[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#926221: linux-image-4.19.0-4-amd64: i8042 device not loaded for ps/2 keyboard



Package: src:linux
Version: 4.19.28-2
Severity: important

Dear Maintainer,

   * What led up to the situation?
    A fresh installation of buster. On about the 3 reboot of the
    fresh install the ps/2 keyboard was inactive on the console login.
    I have not seen this problem on jessie or stretch on the fresh installs of
    these versions a week ago on the same test box.
   * What exactly did you do (or not do) that was effective (or ineffective)?
    Plugged a usb keyboard then rebooted.
   * What was the outcome of this action?
    The usb keyboard operated correctly. The ps/2 keyboard operates correctly
    during the grub screen but is then inactive on the console login. The keyboard
    failure appears to be random. When the ps/2 keyboard is inactive
    /sys/devices/platform/i8042 does not exist. 
   * What outcome did you expect instead?
    Expect ps/2 keyboard operation on each reboot, but the ps/2 keyboard
    seems to fail on one reboot out of five or six. The grub screen
    has correct ps/2 keyboard operation consistently, then when booting through
    to the cosole login, the ps/2 keyboard becomes inactive and the i8042 device 
    does not exist. When plugged, the usb keyboard operates correctly each time.


-- Package-specific info:
** Version:
Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)

** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=/dev/mapper/vgBuster-lvBusterRoot ro quiet

** Not tainted

** Kernel log:
[    6.055661] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    6.125325] random: crng init done
[    7.419050] systemd[1]: Inserted module 'autofs4'
[    7.544582] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.562304] systemd[1]: Detected architecture x86-64.
[    7.572764] systemd[1]: Set hostname to <linda>.
[    9.777803] systemd[1]: Unnecessary job for /dev/mapper/vgBuster-lvBusterUsr was removed.
[    9.778286] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.778469] systemd[1]: Listening on udev Kernel Socket.
[    9.778668] systemd[1]: Listening on Journal Audit Socket.
[    9.780143] systemd[1]: Created slice system-getty.slice.
[    9.780247] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    9.780522] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.075597] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   10.111477] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   10.669333] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[   10.669338] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWRE) (20180810/utaddress-213)
[   10.669343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.412153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   11.412165] ACPI: Power Button [PWRB]
[   11.412209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   11.412226] ACPI: Power Button [PWRF]
[   11.977000] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   12.119910] parport_pc 00:02: reported by Plug and Play ACPI
[   12.119975] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   12.187159] ppdev: user-space parallel port driver
[   12.216182] iTCO_vendor_support: vendor-support=0
[   12.277228] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   12.277229] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   12.277230] RAPL PMU: hw unit of domain package 2^-16 Joules
[   12.277231] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   12.313231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.313272] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   12.313357] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.355272] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.355302] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   12.355329] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   12.956283] asus_wmi: ASUS WMI generic driver loaded
[   13.077383] asus_wmi: Initialization: 0x0
[   13.077408] asus_wmi: BIOS WMI version: 0.9
[   13.077445] asus_wmi: SFUN value: 0x0
[   13.077748] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[   13.078150] asus_wmi: Number of fans: 1
[   14.985312] [drm] Replacing VGA console driver
[   14.985788] Console: switching to colour dummy device 80x25
[   14.986777] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.986778] [drm] Driver supports precise vblank timestamp query.
[   14.987158] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   15.071343] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[   15.071852] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.071946] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   15.096671] fbcon: inteldrmfb (fb0) is primary device
[   15.167843] Console: switching to colour frame buffer device 210x65
[   15.190706] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.202551] kvm: disabled by bios
[   15.311829] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   15.752700] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   15.752703] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.752705] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.752706] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.752708] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   15.752709] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.752711] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   15.752712] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   15.752713] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   15.766254] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   15.766309] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   15.766354] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.771104] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.772593] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.922038] Adding 974844k swap on /dev/mapper/vg_linda_stretch-lv_swap.  Priority:-2 extents:1 across:974844k FS
[   15.982824] intel_rapl: Found RAPL domain package
[   15.982827] intel_rapl: Found RAPL domain core
[   15.982828] intel_rapl: Found RAPL domain uncore
[   15.982832] intel_rapl: RAPL package 0 domain package locked by BIOS
[   18.383226] Adding 974844k swap on /dev/mapper/vgBuster-lvBusterSwap.  Priority:-3 extents:1 across:974844k FS
[   18.728336] EXT4-fs (dm-3): mounting ext2 file system using the ext4 subsystem
[   19.385785] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
[   20.709623] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   20.917896] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   20.926257] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   21.927374] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   22.074589] systemd-journald[230]: Received request to flush runtime journal from PID 1
[   26.588765] audit: type=1400 audit(1554194542.812:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=472 comm="apparmor_parser"
[   26.588769] audit: type=1400 audit(1554194542.812:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=472 comm="apparmor_parser"
[   26.590336] audit: type=1400 audit(1554194542.816:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=473 comm="apparmor_parser"
[   26.590339] audit: type=1400 audit(1554194542.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=473 comm="apparmor_parser"
[   26.590341] audit: type=1400 audit(1554194542.816:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=473 comm="apparmor_parser"
[   30.200063] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   30.200292] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[   30.379651] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   32.596149] r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   32.596159] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   67.198183] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[   67.321693] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[   67.321696] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   67.321699] usb 2-1.6: Product: HP Basic USB Keyboard
[   67.321701] usb 2-1.6: Manufacturer: CHICONY
[   67.331824] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:03F0:0024.0002/input/input11
[   67.390395] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.6/input0

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0704
board_vendor: ASUSTeK Computer INC.
board_name: P8H61-M LE
board_version: Rev x.0x

** Loaded modules:
intel_rapl
snd_hda_codec_realtek
x86_pkg_temp_thermal
intel_powerclamp
snd_hda_codec_generic
snd_hda_intel
i915
snd_hda_codec
kvm
snd_hda_core
snd_hwdep
irqbypass
crct10dif_pclmul
drm_kms_helper
snd_pcm
eeepc_wmi
crc32_pclmul
asus_wmi
snd_timer
sparse_keymap
rfkill
ghash_clmulni_intel
drm
intel_cstate
snd
mei_me
wmi_bmof
intel_uncore
sg
wmi
iTCO_wdt
intel_rapl_perf
soundcore
iTCO_vendor_support
ppdev
parport_pc
mei
i2c_algo_bit
evdev
pcspkr
parport
pcc_cpufreq
video
button
nct6775
hwmon_vid
coretemp
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
dm_mod
sr_mod
cdrom
sd_mod
hid_generic
usbhid
ata_generic
hid
ata_piix
libata
crc32c_intel
lpc_ich
scsi_mod
i2c_i801
ehci_pci
ehci_hcd
usbcore
r8169
realtek
libphy
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug enp4s0
iface enp4s0 inet dhcp
# This is an autoconfigured IPv6 interface
iface enp4s0 inet6 auto

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 14:da:e9:b6:66:cd brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.125/24 brd 192.168.1.255 scope global dynamic enp4s0
       valid_lft 3121sec preferred_lft 3121sec
    inet6 2001:8003:7919:d700:16da:e9ff:feb6:66cd/64 scope global dynamic mngtmpaddr 
       valid_lft 44246sec preferred_lft 44246sec
    inet6 fe80::16da:e9ff:feb6:66cd/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
enp4s0: 7563636   10496    0    0    0     0          0        13  1246753    8352    0    0    0     0       0          0
    lo:     156       4    0    0    0     0          0         0      156       4    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    2911 total packets received
    2 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    2909 incoming packets delivered
    3214 requests sent out
    40 dropped because of missing route
Icmp:
    0 ICMP messages received
    0 input ICMP message failed
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    193 active connection openings
    0 passive connection openings
    0 failed connection attempts
    1 connection resets received
    22 connections established
    9625 segments received
    7733 segments sent out
    0 segments retransmitted
    0 bad segments received
    93 resets sent
Udp:
    556 packets received
    0 packets to unknown port received
    0 packet receive errors
    556 packets sent
    0 receive buffer errors
    0 send buffer errors
    IgnoredMulti: 2
UdpLite:
TcpExt:
    88 TCP sockets finished time wait in fast timer
    134 delayed acks sent
    Quick ack mode was activated 6 times
    6752 packet headers predicted
    1369 acknowledgments not containing data payload received
    1125 predicted acknowledgments
    Detected reordering 77 times using SACK
    TCPDSACKOldSent: 3
    TCPDSACKRecv: 7
    22 connections reset due to unexpected data
    1 connections reset due to early user close
    TCPDSACKIgnoredNoUndo: 7
    TCPSackShiftFallback: 67
    TCPRcvCoalesce: 2223
    TCPAutoCorking: 69
    TCPOrigDataSent: 2432
    TCPKeepAlive: 428
    TCPDelivered: 2519
IpExt:
    InMcastPkts: 6
    OutMcastPkts: 8
    InBcastPkts: 2
    InOctets: 1244347
    OutOctets: 331037
    InMcastOctets: 1356
    OutMcastOctets: 1436
    InBcastOctets: 488
    InNoECTPkts: 2972


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
	Subsystem: ASUSTeK Computer Inc. P8P67/P8H67 Series Motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: snb_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at fe407000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fe406000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller [1043:8445]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 26
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 27
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 28
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 29
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fe405000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05)
	Subsystem: ASUSTeK Computer Inc. H61 Express Chipset LPC Controller [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering])
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3) [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at f110 [size=8]
	Region 1: I/O ports at f100 [size=4]
	Region 2: I/O ports at f0f0 [size=8]
	Region 3: I/O ports at f0e0 [size=4]
	Region 4: I/O ports at f0d0 [size=16]
	Region 5: I/O ports at f0c0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, ata_generic

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe404000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [PCI native mode-only controller, supports bus mastering])
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5) [1043:844d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at f0b0 [size=8]
	Region 1: I/O ports at f0a0 [size=4]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f070 [size=16]
	Region 5: I/O ports at f060 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, ata_generic

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at e000 [size=256]
	Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

06:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>


** USB devices:
Bus 002 Device 004: ID 03f0:0024 HP, Inc KU-0316 Keyboard
Bus 002 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-4-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133
ii  kmod                                    26-1
ii  linux-base                              4.5

Versions of packages linux-image-4.19.0-4-amd64 recommends:
ii  apparmor             2.13.2-9
ii  firmware-linux-free  3.4
ii  irqbalance           1.5.0-3

Versions of packages linux-image-4.19.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02+dfsg1-13
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-4-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20190114-1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: