Bug#930337: linux-image-4.19.0-5-amd64: mount fails when deprecated 'nobarrier' option is used in fstab
Package: src:linux
Version: 4.19.37-3
Severity: critical
Justification: breaks the whole system
Hi!
Just upgraded from stretch to buster to test the whole upgrade thing.
In stretch I was using "nobarrier" option to mount my XFS filesystems. As described in https://patchwork.kernel.org/patch/10487561/ (first hit on Google search for "xfs nobarrier deprecated") this option no longer exists in linux-image 4.19, thus failing the mount of those filesystems that have a nobarrier option set. If this option is being set on / it might render the system unusable, especially for not-so-experienced users.
Even when not used on rootfs but only on other filesystems such /home, /var or whatever, you'll get dropped to maintenance shell during boot.
>From my limited point of view it should be safe to remove that option from /etc/fstab during upgrade automatically, but I can understand when you decide to refrain from doing so, of course. But at least you should issue a clear and prominent warning to the user during upgrade when there is a filesystem with nobarrier option in /etc/fstab.
Ingo
-- Package-specific info:
** Version:
Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-5-amd64 root=/dev/mapper/vg-sys ro matroxfb:mode=1024x768 cgroup_enable=memory swapaccount=1 matroxfb:mode=1024x768
** Not tainted
** Kernel log:
[ 59.600616] Console: switching to colour dummy device 80x25
[ 59.607426] [TTM] Zone kernel: Available graphics memory: 12328272 kiB
[ 59.607427] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 59.607428] [TTM] Initializing pool allocator
[ 59.607432] [TTM] Initializing DMA pool allocator
[ 59.618815] IPMI System Interface driver.
[ 59.618831] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 59.618832] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 59.618833] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 59.618850] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 59.618868] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 59.618869] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 59.618869] ipmi_si: Adding ACPI-specified kcs state machine
[ 59.618910] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 59.635575] fbcon: mgadrmfb (fb0) is primary device
[ 59.635631] Console: switching to colour frame buffer device 128x48
[ 59.894060] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
[ 59.943695] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0631, dev_id: 0x20)
[ 59.996027] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 60.016048] IPMI SSIF Interface driver
[ 60.080153] mgag200 0000:09:03.0: fb0: mgadrmfb frame buffer device
[ 60.106126] [drm] Initialized mgag200 1.0.0 20110418 for 0000:09:03.0 on minor 0
[ 60.127799] intel_rapl: Found RAPL domain package
[ 60.127801] intel_rapl: Found RAPL domain core
[ 60.127804] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 60.648856] XFS (dm-1): Mounting V4 Filesystem
[ 60.757000] XFS (dm-13): Mounting V5 Filesystem
[ 60.827464] XFS (dm-2): Mounting V5 Filesystem
[ 60.942871] XFS (dm-4): Mounting V5 Filesystem
[ 61.226243] XFS (dm-9): Mounting V4 Filesystem
[ 61.242370] XFS (dm-7): Mounting V5 Filesystem
[ 61.748476] XFS (dm-6): Mounting V5 Filesystem
[ 61.761966] XFS (dm-15): Mounting V5 Filesystem
[ 61.849682] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
[ 61.871454] XFS (dm-2): Ending clean mount
[ 61.903329] XFS (dm-11): Mounting V4 Filesystem
[ 61.937097] XFS (dm-4): Ending clean mount
[ 61.999635] XFS (dm-16): Mounting V5 Filesystem
[ 62.133219] XFS (dm-7): Ending clean mount
[ 62.136097] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 62.185194] XFS (dm-13): Ending clean mount
[ 62.277427] XFS (dm-1): Ending clean mount
[ 62.467263] XFS (dm-14): Mounting V5 Filesystem
[ 62.557575] XFS (dm-15): Ending clean mount
[ 62.577938] XFS (dm-6): Ending clean mount
[ 62.616781] XFS (dm-9): Ending clean mount
[ 63.004229] XFS (dm-16): Ending clean mount
[ 63.198045] XFS (dm-14): Ending clean mount
[ 63.401731] XFS (dm-11): Ending clean mount
[ 63.548116] XFS (dm-3): Mounting V4 Filesystem
[ 63.578569] systemd-journald[613]: Received request to flush runtime journal from PID 1
[ 63.933853] XFS (dm-3): Ending clean mount
[ 65.087518] tun: Universal TUN/TAP device driver, 1.6
[ 65.372559] Process accounting resumed
[ 66.151406] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 66.187959] br0: port 1(eth0) entered blocking state
[ 66.187961] br0: port 1(eth0) entered disabled state
[ 66.188009] device eth0 entered promiscuous mode
[ 66.275521] br0: port 2(eth1) entered blocking state
[ 66.275522] br0: port 2(eth1) entered disabled state
[ 66.275579] device eth1 entered promiscuous mode
[ 66.360052] br0: port 3(eth2) entered blocking state
[ 66.360054] br0: port 3(eth2) entered disabled state
[ 66.360126] device eth2 entered promiscuous mode
[ 66.442839] br0: port 4(eth3) entered blocking state
[ 66.442842] br0: port 4(eth3) entered disabled state
[ 66.442911] device eth3 entered promiscuous mode
[ 66.529542] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 69.595157] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 69.595513] br0: port 3(eth2) entered blocking state
[ 69.595515] br0: port 3(eth2) entered forwarding state
[ 69.595652] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 72.997788] Fusion MPT misc device (ioctl) driver 3.04.20
[ 72.997820] mptctl: Registered with Fusion MPT base driver
[ 72.997821] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 80.237910] mgag200 0000:09:03.0: Video card doesn't support cursors with partial transparency.
[ 80.237913] mgag200 0000:09:03.0: Not enabling hardware cursor.
[ 250.249857] sd 6:0:12:0: [sde] Synchronizing SCSI cache
[ 408.830822] scsi 6:0:12:0: Direct-Access IFT A08U-C2412 342L PQ: 0 ANSI: 5
[ 408.870341] scsi target6:0:12: Beginning Domain Validation
[ 408.877718] scsi 6:0:12:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
[ 408.879388] scsi target6:0:12: Ending Domain Validation
[ 408.879454] scsi target6:0:12: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS PCOMP (6.25 ns, offset 127)
[ 408.880704] sd 6:0:12:0: Attached scsi generic sg5 type 0
[ 408.881011] sd 6:0:12:0: [sde] physical block alignment offset: 4251648
[ 408.881970] sd 6:0:12:0: [sde] 7812988928 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 408.881972] sd 6:0:12:0: [sde] 1048576-byte physical blocks
[ 409.132582] sd 6:0:12:0: [sde] Write Protect is off
[ 409.132585] sd 6:0:12:0: [sde] Mode Sense: 9b 00 00 08
[ 409.383454] sd 6:0:12:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 409.675038] sd 6:0:12:0: [sde] Attached SCSI disk
[ 502.502760] scsi 6:0:12:1: Direct-Access IFT A08U-C2412 342L PQ: 0 ANSI: 3
[ 502.502974] sd 6:0:12:1: Attached scsi generic sg6 type 0
[ 502.503139] sd 6:0:12:1: Power-on or device reset occurred
[ 502.753653] sd 6:0:12:1: [sdf] 3904954368 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 503.008683] sd 6:0:12:1: [sdf] Write Protect is off
[ 503.008686] sd 6:0:12:1: [sdf] Mode Sense: 9b 00 00 08
[ 503.259443] sd 6:0:12:1: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 503.285737] sd 6:0:12:1: [sdf] Attached SCSI disk
[ 3306.867571] fuse init (API version 7.27)
** Model information
sys_vendor: Supermicro
product_name: X9SCI/X9SCA
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 2.3
board_vendor: Supermicro
board_name: X9SCI/X9SCA
board_version: 1.01
** Loaded modules:
fuse
dm_mirror
dm_region_hash
dm_log
nf_conntrack_netlink
tcp_diag
inet_diag
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
mptctl
ipt_MASQUERADE
xt_state
xt_conntrack
xt_nat
nft_counter
xt_tcpudp
nft_compat
nft_chain_route_ipv4
nft_chain_nat_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
nfnetlink
bridge
stp
llc
tun
ext4
crc16
mbcache
jbd2
fscrypto
ecb
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
ipmi_ssif
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
intel_cstate
ipmi_si
mgag200
serio_raw
intel_uncore
ipmi_devintf
pcspkr
mei_me
sg
intel_rapl_perf
joydev
evdev
ipmi_msghandler
ttm
iTCO_wdt
ie31200_edac
mei
iTCO_vendor_support
button
pcc_cpufreq
nct6775
jc42
w83627ehf
hwmon_vid
coretemp
softdog
hangcheck_timer
i915
video
drm_kms_helper
drm
i2c_algo_bit
sunrpc
ac
psmouse
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
xfs
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
raid10
raid1
md_mod
sr_mod
hid_generic
cdrom
sd_mod
usbhid
hid
mptspi
ahci
crc32c_intel
ehci_pci
mptscsih
libahci
ehci_hcd
mptbase
aesni_intel
libata
scsi_transport_spi
aes_x86_64
usbcore
crypto_simd
cryptd
usb_common
lpc_ich
scsi_mod
e1000e
i2c_i801
glue_helper
thermal
fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] (rev 09)
Subsystem: Super Micro Computer Inc Xeon E3-1200 v2/Ivy Bridge DRAM Controller [15d9:0631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ie31200_edac
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: df100000-df3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:015d] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family MEI Controller [15d9:0631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a2ff03000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel modules: mei_me
00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04)
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family MEI Controller [15d9:0631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: Memory at a2ff02000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [15d9:0631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df802000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df700000-df7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: df600000-df6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: df500000-df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: df400000-df4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [15d9:0631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df801000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Memory behind bridge: de800000-df0fffff
Prefetchable memory behind bridge: 00000000dd000000-00000000ddffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05)
Subsystem: Super Micro Computer Inc C204 Chipset LPC Controller [15d9:0631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [15d9:0631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 37
Region 0: I/O ports at f050 [size=8]
Region 1: I/O ports at f040 [size=4]
Region 2: I/O ports at f030 [size=8]
Region 3: I/O ports at f020 [size=4]
Region 4: I/O ports at f000 [size=32]
Region 5: Memory at df800000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Super Micro Computer Inc 6 Series/C200 Series Chipset Family SMBus Controller [15d9:0631]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at a2ff01000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0580 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge [10b5:8114] (rev bc) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df300000 (32-bit, non-prefetchable) [size=8K]
Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: df100000-df2fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev c1)
Subsystem: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:50c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4000ns min, 1500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at df220000 (64-bit, non-prefetchable) [size=128K]
Region 3: Memory at df200000 (64-bit, non-prefetchable) [size=128K]
Expansion ROM at df100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptspi
Kernel modules: mptspi
05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df700000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at df720000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
06:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at df600000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at df620000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
07:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at b000 [size=32]
Region 3: Memory at df520000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
08:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at df400000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Region 3: Memory at df420000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
09:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc MGA G200eW WPCM450 [15d9:0631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dd000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: mgag200
Kernel modules: mgag200
** USB devices:
Bus 002 Device 004: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_DE:en_US:en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-amd64 recommends:
iu apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-18
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: