[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#968188: marked as done (linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B)

Your message dated Sun, 31 Jan 2021 08:10:09 +0000
with message-id <E1l67o9-000GwQ-T0@fasolo.debian.org>
and subject line Bug#968188: fixed in linux 5.10.12-1
has caused the Debian Bug report #968188,
regarding linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
968188: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968188
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 5.7.10-1
Severity: important


Dear Maintainer,

My display has 3840x2160 resulution.
The kernel from Raspberry Pi Foundation can use 3840x2160.

But the debian kernel can only use 1920×1280.

By the lack of DRM reported at
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968181
I can only use fbdev_backend in weston/wayland and
xserver-xorg-video-fbdev.

They only recognize 1920×1280. Relevant Debian kernel log is

[    0.920977] simple-framebuffer 3e267000.framebuffer: framebuffer at 0x3e267000, 0x960000 bytes, mapped to 0x(____ptrval____)
[    0.921003] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680
[    0.946638] Console: switching to colour frame buffer device 240x80
[    0.971786] simple-framebuffer 3e267000.framebuffer: fb0: simplefb registered!

Best regards, Ryutaroh Matsumoto

-- Package-specific info:
** Version:
Linux version 5.7.0-2-arm64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.7.10-1 (2020-07-26)

** Command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes net.ifnames=0  rootwait systemd.unified_cgroup_hierarchy=1

** Tainted: C (1024)
 * staging driver was loaded

** Kernel log:
Unable to read kernel log; any relevant messages should be attached
dmesg output is below:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.7.0-2-arm64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.7.10-1 (2020-07-26)
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000029000000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x1ff0730c0-0x1ff074fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2015232
[    0.000000]   DMA zone: 3072 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s93720 r8192 d29160 u131072
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: EL2 vector hardening
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] CPU features: detected: ARM erratum 1319367
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1983488
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes net.ifnames=0  rootwait systemd.unified_cgroup_hierarchy=1
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x25000000-0x29000000] (64MB)
[    0.000000] Memory: 4732836K/8060928K available (10684K kernel code, 1848K rwdata, 3808K rodata, 5184K init, 561K bss, 277044K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x48/0x5d0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 36810 entries in 144 pages
[    0.000000] ftrace: allocated 144 pages with 2 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000174] Console: colour dummy device 80x25
[    0.000584] printk: console [tty0] enabled
[    0.000718] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000742] pid_max: default: 32768 minimum: 301
[    0.000904] LSM: Security Framework initializing
[    0.000944] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.001036] AppArmor: AppArmor initialized
[    0.001054] TOMOYO Linux initialized
[    0.001226] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001332] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.003385] rcu: Hierarchical SRCU implementation.
[    0.005817] EFI services will not be available.
[    0.006381] smp: Bringing up secondary CPUs ...
[    0.007019] Detected PIPT I-cache on CPU1
[    0.007084] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.007812] Detected PIPT I-cache on CPU2
[    0.007851] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.008548] Detected PIPT I-cache on CPU3
[    0.008588] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.008691] smp: Brought up 1 node, 4 CPUs
[    0.008753] SMP: Total of 4 processors activated.
[    0.008767] CPU features: detected: 32-bit EL0 Support
[    0.008781] CPU features: detected: CRC32 instructions
[    0.032573] CPU: All CPU(s) started at EL2
[    0.032666] alternatives: patching kernel code
[    0.173154] node 0 initialised, 746378 pages in 140ms
[    0.175353] devtmpfs: initialized
[    0.181491] Registered cp15_barrier emulation handler
[    0.181524] Registered setend emulation handler
[    0.181542] KASLR enabled
[    0.181931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.181963] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.184019] pinctrl core: initialized pinctrl subsystem
[    0.184959] thermal_sys: Registered thermal governor 'fair_share'
[    0.184964] thermal_sys: Registered thermal governor 'step_wise'
[    0.185194] DMI not present or invalid.
[    0.185842] NET: Registered protocol family 16
[    0.187447] DMA: preallocated 256 KiB pool for atomic allocations
[    0.187469] audit: initializing netlink subsys (disabled)
[    0.187702] audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
[    0.188893] cpuidle: using governor ladder
[    0.188931] cpuidle: using governor menu
[    0.189221] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.189338] ASID allocator initialised with 32768 entries
[    0.189667] Serial: AMBA PL011 UART driver
[    0.205267] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.205295] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.205310] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.205324] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.855083] ACPI: Interpreter disabled.
[    0.855352] iommu: Default domain type: Translated 
[    0.855625] vgaarb: loaded
[    0.855950] EDAC MC: Ver: 3.0.0
[    0.857244] NetLabel: Initializing
[    0.857262] NetLabel:  domain hash size = 128
[    0.857273] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.857339] NetLabel:  unlabeled traffic allowed by default
[    0.857856] clocksource: Switched to clocksource arch_sys_counter
[    0.919179] VFS: Disk quotas dquot_6.6.0
[    0.919268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.920030] AppArmor: AppArmor Filesystem Enabled
[    0.920977] simple-framebuffer 3e267000.framebuffer: framebuffer at 0x3e267000, 0x960000 bytes, mapped to 0x(____ptrval____)
[    0.921003] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680
[    0.946638] Console: switching to colour frame buffer device 240x80
[    0.971786] simple-framebuffer 3e267000.framebuffer: fb0: simplefb registered!
[    0.971987] pnp: PnP ACPI: disabled
[    0.980344] NET: Registered protocol family 2
[    0.981055] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.981263] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.981764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.982709] TCP: Hash tables configured (established 65536 bind 65536)
[    0.983125] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.983342] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.983789] NET: Registered protocol family 1
[    0.983897] NET: Registered protocol family 44
[    0.983986] PCI: CLS 0 bytes, default 64
[    0.984284] Trying to unpack rootfs image as initramfs...
[    3.074257] Freeing initrd memory: 29136K
[    3.075619] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    3.076021] kvm [1]: IPA Size Limit: 44bits
[    3.076824] kvm [1]: vgic interrupt IRQ1
[    3.077064] kvm [1]: Hyp mode initialized successfully
[    3.078842] Initialise system trusted keyrings
[    3.078971] Key type blacklist registered
[    3.079282] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    3.085749] zbud: loaded
[    3.086577] integrity: Platform Keyring initialized
[    3.086677] Key type asymmetric registered
[    3.086753] Asymmetric key parser 'x509' registered
[    3.086872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.087273] io scheduler mq-deadline registered
[    3.093008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.093718] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    3.093883] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    3.094058] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[    3.094217] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[    3.159936] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    3.160250] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    3.160367] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.160470] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    3.160668] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    3.160859] pci 0000:00:00.0: PME# supported from D0 D3hot
[    3.163286] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.163542] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    3.163681] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    3.163901] pci 0000:01:00.0: PME# supported from D0 D3hot
[    3.175946] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    3.176089] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[    3.176219] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    3.176359] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.176451] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    3.176725] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    3.176970] pcieport 0000:00:00.0: PME: Signaling with IRQ 40
[    3.177398] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[    3.177673] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    8.642324] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[    8.642525] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x890 took 5336754 usecs
[    8.651081] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    8.653068] printk: console [ttyS1] disabled
[    8.659090] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 18, base_baud = 66805845) is a 16550
[   10.781603] printk: console [ttyS1] enabled
[   10.796911] Serial: AMBA driver
[   10.809476] msm_serial: driver initialized
[   10.824629] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   10.843717] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[   10.865161] mousedev: PS/2 mouse device common for all mice
[   10.884490] ledtrig-cpu: registered to indicate activity on CPUs
[   10.903428] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[   10.922421] NET: Registered protocol family 10
[   10.975522] Segment Routing with IPv6
[   10.989305] mip6: Mobile IPv6
[   11.001497] NET: Registered protocol family 17
[   11.016859] mpls_gso: MPLS GSO support
[   11.031279] registered taskstats version 1
[   11.045783] Loading compiled-in X.509 certificates
[   11.210280] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[   11.234290] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[   11.254609] zswap: loaded using pool lzo/zbud
[   11.270210] Key type ._fscrypt registered
[   11.284518] Key type .fscrypt registered
[   11.298553] Key type fscrypt-provisioning registered
[   11.314853] AppArmor: AppArmor sha1 policy hashing enabled
[   11.336800] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 16, base_baud = 0) is a PL011 rev2
[   11.361165] serial serial0: tty port ttyAMA0 registered
[   11.379716] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01 13:23
[   11.403145] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1500000000
[   11.444383] Freeing unused kernel memory: 5184K
[   11.569596] Checked W+X mappings: passed, no W+X pages found
[   11.587215] Run /init as init process
[   11.600663]   with arguments:
[   11.600667]     /init
[   11.600672]   with environment:
[   11.600676]     HOME=/
[   11.600680]     TERM=linux
[   11.914406] usb_phy_generic phy: supply vcc not found, using dummy regulator
[   11.950923] sdhci: Secure Digital Host Controller Interface driver
[   11.969763] sdhci: Copyright(c) Pierre Ossman
[   11.990578] libphy: Fixed MDIO Bus: probed
[   12.026850] sdhci-pltfm: SDHCI platform and OF driver helper
[   12.048186] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[   12.051062] usbcore: registered new interface driver usbfs
[   12.066977] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq
[   12.084334] usbcore: registered new interface driver hub
[   12.118385] usbcore: registered new device driver usb
[   12.129879] libphy: bcmgenet MII bus: probed
[   12.138013] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO
[   12.179186] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   12.187483] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[   12.196202] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[   12.213332] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[   12.215696] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   12.217404] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   12.220438] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[   12.222128] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   12.240683] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[   12.345390] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[   12.369999] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[   12.380968] random: fast init done
[   12.410921] mmc0: new high speed SDIO card at address 0001
[   12.467952] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[   12.500729] mmc1: new ultra high speed DDR50 SDHC card at address 5048
[   12.520947] mmcblk1: mmc1:5048 SD32G 28.9 GiB 
[   12.538734]  mmcblk1: p1 p2
[   22.234559] xhci_hcd 0000:01:00.0: can't setup: -110
[   22.250678] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[   22.267623] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[   22.285557] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[   22.332017] io scheduler bfq registered
[   22.433873] raid6: neonx8   gen()  1754 MB/s
[   22.513854] raid6: neonx8   xor()  1306 MB/s
[   22.593860] raid6: neonx4   gen()  1807 MB/s
[   22.673848] raid6: neonx4   xor()  1383 MB/s
[   22.753851] raid6: neonx2   gen()  1575 MB/s
[   22.833856] raid6: neonx2   xor()  1225 MB/s
[   22.913851] raid6: neonx1   gen()  1175 MB/s
[   22.993847] raid6: neonx1   xor()   959 MB/s
[   23.073848] raid6: int64x8  gen()  1028 MB/s
[   23.153852] raid6: int64x8  xor()   590 MB/s
[   23.233870] raid6: int64x4  gen()  1007 MB/s
[   23.313846] raid6: int64x4  xor()   591 MB/s
[   23.393850] raid6: int64x2  gen()   922 MB/s
[   23.473863] raid6: int64x2  xor()   524 MB/s
[   23.553856] raid6: int64x1  gen()   723 MB/s
[   23.633861] raid6: int64x1  xor()   390 MB/s
[   23.647565] raid6: using algorithm neonx4 gen() 1807 MB/s
[   23.663533] raid6: .... xor() 1383 MB/s, rmw enabled
[   23.678615] raid6: using neon recovery algorithm
[   23.717995] xor: measuring software checksum speed
[   23.769849]    8regs     :  2391.000 MB/sec
[   23.821849]    32regs    :  2737.000 MB/sec
[   23.873849]    arm64_neon:  2502.000 MB/sec
[   23.887157] xor: using function: 32regs (2737.000 MB/sec)
[   24.130570] Btrfs loaded, crc32c=crc32c-generic
[   24.450535] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   24.669958] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   25.102527] systemd[1]: System time before build time, advancing clock.
[   25.177322] systemd[1]: Inserted module 'autofs4'
[   25.236755] systemd[1]: systemd 246-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   25.292986] systemd[1]: Detected architecture arm64.
[   25.335294] systemd[1]: Set hostname to <rpi4-20200805>.
[   25.887446] systemd[1]: /lib/systemd/system/lxc.service:17: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   25.931445] systemd[1]: /lib/systemd/system/lxc.service:18: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   26.009007] systemd[1]: tmp.mount: Cannot add dependency job, ignoring: Unit tmp.mount not found.
[   26.033363] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service not found.
[   26.063961] systemd[1]: Queued start job for default target Graphical Interface.
[   26.085942] random: systemd: uninitialized urandom read (16 bytes read)
[   26.128175] systemd[1]: Created slice system-getty.slice.
[   26.166068] random: systemd: uninitialized urandom read (16 bytes read)
[   26.204251] systemd[1]: Created slice system-modprobe.slice.
[   26.242029] random: systemd: uninitialized urandom read (16 bytes read)
[   26.276591] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   26.320644] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   26.380134] systemd[1]: Created slice system-wpa_supplicant.slice.
[   26.424407] systemd[1]: Created slice User and Session Slice.
[   26.462539] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   26.510280] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   26.559159] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   26.610218] systemd[1]: Reached target Local Encrypted Volumes.
[   26.650132] systemd[1]: Reached target Paths.
[   26.682066] systemd[1]: Reached target Remote File Systems.
[   26.722047] systemd[1]: Reached target Slices.
[   26.754080] systemd[1]: Reached target Swap.
[   26.786903] systemd[1]: Listening on Syslog Socket.
[   26.822653] systemd[1]: Listening on fsck to fsckd communication Socket.
[   26.866305] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   26.910854] systemd[1]: Listening on Journal Audit Socket.
[   26.950566] systemd[1]: Listening on Journal Socket (/dev/log).
[   26.990610] systemd[1]: Listening on Journal Socket.
[   27.026791] systemd[1]: Listening on Network Service Netlink Socket.
[   27.070745] systemd[1]: Listening on udev Control Socket.
[   27.110487] systemd[1]: Listening on udev Kernel Socket.
[   27.170767] systemd[1]: Mounting Huge Pages File System...
[   27.211835] systemd[1]: Mounting POSIX Message Queue File System...
[   27.256355] systemd[1]: Mounting Kernel Debug File System...
[   27.314390] systemd[1]: Mounting Kernel Trace File System...
[   27.355718] systemd[1]: Starting Set the console keyboard layout...
[   27.400754] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   27.466717] systemd[1]: Starting Load Kernel Module drm...
[   27.509736] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   27.534062] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   27.617437] systemd[1]: Starting Journal Service...
[   27.667138] systemd[1]: Starting Load Kernel Modules...
[   27.708182] systemd[1]: Starting Remount Root and Kernel File Systems...
[   27.756761] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard
[   27.792088] systemd[1]: Starting Coldplug All udev Devices...
[   27.864790] systemd[1]: Mounted Huge Pages File System.
[   27.902798] systemd[1]: Mounted POSIX Message Queue File System.
[   27.942764] systemd[1]: Mounted Kernel Debug File System.
[   27.982959] systemd[1]: Mounted Kernel Trace File System.
[   28.023994] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   28.079146] systemd[1]: modprobe@drm.service: Succeeded.
[   28.097062] systemd[1]: Finished Load Kernel Module drm.
[   28.136109] systemd[1]: Finished Load Kernel Modules.
[   28.183893] systemd[1]: Finished Remount Root and Kernel File Systems.
[   28.235815] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[   28.259302] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[   28.286144] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   28.309758] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   28.342362] systemd[1]: Starting Load/Save Random Seed...
[   28.423530] systemd[1]: Starting Apply Kernel Variables...
[   28.469586] systemd[1]: Starting Create System Users...
[   28.508762] systemd[1]: Finished Coldplug All udev Devices.
[   28.568022] systemd[1]: Finished Apply Kernel Variables.
[   28.622226] systemd[1]: Started Journal Service.
[   29.890560] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[   29.949349] iproc-rng200 fe104000.rng: hwrng registered
[   30.062162] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   30.093977] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   30.174779] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   30.198039] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   30.236325] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   30.265218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   30.289959] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   30.319645] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   30.448841] Bluetooth: Core ver 2.22
[   30.462797] NET: Registered protocol family 31
[   30.478081] Bluetooth: HCI device and connection manager initialized
[   30.497123] Bluetooth: HCI socket layer initialized
[   30.515858] Bluetooth: L2CAP socket layer initialized
[   30.599261] Bluetooth: SCO socket layer initialized
[   30.606399] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   30.645722] usbcore: registered new interface driver brcmfmac
[   30.694535] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin
[   30.735320] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[   30.779365] random: crng init done
[   30.788728] random: 7 urandom warning(s) missed due to ratelimiting
[   30.858470] mc: Linux media interface: v0.10
[   30.901881] Bluetooth: HCI UART driver ver 2.3
[   30.913342] Bluetooth: HCI UART protocol H4 registered
[   30.914267] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   30.925679] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   30.927852] Bluetooth: HCI UART protocol LL registered
[   30.947600] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2)
[   30.951055] videodev: Linux video capture interface: v2.00
[   30.968354] Bluetooth: HCI UART protocol ATH3K registered
[   30.968478] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   30.981917] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   30.982051] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   31.002799] Bluetooth: HCI UART protocol Intel registered
[   31.017943] bcm2835_audio bcm2835_audio: card created with 8 channels
[   31.030458] Bluetooth: HCI UART protocol Broadcom registered
[   31.047931] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[   31.048071] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[   31.048137] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[   31.069690] Bluetooth: HCI UART protocol QCA registered
[   31.166054] uart-pl011 fe201000.serial: no DMA platform data
[   31.182884] Bluetooth: HCI UART protocol AG6XX registered
[   31.182976] Bluetooth: HCI UART protocol Marvell registered
[   31.209448] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   31.438510] Bluetooth: hci0: BCM: chip id 107
[   31.451366] Bluetooth: hci0: BCM: features 0x2f
[   31.466280] Bluetooth: hci0: BCM4345C0
[   31.476762] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   31.491598] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2)
[   31.509987] bluetooth hci0: Direct firmware load for brcm/BCM4345C0.hcd failed with error -2
[   31.529969] Bluetooth: hci0: BCM: Patch brcm/BCM4345C0.hcd not found
[   31.780299] audit: type=1400 audit(1596440793.671:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=393 comm="apparmor_parser"
[   31.815952] audit: type=1400 audit(1596440793.671:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=398 comm="apparmor_parser"
[   31.850262] audit: type=1400 audit(1596440793.671:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=396 comm="apparmor_parser"
[   31.885490] audit: type=1400 audit(1596440793.671:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=396 comm="apparmor_parser"
[   31.920499] audit: type=1400 audit(1596440793.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=400 comm="apparmor_parser"
[   31.953898] audit: type=1400 audit(1596440793.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=400 comm="apparmor_parser"
[   31.986923] audit: type=1400 audit(1596440793.671:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=400 comm="apparmor_parser"
[   32.019775] audit: type=1400 audit(1596440793.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=395 comm="apparmor_parser"
[   32.054839] audit: type=1400 audit(1596440793.711:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=395 comm="apparmor_parser"
[   32.090932] audit: type=1400 audit(1596440793.711:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=395 comm="apparmor_parser"
[   33.429351] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   33.495290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.510228] Bluetooth: BNEP filters: protocol multicast
[   33.525519] Bluetooth: BNEP socket layer initialized
[   33.555398] NET: Registered protocol family 38
[   38.967931] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1410.920377] systemd-xdg-autostart-generator[541]: Not generating service for XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not supported.
[ 1423.305481] systemd-xdg-autostart-generator[576]: Not generating service for XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not supported.

** Model information
Device Tree model: Raspberry Pi 4 Model B Rev 1.4

** Loaded modules:
cmac
algif_hash
xt_CHECKSUM
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
algif_skcipher
nf_defrag_ipv4
af_alg
nft_counter
bnep
xt_tcpudp
nft_compat
bridge
stp
llc
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
bcm2835_v4l2(C)
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_bcm2835(C)
videobuf2_common
snd_pcm
videodev
btsdio
snd_timer
snd
brcmfmac
mc
soundcore
hci_uart
brcmutil
btqca
btrtl
btbcm
btintel
bluetooth
cpufreq_dt
cfg80211
vchiq(C)
raspberrypi_cpufreq
bcm2711_thermal
jitterentropy_rng
drbg
bcm2835_wdt
ansi_cprng
iproc_rng200
ecdh_generic
pwm_bcm2835
ecc
rng_core
rfkill
leds_gpio
drm
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
xor
xor_neon
zstd_decompress
zstd_compress
raid6_pq
libcrc32c
crc32c_generic
bfq
xhci_pci
xhci_hcd
dwc2
broadcom
udc_core
bcm_phy_lib
mdio_bcm_unimac
usbcore
genet
of_mdio
sdhci_iproc
sdhci_pltfm
i2c_bcm2835
usb_common
fixed_phy
sdhci
libphy
gpio_regulator
phy_generic

** Network interface configuration:
*** /etc/network/interfaces:
source-directory /etc/network/interfaces.d

*** /etc/network/interfaces.d/eth0:
auto eth0

iface eth0 inet dhcp

*** /etc/network/interfaces.d/wlan0:
auto wlan0

iface wlan0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.9/24 brd 192.168.1.255 scope global wlan0
       valid_lft forever preferred_lft forever
    inet6 2400:4050:2ba1:ac00:dea6:32ff:febb:99da/64 scope global dynamic mngtmpaddr noprefixroute 
       valid_lft 14295sec preferred_lft 12495sec
    inet6 fe80::dea6:32ff:febb:99da/64 scope link 
       valid_lft forever preferred_lft forever
4: lxcbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 00:16:3e:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet 10.0.3.1/24 scope global lxcbr0
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:     200       4    0    0    0     0          0         0      200       4    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 wlan0:   31475     339    0    0    0     0          0         2    47373     269    0    0    0     0       0          0
lxcbr0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0


** PCI devices:
00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries Device [14e4:2711] (rev 10) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 40
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00000000-00000fff [size=4K]
	Memory behind bridge: f8000000-f80fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
			ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s (ok), Width x1 (ok)
			TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
		RootCap: CRSVisible+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
			 10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
			 AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
			 AtomicOpsCtl: ReqEn- EgressBlck-
		LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS+
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported, DRS-
			 DownstreamComp: Link Down - Not Determined
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
		RootCmd: CERptEn+ NFERptEn+ FERptEn+
		RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
			 FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
		ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
	Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?>
	Capabilities: [240 v1] L1 PM Substates
		L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
			  PortCommonModeRestoreTime=8us PortTPowerOnTime=10us
		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
			   T_CommonMode=1us LTR1.2_Threshold=0ns
		L1SubCtl2: T_PwrOn=10us
	Kernel driver in use: pcieport

01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
	Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [c4] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s (ok), Width x1 (ok)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- TPHComp- ExtTPHComp-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
	Kernel modules: xhci_pci


** USB devices:
not available


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable'), (1, 'experimental')
Architecture: arm64 (aarch64)

Kernel: Linux 5.7.0-2-arm64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.7.0-2-arm64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.137
ii  kmod                                    27+20200310-2
ii  linux-base                              4.6

Versions of packages linux-image-5.7.0-2-arm64 recommends:
ii  apparmor             2.13.4-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.7.0-2-arm64 suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-5.7           <none>

Versions of packages linux-image-5.7.0-2-arm64 is related to:
ii  firmware-amd-graphics     20200619-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20200619-1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20200619-1
ii  firmware-misc-nonfree     20200619-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Source: linux
Source-Version: 5.10.12-1
Done: Salvatore Bonaccorso <carnil@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 968188@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sat, 30 Jan 2021 21:38:57 +0100
Source: linux
Architecture: source
Version: 5.10.12-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 968181 968188 968760 977438
Changes:
 linux (5.10.12-1) unstable; urgency=medium
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.10
     - [x86] hyperv: Initialize clockevents after LAPIC is initialized
     - bpf: Fix signed_{sub,add32}_overflows type handling
     - nfsd4: readdirplus shouldn't return parent of export (CVE-2021-3178)
     - bpf: Don't leak memory in bpf getsockopt when optlen == 0
     - bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
     - bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
     - net: fix use-after-free when UDP GRO with shared fraglist
     - udp: Prevent reuseport_select_sock from reading uninitialized socks
     - netxen_nic: fix MSI/MSI-x interrupts
     - net: ipv6: Validate GSO SKB before finish IPv6 processing
     - tipc: fix NULL deref in tipc_link_xmit()
     - [arm64,armhf] net: mvpp2: Remove Pause and Asym_Pause support
     - rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request
     - esp: avoid unneeded kmap_atomic call
     - net: dcb: Validate netlink message in DCB handler
     - net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commands
     - rxrpc: Call state should be read with READ_ONCE() under some
       circumstances
     - i40e: fix potential NULL pointer dereferencing
     - [arm64,armhf] net: stmmac: Fixed mtu channged by cache aligned
     - net: sit: unregister_netdevice on newlink's error path
     - [arm64,armhf] net: stmmac: fix taprio schedule configuration
     - [arm64,armhf] net: stmmac: fix taprio configuration when base_time is in
       the past
     - net: avoid 32 x truesize under-estimation for tiny skbs
     - net: phy: smsc: fix clk error handling
     - [arm64,armhf] net: dsa: clear devlink port type before unregistering
       slave netdevs
     - rxrpc: Fix handling of an unsupported token type in rxrpc_read()
     - [arm64,armhf] net: stmmac: use __napi_schedule() for PREEMPT_RT
     - [armhf] drm/panel: otm8009a: allow using non-continuous dsi clock
     - mac80211: do not drop tx nulldata packets on encrypted links
     - mac80211: check if atf has been disabled in __ieee80211_schedule_txq
     - [arm64,armhf] net: dsa: unbind all switches from tree when DSA master
       unbinds
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.11
     - scsi: target: tcmu: Fix use-after-free of se_cmd->priv
     - [armhf] mtd: rawnand: gpmi: fix dst bit offset when extracting raw
       payload
     - mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC
       engine
     - [arm64,armhf] i2c: tegra: Wait for config load atomically while in ISR
     - [x86] platform/x86: i2c-multi-instantiate: Don't create platform device
       for INT3515 ACPI nodes
     - [x86] platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
     - ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
     - ALSA: hda/via: Add minimum mute flag
     - crypto: xor - Fix divide error in do_xor_speed()
     - dm crypt: fix copy and paste bug in crypt_alloc_req_aead
     - ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
     - btrfs: don't get an EINTR during drop_snapshot for reloc
     - btrfs: do not double free backref nodes on error
     - btrfs: fix lockdep splat in btrfs_recover_relocation
     - btrfs: don't clear ret in btrfs_start_dirty_block_groups
     - btrfs: send: fix invalid clone operations when cloning from the same
       file and root
     - fs: fix lazytime expiration handling in __writeback_single_inode()
     - mmc: core: don't initialize block size from ext_csd if not present
     - [arm64] mmc: sdhci-xenon: fix 1.8v regulator stabilization
     - dm: avoid filesystem lookup in dm_get_dev_t()
     - dm integrity: fix a crash if "recalculate" used without "internal_hash"
     - dm integrity: conditionally disable "recalculate" feature
     - drm/atomic: put state on error path
     - drm/syncobj: Fix use-after-free
     - drm/amdgpu: remove gpu info firmware of green sardine
     - [x86] drm/i915/gt: Prevent use of engine->wa_ctx after error
     - [x86] drm/i915: Check for rq->hwsp validity after acquiring RCU lock
     - ASoC: rt711: mutex between calibration and power state changes
     - SUNRPC: Handle TCP socket sends with kernel_sendpage() again
     - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad
       device
     - dm integrity: select CRYPTO_SKCIPHER
     - [x86] hyperv: Fix kexec panic/hang issues
     - scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
     - scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
     - scsi: qedi: Correct max length of CHAP secret
     - scsi: scsi_debug: Fix memleak in scsi_debug_init()
     - scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
     - [riscv64] Fix kernel time_init()
     - [riscv64] Fix sifive serial driver
     - [riscv64] Enable interrupts during syscalls with M-Mode
     - HID: logitech-dj: add the G602 receiver
     - HID: Ignore battery for Elan touchscreen on ASUS UX550
     - [arm64,armhf] ALSA: hda/tegra: fix tegra-hda on tegra30 soc
     - [riscv64] cacheinfo: Fix using smp_processor_id() in preemptible
     - [arm64] make atomic helpers __always_inline
     - xen: Fix event channel callback via INTX/GSI
     - [x86] xen: Add xen_no_vector_callback option to test PCI INTX delivery
     - [x86] xen: Fix xen_hvm_smp_init() when vector callback not available
     - [riscv64] dts: phy: fix missing mdio device and probe failure of
       vsc8541-01 device
     - [riscv64] dts: phy: add GPIO number and active state used for phy reset
     - drm/amdgpu/psp: fix psp gfx ctrl cmds
     - HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
     - drm/nouveau/bios: fix issue shadowing expansion ROMs
     - drm/nouveau/privring: ack interrupts the same way as RM
     - drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields
     - drm/nouveau/mmu: fix vram heap sizing
     - drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0
     - io_uring: flush timeouts that should already have expired
     - [riscv64] Set current memblock limit
     - [riscv64] Fix maximum allowed phsyical memory for RV32
     - nfsd: Fixes for nfsd4_encode_read_plus_data()
     - nfsd: Don't set eof on a truncated READ_PLUS
     - gpiolib: cdev: fix frame size warning in gpio_ioctl()
     - [armhf] pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting
     - RDMA/ucma: Do not miss ctx destruction steps in some cases
     - btrfs: print the actual offset in btrfs_root_name
     - scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression
     - scsi: ufs: Fix tm request when non-fatal error happens
     - bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
     - [powerpc*] Use the common INIT_DATA_SECTION macro in vmlinux.lds.S
     - [powerpc*] Fix alignment bug within the init sections
     - [arm64] entry: remove redundant IRQ flag tracing
     - bpf: Reject too big ctx_size_in for raw_tp test run
     - RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()
     - RDMA/cma: Fix error flow in default_roce_mode_store
     - printk: ringbuffer: fix line counting
     - printk: fix kmsg_dump_get_buffer length calulations
     - iov_iter: fix the uaccess area in copy_compat_iovec_from_user
     - [mips*] i2c: octeon: check correct size of maximum RECV_LEN packet
     - [armel,armhf] drm/vc4: Unify PCM card's driver_name
     - [x86] platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11
       from allow-list
     - [x86] platform/x86: hp-wmi: Don't log a warning on
       HPWMI_RET_UNKNOWN_COMMAND errors
     - ALSA: hda: Balance runtime/system PM if direct-complete is disabled
     - xsk: Clear pool even for inactive queues
     - can: dev: can_restart: fix use after free bug
     - can: vxcan: vxcan_xmit: fix use after free bug
     - can: peak_usb: fix use after free bugs
     - iio: common: st_sensors: fix possible infinite loop in
       st_sensors_irq_thread
     - iio: ad5504: Fix setting power-down state
     - drivers: iio: temperature: Add delay after the addressed reset command
       in mlx90632.c
     - [powerpc*] 64s: fix scv entry fallback flush vs interrupt
     - cifs: do not fail __smb_send_rqst if non-fatal signals are pending
     - [mips*] irqchip/mips-cpu: Set IPI domain parent chip
     - [x86] fpu: Add kernel_fpu_begin_mask() to selectively initialize state
     - [x86] topology: Make __max_die_per_package available unconditionally
     - [x86] mmx: Use KFPU_387 for MMX string operations
     - [x86] setup: don't remove E820_TYPE_RAM for pfn 0
     - proc_sysctl: fix oops caused by incorrect command parameters
     - mm: memcg/slab: optimize objcg stock draining
     - mm: memcg: fix memcg file_dirty numa stat
     - mm: fix numa stats for thp migration
     - io_uring: iopoll requests should also wake task ->in_idle state
     - io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
     - io_uring: fix short read retries for non-reg files
     - [x86] intel_th: pci: Add Alder Lake-P support
     - [arm64] serial: mvebu-uart: fix tx lost characters at power off
     - ehci: fix EHCI host controller initialization sequence
     - [armhf] usb: gadget: aspeed: fix stop dma register setting.
     - USB: gadget: dummy-hcd: Fix errors in port-reset handling
     - usb: udc: core: Use lock when write to soft_connect
     - xhci: make sure TRB is fully written before giving it to the controller
     - [arm64,armhf] xhci: tegra: Delay for disabling LFPS detector
     - drivers core: Free dma_range_map when driver probe failed
     - driver core: Fix device link device name collision
     - driver core: Extend device_is_dependent()
     - [x86] drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/
     - [x86] drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting
       YCbCr 4:4:4
     - [x86] entry: Fix noinstr fail
     - [x86] cpu/amd: Set __max_die_per_package on AMD
     - cls_flower: call nla_ok() before nla_next()
     - netfilter: rpfilter: mask ecn bits before fib lookup
     - [x86] drm/i915/hdcp: Update CP property in update_pipe
     - locking/lockdep: Cure noinstr fail
     - [x86] ASoC: SOF: Intel: fix page fault at probe if i915 init fails
     - [arm64,armhf] net: dsa: mv88e6xxx: also read STU state in
       mv88e6250_g1_vtu_getnext
     - nvme-pci: refactor nvme_unmap_data
     - nvme-pci: fix error unwind in nvme_map_data
     - cachefiles: Drop superfluous readpages aops NULL check
     - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
     - tcp: fix TCP socket rehash stats mis-accounting
     - net_sched: gen_estimator: support large ewma log
     - udp: mask TOS bits in udp_v4_early_demux()
     - ipv6: create multicast route with RTPROT_KERNEL
     - net_sched: avoid shift-out-of-bounds in tcindex_set_parms()
     - net_sched: reject silly cell_log in qdisc_get_rtab()
     - ipv6: set multicast flag on the multicast route
     - net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
     - [armhf] net: dsa: b53: fix an off by one in checking "vlan->vid"
     - tcp: do not mess with cloned skbs in tcp_add_backlog()
     - tcp: fix TCP_USER_TIMEOUT with zero window
     - net: core: devlink: use right genl user_ptr when handling port param
       get/set
     - [arm64] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not
       0
     - [arm64] pinctrl: qcom: No need to read-modify-write the interrupt status
     - [arm64] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when
       unmasking
     - [arm64] pinctrl: qcom: Don't clear pending interrupts when enabling
     - tty: implement write_iter
     - tty: fix up hung_up_tty_write() conversion
     - tcp: Fix potential use-after-free due to double kfree()
     - [x86] ASoC: SOF: Intel: hda: Avoid checking jack on system suspend
     - [x86] drm/i915/hdcp: Get conn while content_type changed
     - bpf: Local storage helpers should check nullness of owner ptr passed
     - kernfs: implement ->read_iter
     - kernfs: implement ->write_iter
     - kernfs: wire up ->splice_read and ->splice_write
     - fs/pipe: allow sendfile() to pipe again
     - mm: fix initialization of struct page for holes in memory layout
     - Revert "mm: fix initialization of struct page for holes in memory
       layout"
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.12
     - [arm*] gpio: mvebu: fix pwm .get_state period calculation
     - Revert "mm/slub: fix a memory leak in sysfs_slab_add()"
     - HID: wacom: Correct NULL dereference on AES pen proximity
     - HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices
     - media: Revert "media: videobuf2: Fix length check for single plane
       dmabuf queueing"
     - media: v4l2-subdev.h: BIT() is not available in userspace
     - RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC
     - iwlwifi: dbg: Don't touch the tlv data
     - kernel/io_uring: cancel io_uring before task works
     - io_uring: inline io_uring_attempt_task_drop()
     - io_uring: add warn_once for io_uring_flush()
     - io_uring: stop SQPOLL submit on creator's death
     - io_uring: fix null-deref in io_disable_sqo_submit
     - io_uring: do sqo disable on install_fd error
     - io_uring: fix false positive sqo warning on flush
     - io_uring: fix uring_flush in exit_files() warning
     - io_uring: fix skipping disabling sqo on exec
     - io_uring: dont kill fasync under completion_lock
     - io_uring: fix sleeping under spin in __io_clean_op
     - objtool: Don't fail on missing symbol table
     - mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
     - mm: fix a race on nr_swap_pages
     - tools: Factor HOSTCC, HOSTLD, HOSTAR definitions
     - printk: fix buffer overflow potential for print_text()
     - printk: fix string termination for record_print_text()
 .
   [ Salvatore Bonaccorso ]
   * Add set of PI futex fixes (CVE-2021-3347)
     - futex: Ensure the correct return value from futex_lock_pi()
     - futex: Replace pointless printk in fixup_owner()
     - futex: Provide and use pi_state_update_owner()
     - rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
     - futex: Use pi_state_update_owner() in put_pi_state()
     - futex: Simplify fixup_pi_state_owner()
     - futex: Handle faults correctly for PI futexes
   * Bump ABI to 3
   * xen: Fix XenStore initialisation for XS_LOCAL
   * [rt] Refresh "printk: refactor kmsg_dump_get_buffer()"
   * [rt] Refresh "locking/rtmutex: Handle the various new futex race
     conditions"
   * [rt] Refresh "locking/rtmutex: add sleeping lock implementation"
   * [rt] Refresh "crypto: limit more FPU-enabled sections"
   * Unset CRYPTO_USER_API_ENABLE_OBSOLETE
 .
   [ Ricardo Ribalda ]
   * Enable USB_NET_AQC111 as module (Closes: #968760)
 .
   [ Vincent Blut ]
   * [arm64] Enable DRM_VC4 again. (Closes: #968181, #968188)
   * [arm64] Enable DRM_VC4_HDMI_CEC. (Closes: #977438)
Checksums-Sha1:
 1c830bc39302e5a6bbd6f94ff2a804afb51db73e 195000 linux_5.10.12-1.dsc
 a9dc0896d6db7db1ac0583d4a8ec28e9b90364d8 121447500 linux_5.10.12.orig.tar.xz
 9147a2312c39aad80204e0589586b9a5c9288cf4 1305284 linux_5.10.12-1.debian.tar.xz
 ea9854fb89361857aebadb8ad2012facf3415ba0 6267 linux_5.10.12-1_source.buildinfo
Checksums-Sha256:
 59fd341dea562a1209250571de666f816672033d6537e828a8f8fceb7bcd850e 195000 linux_5.10.12-1.dsc
 4523190b887d5c7e00cd819eedd6ed195da768fb5b41c6259d6bf1f09902ea96 121447500 linux_5.10.12.orig.tar.xz
 a06e76c94d1b81af03623a04ed9960bd81adffd5e478e3576535b3b3d53d6b52 1305284 linux_5.10.12-1.debian.tar.xz
 0a3bdd420fc15be9240917d6272e0d069356001253d92961d9cab2925ba6368e 6267 linux_5.10.12-1_source.buildinfo
Files:
 336e2c77e8d165dd2c1c41adecf7de0a 195000 kernel optional linux_5.10.12-1.dsc
 93fd089053e0da9b2b91d52568e5cc99 121447500 kernel optional linux_5.10.12.orig.tar.xz
 86912a6cb3ba412d1fc45bd4a2927825 1305284 kernel optional linux_5.10.12-1.debian.tar.xz
 f7cb05c7023c9b5f30a976148e93dca6 6267 kernel optional linux_5.10.12-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=WalI
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: