[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#697029: marked as done (linux-image-3.2.0-4-amd64: i915_hangcheck_ring_idle error makes the computer lag using intel core i7-620 integrated gpu)



Your message dated Mon, 04 Mar 2019 20:59:46 +0000
with message-id <19ee79cbbf3800a128c9bc34481e391afa4dfb96.camel@decadent.org.uk>
and subject line Re: linux-image-3.2.0-4-amd64: i915_hangcheck_ring_idle error makes the computer lag using intel core i7-620 integrated gpu
has caused the Debian Bug report #697029,
regarding linux-image-3.2.0-4-amd64: i915_hangcheck_ring_idle error makes the computer lag using intel core i7-620 integrated gpu
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
697029: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=697029
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.35-2
Severity: grave
Justification: renders package unusable

I upgraded my laptop from sqeeze to wheezy.
When using gnome the computer become sluggish after a few minutes. dmesg is
full of : " [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed...
render ring idle [waiting on 75118, at 75120], missed IRQ?"
If I log out and use gnome classic, the problem does not happen.
After some search on the internet, I foud this thread that seems related :
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/761065
I tried to set /sys/module/i915/parameters/semaphores to 1 without any
modifications.
under gnome classic, using "vblank_mode=0 glxgears" in a terminal lead to the
same symptoms.



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4389375a-dcb2-4f5d-a97a-3dccc151327e ro quiet irqpoll i915.semaphores=1

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[ 3440.056876] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.057142] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[ 3440.057315] CPU1 is up
[ 3440.057434] Booting Node 0 Processor 2 APIC 0x1
[ 3440.057435] smpboot cpu 2: start_ip = 95000
[ 3440.068475] Calibrating delay loop (skipped) already calibrated this CPU
[ 3440.068498] CPU2: Thermal monitoring handled by SMI
[ 3440.088882] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.089152] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 3440.089329] CPU2 is up
[ 3440.089463] Booting Node 0 Processor 3 APIC 0x5
[ 3440.089464] smpboot cpu 3: start_ip = 95000
[ 3440.100493] Calibrating delay loop (skipped) already calibrated this CPU
[ 3440.100513] CPU3: Thermal monitoring handled by SMI
[ 3440.121137] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.121590] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[ 3440.121878] CPU3 is up
[ 3440.124455] ACPI: Waking up from system sleep state S3
[ 3440.317339] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 3440.317669] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 3440.318261] PM: early resume of devices complete after 1.155 msecs
[ 3440.318399] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 3440.318420] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3440.318431] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3440.318464] pci 0000:00:1e.0: setting latency timer to 64
[ 3440.318470] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3440.318494] ahci 0000:00:1f.2: setting latency timer to 64
[ 3440.318680] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 3440.318699] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3440.318722] sd 0:0:0:0: [sda] Starting disk
[ 3440.352446] i915 0000:00:02.0: setting latency timer to 64
[ 3440.572500] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 3440.636264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3440.820199] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3440.820256] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 3440.924410] usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
[ 3440.992001] ata5: SATA link down (SStatus 0 SControl 300)
[ 3440.992040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3440.992080] ata6: SATA link down (SStatus 0 SControl 300)
[ 3440.992115] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3440.997252] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3440.997392] ata1.00: configured for UDMA/100
[ 3441.016789] ata2.00: configured for UDMA/100
[ 3441.099023] dell_wmi: Received unknown WMI event (0x11)
[ 3441.276156] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd
[ 3441.440160] usb 2-1.7: reset full-speed USB device number 5 using ehci_hcd
[ 3441.534325] btusb 2-1.7:1.0: no reset_resume for driver btusb?
[ 3441.534330] btusb 2-1.7:1.1: no reset_resume for driver btusb?
[ 3442.219238] PM: resume of devices complete after 1901.679 msecs
[ 3442.219587] PM: Finishing wakeup.
[ 3442.219589] Restarting tasks ... done.
[ 3442.244987] dell_wmi: Received unknown WMI event (0x11)
[ 3442.248552] video LNXVIDEO:00: Restoring backlight state
[ 3443.311377] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3443.367218] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3443.367657] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3443.369132] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3443.369319] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 3443.518686] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3443.521861] ADDRCONF(NETDEV_UP): wwan0: link is not ready
[ 3450.023676] wlan0: authenticate with 3e:f6:4b:3f:7e:58 (try 1)
[ 3450.026328] wlan0: authenticated
[ 3450.026666] wlan0: associate with 3e:f6:4b:3f:7e:58 (try 1)
[ 3450.035765] wlan0: RX AssocResp from 3e:f6:4b:3f:7e:58 (capab=0x411 status=0 aid=2)
[ 3450.035770] wlan0: associated
[ 3450.043220] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3456.613927] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 3e:f6:4b:3f:7e:58 tid = 0
[ 3461.383924] wlan0: no IPv6 routers present
[ 3615.925491] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75118, at 75120], missed IRQ?
[ 3618.282908] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75138, at 75141], missed IRQ?
[ 3619.791809] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75156, at 75158], missed IRQ?
[ 3621.296703] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75162, at 75164], missed IRQ?
[ 3622.801600] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75168, at 75170], missed IRQ?
[ 3624.306498] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75171, at 75175], missed IRQ?
[ 3625.811401] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75180, at 75182], missed IRQ?
[ 3627.316276] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75191, at 75193], missed IRQ?
[ 3628.821193] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75195, at 75198], missed IRQ?
[ 3630.326105] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75200, at 75203], missed IRQ?
[ 3631.830991] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75205, at 75208], missed IRQ?
[ 3633.355889] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75218, at 75220], missed IRQ?
[ 3634.864800] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75231, at 75234], missed IRQ?
[ 3636.369682] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75240, at 75242], missed IRQ?
[ 3637.874571] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75251, at 75253], missed IRQ?
[ 3639.383468] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75262, at 75264], missed IRQ?
[ 3640.928404] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75286, at 75290], missed IRQ?
[ 3642.433304] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75296, at 75298], missed IRQ?
[ 3643.938216] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75300, at 75303], missed IRQ?
[ 3645.443082] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75305, at 75308], missed IRQ?
[ 3646.947998] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75314, at 75316], missed IRQ?
[ 3648.452889] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75320, at 75324], missed IRQ?
[ 3649.957809] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75325, at 75327], missed IRQ?
[ 3651.462695] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75329, at 75332], missed IRQ?
[ 3652.967593] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75335, at 75337], missed IRQ?
[ 3654.472487] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75339, at 75342], missed IRQ?
[ 3655.993411] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75352, at 75354], missed IRQ?
[ 3657.498311] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75360, at 75362], missed IRQ?
[ 3659.003197] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75369, at 75372], missed IRQ?
[ 3660.516095] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75396, at 75398], missed IRQ?
[ 3662.021001] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75402, at 75406], missed IRQ?
[ 3663.525905] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75407, at 75409], missed IRQ?

** Model information
sys_vendor: Dell Inc.
product_name: Latitude E4310
product_version: 0001
chassis_vendor: Dell Inc.
chassis_version:  
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 04HKYP
board_version: A00

** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
ppdev
lp
snd_hrtimer
bnep
rfcomm
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
binfmt_misc
uinput
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_idt
btusb
bluetooth
cdc_ether
usbnet
cdc_acm
mii
cdc_wdm
usbhid
hid
joydev
uvcvideo
videodev
v4l2_compat_ioctl32
media
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
iwlwifi
coretemp
mac80211
snd
i915
crc32c_intel
sg
dell_wmi
sparse_keymap
i2c_i801
drm_kms_helper
cfg80211
drm
ehci_hcd
psmouse
sdhci_pci
parport_pc
acpi_cpufreq
sdhci
dell_laptop
iTCO_wdt
sr_mod
ghash_clmulni_intel
aesni_intel
aes_x86_64
cdrom
aes_generic
i2c_algo_bit
rfkill
evdev
cryptd
e1000e
dcdbas
mmc_core
serio_raw
pcspkr
i2c_core
soundcore
usbcore
intel_ips
parport
iTCO_vendor_support
mperf
usb_common
wmi
video
battery
button
ac
processor
power_supply
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
microcode
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 60b0 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f54b0000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 60a0 [size=8]
	Region 1: Memory at f5490000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f5400000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f5480000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 6040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f5470000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b57] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f5460000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f4000000-f53fffff
	Prefetchable memory behind bridge: 00000000f5b00000-00000000f5cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f2c00000-f3ffffff
	Prefetchable memory behind bridge: 00000000f5900000-00000000f5afffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f1800000-f2bfffff
	Prefetchable memory behind bridge: 00000000f5700000-00000000f58fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0400000-f17fffff
	Prefetchable memory behind bridge: 00000000f5500000-00000000f56fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f5450000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller [8086:3b0f] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 40
	Region 0: I/O ports at 6090 [size=8]
	Region 1: I/O ports at 6080 [size=4]
	Region 2: I/O ports at 6070 [size=8]
	Region 3: I/O ports at 6060 [size=4]
	Region 4: I/O ports at 6020 [size=32]
	Region 5: Memory at f5440000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f5430000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 6000 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f5420000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel ips

02:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:422b] (rev 35)
	Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f2c00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

03:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f1800000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0461:4db1 Primax Electronics, Ltd 
Bus 002 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 002 Device 004: ID 413c:8184 Dell Computer Corp. F3607gw v2 Mobile Broadband Module
Bus 002 Device 005: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module
Bus 002 Device 006: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor


-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'testing-proposed-updates')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.48
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                2:4.05+dfsg-6+deb7u1
ii  grub-pc                 1.99-23.1
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.36
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:

--- End Message ---
--- Begin Message ---
This was identified as caused by a workaround for a hardware defect. 
An alternate workaround is to disable use of the IOMMU for the GPU.

Ben.

-- 
Ben Hutchings
A free society is one where it is safe to be unpopular.
                                                      - Adlai Stevenson


Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---

Reply to: