Bug#930777: linux-image-4.19.0-5-amd64: console screen not working
Package: src:linux
Version: 4.19.37-3
Severity: important
Dear Maintainer,
I have just updated my notebook (Acer C-740, originally a Chromebook) from stretch to buster.
While in stretch everything was fine, after upgrading to buster console output is broken.
I see just a black screen which flashes about every second. grub and X output are fine.
When switching from X to console, I get again the flashing. Switching back to X everything is good.
In addition I found out that the boot process takes about 10 s longer than normal.
When I start the system with the old stretch kernel which is still installed, everything
is fine.
To make grub console output work I had to add "GRUB_GFXMODE=1024x768x16" to /etc/default/grub.
However, I did this when initially installing debian some time ago (maybe jessie).
I tried the 4.19 kernel image from Sid but it did not make a difference.
I also tried to put nomodeset to the kernel command line. Then I get a readable console,
but X doesnt start.
Also tried different grub options with no success.
Regards,
Jürgen
-- Package-specific info:
** Version:
Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=52fdfb17-4761-450f-9daa-57d87b982104 ro quiet tpm_tis.interrupts=0
** Not tainted
** Kernel log:
[ 4.056855] lp: driver loaded but no devices found
[ 4.071633] ppdev: user-space parallel port driver
[ 4.085538] RPC: Registered named UNIX socket transport module.
[ 4.085540] RPC: Registered udp transport module.
[ 4.085541] RPC: Registered tcp transport module.
[ 4.085542] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.087663] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
[ 4.397884] chromeos ramoops using acpi device.
[ 4.443961] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 4.455816] elan_i2c i2c-ELAN0000:00: i2c-ELAN0000:00 supply vcc not found, using dummy regulator
[ 4.455836] elan_i2c i2c-ELAN0000:00: Linked as a consumer to regulator.0
[ 4.456731] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 4.464100] ACPI: AC Adapter [AC] (on-line)
[ 4.500842] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.561792] iTCO_vendor_support: vendor-support=0
[ 4.574024] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x005a, Firmware: 0x0006, Sample: 0x0008, IAP: 0x0009
[ 4.575535] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.575596] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1060)
[ 4.588794] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.588983] input: Elan Touchpad as /devices/pci0000:00/INT3432:00/i2c-0/i2c-ELAN0000:00/input/input4
[ 4.601308] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.601491] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.643865] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 4.643867] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.643868] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.643869] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.643870] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.694645] audit: type=1400 audit(1561028664.383:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=271 comm="apparmor_parser"
[ 4.696422] audit: type=1400 audit(1561028664.387:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=270 comm="apparmor_parser"
[ 4.719415] audit: type=1400 audit(1561028664.407:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=277 comm="apparmor_parser"
[ 4.724028] systemd-journald[204]: Received request to flush runtime journal from PID 1
[ 4.747740] audit: type=1400 audit(1561028664.435:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=285 comm="apparmor_parser"
[ 4.747745] audit: type=1400 audit(1561028664.435:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=285 comm="apparmor_parser"
[ 4.752278] audit: type=1400 audit(1561028664.443:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=276 comm="apparmor_parser"
[ 4.752282] audit: type=1400 audit(1561028664.443:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=276 comm="apparmor_parser"
[ 4.752285] audit: type=1400 audit(1561028664.443:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=276 comm="apparmor_parser"
[ 4.775381] audit: type=1400 audit(1561028664.463:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=290 comm="apparmor_parser"
[ 4.845690] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.867063] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.867067] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.867069] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.867070] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 4.867071] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 4.867073] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1a
[ 4.867075] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 4.911220] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 4.911307] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 4.911381] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 4.911447] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 4.911515] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.968908] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 4.988103] media: Linux media interface: v0.10
[ 4.988879] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 4.989808] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.989878] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 5.013743] videodev: Linux video capture interface: v2.00
[ 5.088079] Intel(R) Wireless WiFi driver for Linux
[ 5.088080] Copyright(c) 2003- 2015 Intel Corporation
[ 5.098714] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
[ 5.099106] iwlwifi 0000:01:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[ 5.168116] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b490)
[ 5.212600] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.212603] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.212605] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.212606] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.212827] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input14
[ 5.213164] usbcore: registered new interface driver uvcvideo
[ 5.213165] USB Video Class driver (1.1.1)
[ 5.239910] intel_rapl: Found RAPL domain package
[ 5.239912] intel_rapl: Found RAPL domain core
[ 5.239914] intel_rapl: Found RAPL domain dram
[ 5.311831] Bluetooth: Core ver 2.22
[ 5.311856] NET: Registered protocol family 31
[ 5.311857] Bluetooth: HCI device and connection manager initialized
[ 5.312839] Bluetooth: HCI socket layer initialized
[ 5.312842] Bluetooth: L2CAP socket layer initialized
[ 5.312857] Bluetooth: SCO socket layer initialized
[ 5.350697] usbcore: registered new interface driver btusb
[ 5.368190] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 5.375564] Bluetooth: hci0: read Intel version: 3707100180012d0d2a
[ 5.375566] Bluetooth: hci0: Intel device is already patched. patch num: 2a
[ 5.394523] iwlwifi 0000:01:00.0: base HW address: 6c:29:95:a3:0a:b6
[ 5.591203] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 11.731671] Adding 2803708k swap on /dev/sda2. Priority:-2 extents:1 across:2803708k SSFS
[ 12.099214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.099216] Bluetooth: BNEP filters: protocol multicast
[ 12.099272] Bluetooth: BNEP socket layer initialized
[ 13.182230] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.411867] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.676368] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.837110] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.185233] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.435045] wlan0: authenticate with 98:9b:cb:12:c0:1c
[ 20.443474] wlan0: send auth to 98:9b:cb:12:c0:1c (try 1/3)
[ 20.446690] wlan0: authenticated
[ 20.452662] wlan0: associate with 98:9b:cb:12:c0:1c (try 1/3)
[ 20.459171] wlan0: RX AssocResp from 98:9b:cb:12:c0:1c (capab=0x1511 status=0 aid=1)
[ 20.461066] wlan0: associated
[ 20.514686] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 98:9b:cb:12:c0:1c
[ 20.516307] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: GOOGLE
product_name: Auron_Paine
product_version: 1.0
chassis_vendor: GOOGLE
chassis_version:
bios_vendor: coreboot
bios_version:
** Loaded modules:
ctr
ccm
bnep
arc4
iwlmvm
btusb
btrtl
mac80211
btbcm
btintel
bluetooth
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
uvcvideo
videobuf2_vmalloc
iwlwifi
videobuf2_memops
videobuf2_v4l2
joydev
videobuf2_common
kvm
videodev
drbg
media
ansi_cprng
snd_hda_codec_hdmi
snd_hda_codec_realtek
irqbypass
crct10dif_pclmul
snd_hda_codec_generic
crc32_pclmul
ecdh_generic
cfg80211
snd_hda_intel
ghash_clmulni_intel
snd_hda_codec
intel_cstate
intel_uncore
intel_rapl_perf
snd_hda_core
pcspkr
snd_hwdep
sg
serio_raw
snd_pcm
iTCO_wdt
intel_pch_thermal
iTCO_vendor_support
rfkill
snd_timer
tpm_infineon
snd
tpm_tis
tpm_tis_core
soundcore
tpm
rng_core
ac
battery
elan_i2c
dw_dmac
evdev
dw_dmac_core
pcc_cpufreq
chromeos_pstore
parport_pc
ppdev
sunrpc
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
sd_mod
i915
video
i2c_algo_bit
ahci
drm_kms_helper
libahci
libata
drm
xhci_pci
xhci_hcd
scsi_mod
crc32c_intel
usbcore
lpc_ich
usb_common
fan
thermal
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 08)
Subsystem: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics [8086:1606] (rev 08) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation HD Graphics [8086:1606]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 08)
Subsystem: Intel Corporation Broadwell-U Audio Controller [8086:160c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e1118000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 41
Region 0: Memory at e1100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e111c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 [8086:9c90] (rev e3) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e1000000-e10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc5] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at 1860 [size=8]
Region 1: I/O ports at 1870 [size=4]
Region 2: I/O ports at 1868 [size=8]
Region 3: I/O ports at 1874 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at e1110000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 17
Region 0: Memory at e1126000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
01:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev cb)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:5070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 04f2:b490 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-18
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-amd64 is related to:
ii firmware-amd-graphics 20190114-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190114-1
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-1
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: