Bug#919920: clock far in the future after suspend/resume
Package: src:linux
Version: 4.19.12-1
Severity: important
Tags: upstream
Hi,
usually, after resuming from suspend, the clock on my machine is way
ahead, causing all sorts of havoc. Especially when being offline, there
is also no good way to correct this issue.
Cheers,
Toni
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=/dev/mapper/ev0-root ro quiet
** Not tainted
** Kernel log:
[ 49.398869] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 49.398870] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 49.398870] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 49.458102] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 49.458166] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 49.458224] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 49.458271] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 49.458324] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 49.458375] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 49.934113] Bluetooth: hci0: Waiting for firmware download to complete
[ 49.934183] Bluetooth: hci0: Firmware loaded in 1552005 usecs
[ 49.934227] Bluetooth: hci0: Waiting for device to boot
[ 49.947398] Bluetooth: hci0: Device booted in 12885 usecs
[ 49.947444] bluetooth hci0: firmware: direct-loading firmware intel/ibt-18-16-1.ddc
[ 49.947446] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 49.952704] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 50.417916] Console: switching to colour frame buffer device 480x135
[ 50.449962] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 57.269823] IPv6: ADDRCONF(NETDEV_UP): wlp59s0: link is not ready
[ 57.966244] IPv6: ADDRCONF(NETDEV_UP): wlp59s0: link is not ready
[ 66.863361] wlp59s0: authenticate with c0:3e:0f:ac:54:8d
[ 66.880393] wlp59s0: send auth to c0:3e:0f:ac:54:8d (try 1/3)
[ 66.919492] wlp59s0: authenticated
[ 66.923155] wlp59s0: associate with c0:3e:0f:ac:54:8d (try 1/3)
[ 66.927698] wlp59s0: RX AssocResp from c0:3e:0f:ac:54:8d (capab=0x1411 status=0 aid=1)
[ 66.934797] wlp59s0: associated
[ 66.965915] IPv6: ADDRCONF(NETDEV_CHANGE): wlp59s0: link becomes ready
[ 66.975044] DROP UNMATCHED OUT-world:IN= OUT=wlp59s0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=143 CODE=0 MARK=0x94
[ 66.983873] wlp59s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c0:3e:0f:ac:54:8d
[ 75.739408] pci_raw_set_power_state: 19 callbacks suppressed
[ 75.739413] nouveau 0000:01:00.0: Refused to change power state, currently in D3
[ 76.172896] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/fecs_bl.bin
[ 76.173220] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/fecs_inst.bin
[ 76.173372] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/fecs_data.bin
[ 76.173388] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/fecs_sig.bin
[ 76.173406] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/gpccs_bl.bin
[ 76.173615] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/gpccs_inst.bin
[ 76.173766] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/gpccs_data.bin
[ 76.173781] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/gr/gpccs_sig.bin
[ 76.174174] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/sec2/image.bin
[ 76.174210] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/sec2/desc.bin
[ 76.174228] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/sec2/sig.bin
[ 76.175037] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/acr/ucode_load.bin
[ 76.175292] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/acr/ucode_unload.bin
[ 76.175357] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/acr/bl.bin
[ 76.175387] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/acr/unload_bl.bin
[ 76.175638] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp107/nvdec/scrubber.bin
[ 76.175764] nouveau 0000:01:00.0: secboot: VPR scrubber binary failed!
[ 76.175776] nouveau 0000:01:00.0: gr: init failed, -22
** Model information
sys_vendor: Dell Inc.
product_name: Precision 5530
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.6.0
board_vendor: Dell Inc.
board_name: 0FP2W2
board_version: A00
** Loaded modules:
ctr
ccm
ifb
sch_fq_codel
cmac
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
nft_chain_route_ipv6
nf_log_ipv6
nft_chain_route_ipv4
devlink
xt_connmark
nf_log_ipv4
nf_log_common
nft_limit
nft_counter
xt_helper
xt_LOG
xt_limit
xt_conntrack
xt_tcpudp
nft_compat
nf_conntrack_sip
nf_conntrack_ftp
nf_conntrack_irc
nf_conntrack_pptp
nf_conntrack_proto_gre
ip6_tables
appletalk
psnap
llc
ax25
arc4
bnep
fuse
openvswitch
nsh
nf_nat_ipv6
nf_nat_ipv4
nf_conncount
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
nfnetlink
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
ext4
mbcache
jbd2
fscrypto
ecb
dell_rbtn
snd_hda_intel
intel_rapl
snd_hda_codec
x86_pkg_temp_thermal
snd_hda_core
intel_powerclamp
iwlmvm
btusb
uvcvideo
coretemp
btrtl
videobuf2_vmalloc
btbcm
videobuf2_memops
mac80211
kvm_intel
btintel
bluetooth
nouveau
efi_pstore
kvm
snd_hwdep
irqbypass
i915
videobuf2_v4l2
drbg
snd_pcm
dell_laptop
iwlwifi
dell_wmi
videobuf2_common
ttm
intel_cstate
dell_smbios
ansi_cprng
snd_timer
dcdbas
videodev
ucsi_acpi
mei_me
rtsx_pci_ms
dell_smm_hwmon
intel_uncore
drm_kms_helper
snd
media
ecdh_generic
dell_wmi_descriptor
typec_ucsi
cfg80211
intel_rapl_perf
crc16
serio_raw
wmi_bmof
iTCO_wdt
mxm_wmi
evdev
drm
soundcore
memstick
pcspkr
iTCO_vendor_support
efivars
hid_multitouch
processor_thermal_device
mei
rfkill
joydev
idma64
i2c_algo_bit
typec
intel_soc_dts_iosf
intel_pch_thermal
battery
int3403_thermal
int340x_thermal_zone
dell_smo8800
video
wmi
intel_hid
int3400_thermal
pcc_cpufreq
acpi_thermal_rel
sparse_keymap
button
acpi_pad
ac
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
btrfs
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
libcrc32c
crc32c_generic
algif_skcipher
af_alg
dm_crypt
dm_mod
wacom
usbhid
hid_generic
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
rtsx_pci_sdmmc
mmc_core
ahci
xhci_pci
libahci
xhci_hcd
libata
aesni_intel
aes_x86_64
crypto_simd
cryptd
usbcore
glue_helper
scsi_mod
psmouse
nvme
rtsx_pci
nvme_core
i2c_i801
i2c_hid
intel_lpss_pci
hid
intel_lpss
usb_common
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers [8086:3ec4] (rev 07)
Subsystem: Dell 8th Gen Core Processor Host Bridge/DRAM Registers [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: ec000000-ed0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] (prog-if 00 [VGA controller])
Subsystem: Dell UHD Graphics 630 (Mobile) [1028:087d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 154
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:087d]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed510000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
Subsystem: Dell Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [1028:087d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ed528000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:12.0 Signal processing controller [1180]: Intel Corporation Cannon Lake PCH Thermal Controller [8086:a379] (rev 10)
Subsystem: Dell Cannon Lake PCH Thermal Controller [1028:087d]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed527000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:14.0 USB controller [0c03]: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller [8086:a36d] (rev 10) (prog-if 30 [XHCI])
Subsystem: Dell Cannon Lake PCH USB 3.1 xHCI Host Controller [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 0: Memory at ed500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory [0500]: Intel Corporation Cannon Lake PCH Shared SRAM [8086:a36f] (rev 10)
Subsystem: Dell Cannon Lake PCH Shared SRAM [1028:087d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ed51e000 (64-bit, non-prefetchable) [disabled] [size=8K]
Region 2: Memory at ed526000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:15.0 Serial bus controller [0c80]: Intel Corporation Device [8086:a368] (rev 10)
Subsystem: Dell Device [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 7f800000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller [0c80]: Intel Corporation Device [8086:a369] (rev 10)
Subsystem: Dell Device [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 7f801000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Cannon Lake PCH HECI Controller [8086:a360] (rev 10)
Subsystem: Dell Cannon Lake PCH HECI Controller [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 139
Region 0: Memory at ed523000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:a353] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:087d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at ed51c000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at ed522000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 4090 [size=8]
Region 3: I/O ports at 4080 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at ed521000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a340] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=3a, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4000000-ea0fffff
Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a338] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0
Memory behind bridge: ed400000-ed4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a33c] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 125
Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0
Memory behind bridge: ed300000-ed3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a330] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 126
Bus: primary=00, secondary=3d, subordinate=3d, sec-latency=0
Memory behind bridge: ed200000-ed2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a30e] (rev 10)
Subsystem: Dell Device [1028:087d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.3 Audio device [0403]: Intel Corporation Cannon Lake PCH cAVS [8086:a348] (rev 10) (prog-if 80)
Subsystem: Dell Cannon Lake PCH cAVS [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 156
Region 0: Memory at ed518000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ed100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Cannon Lake PCH SMBus Controller [8086:a323] (rev 10)
Subsystem: Dell Cannon Lake PCH SMBus Controller [1028:087d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed520000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller [8086:a324] (rev 10)
Subsystem: Dell Cannon Lake PCH SPI Controller [1028:087d]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]
01:00.0 3D controller [0302]: NVIDIA Corporation GP107GLM [Quadro P2000 Mobile] [10de:1cba] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 155
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
[virtual] Expansion ROM at ed000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
3b:00.0 Network controller [0280]: Intel Corporation Wireless-AC 9260 [8086:2526] (rev 29)
Subsystem: Intel Corporation Wireless-AC 9260 [8086:4010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
3c:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:087d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 1: Memory at ed300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
3d:00.0 Non-Volatile memory controller [0108]: Toshiba America Info Systems Device [1179:0116] (prog-if 02 [NVM Express])
Subsystem: Toshiba America Info Systems Device [1179:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0025 Intel Corp.
Bus 001 Device 003: ID 0c45:671d Microdia
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing'), (70, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-1-amd64 (SMP w/12 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.2-3
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-2
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-10
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
ii firmware-amd-graphics 20180825+dfsg-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20180825+dfsg-1
pn firmware-libertas <none>
ii firmware-linux-nonfree 20180825+dfsg-1
ii firmware-misc-nonfree 20180825+dfsg-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: