Bug#927277: linux-image-4.19.0-4-amd64: f71882fg hwmon driver conflicts with ACPI
Package: src:linux
Version: 4.19.28-2
Severity: normal
Hi,
When I'm trying to read voltage and fan speed from the MB which has a f81866a
chip through ACPI the result is none. Only the temperature will be read.
When I'm trying to add f71882fg hwmon driver is says that is in conflict with
ACPI.
I really need to read the voltages from the motherboard to monitor if there are
some fluctuations on 12V and 5V.
>From the logs says to use an ACPI driver for that, but I don't know if there is
any.
There is any solution to solve this?
Motherboad: Jetway NF9Q-Q87
CPU: Intel(R) Core(TM) i5-4670T CPU @ 2.30GHz
-- Package-specific info:
** Version:
Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-4-amd64 root=UUID=b9825d44-0055-4f52-9361-d836aec0a3cb ro 8250.nr_uarts=8 console=tty0 console=ttyS0,115200n8 i915.modeset=0 nomodeset acpi_enforce_resources=lax quiet
** Not tainted
** Kernel log:
[ 487.366593] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed
[ 487.374919] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch }
[ 487.381428] ata1.00: failed command: WRITE FPDMA QUEUED
[ 487.386697] ata1.00: cmd 61/e0:10:00:10:1c/03:00:06:00:00/40 tag 2 ncq dma 507904 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[ 487.402647] ata1.00: status: { DRDY }
[ 487.406346] ata1.00: failed command: READ FPDMA QUEUED
[ 487.411539] ata1.00: cmd 60/08:18:18:10:55/00:00:0a:00:00/40 tag 3 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[ 487.427182] ata1.00: status: { DRDY }
[ 487.430882] ata1: hard resetting link
[ 488.156251] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 488.156283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 488.165247] ata1.00: configured for UDMA/133
[ 488.165269] ata1: EH complete
[ 488.170373] ata4.00: configured for UDMA/133
[ 488.170379] ata4: EH complete
[ 488.308244] ata1.00: exception Emask 0x50 SAct 0x8 SErr 0x4890800 action 0xe frozen
[ 488.317228] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed
[ 488.326181] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch }
[ 488.333264] ata1.00: failed command: WRITE FPDMA QUEUED
[ 488.339134] ata1.00: cmd 61/58:18:00:08:1c/05:00:06:00:00/40 tag 3 ncq dma 700416 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[ 488.356318] ata1.00: status: { DRDY }
[ 488.360689] ata1: hard resetting link
[ 488.360698] ata4.00: exception Emask 0x10 SAct 0x800000 SErr 0x4890000 action 0xe frozen
[ 488.369475] ata4.00: irq_stat 0x08400040, interface fatal error, connection status changed
[ 488.378480] ata4: SError: { PHYRdyChg 10B8B LinkSeq DevExch }
[ 488.385025] ata4.00: failed command: WRITE FPDMA QUEUED
[ 488.390928] ata4.00: cmd 61/58:b8:00:08:1c/05:00:06:00:00/40 tag 23 ncq dma 700416 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 488.408108] ata4.00: status: { DRDY }
[ 488.412429] ata4: hard resetting link
[ 489.124251] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 489.137380] ata4.00: configured for UDMA/133
[ 489.137401] ata4: EH complete
[ 489.152201] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 489.166215] ata1.00: configured for UDMA/133
[ 489.166229] ata1: EH complete
[ 489.528233] ata1: limiting SATA link speed to 3.0 Gbps
[ 489.528241] ata1.00: exception Emask 0x50 SAct 0xc00 SErr 0x4890800 action 0xe frozen
[ 489.538164] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed
[ 489.547095] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch }
[ 489.554168] ata1.00: failed command: WRITE FPDMA QUEUED
[ 489.560009] ata1.00: cmd 61/48:50:00:d8:1d/05:00:06:00:00/40 tag 10 ncq dma 692224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[ 489.577197] ata1.00: status: { DRDY }
[ 489.581459] ata1.00: failed command: WRITE FPDMA QUEUED
[ 489.587327] ata1.00: cmd 61/10:58:48:dd:1d/00:00:06:00:00/40 tag 11 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[ 489.604355] ata1.00: status: { DRDY }
[ 489.608641] ata1: hard resetting link
[ 489.608677] ata4: limiting SATA link speed to 3.0 Gbps
[ 489.608679] ata4.00: exception Emask 0x10 SAct 0x3000 SErr 0x4090000 action 0xe frozen
[ 489.617208] ata4.00: irq_stat 0x00400040, connection status changed
[ 489.624091] ata4: SError: { PHYRdyChg 10B8B DevExch }
[ 489.629735] ata4.00: failed command: WRITE FPDMA QUEUED
[ 489.635561] ata4.00: cmd 61/48:60:00:d8:1d/05:00:06:00:00/40 tag 12 ncq dma 692224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 489.652670] ata4.00: status: { DRDY }
[ 489.656908] ata4.00: failed command: WRITE FPDMA QUEUED
[ 489.662728] ata4.00: cmd 61/10:68:48:dd:1d/00:00:06:00:00/40 tag 13 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 489.679683] ata4.00: status: { DRDY }
[ 489.683936] ata4: hard resetting link
[ 490.408308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 490.428969] ata1.00: configured for UDMA/133
[ 490.428995] ata1: EH complete
[ 490.436165] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 490.449603] ata4.00: configured for UDMA/133
[ 490.449617] ata4: EH complete
[ 508.757816] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 508.789897] Bluetooth: Core ver 2.22
[ 508.789907] NET: Registered protocol family 31
[ 508.789907] Bluetooth: HCI device and connection manager initialized
[ 508.789910] Bluetooth: HCI socket layer initialized
[ 508.789912] Bluetooth: L2CAP socket layer initialized
[ 508.789916] Bluetooth: SCO socket layer initialized
[32964.257719] i2c /dev entries driver
[33316.733330] f71882fg: Found f81866a chip at 0x290, revision 32
[33316.733373] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213)
[33316.733380] ACPI: This conflict may cause random problems and system instability
[33316.733381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[33316.733388] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297]
[33316.742195] f71882fg: Device addition failed
[33325.377726] f71882fg: Found f81866a chip at 0x290, revision 32
[33325.377757] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213)
[33325.377763] ACPI: This conflict may cause random problems and system instability
[33325.377764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[33325.377770] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297]
[33325.386402] f71882fg: Device addition failed
[34391.474708] version 39.2
[34391.476864] ipmi device interface
[34395.191045] mei_me 0000:00:16.0: less data available than length=00000000.
[34804.940861] f71882fg: Found f81866a chip at 0x290, revision 32
[34804.940899] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213)
[34804.940907] ACPI: This conflict may cause random problems and system instability
[34804.940908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[34804.940916] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297]
[34804.950319] f71882fg: Device addition failed
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: BF9QAA05
board_vendor:
board_name:
board_version:
** Loaded modules:
acpi_tad
sbs
sbshc
acpi_pad
ac
acpi_ipmi
ipmi_devintf
ipmi_msghandler
lm78
hwmon_vid
bluetooth
drbg
ansi_cprng
ecdh_generic
rfkill
msr
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_set
xt_multiport
nft_compat
nf_tables
binfmt_misc
xfrm_user
xfrm4_tunnel
ipcomp
xfrm_ipcomp
esp4
ah4
af_key
xfrm_algo
sit
ip_gre
gre
ipip
tunnel4
8021q
garp
mrp
stp
llc
team_mode_loadbalance
team
intel_rapl
nls_ascii
nls_cp437
x86_pkg_temp_thermal
intel_powerclamp
vfat
fat
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
i915
mei_wdt
evdev
ghash_clmulni_intel
intel_cstate
drm_kms_helper
intel_uncore
intel_rapl_perf
efi_pstore
drm
efivars
mei_me
sg
serio_raw
pcspkr
mei
iTCO_wdt
iTCO_vendor_support
ip_set_hash_netport
video
button
pcc_cpufreq
ip_set_hash_ipport
ip_set_bitmap_port
ip_set_hash_net
ip_set_hash_ip
ip_set_list_set
ip_set_hash_netiface
ip_set
nfnetlink
mpls_iptunnel
mpls_router
fou
ip_tunnel
ip6_udp_tunnel
udp_tunnel
dummy
coretemp
sunrpc
loop
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
raid1
md_mod
sd_mod
crc32c_intel
ahci
libahci
libata
e1000e
psmouse
xhci_pci
ehci_pci
scsi_mod
ehci_hcd
lpc_ich
aesni_intel
xhci_hcd
aes_x86_64
crypto_simd
cryptd
glue_helper
usbcore
i2c_i801
igb
i2c_algo_bit
usb_common
dca
thermal
fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: df200000-df9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f7000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7f20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller [8086:8c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 92
Region 0: Memory at f7f38000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f7f36000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 05)
Subsystem: Intel Corporation Ethernet Connection I217-LM [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 39
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7f35000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI [8086:8c2d]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f34000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI [8086:8c26]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7f33000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Q87 Express LPC Controller [8086:8c4e] (rev 05)
Subsystem: Intel Corporation Q87 Express LPC Controller [8086:8c4e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7f32000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f31000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521]
Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df200000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at df800000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at df600000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
01:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521]
Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at df300000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at df844000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at df680000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
01:00.2 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521]
Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df400000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at df888000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at df700000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
01:00.3 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521]
Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at df8cc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at df780000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
03:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7c80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e020 [size=32]
Region 3: Memory at f7d04000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7c00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
03:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f7b80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7b00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
04:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
Subsystem: Intel Corporation I211 Gigabit Network Connection [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at f7e20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-4-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-4-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-3
Versions of packages linux-image-4.19.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-16
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-4-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: