Bug#918800: linux-image-4.19.0-1-armmp-lpae: USB 3.0 network card operates only at USB 2.0 speed on Odroid HC1
Package: src:linux
Version: 4.19.12-1
Severity: normal
Dear Maintainer,
The Odroid HC1 ARM board contains a JMicron JMS578 USB 3.0 to SATA
Bridge and a Realtek Gbps Ethernet device connected to an USB 3.0 host.
The SATA bridge works correctly at USB 3.0 speed, but the Ethernet
controller operates only at USB 2.0 speed:
root@odroid:~# lsusb -t
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
I have tested linux 4.19.12-1 from Debian testing, 4.19.13-1 from
unstable and 4.20-1~exp1 from experimental. They all show the same
behavior.
-- Package-specific info:
** Version:
Linux version 4.19.0-1-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
** Command line:
net.ifnames=0 console=ttySAC2,115200n8
** Not tainted
** Kernel log:
root@odroid:~# dmesg | grep 'usb \?3'
[ 8.637794] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 8.645903] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[ 8.653300] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 8.672414] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 8.672550] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[ 8.672570] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 8.958202] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[ 8.963984] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[ 8.973066] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[ 8.978923] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[ 9.140610] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 9.153605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.170064] usb usb3: Product: xHCI Host Controller
[ 9.170074] usb usb3: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[ 9.181849] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 9.766820] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 9.919833] usb 3-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 9.926565] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 9.933682] usb 3-1: Product: USB 10/100/1000 LAN
[ 9.938356] usb 3-1: Manufacturer: Realtek
[ 9.942417] usb 3-1: SerialNumber: 000001000000
[ 14.805113] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
Full kernel log is attached.
** Model information
Hardware : SAMSUNG EXYNOS (Flattened Device Tree)
Revision : 0000
Device Tree model: Hardkernel Odroid HC1
** Loaded modules:
cdc_ether
usbnet
r8152
mii
sg
pwm_samsung
exynos_trng
rng_core
s3c2410_wdt
leds_pwm
cpufreq_dt
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
uas
usb_storage
scsi_mod
xhci_plat_hcd
xhci_hcd
dwc3
udc_core
phy_generic
clk_s2mps11
s2mps11
phy_exynos_mipi_video
dwc3_exynos
phy_exynos_dp_video
ohci_exynos
ohci_hcd
ehci_exynos
ehci_hcd
dw_mmc_exynos
dw_mmc_pltfm
i2c_exynos5
usbcore
dw_mmc
phy_exynos_usb2
phy_exynos5_usbdrd
** PCI devices:
not available
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: armhf (armv7l)
Kernel: Linux 4.19.0-1-armmp-lpae (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-armmp-lpae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-armmp-lpae recommends:
ii apparmor 2.13.2-3
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-armmp-lpae suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-armmp-lpae is related to:
ii firmware-amd-graphics 20180825+dfsg-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20180825+dfsg-1
ii firmware-misc-nonfree 20180825+dfsg-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.19.0-1-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=30c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x00000000bd800000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] On node 0 totalpages: 518656
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 322048 pages, LIFO batch:63
[ 0.000000] Running under secure firmware.
[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x528 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39756 r8192 d21684 u69632
[ 0.000000] pcpu-alloc: s39756 r8192 d21684 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
[ 0.000000] Kernel command line: net.ifnames=0 console=ttySAC2,115200n8
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2001184K/2074624K available (10240K kernel code, 1130K rwdata, 2600K rodata, 2048K init, 310K bss, 57056K reserved, 16384K cma-reserved, 1271808K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (12256 kB)
.init : 0x(ptrval) - 0x(ptrval) (2048 kB)
.data : 0x(ptrval) - 0x(ptrval) (1131 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 311 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 33476 entries in 99 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000034] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[ 0.006208] Console: colour dummy device 80x30
[ 0.006284] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.006305] pid_max: default: 32768 minimum: 301
[ 0.006577] Security Framework initialized
[ 0.006593] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006722] AppArmor: AppArmor initialized
[ 0.006834] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006857] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008173] CPU: Testing write buffer coherency: ok
[ 0.009088] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.010058] Setting up static identity map for 0x40400000 - 0x404000a0
[ 0.010719] ARM CCI driver probed
[ 0.010960] Exynos MCPM support installed
[ 0.013373] rcu: Hierarchical SRCU implementation.
[ 0.018245] EFI services will not be available.
[ 0.019027] smp: Bringing up secondary CPUs ...
[ 0.020090] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.021262] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.022394] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.023554] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.023563] CPU4: Spectre v2: incorrect context switching function, system vulnerable
[ 0.024932] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.024940] CPU5: Spectre v2: incorrect context switching function, system vulnerable
[ 0.026168] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.026176] CPU6: Spectre v2: incorrect context switching function, system vulnerable
[ 0.027387] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.027395] CPU7: Spectre v2: incorrect context switching function, system vulnerable
[ 0.027591] smp: Brought up 1 node, 8 CPUs
[ 0.027611] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.027623] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[ 0.027632] CPU: This may indicate a broken bootloader or firmware.
[ 0.029332] devtmpfs: initialized
[ 0.049407] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 0.049850] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.049878] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.051445] pinctrl core: initialized pinctrl subsystem
[ 0.054110] DMI not present or invalid.
[ 0.054661] NET: Registered protocol family 16
[ 0.057994] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.060549] audit: initializing netlink subsys (disabled)
[ 0.060898] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
[ 0.063249] No ATAGs?
[ 0.063587] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.063605] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.065306] Serial: AMBA PL011 UART driver
[ 0.118179] EXYNOS5420 PMU initialized
[ 0.140023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.150102] vgaarb: loaded
[ 0.152212] media: Linux media interface: v0.10
[ 0.152280] videodev: Linux video capture interface: v2.00
[ 0.152354] pps_core: LinuxPPS API ver. 1 registered
[ 0.152366] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.152396] PTP clock support registered
[ 0.154758] clocksource: Switched to clocksource mct-frc
[ 0.255320] VFS: Disk quotas dquot_6.6.0
[ 0.255435] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.256392] AppArmor: AppArmor Filesystem Enabled
[ 0.273938] NET: Registered protocol family 2
[ 0.275099] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.275151] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.275259] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.275442] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.275702] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.275761] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.276096] NET: Registered protocol family 1
[ 0.276146] PCI: CLS 0 bytes, default 64
[ 0.276828] Unpacking initramfs...
[ 0.770791] random: fast init done
[ 2.007851] Freeing initrd memory: 19364K
[ 2.008028] kvm [1]: HYP mode not available
[ 2.009192] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 2.010029] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 2.013935] Initialise system trusted keyrings
[ 2.014274] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 2.024839] zbud: loaded
[ 6.763168] Key type asymmetric registered
[ 6.763189] Asymmetric key parser 'x509' registered
[ 6.763283] bounce: pool size: 64 pages
[ 6.763366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 6.763638] io scheduler noop registered
[ 6.763653] io scheduler deadline registered
[ 6.763901] io scheduler cfq registered (default)
[ 6.763914] io scheduler mq-deadline registered
[ 6.791325] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 6.791347] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 6.795248] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 6.795268] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 6.796594] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 6.796612] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 6.801530] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 6.805148] Serial: AMBA driver
[ 6.805457] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[ 6.806113] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[ 6.806739] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[ 7.586024] console [ttySAC2] enabled
[ 7.590335] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[ 7.605418] libphy: Fixed MDIO Bus: probed
[ 7.609359] mousedev: PS/2 mouse device common for all mice
[ 7.623410] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.631061] NET: Registered protocol family 10
[ 7.659760] Segment Routing with IPv6
[ 7.662050] mip6: Mobile IPv6
[ 7.664945] NET: Registered protocol family 17
[ 7.669362] mpls_gso: MPLS GSO support
[ 7.673941] ThumbEE CPU extension supported.
[ 7.677330] Registering SWP/SWPB emulation handler
[ 7.683165] registered taskstats version 1
[ 7.686126] Loading compiled-in X.509 certificates
[ 7.945717] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 7.953858] zswap: loaded using pool lzo/zbud
[ 7.958656] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.013442] hctosys: unable to open rtc device (rtc0)
[ 8.017093] sr_init: No PMIC hook to init smartreflex
[ 8.060543] Freeing unused kernel memory: 2048K
[ 8.071143] Run /init as init process
[ 8.637794] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 8.645903] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[ 8.651183] Synopsys Designware Multimedia Card Interface Driver
[ 8.653300] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 8.653549] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[ 8.653675] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[ 8.658533] usbcore: registered new interface driver usbfs
[ 8.658689] usbcore: registered new interface driver hub
[ 8.659107] usbcore: registered new device driver usb
[ 8.663862] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 8.664615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.666881] ehci-exynos: EHCI EXYNOS driver
[ 8.667505] exynos-ehci 12110000.usb: EHCI Host Controller
[ 8.667544] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 8.669034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.671046] ohci-exynos: OHCI EXYNOS driver
[ 8.672414] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 8.672550] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[ 8.672570] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 8.678535] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 8.685773] exynos-ohci 12120000.usb: USB Host Controller
[ 8.780585] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[ 8.781197] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 8.781609] exynos-ehci 12110000.usb: irq 84, io mem 0x12110000
[ 8.789890] exynos-ohci 12120000.usb: irq 84, io mem 0x12120000
[ 8.794542] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 8.794613] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[ 8.794833] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 8.795309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 8.795320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.795330] usb usb1: Product: EHCI Host Controller
[ 8.795339] usb usb1: Manufacturer: Linux 4.19.0-1-armmp-lpae ehci_hcd
[ 8.795346] usb usb1: SerialNumber: 12110000.usb
[ 8.829087] hub 1-0:1.0: USB hub found
[ 8.837535] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[ 8.842493] hub 1-0:1.0: 3 ports detected
[ 8.847480] thermal thermal_zone0: failed to read out thermal zone (-22)
[ 8.849500] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 8.860764] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 8.863271] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 8.868723] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[ 8.872710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.872719] usb usb2: Product: USB Host Controller
[ 8.872727] usb usb2: Manufacturer: Linux 4.19.0-1-armmp-lpae ohci_hcd
[ 8.872734] usb usb2: SerialNumber: 12120000.usb
[ 8.929327] thermal thermal_zone1: failed to read out thermal zone (-22)
[ 8.929688] hub 2-0:1.0: USB hub found
[ 8.939482] hub 2-0:1.0: 3 ports detected
[ 8.943981] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[ 8.950244] thermal thermal_zone2: failed to read out thermal zone (-22)
[ 8.958202] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[ 8.963984] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[ 8.973066] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[ 8.978374] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 8.978923] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[ 8.995578] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
[ 9.003711] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[ 9.003747] usb_phy_generic usb_phy_generic.1.auto: usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 9.003935] usb_phy_generic usb_phy_generic.2.auto: usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[ 9.004039] usb_phy_generic usb_phy_generic.2.auto: Linked as a consumer to regulator.0
[ 9.004543] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[ 9.004643] usb_phy_generic usb_phy_generic.3.auto: Linked as a consumer to regulator.0
[ 9.005888] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[ 9.062880] usb_phy_generic usb_phy_generic.1.auto: Linked as a consumer to regulator.0
[ 9.072958] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[ 9.078459] thermal thermal_zone3: failed to read out thermal zone (-22)
[ 9.086397] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[ 9.091887] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 9.091901] thermal thermal_zone4: failed to read out thermal zone (-22)
[ 9.097133] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 3
[ 9.105230] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 9.112566] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 9.118370] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 9.127673] xhci-hcd xhci-hcd.4.auto: irq 147, io mem 0x12400000
[ 9.134024] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 9.140610] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 9.145388] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[ 9.153605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.163019] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[ 9.170064] usb usb3: Product: xHCI Host Controller
[ 9.170074] usb usb3: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[ 9.177123] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[ 9.181849] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 9.200707] hub 3-0:1.0: USB hub found
[ 9.203919] hub 3-0:1.0: 1 port detected
[ 9.208462] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 9.213241] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4
[ 9.215664] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 9.220873] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[ 9.236987] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.245157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 9.253179] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.260360] usb usb4: Product: xHCI Host Controller
[ 9.265220] usb usb4: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[ 9.271711] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 9.277352] hub 4-0:1.0: USB hub found
[ 9.280356] hub 4-0:1.0: 1 port detected
[ 9.285047] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 9.289678] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[ 9.298252] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 9.306712] xhci-hcd xhci-hcd.5.auto: irq 146, io mem 0x12000000
[ 9.311076] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 9.313389] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 9.322532] mmc0: new high speed SDHC card at address aaaa
[ 9.330556] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.330565] usb usb5: Product: xHCI Host Controller
[ 9.337277] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[ 9.343215] usb usb5: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[ 9.353197] mmcblk0: p1 p2
[ 9.358978] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 9.359796] hub 5-0:1.0: USB hub found
[ 9.370382] hub 5-0:1.0: 1 port detected
[ 9.374916] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 9.379705] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[ 9.387533] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 9.394016] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.402161] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 9.410201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.417393] usb usb6: Product: xHCI Host Controller
[ 9.422234] usb usb6: Manufacturer: Linux 4.19.0-1-armmp-lpae xhci-hcd
[ 9.428732] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 9.435288] hub 6-0:1.0: USB hub found
[ 9.437611] hub 6-0:1.0: 1 port detected
[ 9.766820] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 9.919833] usb 3-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 9.926565] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 9.933682] usb 3-1: Product: USB 10/100/1000 LAN
[ 9.938356] usb 3-1: Manufacturer: Realtek
[ 9.942417] usb 3-1: SerialNumber: 000001000000
[ 10.465758] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 10.470986] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 10.502804] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[ 10.906885] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 10.932298] usb 6-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.01
[ 10.939025] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.946131] usb 6-1: Product: USB to ATA/ATAPI Bridge
[ 10.951156] usb 6-1: Manufacturer: JMicron
[ 10.955221] usb 6-1: SerialNumber: 0123456789ABCDEF
[ 10.982129] SCSI subsystem initialized
[ 10.991070] usbcore: registered new interface driver usb-storage
[ 11.033162] scsi host0: uas
[ 11.035658] usbcore: registered new interface driver uas
[ 11.036976] scsi 0:0:0:0: Direct-Access JMicron Generic 3101 PQ: 0 ANSI: 6
[ 11.557275] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 11.563343] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 11.568896] sd 0:0:0:0: [sda] Write Protect is off
[ 11.573291] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[ 11.573721] sd 0:0:0:0: [sda] Disabling FUA
[ 11.577445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.590937] sda: sda1
[ 11.595213] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.351081] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.665395] systemd[1]: System time before build time, advancing clock.
[ 12.706458] systemd[1]: Inserted module 'autofs4'
[ 12.743233] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 12.764096] systemd[1]: Detected architecture arm.
[ 12.799377] systemd[1]: Set hostname to <odroid>.
[ 13.182626] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.193837] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.199457] systemd[1]: Listening on Journal Audit Socket.
[ 13.218953] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.224823] systemd[1]: Listening on Journal Socket.
[ 13.260034] systemd[1]: Starting Load Kernel Modules...
[ 13.280840] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 13.303041] systemd[1]: Reached target System Time Synchronized.
[ 13.328568] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.355419] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.453979] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
[ 14.147878] systemd-journald[215]: Received request to flush runtime journal from PID 1
[ 14.392268] cpu cpu0: Linked as a consumer to regulator.44
[ 14.396428] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[ 14.396448] cpu cpu0: Dropping the link to regulator.44
[ 14.428329] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 14.430609] cpu cpu0: Linked as a consumer to regulator.44
[ 14.441527] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[ 14.451869] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[ 14.459696] cpu cpu4: Linked as a consumer to regulator.40
[ 14.469425] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[ 14.470865] random: crng init done
[ 14.478953] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.489224] leds_pwm pwmleds: unable to request PWM for blue:heartbeat: -517
[ 14.625063] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.637697] usbcore: registered new interface driver r8152
[ 14.648922] usbcore: registered new interface driver cdc_ether
[ 14.805113] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
[ 15.005684] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: discard
[ 15.019863] r8152 3-1:1.0 eth0: v1.09.9
[ 15.225039] audit: type=1400 audit(1545418415.556:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=274 comm="apparmor_parser"
[ 15.239175] audit: type=1400 audit(1545418415.556:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=274 comm="apparmor_parser"
[ 15.253431] audit: type=1400 audit(1545418415.556:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=274 comm="apparmor_parser"
[ 15.268156] audit: type=1400 audit(1545418415.560:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=273 comm="apparmor_parser"
[ 15.455885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.294027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.299555] r8152 3-1:1.0 eth0: carrier on
Reply to: