Bug#966703: linux-image-4.19.0-10-amd64: kworker process with permanent high CPU load
Package:
src:linux
Version: 4.19.132-1
Severity: normal
Dear Maintainer,
after booting the kernel 4.19.0-10-amd64, there is a kworker
process running with a permanent high CPU load of almost 90% as
reported by the "top" command:
$ top
top - 09:48:19 up 0 min, 4 users, load average: 1.91, 0.58,
0.20
Tasks: 218 total, 2 running, 216 sleeping, 0 stopped, 0
zombie
%Cpu(s): 0.8 us, 12.4 sy, 0.0 ni, 84.5 id, 0.0 wa, 0.0 hi,
2.3 si, 0.0 st
MiB Mem : 15889.4 total, 14173.1 free, 889.3 used, 827.0
buff/cache
MiB Swap: 0.0 total, 0.0 free, 0.0 used. 14677.7
avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM
TIME+ COMMAND
64 root 20 0 0 0 0 R 86.7 0.0
0:47.41 kworker/0:2+pm
9 root 20 0 0 0 0 S 20.0 0.0
0:08.84 ksoftirqd/0
364 root -51 0 0 0 0 S 6.7 0.0
0:00.50 irq/126-nvidia
1177 dirk 20 0 2921696 122848 94268 S 6.7 0.8
0:02.23 kwin_x11
1 root 20 0 169652 10280 7740 S 0.0 0.1
0:01.56 systemd
2 root 20 0 0 0 0 S 0.0 0.0
0:00.00 kthreadd
...
The expected
result after booting the kernel 4.19.0-10-amd64 is a kworker
process with a CPU load close to 0%.
As a control,
booting the previous kernel 4.19.0-9-amd64 does not show a high
CPU load for the kworker process. Instead, the kworker CPU load
reported by the "top" command is 0.0%.
Therefore, I
suspect a bug in the kernel 4.19.0-10-amd64.
Neither "dmesg" nor "journalctl -b" show any messages containing
"kworker".
I am using Debian/GNU
Linux 10.5 with kernel 4.19.0-10-amd64 and libc6:amd64 2.28-10.
If you need more information, I would be happy to provide it.
Cheers,
Dirk.
-- Package-specific info:
** Version:
Linux version 4.19.0-10-amd64 (debian-kernel@lists.debian.org)
(gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.132-1
(2020-07-24)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64
root=UUID=7eb1c27f-5474-41cb-a4fc-de2944149287 ro quiet
** Tainted: PWOE (12801)
* Proprietary module has been loaded.
* Taint on warning.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
Unable to read kernel log; any relevant messages should be
attached
** Model information
sys_vendor: Dell Inc.
product_name: Precision 5510
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.13.1
board_vendor: Dell Inc.
board_name: 0N8J4R
board_version: A00
** Loaded modules:
rfcomm
ctr
ccm
cmac
bnep
snd_hda_codec_hdmi
arc4
intel_rapl
dell_rbtn
iwlmvm
nls_ascii
nls_cp437
vfat
fat
snd_hda_codec_realtek
x86_pkg_temp_thermal
fuse
intel_powerclamp
mac80211
snd_hda_codec_generic
coretemp
mei_wdt
btusb
btrtl
btbcm
kvm_intel
btintel
dell_laptop
dell_wmi
bluetooth
kvm
iwlwifi
dell_smbios
snd_hda_intel
irqbypass
dcdbas
crct10dif_pclmul
crc32_pclmul
snd_hda_codec
sg
dell_smm_hwmon
hid_multitouch
joydev
wmi_bmof
dell_wmi_descriptor
ghash_clmulni_intel
drbg
snd_hda_core
serio_raw
cfg80211
ansi_cprng
intel_cstate
snd_hwdep
efi_pstore
snd_pcm
snd_timer
ecdh_generic
intel_uncore
snd
rtsx_pci_ms
mei_me
nvidia_drm(POE)
iTCO_wdt
memstick
intel_rapl_perf
rfkill
efivars
pcspkr
soundcore
idma64
pcc_cpufreq
iTCO_vendor_support
mei
intel_pch_thermal
nvidia_modeset(POE)
processor_thermal_device
tpm_tis
intel_soc_dts_iosf
tpm_tis_core
tpm
battery
rng_core
int3403_thermal
intel_hid
dell_smo8800
evdev
int3400_thermal
int3402_thermal
acpi_thermal_rel
sparse_keymap
int340x_thermal_zone
acpi_pad
ac
nvidia(POE)
ipmi_devintf
ipmi_msghandler
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
usbhid
hid_generic
sd_mod
i915
crc32c_intel
i2c_designware_platform
i2c_designware_core
rtsx_pci_sdmmc
xhci_pci
i2c_algo_bit
mmc_core
xhci_hcd
drm_kms_helper
ahci
libahci
libata
aesni_intel
drm
mxm_wmi
aes_x86_64
psmouse
usbcore
i2c_i801
crypto_simd
scsi_mod
cryptd
glue_helper
i2c_hid
rtsx_pci
intel_lpss_pci
hid
intel_lpss
mfd_core
usb_common
thermal
fan
video
wmi
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host
Bridge/DRAM Registers [8086:1910] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core
Processor Host Bridge/DRAM Registers [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe
Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation HD
Graphics 530 [8086:191b] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell HD Graphics 530 [1028:06e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at db000000 (64-bit, non-prefetchable)
[size=16M]
Region 2: Memory at 70000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation
Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core
Processor Thermal Subsystem [1028:06e5]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ddc20000 (64-bit, non-prefetchable)
[size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H
USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0
xHCI Controller [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at ddc10000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation
Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal
Subsystem [1028:06e5]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ddc38000 (64-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation
Sunrise Point-H Serial IO I2C Controller #0 [8086:a160] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO
I2C Controller [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ddc37000 (64-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation
Sunrise Point-H Serial IO I2C Controller #1 [8086:a161] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO
I2C Controller [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ddc36000 (64-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation
Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family MEI
Controller [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at ddc35000 (64-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 RAID bus controller [0104]: Intel Corporation SATA
Controller [RAID mode] [8086:2822] (rev 31)
Subsystem: Dell SATA Controller [RAID mode] [1028:06e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at ddc30000 (32-bit, non-prefetchable)
[size=8K]
Region 1: Memory at ddc34000 (32-bit, non-prefetchable)
[size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at ddc33000 (32-bit, non-prefetchable)
[size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI
Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ddb00000-ddbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI
Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dd100000-ddafffff
Prefetchable memory behind bridge: 00000000c2100000-00000000c2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI
Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI
Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI
Express Root Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC
Controller [8086:a150] (rev 31)
Subsystem: Dell CM236 Chipset LPC/eSPI Controller [1028:06e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise
Point-H PMC [8086:a121] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Power
Management Controller [1028:06e5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ddc2c000 (32-bit, non-prefetchable)
[disabled] [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H
HD Audio [8086:a170] (rev 31) (prog-if 80)
Subsystem: Dell 100 Series/C230 Series Chipset Family HD Audio
Controller [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 129
Region 0: Memory at ddc28000 (64-bit, non-prefetchable)
[size=16K]
Region 4: Memory at ddc00000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus
[8086:a123] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus
[1028:06e5]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ddc32000 (64-bit, non-prefetchable)
[size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GM107GLM
[Quadro M1000M] [10de:13b1] (rev a2)
Subsystem: Dell GM107GLM [Quadro M1000M] [1028:06e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at dc000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at dd000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
02:00.0 Network controller [0280]: Intel Corporation Wireless
8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:0050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 0: Memory at ddb00000 (64-bit, non-prefetchable)
[size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:06e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 1: Memory at dd100000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 1e7d:2d60 ROCCAT
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-10-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_WARN,
TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8),
LANGUAGE= (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-10-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-10-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-10-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20+deb10u2
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-10-amd64 is related to:
ii firmware-amd-graphics 20190717-2~bpo10+1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190114-2
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2~bpo10+1
ii firmware-misc-nonfree 20190717-2~bpo10+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: