Bug#961061: linux-image-4.19.0-9-amd64: "xset s activate" doesn't work properly with i965 & 4.19 but works with 4.09
Package: src:linux
Version: 4.19.118-2
Severity: normal
Dear Maintainer,
I start the X using the xinit command then I try "xset s activate". The screen
is switched off immediatelly as expected. But it doesn't switch itself on
again when I move the mouse nor type to the keyboard nor type the
"xset s clear" command. I can switch to the virtual console and back to the X
to enable display again. Or I can wait for 15 minutes then move the mouse and
the display switch itself on. Any subsequent "xset s activate" does nothing in this case.
I can use "xset s 10" instead of "xset s activate" - the result is the same
except of 10 seconds delay before switching the display off. The 15 minutes
interval remains.
If I boot the same system with the 4.9 kernel remaining here from the Stretch
instalation, all works normally. Comparing Xorg.0.org from both kernels, they
seems identical, except there are some modeline dups in the 4.19 version.
Regards,
Petr Mikše
-- Package-specific info:
** Version:
Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2 (2020-04-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=242a9edc-9516-44e7-8388-d978b498231d ro net.ifnames=0 biosdevname=0 quiet
** Not tainted
** Kernel log:
[ 4.931556] usb 1-2.2.4: Manufacturer: Logitech
[ 4.955676] parport_pc 00:03: reported by Plug and Play ACPI
[ 4.955772] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[ 4.990169] iTCO_vendor_support: vendor-support=0
[ 4.990782] EFI Variables Facility v0.08 2004-May-17
[ 4.993278] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.998477] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.998561] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 4.998752] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.016252] pstore: Using compression: deflate
[ 5.021705] pstore: Registered efi as persistent store backend
[ 5.054820] Bluetooth: Core ver 2.22
[ 5.054852] NET: Registered protocol family 31
[ 5.054853] Bluetooth: HCI device and connection manager initialized
[ 5.054859] Bluetooth: HCI socket layer initialized
[ 5.054863] Bluetooth: L2CAP socket layer initialized
[ 5.054874] Bluetooth: SCO socket layer initialized
[ 5.111263] Bluetooth: HCI UART driver ver 2.3
[ 5.111266] Bluetooth: HCI UART protocol H4 registered
[ 5.111268] Bluetooth: HCI UART protocol BCSP registered
[ 5.111301] Bluetooth: HCI UART protocol LL registered
[ 5.111302] Bluetooth: HCI UART protocol ATH3K registered
[ 5.111322] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.111359] Bluetooth: HCI UART protocol Intel registered
[ 5.111398] Bluetooth: HCI UART protocol Broadcom registered
[ 5.111413] Bluetooth: HCI UART protocol QCA registered
[ 5.111414] Bluetooth: HCI UART protocol AG6XX registered
[ 5.111415] Bluetooth: HCI UART protocol Marvell registered
[ 5.120773] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.121824] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 5.173006] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.189285] ppdev: user-space parallel port driver
[ 5.221546] usbcore: registered new interface driver usbhid
[ 5.221549] usbhid: USB HID core driver
[ 5.292773] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 5.292778] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 5.292781] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.292783] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.292785] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 5.292786] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.292790] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.292792] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.292794] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 5.318016] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:046D:C534.0001/input/input4
[ 5.378660] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2.2.4/input0
[ 5.379102] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input8
[ 5.387759] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input9
[ 5.394169] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 5.445406] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input10
[ 5.448403] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.448537] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2.2.4/input1
[ 5.448683] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.448790] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.479535] intel_rapl: Found RAPL domain package
[ 5.479538] intel_rapl: Found RAPL domain core
[ 5.591371] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 >
[ 5.594225] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 5.877334] scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[ 5.878217] sd 3:0:0:0: [sdc] 7884800 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 5.878343] sd 3:0:0:0: [sdc] Write Protect is off
[ 5.878346] sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 5.878379] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.878470] sd 3:0:0:0: [sdc] No Caching mode page found
[ 5.878537] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 5.904008] audit: type=1400 audit(1589907756.940:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=409 comm="apparmor_parser"
[ 5.904908] audit: type=1400 audit(1589907756.940:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=408 comm="apparmor_parser"
[ 5.904918] audit: type=1400 audit(1589907756.940:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=408 comm="apparmor_parser"
[ 5.904924] audit: type=1400 audit(1589907756.940:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=408 comm="apparmor_parser"
[ 5.909453] audit: type=1400 audit(1589907756.948:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=413 comm="apparmor_parser"
[ 5.909463] audit: type=1400 audit(1589907756.948:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=413 comm="apparmor_parser"
[ 5.913603] audit: type=1400 audit(1589907756.952:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=410 comm="apparmor_parser"
[ 5.913611] audit: type=1400 audit(1589907756.952:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=410 comm="apparmor_parser"
[ 5.916444] audit: type=1400 audit(1589907756.952:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=414 comm="apparmor_parser"
[ 5.917592] scsi 2:0:0:0: Direct-Access Samsung M2 Portable 2AR1 PQ: 0 ANSI: 2 CCS
[ 5.917730] audit: type=1400 audit(1589907756.956:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=415 comm="apparmor_parser"
[ 5.918421] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 5.921080] sd 2:0:0:0: [sdd] 1953524736 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.921379] sd 2:0:0:0: [sdd] Write Protect is off
[ 5.921382] sd 2:0:0:0: [sdd] Mode Sense: 28 00 00 00
[ 5.921681] sd 2:0:0:0: [sdd] No Caching mode page found
[ 5.921754] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 5.936019] sdc: sdc1 sdc2
[ 5.937089] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 6.305149] sdd: sdd1
[ 6.306514] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 6.830088] NET: Registered protocol family 3
[ 6.844804] NET: Registered protocol family 5
[ 12.049308] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 12.049558] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 12.183143] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 288.011078] usb 1-3: USB disconnect, device number 5
[ 288.317281] usb 1-3: new high-speed USB device number 9 using xhci_hcd
[ 288.466702] usb 1-3: New USB device found, idVendor=2916, idProduct=9024, bcdDevice= 2.28
[ 288.466709] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 288.466713] usb 1-3: Product: Android
[ 288.466716] usb 1-3: Manufacturer: Android
[ 288.466719] usb 1-3: SerialNumber: 5ac7cf2b
[ 288.500433] usbcore: registered new interface driver cdc_ether
[ 288.507695] rndis_host 1-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, 92:b1:96:dc:c4:6d
[ 288.507761] usbcore: registered new interface driver rndis_host
** Model information
sys_vendor: MiTAC
product_name: PD10BI
product_version: Default string
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: D7360A14
board_vendor: MiTAC
board_name: PD10BI
board_version: PD10BI-772
** Loaded modules:
rndis_host
cdc_ether
usbnet
mii
appletalk
psnap
llc
ax25
nls_ascii
nls_cp437
vfat
fat
joydev
intel_rapl
intel_soc_dts_thermal
intel_soc_dts_iosf
intel_powerclamp
kvm_intel
snd_hda_codec_hdmi
kvm
hid_generic
snd_hda_codec_realtek
snd_hda_codec_generic
irqbypass
usbhid
crct10dif_pclmul
crc32_pclmul
ppdev
snd_hda_intel
snd_hda_codec
hci_uart
sg
snd_hda_core
btqca
btrtl
btbcm
btintel
snd_hwdep
bluetooth
snd_pcm
ghash_clmulni_intel
snd_timer
intel_cstate
efi_pstore
snd
iTCO_wdt
pcspkr
efivars
iTCO_vendor_support
soundcore
parport_pc
parport
drbg
ansi_cprng
uas
ecdh_generic
pcc_cpufreq
rfkill
evdev
usb_storage
pwm_lpss_platform
pwm_lpss
nct6683
coretemp
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
sd_mod
i915
xhci_pci
i2c_algo_bit
ahci
xhci_hcd
drm_kms_helper
libahci
libata
r8169
crc32c_intel
drm
usbcore
scsi_mod
i2c_i801
realtek
usb_common
libphy
lpc_ich
mfd_core
video
i2c_hid
hid
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 11)
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [1071:0736]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 11) (prog-if 00 [VGA controller])
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx Series Graphics & Display [1071:0736]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 90
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at f080 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0])
Subsystem: Mitac Atom Processor E3800 Series SATA AHCI Controller [1071:0736]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 88
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at d0715000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [1071:0736]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 89
Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [1071:0736]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at d0400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [1071:0736]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 91
Region 0: Memory at d0710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 [8086:0f48] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 [8086:0f4a] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 [8086:0f4e] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: Mitac Atom Processor Z36xxx/Z37xxx Series Power Control Unit [1071:0736]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus Controller [8086:0f12] (rev 0e)
Subsystem: Mitac Atom Processor E3800 Series SMBus Controller [1071:0736]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0714000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at f000 [size=32]
Capabilities: <access denied>
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Mitac RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1071:0736]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0600000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 002 Device 003: ID 0bc2:61b5 Seagate RSS LLC
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 2916:9024
Bus 001 Device 007: ID abcd:1234 Unknown
Bus 001 Device 008: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 006: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 004: ID 04e8:60b6 Samsung Electronics Co., Ltd
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-9-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-9-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-9-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-9-amd64 is related to:
ii firmware-amd-graphics 20190114-2
ii firmware-atheros 20190114-2
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
ii firmware-intel-sound 20190114-2
pn firmware-intelwimax <none>
ii firmware-ipw2x00 20190114-2
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190114-2
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190114-2
pn firmware-samsung <none>
pn firmware-siano <none>
ii firmware-ti-connectivity 20190114-2
pn xen-hypervisor <none>
-- no debconf information
Xorg.0.log:
[ 8.115]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 8.115] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 8.115] Current Operating System: Linux EWA8097 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2 (2020-04-29) x86_64
[ 8.116] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=242a9edc-9516-44e7-8388-d978b498231d ro net.ifnames=0 biosdevname=0 quiet
[ 8.116] Build Date: 05 March 2019 08:11:12PM
[ 8.116] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 8.116] Current version of pixman: 0.36.0
[ 8.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.118] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 19 19:02:39 2020
[ 8.123] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.125] (==) No Layout section. Using the first Screen section.
[ 8.125] (==) No screen section available. Using defaults.
[ 8.125] (**) |-->Screen "Default Screen Section" (0)
[ 8.125] (**) | |-->Monitor "<default monitor>"
[ 8.127] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.127] (==) Automatically adding devices
[ 8.127] (==) Automatically enabling devices
[ 8.127] (==) Automatically adding GPU devices
[ 8.127] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.130] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.130] Entry deleted from font path.
[ 8.132] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 8.132] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.132] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.133] (II) Loader magic: 0x5653b5fc8e20
[ 8.133] (II) Module ABI versions:
[ 8.133] X.Org ANSI C Emulation: 0.4
[ 8.133] X.Org Video Driver: 24.0
[ 8.133] X.Org XInput driver : 24.1
[ 8.133] X.Org Server Extension : 10.0
[ 8.135] (--) using VT number 2
[ 8.135] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.137] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.155] (--) PCI:*(0@0:2:0) 8086:0f31:1071:0736 rev 17, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8, BIOS @ 0x????????/131072
[ 8.155] (II) LoadModule: "glx"
[ 8.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.169] (II) Module glx: vendor="X.Org Foundation"
[ 8.169] compiled for 1.20.4, module version = 1.0.0
[ 8.169] ABI class: X.Org Server Extension, version 10.0
[ 8.169] (==) Matched modesetting as autoconfigured driver 0
[ 8.169] (==) Matched fbdev as autoconfigured driver 1
[ 8.169] (==) Matched vesa as autoconfigured driver 2
[ 8.169] (==) Assigned the driver to the xf86ConfigLayout
[ 8.169] (II) LoadModule: "modesetting"
[ 8.169] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.171] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.171] compiled for 1.20.4, module version = 1.20.4
[ 8.171] Module class: X.Org Video Driver
[ 8.171] ABI class: X.Org Video Driver, version 24.0
[ 8.171] (II) LoadModule: "fbdev"
[ 8.171] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.172] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.172] compiled for 1.20.0, module version = 0.5.0
[ 8.172] Module class: X.Org Video Driver
[ 8.172] ABI class: X.Org Video Driver, version 24.0
[ 8.172] (II) LoadModule: "vesa"
[ 8.172] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.173] (II) Module vesa: vendor="X.Org Foundation"
[ 8.173] compiled for 1.20.1, module version = 2.4.0
[ 8.173] Module class: X.Org Video Driver
[ 8.173] ABI class: X.Org Video Driver, version 24.0
[ 8.173] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.173] (II) FBDEV: driver for framebuffer: fbdev
[ 8.173] (II) VESA: driver for VESA chipsets: vesa
[ 8.197] (II) modeset(0): using drv /dev/dri/card0
[ 8.197] (WW) Falling back to old probe method for fbdev
[ 8.197] (II) Loading sub module "fbdevhw"
[ 8.197] (II) LoadModule: "fbdevhw"
[ 8.197] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.198] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.198] compiled for 1.20.4, module version = 0.0.2
[ 8.198] ABI class: X.Org Video Driver, version 24.0
[ 8.199] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.199] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 8.199] (==) modeset(0): RGB weight 888
[ 8.199] (==) modeset(0): Default visual is TrueColor
[ 8.199] (II) Loading sub module "glamoregl"
[ 8.199] (II) LoadModule: "glamoregl"
[ 8.199] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.221] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.221] compiled for 1.20.4, module version = 1.0.1
[ 8.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.338] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Bay Trail
[ 8.338] (II) modeset(0): glamor initialized
[ 8.346] (II) modeset(0): Output VGA-1 has no monitor section
[ 8.347] (II) modeset(0): Output HDMI-1 has no monitor section
[ 8.426] (II) modeset(0): Output DP-1 has no monitor section
[ 8.453] (II) modeset(0): Output HDMI-2 has no monitor section
[ 8.461] (II) modeset(0): EDID for output VGA-1
[ 8.463] (II) modeset(0): EDID for output HDMI-1
[ 8.541] (II) modeset(0): EDID for output DP-1
[ 8.569] (II) Quirked EDID physical size to 0x0 cm
[ 8.569] (II) modeset(0): EDID for output HDMI-2
[ 8.569] (II) modeset(0): Manufacturer: SAM Model: 3f2 Serial#: 0
[ 8.569] (II) modeset(0): Year: 2009 Week: 6
[ 8.569] (II) modeset(0): EDID Version: 1.3
[ 8.569] (II) modeset(0): Digital Display Input
[ 8.569] (II) modeset(0): Indeterminate output size
[ 8.569] (II) modeset(0): Gamma: 2.20
[ 8.569] (II) modeset(0): No DPMS capabilities specified
[ 8.569] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 8.569] (II) modeset(0): First detailed timing is preferred mode
[ 8.569] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 8.569] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 8.569] (II) modeset(0): Supported established timings:
[ 8.569] (II) modeset(0): 720x400@70Hz
[ 8.569] (II) modeset(0): 640x480@60Hz
[ 8.570] (II) modeset(0): 640x480@67Hz
[ 8.570] (II) modeset(0): 640x480@72Hz
[ 8.570] (II) modeset(0): 640x480@75Hz
[ 8.570] (II) modeset(0): 800x600@56Hz
[ 8.570] (II) modeset(0): 800x600@60Hz
[ 8.570] (II) modeset(0): 800x600@72Hz
[ 8.570] (II) modeset(0): 800x600@75Hz
[ 8.570] (II) modeset(0): 832x624@75Hz
[ 8.570] (II) modeset(0): 1024x768@60Hz
[ 8.570] (II) modeset(0): 1024x768@70Hz
[ 8.570] (II) modeset(0): 1024x768@75Hz
[ 8.570] (II) modeset(0): 1280x1024@75Hz
[ 8.570] (II) modeset(0): 1152x864@75Hz
[ 8.570] (II) modeset(0): Manufacturer's mask: 0
[ 8.570] (II) modeset(0): Supported standard timings:
[ 8.570] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 8.570] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 8.570] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 8.570] (II) modeset(0): Supported detailed timing:
[ 8.570] (II) modeset(0): clock: 146.2 MHz Image Size: 160 x 90 mm
[ 8.570] (II) modeset(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 8.570] (II) modeset(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 8.570] (II) modeset(0): Supported detailed timing:
[ 8.570] (II) modeset(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 8.570] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 8.570] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 8.570] (II) modeset(0): Ranges: V min: 24 V max: 75 Hz, H min: 26 H max: 81 kHz, PixClock max 235 MHz
[ 8.570] (II) modeset(0): Monitor name: SyncMaster
[ 8.570] (II) modeset(0): Supported detailed timing:
[ 8.570] (II) modeset(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 8.570] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 8.570] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 8.571] (II) modeset(0): Supported detailed timing:
[ 8.571] (II) modeset(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 8.571] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 8.571] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 8.571] (II) modeset(0): Supported detailed timing:
[ 8.571] (II) modeset(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 8.571] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 8.571] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 8.571] (II) modeset(0): Supported detailed timing:
[ 8.571] (II) modeset(0): clock: 27.0 MHz Image Size: 160 x 90 mm
[ 8.571] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 8.571] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 8.571] (II) modeset(0): Number of EDID sections to follow: 1
[ 8.571] (II) modeset(0): EDID (in hex):
[ 8.571] (II) modeset(0): 00ffffffffffff004c2df20300000000
[ 8.571] (II) modeset(0): 06130103801009780aee91a3544c9926
[ 8.571] (II) modeset(0): 0f5054bfef80714f8140818001010101
[ 8.571] (II) modeset(0): 01010101010121399030621a274068b0
[ 8.571] (II) modeset(0): 3600a05a0000001c011d00bc52d01e20
[ 8.571] (II) modeset(0): b8285540a05a0000001e000000fd0018
[ 8.571] (II) modeset(0): 4b1a5117000a202020202020000000fc
[ 8.571] (II) modeset(0): 0053796e634d61737465720a2020014e
[ 8.571] (II) modeset(0): 020323f14b930405140312101f202122
[ 8.571] (II) modeset(0): 2309070783010000e2000f67030c0010
[ 8.571] (II) modeset(0): 00b82d011d80d0721c1620102c2580a0
[ 8.571] (II) modeset(0): 5a0000009e011d8018711c1620582c25
[ 8.571] (II) modeset(0): 00a05a0000009e011d007251d01e206e
[ 8.571] (II) modeset(0): 285500a05a0000001e8c0ad090204031
[ 8.571] (II) modeset(0): 200c405500a05a000000180000000000
[ 8.572] (II) modeset(0): 0000000000000000000000000000007a
[ 8.572] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 8.572] (II) modeset(0): Printing probed modes for output HDMI-2
[ 8.572] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[ 8.572] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 8.572] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.573] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.573] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.573] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.573] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.573] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.573] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 8.573] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 8.573] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.573] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8.573] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.573] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.574] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.574] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8.574] (II) modeset(0): Output VGA-1 disconnected
[ 8.574] (II) modeset(0): Output HDMI-1 disconnected
[ 8.574] (II) modeset(0): Output DP-1 disconnected
[ 8.574] (II) modeset(0): Output HDMI-2 connected
[ 8.574] (II) modeset(0): Using exact sizes for initial modes
[ 8.574] (II) modeset(0): Output HDMI-2 using initial mode 1680x1050 +0+0
[ 8.574] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.574] (==) modeset(0): DPI set to (96, 96)
[ 8.574] (II) Loading sub module "fb"
[ 8.574] (II) LoadModule: "fb"
[ 8.575] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.576] (II) Module fb: vendor="X.Org Foundation"
[ 8.576] compiled for 1.20.4, module version = 1.0.0
[ 8.576] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.576] (II) UnloadModule: "fbdev"
[ 8.576] (II) Unloading fbdev
[ 8.576] (II) UnloadSubModule: "fbdevhw"
[ 8.576] (II) Unloading fbdevhw
[ 8.576] (II) UnloadModule: "vesa"
[ 8.576] (II) Unloading vesa
[ 8.755] (==) modeset(0): Backing store enabled
[ 8.755] (==) modeset(0): Silken mouse enabled
[ 8.831] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 8.831] (==) modeset(0): DPMS enabled
[ 8.833] (II) modeset(0): [DRI2] Setup complete
[ 8.833] (II) modeset(0): [DRI2] DRI driver: i965
[ 8.833] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 8.833] (II) Initializing extension Generic Event Extension
[ 8.833] (II) Initializing extension SHAPE
[ 8.833] (II) Initializing extension MIT-SHM
[ 8.834] (II) Initializing extension XInputExtension
[ 8.835] (II) Initializing extension XTEST
[ 8.835] (II) Initializing extension BIG-REQUESTS
[ 8.835] (II) Initializing extension SYNC
[ 8.836] (II) Initializing extension XKEYBOARD
[ 8.836] (II) Initializing extension XC-MISC
[ 8.836] (II) Initializing extension SECURITY
[ 8.837] (II) Initializing extension XFIXES
[ 8.837] (II) Initializing extension RENDER
[ 8.837] (II) Initializing extension RANDR
[ 8.838] (II) Initializing extension COMPOSITE
[ 8.838] (II) Initializing extension DAMAGE
[ 8.839] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.839] (II) Initializing extension DOUBLE-BUFFER
[ 8.839] (II) Initializing extension RECORD
[ 8.840] (II) Initializing extension DPMS
[ 8.840] (II) Initializing extension Present
[ 8.840] (II) Initializing extension DRI3
[ 8.841] (II) Initializing extension X-Resource
[ 8.841] (II) Initializing extension XVideo
[ 8.841] (II) Initializing extension XVideo-MotionCompensation
[ 8.841] (II) Initializing extension SELinux
[ 8.841] (II) SELinux: Disabled on system
[ 8.841] (II) Initializing extension GLX
[ 8.852] (II) AIGLX: Loaded and initialized i965
[ 8.852] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.852] (II) Initializing extension XFree86-VidModeExtension
[ 8.852] (II) Initializing extension XFree86-DGA
[ 8.853] (II) Initializing extension XFree86-DRI
[ 8.853] (II) Initializing extension DRI2
[ 8.858] (II) modeset(0): Damage tracking initialized
[ 8.858] (II) modeset(0): Setting screen physical size to 444 x 277
[ 9.003] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.003] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.003] (II) LoadModule: "libinput"
[ 9.003] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 9.016] (II) Module libinput: vendor="X.Org Foundation"
[ 9.016] compiled for 1.20.4, module version = 0.28.2
[ 9.017] Module class: X.Org XInput Driver
[ 9.017] ABI class: X.Org XInput driver, version 24.1
[ 9.017] (II) Using input driver 'libinput' for 'Power Button'
[ 9.017] (**) Power Button: always reports core events
[ 9.017] (**) Option "Device" "/dev/input/event1"
[ 9.017] (**) Option "_source" "server/udev"
[ 9.028] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.028] (II) event1 - Power Button: device is a keyboard
[ 9.028] (II) event1 - Power Button: device removed
[ 9.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 9.048] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.048] (**) Option "xkb_model" "pc105"
[ 9.048] (**) Option "xkb_layout" "us"
[ 9.048] (**) Option "xkb_variant" "cz_sk_de"
[ 9.110] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.111] (II) event1 - Power Button: device is a keyboard
[ 9.113] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 9.113] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.113] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.113] (**) Video Bus: always reports core events
[ 9.113] (**) Option "Device" "/dev/input/event2"
[ 9.113] (**) Option "_source" "server/udev"
[ 9.116] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.116] (II) event2 - Video Bus: device is a keyboard
[ 9.117] (II) event2 - Video Bus: device removed
[ 9.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 9.160] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.160] (**) Option "xkb_model" "pc105"
[ 9.160] (**) Option "xkb_layout" "us"
[ 9.160] (**) Option "xkb_variant" "cz_sk_de"
[ 9.163] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.163] (II) event2 - Video Bus: device is a keyboard
[ 9.165] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 9.165] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 9.165] (II) Using input driver 'libinput' for 'Sleep Button'
[ 9.165] (**) Sleep Button: always reports core events
[ 9.165] (**) Option "Device" "/dev/input/event0"
[ 9.165] (**) Option "_source" "server/udev"
[ 9.167] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 9.167] (II) event0 - Sleep Button: device is a keyboard
[ 9.167] (II) event0 - Sleep Button: device removed
[ 9.184] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 9.185] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 9.185] (**) Option "xkb_model" "pc105"
[ 9.185] (**) Option "xkb_layout" "us"
[ 9.185] (**) Option "xkb_variant" "cz_sk_de"
[ 9.187] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 9.187] (II) event0 - Sleep Button: device is a keyboard
[ 9.191] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 9.191] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 9.191] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 9.191] (**) Logitech USB Receiver: always reports core events
[ 9.191] (**) Option "Device" "/dev/input/event4"
[ 9.191] (**) Option "_source" "server/udev"
[ 9.195] (II) event4 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.195] (II) event4 - Logitech USB Receiver: device is a keyboard
[ 9.195] (II) event4 - Logitech USB Receiver: device removed
[ 9.208] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:046D:C534.0001/input/input4/event4"
[ 9.208] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 9.208] (**) Option "xkb_model" "pc105"
[ 9.208] (**) Option "xkb_layout" "us"
[ 9.208] (**) Option "xkb_variant" "cz_sk_de"
[ 9.213] (II) event4 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.213] (II) event4 - Logitech USB Receiver: device is a keyboard
[ 9.216] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event7)
[ 9.216] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 9.216] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 9.216] (**) Logitech USB Receiver System Control: always reports core events
[ 9.216] (**) Option "Device" "/dev/input/event7"
[ 9.216] (**) Option "_source" "server/udev"
[ 9.220] (II) event7 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.220] (II) event7 - Logitech USB Receiver System Control: device is a keyboard
[ 9.220] (II) event7 - Logitech USB Receiver System Control: device removed
[ 9.237] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input10/event7"
[ 9.237] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 10)
[ 9.237] (**) Option "xkb_model" "pc105"
[ 9.237] (**) Option "xkb_layout" "us"
[ 9.237] (**) Option "xkb_variant" "cz_sk_de"
[ 9.241] (II) event7 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.241] (II) event7 - Logitech USB Receiver System Control: device is a keyboard
[ 9.244] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event5)
[ 9.244] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 9.244] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 9.244] (**) Logitech USB Receiver Mouse: always reports core events
[ 9.244] (**) Option "Device" "/dev/input/event5"
[ 9.244] (**) Option "_source" "server/udev"
[ 9.248] (II) event5 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.248] (II) event5 - Logitech USB Receiver Mouse: device is a pointer
[ 9.248] (II) event5 - Logitech USB Receiver Mouse: device removed
[ 9.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input8/event5"
[ 9.293] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 11)
[ 9.293] (**) Option "AccelerationScheme" "none"
[ 9.293] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 9.293] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 9.293] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 9.312] (II) event5 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.312] (II) event5 - Logitech USB Receiver Mouse: device is a pointer
[ 9.315] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[ 9.315] (II) No input driver specified, ignoring this device.
[ 9.315] (II) This device may have been added with another device file.
[ 9.317] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event6)
[ 9.317] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.317] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 9.317] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 9.317] (**) Option "Device" "/dev/input/event6"
[ 9.317] (**) Option "_source" "server/udev"
[ 9.322] (II) event6 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 9.323] (II) event6 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 9.323] (II) event6 - Logitech USB Receiver Consumer Control: device removed
[ 9.341] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 9.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input9/event6"
[ 9.341] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 12)
[ 9.342] (**) Option "AccelerationScheme" "none"
[ 9.342] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 9.342] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 9.342] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 9.349] (II) event6 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 9.349] (II) event6 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 9.351] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 9.351] (II) No input driver specified, ignoring this device.
[ 9.351] (II) This device may have been added with another device file.
[ 9.353] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 9.353] (II) No input driver specified, ignoring this device.
[ 9.353] (II) This device may have been added with another device file.
[ 9.354] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 9.354] (II) No input driver specified, ignoring this device.
[ 9.354] (II) This device may have been added with another device file.
[ 9.356] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 9.356] (II) No input driver specified, ignoring this device.
[ 9.356] (II) This device may have been added with another device file.
[ 9.357] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 9.357] (II) No input driver specified, ignoring this device.
[ 9.357] (II) This device may have been added with another device file.
[ 9.372] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.372] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 9.372] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 9.372] (**) Option "Device" "/dev/input/event6"
[ 9.372] (**) Option "_source" "_driver/libinput"
[ 9.372] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 9.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0002/input/input9/event6"
[ 9.372] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 13)
[ 9.372] (**) Option "xkb_model" "pc105"
[ 9.372] (**) Option "xkb_layout" "us"
[ 9.372] (**) Option "xkb_variant" "cz_sk_de"
[ 85.233] (II) event1 - Power Button: device removed
[ 85.249] (II) event2 - Video Bus: device removed
[ 85.280] (II) event0 - Sleep Button: device removed
[ 85.300] (II) event4 - Logitech USB Receiver: device removed
[ 85.313] (II) event7 - Logitech USB Receiver System Control: device removed
[ 85.328] (II) event5 - Logitech USB Receiver Mouse: device removed
[ 85.365] (II) event6 - Logitech USB Receiver Consumer Control: device removed
[ 85.381] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.750] (II) UnloadModule: "libinput"
[ 87.751] (II) UnloadModule: "libinput"
[ 87.755] (II) Server terminated successfully (0). Closing log file.
Reply to: