[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#918800: marked as done (linux-image-4.19.0-1-armmp-lpae: USB 3.0 network card operates only at USB 2.0 speed on Odroid HC1)

Your message dated Wed, 19 Feb 2020 00:14:44 +0100
with message-id <20200218231444.GP842@vis.fritz.box>
and subject line Re: PROBLEM: USB 3.0 NIC operates only at USB 2.0 speed on Odroid HC1
has caused the Debian Bug report #918800,
regarding linux-image-4.19.0-1-armmp-lpae: USB 3.0 network card operates only at USB 2.0 speed on Odroid HC1
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
918800: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=918800
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.19.12-1
Severity: normal

Dear Maintainer,

The Odroid HC1 ARM board contains a JMicron JMS578 USB 3.0 to SATA
Bridge and a Realtek Gbps Ethernet device connected to an USB 3.0 host.
The SATA bridge works correctly at USB 3.0 speed, but the Ethernet
controller operates only at USB 2.0 speed:

root@odroid:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M

I have tested linux 4.19.12-1 from Debian testing, 4.19.13-1 from
unstable and 4.20-1~exp1 from experimental. They all show the same
behavior.

-- Package-specific info:
** Version:
Linux version 4.19.0-1-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)

** Command line:
net.ifnames=0 console=ttySAC2,115200n8

** Not tainted

** Kernel log:
root@odroid:~# dmesg | grep 'usb \?3'
[    8.637794] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    8.645903] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[    8.653300] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    8.672414] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    8.672550] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[    8.672570] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    8.958202] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[    8.963984] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[    8.973066] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[    8.978923] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[    9.140610] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    9.153605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.170064] usb usb3: Product: xHCI Host Controller
[    9.170074] usb usb3: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[    9.181849] usb usb3: SerialNumber: xhci-hcd.4.auto
[    9.766820] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    9.919833] usb 3-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    9.926565] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    9.933682] usb 3-1: Product: USB 10/100/1000 LAN
[    9.938356] usb 3-1: Manufacturer: Realtek
[    9.942417] usb 3-1: SerialNumber: 000001000000
[   14.805113] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
Full kernel log is attached.

** Model information
Hardware	: SAMSUNG EXYNOS (Flattened Device Tree)
Revision	: 0000
Device Tree model: Hardkernel Odroid HC1

** Loaded modules:
cdc_ether
usbnet
r8152
mii
sg
pwm_samsung
exynos_trng
rng_core
s3c2410_wdt
leds_pwm
cpufreq_dt
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
uas
usb_storage
scsi_mod
xhci_plat_hcd
xhci_hcd
dwc3
udc_core
phy_generic
clk_s2mps11
s2mps11
phy_exynos_mipi_video
dwc3_exynos
phy_exynos_dp_video
ohci_exynos
ohci_hcd
ehci_exynos
ehci_hcd
dw_mmc_exynos
dw_mmc_pltfm
i2c_exynos5
usbcore
dw_mmc
phy_exynos_usb2
phy_exynos5_usbdrd

** PCI devices:
not available

** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. 
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: armhf (armv7l)

Kernel: Linux 4.19.0-1-armmp-lpae (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-1-armmp-lpae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.132
ii  kmod                                    25-2
ii  linux-base                              4.5

Versions of packages linux-image-4.19.0-1-armmp-lpae recommends:
ii  apparmor             2.13.2-3
ii  firmware-linux-free  3.4
ii  irqbalance           1.5.0-0.1

Versions of packages linux-image-4.19.0-1-armmp-lpae suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-1-armmp-lpae is related to:
ii  firmware-amd-graphics     20180825+dfsg-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20180825+dfsg-1
ii  firmware-misc-nonfree     20180825+dfsg-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.19.0-1-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000bd800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000]   DMA zone: 1728 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:63
[    0.000000] Running under secure firmware.
[    0.000000] random: get_random_bytes called from start_kernel+0x9c/0x528 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39756 r8192 d21684 u69632
[    0.000000] pcpu-alloc: s39756 r8192 d21684 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: net.ifnames=0 console=ttySAC2,115200n8
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2001184K/2074624K available (10240K kernel code, 1130K rwdata, 2600K rodata, 2048K init, 310K bss, 57056K reserved, 16384K cma-reserved, 1271808K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   (1131 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 311 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 33476 entries in 99 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000034] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.006208] Console: colour dummy device 80x30
[    0.006284] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.006305] pid_max: default: 32768 minimum: 301
[    0.006577] Security Framework initialized
[    0.006593] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006722] AppArmor: AppArmor initialized
[    0.006834] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006857] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008173] CPU: Testing write buffer coherency: ok
[    0.009088] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.010058] Setting up static identity map for 0x40400000 - 0x404000a0
[    0.010719] ARM CCI driver probed
[    0.010960] Exynos MCPM support installed
[    0.013373] rcu: Hierarchical SRCU implementation.
[    0.018245] EFI services will not be available.
[    0.019027] smp: Bringing up secondary CPUs ...
[    0.020090] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.021262] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.022394] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.023554] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.023563] CPU4: Spectre v2: incorrect context switching function, system vulnerable
[    0.024932] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024940] CPU5: Spectre v2: incorrect context switching function, system vulnerable
[    0.026168] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.026176] CPU6: Spectre v2: incorrect context switching function, system vulnerable
[    0.027387] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.027395] CPU7: Spectre v2: incorrect context switching function, system vulnerable
[    0.027591] smp: Brought up 1 node, 8 CPUs
[    0.027611] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.027623] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[    0.027632] CPU: This may indicate a broken bootloader or firmware.
[    0.029332] devtmpfs: initialized
[    0.049407] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    0.049850] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.049878] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.051445] pinctrl core: initialized pinctrl subsystem
[    0.054110] DMI not present or invalid.
[    0.054661] NET: Registered protocol family 16
[    0.057994] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.060549] audit: initializing netlink subsys (disabled)
[    0.060898] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
[    0.063249] No ATAGs?
[    0.063587] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.063605] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.065306] Serial: AMBA PL011 UART driver
[    0.118179] EXYNOS5420 PMU initialized
[    0.140023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.150102] vgaarb: loaded
[    0.152212] media: Linux media interface: v0.10
[    0.152280] videodev: Linux video capture interface: v2.00
[    0.152354] pps_core: LinuxPPS API ver. 1 registered
[    0.152366] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.152396] PTP clock support registered
[    0.154758] clocksource: Switched to clocksource mct-frc
[    0.255320] VFS: Disk quotas dquot_6.6.0
[    0.255435] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.256392] AppArmor: AppArmor Filesystem Enabled
[    0.273938] NET: Registered protocol family 2
[    0.275099] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.275151] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.275259] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.275442] TCP: Hash tables configured (established 8192 bind 8192)
[    0.275702] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.275761] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.276096] NET: Registered protocol family 1
[    0.276146] PCI: CLS 0 bytes, default 64
[    0.276828] Unpacking initramfs...
[    0.770791] random: fast init done
[    2.007851] Freeing initrd memory: 19364K
[    2.008028] kvm [1]: HYP mode not available
[    2.009192] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    2.010029] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    2.013935] Initialise system trusted keyrings
[    2.014274] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.024839] zbud: loaded
[    6.763168] Key type asymmetric registered
[    6.763189] Asymmetric key parser 'x509' registered
[    6.763283] bounce: pool size: 64 pages
[    6.763366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    6.763638] io scheduler noop registered
[    6.763653] io scheduler deadline registered
[    6.763901] io scheduler cfq registered (default)
[    6.763914] io scheduler mq-deadline registered
[    6.791325] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    6.791347] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    6.795248] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    6.795268] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    6.796594] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    6.796612] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    6.801530] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    6.805148] Serial: AMBA driver
[    6.805457] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    6.806113] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    6.806739] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    7.586024] console [ttySAC2] enabled
[    7.590335] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    7.605418] libphy: Fixed MDIO Bus: probed
[    7.609359] mousedev: PS/2 mouse device common for all mice
[    7.623410] ledtrig-cpu: registered to indicate activity on CPUs
[    7.631061] NET: Registered protocol family 10
[    7.659760] Segment Routing with IPv6
[    7.662050] mip6: Mobile IPv6
[    7.664945] NET: Registered protocol family 17
[    7.669362] mpls_gso: MPLS GSO support
[    7.673941] ThumbEE CPU extension supported.
[    7.677330] Registering SWP/SWPB emulation handler
[    7.683165] registered taskstats version 1
[    7.686126] Loading compiled-in X.509 certificates
[    7.945717] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    7.953858] zswap: loaded using pool lzo/zbud
[    7.958656] AppArmor: AppArmor sha1 policy hashing enabled
[    8.013442] hctosys: unable to open rtc device (rtc0)
[    8.017093] sr_init: No PMIC hook to init smartreflex
[    8.060543] Freeing unused kernel memory: 2048K
[    8.071143] Run /init as init process
[    8.637794] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    8.645903] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[    8.651183] Synopsys Designware Multimedia Card Interface Driver
[    8.653300] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    8.653549] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    8.653675] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[    8.658533] usbcore: registered new interface driver usbfs
[    8.658689] usbcore: registered new interface driver hub
[    8.659107] usbcore: registered new device driver usb
[    8.663862] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    8.664615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.666881] ehci-exynos: EHCI EXYNOS driver
[    8.667505] exynos-ehci 12110000.usb: EHCI Host Controller
[    8.667544] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    8.669034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.671046] ohci-exynos: OHCI EXYNOS driver
[    8.672414] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    8.672550] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[    8.672570] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    8.678535] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    8.685773] exynos-ohci 12120000.usb: USB Host Controller
[    8.780585] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    8.781197] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    8.781609] exynos-ehci 12110000.usb: irq 84, io mem 0x12110000
[    8.789890] exynos-ohci 12120000.usb: irq 84, io mem 0x12120000
[    8.794542] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    8.794613] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[    8.794833] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    8.795309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    8.795320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.795330] usb usb1: Product: EHCI Host Controller
[    8.795339] usb usb1: Manufacturer: Linux 4.19.0-1-armmp-lpae ehci_hcd
[    8.795346] usb usb1: SerialNumber: 12110000.usb
[    8.829087] hub 1-0:1.0: USB hub found
[    8.837535] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[    8.842493] hub 1-0:1.0: 3 ports detected
[    8.847480] thermal thermal_zone0: failed to read out thermal zone (-22)
[    8.849500] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    8.860764] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    8.863271] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    8.868723] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[    8.872710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.872719] usb usb2: Product: USB Host Controller
[    8.872727] usb usb2: Manufacturer: Linux 4.19.0-1-armmp-lpae ohci_hcd
[    8.872734] usb usb2: SerialNumber: 12120000.usb
[    8.929327] thermal thermal_zone1: failed to read out thermal zone (-22)
[    8.929688] hub 2-0:1.0: USB hub found
[    8.939482] hub 2-0:1.0: 3 ports detected
[    8.943981] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[    8.950244] thermal thermal_zone2: failed to read out thermal zone (-22)
[    8.958202] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[    8.963984] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[    8.973066] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[    8.978374] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    8.978923] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[    8.995578] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
[    9.003711] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[    9.003747] usb_phy_generic usb_phy_generic.1.auto: usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[    9.003935] usb_phy_generic usb_phy_generic.2.auto: usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[    9.004039] usb_phy_generic usb_phy_generic.2.auto: Linked as a consumer to regulator.0
[    9.004543] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[    9.004643] usb_phy_generic usb_phy_generic.3.auto: Linked as a consumer to regulator.0
[    9.005888] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[    9.062880] usb_phy_generic usb_phy_generic.1.auto: Linked as a consumer to regulator.0
[    9.072958] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[    9.078459] thermal thermal_zone3: failed to read out thermal zone (-22)
[    9.086397] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[    9.091887] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    9.091901] thermal thermal_zone4: failed to read out thermal zone (-22)
[    9.097133] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 3
[    9.105230] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    9.112566] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    9.118370] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    9.127673] xhci-hcd xhci-hcd.4.auto: irq 147, io mem 0x12400000
[    9.134024] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    9.140610] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    9.145388] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[    9.153605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.163019] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[    9.170064] usb usb3: Product: xHCI Host Controller
[    9.170074] usb usb3: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[    9.177123] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[    9.181849] usb usb3: SerialNumber: xhci-hcd.4.auto
[    9.200707] hub 3-0:1.0: USB hub found
[    9.203919] hub 3-0:1.0: 1 port detected
[    9.208462] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    9.213241] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4
[    9.215664] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    9.220873] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0  SuperSpeed
[    9.236987] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.245157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    9.253179] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.260360] usb usb4: Product: xHCI Host Controller
[    9.265220] usb usb4: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[    9.271711] usb usb4: SerialNumber: xhci-hcd.4.auto
[    9.277352] hub 4-0:1.0: USB hub found
[    9.280356] hub 4-0:1.0: 1 port detected
[    9.285047] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    9.289678] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    9.298252] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    9.306712] xhci-hcd xhci-hcd.5.auto: irq 146, io mem 0x12000000
[    9.311076] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    9.313389] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    9.322532] mmc0: new high speed SDHC card at address aaaa
[    9.330556] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.330565] usb usb5: Product: xHCI Host Controller
[    9.337277] mmcblk0: mmc0:aaaa SC32G 29.7 GiB 
[    9.343215] usb usb5: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[    9.353197]  mmcblk0: p1 p2
[    9.358978] usb usb5: SerialNumber: xhci-hcd.5.auto
[    9.359796] hub 5-0:1.0: USB hub found
[    9.370382] hub 5-0:1.0: 1 port detected
[    9.374916] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    9.379705] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    9.387533] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0  SuperSpeed
[    9.394016] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.402161] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    9.410201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.417393] usb usb6: Product: xHCI Host Controller
[    9.422234] usb usb6: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[    9.428732] usb usb6: SerialNumber: xhci-hcd.5.auto
[    9.435288] hub 6-0:1.0: USB hub found
[    9.437611] hub 6-0:1.0: 1 port detected
[    9.766820] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    9.919833] usb 3-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    9.926565] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    9.933682] usb 3-1: Product: USB 10/100/1000 LAN
[    9.938356] usb 3-1: Manufacturer: Realtek
[    9.942417] usb 3-1: SerialNumber: 000001000000
[   10.465758] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[   10.470986] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[   10.502804] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[   10.906885] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   10.932298] usb 6-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.01
[   10.939025] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.946131] usb 6-1: Product: USB to ATA/ATAPI Bridge
[   10.951156] usb 6-1: Manufacturer: JMicron
[   10.955221] usb 6-1: SerialNumber: 0123456789ABCDEF
[   10.982129] SCSI subsystem initialized
[   10.991070] usbcore: registered new interface driver usb-storage
[   11.033162] scsi host0: uas
[   11.035658] usbcore: registered new interface driver uas
[   11.036976] scsi 0:0:0:0: Direct-Access     JMicron  Generic          3101 PQ: 0 ANSI: 6
[   11.557275] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[   11.563343] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   11.568896] sd 0:0:0:0: [sda] Write Protect is off
[   11.573291] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[   11.573721] sd 0:0:0:0: [sda] Disabling FUA
[   11.577445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.590937]  sda: sda1
[   11.595213] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.351081] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.665395] systemd[1]: System time before build time, advancing clock.
[   12.706458] systemd[1]: Inserted module 'autofs4'
[   12.743233] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   12.764096] systemd[1]: Detected architecture arm.
[   12.799377] systemd[1]: Set hostname to <odroid>.
[   13.182626] random: systemd: uninitialized urandom read (16 bytes read)
[   13.193837] random: systemd: uninitialized urandom read (16 bytes read)
[   13.199457] systemd[1]: Listening on Journal Audit Socket.
[   13.218953] random: systemd: uninitialized urandom read (16 bytes read)
[   13.224823] systemd[1]: Listening on Journal Socket.
[   13.260034] systemd[1]: Starting Load Kernel Modules...
[   13.280840] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   13.303041] systemd[1]: Reached target System Time Synchronized.
[   13.328568] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   13.355419] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   13.453979] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
[   14.147878] systemd-journald[215]: Received request to flush runtime journal from PID 1
[   14.392268] cpu cpu0: Linked as a consumer to regulator.44
[   14.396428] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[   14.396448] cpu cpu0: Dropping the link to regulator.44
[   14.428329] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[   14.430609] cpu cpu0: Linked as a consumer to regulator.44
[   14.441527] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[   14.451869] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[   14.459696] cpu cpu4: Linked as a consumer to regulator.40
[   14.469425] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[   14.470865] random: crng init done
[   14.478953] random: 7 urandom warning(s) missed due to ratelimiting
[   14.489224] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[   14.625063] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.637697] usbcore: registered new interface driver r8152
[   14.648922] usbcore: registered new interface driver cdc_ether
[   14.805113] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
[   15.005684] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: discard
[   15.019863] r8152 3-1:1.0 eth0: v1.09.9
[   15.225039] audit: type=1400 audit(1545418415.556:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=274 comm="apparmor_parser"
[   15.239175] audit: type=1400 audit(1545418415.556:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=274 comm="apparmor_parser"
[   15.253431] audit: type=1400 audit(1545418415.556:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=274 comm="apparmor_parser"
[   15.268156] audit: type=1400 audit(1545418415.560:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=273 comm="apparmor_parser"
[   15.455885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.294027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.299555] r8152 3-1:1.0 eth0: carrier on

--- End Message ---
--- Begin Message --- 
Hi,

this has been fixed upstream in:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/dwc3/core.c?id=a0a465569b45e3690be155c96fb54603d6904f41
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/core/phy.c?id=34c7ed72f4f04e73901ca6ec2e1db6c040495935
Which is part of Linux 5.4.0 and works for me using linux-image-5.4.0-4-armmp (5.4.19-1). 

Cheers Jochen

Attachment: signature.asc
Description: PGP signature


--- End Message ---
Reply to: