-0x045f] has been reserved
[ 1.027085] system 00:0c: [io 0x0460-0x047f] has been reserved
[ 1.027087] system 00:0c: [io 0x0480-0x048f] has been reserved
[ 1.027089] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
[ 1.027091] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
[ 1.027092] system 00:0c: [io 0xfc80-0xfcff] has been reserved
[ 1.027094] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
[ 1.027096] system 00:0c: [io 0xfe80-0xfeff] has been reserved
[ 1.027098] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.027115] pnp 00:0d: [io 0x004e-0x004f]
[ 1.027116] pnp 00:0d: [io 0x04d0-0x04d1]
[ 1.027117] pnp 00:0d: [io 0x4700-0x470b]
[ 1.027164] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 1.027166] system 00:0d: [io 0x4700-0x470b] has been reserved
[ 1.027167] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.027200] pnp 00:0e: [bus 3f]
[ 1.027226] pnp 00:0e: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.032964] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 1.032966] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 1.032968] pnp 00:0f: [mem 0x000e8000-0x000fffff]
[ 1.032969] pnp 00:0f: [mem 0xfec01000-0xfecfffff]
[ 1.032971] pnp 00:0f: [mem 0xfed00000-0xfed3ffff]
[ 1.032972] pnp 00:0f: [mem 0xfed40000-0xffffffff]
[ 1.032973] pnp 00:0f: [mem 0xf0000000-0xf3ffffff]
[ 1.032975] pnp 00:0f: [mem 0x000dc000-0x000e7fff]
[ 1.033035] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.033037] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.033039] system 00:0f: [mem 0x000e8000-0x000fffff] could not be reserved
[ 1.033041] system 00:0f: [mem 0xfec01000-0xfecfffff] could not be reserved
[ 1.033043] system 00:0f: [mem 0xfed00000-0xfed3ffff] could not be reserved
[ 1.033045] system 00:0f: [mem 0xfed40000-0xffffffff] could not be reserved
[ 1.033047] system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 1.033049] system 00:0f: [mem 0x000dc000-0x000e7fff] has been reserved
[ 1.033051] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.033059] pnp: PnP ACPI: found 16 devices
[ 1.033060] ACPI: ACPI bus type pnp unregistered
[ 1.039456] PCI: max bus depth: 1 pci_try_num: 2
[ 1.039494] pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
[ 1.039496] pci 0000:00:1f.0: BAR 14: [io 0xfa00-0xfa3f] has bogus alignment
[ 1.039500] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4100000-0xf42fffff 64bit pref]
[ 1.039502] pci 0000:00:1c.5: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.039504] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4300000-0xf44fffff]
[ 1.039507] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4500000-0xf46fffff 64bit pref]
[ 1.039509] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.039511] pci 0000:00:01.0: PCI bridge to [bus 03-03]
[ 1.039519] pci 0000:0f:00.0: BAR 6: assigned [mem 0xf4040000-0xf405ffff pref]
[ 1.039520] pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
[ 1.039522] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 1.039526] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf40fffff]
[ 1.039528] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.039532] pci 0000:00:07.0: PCI bridge to [bus 28-28]
[ 1.039539] pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
[ 1.039541] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.039545] pci 0000:00:1c.0: bridge window [mem 0xf4300000-0xf44fffff]
[ 1.039548] pci 0000:00:1c.0: bridge window [mem 0xf4500000-0xf46fffff 64bit pref]
[ 1.039552] pci 0000:00:1c.5: PCI bridge to [bus 01-01]
[ 1.039554] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 1.039558] pci 0000:00:1c.5: bridge window [mem 0xf5000000-0xf50fffff]
[ 1.039561] pci 0000:00:1c.5: bridge window [mem 0xf4100000-0xf42fffff 64bit pref]
[ 1.039566] pci 0000:00:1e.0: PCI bridge to [bus 37-37]
[ 1.039569] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xf70fffff]
[ 1.039580] pci 0000:00:01.0: setting latency timer to 64
[ 1.039584] pci 0000:00:03.0: setting latency timer to 64
[ 1.039589] pci 0000:00:07.0: setting latency timer to 64
[ 1.039594] pci 0000:00:1c.0: setting latency timer to 64
[ 1.039606] pci 0000:00:1c.5: setting latency timer to 64
[ 1.039611] pci 0000:00:1e.0: setting latency timer to 64
[ 1.039613] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 1.039615] pci_bus 0000:00: resource 5 [mem 0xe0000000-0xefffffff]
[ 1.039616] pci_bus 0000:00: resource 6 [mem 0xf4000000-0xf7ffffff]
[ 1.039618] pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
[ 1.039619] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.039620] pci_bus 0000:00: resource 9 [io 0x0000-0x03af]
[ 1.039622] pci_bus 0000:00: resource 10 [io 0x03b0-0x03df]
[ 1.039623] pci_bus 0000:00: resource 11 [io 0x03e0-0x0cf7]
[ 1.039624] pci_bus 0000:00: resource 12 [io 0x0d00-0x0fff]
[ 1.039626] pci_bus 0000:00: resource 13 [io 0x1000-0xefff]
[ 1.039627] pci_bus 0000:0f: resource 0 [io 0xe000-0xefff]
[ 1.039629] pci_bus 0000:0f: resource 1 [mem 0xf4000000-0xf40fffff]
[ 1.039630] pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.039632] pci_bus 0000:1c: resource 0 [io 0x2000-0x2fff]
[ 1.039633] pci_bus 0000:1c: resource 1 [mem 0xf4300000-0xf44fffff]
[ 1.039635] pci_bus 0000:1c: resource 2 [mem 0xf4500000-0xf46fffff 64bit pref]
[ 1.039636] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.039638] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf50fffff]
[ 1.039639] pci_bus 0000:01: resource 2 [mem 0xf4100000-0xf42fffff 64bit pref]
[ 1.039641] pci_bus 0000:37: resource 1 [mem 0xf7000000-0xf70fffff]
[ 1.039642] pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
[ 1.039644] pci_bus 0000:37: resource 5 [mem 0xe0000000-0xefffffff]
[ 1.039645] pci_bus 0000:37: resource 6 [mem 0xf4000000-0xf7ffffff]
[ 1.039646] pci_bus 0000:37: resource 7 [mem 0xfed00000-0xfed003ff]
[ 1.039648] pci_bus 0000:37: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.039649] pci_bus 0000:37: resource 9 [io 0x0000-0x03af]
[ 1.039651] pci_bus 0000:37: resource 10 [io 0x03b0-0x03df]
[ 1.039652] pci_bus 0000:37: resource 11 [io 0x03e0-0x0cf7]
[ 1.039653] pci_bus 0000:37: resource 12 [io 0x0d00-0x0fff]
[ 1.039655] pci_bus 0000:37: resource 13 [io 0x1000-0xefff]
[ 1.039734] NET: Registered protocol family 2
[ 1.039955] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.040847] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.041979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.042106] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.042107] TCP reno registered
[ 1.042134] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.042227] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.042415] NET: Registered protocol family 1
[ 1.042617] pci 0000:0f:00.0: Boot video device
[ 1.042645] PCI: CLS 64 bytes, default 64
[ 1.042681] Unpacking initramfs...
[ 1.216771] Freeing initrd memory: 11948k freed
[ 1.218337] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.218341] Placing 64MB software IO TLB between ffff8800daf8f000 - ffff8800def8f000
[ 1.218342] software IO TLB at phys 0xdaf8f000 - 0xdef8f000
[ 1.218920] audit: initializing netlink socket (disabled)
[ 1.218930] type=2000 audit(1364121104.000:1): initialized
[ 1.229381] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.231583] VFS: Disk quotas dquot_6.5.2
[ 1.231611] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.231670] msgmni has been set to 32768
[ 1.231784] alg: No test for stdrng (krng)
[ 1.231810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.231813] io scheduler noop registered
[ 1.231814] io scheduler deadline registered
[ 1.231838] io scheduler cfq registered (default)
[ 1.232015] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.232053] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 1.232102] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.232133] pcieport 0000:00:1c.5: irq 65 for MSI/MSI-X
[ 1.232196] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.232209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.232210] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.232439] intel_idle: MWAIT substates: 0x1120
[ 1.232448] intel_idle: v0.4 model 0x1A
[ 1.232450] intel_idle: lapic_timer_reliable_states 0x2
[ 1.232486] ERST: Table is not found!
[ 1.232487] GHES: HEST is not enabled!
[ 1.232525] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.252907] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.457217] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.476967] Linux agpgart interface v0.103
[ 1.477086] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.479979] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.479984] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.480069] mousedev: PS/2 mouse device common for all mice
[ 1.480104] rtc_cmos 00:03: RTC can wake from S4
[ 1.480189] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.480212] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.480318] cpuidle: using governor ladder
[ 1.480443] cpuidle: using governor menu
[ 1.480615] TCP cubic registered
[ 1.480864] NET: Registered protocol family 10
[ 1.482235] Mobile IPv6
[ 1.482237] NET: Registered protocol family 17
[ 1.482239] Registering the dns_resolver key type
[ 1.482601] PM: Hibernation image not present or could not be loaded.
[ 1.482618] registered taskstats version 1
[ 1.484194] rtc_cmos 00:03: setting system clock to 2013-03-24 10:31:44 UTC (1364121104)
[ 1.484219] Initializing network drop monitor service
[ 1.485795] Freeing unused kernel memory: 576k freed
[ 1.485861] Write protecting the kernel read-only data: 6144k
[ 1.488219] Freeing unused kernel memory: 660k freed
[ 1.490379] Freeing unused kernel memory: 680k freed
[ 1.540096] udevd[82]: starting version 175
[ 1.553358] usbcore: registered new interface driver usbfs
[ 1.553380] usbcore: registered new interface driver hub
[ 1.553595] usbcore: registered new device driver usb
[ 1.554074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.554118] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.554121] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.554147] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.554183] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.557216] SCSI subsystem initialized
[ 1.558071] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.558094] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf6004800
[ 1.559730] libata version 3.00 loaded.
[ 1.560324] tg3.c:v3.121 (November 2, 2011)
[ 1.560350] tg3 0000:01:00.0: setting latency timer to 64
[ 1.576908] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.576966] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.576971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.576975] usb usb1: Product: EHCI Host Controller
[ 1.576978] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.576982] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.577267] hub 1-0:1.0: USB hub found
[ 1.577270] hub 1-0:1.0: 6 ports detected
[ 1.577402] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.577405] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.577414] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.577439] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.577445] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.581323] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.581338] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf6004c00
[ 1.585705] FDC 0 is a post-1991 82077
[ 1.594537] tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 3c:d9:2b:60:91:0d
[ 1.594540] tg3 0000:01:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.594542] tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.594544] tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.600960] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.601001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.601005] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.601009] usb usb2: Product: EHCI Host Controller
[ 1.601011] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.601014] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.601150] hub 2-0:1.0: USB hub found
[ 1.601155] hub 2-0:1.0: 6 ports detected
[ 1.601243] ahci 0000:00:1f.2: version 3.0
[ 1.601314] ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
[ 1.601324] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.601383] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.601387] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
[ 1.601391] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.602090] scsi0 : ahci
[ 1.602544] scsi1 : ahci
[ 1.602631] scsi2 : ahci
[ 1.602717] scsi3 : ahci
[ 1.602809] scsi4 : ahci
[ 1.602898] scsi5 : ahci
[ 1.602943] ata1: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004100 irq 66
[ 1.602946] ata2: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004180 irq 66
[ 1.602949] ata3: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004200 irq 66
[ 1.602952] ata4: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004280 irq 66
[ 1.602954] ata5: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004300 irq 66
[ 1.602956] ata6: SATA max UDMA/133 abar m2048@0xf6004000 port 0xf6004380 irq 66
[ 1.603029] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.603036] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.603044] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.603067] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000d000
[ 1.603094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603098] usb usb3: Product: UHCI Host Controller
[ 1.603099] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.603100] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.603189] hub 3-0:1.0: USB hub found
[ 1.603194] hub 3-0:1.0: 2 ports detected
[ 1.603252] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.603255] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.603261] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.603288] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d020
[ 1.603310] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603313] usb usb4: Product: UHCI Host Controller
[ 1.603314] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.603315] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.603396] hub 4-0:1.0: USB hub found
[ 1.603400] hub 4-0:1.0: 2 ports detected
[ 1.603456] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.603459] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.603463] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.603484] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000d040
[ 1.603505] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603507] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603508] usb usb5: Product: UHCI Host Controller
[ 1.603509] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.603511] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.603590] hub 5-0:1.0: USB hub found
[ 1.603593] hub 5-0:1.0: 2 ports detected
[ 1.603650] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.603652] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.603657] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.603678] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d060
[ 1.603700] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603701] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603703] usb usb6: Product: UHCI Host Controller
[ 1.603704] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.603705] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.603792] hub 6-0:1.0: USB hub found
[ 1.603796] hub 6-0:1.0: 2 ports detected
[ 1.603852] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.603855] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.603859] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.603880] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000d080
[ 1.603902] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603903] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603905] usb usb7: Product: UHCI Host Controller
[ 1.603906] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.603907] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.603988] hub 7-0:1.0: USB hub found
[ 1.603992] hub 7-0:1.0: 2 ports detected
[ 1.604070] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.604073] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.604079] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.604104] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000d0a0
[ 1.604134] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.604136] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604138] usb usb8: Product: UHCI Host Controller
[ 1.604140] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.604142] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.604249] hub 8-0:1.0: USB hub found
[ 1.604253] hub 8-0:1.0: 2 ports detected
[ 1.621070] firewire_ohci: Added fw-ohci device 0000:37:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.892801] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.920902] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.924904] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.924970] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.039065] usb 1-4: New USB device found, idVendor=0bda, idProduct=0181
[ 2.039069] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.039072] usb 1-4: Product: USB2.0-CRW
[ 2.039075] usb 1-4: Manufacturer: Generic
[ 2.039077] usb 1-4: SerialNumber: 20060413092100000
[ 2.047540] Initializing USB Mass Storage driver...
[ 2.047837] scsi6 : usb-storage 1-4:1.0
[ 2.047922] usbcore: registered new interface driver usb-storage
[ 2.047925] USB Mass Storage support registered.
[ 2.092899] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.093250] ata3.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[ 2.093255] ata3.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.093603] ata3.00: configured for UDMA/133
[ 2.096936] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.099405] ata2.00: ATAPI: hp DVD A DH16ABLH, 3HD9, max UDMA/100
[ 2.100253] ata2.00: configured for UDMA/100
[ 2.100923] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.101933] ata1.00: ATA-8: Hitachi HDS721050CLA662, JP2OA41A, max UDMA/133
[ 2.101938] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.103038] ata1.00: configured for UDMA/133
[ 2.103363] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 2.105027] scsi 1:0:0:0: CD-ROM hp DVD A DH16ABLH 3HD9 PQ: 0 ANSI: 5
[ 2.105670] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[ 2.109097] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.109331] sd 0:0:0:0: [sda] Write Protect is off
[ 2.109333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.109399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.112844] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.112849] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.113049] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.113300] sd 2:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.113660] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.113664] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.113773] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.114766] sdb: sdb1 sdb2 sdb3
[ 2.115956] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.121133] firewire_core: created device fw0: GUID 0060b000007cefce, S400
[ 2.154421] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.154469] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.154575] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.156922] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.180937] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.182739] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.216862] Refined TSC clocksource calibration: 3200.002 MHz.
[ 2.216868] Switching to clocksource tsc
[ 2.289295] usb 2-1: New USB device found, idVendor=0424, idProduct=2504
[ 2.289300] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.289608] hub 2-1:1.0: USB hub found
[ 2.289832] hub 2-1:1.0: 4 ports detected
[ 2.568914] usb 2-4: new high-speed USB device number 5 using ehci_hcd
[ 2.709541] usb 2-4: New USB device found, idVendor=1a40, idProduct=0101
[ 2.709545] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.709549] usb 2-4: Product: USB 2.0 Hub [MTT]
[ 2.709946] hub 2-4:1.0: USB hub found
[ 2.710015] hub 2-4:1.0: 4 ports detected
[ 2.964826] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[ 3.048935] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 3.051957] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 3.054965] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 3.058110] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 3.061235] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS
[ 3.062250] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.062507] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 3.062938] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 3.063101] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 3.063270] sd 6:0:0:4: Attached scsi generic sg7 type 0
[ 3.117006] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.127097] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.142583] sd 6:0:0:4: [sdg] Attached SCSI removable disk
[ 3.145101] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.148736] usb 6-2: New USB device found, idVendor=1781, idProduct=0938
[ 3.148739] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.148741] usb 6-2: Product: USB IR Transceiver
[ 3.148742] usb 6-2: Manufacturer: IguanaWorks
[ 3.150501] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.333943] device-mapper: uevent: version 1.0.3
[ 3.334009] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.404802] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 3.575965] usb 7-1: New USB device found, idVendor=20df, idProduct=0001
[ 3.575970] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.575973] usb 7-1: Product: Entropy Key
[ 3.575976] usb 7-1: Manufacturer: Simtec Electronics
[ 3.575978] usb 7-1: SerialNumber: OQBsBlg0MTFBZBZD
[ 3.649066] usb 2-4.1: new full-speed USB device number 6 using ehci_hcd
[ 3.744037] usb 2-4.1: New USB device found, idVendor=046d, idProduct=c52b
[ 3.744042] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.744045] usb 2-4.1: Product: USB Receiver
[ 3.744048] usb 2-4.1: Manufacturer: Logitech
[ 3.747246] usbcore: registered new interface driver usbhid
[ 3.747248] usbhid: USB HID core driver
[ 3.751172] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-4.1/input2
[ 3.752835] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.2/0003:046D:C52B.0003/input/input0
[ 3.753031] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.7-4.1:1
[ 3.817202] usb 2-4.4: new low-speed USB device number 7 using ehci_hcd
[ 3.929942] usb 2-4.4: New USB device found, idVendor=045e, idProduct=00db
[ 3.929947] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.929950] usb 2-4.4: Product: Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000
[ 3.929953] usb 2-4.4: Manufacturer: Microsoft
[ 3.940576] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.4/2-4.4:1.0/input/input1
[ 3.940747] microsoft 0003:045E:00DB.0005: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.7-4.4/input0
[ 3.951725] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.4/2-4.4:1.1/input/input2
[ 3.951884] microsoft 0003:045E:00DB.0006: input,hidraw3: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.7-4.4/input1
[ 9.380432] EXT4-fs (dm-1): orphan cleanup on readonly fs
[ 9.382492] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 684736
[ 9.383760] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 658336
[ 9.383800] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 658331
[ 9.386154] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 263519
[ 9.388569] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 668842
[ 9.388922] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 668837
[ 9.390423] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 677862
[ 9.393278] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 665288
[ 9.394525] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 656305
[ 9.394545] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 665255
[ 9.396642] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 132094
[ 9.397496] EXT4-fs (dm-1): 11 orphan inodes deleted
[ 9.397497] EXT4-fs (dm-1): recovery complete
[ 9.401149] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.862835] udevd[575]: starting version 175
[ 9.934019] ACPI: Requesting acpi_cpufreq
[ 9.934458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.934465] ACPI: Power Button [PBTN]
[ 9.936088] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.936094] ACPI: Power Button [PWRF]
[ 9.941647] wmi: Mapper loaded
[ 9.948160] EDAC MC: Ver: 2.1.0
[ 9.950277] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 9.950295] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 9.950301] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 9.975024] iTCO_vendor_support: vendor-support=0
[ 9.980053] cdc_acm 7-1:1.0: This device cannot do calls on its own. It is not a modem.
[ 9.988162] cdc_acm 7-1:1.0: ttyACM0: USB ACM device
[ 9.988258] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 9.988274] IR NEC protocol handler initialized
[ 9.988332] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.988380] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 9.990959] usbcore: registered new interface driver cdc_acm
[ 9.990961] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.993996] IR RC5(x) protocol handler initialized
[ 10.001900] IR RC6 protocol handler initialized
[ 10.005759] IR JVC protocol handler initialized
[ 10.010667] IR Sony protocol handler initialized
[ 10.015395] IR MCE Keyboard/mouse protocol handler initialized
[ 10.020303] lirc_dev: IR Remote Control driver registered, major 250
[ 10.023263] IR LIRC bridge handler initialized
[ 10.024750] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.024753] Disabling lock debugging due to kernel taint
[ 10.038901] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[ 10.038923] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.051773] [fglrx] Maximum main memory to use for locked dma buffers: 23631 MBytes.
[ 10.051914] [fglrx] vendor: 1002 device: 6779 count: 1
[ 10.052256] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 10.052274] pci 0000:0f:00.0: setting latency timer to 64
[ 10.052497] [fglrx] Kernel PAT support is enabled
[ 10.052510] [fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
[ 10.078724] hda_codec: ALC262: SKU not ready 0x411111f0
[ 10.078792] hda_codec: ALC262: BIOS auto-probing.
[ 10.080972] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 10.085120] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 10.085730] snd_hda_intel 0000:0f:00.1: irq 68 for MSI/MSI-X
[ 10.085751] snd_hda_intel 0000:0f:00.1: setting latency timer to 64
[ 10.104539] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.104635] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input8
[ 10.165097] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 13.984849] iguanair 6-2:1.0: failed to get version
[ 13.986799] iguanair: probe of 6-2:1.0 failed with error -110
[ 13.986830] usbcore: registered new interface driver iguanair
[ 14.226995] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.453578] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 14.520607] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 17.318000] loop: module loaded
[ 17.869323] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.873967] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.110028] Bridge firewalling registered
[ 18.113515] device eth0 entered promiscuous mode
[ 18.120113] tg3 0000:01:00.0: irq 69 for MSI/MSI-X
[ 18.198748] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.203655] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 21.359473] tg3 0000:01:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 21.359478] tg3 0000:01:00.0: eth0: Flow control is off for TX and off for RX
[ 21.361239] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.361267] br0: port 1(eth0) entering forwarding state
[ 21.361273] br0: port 1(eth0) entering forwarding state
[ 21.362944] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 28.699279] RPC: Registered named UNIX socket transport module.
[ 28.699283] RPC: Registered udp transport module.
[ 28.699285] RPC: Registered tcp transport module.
[ 28.699287] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.711349] FS-Cache: Loaded
[ 28.729391] FS-Cache: Netfs 'nfs' registered for caching
[ 28.742111] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.076661] Loading iSCSI transport class v2.0-870.
[ 29.085503] iscsi: registered transport (tcp)
[ 29.108325] iscsi: registered transport (iser)
[ 29.420021] scsi7 : iSCSI Initiator over TCP/IP
[ 29.423419] scsi8 : iSCSI Initiator over TCP/IP
[ 30.433919] scsi 7:0:0:0: Direct-Access EMC LIFELINE-DISK 1 PQ: 0 ANSI: 4
[ 30.434282] sd 7:0:0:0: Attached scsi generic sg8 type 0
[ 30.434634] scsi 8:0:0:0: Direct-Access EMC LIFELINE-DISK 1 PQ: 0 ANSI: 4
[ 30.434895] sd 8:0:0:0: Attached scsi generic sg9 type 0
[ 30.435375] sd 7:0:0:0: [sdh] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[ 30.435774] sd 7:0:0:0: [sdh] Write Protect is off
[ 30.435780] sd 7:0:0:0: [sdh] Mode Sense: 77 00 00 08
[ 30.436067] sd 8:0:0:0: [sdi] 2936012800 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 30.436342] sd 8:0:0:0: [sdi] Write Protect is off
[ 30.436347] sd 8:0:0:0: [sdi] Mode Sense: 77 00 00 08
[ 30.436546] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.437094] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.440496] sdh: unknown partition table
[ 30.440706] sdi: unknown partition table
[ 30.442487] sd 7:0:0:0: [sdh] Attached SCSI disk
[ 30.442779] sd 8:0:0:0: [sdi] Attached SCSI disk
[ 30.912438] 8021q: 802.1Q VLAN Support v1.8
[ 31.400905] br0: no IPv6 routers present
[ 31.555152] lp: driver loaded but no devices found
[ 31.559526] ppdev: user-space parallel port driver
--- End Message ---