--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-686-pae: p54 driver fails to reload firmware coming out of suspend to RAM
- From: Paul Bryan Roberts <pbronline-debian@yahoo.co.uk>
- Date: Thu, 24 Jan 2013 15:23:48 +0000
- Message-id: <20130124152348.5898.27644.reportbug@larch>
Package: src:linux
Version: 3.2.35-2
Severity: normal
Dear Maintainer,
* What led up to the situation?
Either:
a) request Suspend at the XFCE desktop
b) set Power Manager to suspend after a period of inactivty
Then:
resume from suspend by touchpad or keyboard activity
* What exactly did you do (or not do) that was effective ?
I did (or did not) as I always did (or did not) when running
Debian Squeeze: the Wheezy behaviour is regressive.
* What was the outcome of this action?
No wireless network connection after resumse
(until the PCMCIA network card is ejcted and reinserted).
* What outcome did you expect instead?
Wireless connection to be restablished automatically by
the desktop network manager (wicd in this instance).
-- Notes
dmesg below shows the end of failure to resume and then
the success after ejecting and reinserting the card.
The firmware image is 2.13.1.0.arm
(md5sum 8ff41cff31c9323330d6170b54735477) taken from
http://daemonizer.de/prism54/prism54-fw/.
This is not the most recent image but it is the most
recent that the network card will boot.
Repeat, resume from suspend to RAM worked perfectly
well under Debian Squeeze with this firmware image.
The machine also fails to recover the wireless network
connnection after hibernation.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=1d6f9e11-20cb-4aa9-945b-ca7961131bea ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 2667.981805] [<c11f3b4a>] ? __driver_attach+0x5b/0x5b
[ 2667.981816] [<c11f33b9>] ? bus_probe_device+0x1f/0x74
[ 2667.981847] [<c11f1f0d>] ? device_add+0x388/0x4e7
[ 2667.981864] [<c1171418>] ? pci_bus_read_config_byte+0x51/0x5a
[ 2667.981878] [<c1171d22>] ? pci_bus_add_device+0xc/0x2c
[ 2667.981888] [<c1171e2e>] ? pci_bus_add_devices+0x1d/0xaf
[ 2667.981912] [<d81c0113>] ? cb_alloc+0x97/0xf84 [pcmcia_core]
[ 2667.981929] [<d81bfa51>] ? socket_late_resume+0x78/0x93 [pcmcia_core]
[ 2667.981945] [<d81bfa85>] ? pcmcia_socket_dev_resume+0x19/0x27 [pcmcia_core]
[ 2667.981956] [<c11f77b1>] ? pm_op+0x84/0x108
[ 2667.981967] [<c11f7ab8>] ? device_resume+0x78/0xc1
[ 2667.981977] [<c11f813c>] ? dpm_resume+0xbe/0x151
[ 2667.981988] [<c11f82d9>] ? dpm_resume_end+0x8/0x10
[ 2667.982006] [<c1062d96>] ? suspend_devices_and_enter+0x1a3/0x1db
[ 2667.982016] [<c1062edf>] ? enter_state+0x111/0x14d
[ 2667.982027] [<c1062119>] ? state_store+0x93/0xcd
[ 2667.982037] [<c1062086>] ? pm_async_store+0x2d/0x2d
[ 2667.982060] [<c115de3b>] ? kobj_attr_store+0x18/0x1c
[ 2667.982082] [<c1110065>] ? sysfs_write_file+0xb6/0xe3
[ 2667.982093] [<c110ffaf>] ? sysfs_poll+0x60/0x60
[ 2667.982123] [<c10cc83f>] ? vfs_write+0x83/0xd4
[ 2667.982134] [<c10cc9ff>] ? sys_write+0x3d/0x61
[ 2667.982150] [<c12c641f>] ? sysenter_do_call+0x12/0x28
[ 2667.982159] ---[ end trace d6af62e7099b8a09 ]---
[ 2667.982170] p54pci 0000:02:00.0: firmware: isl3886pci will not be loaded
[ 2667.982181] ------------[ cut here ]------------
[ 2667.982193] WARNING: at /build/buildd-linux_3.2.35-2-i386-pOtnxQ/linux-3.2.35/drivers/base/firmware_class.c:547 _request_firmware+0xbe/0x334()
[ 2667.982202] Hardware name: Versa Premium
[ 2667.982206] Modules linked in: sis sisfb drm ppdev lp bnep rfcomm bluetooth autofs4 uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop arc4 p54pci p54common mac80211 cfg80211 joydev rfkill snd_trident snd_ac97_codec snd_util_mem snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_rawmidi pcmcia snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer psmouse snd yenta_socket shpchp serio_raw pcmcia_rsrc evdev pcmcia_core pcspkr soundcore ac97_bus gameport i2c_sis630 i2c_core button battery irda parport_pc parport crc_ccitt processor ac power_supply thermal_sys ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ehci_hcd usbcore ata_generic usb_common pata_sis libata floppy scsi_mod [last unloaded: scsi_wait_scan]
[ 2667.982336] Pid: 4996, comm: pm-suspend Tainted: G W 3.2.0-4-686-pae #1 Debian 3.2.35-2
[ 2667.982343] Call Trace:
[ 2667.982355] [<c10383ac>] ? warn_slowpath_common+0x68/0x79
[ 2667.982366] [<c11fad7c>] ? _request_firmware+0xbe/0x334
[ 2667.982378] [<c10383ca>] ? warn_slowpath_null+0xd/0x10
[ 2667.982389] [<c11fad7c>] ? _request_firmware+0xbe/0x334
[ 2667.982402] [<c11faffb>] ? request_firmware+0x9/0xc
[ 2667.982416] [<d8293f0d>] ? p54p_probe+0x29a/0x32e [p54pci]
[ 2667.982432] [<c100e0f3>] ? dma_set_mask+0x35/0x35
[ 2667.982444] [<c1176263>] ? pci_device_probe+0x53/0x9a
[ 2667.982457] [<c11f3a6f>] ? driver_probe_device+0x8c/0x10c
[ 2667.982467] [<c11f2a59>] ? bus_for_each_drv+0x37/0x60
[ 2667.982478] [<c11f39b2>] ? device_attach+0x58/0x74
[ 2667.982488] [<c11f3b4a>] ? __driver_attach+0x5b/0x5b
[ 2667.982498] [<c11f33b9>] ? bus_probe_device+0x1f/0x74
[ 2667.982511] [<c11f1f0d>] ? device_add+0x388/0x4e7
[ 2667.982521] [<c1171418>] ? pci_bus_read_config_byte+0x51/0x5a
[ 2667.982533] [<c1171d22>] ? pci_bus_add_device+0xc/0x2c
[ 2667.982543] [<c1171e2e>] ? pci_bus_add_devices+0x1d/0xaf
[ 2667.982564] [<d81c0113>] ? cb_alloc+0x97/0xf84 [pcmcia_core]
[ 2667.982581] [<d81bfa51>] ? socket_late_resume+0x78/0x93 [pcmcia_core]
[ 2667.982596] [<d81bfa85>] ? pcmcia_socket_dev_resume+0x19/0x27 [pcmcia_core]
[ 2667.982607] [<c11f77b1>] ? pm_op+0x84/0x108
[ 2667.982617] [<c11f7ab8>] ? device_resume+0x78/0xc1
[ 2667.982628] [<c11f813c>] ? dpm_resume+0xbe/0x151
[ 2667.982638] [<c11f82d9>] ? dpm_resume_end+0x8/0x10
[ 2667.982649] [<c1062d96>] ? suspend_devices_and_enter+0x1a3/0x1db
[ 2667.982660] [<c1062edf>] ? enter_state+0x111/0x14d
[ 2667.982670] [<c1062119>] ? state_store+0x93/0xcd
[ 2667.982679] [<c1062086>] ? pm_async_store+0x2d/0x2d
[ 2667.982694] [<c115de3b>] ? kobj_attr_store+0x18/0x1c
[ 2667.982710] [<c1110065>] ? sysfs_write_file+0xb6/0xe3
[ 2667.982721] [<c110ffaf>] ? sysfs_poll+0x60/0x60
[ 2667.982732] [<c10cc83f>] ? vfs_write+0x83/0xd4
[ 2667.982743] [<c10cc9ff>] ? sys_write+0x3d/0x61
[ 2667.982754] [<c12c641f>] ? sysenter_do_call+0x12/0x28
[ 2667.982761] ---[ end trace d6af62e7099b8a0a ]---
[ 2667.982769] p54pci 0000:02:00.0: firmware: isl3886 will not be loaded
[ 2667.982859] p54pci: probe of 0000:02:00.0 failed with error -16
[ 2668.120289] PM: resume of devices complete after 3219.954 msecs
[ 2668.120786] PM: Finishing wakeup.
[ 2668.120796] Restarting tasks ... done.
[ 2699.257111] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 2702.160098] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 2702.160161] pci 0000:02:00.0: [1260:3890] type 0 class 0x000280
[ 2702.160206] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00001fff]
[ 2702.160346] pci 0000:02:00.0: supports D1 D2
[ 2702.160356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2702.160413] pci 0000:02:00.0: BAR 0: assigned [mem 0x28000000-0x28001fff]
[ 2702.160881] p54pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 2702.160940] p54pci 0000:02:00.0: setting latency timer to 64
[ 2702.210914] p54pci 0000:02:00.0: firmware: agent loaded isl3886pci into memory
[ 2702.220943] ieee80211 phy2: p54 detected a LM86 firmware
[ 2702.220955] p54: rx_mtu reduced from 3240 to 2376
[ 2702.220964] ieee80211 phy2: FW rev 2.13.1.0 - Softmac protocol 5.5
[ 2702.220976] ieee80211 phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[ 2703.132554] ieee80211 phy2: hwaddr 00:09:5b:ee:e5:0e, MAC:isl3886 RF:Frisbee
[ 2703.133156] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 2703.147909] Registered led device: p54-phy2::assoc
[ 2703.148940] Registered led device: p54-phy2::tx
[ 2703.149070] Registered led device: p54-phy2::rx
[ 2703.149166] Registered led device: p54-phy2::radio
[ 2703.149196] p54pci 0000:02:00.0: is registered as 'phy2'
[ 2703.615634] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2704.669254] wlan0: authenticate with e0:46:9a:06:e6:7a (try 1)
[ 2704.672770] wlan0: authenticated
[ 2704.675802] wlan0: associate with e0:46:9a:06:e6:7a (try 1)
[ 2704.680976] wlan0: RX AssocResp from e0:46:9a:06:e6:7a (capab=0x431 status=0 aid=2)
[ 2704.681007] wlan0: associated
[ 2704.682625] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2715.296065] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
sis
sisfb
drm
ppdev
lp
bnep
rfcomm
bluetooth
autofs4
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
arc4
p54pci
p54common
mac80211
cfg80211
joydev
rfkill
snd_trident
snd_ac97_codec
snd_util_mem
snd_mpu401_uart
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
pcmcia
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
psmouse
snd
yenta_socket
shpchp
serio_raw
pcmcia_rsrc
evdev
pcmcia_core
pcspkr
soundcore
ac97_bus
gameport
i2c_sis630
i2c_core
button
battery
irda
parport_pc
parport
crc_ccitt
processor
ac
power_supply
thermal_sys
ext4
crc16
jbd2
mbcache
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ohci_hcd
ehci_hcd
usbcore
ata_generic
usb_common
pata_sis
libata
floppy
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary wired interface
allow-hotplug eth0
iface eth0 inet dhcp
# The primary wireless interface
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/network/custards.conf
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:09:5b:ee:e5:0e brd ff:ff:ff:ff:ff:ff
inet 192.168.19.20/24 brd 192.168.19.255 scope global wlan0
inet6 fe80::209:5bff:feee:e50e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 125672 431 0 0 0 0 0 0 125672 431 0 0 0 0 0 0
wlan0: 790284 1315 0 0 0 0 0 0 229775 1214 0 0 0 0 0 0
*** Protocol statistics:
Ip:
6058 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
6009 incoming packets delivered
4453 requests sent out
5 dropped because of missing route
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 6
echo replies: 2
2 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo request: 2
IcmpMsg:
InType0: 2
InType3: 6
OutType8: 2
Tcp:
32 active connections openings
6 passive connection openings
0 failed connection attempts
0 connection resets received
5 connections established
5513 segments received
4401 segments send out
12 segments retransmited
0 bad segments received.
1 resets sent
Udp:
1088 packets received
0 packets to unknown port received.
0 packet receive errors
456 packets sent
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
18 TCP sockets finished time wait in fast timer
92 delayed acks sent
1 delayed acks further delayed because of locked socket
3 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
3470 packet headers predicted
283 acknowledgments not containing data payload received
2604 predicted acknowledgments
12 retransmits in slow start
26 packets collapsed in receive queue due to low socket buffer
IpExt:
InMcastPkts: 61
OutMcastPkts: 64
InBcastPkts: 569
OutBcastPkts: 117
InOctets: 3072710
OutOctets: 686797
InMcastOctets: 8461
OutMcastOctets: 8513
InBcastOctets: 67824
OutBcastOctets: 13411
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 630 Host [1039:0630] (rev 31)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513] (rev d0) (prog-if 80 [Master])
Subsystem: Packard Bell B.V. Device [1631:9001]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 1400 [size=16]
Kernel driver in use: pata_sis
00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: sis630_smbus
00:01.2 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:01.4 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator [1039:7018] (rev 02)
Subsystem: Packard Bell B.V. Device [1631:2005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at ec001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: snd_trident
00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0001] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ec100000-ec1fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:08.0 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
Subsystem: Packard Bell B.V. Device [1631:8000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 2c000000-2fffffff (prefetchable)
Memory window 1: 28000000-2bffffff
I/O window 0: 00002400-000024ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
00:08.1 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
Subsystem: Packard Bell B.V. Device [1631:8000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 1c000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 24000000-27ffffff (prefetchable)
Memory window 1: 20000000-23ffffff
I/O window 0: 00001c00-00001cff
I/O window 1: 00001800-000018ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter [1039:6300] (rev 31) (prog-if 00 [VGA controller])
Subsystem: Packard Bell B.V. Device [1631:1002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
BIST result: 00
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: sisfb
02:00.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01)
Subsystem: Netgear WG511 v2/v3 54 Mbps Wireless PC Card [1385:4800]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 28000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: p54pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-37
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
--- End Message ---