--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-3-powerpc64: Cannot mount SD card (since a 2-3 months ago); looks like infnite loop
- From: dougmencken <dougmencken@gmail.com>
- Date: Tue, 31 Jul 2012 13:36:13 -0400
- Message-id: <20120731173613.6661.18623.reportbug@g5.local>
Package: src
Version: 3.2.23-1
Severity: normal
* What led up to the situation?
Since a 2-3 months ago, I started to be unable to mound SD cards.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I plugged it into card reader.
* What was the outcome of this action?
The terminal with executed `mount' looks looped infinitely, nobody can stop it
(even kill -9). Only removing the card from card reader.
* What outcome did you expect instead?
Mounting of SD card as mass storage.
Related parts of dmesg:
--------------------------------------------------------------------------------
....
[ 4.432274] sd 6:0:0:3: [sdg] 8058880 512-byte logical blocks: (4.12 GB/3.84
GiB)
[ 4.447908] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 4.456917] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.458252] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 4.458321] sd 6:0:0:3: [sdg] Write Protect is off
[ 4.458326] sd 6:0:0:3: [sdg] Mode Sense: 03 00 00 00
[ 4.459386] sd 6:0:0:3: [sdg] No Caching mode page present
[ 4.459391] sd 6:0:0:3: [sdg] Assuming drive cache: write through
[ 4.501505] sd 6:0:0:3: [sdg] No Caching mode page present
[ 4.509576] sd 6:0:0:3: [sdg] Assuming drive cache: write through
[ 4.520251] sdg: sdg1
[ 4.532620] sd 6:0:0:3: [sdg] No Caching mode page present
[ 4.540627] sd 6:0:0:3: [sdg] Assuming drive cache: write through
[ 4.548483] sd 6:0:0:3: [sdg] Attached SCSI removable disk
-------- <<<<<<<< here I removed the card; no messages skipped >>>>>>>>
--------
[ 58.604965] sd 6:0:0:3: [sdg] Device not ready
[ 58.612670] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 58.620500] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 58.628314] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 58.636090] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 7a f7 f0 00 00 08 00
[ 58.644036] end_request: I/O error, dev sdg, sector 8058864
[ 58.651881] Buffer I/O error on device sdg, logical block 1007358
[ 58.660836] sd 6:0:0:3: [sdg] Device not ready
[ 58.668688] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 58.676652] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 58.684462] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 58.692058] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 7a f7 f0 00 00 08 00
[ 58.699584] end_request: I/O error, dev sdg, sector 8058864
[ 58.707122] Buffer I/O error on device sdg, logical block 1007358
[ 58.715709] sd 6:0:0:3: [sdg] Device not ready
[ 58.723237] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 58.730775] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 58.738159] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 58.745365] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 58.752644] end_request: I/O error, dev sdg, sector 0
[ 58.752649] Buffer I/O error on device sdg, logical block 0
[ 58.767957] sd 6:0:0:3: [sdg] Device not ready
[ 58.774933] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 58.781857] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
.... (~ 900 messages skipped)
[ 64.579806] sd 6:0:0:3: [sdg] Device not ready
[ 64.586328] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 64.592933] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 64.599515] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 64.606090] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 00 00 38 00 00 08 00
[ 64.612767] end_request: I/O error, dev sdg, sector 56
[ 64.620298] sd 6:0:0:3: [sdg] Device not ready
[ 64.626841] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 64.633465] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 64.640067] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 64.646656] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 64.653340] end_request: I/O error, dev sdg, sector 0
[ 64.660931] sd 6:0:0:3: [sdg] Device not ready
[ 64.667470] sd 6:0:0:3: [sdg] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 64.674095] sd 6:0:0:3: [sdg] Sense Key : Not Ready [current]
[ 64.680691] sd 6:0:0:3: [sdg] Add. Sense: Medium not present
[ 64.687278] sd 6:0:0:3: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 64.693960] end_request: I/O error, dev sdg, sector 0
[ 64.705295] sdg: detected capacity change from 4126146560 to 0
[ 64.837598] windfarm: initializing for dual-core desktop G5
[ 65.220031] PM: Starting manual resume from disk
....
--------------------------------------------------------------------------------
P.S.: It says about "I/O errors" and so. But with the same SD cards and the
same cardreader it works okay on other OS on the same machine, on the other
machines, and inside my photo camera. Before that, I have an ability to mount
SD cards (I suppose it is not related to kernel v3.2.0, but probably to the
some earlier version).
-- Package-specific info:
** Version:
Linux version 3.2.0-3-powerpc64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 08:03:56 UTC 2012
** Command line:
root=UUID=f19b14f9-cf5e-4b6b-9220-09fd49d5ca4e ro
** Not tainted
** Kernel log:
[ 69.233544] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 0 at offset 0x05EE
[ 69.233673] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 1 at offset 0x0A6A
[ 69.245796] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 2 at offset 0x106C
[ 69.245830] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 3 at offset 0x1175
[ 69.247188] i2c i2c-5: wf_smu_sat: attach_adapter method is deprecated
[ 69.247200] i2c i2c-5: Please use another way to instantiate your i2c_client
[ 69.247211] i2c i2c-5: wf_lm75: attach_adapter method is deprecated
[ 69.247219] i2c i2c-5: Please use another way to instantiate your i2c_client
[ 69.247229] i2c i2c-5: wf_max6690: attach_adapter method is deprecated
[ 69.247237] i2c i2c-5: Please use another way to instantiate your i2c_client
[ 69.247246] i2c i2c-5: aoa_codec_onyx: attach_adapter method is deprecated
[ 69.247255] i2c i2c-5: Please use another way to instantiate your i2c_client
[ 69.250428] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 4 at offset 0x126A
[ 69.250448] [drm] nouveau 0000:0a:00.0: mem timing table length unknown: 14
[ 69.561187] adt7475 5-002e: ADT7473 device, revision 0
[ 69.571183] [drm] nouveau 0000:0a:00.0: Detected monitoring device: adt7473
[ 69.571192] [drm] nouveau 0000:0a:00.0: 3 available performance level(s)
[ 69.571211] [drm] nouveau 0000:0a:00.0: 0: core 275MHz shader 275MHz memory 1050MHz voltage 1200mV fanspeed 100%
[ 69.571225] [drm] nouveau 0000:0a:00.0: 1: core 450MHz shader 415MHz memory 1050MHz voltage 1400mV fanspeed 100%
[ 69.571239] [drm] nouveau 0000:0a:00.0: 2: core 470MHz shader 430MHz memory 1050MHz voltage 1400mV fanspeed 100%
[ 69.571270] [drm] nouveau 0000:0a:00.0: c: core 200MHz shader 200MHz memory 700MHz voltage 1200mV
[ 69.571699] nouveau 0000:0a:00.0: Using 32-bit DMA via iommu
[ 69.571798] [TTM] Zone kernel: Available graphics memory: 3017848 kiB.
[ 69.571806] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 69.571817] [TTM] Initializing pool allocator.
[ 69.571854] [drm] nouveau 0000:0a:00.0: Detected 512MiB VRAM
[ 69.592009] [drm] nouveau 0000:0a:00.0: 512 MiB GART (aperture)
[ 69.600997] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 69.601007] [drm] No driver support for vblank timestamp query.
[ 69.601039] [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 69.601050] [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 69.601061] [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 69.601071] [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 69.620975] i2c i2c-6: wf_smu_sat: attach_adapter method is deprecated
[ 69.620984] i2c i2c-6: Please use another way to instantiate your i2c_client
[ 69.620995] i2c i2c-6: wf_lm75: attach_adapter method is deprecated
[ 69.621003] i2c i2c-6: Please use another way to instantiate your i2c_client
[ 69.621012] i2c i2c-6: wf_max6690: attach_adapter method is deprecated
[ 69.621020] i2c i2c-6: Please use another way to instantiate your i2c_client
[ 69.621030] i2c i2c-6: aoa_codec_onyx: attach_adapter method is deprecated
[ 69.621038] i2c i2c-6: Please use another way to instantiate your i2c_client
[ 69.726280] i2c i2c-7: wf_smu_sat: attach_adapter method is deprecated
[ 69.726288] i2c i2c-7: Please use another way to instantiate your i2c_client
[ 69.726297] i2c i2c-7: wf_lm75: attach_adapter method is deprecated
[ 69.726305] i2c i2c-7: Please use another way to instantiate your i2c_client
[ 69.726314] i2c i2c-7: wf_max6690: attach_adapter method is deprecated
[ 69.726321] i2c i2c-7: Please use another way to instantiate your i2c_client
[ 69.726330] i2c i2c-7: aoa_codec_onyx: attach_adapter method is deprecated
[ 69.726338] i2c i2c-7: Please use another way to instantiate your i2c_client
[ 69.759750] [drm] nouveau 0000:0a:00.0: allocated 1600x900 fb: 0x49000, bo c0000001f170e800
[ 69.761947] sat 0 partition c4: c4 4 1 7f 22 11 e0 e6 ff 55 a 13 ec 11 0 0
[ 69.770328] [drm] nouveau 0000:0a:00.0: 0x13E3: Parsing digital output script table
[ 69.819854] [drm] nouveau 0000:0a:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 69.819860] [drm] nouveau 0000:0a:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 69.819881] Console: switching to colour frame buffer device 200x56
[ 69.821201] fb0: nouveaufb frame buffer device
[ 69.821212] drm: registered panic notifier
[ 69.821228] [drm] Initialized nouveau 1.0.0 20120316 for 0000:0a:00.0 on minor 0
[ 70.384505] Adding 9765620k swap on /dev/sdb6. Priority:-1 extents:1 across:9765620k
[ 70.666066] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 41 0 20 0 0 0 7 89 37 0 a0 0 0
[ 70.802510] EXT3-fs (sdb3): using internal journal
[ 71.001304] fuse init (API version 7.17)
[ 71.070941] loop: module loaded
[ 71.114941] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 71.334742] sat 0 partition c5: c5 4 1 7f 22 11 e0 e6 ff 55 9a 13 ec 11 0 0
[ 71.744552] windfarm: Backside control loop started.
[ 71.798739] windfarm: Slots control loop started.
[ 71.906842] windfarm: Drive bay control loop started.
[ 72.423166] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 72.508091] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 75.092851] u3msi: allocated virq 0x20 (hw 0x8) addr 0xfee00000
[ 75.138168] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 75.227881] RPC: Registered named UNIX socket transport module.
[ 75.228538] RPC: Registered udp transport module.
[ 75.229114] RPC: Registered tcp transport module.
[ 75.229684] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 75.292013] FS-Cache: Loaded
[ 75.377064] FS-Cache: Netfs 'nfs' registered for caching
[ 75.411390] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 80.443937] tg3 0001:05:04.0: eth0: Link is up at 100 Mbps, full duplex
[ 80.448139] tg3 0001:05:04.0: eth0: Flow control is on for TX and on for RX
[ 80.453367] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 86.149385] Bluetooth: Core ver 2.16
[ 86.149980] NET: Registered protocol family 31
[ 86.150480] Bluetooth: HCI device and connection manager initialized
[ 86.150981] Bluetooth: HCI socket layer initialized
[ 86.151469] Bluetooth: L2CAP socket layer initialized
[ 86.152086] Bluetooth: SCO socket layer initialized
[ 86.205844] Bluetooth: RFCOMM TTY layer initialized
[ 86.206407] Bluetooth: RFCOMM socket layer initialized
[ 86.206904] Bluetooth: RFCOMM ver 1.11
[ 87.319956] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 87.319963] Bluetooth: BNEP filters: protocol multicast
[ 88.014634] lp: driver loaded but no devices found
[ 90.787609] eth0: no IPv6 routers present
[ 110.350729] tg3 0001:05:04.0: eth0: Link is down
[ 112.121251] tg3 0001:05:04.0: eth0: Link is up at 100 Mbps, full duplex
[ 112.121267] tg3 0001:05:04.0: eth0: Flow control is on for TX and on for RX
[ 240.155305] EXT4-fs (sdc2): warning: maximal mount count reached, running e2fsck is recommended
[ 240.264608] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
** Model information
revision : 1.1 (pvr 0044 0101)
revision : 1.1 (pvr 0044 0101)
platform : PowerMac
model : PowerMac11,2
machine : PowerMac11,2
motherboard : PowerMac11,2 MacRISC4 Power Macintosh
** Loaded modules:
nls_utf8
hfsplus
cpufreq_stats
cpufreq_ondemand
cpufreq_conservative
parport_pc
cpufreq_userspace
lp
cpufreq_powersave
parport
bnep
rfcomm
bluetooth
rfkill
snd_hrtimer
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
lockd
fscache
sunrpc
ext4
crc16
jbd2
snd_powermac
loop
firewire_sbp2
fuse
adt7475
hwmon_vid
snd_aoa_codec_onyx
snd_aoa_fabric_layout
snd_aoa
snd_aoa_i2sbus
snd_aoa_soundbus
nouveau
snd_pcm_oss
snd_mixer_oss
snd_pcm
ttm
drm_kms_helper
drm
evdev
joydev
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
i2c_powermac
snd_seq
snd_seq_device
snd_timer
snd
soundcore
snd_page_alloc
ext3
mbcache
jbd
windfarm_cpufreq_clamp
windfarm_max6690_sensor
windfarm_lm75_sensor
windfarm_smu_sensors
windfarm_smu_controls
windfarm_pm112
windfarm_smu_sat
windfarm_pid
windfarm_core
sd_mod
crc_t10dif
usbhid
ata_generic
usb_storage
hid
uas
ohci_hcd
ehci_hcd
usbcore
firewire_ohci
sr_mod
cdrom
sata_svw
tg3
libphy
firewire_core
crc_itu_t
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0
broadcast 127.255.255.255
network 127.0.0.0
allow-hotplug eth0
iface eth0 inet dhcp
hostname 192.168.0.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:14:51:67:31:72 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.100/24 brd 192.168.0.255 scope global eth0
inet6 fe80::214:51ff:fe67:3172/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:14:51:67:31:73 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 80253066 60029 0 0 0 0 0 52 4130249 39625 0 0 0 0 0 0
*** Protocol statistics:
Ip:
59992 total packets received
0 forwarded
0 incoming packets discarded
59992 incoming packets delivered
39539 requests sent out
1 dropped because of missing route
Icmp:
66 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 60
timeout in transit: 3
echo replies: 3
1830 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1827
echo request: 3
IcmpMsg:
InType0: 3
InType3: 60
InType11: 3
OutType3: 1827
OutType8: 3
Tcp:
468 active connections openings
0 passive connection openings
0 failed connection attempts
53 connection resets received
4 connections established
56402 segments received
35712 segments send out
422 segments retransmited
0 bad segments received.
545 resets sent
Udp:
1229 packets received
2280 packets to unknown port received.
0 packet receive errors
1574 packets sent
UdpLite:
TcpExt:
6 packets pruned from receive queue because of socket buffer overrun
188 TCP sockets finished time wait in fast timer
811 delayed acks sent
Quick ack mode was activated 598 times
44869 packet headers predicted
904 acknowledgments not containing data payload received
154 predicted acknowledgments
5 congestion windows recovered without slow start by DSACK
220 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
3 timeouts in loss state
2 retransmits in slow start
328 other TCP timeouts
446 packets collapsed in receive queue due to low socket buffer
519 DSACKs sent for old packets
64 DSACKs received
45 connections reset due to unexpected data
53 connections reset due to early user close
6 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 22
TCPSackShiftFallback: 22
IpExt:
InMcastPkts: 65
OutMcastPkts: 18
InBcastPkts: 16
OutBcastPkts: 14
InOctets: 79173514
OutOctets: 3403683
InMcastOctets: 21944
OutMcastOctets: 3488
InBcastOctets: 1808
OutBcastOctets: 656
** PCI devices:
0000:00:0b.0 PCI bridge [0604]: Apple Inc. CPC945 PCIe Bridge [106b:005b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90000000-bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0000:0a:00.0 VGA compatible controller [0300]: NVIDIA Corporation G70GL [Quadro FX 4500] [10de:009d] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device [10de:004d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at 91000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at 90000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
0001:00:00.0 Host bridge [0600]: Apple Inc. U4 HT Bridge [106b:0074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
0001:00:01.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-X bridge [1166:0130] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:02.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-X bridge [1166:0130] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fa500000-fa5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:03.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge [1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:04.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge [1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:05.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge [1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:06.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge [1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:07.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0053] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: fa000000-fa3fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:08.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0054] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:09.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0055] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fa400000-fa4fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O [106b:004f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:01:0b.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 70
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:01:0b.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 70
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:01:0b.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 70
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
0001:03:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin ? routed to IRQ 18
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at fa402000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: sata_svw
0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE [106b:0050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 38
Region 0: Memory at fa404000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. Shasta Firewire [106b:0052] (prog-if 10 [OHCI])
Subsystem: Apple Inc. Device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at fa400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0001:05:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet [14e4:166a] (rev 03)
Subsystem: Apple Inc. Device [106b:0085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fa530000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fa520000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
0001:05:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet [14e4:166a] (rev 03)
Subsystem: Apple Inc. Device [106b:0085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 67
Region 0: Memory at fa510000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fa500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1058:1021 Western Digital Technologies, Inc. Elements 2TB
Bus 002 Device 002: ID 1267:0103 Logic3 / SpectraVideo plc G-720 Keyboard
Bus 001 Device 007: ID 0cf2:6230 ENE Technology, Inc.
Bus 001 Device 008: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc64)
Kernel: Linux 3.2.0-3-powerpc64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.45
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-powerpc64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-powerpc64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.2 <none>
pn mkvmlinuz <none>
Versions of packages linux-image-3.2.0-3-powerpc64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-powerpc64/postinst/depmod-error-initrd-3.2.0-3-powerpc64: false
linux-image-3.2.0-3-powerpc64/prerm/removing-running-kernel-3.2.0-3-powerpc64: true
linux-image-3.2.0-3-powerpc64/postinst/missing-firmware-3.2.0-3-powerpc64:
linux-image-3.2.0-3-powerpc64/postinst/ignoring-ramdisk:
--- End Message ---