Bug#918142: linux-image-4.19.0-1-amd64: Can no longer disable the touchscreen module
Package: src:linux
Version: 4.19.12-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
upgraded to kernel 4.19 as part of regular debian apt update
* What exactly did you do (or not do) that was effective (or
ineffective)?
i added "blacklist hid_multitouch" to /etc/modprobe.d/blacklist.conf
* What was the outcome of this action?
no effect - the touchscreen is still active
* What outcome did you expect instead?
that the touchscreen was not active
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=9b57622f-6800-4162-a7df-46de6f9934ba ro quiet
** Not tainted
** Kernel log:
[ 6296.343484] ACPI: EC: EC stopped
[ 6296.343485] PM: Saving platform NVS memory
[ 6296.343537] Disabling non-boot CPUs ...
[ 6296.360186] IRQ 46: no longer affine to CPU1
[ 6296.361961] smpboot: CPU 1 is now offline
[ 6296.384158] IRQ 47: no longer affine to CPU2
[ 6296.385177] smpboot: CPU 2 is now offline
[ 6296.407964] IRQ 23: no longer affine to CPU3
[ 6296.407971] IRQ 42: no longer affine to CPU3
[ 6296.408991] smpboot: CPU 3 is now offline
[ 6296.414128] ACPI: Low-level resume complete
[ 6296.414175] ACPI: EC: EC started
[ 6296.414176] PM: Restoring platform NVS memory
[ 6296.414563] Enabling non-boot CPUs ...
[ 6296.414601] x86: Booting SMP configuration:
[ 6296.414602] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6296.415112] cache: parent cpu1 should not be sleeping
[ 6296.415333] CPU1 is up
[ 6296.415357] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6296.415799] cache: parent cpu2 should not be sleeping
[ 6296.415975] CPU2 is up
[ 6296.415997] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6296.416437] cache: parent cpu3 should not be sleeping
[ 6296.416618] CPU3 is up
[ 6296.420122] ACPI: Waking up from system sleep state S3
[ 6296.428828] ACPI: EC: interrupt unblocked
[ 6296.479402] usb usb1: root hub lost power or was reset
[ 6296.479409] usb usb2: root hub lost power or was reset
[ 6296.479463] ACPI: EC: event unblocked
[ 6296.482240] sd 0:0:0:0: [sda] Starting disk
[ 6296.725465] usb 3-1: reset high-speed USB device number 2 using ehci-pci
[ 6296.796875] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6296.833457] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[ 6296.885816] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[ 6296.915388] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[ 6297.029537] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6297.029541] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6297.029544] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6297.029642] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 6297.032193] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6297.032198] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6297.032201] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6297.032262] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 6297.033747] ata1.00: configured for UDMA/133
[ 6297.109557] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 6297.177507] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci
[ 6297.385614] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 6297.661569] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
[ 6297.812178] acpi LNXPOWER:02: Turning OFF
[ 6297.812595] OOM killer enabled.
[ 6297.812598] Restarting tasks ... done.
[ 6297.859330] PM: suspend exit
[ 6298.009230] e1000e: enp0s25 NIC Link is Down
[ 6298.096772] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6298.313640] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6298.318509] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6298.325015] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6298.330253] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6298.507043] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6299.989373] Bluetooth: hci0: command 0xfc05 tx timeout
[ 6299.989377] Bluetooth: hci0: Reading Intel version information failed (-110)
[ 6301.781300] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6302.997758] Bluetooth: hci0: setting interface failed (110)
[ 6304.864724] wlp3s0: authenticate with e8:de:27:65:86:8e
[ 6304.868640] wlp3s0: send auth to e8:de:27:65:86:8e (try 1/3)
[ 6304.877870] wlp3s0: authenticated
[ 6304.881192] wlp3s0: associate with e8:de:27:65:86:8e (try 1/3)
[ 6304.885080] wlp3s0: RX AssocResp from e8:de:27:65:86:8e (capab=0x431 status=0 aid=8)
[ 6304.886678] wlp3s0: associated
[ 6304.908008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 6344.242513] usb 1-7: USB disconnect, device number 4
[ 6353.582672] usb 1-7: new full-speed USB device number 6 using xhci_hcd
[ 6353.732211] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 6353.732219] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6353.747236] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 6353.751382] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 6353.751387] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 6353.895228] Bluetooth: hci0: Intel firmware patch completed and activated
[ 6354.304210] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 6357.756085] hid-generic 0005:099A:0500.0002: unknown main item tag 0x0
[ 6357.756191] input: Bluetooth Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:099A:0500.0002/input/input21
[ 6357.756569] hid-generic 0005:099A:0500.0002: input,hidraw0: BLUETOOTH HID v1.1b Mouse [Bluetooth Mouse] on 7c:7a:91:72:8b:1f
[ 6361.153425] usb 1-7: USB disconnect, device number 6
[ 6361.153753] Bluetooth: hci0: sending frame failed (-19)
[ 6361.158709] Bluetooth: hci0: HCI reset during shutdown failed
[ 6372.408767] usb 1-7: new full-speed USB device number 7 using xhci_hcd
[ 6372.558177] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 6372.558184] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6372.573228] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 6372.573287] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 6372.573290] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 6372.709244] Bluetooth: hci0: Intel firmware patch completed and activated
[ 6373.356218] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 6377.922733] hid-generic 0005:099A:0500.0003: unknown main item tag 0x0
[ 6377.922865] input: Bluetooth Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:099A:0500.0003/input/input22
[ 6377.923269] hid-generic 0005:099A:0500.0003: input,hidraw0: BLUETOOTH HID v1.1b Mouse [Bluetooth Mouse] on 7c:7a:91:72:8b:1f
[ 6586.570400] Bluetooth: hci0: last event is not cmd complete (0x0f)
[ 6602.322374] Bluetooth: hci0: last event is not cmd complete (0x0f)
[17009.038495] usb 1-1: USB disconnect, device number 2
[18683.137067] perf: interrupt took too long (2558 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
** Model information
sys_vendor: LENOVO
product_name: 20ARS1KG00
product_version: ThinkPad T440s
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: GJET96WW (2.46 )
board_vendor: LENOVO
board_name: 20ARS1KG00
board_version: Not Defined
** Loaded modules:
hid_generic
hidp
hid
ctr
ccm
rfcomm
cmac
bnep
snd_hda_codec_hdmi
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
media
btusb
btrtl
btbcm
btintel
bluetooth
binfmt_misc
jitterentropy_rng
arc4
drbg
ansi_cprng
ecdh_generic
fuse
iwlmvm
intel_rapl
mac80211
x86_pkg_temp_thermal
intel_powerclamp
kvm_intel
kvm
wmi_bmof
irqbypass
i915
crct10dif_pclmul
iwlwifi
crc32_pclmul
snd_hda_codec_realtek
snd_hda_codec_generic
drm_kms_helper
ghash_clmulni_intel
intel_cstate
snd_hda_intel
cfg80211
intel_uncore
snd_hda_codec
intel_rapl_perf
evdev
joydev
serio_raw
snd_hda_core
drm
snd_hwdep
sg
snd_pcm
mei_me
tpm_tis
tpm_tis_core
thinkpad_acpi
rtsx_pci_ms
memstick
mei
nvram
snd_timer
tpm
i2c_algo_bit
snd
iTCO_wdt
iTCO_vendor_support
soundcore
wmi
rfkill
ac
rng_core
battery
video
pcc_cpufreq
button
coretemp
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
crc32c_intel
rtsx_pci_sdmmc
mmc_core
ahci
libahci
aesni_intel
ehci_pci
ehci_hcd
xhci_pci
psmouse
aes_x86_64
crypto_simd
cryptd
glue_helper
libata
xhci_hcd
i2c_i801
rtsx_pci
scsi_mod
e1000e
usbcore
usb_common
lpc_ich
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09)
Subsystem: Lenovo Haswell-ULT DRAM Controller [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Haswell-ULT Integrated Graphics Controller [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09)
Subsystem: Lenovo Haswell-ULT HD Audio Controller [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f0630000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo 8 Series USB xHCI HC [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f0620000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04)
Subsystem: Lenovo 8 Series HECI [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0639000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I218-V [8086:1559] (rev 04)
Subsystem: Lenovo Ethernet Connection I218-V [17aa:2214]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f063e000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
Subsystem: Lenovo 8 Series HD Audio Controller [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0634000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 6 [8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0400000-f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo T440s [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f063d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04)
Subsystem: Lenovo 8 Series LPC Controller [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo 8 Series SATA Controller 1 [AHCI mode] [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 30a8 [size=8]
Region 1: I/O ports at 30b4 [size=4]
Region 2: I/O ports at 30a0 [size=8]
Region 3: I/O ports at 30b0 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f063c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22] (rev 04)
Subsystem: Lenovo 8 Series SMBus Controller [17aa:220c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0638000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
Subsystem: Lenovo RTS5227 PCI Express Card Reader [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2] (rev 83)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c260]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
** USB devices:
Bus 003 Device 003: ID 04f3:0224 Elan Microelectronics Corp.
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 04ca:7035 Lite-On Technology Corp.
Bus 001 Device 007: ID 8087:07dc Intel Corp.
Bus 001 Device 003: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.1-3+b1
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-9
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20180825+dfsg-1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: