Bug#950578: Linux 5.5.0-1-arm64: kernel panic after module bcmgenet was loaded
Package: src:linux
Version: 5.5.13-2
Severity: normal
Dear Maintainer,
I created an arm64 live system for Raspberry Pi 4 using Debian
live-build, and it successfully booted into the initramfs.
However, after the network module bcmgenet was loaded, I got the kernel
panic.
Attached please find the output messages on the serial console.
If you need more info or tests, please let me know.
Thank you very much.
Steven
--
Steven Shiau <steven _at_ stevenshiau org>
Public Key Server PGP Key ID: 4096R/163E3FB0
Fingerprint: EB1D D5BF 6F88 820B BCF5 356C 8E94 C9CD 163E 3FB0
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.5.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-8)) #1 SMP Debian 5.5.13-2 (2020-03-30)
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x00000000ec000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xeb9a9100-0xeb9aafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] percpu: Embedded 32 pages/cpu s93656 r8192 d29224 u131072
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] CPU features: detected: ARM erratum 1319367
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 790272
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=DC:A6:32:55:44:A4 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000 boot=live union=overlay config components noswap edd=on nomodeset enforcing=0 locales=en_US keyboard-layouts=en ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" net.ifnames=0 noeject fetch=http://192.168.76.254/filesystem-czarm64.squashfs ocs_daemonon="ssh" console=ttyAMA0,115200n81
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x02684000-0x06684000] (64MB)
[ 0.000000] Memory: 2757316K/3211264K available (9980K kernel code, 1758K rwdata, 3684K rodata, 5120K init, 552K bss, 191804K reserved, 262144K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x44/0x5c0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 35767 entries in 140 pages
[ 0.000000] ftrace: allocated 140 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000318] Console: colour dummy device 80x25
[ 0.000446] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000460] pid_max: default: 32768 minimum: 301
[ 0.000628] LSM: Security Framework initializing
[ 0.000660] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000756] AppArmor: AppArmor initialized
[ 0.000769] TOMOYO Linux initialized
[ 0.000905] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000966] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003000] ASID allocator initialised with 32768 entries
[ 0.003135] rcu: Hierarchical SRCU implementation.
[ 0.005729] EFI services will not be available.
[ 0.006320] smp: Bringing up secondary CPUs ...
[ 0.006948] Detected PIPT I-cache on CPU1
[ 0.007018] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.007721] Detected PIPT I-cache on CPU2
[ 0.007758] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.008435] Detected PIPT I-cache on CPU3
[ 0.008473] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.008572] smp: Brought up 1 node, 4 CPUs
[ 0.008596] SMP: Total of 4 processors activated.
[ 0.008605] CPU features: detected: 32-bit EL0 Support
[ 0.008614] CPU features: detected: CRC32 instructions
[ 0.033627] CPU: All CPU(s) started at EL2
[ 0.033711] alternatives: patching kernel code
[ 0.035923] devtmpfs: initialized
[ 0.043854] Registered cp15_barrier emulation handler
[ 0.043876] Registered setend emulation handler
[ 0.043889] KASLR enabled
[ 0.044337] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044361] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.050747] pinctrl core: initialized pinctrl subsystem
[ 0.051701] thermal_sys: Registered thermal governor 'fair_share'
[ 0.051705] thermal_sys: Registered thermal governor 'step_wise'
[ 0.051935] DMI not present or invalid.
[ 0.052439] NET: Registered protocol family 16
[ 0.054468] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.054489] audit: initializing netlink subsys (disabled)
[ 0.054666] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[ 0.055884] cpuidle: using governor ladder
[ 0.055912] cpuidle: using governor menu
[ 0.056352] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.056767] Serial: AMBA PL011 UART driver
[ 0.072333] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072349] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.072358] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072367] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.727004] ACPI: Interpreter disabled.
[ 0.727271] iommu: Default domain type: Translated
[ 0.727513] vgaarb: loaded
[ 0.727871] EDAC MC: Ver: 3.0.0
[ 0.729695] clocksource: Switched to clocksource arch_sys_counter
[ 0.792040] VFS: Disk quotas dquot_6.6.0
[ 0.792122] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.792847] AppArmor: AppArmor Filesystem Enabled
[ 0.793810] simple-framebuffer e4e0000.framebuffer: framebuffer at 0xe4e0000, 0x6e7000 bytes, mapped to 0x(____ptrval____)
[ 0.793825] simple-framebuffer e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 0.812649] Console: switching to colour frame buffer device 228x61
[ 0.830857] simple-framebuffer e4e0000.framebuffer: fb0: simplefb registered!
[ 0.830942] pnp: PnP ACPI: disabled
[ 0.838610] NET: Registered protocol family 2
[ 0.839274] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.839321] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.839544] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.840048] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.840278] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.840343] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.840614] NET: Registered protocol family 1
[ 0.840647] NET: Registered protocol family 44
[ 0.840664] PCI: CLS 0 bytes, default 64
[ 0.840902] Trying to unpack rootfs image as initramfs...
[ 13.675165] Freeing initrd memory: 25984K
[ 13.676409] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 13.676622] kvm [1]: IPA Size Limit: 44bits
[ 13.677384] kvm [1]: vgic interrupt IRQ1
[ 13.677551] kvm [1]: Hyp mode initialized successfully
[ 13.679282] Initialise system trusted keyrings
[ 13.679337] Key type blacklist registered
[ 13.679559] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 13.686008] zbud: loaded
[ 13.687045] Platform Keyring initialized
[ 13.687063] Key type asymmetric registered
[ 13.687073] Asymmetric key parser 'x509' registered
[ 13.687115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 13.687371] io scheduler mq-deadline registered
[ 13.692993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.701913] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 13.703060] Serial: AMBA driver
[ 13.703346] msm_serial: driver initialized
[ 13.704334] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 13.704986] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 13.705820] mousedev: PS/2 mouse device common for all mice
[ 13.707641] ledtrig-cpu: registered to indicate activity on CPUs
[ 13.708252] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 13.709077] drop_monitor: Initializing network drop monitor service
[ 13.709957] NET: Registered protocol family 10
[ 13.768066] Segment Routing with IPv6
[ 13.768198] mip6: Mobile IPv6
[ 13.768211] NET: Registered protocol family 17
[ 13.768446] mpls_gso: MPLS GSO support
[ 13.769156] registered taskstats version 1
[ 13.769169] Loading compiled-in X.509 certificates
[ 13.925965] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 13.926070] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 13.926195] zswap: loaded using pool lzo/zbud
[ 13.926517] Key type ._fscrypt registered
[ 13.926527] Key type .fscrypt registered
[ 13.926610] AppArmor: AppArmor sha1 policy hashing enabled
[ 13.931195] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 13.931404] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 14.857253] printk: console [ttyAMA0] enabled
[ 14.863556] raspberrypi-firmware soc:firmware: Request 0x00000001 returned status 0x00000000
[ 14.872099] raspberrypi-firmware soc:firmware: Request 0x00030046 returned status 0x00000000
[ 14.880919] raspberrypi-firmware soc:firmware: Request 0x00030007 returned status 0x00000000
[ 14.889380] raspberrypi-clk raspberrypi-clk: Failed to get pllb min freq: -22
[ 14.896521] raspberrypi-clk raspberrypi-clk: Failed to initialize pllb, -22
[ 14.903496] raspberrypi-clk: probe of raspberrypi-clk failed with error -22
[ 14.910851] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 14.919318] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 0 config (-22 80)
[ 14.927463] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 14.935918] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 1 config (-22 81)
[ 14.944061] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 14.952513] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 2 config (-22 82)
[ 14.962662] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 14.971115] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 3 config (-22 83)
[ 14.979257] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 14.987709] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84)
[ 14.995850] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.004300] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 5 config (-22 85)
[ 15.012439] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.020890] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86)
[ 15.029026] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.037477] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 7 config (-22 87)
[ 15.046246] raspberrypi-firmware soc:firmware: Request 0x00030030 returned status 0x00000000
[ 15.055366] hctosys: unable to open rtc device (rtc0)
[ 15.060965] uart-pl011 fe201000.serial: no DMA platform data
[ 15.075946] Freeing unused kernel memory: 5120K
[ 15.104660] Checked W+X mappings: passed, no W+X pages found
[ 15.110352] Run /init as init process
Loading, please wait...
Starting version 245.4-2
[ 15.449547] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.458042] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86)
[ 15.478583] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 15.490922] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.499474] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84)
[ 15.499483] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.499500] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86)
[ 15.518279] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000
[ 15.532721] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84)
[ 15.580245] sdhci: Secure Digital Host Controller Interface driver
[ 15.586507] sdhci: Copyright(c) Pierre Ossman
[ 15.592735] reg-fixed-voltage: probe of sd_vcc_reg failed with error -22
[ 15.610014] libphy: Fixed MDIO Bus: probed
[ 15.614623] sdhci-pltfm: SDHCI platform and OF driver helper
[ 15.620249] gpio-regulator: probe of sd_io_1v8_reg failed with error -22
[ 15.639675] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 15.661756] mmc0: SDHCI controller on fe300000.mmcnr [fe300000.mmcnr] using PIO
[ 15.681731] libphy: bcmgenet MII bus: probed
[ 15.686586] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 15.693782] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 15.700977] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 15.709513] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 15.716746] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 15.750706] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 15.781309] random: fast init done
[ 15.788043] mmc0: new high speed SDIO card at address 0001
Begin: Loading essential drivers ... [ 15.853816] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 15.859234] Copyright (c) 2007 Atheros Corporation.
[ 15.919823] pps_core: LinuxPPS API ver. 1 registered
[ 15.924829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 15.939005] PTP clock support registered
[ 16.041144] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 16.167440] usbcore: registered new interface driver usbfs
[ 16.173029] usbcore: registered new interface driver hub
[ 16.178505] usbcore: registered new device driver usb
[ 16.203248] usbcore: registered new interface driver asix
[ 16.224969] usbcore: registered new interface driver ax88179_178a
[ 16.247080] usbcore: registered new interface driver catc
[ 16.271756] NET: Registered protocol family 35
[ 16.279918] usbcore: registered new interface driver cdc_phonet
[ 16.299768] usbcore: registered new interface driver cdc_eem
[ 16.321254] usbcore: registered new interface driver cdc_ether
[ 16.346223] usbcore: registered new interface driver cdc_ncm
[ 16.358044] usbcore: registered new interface driver cdc_wdm
[ 16.367361] usbcore: registered new interface driver cdc_mbim
[ 16.397533] usbcore: registered new interface driver cdc_subset
[ 16.417769] usbcore: registered new interface driver ch9200
[ 16.437373] usbcore: registered new interface driver cx82310_eth
[ 16.458922] usbcore: registered new interface driver dm9601
[ 16.478414] usbcore: registered new interface driver gl620a
[ 16.511599] hso: drivers/net/usb/hso.c: Option Wireless
[ 16.516957] usbcore: registered new interface driver hso
[ 16.536641] usbcore: registered new interface driver huawei_cdc_ncm
[ 16.557331] usbcore: registered new interface driver int51x1
[ 16.577859] usbcore: registered new interface driver ipheth
[ 16.597990] usbcore: registered new interface driver kalmia
[ 16.620217] usbcore: registered new interface driver kaweth
[ 16.648647] usbcore: registered new interface driver lan78xx
[ 16.668577] usbcore: registered new interface driver lg-vl600
[ 16.689334] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 16.711544] usbcore: registered new interface driver net1080
[ 16.734888] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 16.742385] usbcore: registered new interface driver pegasus
[ 16.762003] usbcore: registered new interface driver plusb
[ 16.788071] usbcore: registered new interface driver qmi_wwan
[ 16.817914] usbcore: registered new interface driver r8152
[ 16.839080] usbcore: registered new interface driver rndis_host
[ 16.860796] usbcore: registered new interface driver rtl8150
[ 16.882684] usbcore: registered new interface driver sierra_net
[ 16.910259] usbcore: registered new interface driver smsc75xx
[ 16.934633] smsc95xx: unknown parameter 'macaddr' ignored
[ 16.940456] usbcore: registered new interface driver smsc95xx
[ 16.961717] usbcore: registered new interface driver sr9700
[ 16.983855] usbcore: registered new interface driver CoreChips
[ 17.014740] usbcore: registered new interface driver zaurus
[ 17.056751] device-mapper: uevent: version 1.0.3
[ 17.061830] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 17.285713] raid6: neonx8 gen() 1310 MB/s
[ 17.357693] raid6: neonx8 xor() 1200 MB/s
[ 17.429738] raid6: neonx4 gen() 1069 MB/s
[ 17.501712] raid6: neonx4 xor() 958 MB/s
[ 17.573738] raid6: neonx2 gen() 898 MB/s
[ 17.645716] raid6: neonx2 xor() 821 MB/s
[ 17.717700] raid6: neonx1 gen() 739 MB/s
[ 17.789697] raid6: neonx1 xor() 687 MB/s
[ 17.861729] raid6: int64x8 gen() 694 MB/s
[ 17.933704] raid6: int64x8 xor() 514 MB/s
[ 18.005718] raid6: int64x4 gen() 573 MB/s
[ 18.077708] raid6: int64x4 xor() 471 MB/s
[ 18.149775] raid6: int64x2 gen() 463 MB/s
[ 18.221737] raid6: int64x2 xor() 355 MB/s
[ 18.293843] raid6: int64x1 gen() 370 MB/s
[ 18.365783] raid6: int64x1 xor() 278 MB/s
[ 18.370055] raid6: using algorithm neonx8 gen() 1310 MB/s
[ 18.375454] raid6: .... xor() 1200 MB/s, rmw enabled
[ 18.380418] raid6: using neon recovery algorithm
[ 18.390407] xor: measuring software checksum speed
[ 18.433685] 8regs : 2391.000 MB/sec
[ 18.477682] 32regs : 2737.000 MB/sec
[ 18.521682] arm64_neon: 2540.000 MB/sec
[ 18.525867] xor: using function: 32regs (2737.000 MB/sec)
[ 18.534334] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/live-top ... done.
Begin: Running /scripts/live-premount ... done.
[ 18.887353] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 18.895653] bcmgenet fd580000.genet eth0: Link is Down
Waiting for ethernet card(s) up... If this fails, maybe the ethernet card is not supported by the kernel 5.5.0-1-arm64?
Waiting for link to come up on eth0... 1 2 3 4 5 [ 23.997866] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 24.005863] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
6
Link is up
Using timeout of 15 seconds for network configuration.
Using max dhcp loop 10 times for each network card.
[ 27.837690] ------------[ cut here ]------------
[ 27.842318] NETDEV WATCHDOG: eth0 (bcmgenet): transmit queue 0 timed out
[ 27.849080] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x384/0x390
[ 27.857339] Modules linked in: raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 multipath linear md_mod dm_mirror dm_region_hash dm_log dm_mod zaurus sr9800 sr9700 smsc95xx smsc75xx crc16 sierra_net rtl8150 rndis_host r8152 qmi_wwan plusb pegasus net1080 mcs7830 lg_vl600 lan78xx kaweth kalmia ipheth int51x1 huawei_cdc_ncm hso rfkill gl620a dm9601 cx82310_eth ch9200 cdc_subset cdc_mbim cdc_wdm cdc_ncm cdc_ether cdc_eem cdc_phonet phonet catc ax88179_178a asix usbnet usbcore usb_common mtdblock mtd_blkdevs mtd bnx2x ptp pps_core mdio libcrc32c crc32c_generic bnx2 atl2 atl1c atl1 mii broadcom bcm_phy_lib mdio_bcm_unimac genet sdhci_iproc of_mdio sdhci_pltfm fixed_phy libphy sdhci gpio_regulator phy_generic fixed
[ 27.925383] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-1-arm64 #1 Debian 5.5.13-2
[ 27.933293] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 27.939122] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 27.943912] pc : dev_watchdog+0x384/0x390
[ 27.947919] lr : dev_watchdog+0x384/0x390
[ 27.951921] sp : ffff800010003d40
[ 27.955228] x29: ffff800010003d40 x28: 0000000000000140
[ 27.960538] x27: 00000000ffffffff x26: ffffd9026a94f018
[ 27.965845] x25: 0000000000000000 x24: 0000000000000000
[ 27.971152] x23: 0000000000000001 x22: ffff0000e5938000
[ 27.976459] x21: ffff0000e5938480 x20: ffffd9026ace7000
[ 27.981765] x19: 0000000000000000 x18: 0000000000000010
[ 27.987072] x17: 0000000000000000 x16: 0000000000000000
[ 27.992378] x15: ffffd9026acf34f8 x14: ffffffffffffffff
[ 27.997684] x13: ffff800090003a77 x12: ffff800010003a7f
[ 28.002990] x11: ffffd9026ad0e000 x10: 0000000000000000
[ 28.008296] x9 : ffffd90269b6b4d8 x8 : 000000000000012d
[ 28.013602] x7 : 0000000000000017 x6 : ffffd9026aeaa553
[ 28.018909] x5 : ffffd9026af0b4a0 x4 : 0000000000000000
[ 28.024215] x3 : 0000000000000000 x2 : 00000000ffffffff
[ 28.029521] x1 : 225d329810e60000 x0 : 0000000000000000
[ 28.034827] Call trace:
[ 28.037274] dev_watchdog+0x384/0x390
[ 28.040935] call_timer_fn+0x34/0x170
[ 28.044593] __run_timers.part.0+0x294/0x340
[ 28.048858] run_timer_softirq+0x40/0x78
[ 28.052776] __do_softirq+0x130/0x324
[ 28.056435] irq_exit+0xa0/0xc8
[ 28.059574] __handle_domain_irq+0x6c/0xc0
[ 28.063665] gic_handle_irq+0x58/0xa8
[ 28.067320] el1_irq+0xb8/0x140
[ 28.070458] arch_cpu_idle+0x3c/0x1c0
[ 28.074117] default_idle_call+0x20/0x34
[ 28.078038] do_idle+0x20c/0x288
[ 28.081262] cpu_startup_entry+0x28/0x68
[ 28.085182] rest_init+0xbc/0xc8
[ 28.088408] arch_call_rest_init+0x14/0x1c
[ 28.092500] start_kernel+0x4d8/0x500
[ 28.096157] ---[ end trace 9b4ef17cb6942e4a ]---
IP-Config: eth0 hardware address dc:a6:32:55:44:a4 mtu 1500 DHCP RARP
IP-Config: no response after 15 secs - giving up
Reply to: