Your message dated Sun, 27 Sep 2020 22:17:50 +0100 with message-id <5e1bd4c1272e079d268a5eb5eb0c7b45783cd4a1.camel@decadent.org.uk> and subject line Re: Bug#971059: linux-image-5.8.0-2-armmp-lpae: PCI invisible on Raspberry Pi 4B 8GB has caused the Debian Bug report #971059, regarding linux-image-5.8.0-2-armmp-lpae: PCI invisible on Raspberry Pi 4B 8GB to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 971059: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=971059 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.8.0-2-armmp-lpae: PCI invisible on Raspberry Pi 4B 8GB
- From: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
- Date: Sun, 27 Sep 2020 10:07:18 +0900
- Message-id: <[🔎] 160116883850.7629.8227814409994146339.reportbug@rpi4armhf-20200927>
Package: src:linux Version: 5.8.10-1 Severity: normal Dear Maintainer, I am reporting a similar symptom to https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968109 for a different kernel package (armmp-lpae). PCI peripherals of Raspberry Pi 4B (8GB model) are completely invisible. lspci shows nothing. As a result, USB is unusable. Best regards, Ryutaroh Matsumoto -- Package-specific info: ** Version: Linux version 5.8.0-2-armmp-lpae (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-8) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19) ** Command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait ** Tainted: CE (9216) * staging driver was loaded * unsigned module was loaded ** Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.8.0-2-armmp-lpae (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-8) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19) [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061312 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 1864704 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 21 pages/cpu s54220 r8192 d23604 u86016 [ 0.000000] pcpu-alloc: s54220 r8192 d23604 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059008 [ 0.000000] Kernel command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x23985000-0x27985000] (64MB) [ 0.000000] Memory: 7974884K/8245248K available (10240K kernel code, 1263K rwdata, 3228K rodata, 2048K init, 336K bss, 204828K reserved, 65536K cma-reserved, 7393280K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x48/0x570 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35987 entries in 71 pages [ 0.000000] ftrace: allocated 71 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000087] bcm2835: system timer (irq = 17) [ 0.002136] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.002154] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.002172] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.002187] Switching to timer-based delay loop, resolution 18ns [ 0.002577] Console: colour dummy device 80x30 [ 0.003135] printk: console [tty0] enabled [ 0.003190] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.003220] pid_max: default: 32768 minimum: 301 [ 0.003434] LSM: Security Framework initializing [ 0.003505] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003661] AppArmor: AppArmor initialized [ 0.003684] TOMOYO Linux initialized [ 0.003767] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003798] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004854] CPU: Testing write buffer coherency: ok [ 0.005184] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005790] Setting up static identity map for 0x400000 - 0x4000ac [ 0.006649] rcu: Hierarchical SRCU implementation. [ 0.009388] EFI services will not be available. [ 0.009801] smp: Bringing up secondary CPUs ... [ 0.010703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011666] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012542] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012669] smp: Brought up 1 node, 4 CPUs [ 0.012722] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.012741] CPU: All CPU(s) started in HYP mode. [ 0.012756] CPU: Virtualization extensions available. [ 0.013558] devtmpfs: initialized [ 0.021349] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.021854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.021934] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023859] pinctrl core: initialized pinctrl subsystem [ 0.024729] thermal_sys: Registered thermal governor 'fair_share' [ 0.024734] thermal_sys: Registered thermal governor 'step_wise' [ 0.025001] DMI not present or invalid. [ 0.025414] NET: Registered protocol family 16 [ 0.028067] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.028798] audit: initializing netlink subsys (disabled) [ 0.029027] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.030380] No ATAGs? [ 0.030529] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030553] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031551] Serial: AMBA PL011 UART driver [ 0.054327] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.134817] iommu: Default domain type: Translated [ 1.135520] vgaarb: loaded [ 1.136284] mc: Linux media interface: v0.10 [ 1.136333] videodev: Linux video capture interface: v2.00 [ 1.137583] NetLabel: Initializing [ 1.137602] NetLabel: domain hash size = 128 [ 1.137618] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.137701] NetLabel: unlabeled traffic allowed by default [ 1.138217] clocksource: Switched to clocksource arch_sys_counter [ 1.230187] VFS: Disk quotas dquot_6.6.0 [ 1.230323] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.231227] AppArmor: AppArmor Filesystem Enabled [ 1.231959] simple-framebuffer 3e29a000.framebuffer: framebuffer at 0x3e29a000, 0x960000 bytes, mapped to 0x(ptrval) [ 1.231991] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 1.255171] Console: switching to colour frame buffer device 240x80 [ 1.277790] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb registered! [ 1.287737] NET: Registered protocol family 2 [ 1.288484] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.288655] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.288868] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.289035] TCP: Hash tables configured (established 8192 bind 8192) [ 1.289276] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.289410] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.289695] NET: Registered protocol family 1 [ 1.289792] NET: Registered protocol family 44 [ 1.289877] PCI: CLS 0 bytes, default 64 [ 1.290362] Trying to unpack rootfs image as initramfs... [ 3.006881] Freeing initrd memory: 22996K [ 3.009022] Initialise system trusted keyrings [ 3.009165] Key type blacklist registered [ 3.009424] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [ 3.017301] zbud: loaded [ 3.018389] integrity: Platform Keyring initialized [ 3.018487] Key type asymmetric registered [ 3.018561] Asymmetric key parser 'x509' registered [ 3.018873] bounce: pool size: 64 pages [ 3.018985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.019365] io scheduler mq-deadline registered [ 3.034813] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.037244] printk: console [ttyS1] disabled [ 3.037402] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 33, base_baud = 33402922) is a 16550 [ 3.857414] printk: console [ttyS1] enabled [ 3.862711] Serial: AMBA driver [ 3.867145] STM32 USART driver initialized [ 3.872881] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.882224] libphy: Fixed MDIO Bus: probed [ 3.886962] mousedev: PS/2 mouse device common for all mice [ 3.897321] ledtrig-cpu: registered to indicate activity on CPUs [ 3.904139] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 3.911145] NET: Registered protocol family 10 [ 3.955781] Segment Routing with IPv6 [ 3.959787] mip6: Mobile IPv6 [ 3.962869] NET: Registered protocol family 17 [ 3.967624] mpls_gso: MPLS GSO support [ 3.971832] Registering SWP/SWPB emulation handler [ 3.976963] registered taskstats version 1 [ 3.981209] Loading compiled-in X.509 certificates [ 4.234156] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.243231] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 4.250491] zswap: loaded using pool lzo/zbud [ 4.255618] Key type ._fscrypt registered [ 4.259790] Key type .fscrypt registered [ 4.263866] Key type fscrypt-provisioning registered [ 4.269180] AppArmor: AppArmor sha1 policy hashing enabled [ 4.281476] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 31, base_baud = 0) is a PL011 rev2 [ 4.296512] serial serial0: tty port ttyAMA0 registered [ 4.310489] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01T13:23:40 [ 4.325649] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1500000000 [ 4.359099] Freeing unused kernel memory: 2048K [ 4.370154] Checked W+X mappings: passed, no W+X pages found [ 4.381747] Run /init as init process [ 4.391228] with arguments: [ 4.391236] /init [ 4.391243] with environment: [ 4.391250] HOME=/ [ 4.391256] TERM=linux [ 4.760682] sdhci: module verification failed: signature and/or required key missing - tainting kernel [ 4.770510] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 4.800331] sdhci: Secure Digital Host Controller Interface driver [ 4.813371] sdhci: Copyright(c) Pierre Ossman [ 4.832177] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.857143] usbcore: registered new interface driver usbfs [ 4.871314] usbcore: registered new interface driver hub [ 4.871338] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq [ 4.883562] usbcore: registered new device driver usb [ 4.922433] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO [ 4.948231] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 4.956953] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.961518] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 4.974682] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.983295] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 5.013078] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.028062] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.041355] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.082364] random: fast init done [ 5.087652] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 5.091733] mmc1: new ultra high speed DDR50 SDHC card at address 5048 [ 5.118639] mmcblk1: mmc1:5048 SD32G 28.9 GiB [ 5.131922] mmcblk1: p1 p2 p3 [ 5.172801] mmc0: new high speed SDIO card at address 0001 [ 5.386768] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.589062] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.942409] systemd[1]: System time before build time, advancing clock. [ 6.000755] systemd[1]: Inserted module 'autofs4' [ 6.050447] systemd[1]: systemd 246.6-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.085961] systemd[1]: Detected architecture arm. [ 6.139479] systemd[1]: Set hostname to <rpi4armhf-20200927>. [ 6.796863] systemd[1]: Queued start job for default target Graphical Interface. [ 6.811918] random: systemd: uninitialized urandom read (16 bytes read) [ 6.829846] systemd[1]: Created slice system-getty.slice. [ 6.858529] random: systemd: uninitialized urandom read (16 bytes read) [ 6.873069] systemd[1]: Created slice system-modprobe.slice. [ 6.902406] random: systemd: uninitialized urandom read (16 bytes read) [ 6.917039] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.948386] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.979872] systemd[1]: Created slice system-wpa_supplicant.slice. [ 7.011743] systemd[1]: Created slice User and Session Slice. [ 7.038728] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.070680] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.103337] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.138692] systemd[1]: Reached target Local Encrypted Volumes. [ 7.166547] systemd[1]: Reached target Paths. [ 7.190468] systemd[1]: Reached target Remote File Systems. [ 7.218413] systemd[1]: Reached target Slices. [ 7.243128] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.274687] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.303178] systemd[1]: Listening on Journal Audit Socket. [ 7.331044] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.359059] systemd[1]: Listening on Journal Socket. [ 7.387194] systemd[1]: Listening on Network Service Netlink Socket. [ 7.419119] systemd[1]: Listening on udev Control Socket. [ 7.446917] systemd[1]: Listening on udev Kernel Socket. [ 7.480169] systemd[1]: Mounting Huge Pages File System... [ 7.512089] systemd[1]: Mounting POSIX Message Queue File System... [ 7.548292] systemd[1]: Mounting Kernel Debug File System... [ 7.580883] systemd[1]: Mounting Kernel Trace File System... [ 7.616739] systemd[1]: Starting Set the console keyboard layout... [ 7.652889] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.692438] systemd[1]: Starting Load Kernel Module drm... [ 7.728445] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.744263] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.775574] systemd[1]: Starting Journal Service... [ 7.811288] systemd[1]: Starting Load Kernel Modules... [ 7.837084] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.873130] systemd[1]: Starting Coldplug All udev Devices... [ 7.911675] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard [ 7.915788] systemd[1]: Mounted Huge Pages File System. [ 7.955686] systemd[1]: Mounted POSIX Message Queue File System. [ 7.987123] systemd[1]: Mounted Kernel Debug File System. [ 8.015243] systemd[1]: Mounted Kernel Trace File System. [ 8.045959] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.080365] systemd[1]: modprobe@drm.service: Succeeded. [ 8.095114] systemd[1]: Finished Load Kernel Module drm. [ 8.126873] systemd[1]: Finished Load Kernel Modules. [ 8.155116] systemd[1]: Started Journal Service. [ 9.208658] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.241163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 9.319126] iproc-rng200 fe104000.rng: hwrng registered [ 9.530324] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.546497] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 9.561049] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 9.575604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.594132] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 9.609185] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 9.668003] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.670178] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.705988] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.738620] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.753179] usbcore: registered new interface driver brcmfmac [ 9.757489] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 9.785343] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 9.803421] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt [ 9.862245] random: crng init done [ 9.868707] random: 7 urandom warning(s) missed due to ratelimiting [ 9.933685] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.947554] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 9.959528] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 9.972413] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 9.993011] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 10.028888] Adding 10485756k swap on /dev/mmcblk1p3. Priority:-2 extents:1 across:10485756k SSDscFS [ 10.048805] Bluetooth: Core ver 2.22 [ 10.056067] NET: Registered protocol family 31 [ 10.063832] Bluetooth: HCI device and connection manager initialized [ 10.074078] Bluetooth: HCI socket layer initialized [ 10.082413] Bluetooth: L2CAP socket layer initialized [ 10.091160] Bluetooth: SCO socket layer initialized [ 10.682009] audit: type=1400 audit(1600712920.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=394 comm="apparmor_parser" [ 10.701969] audit: type=1400 audit(1600712920.735:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=395 comm="apparmor_parser" [ 10.720704] audit: type=1400 audit(1600712920.735:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=395 comm="apparmor_parser" [ 16.641578] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 260.046099] audit: type=1400 audit(1601167761.953:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=7330 comm="apparmor_parser" [ 260.061617] audit: type=1400 audit(1601167761.957:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=7330 comm="apparmor_parser" [ 260.076954] audit: type=1400 audit(1601167761.957:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=7330 comm="apparmor_parser" ** Model information Hardware : BCM2711 Revision : 0000 Device Tree model: Raspberry Pi 4 Model B Rev 1.4 ** Loaded modules: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btsdio(E) bluetooth(E) jitterentropy_rng(E) drbg(E) ansi_cprng(E) ecdh_generic(E) ecc(E) snd_bcm2835(CE) bcm2835_v4l2(CE) brcmfmac(E) videobuf2_vmalloc(E) snd_pcm(E) videobuf2_memops(E) videobuf2_v4l2(E) snd_timer(E) brcmutil(E) videobuf2_common(E) snd(E) soundcore(E) cpufreq_dt(E) cfg80211(E) rfkill(E) raspberrypi_cpufreq(E) iproc_rng200(E) rng_core(E) vchiq(CE) pwm_bcm2835(E) bcm2835_wdt(E) leds_gpio(E) drm(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) dwc2(E) udc_core(E) sdhci_iproc(E) usbcore(E) sdhci_pltfm(E) i2c_bcm2835(E) gpio_regulator(E) phy_generic(E) sdhci(E) ** Network status: *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 14263222 12262 0 0 0 0 0 6 845293 6144 0 0 0 0 0 0 ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 5.8.0-2-armmp-lpae (SMP w/4 CPU threads) Kernel taint flags: TAINT_CRAP, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.8.0-2-armmp-lpae depends on: ii initramfs-tools [linux-initramfs-tool] 0.139 ii kmod 27+20200310-2 ii linux-base 4.6 Versions of packages linux-image-5.8.0-2-armmp-lpae recommends: ii apparmor 2.13.4-3 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.8.0-2-armmp-lpae suggests: pn debian-kernel-handbook <none> pn linux-doc-5.8 <none> Versions of packages linux-image-5.8.0-2-armmp-lpae is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20200817-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20200817-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 971059-done@bugs.debian.org
- Subject: Re: Bug#971059: linux-image-5.8.0-2-armmp-lpae: PCI invisible on Raspberry Pi 4B 8GB
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 27 Sep 2020 22:17:50 +0100
- Message-id: <5e1bd4c1272e079d268a5eb5eb0c7b45783cd4a1.camel@decadent.org.uk>
- In-reply-to: <[🔎] 160116883850.7629.8227814409994146339.reportbug@rpi4armhf-20200927>
- References: <[🔎] 160116883850.7629.8227814409994146339.reportbug@rpi4armhf-20200927>
On Sun, 2020-09-27 at 10:07 +0900, Ryutaroh Matsumoto wrote: > Package: src:linux > Version: 5.8.10-1 > Severity: normal > > Dear Maintainer, > > I am reporting a similar symptom to > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968109 > for a different kernel package (armmp-lpae). > > PCI peripherals of Raspberry Pi 4B (8GB model) are completely > invisible. lspci shows nothing. > As a result, USB is unusable. [...] Not a bug. We don't support armhf kernels on 64-bit capable Arm systems. Ben. -- Ben Hutchings Klipstein's 4th Law of Prototyping and Production: A fail-safe circuit will destroy others.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---