Bug#930698: linux-image-4.19.0-5-rt-arm64: Kernel OOPs if Connman is run on this kernel
Package: linux-image-4.19.0-5-rt-arm64
Version: 4.19.37-3
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Install linux-image-4.19.0-5-rt-arm64
I installed the unofficial image from debian arm64 on my Raspi 3. Then i played
arround. all seemned stable. Then i installed connman and the system started to
OOPs.
It does not always occur, just on ever 2 or 3rd boot.
See attached bug.log that i captures through tty.
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amrm64
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.0-5-rt-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP PREEMPT RT Debian 4.19.37-3 (2019-05-15)
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000033400000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x333df240-0x333e0a7f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4cc with crng_init=0
[ 0.000000] percpu: Embedded 25 pages/cpu s64512 r8192 d29696 u102400
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 843419
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0x8ea586f8 bcm2709.uart_clock=48000000 smsc95xx.macaddr=B8:27:EB:A5:86
:F8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=128M rootwait
[ 0.000000] Memory: 770152K/970752K available (8764K kernel code, 1674K rwdata, 2808K rodata, 4736K init, 731K bss, 69528K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 33079 entries in 130 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] No expedited grace period (rcu_normal_after_boot).
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000199] Console: colour dummy device 80x25
[ 0.001147] console [tty0] enabled
[ 0.001289] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001302] pid_max: default: 32768 minimum: 301
[ 0.001547] Security Framework initialized
[ 0.001555] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001699] AppArmor: AppArmor initialized
[ 0.004586] Dentry cache hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.007379] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.007496] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.007527] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.032214] ASID allocator initialised with 32768 entries
[ 0.048190] rcu: Hierarchical SRCU implementation.
[ 0.074903] EFI services will not be available.
[ 0.084373] smp: Bringing up secondary CPUs ...
[ 0.140748] Detected VIPT I-cache on CPU1
[ 0.140818] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.196973] Detected VIPT I-cache on CPU2
[ 0.197026] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.253225] Detected VIPT I-cache on CPU3
[ 0.253275] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.253550] smp: Brought up 1 node, 4 CPUs
[ 0.253700] SMP: Total of 4 processors activated.
[ 0.253733] CPU features: detected: 32-bit EL0 Support
[ 0.257578] CPU: All CPU(s) started at EL2
[ 0.257640] alternatives: patching kernel code
[ 0.260081] devtmpfs: initialized
[ 0.277573] Registered cp15_barrier emulation handler
[ 0.277628] Registered setend emulation handler
[ 0.278498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.278768] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.286088] pinctrl core: initialized pinctrl subsystem
[ 0.288115] DMI not present or invalid.
[ 0.289121] NET: Registered protocol family 16
[ 0.294349] audit: initializing netlink subsys (disabled)
[ 0.294782] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1
[ 0.297028] cpuidle: using governor ladder
[ 0.297391] cpuidle: using governor menu
[ 0.298121] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.298167] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.303575] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.304278] Serial: AMBA PL011 UART driver
[ 0.343115] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.345945] ACPI: Interpreter disabled.
[ 0.347227] vgaarb: loaded
[ 0.347816] pps_core: LinuxPPS API ver. 1 registered
[ 0.347849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.347915] PTP clock support registered
[ 0.347992] EDAC MC: Ver: 3.0.0
[ 0.351654] clocksource: Switched to clocksource arch_sys_counter
[ 0.561152] VFS: Disk quotas dquot_6.6.0
[ 0.561346] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.563964] AppArmor: AppArmor Filesystem Enabled
[ 0.565139] simple-framebuffer 3e898000.framebuffer: framebuffer at 0x3e898000, 0x362400 bytes, mapped to 0x(____ptrval____)
[ 0.565193] simple-framebuffer 3e898000.framebuffer: format=r5g6b5, mode=1680x1050x16, linelength=3360
[ 0.586439] Console: switching to colour frame buffer device 210x65
[ 0.606702] simple-framebuffer 3e898000.framebuffer: fb0: simplefb registered!
[ 0.606992] pnp: PnP ACPI: disabled
[ 0.629097] NET: Registered protocol family 2
[ 0.630598] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 32768 bytes)
[ 0.630905] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.631844] TCP bind hash table entries: 8192 (order: 6, 458752 bytes)
[ 0.632476] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.633089] UDP hash table entries: 512 (order: 4, 65536 bytes)
[ 0.633390] UDP-Lite hash table entries: 512 (order: 4, 65536 bytes)
[ 0.634111] NET: Registered protocol family 1
[ 0.634279] NET: Registered protocol family 44
[ 0.634976] Unpacking initramfs...
[ 4.327710] Freeing initrd memory: 33592K
[ 4.347136] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 4.347508] kvm [1]: 8-bit VMID
[ 4.348660] kvm [1]: Hyp mode initialized successfully
[ 4.356962] Initialise system trusted keyrings
[ 4.357235] Key type blacklist registered
[ 4.357733] workingset: timestamp_bits=44 max_order=18 bucket_order=0
[ 4.376300] zbud: loaded
[ 4.378472] pstore: using deflate compression
[ 5.553553] Key type asymmetric registered
[ 5.553693] Asymmetric key parser 'x509' registered
[ 5.553947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 5.554444] io scheduler noop registered
[ 5.554551] io scheduler deadline registered (default)
[ 5.555071] io scheduler cfq registered
[ 5.555175] io scheduler mq-deadline registered (default)
[ 5.567784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.588158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.592271] console [ttyS1] disabled
[ 5.592462] 3f215040.serial: ttyS1 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 6.351305] console [ttyS1] enabled
[ 6.356439] Serial: AMBA driver
[ 6.360500] msm_serial: driver initialized
[ 6.366371] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 6.373937] mousedev: PS/2 mouse device common for all mice
[ 6.385619] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 6.395539] NET: Registered protocol family 10
[ 6.469918] Segment Routing with IPv6
[ 6.479920] mip6: Mobile IPv6
[ 6.488945] NET: Registered protocol family 17
[ 6.499794] mpls_gso: MPLS GSO support
[ 6.511787] registered taskstats version 1
[ 6.521914] Loading compiled-in X.509 certificates
[ 6.797717] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 6.812705] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 6.825425] zswap: loaded using pool lzo/zbud
[ 6.836214] AppArmor: AppArmor sha1 policy hashing enabled
[ 6.867319] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2
[ 6.887331] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-02-12 19:42
[ 6.912134] hctosys: unable to open rtc device (rtc0)
[ 6.945883] Freeing unused kernel memory: 4736K
[ 6.956763] Run /init as init process
Loading, please wait...
Starting version 241
[ 7.788071] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 7.802329] usb_phy_generic phy: Linked as a consumer to regulator.0
[ 7.895568] sdhci: Secure Digital Host Controller Interface driver
[ 7.902487] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 7.942082] sdhci: Copyright(c) Pierre Ossman
[ 7.979908] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.997823] usbcore: registered new interface driver usbfs
[ 7.997979] usbcore: registered new interface driver hub
[ 7.998252] usbcore: registered new device driver usb
[ 8.003185] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 8.095104] mmc0: host does not support reading read-only switch, assuming write-enable
[ 8.099515] sdhci-iproc 3f300000.sdhci: allocated mmc-pwrseq
[ 8.117597] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator
[ 8.118283] dwc2 3f980000.usb: Linked as a consumer to regulator.0
[ 8.118308] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator
[ 8.147624] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 8.165405] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 8.167410] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.169402] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.172269] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter lpm=1
[ 8.172283] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1
[ 8.172295] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter besl=1
[ 8.172307] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1
[ 8.172912] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.174775] dwc2 3f980000.usb: DWC OTG Controller
[ 8.174824] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 8.175320] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 8.176050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 8.176064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.176076] usb usb1: Product: DWC OTG Controller
[ 8.176088] usb usb1: Manufacturer: Linux 4.19.0-5-rt-arm64 dwc2_hsotg
[ 8.176100] usb usb1: SerialNumber: 3f980000.usb
[ 8.177850] hub 1-0:1.0: USB hub found
[ 8.177946] hub 1-0:1.0: 1 port detected
[ 8.249616] random: fast init done
[ 8.288608] mmc1: new high speed SDIO card at address 0001
[ 8.421967] mmc0: new high speed SDHC card at address 0001
[ 8.436401] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 8.455272] mmcblk0: p1 p2
[ 8.460182] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory
[ 8.462532] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 8.462559] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 8.465150] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 8.465450] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 8.467138] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 8.467263] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 8.468237] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 8.469003] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 8.469777] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 8.497182] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 8.497212] fb: switching to vc4drmfb from simple
[ 8.575706] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.624883] Console: switching to colour dummy device 80x25
[ 8.635532] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 8.642306] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.649048] [drm] Driver supports precise vblank timestamp query.
[ 8.695316] Console: switching to colour frame buffer device 210x65
[ 8.765662] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[ 8.784451] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 8.793144] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.802984] hub 1-1:1.0: USB hub found
[ 8.807381] hub 1-1:1.0: 5 ports detected
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... [ 9.107837] usb 1-1.1: new high-speed USB device number 3 using dwc2
fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -y -C0 /dev/mmcblk0p2
e2fsck 1.44.5 (15-Dec-2018)
[ 9.216538] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 9.225417] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
RASPIROOT: recovering journal
Setting free inodes count to 1760533 (was 1760536)
Setting free blocks count to 6519028 (was 6519025)
RASPIROOT: clean, 177179/1937712 files, 1219340/7738368 blocks
done.
[ 9.763731] usb 1-1.2: new full-speed USB device number 4 using dwc2
[ 9.779580] random: crng init done
[ 9.871817] usb 1-1.2: New USB device found, idVendor=1997, idProduct=2433, bcdDevice= 1.06
[ 9.880787] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.888570] usb 1-1.2: Product: mini keyboard
[ 9.893212] usb 1-1.2: Manufacturer:
[ 9.952968] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.969093] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
done.
[ 9.991456] usbcore: registered new interface driver usbhid
[ 9.997456] usbhid: USB HID core driver
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... [ 10.024528] input: mini keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1997:2433.0001/input/input0
[ 10.097495] hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [ mini keyboard] on usb-3f980000.usb-1.2/input0
[ 10.113106] input: mini keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1997:2433.0002/input/input1
[ 10.126792] input: mini keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1997:2433.0002/input/input2
[ 10.200447] input: mini keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1997:2433.0002/input/input3
[ 10.215047] hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [ mini keyboard] on usb-3f980000.usb-1.2/input1
done.
[ 11.538959] systemd[1]: System time before build time, advancing clock.
[ 11.616080] systemd[1]: Inserted module 'autofs4'
[ 11.713829] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 11.764721] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 10 (buster)!
[ 11.812460] systemd[1]: Set hostname to <rpi3>.
[ 12.818731] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 12.843455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 12.880529] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 12.916729] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 12.956997] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 13.009333] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.054186] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
Starting Create list of re…odes for the current kernel...
Starting Remount Root and Kernel File Systems...
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Created slice system-systemd\x2dfsck.slice.
Starting Set the console keyboard layout...
[ OK ] Created slice system-getty.slice.
[ 13.239921] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 13.248643] rtc-ds1307: probe of 1-0068 failed with error -121
[ 13.248709] i2c i2c-1: new_device: Instantiated device ds1307 at 0x68
Starting HWClock at the I2C Bus of the Raspberry pi...
Mounting Kernel Debug File System...
[ OK ] Reached target Remote File Systems.
Mounting POSIX Message Queue File System...
Mounting Huge Pages File System...
[ OK ] Listening on Journal Audit Socket.
Starting Load Kernel Modules...
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
[ OK ] Listening on udev Kernel Socket.
Starting udev Coldplug all Devices...
[ OK ] Started Create list of req… nodes for the current kernel.
[ OK ] Started Remount Root and Kernel File Systems.
[FAILED] Failed to start HWClock at…e I2C Bus of the Raspberry pi.
See 'systemctl status hwclock-pi.service' for details.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
Activating swap /swapfile...
Starting Load/Save Random Seed...
Starting Create System Users...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Set the console keyboard layout.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
Starting Show Plymouth Boot Screen...
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Activated swap /swapfile.
[ OK ] Reached target Swap.
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Found device /dev/ttyS1.
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/disk/by-label/RASPIFIRM.
Starting File System Check…dev/disk/by-label/RASPIFIRM...
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started File System Check … /dev/disk/by-label/RASPIFIRM.
Mounting /boot/firmware...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Mounted /boot/firmware.
[ OK ] Reached target Local File Systems.
Starting Load AppArmor profiles...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Set console font and keymap...
Starting Create Volatile Files and Directories...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Set console font and keymap.
[ OK ] Started Helper to synchronize boot up for ifupdown.
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Load AppArmor profiles.
Starting Raise network interfaces...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Daily man-db regeneration.
[ OK ] Reached target Basic System.
Starting Telephony service...
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
Starting Disk Manager...
Starting Login Service...
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
Starting DUN service...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Started Login Service.
[ OK ] Started Telephony service.
[ OK ] Started DUN service.
[ OK ] Started Connection service.
Starting Wait for network to be configured by ConnMan...
[ 22.302551] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 22.302559] Modules linked in: iptable_filter ansi_cprng(+) ecdh_generic(+) ip6t_REJECT nf_reject_ipv6 nft_counter ipt_REJECT nf_reject_ipv4 xt_tcpudp xt_comment nft_compat nf_tables nfnetlink nls_ascii nls_cp437 vfat fat joydev evdev smsc95xx usbnet brcmfmac mii brcmutil cfg80211 rfkill pwm_bcm2835 bcm2835_thermal bcm2835_rng rng_core vchiq(C) bcm2835_wdt leds_gpio ip_tables x_tables autofs4 hid_generic usbhid hid ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb vc4 snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore cec drm_kms_helper drm sdhci_iproc dwc2 udc_core usbcore sdhci_pltfm usb_common sdhci i2c_bcm2835 bcm2835 phy_generic
[ 22.302786] Process connmand (pid: 398, stack limit = 0x00000000238eacd6)
[ 22.302799] CPU: 3 PID: 398 Comm: connmand Tainted: G C 4.19.0-5-rt-arm64 #1 Debian 4.19.37-3
[ 22.302803] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 22.302811] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 22.302827] pc : alloc_counters.isra.4+0xc8/0x160 [ip_tables]
[ 22.302837] lr : alloc_counters.isra.4+0x68/0x160 [ip_tables]
[ 22.302843] sp : ffff00000b98bbf0
[ 22.302847] x29: ffff00000b98bbf0 x28: ffffc0096dd49f00
[ 22.302857] x27: 0000000000000000 x26: 0000000000000000
[ 22.302866] x25: ffff2e8975e8f204 x24: ffff2e8975e8e778
[ 22.302876] x23: ffffc0096fe8e840 x22: ffff2e8975e8efe8
[ 22.302886] x21: ffff2e8875b2ed80 x20: ffffc0096fe8e800
[ 22.302895] x19: ffff0000094b5000 x18: 0000000000000000
[ 22.302907] x17: 0000000080000000 x16: ffff2e89756dbcc8
[ 22.302916] x15: 0000000000000000 x14: 0000000000000000
[ 22.302925] x13: 0000000000000000 x12: 0140000000000000
[ 22.302934] x11: 0040000000000001 x10: ffff0000096b5000
[ 22.302943] x9 : 0000000000000000 x8 : 0000000000000000
[ 22.302953] x7 : 0000000000000000 x6 : ffff0000494b5000
[ 22.302962] x5 : 0000000000000000 x4 : 0000917ffd855000
[ 22.302971] x3 : ffffc0096fe8e840 x2 : ffffc00873383d80
[ 22.302980] x1 : ffff7dffbff9d000 x0 : 0000000000000000
[ 22.302989] Call trace:
[ 22.302999] alloc_counters.isra.4+0xc8/0x160 [ip_tables]
[ 22.303008] do_ipt_get_ctl+0x24c/0x400 [ip_tables]
[ 22.303025] nf_getsockopt+0x64/0xa8
[ 22.303033] ip_getsockopt+0x108/0x178
[ 22.303041] raw_getsockopt+0x88/0xb0
[ 22.303052] sock_common_getsockopt+0x54/0x68
[ 22.303060] __arm64_sys_getsockopt+0x90/0xf8
[ 22.303073] el0_svc_common+0x94/0x108
[ 22.303081] el0_svc_handler+0x38/0x78
[ 22.303088] el0_svc+0x8/0xc
[ 22.303099] Code: d50339bf b9400046 6b0400df 54000120 (b9400044)
[ 22.345255] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 22.969312] ---[ end trace 0000000000000002 ]---
Starting Authorization Manager...
[ OK ] Started Authorization Manager.
[ 23.043461] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 23.067974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.089972] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ OK ] Started Disk Manager.
[ OK ] Stopped Connection service.
Starting Connection service...
[ OK ] Started Connection service.
[ 23.378718] Bluetooth: Core ver 2.22
[ 23.394727] NET: Registered protocol family 31
[ 23.411583] Bluetooth: HCI device and connection manager initialized
[ 23.430443] Bluetooth: HCI socket layer initialized
[ 23.447729] Bluetooth: L2CAP socket layer initialized
[ 23.465282] Bluetooth: SCO socket layer initialized
[ 24.633684] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
Starting Terminate Plymouth Boot Screen...
Starting Hold until boot process finishes up...
Reply to: