root@eb8440p:/home/andrew# dmesg
[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2018-04-23
[ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=UUID=8def690b-ee7d-4d54-b94a-87b9aa4e9b19 ro quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bafc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bafc2000-0x00000000bb6c1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb6c2000-0x00000000bb7c1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb7c2000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 8440p/172A, BIOS 68CCU Ver. F.12 03/09/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.590 MHz processor
[ 0.002179] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002182] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002190] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.002195] MTRR default type: uncachable
[ 0.002195] MTRR fixed ranges enabled:
[ 0.002196] 00000-9FFFF write-back
[ 0.002197] A0000-BFFFF uncachable
[ 0.002198] C0000-FFFFF write-protect
[ 0.002199] MTRR variable ranges enabled:
[ 0.002200] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.002201] 1 base 000000000 mask F80000000 write-back
[ 0.002202] 2 base 080000000 mask FC0000000 write-back
[ 0.002203] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.002204] 4 base 100000000 mask FC0000000 write-back
[ 0.002204] 5 base 138000000 mask FF8000000 uncachable
[ 0.002205] 6 disabled
[ 0.002206] 7 disabled
[ 0.002754] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002895] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.012988] BRK [0x134e01000, 0x134e01fff] PGTABLE
[ 0.012990] BRK [0x134e02000, 0x134e02fff] PGTABLE
[ 0.012992] BRK [0x134e03000, 0x134e03fff] PGTABLE
[ 0.013049] BRK [0x134e04000, 0x134e04fff] PGTABLE
[ 0.013052] BRK [0x134e05000, 0x134e05fff] PGTABLE
[ 0.013255] BRK [0x134e06000, 0x134e06fff] PGTABLE
[ 0.013270] BRK [0x134e07000, 0x134e07fff] PGTABLE
[ 0.013321] BRK [0x134e08000, 0x134e08fff] PGTABLE
[ 0.013371] BRK [0x134e09000, 0x134e09fff] PGTABLE
[ 0.013413] RAMDISK: [mem 0x31555000-0x34aa1fff]
[ 0.013422] ACPI: Early table checksum verification disabled
[ 0.013524] ACPI: RSDP 0x00000000000FC600 000024 (v02 HPQOEM)
[ 0.013528] ACPI: XSDT 0x00000000BB7FE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.013534] ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 HPQOEM 172A 0000000F HP 00000001)
[ 0.013540] ACPI: DSDT 0x00000000BB7D6000 020160 (v02 HPQOEM 172A 00000001 INTL 20060912)
[ 0.013543] ACPI: FACS 0x00000000BB760000 000040
[ 0.013546] ACPI: FACS 0x00000000BB760000 000040
[ 0.013549] ACPI: HPET 0x00000000BB7FB000 000038 (v01 HPQOEM 172A 00000001 HP 00000001)
[ 0.013552] ACPI: APIC 0x00000000BB7FA000 0000BC (v01 HPQOEM 172A 00000001 HP 00000001)
[ 0.013556] ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HPQOEM 172A 00000001 HP 00000001)
[ 0.013559] ACPI: TCPA 0x00000000BB7F7000 000032 (v02 HPQOEM 172A 00000000 HP 00000001)
[ 0.013562] ACPI: SSDT 0x00000000BB7D3000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[ 0.013566] ACPI: SSDT 0x00000000BB7D2000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[ 0.013569] ACPI: SLIC 0x00000000BB7D1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.013572] ACPI: DMAR 0x00000000BB7D0000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.013576] ACPI: SSDT 0x00000000BB7CF000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.013579] ACPI: SSDT 0x00000000BB7CE000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.013582] ACPI: SSDT 0x00000000BB7CD000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.013586] ACPI: ASF! 0x00000000BB7F8000 0000A0 (v32 HPQOEM 172A 00000001 HP 00000001)
[ 0.013597] ACPI: Local APIC address 0xfee00000
[ 0.013717] No NUMA configuration found
[ 0.013718] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.013722] NODE_DATA(0) allocated [mem 0x137ffb000-0x137ffffff]
[ 0.013753] Zone ranges:
[ 0.013754] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013755] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013756] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.013757] Device empty
[ 0.013758] Movable zone start for each node
[ 0.013759] Early memory node ranges
[ 0.013760] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.013760] node 0: [mem 0x0000000000100000-0x00000000bafc1fff]
[ 0.013761] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.013762] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.013765] Reserved but unavailable: 98 pages
[ 0.013767] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.013769] On node 0 totalpages: 995169
[ 0.013770] DMA zone: 64 pages used for memmap
[ 0.013770] DMA zone: 21 pages reserved
[ 0.013771] DMA zone: 3998 pages, LIFO batch:0
[ 0.013880] DMA32 zone: 11904 pages used for memmap
[ 0.013881] DMA32 zone: 761795 pages, LIFO batch:63
[ 0.036086] Normal zone: 3584 pages used for memmap
[ 0.036089] Normal zone: 229376 pages, LIFO batch:63
[ 0.042025] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[ 0.042262] ACPI: PM-Timer IO Port: 0x408
[ 0.042265] ACPI: Local APIC address 0xfee00000
[ 0.042274] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.042274] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.042275] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.042276] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.042276] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.042277] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.042277] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.042278] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.042294] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.042296] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.042298] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.042299] ACPI: IRQ0 used by override.
[ 0.042300] ACPI: IRQ9 used by override.
[ 0.042303] Using ACPI (MADT) for SMP configuration information
[ 0.042304] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.042311] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.042331] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.042333] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.042334] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.042334] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.042336] PM: Registered nosave memory: [mem 0xbafc2000-0xbb6c1fff]
[ 0.042336] PM: Registered nosave memory: [mem 0xbb6c2000-0xbb7c1fff]
[ 0.042337] PM: Registered nosave memory: [mem 0xbb7c2000-0xbb7fefff]
[ 0.042338] PM: Registered nosave memory: [mem 0xbb800000-0xbbffffff]
[ 0.042339] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
[ 0.042339] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[ 0.042340] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.042340] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.042341] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.042341] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.042342] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.042343] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.042343] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[ 0.042344] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[ 0.042344] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.042345] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.042345] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.042346] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.042347] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[ 0.042347] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[ 0.042349] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.042350] Booting paravirtualized kernel on bare hardware
[ 0.042354] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.240373] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.240384] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.240818] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
[ 0.240826] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
[ 0.240827] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.240855] Built 1 zonelists, mobility grouping on. Total pages: 979596
[ 0.240856] Policy zone: Normal
[ 0.240858] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=UUID=8def690b-ee7d-4d54-b94a-87b9aa4e9b19 ro quiet
[ 0.251058] Calgary: detecting Calgary via BIOS EBDA area
[ 0.251061] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.268383] Memory: 3770416K/3980676K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 210260K reserved, 0K cma-reserved)
[ 0.268497] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.268505] Kernel/User page tables isolation: enabled
[ 0.268550] ftrace: allocating 31872 entries in 125 pages
[ 0.285657] rcu: Hierarchical RCU implementation.
[ 0.285661] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.285663] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.289537] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.291950] Console: colour VGA+ 80x25
[ 0.291957] console [tty0] enabled
[ 0.291977] ACPI: Core revision 20180810
[ 0.292259] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.292274] hpet clockevent registered
[ 0.292280] APIC: Switch to symmetric I/O mode setup
[ 0.292282] DMAR: Host address width 36
[ 0.292283] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.292290] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.292291] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.292293] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.292294] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.292296] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.292297] DMAR: RMRR base: 0x00000000000000 end: 0x00000000000fff
[ 0.292298] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.292876] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.312277] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228440bc414, max_idle_ns: 440795202126 ns
[ 0.312293] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.18 BogoMIPS (lpj=9578360)
[ 0.312295] pid_max: default: 32768 minimum: 301
[ 0.312325] Security Framework initialized
[ 0.312326] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.312348] AppArmor: AppArmor initialized
[ 0.313249] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.313726] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.313755] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.313772] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.314051] CPU0: Thermal monitoring enabled (TM1)
[ 0.314059] process: using mwait in idle threads
[ 0.314064] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.314064] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.314067] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.314068] Spectre V2 : Mitigation: Full generic retpoline
[ 0.314069] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.314069] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.314079] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.314079] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.314080] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.314106] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.314284] Freeing SMP alternatives memory: 24K
[ 0.324279] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[ 0.324279] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.324279] core: CPUID marked event: 'bus cycles' unavailable
[ 0.324279] ... version: 3
[ 0.324279] ... bit width: 48
[ 0.324279] ... generic registers: 4
[ 0.324279] ... value mask: 0000ffffffffffff
[ 0.324279] ... max period: 000000007fffffff
[ 0.324279] ... fixed-purpose events: 3
[ 0.324279] ... event mask: 000000070000000f
[ 0.324279] rcu: Hierarchical SRCU implementation.
[ 0.324279] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.324279] smp: Bringing up secondary CPUs ...
[ 0.324279] x86: Booting SMP configuration:
[ 0.324279] .... node #0, CPUs: #1
[ 0.324450] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.324457] #2 #3
[ 0.330630] smp: Brought up 1 node, 4 CPUs
[ 0.330630] smpboot: Max logical packages: 2
[ 0.330630] smpboot: Total of 4 processors activated (19156.72 BogoMIPS)
[ 0.332612] devtmpfs: initialized
[ 0.332612] x86/mm: Memory block size: 128MB
[ 0.332740] PM: Registering ACPI NVS region [mem 0xbb6c2000-0xbb7c1fff] (1048576 bytes)
[ 0.332740] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.332740] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.332740] pinctrl core: initialized pinctrl subsystem
[ 0.332740] NET: Registered protocol family 16
[ 0.332740] audit: initializing netlink subsys (disabled)
[ 0.332740] audit: type=2000 audit(1583493281.040:1): state=initialized audit_enabled=0 res=1
[ 0.332740] cpuidle: using governor ladder
[ 0.332740] cpuidle: using governor menu
[ 0.332740] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.332740] ACPI: bus type PCI registered
[ 0.332740] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.332740] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.332740] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.332740] PCI: Using configuration type 1 for base access
[ 0.332740] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.332740] mtrr: probably your BIOS does not setup all CPUs.
[ 0.332740] mtrr: corrected configuration.
[ 0.333039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.336365] ACPI: Added _OSI(Module Device)
[ 0.336366] ACPI: Added _OSI(Processor Device)
[ 0.336367] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336367] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336369] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.336369] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.346385] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.347546] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.362699] ACPI: Dynamic OEM Table Load:
[ 0.362706] ACPI: SSDT 0xFFFF8A8DB6877400 0003F9 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.363053] ACPI: Dynamic OEM Table Load:
[ 0.363059] ACPI: SSDT 0xFFFF8A8DB7925000 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.363561] ACPI: Dynamic OEM Table Load:
[ 0.363566] ACPI: SSDT 0xFFFF8A8DB6875800 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.363810] ACPI: Dynamic OEM Table Load:
[ 0.363814] ACPI: SSDT 0xFFFF8A8DB6F67400 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.364591] ACPI: EC: EC started
[ 0.364592] ACPI: EC: interrupt blocked
[ 0.810629] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.810631] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.810633] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.810633] ACPI: Interpreter enabled
[ 0.810655] ACPI: (supports S0 S3 S4 S5)
[ 0.810656] ACPI: Using IOAPIC for interrupt routing
[ 0.810680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.810931] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.813083] ACPI: Power Resource [APPR] (off)
[ 0.814792] ACPI: Power Resource [COMP] (off)
[ 0.815013] ACPI: Power Resource [LPP] (off)
[ 0.818285] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.818290] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.819051] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.820128] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.820129] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.820646] PCI host bridge to bus 0000:00
[ 0.820648] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.820650] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.820651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.820652] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.820653] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[ 0.820654] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 0.820656] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.820664] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.820692] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.820769] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.820779] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.820784] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.820788] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
[ 0.820907] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.820937] pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit]
[ 0.821036] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.821132] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.821158] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
[ 0.821169] pci 0000:00:19.0: reg 0x14: [mem 0xd472a000-0xd472afff]
[ 0.821180] pci 0000:00:19.0: reg 0x18: [io 0x5020-0x503f]
[ 0.821271] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.821360] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.821386] pci 0000:00:1a.0: reg 0x10: [mem 0xd4729000-0xd47293ff]
[ 0.821496] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.821585] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.821616] pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit]
[ 0.821731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.821828] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.821950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.822046] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.822169] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.822267] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.822387] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.822490] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.822515] pci 0000:00:1d.0: reg 0x10: [mem 0xd4728000-0xd47283ff]
[ 0.822625] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.822709] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.822869] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.823060] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.823086] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
[ 0.823096] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
[ 0.823106] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
[ 0.823117] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
[ 0.823127] pci 0000:00:1f.2: reg 0x20: [io 0x5000-0x501f]
[ 0.823138] pci 0000:00:1f.2: reg 0x24: [mem 0xd4727000-0xd47277ff]
[ 0.823204] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.823295] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.823325] pci 0000:00:1f.6: reg 0x10: [mem 0xd4726000-0xd4726fff 64bit]
[ 0.823531] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.823538] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
[ 0.823646] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[ 0.823651] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.823655] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd45fffff]
[ 0.823746] pci 0000:43:00.0: [8086:4239] type 00 class 0x028000
[ 0.823805] pci 0000:43:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[ 0.824022] pci 0000:43:00.0: PME# supported from D0 D3hot D3cold
[ 0.824162] pci 0000:00:1c.3: PCI bridge to [bus 43]
[ 0.824169] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.824198] pci_bus 0000:44: extended config space not accessible
[ 0.824228] pci 0000:44:06.0: [1180:0832] type 00 class 0x0c0010
[ 0.824236] pci 0000:44:06.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[ 0.824237] pci 0000:44:06.0: MMC cards are now supported by standard SDHCI controller
[ 0.824256] pci 0000:44:06.0: reg 0x10: [mem 0xd0401000-0xd04017ff]
[ 0.824358] pci 0000:44:06.0: supports D1 D2
[ 0.824359] pci 0000:44:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.824408] pci 0000:44:06.1: [1180:0822] type 00 class 0x080500
[ 0.824428] pci 0000:44:06.1: reg 0x10: [mem 0xd0403000-0xd04030ff]
[ 0.824523] pci 0000:44:06.1: supports D1 D2
[ 0.824524] pci 0000:44:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.824571] pci 0000:44:06.2: [1180:0476] type 02 class 0x060700
[ 0.824590] pci 0000:44:06.2: reg 0x10: [mem 0xd0400000-0xd0400fff]
[ 0.824631] pci 0000:44:06.2: supports D1 D2
[ 0.824632] pci 0000:44:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.824710] pci 0000:00:1e.0: PCI bridge to [bus 44-45] (subtractive decode)
[ 0.824714] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.824718] pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.824725] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.824726] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.824727] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.824728] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.824729] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
[ 0.824731] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
[ 0.824758] pci_bus 0000:45: extended config space not accessible
[ 0.824773] pci_bus 0000:45: busn_res: [bus 45] end can not be updated to 48
[ 0.824778] pci 0000:00:1e.0: bridge has subordinate 45 but max busn 48
[ 0.825640] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.825690] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.825738] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.825786] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.825835] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.825883] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.825931] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.825978] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.826023] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.826026] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.826030] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.826098] PCI host bridge to bus 0000:ff
[ 0.826099] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.826104] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.826147] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.826194] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.826233] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.826272] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.826310] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.826730] ACPI: EC: interrupt unblocked
[ 0.826741] ACPI: EC: event unblocked
[ 0.826748] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.826750] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.826825] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.826825] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.826825] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.826825] vgaarb: loaded
[ 0.826825] pps_core: LinuxPPS API ver. 1 registered
[ 0.826825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.826825] PTP clock support registered
[ 0.826825] EDAC MC: Ver: 3.0.0
[ 0.826825] PCI: Using ACPI for IRQ routing
[ 0.836998] PCI: pci_cache_line_size set to 64 bytes
[ 0.837056] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.837057] e820: reserve RAM buffer [mem 0xbafc2000-0xbbffffff]
[ 0.837058] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.837230] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.837237] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.839287] clocksource: Switched to clocksource tsc-early
[ 0.847640] VFS: Disk quotas dquot_6.6.0
[ 0.847662] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.847787] AppArmor: AppArmor Filesystem Enabled
[ 0.847810] pnp: PnP ACPI init
[ 0.848138] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.848139] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.848141] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.848142] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.848143] system 00:00: [mem 0xd4800000-0xd4800fff] has been reserved
[ 0.848145] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.848146] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.848148] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.848149] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.848150] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.848157] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.848294] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.848378] system 00:02: [io 0x0200-0x027f] has been reserved
[ 0.848379] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.848381] system 00:02: [io 0xffff] has been reserved
[ 0.848382] system 00:02: [io 0xffff] has been reserved
[ 0.848383] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.848385] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.848386] system 00:02: [io 0xef80-0xef9f] has been reserved
[ 0.848390] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.848417] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.848539] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.848562] pnp 00:05: Plug and Play ACPI device, IDs SYN0165 SYN0100 SYN0002 PNP0f13 (active)
[ 0.848978] pnp: PnP ACPI: found 6 devices
[ 0.854814] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.854843] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 add_align 100000
[ 0.854877] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4900000-0xd4afffff 64bit pref]
[ 0.854880] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.854886] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
[ 0.854895] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[ 0.854898] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.854904] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd45fffff]
[ 0.854908] pci 0000:00:1c.1: bridge window [mem 0xd4900000-0xd4afffff 64bit pref]
[ 0.854915] pci 0000:00:1c.3: PCI bridge to [bus 43]
[ 0.854920] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.854933] pci 0000:44:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[ 0.854935] pci 0000:44:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
[ 0.854936] pci 0000:44:06.2: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.854937] pci 0000:44:06.2: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.854939] pci 0000:44:06.2: CardBus bridge to [bus 45]
[ 0.854941] pci 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 0.854945] pci 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 0.854949] pci 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.854953] pci 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.854957] pci 0000:00:1e.0: PCI bridge to [bus 44-45]
[ 0.854960] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.854965] pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.854975] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.854976] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.854977] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.854978] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[ 0.854979] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[ 0.854980] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[ 0.854982] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
[ 0.854983] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.854984] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd45fffff]
[ 0.854986] pci_bus 0000:02: resource 2 [mem 0xd4900000-0xd4afffff 64bit pref]
[ 0.854987] pci_bus 0000:43: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.854988] pci_bus 0000:44: resource 0 [io 0x2000-0x2fff]
[ 0.854989] pci_bus 0000:44: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.854990] pci_bus 0000:44: resource 4 [io 0x0000-0x0cf7 window]
[ 0.854992] pci_bus 0000:44: resource 5 [io 0x0d00-0xffff window]
[ 0.854993] pci_bus 0000:44: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.854994] pci_bus 0000:44: resource 7 [mem 0xc0000000-0xdfffffff window]
[ 0.854995] pci_bus 0000:44: resource 8 [mem 0xf0000000-0xfedfffff window]
[ 0.854996] pci_bus 0000:44: resource 9 [mem 0xfee01000-0xffffffff window]
[ 0.854997] pci_bus 0000:45: resource 0 [io 0x2000-0x20ff]
[ 0.854998] pci_bus 0000:45: resource 1 [io 0x2400-0x24ff]
[ 0.854999] pci_bus 0000:45: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.855000] pci_bus 0000:45: resource 3 [mem 0xdc000000-0xdfffffff]
[ 0.855099] NET: Registered protocol family 2
[ 0.855278] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.855298] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.855368] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.855472] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.855519] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.855535] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.855599] NET: Registered protocol family 1
[ 0.855604] NET: Registered protocol family 44
[ 0.855629] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.856367] PCI: CLS 64 bytes, default 64
[ 0.856431] Unpacking initramfs...
[ 1.729262] Freeing initrd memory: 54580K
[ 1.748305] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.748308] software IO TLB: mapped [mem 0xb6fc2000-0xbafc2000] (64MB)
[ 1.749114] Initialise system trusted keyrings
[ 1.749127] Key type blacklist registered
[ 1.749195] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.750438] zbud: loaded
[ 1.945050] Key type asymmetric registered
[ 1.945053] Asymmetric key parser 'x509' registered
[ 1.945066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.945114] io scheduler noop registered
[ 1.945114] io scheduler deadline registered
[ 1.945149] io scheduler cfq registered (default)
[ 1.945150] io scheduler mq-deadline registered
[ 1.946190] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.946215] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 1.946238] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[ 1.946261] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.946328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.946345] intel_idle: MWAIT substates: 0x1120
[ 1.946345] intel_idle: v0.4.1 model 0x25
[ 1.946484] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.947746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.948215] Linux agpgart interface v0.103
[ 1.948339] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.948340] AMD IOMMUv2 functionality not available on this system
[ 1.948684] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.950520] i8042: Detected active multiplexing controller, rev 1.1
[ 1.951296] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.951305] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.951358] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.951401] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.951443] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.951735] mousedev: PS/2 mouse device common for all mice
[ 1.951818] rtc_cmos 00:03: RTC can wake from S4
[ 1.952070] rtc_cmos 00:03: registered as rtc0
[ 1.952109] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.952211] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.952866] NET: Registered protocol family 10
[ 1.962799] Segment Routing with IPv6
[ 1.962852] mip6: Mobile IPv6
[ 1.962856] NET: Registered protocol family 17
[ 1.962979] mpls_gso: MPLS GSO support
[ 1.963514] mce: Using 9 MCE banks
[ 1.963593] microcode: sig=0x20655, pf=0x10, revision=0x7
[ 1.963729] microcode: Microcode Update Driver: v2.2.
[ 1.963749] sched_clock: Marking stable (1961256424, 2458556)->(2091569513, -127854533)
[ 1.964060] registered taskstats version 1
[ 1.964061] Loading compiled-in X.509 certificates
[ 1.976592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.005934] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.005951] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2.005974] zswap: loaded using pool lzo/zbud
[ 2.006050] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.006488] rtc_cmos 00:03: setting system clock to 2020-03-06 11:14:43 UTC (1583493283)
[ 2.008039] Freeing unused kernel image memory: 1584K
[ 2.036372] Write protecting the kernel read-only data: 16384k
[ 2.037344] Freeing unused kernel image memory: 2028K
[ 2.037723] Freeing unused kernel image memory: 772K
[ 2.056038] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.056041] x86/mm: Checking user space page tables
[ 2.074315] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.074318] Run /init as init process
[ 2.142160] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 2.142178] ACPI: Sleep Button [SLPB]
[ 2.142248] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 2.142256] ACPI: Lid Switch [LID]
[ 2.142312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 2.142339] ACPI: Power Button [PWRF]
[ 2.160216] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.175896] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.175899] ACPI: Thermal Zone [EXTZ] (0 C)
[ 2.179661] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.179665] ACPI: Thermal Zone [EX2Z] (45 C)
[ 2.184967] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[ 2.184975] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.184978] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.184982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.184983] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.184986] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.184987] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.184991] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.184991] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.186632] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.186635] ACPI: Thermal Zone [PWMZ] (11 C)
[ 2.186722] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.186723] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.187154] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.190159] thermal LNXTHERM:03: registered as thermal_zone3
[ 2.190160] ACPI: Thermal Zone [LOCZ] (41 C)
[ 2.190800] thermal LNXTHERM:04: registered as thermal_zone4
[ 2.190801] ACPI: Thermal Zone [GFXZ] (0 C)
[ 2.203010] ACPI: bus type USB registered
[ 2.203044] usbcore: registered new interface driver usbfs
[ 2.203055] usbcore: registered new interface driver hub
[ 2.205427] SCSI subsystem initialized
[ 2.226685] sdhci: Secure Digital Host Controller Interface driver
[ 2.226686] sdhci: Copyright(c) Pierre Ossman
[ 2.230366] thermal LNXTHERM:05: registered as thermal_zone5
[ 2.230369] ACPI: Thermal Zone [BATZ] (20 C)
[ 2.236613] cryptd: max_cpu_qlen set to 1000
[ 2.243076] usbcore: registered new device driver usb
[ 2.259652] thermal LNXTHERM:06: registered as thermal_zone6
[ 2.259654] ACPI: Thermal Zone [EGXZ] (0 C)
[ 2.260052] thermal LNXTHERM:07: registered as thermal_zone7
[ 2.260054] ACPI: Thermal Zone [CPUZ] (52 C)
[ 2.260363] thermal LNXTHERM:08: registered as thermal_zone8
[ 2.260364] ACPI: Thermal Zone [MCHZ] (47 C)
[ 2.260657] thermal LNXTHERM:09: registered as thermal_zone9
[ 2.260659] ACPI: Thermal Zone [PCHZ] (59 C)
[ 2.262004] sdhci-pci 0000:44:06.1: SDHCI controller found [1180:0822] (rev 25)
[ 2.262354] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.262396] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.262412] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.263473] SSE version of gcm_enc/dec engaged.
[ 2.266149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.267484] ehci-pci: EHCI PCI platform driver
[ 2.267852] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.267862] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.267879] ehci-pci 0000:00:1a.0: debug port 2
[ 2.271809] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.271902] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4729000
[ 2.273335] libata version 3.00 loaded.
[ 2.280442] ahci 0000:00:1f.2: version 3.0
[ 2.280877] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.280938] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
[ 2.280942] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 2.282392] mmc0: SDHCI controller on PCI [0000:44:06.1] using DMA
[ 2.284300] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.284450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.284453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.284454] usb usb1: Product: EHCI Host Controller
[ 2.284455] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
[ 2.284457] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.284757] hub 1-0:1.0: USB hub found
[ 2.284771] hub 1-0:1.0: 3 ports detected
[ 2.285323] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.285331] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.285348] ehci-pci 0000:00:1d.0: debug port 2
[ 2.289271] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.289403] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4728000
[ 2.304351] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.304461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.304463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.304465] usb usb2: Product: EHCI Host Controller
[ 2.304467] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
[ 2.304468] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.304672] hub 2-0:1.0: USB hub found
[ 2.304683] hub 2-0:1.0: 3 ports detected
[ 2.329125] scsi host0: ahci
[ 2.329362] scsi host1: ahci
[ 2.329510] scsi host2: ahci
[ 2.329651] scsi host3: ahci
[ 2.329791] scsi host4: ahci
[ 2.329935] scsi host5: ahci
[ 2.330031] ata1: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727100 irq 28
[ 2.330034] ata2: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727180 irq 28
[ 2.330037] ata3: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727200 irq 28
[ 2.330038] ata4: DUMMY
[ 2.330041] ata5: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727300 irq 28
[ 2.330043] ata6: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727380 irq 28
[ 2.340331] firewire_ohci 0000:44:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 2.395187] pci 0000:00:00.0: Intel HD Graphics Chipset
[ 2.395206] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.395672] pci 0000:00:00.0: detected 32768K stolen memory
[ 2.395742] [drm] Replacing VGA console driver
[ 2.396126] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:f9:56:bf
[ 2.396128] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.396201] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
[ 2.396249] Console: switching to colour dummy device 80x25
[ 2.397142] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.399415] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.399416] [drm] Driver supports precise vblank timestamp query.
[ 2.400051] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.422595] [drm] RC6 disabled, disabling runtime PM support
[ 2.445235] random: fast init done
[ 2.533450] mmc0: new SDXC card at address aaaa
[ 2.538331] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[ 2.542008] mmcblk0: p1 p2 < p5 >
[ 2.620292] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.642474] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.643771] ata1.00: unexpected _GTF length (8)
[ 2.644045] ata1.00: ATA-8: ST9250410AS, 0006HPM1, max UDMA/100
[ 2.644047] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.644290] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.645681] ata1.00: unexpected _GTF length (8)
[ 2.645986] ata1.00: configured for UDMA/100
[ 2.646173] scsi 0:0:0:0: Direct-Access ATA ST9250410AS HPM1 PQ: 0 ANSI: 5
[ 2.662235] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 2.663499] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.666256] acpi device:0d: registered as cooling_device4
[ 2.666352] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 2.682798] fbcon: inteldrmfb (fb0) is primary device
[ 2.752309] tsc: Refined TSC clocksource calibration: 2394.413 MHz
[ 2.752322] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x228399ca0ed, max_idle_ns: 440795326939 ns
[ 2.752349] clocksource: Switched to clocksource tsc
[ 2.776729] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 2.776733] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.777107] hub 1-1:1.0: USB hub found
[ 2.777181] hub 1-1:1.0: 6 ports detected
[ 2.801078] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 2.801081] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.801438] hub 2-1:1.0: USB hub found
[ 2.801536] hub 2-1:1.0: 8 ports detected
[ 2.880544] firewire_core 0000:44:06.0: created device fw0: GUID 5566778811223344, S400
[ 2.959556] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.963402] ata2.00: unexpected _GTF length (8)
[ 2.963408] ata2.00: ATAPI: hp DVDRAM GT31L, MR52, max UDMA/100
[ 2.967428] ata2.00: unexpected _GTF length (8)
[ 2.967434] ata2.00: configured for UDMA/100
[ 2.970307] scsi 1:0:0:0: CD-ROM hp DVDRAM GT31L MR52 PQ: 0 ANSI: 5
[ 3.229693] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 3.311390] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.628029] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.943686] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.981708] Console: switching to colour frame buffer device 170x48
[ 4.000906] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.011909] psmouse serio4: synaptics: queried max coordinates: x [..5482], y [..4558]
[ 4.022937] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 4.022945] sd 0:0:0:0: [sda] Write Protect is off
[ 4.022946] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.022954] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.063923] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 4.064526] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.066966] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.066969] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.067188] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.085186] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 598102
[ 4.132591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 4.904325] raid6: sse2x1 gen() 7168 MB/s
[ 4.972317] raid6: sse2x1 xor() 5532 MB/s
[ 5.040323] raid6: sse2x2 gen() 8500 MB/s
[ 5.108325] raid6: sse2x2 xor() 6550 MB/s
[ 5.176323] raid6: sse2x4 gen() 9551 MB/s
[ 5.244323] raid6: sse2x4 xor() 7065 MB/s
[ 5.244324] raid6: using algorithm sse2x4 gen() 9551 MB/s
[ 5.244324] raid6: .... xor() 7065 MB/s, rmw enabled
[ 5.244325] raid6: using ssse3x2 recovery algorithm
[ 5.245236] xor: measuring software checksum speed
[ 5.284317] prefetch64-sse: 12061.000 MB/sec
[ 5.324316] generic_sse: 10587.000 MB/sec
[ 5.324318] xor: using function: prefetch64-sse (12061.000 MB/sec)
[ 5.325017] async_tx: api initialized (async)
[ 5.431054] Btrfs loaded, crc32c=crc32c-intel
[ 6.261413] BTRFS: device fsid fd1b4a2d-56bd-4427-866c-c5d51bf2efd3 devid 1 transid 147 /dev/sda1
[ 6.261833] BTRFS: device label home devid 1 transid 87780 /dev/sda6
[ 6.265342] BTRFS: device label home devid 2 transid 87780 /dev/mmcblk0p5
[ 6.266662] BTRFS: device fsid 8def690b-ee7d-4d54-b94a-87b9aa4e9b19 devid 1 transid 38779 /dev/sda5
[ 6.268499] BTRFS: device fsid 8def690b-ee7d-4d54-b94a-87b9aa4e9b19 devid 2 transid 38779 /dev/mmcblk0p1
[ 6.295026] PM: Image not found (code -22)
[ 6.318204] BTRFS info (device sda5): disk space caching is enabled
[ 6.318208] BTRFS info (device sda5): has skinny extents
[ 8.027088] systemd[1]: Inserted module 'autofs4'
[ 8.119223] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.136554] systemd[1]: Detected architecture x86-64.
[ 8.151229] systemd[1]: Set hostname to <eb8440p>.
[ 8.877927] random: lvmconfig: uninitialized urandom read (4 bytes read)
[ 8.987542] random: crng init done
[ 9.348208] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.348296] systemd[1]: Reached target System Time Synchronized.
[ 9.355419] systemd[1]: Listening on udev Control Socket.
[ 9.355630] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.355733] systemd[1]: Listening on LVM2 poll daemon socket.
[ 9.355752] systemd[1]: Reached target Libvirt guests shutdown.
[ 9.355847] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.444863] BTRFS info (device sda5): use lzo compression, level 0
[ 9.444866] BTRFS info (device sda5): disk space caching is enabled
[ 9.543245] lp: driver loaded but no devices found
[ 9.556888] RPC: Registered named UNIX socket transport module.
[ 9.556892] RPC: Registered udp transport module.
[ 9.556893] RPC: Registered tcp transport module.
[ 9.556893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.575330] ppdev: user-space parallel port driver
[ 9.627879] systemd-journald[340]: Received request to flush runtime journal from PID 1
[ 10.672027] ACPI: AC Adapter [AC] (on-line)
[ 10.695708] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 10.701778] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 10.714441] hp_accel: hardware type HPB64xx found
[ 10.715112] lis3lv02d: 8 bits sensor found
[ 10.773311] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 10.773424] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 10.780386] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 10.803691] iTCO_vendor_support: vendor-support=0
[ 10.807821] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.807889] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 10.809425] yenta_cardbus 0000:44:06.2: CardBus bridge found [103c:172a]
[ 10.810785] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.835717] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.836717] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 10.837364] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 10.864604] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 10.945097] yenta_cardbus 0000:44:06.2: ISA IRQ mask 0x0cb8, PCI irq 22
[ 10.945102] yenta_cardbus 0000:44:06.2: Socket status: 30000810
[ 10.945160] yenta_cardbus 0000:44:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 10.945163] yenta_cardbus 0000:44:06.2: pcmcia: parent PCI bridge window: [mem 0xd0400000-0xd04fffff]
[ 10.945165] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0400000-0xd04fffff:
[ 10.945170] excluding 0xd0400000-0xd040ffff
[ 10.968923] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 10.990828] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.005734] hp_wmi: query 0xd returned error 0x5
[ 11.005818] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 11.108298] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B3X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 11.108302] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.108304] snd_hda_codec_idt hdaudioC0D0: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[ 11.108305] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 11.108307] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 11.108309] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
[ 11.108310] snd_hda_codec_idt hdaudioC0D0: Mic=0xb
[ 11.108312] snd_hda_codec_idt hdaudioC0D0: Line=0xe
[ 11.149814] Intel(R) Wireless WiFi driver for Linux
[ 11.149816] Copyright(c) 2003- 2015 Intel Corporation
[ 11.150029] iwlwifi 0000:43:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.152807] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 11.152820] excluding 0xc0000-0xfffff
[ 11.152845] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 11.152854] excluding 0xa0000000-0xa0ffffff
[ 11.152877] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 11.152885] excluding 0x60000000-0x60ffffff
[ 11.167130] iwlwifi 0000:43:00.0: firmware: failed to load iwlwifi-6000-4.ucode (-2)
[ 11.167193] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 11.167255] iwlwifi 0000:43:00.0: Direct firmware load for iwlwifi-6000-4.ucode failed with error -2
[ 11.167261] iwlwifi 0000:43:00.0: iwlwifi-6000-4 is required
[ 11.167302] iwlwifi 0000:43:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[ 11.200307] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 11.201474] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.201552] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 11.201628] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 11.201699] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 11.201773] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 11.201849] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 11.201922] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 11.299856] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 11.299922] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[ 11.839476] BTRFS info (device sda6): use lzo compression, level 0
[ 11.839480] BTRFS info (device sda6): disk space caching is enabled
[ 11.865783] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 11.884313] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 11.884319] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0410000-0xd04fffff:
[ 11.889973] excluding 0xd04fe000-0xd050bfff
[ 11.890153] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
[ 12.133674] scsi host6: pata_pcmcia
[ 12.133756] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
[ 12.157465] BTRFS info (device sda6): bdev /dev/mmcblk0p5 errs: wr 10622355, rd 6750584, flush 0, corrupt 476697, gen 1741
[ 13.169102] Adding 3905532k swap on /dev/sda7. Priority:-2 extents:1 across:3905532k FS
[ 13.317182] BTRFS info (device sda1): disk space caching is enabled
[ 13.317186] BTRFS info (device sda1): has skinny extents
[ 13.870326] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 13.900371] XFS (sda3): Mounting V4 Filesystem
[ 14.023455] XFS (sda3): Ending clean mount
[ 14.334477] audit: type=1400 audit(1583493295.821:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=5800 comm="apparmor_parser"
[ 14.334484] audit: type=1400 audit(1583493295.821:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=5800 comm="apparmor_parser"
[ 14.334487] audit: type=1400 audit(1583493295.821:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=5800 comm="apparmor_parser"
[ 14.348784] audit: type=1400 audit(1583493295.837:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=5802 comm="apparmor_parser"
[ 14.358951] audit: type=1400 audit(1583493295.845:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=5896 comm="apparmor_parser"
[ 14.372066] audit: type=1400 audit(1583493295.857:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=5799 comm="apparmor_parser"
[ 14.372072] audit: type=1400 audit(1583493295.857:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=5799 comm="apparmor_parser"
[ 14.372075] audit: type=1400 audit(1583493295.857:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=5921 comm="apparmor_parser"
[ 14.378409] audit: type=1400 audit(1583493295.865:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=5947 comm="apparmor_parser"
[ 14.390899] audit: type=1400 audit(1583493295.877:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=5952 comm="apparmor_parser"
[ 15.849760] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 18.838823] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 18.838915] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 23.108497] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[ 49.721801] fuse init (API version 7.27)
[ 55.532559] rfkill: input handler disabled
[ 124.962524] rfkill: input handler enabled
[ 139.608918] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 139.608923] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 139.608929] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 139.608934] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 139.608940] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 139.617252] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 139.617256] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 139.617263] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 139.617270] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 139.617276] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 139.758995] PM: suspend entry (deep)
[ 139.758998] PM: Syncing filesystems ... done.
[ 141.046690] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 141.048447] OOM killer disabled.
[ 141.048448] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 141.049837] Suspending console(s) (use no_console_suspend to debug)
[ 141.051583] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 141.064425] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 141.064708] sd 0:0:0:0: [sda] Stopping disk
[ 141.170039] e1000e: EEE TX LPI TIMER: 00000000
[ 142.088892] ACPI: EC: interrupt blocked
[ 142.108481] ACPI: Preparing to enter system sleep state S3
[ 142.109952] ACPI: EC: event blocked
[ 142.109953] ACPI: EC: EC stopped
[ 142.109953] PM: Saving platform NVS memory
[ 142.110657] Disabling non-boot CPUs ...
[ 142.125860] smpboot: CPU 1 is now offline
[ 142.149747] smpboot: CPU 2 is now offline
[ 142.173612] smpboot: CPU 3 is now offline
[ 142.177392] ACPI: Low-level resume complete
[ 142.177446] ACPI: EC: EC started
[ 142.177447] PM: Restoring platform NVS memory
[ 142.178520] Enabling non-boot CPUs ...
[ 142.178576] x86: Booting SMP configuration:
[ 142.178577] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 142.180943] cache: parent cpu1 should not be sleeping
[ 142.181430] CPU1 is up
[ 142.181464] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 142.184131] cache: parent cpu2 should not be sleeping
[ 142.184508] CPU2 is up
[ 142.184541] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 142.186946] cache: parent cpu3 should not be sleeping
[ 142.187331] CPU3 is up
[ 142.189759] ACPI: Waking up from system sleep state S3
[ 142.220195] ACPI: EC: interrupt unblocked
[ 142.220671] yenta_cardbus 0000:44:06.2: enabling device (0006 -> 0007)
[ 142.237990] firewire_ohci 0000:44:06.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[ 142.237992] firewire_ohci 0000:44:06.0: MMC cards are now supported by standard SDHCI controller
[ 142.280022] ACPI: EC: event unblocked
[ 142.282109] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 142.282128] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 142.282322] sd 0:0:0:0: [sda] Starting disk
[ 142.618478] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 142.920789] ata6: SATA link down (SStatus 0 SControl 300)
[ 142.920858] ata3: SATA link down (SStatus 0 SControl 300)
[ 142.920889] ata5: SATA link down (SStatus 0 SControl 300)
[ 142.920925] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 143.003135] ata2.00: unexpected _GTF length (8)
[ 143.006212] ata2.00: unexpected _GTF length (8)
[ 143.006220] ata2.00: configured for UDMA/100
[ 143.073744] firewire_core 0000:44:06.0: rediscovered device fw0
[ 143.318633] acpi LNXPOWER:02: Turning OFF
[ 143.318768] acpi LNXPOWER:01: Turning OFF
[ 143.318810] OOM killer enabled.
[ 143.318812] Restarting tasks ...
[ 143.318988] acpi PNP0501:00: Still not present
[ 143.319081] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 143.319084] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 143.319089] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 143.319094] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 143.319098] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 143.319170] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 143.319171] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 143.319176] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 143.319181] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 143.319186] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 143.326771] done.
[ 143.385886] video LNXVIDEO:01: Restoring backlight state
[ 143.438097] PM: suspend exit
[ 143.457750] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 143.457762] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[ 144.091325] psmouse serio4: synaptics: queried max coordinates: x [..5482], y [..4558]
[ 145.321709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 145.323239] ata1.00: unexpected _GTF length (8)
[ 145.325335] ata1.00: unexpected _GTF length (8)
[ 145.325605] ata1.00: configured for UDMA/100
[ 145.664258] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 153.690272] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 153.690277] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 153.690283] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 153.690289] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 153.690295] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 169.837499] PM: suspend entry (deep)
[ 169.837502] PM: Syncing filesystems ... done.
[ 170.480254] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 170.481766] OOM killer disabled.
[ 170.481766] Freezing remaining freezable tasks ... (elapsed 0.052 seconds) done.
[ 170.534257] Suspending console(s) (use no_console_suspend to debug)
[ 170.535112] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 170.549830] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 170.550207] sd 0:0:0:0: [sda] Stopping disk
[ 170.654958] e1000e: EEE TX LPI TIMER: 00000000
[ 171.570315] ACPI: EC: interrupt blocked
[ 171.592133] ACPI: Preparing to enter system sleep state S3
[ 171.595115] ACPI: EC: event blocked
[ 171.595116] ACPI: EC: EC stopped
[ 171.595118] PM: Saving platform NVS memory
[ 171.596314] Disabling non-boot CPUs ...
[ 171.611436] smpboot: CPU 1 is now offline
[ 171.627414] smpboot: CPU 2 is now offline
[ 171.643105] smpboot: CPU 3 is now offline
[ 171.645813] ACPI: Low-level resume complete
[ 171.645865] ACPI: EC: EC started
[ 171.645865] PM: Restoring platform NVS memory
[ 171.646950] Enabling non-boot CPUs ...
[ 171.647035] x86: Booting SMP configuration:
[ 171.647036] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 171.649428] cache: parent cpu1 should not be sleeping
[ 171.649913] CPU1 is up
[ 171.649947] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 171.652638] cache: parent cpu2 should not be sleeping
[ 171.653018] CPU2 is up
[ 171.653050] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 171.655444] cache: parent cpu3 should not be sleeping
[ 171.655835] CPU3 is up
[ 171.658246] ACPI: Waking up from system sleep state S3
[ 171.685844] ACPI: EC: interrupt unblocked
[ 171.686233] yenta_cardbus 0000:44:06.2: enabling device (0006 -> 0007)
[ 171.703196] firewire_ohci 0000:44:06.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[ 171.703198] firewire_ohci 0000:44:06.0: MMC cards are now supported by standard SDHCI controller
[ 171.753349] ACPI: EC: event unblocked
[ 171.753586] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 171.753606] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 171.753794] sd 0:0:0:0: [sda] Starting disk
[ 172.095972] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 172.243051] pcmcia_socket pcmcia_socket0: *** DANGER *** unable to remove socket power
[ 172.246938] acpi LNXPOWER:02: Turning OFF
[ 172.246980] acpi LNXPOWER:01: Turning OFF
[ 172.247050] OOM killer enabled.
[ 172.247051] Restarting tasks ...
[ 172.247114] acpi PNP0501:00: Still not present
[ 172.247205] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 172.247207] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 172.247212] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 172.247216] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 172.247221] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 172.247308] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 172.247310] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 172.247314] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 172.247319] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 172.247324] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 172.247744] done.
[ 172.298393] video LNXVIDEO:01: Restoring backlight state
[ 172.370973] PM: suspend exit
[ 172.401572] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 172.401605] ata5: SATA link down (SStatus 0 SControl 300)
[ 172.403773] ata3: SATA link down (SStatus 0 SControl 300)
[ 172.404041] ata6: SATA link down (SStatus 0 SControl 300)
[ 172.484491] ata2.00: unexpected _GTF length (8)
[ 172.487471] ata2.00: unexpected _GTF length (8)
[ 172.487479] ata2.00: configured for UDMA/100
[ 172.547080] firewire_core 0000:44:06.0: rediscovered device fw0
[ 172.931111] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 172.931119] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[ 173.550518] psmouse serio4: synaptics: queried max coordinates: x [..5482], y [..4558]
[ 174.803132] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 174.804575] ata1.00: unexpected _GTF length (8)
[ 174.806652] ata1.00: unexpected _GTF length (8)
[ 174.806977] ata1.00: configured for UDMA/100
[ 175.149592] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 183.757115] rfkill: input handler disabled
[ 1009.970825] rfkill: input handler enabled
[ 1026.631620] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 1026.631625] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 1026.631631] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 1026.631637] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 1026.631642] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 1026.782024] PM: suspend entry (deep)
[ 1026.782028] PM: Syncing filesystems ... done.
[ 1032.892144] Freezing user space processes ... (elapsed 0.022 seconds) done.
[ 1032.915137] OOM killer disabled.
[ 1032.915138] Freezing remaining freezable tasks ... (elapsed 0.040 seconds) done.
[ 1032.955413] Suspending console(s) (use no_console_suspend to debug)
[ 1032.956533] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1032.971197] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1032.971574] sd 0:0:0:0: [sda] Stopping disk
[ 1033.074257] e1000e: EEE TX LPI TIMER: 00000000
[ 1033.999672] ACPI: EC: interrupt blocked
[ 1034.021406] ACPI: Preparing to enter system sleep state S3
[ 1034.025369] ACPI: EC: event blocked
[ 1034.025370] ACPI: EC: EC stopped
[ 1034.025372] PM: Saving platform NVS memory
[ 1034.026572] Disabling non-boot CPUs ...
[ 1034.040789] smpboot: CPU 1 is now offline
[ 1034.064927] smpboot: CPU 2 is now offline
[ 1034.088460] smpboot: CPU 3 is now offline
[ 1034.092010] ACPI: Low-level resume complete
[ 1034.092063] ACPI: EC: EC started
[ 1034.092063] PM: Restoring platform NVS memory
[ 1034.093141] Enabling non-boot CPUs ...
[ 1034.093199] x86: Booting SMP configuration:
[ 1034.093200] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1034.095568] cache: parent cpu1 should not be sleeping
[ 1034.096050] CPU1 is up
[ 1034.096085] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1034.098737] cache: parent cpu2 should not be sleeping
[ 1034.099119] CPU2 is up
[ 1034.099151] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 1034.101556] cache: parent cpu3 should not be sleeping
[ 1034.101952] CPU3 is up
[ 1034.104385] ACPI: Waking up from system sleep state S3
[ 1034.130689] ACPI: EC: interrupt unblocked
[ 1034.131261] yenta_cardbus 0000:44:06.2: enabling device (0006 -> 0007)
[ 1034.148679] firewire_ohci 0000:44:06.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[ 1034.148681] firewire_ohci 0000:44:06.0: MMC cards are now supported by standard SDHCI controller
[ 1034.202478] ACPI: EC: event unblocked
[ 1034.202651] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1034.202659] sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1034.202884] sd 0:0:0:0: [sda] Starting disk
[ 1034.537364] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 1034.840421] pcmcia_socket pcmcia_socket0: *** DANGER *** unable to remove socket power
[ 1034.844276] acpi LNXPOWER:02: Turning OFF
[ 1034.844320] acpi LNXPOWER:01: Turning OFF
[ 1034.844355] OOM killer enabled.
[ 1034.844356] Restarting tasks ...
[ 1034.844455] acpi PNP0501:00: Still not present
[ 1034.844559] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 1034.844561] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 1034.844565] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 1034.844570] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 1034.844574] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 1034.844647] yenta_cardbus 0000:44:06.2: CardBus bridge to [bus 45]
[ 1034.844649] yenta_cardbus 0000:44:06.2: bridge window [io 0x2000-0x20ff]
[ 1034.844653] yenta_cardbus 0000:44:06.2: bridge window [io 0x2400-0x24ff]
[ 1034.844658] yenta_cardbus 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 1034.844663] yenta_cardbus 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 1034.848282] done.
[ 1034.848840] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1034.848954] ata5: SATA link down (SStatus 0 SControl 300)
[ 1034.848982] ata6: SATA link down (SStatus 0 SControl 300)
[ 1034.850533] ata3: SATA link down (SStatus 0 SControl 300)
[ 1034.889348] video LNXVIDEO:01: Restoring backlight state
[ 1034.930406] ata2.00: unexpected _GTF length (8)
[ 1034.933678] ata2.00: unexpected _GTF length (8)
[ 1034.933685] ata2.00: configured for UDMA/100
[ 1034.958918] PM: suspend exit
[ 1035.016410] firewire_core 0000:44:06.0: rediscovered device fw0
[ 1035.364422] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 1035.364429] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[ 1035.995291] psmouse serio4: synaptics: queried max coordinates: x [..5482], y [..4558]
[ 1037.136453] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1037.137881] ata1.00: unexpected _GTF length (8)
[ 1037.140047] ata1.00: unexpected _GTF length (8)
[ 1037.140332] ata1.00: configured for UDMA/100
[ 1041.094948] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 1047.514236] rfkill: input handler disabled
root@eb8440p:/home/andrew# lspci -nvv
00:00.0 0600: 8086:0044 (rev 02)
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 0300: 8086:0046 (rev 02) (prog-if 00 [VGA controller])
Subsystem: 103c:172a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5050 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 402e
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
00:16.0 0780: 8086:3b64 (rev 06)
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d4724000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee02004 Data: 4021
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 0200: 8086:10ea (rev 05)
Subsystem: 103c:172a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d472a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5020 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee08004 Data: 4021
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 0c03: 8086:3b3c (rev 05) (prog-if 20 [EHCI])
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4729000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 0403: 8086:3b56 (rev 05)
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee04004 Data: 4021
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 0604: 8086:3b42 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d4600000-d46fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 4027
Capabilities: [90] Subsystem: 103c:172a
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.1 0604: 8086:3b44 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=42, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d0600000-d45fffff
Prefetchable memory behind bridge: 00000000d4900000-00000000d4afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 402c
Capabilities: [90] Subsystem: 103c:172a
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.3 0604: 8086:3b48 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 26
Bus: primary=00, secondary=43, subordinate=43, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise+
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 4021
Capabilities: [90] Subsystem: 103c:172a
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 0c03: 8086:3b34 (rev 05) (prog-if 20 [EHCI])
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4728000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 0604: 8086:2448 (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=44, subordinate=45, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: 103c:172a
00:1f.0 0601: 8086:3b07 (rev 05)
Subsystem: 103c:172a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 0106: 8086:3b2f (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: 103c:172a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at 5048 [size=8]
Region 1: I/O ports at 505c [size=4]
Region 2: I/O ports at 5040 [size=8]
Region 3: I/O ports at 5058 [size=4]
Region 4: I/O ports at 5000 [size=32]
Region 5: Memory at d4727000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 402d
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.6 1180: 8086:3b32 (rev 05)
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4726000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: intel ips
Kernel modules: intel_ips
43:00.0 0280: 8086:4239 (rev 35)
Subsystem: 8086:1311
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 58-94-6b-ff-ff-b1-55-ac
Kernel modules: iwlwifi
44:06.0 0c00: 1180:0832 (rev 06) (prog-if 10 [OHCI])
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
44:06.1 0805: 1180:0822 (rev 25)
Subsystem: 103c:172a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0403000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
44:06.2 0607: 1180:0476 (rev bb)
Subsystem: 103c:172a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: [virtual] Memory at d0400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=00, subordinate=00, sec-latency=0
Memory window 0: d8000000-dbffffff
Memory window 1: dc000000-dfffffff
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
Capabilities: [dc] Power Management version 2
Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Bridge: PM- B3+
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
ff:00.0 0600: 8086:2c62 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 0600: 8086:2d01 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 0600: 8086:2d10 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 0600: 8086:2d11 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 0600: 8086:2d12 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 0600: 8086:2d13 (rev 02)
Subsystem: 8086:8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
root@eb8440p:/home/andrew#