Bug#929885: Hangup log
Additionnaly, I attach here the log (dmesg) of the hangup (triggered by
lauching xine-ui).
[ 0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=f45bd6d5-429c-44ef-8981-6ab0feba8dfa ro quiet
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca867fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca868000-0x00000000cab43fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cab44000-0x00000000cab53fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cab54000-0x00000000cb959fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb95a000-0x00000000cca36fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cca37000-0x00000000cca37fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cca38000-0x00000000ccc3dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccc3e000-0x00000000cd082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd083000-0x00000000cd7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd7f4000-0x00000000cd7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A99FX PRO R2.0, BIOS 2201 11/22/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4013.276 MHz processor
[ 0.002933] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002935] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.010757] AGP: No AGP bridge found
[ 0.010827] last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[ 0.010830] MTRR default type: uncachable
[ 0.010831] MTRR fixed ranges enabled:
[ 0.010832] 00000-9FFFF write-back
[ 0.010833] A0000-BFFFF write-through
[ 0.010833] C0000-CDFFF write-protect
[ 0.010834] CE000-EBFFF uncachable
[ 0.010835] EC000-FFFFF write-protect
[ 0.010835] MTRR variable ranges enabled:
[ 0.010836] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.010837] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.010838] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.010839] 3 base 0000CD800000 mask FFFFFF800000 uncachable
[ 0.010840] 4 base 0000CE000000 mask FFFFFE000000 uncachable
[ 0.010840] 5 disabled
[ 0.010840] 6 disabled
[ 0.010841] 7 disabled
[ 0.010842] TOM2: 000000012f000000 aka 4848M
[ 0.011649] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.011715] e820: update [mem 0xcd800000-0xffffffff] usable ==> reserved
[ 0.011720] last_pfn = 0xcd800 max_arch_pfn = 0x400000000
[ 0.048672] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.048674] Using GB pages for direct mapping
[ 0.048676] BRK [0x5a201000, 0x5a201fff] PGTABLE
[ 0.048678] BRK [0x5a202000, 0x5a202fff] PGTABLE
[ 0.048679] BRK [0x5a203000, 0x5a203fff] PGTABLE
[ 0.048725] BRK [0x5a204000, 0x5a204fff] PGTABLE
[ 0.048726] BRK [0x5a205000, 0x5a205fff] PGTABLE
[ 0.048825] BRK [0x5a206000, 0x5a206fff] PGTABLE
[ 0.049269] BRK [0x5a207000, 0x5a207fff] PGTABLE
[ 0.049381] BRK [0x5a208000, 0x5a208fff] PGTABLE
[ 0.049541] BRK [0x5a209000, 0x5a209fff] PGTABLE
[ 0.049646] BRK [0x5a20a000, 0x5a20afff] PGTABLE
[ 0.049727] RAMDISK: [mem 0x337c9000-0x35bdbfff]
[ 0.049734] ACPI: Early table checksum verification disabled
[ 0.062929] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.062932] ACPI: XSDT 0x00000000CAB4B070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.062936] ACPI: FACP 0x00000000CAB52130 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.062940] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[ 0.062943] ACPI: DSDT 0x00000000CAB4B168 006FC3 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.062946] ACPI: FACS 0x00000000CB954F80 000040
[ 0.062948] ACPI: APIC 0x00000000CAB52240 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.062950] ACPI: FPDT 0x00000000CAB522E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.062953] ACPI: MCFG 0x00000000CAB52328 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.062955] ACPI: HPET 0x00000000CAB52368 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.062957] ACPI: SSDT 0x00000000CAB52430 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.062959] ACPI: BGRT 0x00000000CAB523F8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.062965] ACPI: Local APIC address 0xfee00000
[ 0.063070] No NUMA configuration found
[ 0.063071] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[ 0.063074] NODE_DATA(0) allocated [mem 0x12eff9000-0x12effdfff]
[ 0.063097] Zone ranges:
[ 0.063098] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.063099] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.063100] Normal [mem 0x0000000100000000-0x000000012effffff]
[ 0.063101] Device empty
[ 0.063102] Movable zone start for each node
[ 0.063102] Early memory node ranges
[ 0.063103] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.063103] node 0: [mem 0x0000000000100000-0x00000000ca867fff]
[ 0.063104] node 0: [mem 0x00000000cca37000-0x00000000cca37fff]
[ 0.063104] node 0: [mem 0x00000000ccc3e000-0x00000000cd082fff]
[ 0.063105] node 0: [mem 0x00000000cd7f4000-0x00000000cd7fffff]
[ 0.063106] node 0: [mem 0x0000000100001000-0x000000012effffff]
[ 0.063108] Reserved but unavailable: 99 pages
[ 0.063109] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
[ 0.063111] On node 0 totalpages: 1023062
[ 0.063111] DMA zone: 64 pages used for memmap
[ 0.063112] DMA zone: 21 pages reserved
[ 0.063112] DMA zone: 3997 pages, LIFO batch:0
[ 0.063188] DMA32 zone: 12915 pages used for memmap
[ 0.063188] DMA32 zone: 826554 pages, LIFO batch:63
[ 0.079407] Normal zone: 3008 pages used for memmap
[ 0.079409] Normal zone: 192511 pages, LIFO batch:63
[ 0.083310] ACPI: PM-Timer IO Port: 0x808
[ 0.083313] ACPI: Local APIC address 0xfee00000
[ 0.083318] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.083325] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.083327] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.083329] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.083330] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.083331] ACPI: IRQ0 used by override.
[ 0.083332] ACPI: IRQ9 used by override.
[ 0.083333] Using ACPI (MADT) for SMP configuration information
[ 0.083334] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.083339] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.083357] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.083358] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.083358] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.083359] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.083359] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.083361] PM: Registered nosave memory: [mem 0xca868000-0xcab43fff]
[ 0.083361] PM: Registered nosave memory: [mem 0xcab44000-0xcab53fff]
[ 0.083361] PM: Registered nosave memory: [mem 0xcab54000-0xcb959fff]
[ 0.083362] PM: Registered nosave memory: [mem 0xcb95a000-0xcca36fff]
[ 0.083363] PM: Registered nosave memory: [mem 0xcca38000-0xccc3dfff]
[ 0.083364] PM: Registered nosave memory: [mem 0xcd083000-0xcd7f3fff]
[ 0.083365] PM: Registered nosave memory: [mem 0xcd800000-0xfebfffff]
[ 0.083366] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.083366] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.083367] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.083367] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.083368] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.083368] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.083368] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.083369] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.083369] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.083370] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.083370] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.083371] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.083371] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.083371] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.083373] [mem 0xcd800000-0xfebfffff] available for PCI devices
[ 0.083374] Booting paravirtualized kernel on bare hardware
[ 0.083376] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.167982] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.168483] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u262144
[ 0.168490] pcpu-alloc: s143256 r8192 d28776 u262144 alloc=1*2097152
[ 0.168491] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.168511] Built 1 zonelists, mobility grouping on. Total pages: 1007054
[ 0.168512] Policy zone: Normal
[ 0.168513] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=f45bd6d5-429c-44ef-8981-6ab0feba8dfa ro quiet
[ 0.179706] AGP: Checking aperture...
[ 0.187527] AGP: No AGP bridge found
[ 0.187530] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.187531] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.187532] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.187532] AGP: This costs you 64MB of RAM
[ 0.187534] AGP: Mapping aperture over RAM [mem 0xc0000000-0xc3ffffff] (65536KB)
[ 0.187537] PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
[ 0.203437] Memory: 3832000K/4092248K available (10252K kernel code, 1242K rwdata, 3180K rodata, 1580K init, 2296K bss, 260248K reserved, 0K cma-reserved)
[ 0.203533] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.203540] ftrace: allocating 31824 entries in 125 pages
[ 0.216880] rcu: Hierarchical RCU implementation.
[ 0.216881] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.216882] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.219694] NR_IRQS: 33024, nr_irqs: 1032, preallocated irqs: 16
[ 0.219987] spurious 8259A interrupt: IRQ7.
[ 0.226345] Console: colour VGA+ 80x25
[ 0.226349] console [tty0] enabled
[ 0.226364] ACPI: Core revision 20180810
[ 0.226498] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.226506] hpet clockevent registered
[ 0.226509] APIC: Switch to symmetric I/O mode setup
[ 0.226946] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.246511] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39d959e53c6, max_idle_ns: 440795242685 ns
[ 0.246520] Calibrating delay loop (skipped), value calculated using timer frequency.. 8026.55 BogoMIPS (lpj=16053104)
[ 0.246521] pid_max: default: 32768 minimum: 301
[ 0.246549] Security Framework initialized
[ 0.246550] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.246565] AppArmor: AppArmor initialized
[ 0.247392] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.247796] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.247820] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.247834] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.248006] mce: CPU supports 7 MCE banks
[ 0.248011] LVT offset 1 assigned for vector 0xf9
[ 0.248015] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.248015] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.248017] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.248017] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.248022] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.248022] Spectre V2 : User space: Vulnerable
[ 0.248023] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.252188] Freeing SMP alternatives memory: 24K
[ 0.258512] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.258512] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.258512] ... version: 0
[ 0.258512] ... bit width: 48
[ 0.258512] ... generic registers: 6
[ 0.258512] ... value mask: 0000ffffffffffff
[ 0.258512] ... max period: 00007fffffffffff
[ 0.258512] ... fixed-purpose events: 0
[ 0.258512] ... event mask: 000000000000003f
[ 0.258512] rcu: Hierarchical SRCU implementation.
[ 0.258512] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.258512] smp: Bringing up secondary CPUs ...
[ 0.258512] x86: Booting SMP configuration:
[ 0.258512] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.289272] smp: Brought up 1 node, 8 CPUs
[ 0.289272] smpboot: Max logical packages: 1
[ 0.289272] smpboot: Total of 8 processors activated (64212.41 BogoMIPS)
[ 0.290769] devtmpfs: initialized
[ 0.290769] x86/mm: Memory block size: 128MB
[ 0.290927] PM: Registering ACPI NVS region [mem 0xcab54000-0xcb959fff] (14704640 bytes)
[ 0.290927] PM: Registering ACPI NVS region [mem 0xcca38000-0xccc3dfff] (2121728 bytes)
[ 0.290927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.290927] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.290927] pinctrl core: initialized pinctrl subsystem
[ 0.291026] NET: Registered protocol family 16
[ 0.291093] audit: initializing netlink subsys (disabled)
[ 0.291097] audit: type=2000 audit(1559481158.064:1): state=initialized audit_enabled=0 res=1
[ 0.291097] cpuidle: using governor ladder
[ 0.291097] cpuidle: using governor menu
[ 0.291097] ACPI: bus type PCI registered
[ 0.291097] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.291097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291097] PCI: not using MMCONFIG
[ 0.291097] PCI: Using configuration type 1 for base access
[ 0.291097] PCI: Using configuration type 1 for extended access
[ 0.291097] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.291097] mtrr: probably your BIOS does not setup all CPUs.
[ 0.291097] mtrr: corrected configuration.
[ 0.291296] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.291296] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.291296] ACPI: Added _OSI(Module Device)
[ 0.291296] ACPI: Added _OSI(Processor Device)
[ 0.291296] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.291296] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.291296] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.291296] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.296813] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.298052] ACPI: EC: EC started
[ 0.298053] ACPI: EC: interrupt blocked
[ 0.298058] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.298059] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.298060] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.298061] ACPI: Interpreter enabled
[ 0.298075] ACPI: (supports S0 S3 S4 S5)
[ 0.298076] ACPI: Using IOAPIC for interrupt routing
[ 0.298188] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298217] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.298228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.298437] ACPI: Enabled 11 GPEs in block 00 to 1F
[ 0.303220] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.303224] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.303227] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.303472] PCI host bridge to bus 0000:00
[ 0.303474] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.303475] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.303476] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.303477] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.303478] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.303479] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.303480] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[ 0.303481] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.303491] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.303613] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.303636] pci 0000:00:02.0: enabling Extended Tags
[ 0.303663] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.303736] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.303758] pci 0000:00:04.0: enabling Extended Tags
[ 0.303785] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.303889] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[ 0.303911] pci 0000:00:0b.0: enabling Extended Tags
[ 0.303937] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.304007] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 0.304029] pci 0000:00:0d.0: enabling Extended Tags
[ 0.304055] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.304131] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.304149] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.304157] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.304164] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.304176] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.304183] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.304191] pci 0000:00:11.0: reg 0x24: [mem 0xfe50b000-0xfe50b3ff]
[ 0.304289] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.304304] pci 0000:00:12.0: reg 0x10: [mem 0xfe50a000-0xfe50afff]
[ 0.304417] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.304435] pci 0000:00:12.2: reg 0x10: [mem 0xfe509000-0xfe5090ff]
[ 0.304505] pci 0000:00:12.2: supports D1 D2
[ 0.304506] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.304576] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.304592] pci 0000:00:13.0: reg 0x10: [mem 0xfe508000-0xfe508fff]
[ 0.304706] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.304724] pci 0000:00:13.2: reg 0x10: [mem 0xfe507000-0xfe5070ff]
[ 0.304793] pci 0000:00:13.2: supports D1 D2
[ 0.304794] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.304866] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.304987] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.305035] pci 0000:00:14.2: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.305092] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.305157] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.305277] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.305370] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.305385] pci 0000:00:14.5: reg 0x10: [mem 0xfe506000-0xfe506fff]
[ 0.305507] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.305542] pci 0000:00:15.0: enabling Extended Tags
[ 0.305580] pci 0000:00:15.0: supports D1 D2
[ 0.305657] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.305692] pci 0000:00:15.1: enabling Extended Tags
[ 0.305730] pci 0000:00:15.1: supports D1 D2
[ 0.305806] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.305840] pci 0000:00:15.2: enabling Extended Tags
[ 0.305878] pci 0000:00:15.2: supports D1 D2
[ 0.305957] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.305992] pci 0000:00:15.3: enabling Extended Tags
[ 0.306030] pci 0000:00:15.3: supports D1 D2
[ 0.306108] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.306123] pci 0000:00:16.0: reg 0x10: [mem 0xfe505000-0xfe505fff]
[ 0.306256] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.306274] pci 0000:00:16.2: reg 0x10: [mem 0xfe504000-0xfe5040ff]
[ 0.306343] pci 0000:00:16.2: supports D1 D2
[ 0.306344] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.306414] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.306488] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.306559] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.306627] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.306701] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.306768] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.307033] pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
[ 0.307050] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
[ 0.307060] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.307070] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
[ 0.307077] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.307084] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.307089] pci 0000:01:00.0: enabling Extended Tags
[ 0.307185] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.307199] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.307239] pci 0000:01:00.1: enabling Extended Tags
[ 0.307319] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring
[ 0.318541] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.318544] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.318546] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.318549] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.318737] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.318904] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.319067] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.319082] pci_bus 0000:05: extended config space not accessible
[ 0.319109] pci 0000:05:05.0: [10b7:9200] type 00 class 0x020000
[ 0.319128] pci 0000:05:05.0: reg 0x10: [io 0xd000-0xd07f]
[ 0.319138] pci 0000:05:05.0: reg 0x14: [mem 0xfe420000-0xfe42007f]
[ 0.319185] pci 0000:05:05.0: reg 0x30: [mem 0xfe400000-0xfe41ffff pref]
[ 0.319217] pci 0000:05:05.0: supports D1 D2
[ 0.319218] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.319288] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.319291] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.319294] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.319297] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.319298] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.319299] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.319300] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.319301] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.319302] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.319303] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[ 0.319485] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
[ 0.319509] pci 0000:06:00.0: reg 0x10: [io 0xc050-0xc057]
[ 0.319519] pci 0000:06:00.0: reg 0x14: [io 0xc040-0xc043]
[ 0.319529] pci 0000:06:00.0: reg 0x18: [io 0xc030-0xc037]
[ 0.319540] pci 0000:06:00.0: reg 0x1c: [io 0xc020-0xc023]
[ 0.319550] pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.319560] pci 0000:06:00.0: reg 0x24: [mem 0xfe300000-0xfe3001ff]
[ 0.319727] pci 0000:00:15.0: PCI bridge to [bus 06]
[ 0.319731] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
[ 0.319734] pci 0000:00:15.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.319791] pci 0000:07:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.319825] pci 0000:07:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
[ 0.319958] pci 0000:07:00.0: PME# supported from D3cold
[ 0.320042] pci 0000:00:15.1: PCI bridge to [bus 07]
[ 0.320048] pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.320107] pci 0000:08:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.320140] pci 0000:08:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
[ 0.320271] pci 0000:08:00.0: PME# supported from D3cold
[ 0.320354] pci 0000:00:15.2: PCI bridge to [bus 08]
[ 0.320359] pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.320416] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[ 0.320444] pci 0000:09:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.320471] pci 0000:09:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref]
[ 0.320487] pci 0000:09:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
[ 0.320579] pci 0000:09:00.0: supports D1 D2
[ 0.320580] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.320681] pci 0000:00:15.3: PCI bridge to [bus 09]
[ 0.320685] pci 0000:00:15.3: bridge window [io 0xb000-0xbfff]
[ 0.320691] pci 0000:00:15.3: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.321020] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.321071] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.321125] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.321177] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 0.321219] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.321251] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.321284] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.321316] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.321433] ACPI: EC: interrupt unblocked
[ 0.321440] ACPI: EC: event unblocked
[ 0.321445] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.321446] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.321494] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.321494] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.321494] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.321494] vgaarb: loaded
[ 0.321494] pps_core: LinuxPPS API ver. 1 registered
[ 0.321494] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.321494] PTP clock support registered
[ 0.321494] EDAC MC: Ver: 3.0.0
[ 0.321494] PCI: Using ACPI for IRQ routing
[ 0.329424] PCI: pci_cache_line_size set to 64 bytes
[ 0.329494] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.329495] e820: reserve RAM buffer [mem 0xca868000-0xcbffffff]
[ 0.329495] e820: reserve RAM buffer [mem 0xcca38000-0xcfffffff]
[ 0.329496] e820: reserve RAM buffer [mem 0xcd083000-0xcfffffff]
[ 0.329497] e820: reserve RAM buffer [mem 0xcd800000-0xcfffffff]
[ 0.329497] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[ 0.329580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.329580] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.332576] clocksource: Switched to clocksource tsc-early
[ 0.340178] VFS: Disk quotas dquot_6.6.0
[ 0.340191] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.340286] AppArmor: AppArmor Filesystem Enabled
[ 0.340300] pnp: PnP ACPI init
[ 0.340396] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.340400] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.340613] system 00:01: [io 0x040b] has been reserved
[ 0.340615] system 00:01: [io 0x04d6] has been reserved
[ 0.340616] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.340619] system 00:01: [io 0x0c14] has been reserved
[ 0.340620] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.340621] system 00:01: [io 0x0c52] has been reserved
[ 0.340622] system 00:01: [io 0x0c6c] has been reserved
[ 0.340623] system 00:01: [io 0x0c6f] has been reserved
[ 0.340624] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.340625] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.340626] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.340627] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.340628] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.340629] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.340630] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.340631] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.340632] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.340633] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.340635] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.340636] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.340637] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.340639] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.340640] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.340641] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.340643] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.340645] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340763] system 00:02: [io 0x0290-0x02af] has been reserved
[ 0.340766] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340793] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.340844] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.340847] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340885] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341018] pnp 00:06: [dma 0 disabled]
[ 0.341052] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.341150] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341226] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.341229] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341329] pnp: PnP ACPI: found 9 devices
[ 0.347249] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.347295] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.347297] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.347300] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.347302] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.347305] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.347310] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.347315] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.347321] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.347323] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.347327] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.347334] pci 0000:00:15.0: PCI bridge to [bus 06]
[ 0.347335] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
[ 0.347339] pci 0000:00:15.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.347344] pci 0000:00:15.1: PCI bridge to [bus 07]
[ 0.347347] pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.347353] pci 0000:00:15.2: PCI bridge to [bus 08]
[ 0.347356] pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.347362] pci 0000:00:15.3: PCI bridge to [bus 09]
[ 0.347364] pci 0000:00:15.3: bridge window [io 0xb000-0xbfff]
[ 0.347368] pci 0000:00:15.3: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.347373] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.347374] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.347375] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.347376] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.347377] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.347378] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.347379] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.347380] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.347381] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[ 0.347382] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.347383] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.347384] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.347385] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
[ 0.347386] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.347386] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
[ 0.347387] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
[ 0.347388] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.347389] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.347390] pci_bus 0000:05: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.347391] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.347392] pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.347392] pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.347393] pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.347394] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
[ 0.347395] pci_bus 0000:09: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.347443] NET: Registered protocol family 2
[ 0.347565] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.347581] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.347649] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.347752] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.347792] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.347809] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.347861] NET: Registered protocol family 1
[ 0.347864] NET: Registered protocol family 44
[ 0.428428] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c1 took 78634 usecs
[ 0.508430] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c1 took 78025 usecs
[ 0.588431] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c1 took 78023 usecs
[ 0.668437] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c1 took 78118 usecs
[ 0.668555] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.668567] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.668795] PCI: CLS 64 bytes, default 64
[ 0.668827] Unpacking initramfs...
[ 1.158437] Freeing initrd memory: 36940K
[ 1.158987] PCI-DMA: Disabling AGP.
[ 1.159052] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 1.159052] PCI-DMA: using GART IOMMU.
[ 1.159054] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.162353] amd_uncore: AMD NB counters detected
[ 1.162485] LVT offset 0 assigned for vector 0x400
[ 1.162569] perf: AMD IBS detected (0x000000ff)
[ 1.163091] Initialise system trusted keyrings
[ 1.163099] Key type blacklist registered
[ 1.163144] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.164306] zbud: loaded
[ 1.164462] pstore: using deflate compression
[ 1.313158] Key type asymmetric registered
[ 1.313159] Asymmetric key parser 'x509' registered
[ 1.313167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.313217] io scheduler noop registered
[ 1.313217] io scheduler deadline registered
[ 1.313241] io scheduler cfq registered (default)
[ 1.313241] io scheduler mq-deadline registered
[ 1.313912] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.314460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.334930] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.335266] Linux agpgart interface v0.103
[ 1.335295] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.335295] AMD IOMMUv2 functionality not available on this system
[ 1.335867] i8042: PNP: No PS/2 controller found.
[ 1.335912] mousedev: PS/2 mouse device common for all mice
[ 1.335936] rtc_cmos 00:03: RTC can wake from S4
[ 1.336043] rtc_cmos 00:03: registered as rtc0
[ 1.336055] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.336146] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.336469] NET: Registered protocol family 10
[ 1.342605] Segment Routing with IPv6
[ 1.342621] mip6: Mobile IPv6
[ 1.342623] NET: Registered protocol family 17
[ 1.342656] mpls_gso: MPLS GSO support
[ 1.343034] microcode: microcode updated early to new patch_level=0x06000852
[ 1.343057] microcode: CPU0: patch_level=0x06000852
[ 1.343061] microcode: CPU1: patch_level=0x06000852
[ 1.343068] microcode: CPU2: patch_level=0x06000852
[ 1.343073] microcode: CPU3: patch_level=0x06000852
[ 1.343076] microcode: CPU4: patch_level=0x06000852
[ 1.343081] microcode: CPU5: patch_level=0x06000852
[ 1.343089] microcode: CPU6: patch_level=0x06000852
[ 1.343095] microcode: CPU7: patch_level=0x06000852
[ 1.343126] microcode: Microcode Update Driver: v2.2.
[ 1.343134] sched_clock: Marking stable (1336578704, 6543768)->(1665322557, -322200085)
[ 1.343333] registered taskstats version 1
[ 1.343333] Loading compiled-in X.509 certificates
[ 1.377380] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.377394] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.377412] zswap: loaded using pool lzo/zbud
[ 1.377592] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.377926] rtc_cmos 00:03: setting system clock to 2019-06-02 13:12:40 UTC (1559481160)
[ 1.640818] Freeing unused kernel image memory: 1580K
[ 1.666670] Write protecting the kernel read-only data: 16384k
[ 1.668093] Freeing unused kernel image memory: 2028K
[ 1.668325] Freeing unused kernel image memory: 916K
[ 1.674662] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.674666] Run /init as init process
[ 1.718955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.718974] ACPI: Power Button [PWRB]
[ 1.719032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.719039] ACPI: Power Button [PWRF]
[ 1.728199] 3c59x: Donald Becker and others.
[ 1.728206] 0000:05:05.0: 3Com PCI 3c905C Tornado at (____ptrval____).
[ 1.734252] ACPI: bus type USB registered
[ 1.734346] usbcore: registered new interface driver usbfs
[ 1.734353] usbcore: registered new interface driver hub
[ 1.734384] usbcore: registered new device driver usb
[ 1.738141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.738798] ehci-pci: EHCI PCI platform driver
[ 1.739145] cryptd: max_cpu_qlen set to 1000
[ 1.739217] SCSI subsystem initialized
[ 1.741939] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.751099] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.751105] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 1.751213] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.751338] QUIRK: Enable AMD PLL fix
[ 1.751360] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.751365] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.751368] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.751376] ehci-pci 0000:00:12.2: debug port 1
[ 1.751408] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe509000
[ 1.751456] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.753344] AVX version of gcm_enc/dec engaged.
[ 1.753345] AES CTR mode by8 optimization enabled
[ 1.753876] libphy: r8169: probed
[ 1.754295] r8169 0000:09:00.0 eth1: RTL8168f/8111f, e0:3f:49:a1:fc:51, XID 48000800, IRQ 26
[ 1.754297] r8169 0000:09:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.757717] libata version 3.00 loaded.
[ 1.761575] ahci 0000:00:11.0: version 3.0
[ 1.761768] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0x2b impl SATA mode
[ 1.761770] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.762540] scsi host0: ahci
[ 1.762797] scsi host1: ahci
[ 1.762943] scsi host2: ahci
[ 1.763083] scsi host3: ahci
[ 1.763213] scsi host4: ahci
[ 1.763332] scsi host5: ahci
[ 1.763406] ata1: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
[ 1.763408] ata2: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
[ 1.763408] ata3: DUMMY
[ 1.763410] ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
[ 1.763410] ata5: DUMMY
[ 1.763412] ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b380 irq 19
[ 1.763582] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
[ 1.763611] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.763613] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.763967] scsi host6: ahci
[ 1.764095] scsi host7: ahci
[ 1.764202] ata7: SATA max UDMA/133 abar m512@0xfe300000 port 0xfe300100 irq 27
[ 1.764204] ata8: SATA max UDMA/133 abar m512@0xfe300000 port 0xfe300180 irq 27
[ 1.764743] 3c59x 0000:05:05.0 enp5s5: renamed from eth0
[ 1.770532] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.770587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.770588] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.770589] usb usb1: Product: EHCI Host Controller
[ 1.770590] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 1.770591] usb usb1: SerialNumber: 0000:00:12.2
[ 1.770681] hub 1-0:1.0: USB hub found
[ 1.770686] hub 1-0:1.0: 5 ports detected
[ 1.770804] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.770809] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[ 1.831279] xhci_hcd 0000:07:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[ 1.831509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.831511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.831511] usb usb2: Product: xHCI Host Controller
[ 1.831512] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.831513] usb usb2: SerialNumber: 0000:07:00.0
[ 1.831662] hub 2-0:1.0: USB hub found
[ 1.831670] hub 2-0:1.0: 2 ports detected
[ 1.831755] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.831758] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 1.831760] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.831768] ehci-pci 0000:00:13.2: debug port 1
[ 1.831795] ehci-pci 0000:00:13.2: irq 21, io mem 0xfe507000
[ 1.831819] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.831821] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[ 1.831823] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed
[ 1.831860] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.831878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.831879] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.831880] usb usb4: Product: xHCI Host Controller
[ 1.831881] usb usb4: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.831881] usb usb4: SerialNumber: 0000:07:00.0
[ 1.831952] hub 4-0:1.0: USB hub found
[ 1.831959] hub 4-0:1.0: 2 ports detected
[ 1.834919] r8169 0000:09:00.0 enp9s0: renamed from eth1
[ 1.845771] MXM: GUID detected in BIOS
[ 1.845944] nouveau 0000:01:00.0: NVIDIA GF114 (0ce080a1)
[ 1.872957] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.873010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.873011] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.873012] usb usb3: Product: EHCI Host Controller
[ 1.873013] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 1.873013] usb usb3: SerialNumber: 0000:00:13.2
[ 1.880804] hub 3-0:1.0: USB hub found
[ 1.880809] hub 3-0:1.0: 5 ports detected
[ 1.880936] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 1.880940] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
[ 2.052175] nouveau 0000:01:00.0: bios: version 70.24.21.00.00
[ 2.052215] xhci_hcd 0000:08:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[ 2.052425] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.052426] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.052427] usb usb5: Product: xHCI Host Controller
[ 2.052427] usb usb5: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 2.052428] usb usb5: SerialNumber: 0000:08:00.0
[ 2.052590] hub 5-0:1.0: USB hub found
[ 2.052598] hub 5-0:1.0: 2 ports detected
[ 2.052692] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 2.052694] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
[ 2.052696] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
[ 2.052734] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.052753] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 2.052754] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.052755] usb usb6: Product: xHCI Host Controller
[ 2.052756] usb usb6: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 2.052757] usb usb6: SerialNumber: 0000:08:00.0
[ 2.052828] hub 6-0:1.0: USB hub found
[ 2.052836] hub 6-0:1.0: 2 ports detected
[ 2.053153] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.053157] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 2.053159] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.053167] ehci-pci 0000:00:16.2: debug port 1
[ 2.053194] ehci-pci 0000:00:16.2: irq 23, io mem 0xfe504000
[ 2.073457] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.073499] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.073500] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.073501] usb usb7: Product: EHCI Host Controller
[ 2.073502] usb usb7: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 2.073503] usb usb7: SerialNumber: 0000:00:16.2
[ 2.073840] hub 7-0:1.0: USB hub found
[ 2.073845] hub 7-0:1.0: 4 ports detected
[ 2.074774] ohci-pci: OHCI PCI platform driver
[ 2.075904] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5
[ 2.078033] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.078108] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.132635] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.132639] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 2.132656] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe50a000
[ 2.132920] [TTM] Zone kernel: Available graphics memory: 1969720 kiB
[ 2.132921] [TTM] Initializing pool allocator
[ 2.132925] [TTM] Initializing DMA pool allocator
[ 2.132933] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 2.132934] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.132936] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.132938] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.132939] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 2.132940] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 2.132941] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011380 00000000
[ 2.132942] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011382 00020030
[ 2.132943] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022362 00020010
[ 2.132944] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 2.132945] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010130
[ 2.132946] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[ 2.147135] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.147135] [drm] Driver supports precise vblank timestamp query.
[ 2.148064] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 2.194563] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.194565] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.194566] usb usb8: Product: OHCI PCI host controller
[ 2.194566] usb usb8: Manufacturer: Linux 4.19.0-5-amd64 ohci_hcd
[ 2.194567] usb usb8: SerialNumber: 0000:00:12.0
[ 2.194922] hub 8-0:1.0: USB hub found
[ 2.194928] hub 8-0:1.0: 5 ports detected
[ 2.238612] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.238676] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.238729] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.239322] ata1.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[ 2.239324] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.239681] ata4.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[ 2.240002] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 2.240054] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.240083] ata1.00: configured for UDMA/133
[ 2.240239] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325031 C PQ: 0 ANSI: 5
[ 2.241406] ata4.00: configured for UDMA/100
[ 2.241424] ata2.00: configured for UDMA/133
[ 2.241533] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 2.243955] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
[ 2.244292] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.244297] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244316] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.244322] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.244323] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.244332] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.250426] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.250427] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.250599] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.252274] sdb: sdb1 sdb2
[ 2.252486] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.269310] nouveau 0000:01:00.0: DRM: allocated 1600x1200 fb: 0x60000, bo (____ptrval____)
[ 2.269358] fbcon: nouveaufb (fb0) is primary device
[ 2.271651] tsc: Refined TSC clocksource calibration: 4013.472 MHz
[ 2.271666] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39da135e2b7, max_idle_ns: 440795362235 ns
[ 2.271722] clocksource: Switched to clocksource tsc
[ 2.271838] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.271842] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 2.271868] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe508000
[ 2.306256] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 2.306666] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.343448] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.343449] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.343450] usb usb9: Product: OHCI PCI host controller
[ 2.343451] usb usb9: Manufacturer: Linux 4.19.0-5-amd64 ohci_hcd
[ 2.343452] usb usb9: SerialNumber: 0000:00:13.0
[ 2.343597] hub 9-0:1.0: USB hub found
[ 2.343604] hub 9-0:1.0: 5 ports detected
[ 2.364077] Console: switching to colour frame buffer device 200x75
[ 2.374916] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.375004] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.375011] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 2.375032] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe506000
[ 2.390614] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 2.406622] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 2.406636] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 2.438630] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.438631] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.438632] usb usb10: Product: OHCI PCI host controller
[ 2.438633] usb usb10: Manufacturer: Linux 4.19.0-5-amd64 ohci_hcd
[ 2.438634] usb usb10: SerialNumber: 0000:00:14.5
[ 2.438778] hub 10-0:1.0: USB hub found
[ 2.438784] hub 10-0:1.0: 2 ports detected
[ 2.439027] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.439031] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 2.439051] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe505000
[ 2.502621] usb 7-2: new high-speed USB device number 2 using ehci-pci
[ 2.502656] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.502658] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.502658] usb usb11: Product: OHCI PCI host controller
[ 2.502659] usb usb11: Manufacturer: Linux 4.19.0-5-amd64 ohci_hcd
[ 2.502660] usb usb11: SerialNumber: 0000:00:16.0
[ 2.502756] hub 11-0:1.0: USB hub found
[ 2.502763] hub 11-0:1.0: 4 ports detected
[ 2.557924] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.563483] usb 3-4: New USB device found, idVendor=04e8, idProduct=343d, bcdDevice= 1.00
[ 2.563485] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.563486] usb 3-4: Product: CLX-3180 Series
[ 2.563487] usb 3-4: Manufacturer: Samsung Electronics Co., Ltd.
[ 2.563487] usb 3-4: SerialNumber: Z4OQBAHB700174D
[ 2.579214] usb 1-4: New USB device found, idVendor=045e, idProduct=076d, bcdDevice= 1.03
[ 2.579215] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.579216] usb 1-4: Product: Microsoft® LifeCam HD-5000
[ 2.579217] usb 1-4: Manufacturer: Microsoft
[ 2.666635] usb 7-2: New USB device found, idVendor=05e3, idProduct=070e, bcdDevice=96.02
[ 2.666636] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.666637] usb 7-2: Product: USB Storage
[ 2.666638] usb 7-2: SerialNumber: 000000009602
[ 2.670757] usb-storage 7-2:1.0: USB Mass Storage device detected
[ 2.670863] scsi host8: usb-storage 7-2:1.0
[ 2.670926] usbcore: registered new interface driver usb-storage
[ 2.672082] usbcore: registered new interface driver uas
[ 2.938609] usb 8-5: new low-speed USB device number 2 using ohci-pci
[ 2.986612] usb 9-5: new full-speed USB device number 2 using ohci-pci
[ 3.056991] random: fast init done
[ 3.134562] usb 8-5: New USB device found, idVendor=046d, idProduct=c31d, bcdDevice=66.01
[ 3.134563] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.134564] usb 8-5: Product: USB Keyboard
[ 3.134565] usb 8-5: Manufacturer: Logitech
[ 3.150004] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.164939] usbcore: registered new interface driver usbhid
[ 3.164940] usbhid: USB HID core driver
[ 3.166160] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.0/0003:046D:C31D.0001/input/input2
[ 3.187731] usb 9-5: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 3.187735] usb 9-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.187738] usb 9-5: Product: USB Receiver
[ 3.187740] usb 9-5: Manufacturer: Logitech
[ 3.196078] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.0/0003:046D:C52F.0003/input/input3
[ 3.222892] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-5/input0
[ 3.222982] hid-generic 0003:046D:C52F.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-5/input0
[ 3.223082] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.1/0003:046D:C31D.0002/input/input4
[ 3.226164] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.1/0003:046D:C52F.0004/input/input6
[ 3.282715] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.1/0003:046D:C31D.0002/input/input5
[ 3.342807] hid-generic 0003:046D:C31D.0002: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-5/input1
[ 3.342862] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-5/input1
[ 3.684079] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.684840] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.685639] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.686260] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.690881] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 3.691509] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 3.697760] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 3.698435] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 3.950378] PM: Image not found (code -22)
[ 4.316592] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.824880] random: crng init done
[ 5.851647] systemd[1]: Inserted module 'autofs4'
[ 6.043917] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.062755] systemd[1]: Detected architecture x86-64.
[ 6.074935] systemd[1]: Set hostname to <gwaihir>.
[ 7.705326] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.705355] systemd[1]: Reached target Remote File Systems.
[ 7.705450] systemd[1]: Listening on Journal Audit Socket.
[ 7.706993] systemd[1]: Created slice system-getty.slice.
[ 7.707049] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.707120] systemd[1]: Listening on Journal Socket.
[ 7.707712] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.812718] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 8.172524] systemd-journald[334]: Received request to flush runtime journal from PID 1
[ 8.317069] lp: driver loaded but no devices found
[ 8.379570] ppdev: user-space parallel port driver
[ 8.564542] it87: Found IT8721F chip at 0x290, revision 1
[ 9.848854] audit: type=1400 audit(1559481168.965:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=376 comm="apparmor_parser"
[ 9.852991] audit: type=1400 audit(1559481168.969:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=374 comm="apparmor_parser"
[ 9.898658] audit: type=1400 audit(1559481169.017:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=379 comm="apparmor_parser"
[ 9.898686] audit: type=1400 audit(1559481169.017:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=372 comm="apparmor_parser"
[ 9.898688] audit: type=1400 audit(1559481169.017:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=372 comm="apparmor_parser"
[ 9.901795] audit: type=1400 audit(1559481169.017:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=371 comm="apparmor_parser"
[ 9.932764] audit: type=1400 audit(1559481169.049:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=370 comm="apparmor_parser"
[ 9.932767] audit: type=1400 audit(1559481169.049:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=370 comm="apparmor_parser"
[ 9.932770] audit: type=1400 audit(1559481169.049:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=370 comm="apparmor_parser"
[ 9.974389] audit: type=1400 audit(1559481169.089:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=375 comm="apparmor_parser"
[ 10.284082] acpi_cpufreq: overriding BIOS provided _PSD data
[ 10.489481] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 10.489625] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 10.489801] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 10.556798] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 10.567338] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.567394] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.567467] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 10.567581] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 10.567652] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 10.567704] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 10.567761] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 10.610772] asus_wmi: ASUS WMI generic driver loaded
[ 10.628678] asus_wmi: Initialization: 0x0
[ 10.628709] asus_wmi: BIOS WMI version: 0.9
[ 10.628759] asus_wmi: SFUN value: 0x0
[ 10.629107] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 10.629215] asus_wmi: Number of fans: 1
[ 11.211424] usblp 3-4:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x343D
[ 11.211485] usbcore: registered new interface driver usblp
[ 11.380647] media: Linux media interface: v0.10
[ 11.423725] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 11.423746] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 11.492513] videodev: Linux video capture interface: v2.00
[ 11.584408] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 11.584411] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.584413] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.584414] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.584415] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 11.584416] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.584418] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 11.584420] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 11.584421] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 11.601387] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 11.601523] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 11.601666] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 11.602261] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 11.602492] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 11.602713] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 11.602874] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 11.603218] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 11.812829] kvm: Nested Virtualization enabled
[ 11.812832] kvm: Nested Paging enabled
[ 11.999942] usbcore: registered new interface driver snd-usb-audio
[ 12.171358] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d)
[ 12.179818] uvcvideo 1-4:1.0: Entity type for entity Extension 5 was not initialized!
[ 12.179823] uvcvideo 1-4:1.0: Entity type for entity Processing 4 was not initialized!
[ 12.179826] uvcvideo 1-4:1.0: Entity type for entity Selector 3 was not initialized!
[ 12.179829] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.179971] input: Microsoft® LifeCam HD-5000: Mi as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input19
[ 12.180117] usbcore: registered new interface driver uvcvideo
[ 12.180119] USB Video Class driver (1.1.1)
[ 12.267842] MCE: In-kernel MCE decoding enabled.
[ 12.343619] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.343622] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.404590] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.404594] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.463687] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.463690] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.515715] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.515718] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.889204] Adding 1023996k swap on /dev/sda6. Priority:-2 extents:1 across:1023996k FS
[ 12.899456] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
[ 12.899625] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
[ 12.899767] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22
[ 12.899905] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23
[ 16.999477] sr 3:0:0:0: [sr0] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 16.999483] sr 3:0:0:0: [sr0] tag#13 Sense Key : Medium Error [current]
[ 16.999487] sr 3:0:0:0: [sr0] tag#13 Add. Sense: Unrecovered read error
[ 16.999491] sr 3:0:0:0: [sr0] tag#13 CDB: Read(10) 28 00 00 01 5a 80 00 00 40 00
[ 16.999494] print_req_error: I/O error, dev sr0, sector 354816
[ 18.571830] sr 3:0:0:0: [sr0] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 18.571836] sr 3:0:0:0: [sr0] tag#6 Sense Key : Medium Error [current]
[ 18.571840] sr 3:0:0:0: [sr0] tag#6 Add. Sense: Unrecovered read error
[ 18.571844] sr 3:0:0:0: [sr0] tag#6 CDB: Read(10) 28 00 00 01 5a 82 00 00 02 00
[ 18.571847] print_req_error: I/O error, dev sr0, sector 354824
[ 18.572395] Buffer I/O error on dev sr0, logical block 44353, async page read
[ 20.891768] r8169 0000:09:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[ 20.892027] RTL8211E Gigabit Ethernet r8169-900:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[ 21.101524] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[ 21.101938] r8169 0000:09:00.0 enp9s0: Link is Down
[ 22.884810] r8169 0000:09:00.0 enp9s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 22.884822] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[ 24.746307] usblp1: removed
[ 24.747873] usblp 3-4:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x343D
[ 556.900123] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvce_fuc084 (-2)
[ 556.900128] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 556.900131] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvce_fuc084 failed with error -2
[ 556.900144] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvce_fuc084d (-2)
[ 556.900147] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvce_fuc084d failed with error -2
[ 556.900149] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 556.900152] nouveau 0000:01:00.0: msvld: init failed, -19
[ 558.667793] nouveau 0000:01:00.0: gr: TRAP ch 4 [003fa97000 Xorg[757]]
[ 558.667817] nouveau 0000:01:00.0: gr: GPC0/PROP trap: 00000400 [RT_LINEAR_MISMATCH] x = 592, y = 256, format = 18, storage type = 0
[ 558.667834] nouveau 0000:01:00.0: gr: GPC1/PROP trap: 00000400 [RT_LINEAR_MISMATCH] x = 576, y = 256, format = 18, storage type = 0
[ 558.667852] nouveau 0000:01:00.0: fifo: write fault at 00033ca000 engine 00 [PGRAPH] client 0f [GPC1/PROP] reason 02 [PAGE_NOT_PRESENT] on channel 4 [003fa97000 Xorg[757]]
[ 558.667856] nouveau 0000:01:00.0: fifo: gr engine fault on channel 4, recovering...
[ 558.668711] nouveau 0000:01:00.0: Xorg[757]: channel 4 killed!
Reply to: