Bug#958904: linux-image-4.19.0-8-rpi: Please set CONFIG_RTC_DRV_DS1307=m
Package: src:linux
Version: 4.19.98-1
Severity: wishlist
Dear Maintainer,
Raspberry Pi Model 1B I'm running this installation from does not have built-in RTC clock.
DS1307-based RTCs are very popular addon for Raspberry Pi, and I happen to have one.
The support of this particular chip is disabled in Debian kernels, so please consider building it as a module
Sincerely yours, Reco
-- Package-specific info:
** Version:
Linux version 4.19.0-8-rpi (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 Debian 4.19.98-1 (2020-01-26)
** Command line:
bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2708.boardrev=0x10 bcm2708.serial=0x631eea77 bcm2708.uart_clock=48000000 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:1E:EA:77 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=tty0 console=ttyAMA0,115200 root=/dev/pi/root rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=64M rootwait
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Hardware : BCM2835
Revision : 0000
Device Tree model: Raspberry Pi Model B Plus Rev 1.2
** Loaded modules:
cfg80211
rfkill
8021q
garp
stp
mrp
llc
ip6t_REJECT
nf_reject_ipv6
xt_mac
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_hashlimit
xt_tcpudp
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
xt_comment
nft_compat
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
vc4
smsc95xx
snd_soc_core
usbnet
mii
snd_pcm_dmaengine
snd_pcm
snd_timer
snd
raspberrypi_hwmon
soundcore
cec
vchiq(C)
bcm2835_rng
rng_core
leds_gpio
zram
zsmalloc
auth_rpcgss
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
dm_mod
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: 10.3
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: armel (armv6l)
Kernel: Linux 4.19.0-8-rpi
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-8-rpi depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-8-rpi recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-8-rpi suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-8-rpi is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20190114-2
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: