--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.3.0-2-amd64: failure to initialize i915 GPU during boot
- From: Bart Vanhaute <bart.vanhaute@gmail.com>
- Date: Wed, 13 Nov 2019 21:43:58 +0100
- Message-id: <CAAAqk6DA29SQbumxyGLsQYRPjkZx2uJqrmhk-BDehLo6c56g3g@mail.gmail.com>
Package: src:linux
Version: 5.3.9-1
Severity: important
Dear Maintainer,
Since 5.3.0 version of linux-image for amd64, the kernel fails to
initialize drm, the following critical error lines are reported during
the boot:
[ 2.500131] i915 0000:00:02.0: Failed to idle engines, declaring wedged!
[ 2.531399] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized):
registered PHC clock
[ 2.548207] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged!
the graphical environment fails to load, resulting in a marginally
usable system. Booting the previous version linux-image 5.2.0 still works. This
bug report was written while running this previous version.
I have booted the broken version with an extra debug parameter drm.debug=0xf
to capture drm debug information. See included dmesg output.
regards,
Bart.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: Latitude 7490
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.11.0
board_vendor: Dell Inc.
board_name: 0KP0FT
board_version: A00
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen
Core Processor Host Bridge/DRAM Registers [8086:5914] (rev 08)
Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host
Bridge/DRAM Registers [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD
Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Dell UHD Graphics 620 [1028:081c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 133
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
[8086:1903] (rev 08)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core
Processor Thermal Subsystem [1028:081c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec340000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB
3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 132
Region 0: Memory at ec330000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:081c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ec356000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec355000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ec354000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #2 [8086:9d62] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ec353000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.3 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Serial IO I2C Controller #3 [8086:9d63] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ec352000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise
Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at ec351000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #1 [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: None
Memory behind bridge: ec200000-ec2fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #3 [8086:9d12] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: None
Memory behind bridge: ec100000-ec1fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=03, subordinate=3b, sec-latency=0
I/O behind bridge: 00002000-00004fff [size=12K]
Memory behind bridge: d4000000-ea0fffff [size=353M]
Prefetchable memory behind bridge:
00000000b0000000-00000000d1ffffff [size=544M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0
I/O behind bridge: None
Memory behind bridge: ec000000-ec0fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point LPC
Controller/eSPI Controller [8086:9d4e] (rev 21)
Subsystem: Dell Sunrise Point LPC Controller/eSPI Controller [1028:081c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP
PMC [8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ec34c000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
Audio [8086:9d71] (rev 21) (prog-if 80)
Subsystem: Dell Sunrise Point-LP HD Audio [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 127
Region 0: Memory at ec348000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ec320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
[8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:081c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec350000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet
Connection (4) I219-LM [8086:15d7] (rev 21)
Subsystem: Dell Ethernet Connection (4) I219-LM [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at ec300000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:081c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 1: Memory at ec200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 /
8275 [8086:24fd] (rev 78)
Subsystem: Intel Corporation Wireless 8265 / 8275 [8086:0050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 0: Memory at ec100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
3c:00.0 Non-Volatile memory controller [0108]: Toshiba Corporation
Device [1179:0116] (prog-if 02 [NVM Express])
Subsystem: Toshiba Corporation Device [1179:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ec000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 0c45:6717 Microdia Integrated_Webcam_HD
Bus 001 Device 004: ID 0a5c:5832 Broadcom Corp. 5880
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.3.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-3
ii linux-base 4.6
Versions of packages linux-image-5.3.0-2-amd64 recommends:
ii apparmor 2.13.3-6
ii firmware-linux-free 3.4
Versions of packages linux-image-5.3.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-4
pn linux-doc-5.3 <none>
Versions of packages linux-image-5.3.0-2-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190717-2
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[ 0.385520] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.385529] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.385529] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.552353] alg: No test for lzo-rle (lzo-rle-generic)
[ 0.552353] alg: No test for lzo-rle (lzo-rle-scomp)
[ 0.552353] ACPI: Added _OSI(Module Device)
[ 0.552353] ACPI: Added _OSI(Processor Device)
[ 0.552353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.552353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.552353] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.552353] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.552353] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.605275] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.672495] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.681524] ACPI: Dynamic OEM Table Load:
[ 0.681534] ACPI: SSDT 0xFFFF931C19C50800 0005EE (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.683217] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.684438] ACPI: Dynamic OEM Table Load:
[ 0.684446] ACPI: SSDT 0xFFFF931C19C98C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.686099] ACPI: Dynamic OEM Table Load:
[ 0.686105] ACPI: SSDT 0xFFFF931C19DCE840 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.687582] ACPI: Dynamic OEM Table Load:
[ 0.687590] ACPI: SSDT 0xFFFF931C19C56800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.689470] ACPI: Dynamic OEM Table Load:
[ 0.689483] ACPI: SSDT 0xFFFF931C1A0DA000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.691718] ACPI: Dynamic OEM Table Load:
[ 0.691725] ACPI: SSDT 0xFFFF931C19C98800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.693365] ACPI: Dynamic OEM Table Load:
[ 0.693372] ACPI: SSDT 0xFFFF931C19C9E000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.697917] ACPI: EC: EC started
[ 0.697920] ACPI: EC: interrupt blocked
[ 0.708697] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.708701] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.708704] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.708706] ACPI: Interpreter enabled
[ 0.708767] ACPI: (supports S0 S3 S4 S5)
[ 0.708769] ACPI: Using IOAPIC for interrupt routing
[ 0.708818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.709569] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.729358] ACPI: Power Resource [WRST] (on)
[ 0.757298] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.757306] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.758871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.760267] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.760270] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.761113] PCI host bridge to bus 0000:00
[ 0.761117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.761120] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.761123] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.761126] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[ 0.761129] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.761132] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.761144] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 0.761289] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 0.761305] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.761313] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.761320] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.761339] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.761486] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.761503] pci 0000:00:04.0: reg 0x10: [mem 0xec340000-0xec347fff 64bit]
[ 0.761738] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.761765] pci 0000:00:14.0: reg 0x10: [mem 0xec330000-0xec33ffff 64bit]
[ 0.761841] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.762072] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.762098] pci 0000:00:14.2: reg 0x10: [mem 0xec356000-0xec356fff 64bit]
[ 0.762361] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.762614] pci 0000:00:15.0: reg 0x10: [mem 0xec355000-0xec355fff 64bit]
[ 0.763653] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.763919] pci 0000:00:15.1: reg 0x10: [mem 0xec354000-0xec354fff 64bit]
[ 0.764959] pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000
[ 0.765225] pci 0000:00:15.2: reg 0x10: [mem 0xec353000-0xec353fff 64bit]
[ 0.766291] pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000
[ 0.766557] pci 0000:00:15.3: reg 0x10: [mem 0xec352000-0xec352fff 64bit]
[ 0.767552] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.767582] pci 0000:00:16.0: reg 0x10: [mem 0xec351000-0xec351fff 64bit]
[ 0.767656] pci 0000:00:16.0: PME# supported from D3hot
[ 0.767858] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.767955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.767974] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.768163] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.768258] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.768275] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 0.768456] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.768539] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.768555] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.768735] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.768820] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.768837] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.769039] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.769263] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.769281] pci 0000:00:1f.2: reg 0x10: [mem 0xec34c000-0xec34ffff]
[ 0.769482] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 0.769514] pci 0000:00:1f.3: reg 0x10: [mem 0xec348000-0xec34bfff 64bit]
[ 0.769551] pci 0000:00:1f.3: reg 0x20: [mem 0xec320000-0xec32ffff 64bit]
[ 0.769607] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.769883] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.769947] pci 0000:00:1f.4: reg 0x10: [mem 0xec350000-0xec3500ff 64bit]
[ 0.770020] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.770239] pci 0000:00:1f.6: [8086:15d7] type 00 class 0x020000
[ 0.770267] pci 0000:00:1f.6: reg 0x10: [mem 0xec300000-0xec31ffff]
[ 0.770370] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.770915] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.770955] pci 0000:01:00.0: reg 0x14: [mem 0xec200000-0xec200fff]
[ 0.771077] pci 0000:01:00.0: supports D1 D2
[ 0.771079] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.771417] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.771422] pci 0000:00:1c.0: bridge window [mem 0xec200000-0xec2fffff]
[ 0.771884] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[ 0.771985] pci 0000:02:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit]
[ 0.772312] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.773057] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.773064] pci 0000:00:1c.2: bridge window [mem 0xec100000-0xec1fffff]
[ 0.773188] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400
[ 0.773255] pci 0000:03:00.0: enabling Extended Tags
[ 0.773340] pci 0000:03:00.0: supports D1 D2
[ 0.773343] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773464] pci 0000:00:1c.4: PCI bridge to [bus 03-3b]
[ 0.773470] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.773475] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.773556] pci 0000:04:00.0: [8086:15da] type 01 class 0x060400
[ 0.773627] pci 0000:04:00.0: enabling Extended Tags
[ 0.773720] pci 0000:04:00.0: supports D1 D2
[ 0.773723] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773824] pci 0000:04:01.0: [8086:15da] type 01 class 0x060400
[ 0.773892] pci 0000:04:01.0: enabling Extended Tags
[ 0.773984] pci 0000:04:01.0: supports D1 D2
[ 0.773986] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.774087] pci 0000:04:02.0: [8086:15da] type 01 class 0x060400
[ 0.774158] pci 0000:04:02.0: enabling Extended Tags
[ 0.774250] pci 0000:04:02.0: supports D1 D2
[ 0.774252] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.774374] pci 0000:03:00.0: PCI bridge to [bus 04-3b]
[ 0.774383] pci 0000:03:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.774390] pci 0000:03:00.0: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.774436] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.774446] pci 0000:04:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.774496] pci 0000:04:01.0: PCI bridge to [bus 06-3a]
[ 0.774506] pci 0000:04:01.0: bridge window [mem 0xd4000000-0xe9efffff]
[ 0.774513] pci 0000:04:01.0: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.774568] pci 0000:04:02.0: PCI bridge to [bus 3b]
[ 0.774578] pci 0000:04:02.0: bridge window [mem 0xe9f00000-0xe9ffffff]
[ 0.774715] pci 0000:3c:00.0: [1179:0116] type 00 class 0x010802
[ 0.774747] pci 0000:3c:00.0: reg 0x10: [mem 0xec000000-0xec003fff 64bit]
[ 0.774976] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.774982] pci 0000:00:1d.0: bridge window [mem 0xec000000-0xec0fffff]
[ 0.780671] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.780727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.780780] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.780831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.780883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.780934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.780987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.781038] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.787702] ACPI: EC: interrupt unblocked
[ 0.787713] ACPI: EC: event unblocked
[ 0.787737] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.787741] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.788489] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.788492] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.788500] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.788502] vgaarb: loaded
[ 0.788570] EDAC MC: Ver: 3.0.0
[ 0.790173] Registered efivars operations
[ 0.790173] PCI: Using ACPI for IRQ routing
[ 0.804630] PCI: pci_cache_line_size set to 64 bytes
[ 0.805923] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.805924] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.805925] e820: reserve RAM buffer [mem 0x69061000-0x6bffffff]
[ 0.805926] e820: reserve RAM buffer [mem 0x795e8000-0x7bffffff]
[ 0.805927] e820: reserve RAM buffer [mem 0x7b200000-0x7bffffff]
[ 0.805928] e820: reserve RAM buffer [mem 0x87e800000-0x87fffffff]
[ 0.806788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.806794] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.808082] clocksource: Switched to clocksource tsc-early
[ 0.819492] VFS: Disk quotas dquot_6.6.0
[ 0.819511] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.819641] AppArmor: AppArmor Filesystem Enabled
[ 0.819656] pnp: PnP ACPI init
[ 0.819962] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.819966] system 00:00: [io 0xffff] has been reserved
[ 0.819968] system 00:00: [io 0xffff] has been reserved
[ 0.819971] system 00:00: [io 0xffff] has been reserved
[ 0.819973] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.819975] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.819981] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820116] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.820163] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.820168] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.820254] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.820517] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.820521] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.820524] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.820526] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.820529] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.820532] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.820535] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.820538] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.820540] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.820543] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.820548] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820600] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.820603] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.820606] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.820609] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.820611] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.820614] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.820616] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.820621] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820997] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.821002] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.822399] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.822402] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.822405] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.822407] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.822412] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.831263] pnp: PnP ACPI: found 8 devices
[ 0.832547] thermal_sys: Registered thermal governor 'fair_share'
[ 0.832547] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.832550] thermal_sys: Registered thermal governor 'step_wise'
[ 0.832552] thermal_sys: Registered thermal governor 'user_space'
[ 0.837062] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.837099] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-3a] add_size 1000
[ 0.837104] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 3b] add_size 1000
[ 0.837107] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b] add_size 200000 add_align 100000
[ 0.837111] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-3b] add_size 2000
[ 0.837115] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-3b] add_size 3000
[ 0.837123] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x4fff]
[ 0.837126] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.837133] pci 0000:00:1c.0: bridge window [mem 0xec200000-0xec2fffff]
[ 0.837142] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.837147] pci 0000:00:1c.2: bridge window [mem 0xec100000-0xec1fffff]
[ 0.837155] pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x3fff]
[ 0.837161] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.837164] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.837167] pci 0000:04:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.837170] pci 0000:04:02.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.837173] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.837176] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.837179] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.837185] pci 0000:04:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.837196] pci 0000:04:01.0: PCI bridge to [bus 06-3a]
[ 0.837199] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]
[ 0.837206] pci 0000:04:01.0: bridge window [mem 0xd4000000-0xe9efffff]
[ 0.837211] pci 0000:04:01.0: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837219] pci 0000:04:02.0: PCI bridge to [bus 3b]
[ 0.837222] pci 0000:04:02.0: bridge window [io 0x3000-0x3fff]
[ 0.837228] pci 0000:04:02.0: bridge window [mem 0xe9f00000-0xe9ffffff]
[ 0.837238] pci 0000:03:00.0: PCI bridge to [bus 04-3b]
[ 0.837242] pci 0000:03:00.0: bridge window [io 0x2000-0x3fff]
[ 0.837248] pci 0000:03:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.837253] pci 0000:03:00.0: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837260] pci 0000:00:1c.4: PCI bridge to [bus 03-3b]
[ 0.837263] pci 0000:00:1c.4: bridge window [io 0x2000-0x4fff]
[ 0.837268] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.837272] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837278] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.837283] pci 0000:00:1d.0: bridge window [mem 0xec000000-0xec0fffff]
[ 0.837291] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.837294] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.837296] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.837299] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window]
[ 0.837301] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.837304] pci_bus 0000:01: resource 1 [mem 0xec200000-0xec2fffff]
[ 0.837306] pci_bus 0000:02: resource 1 [mem 0xec100000-0xec1fffff]
[ 0.837308] pci_bus 0000:03: resource 0 [io 0x2000-0x4fff]
[ 0.837311] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.837313] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837316] pci_bus 0000:04: resource 0 [io 0x2000-0x3fff]
[ 0.837318] pci_bus 0000:04: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.837320] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837323] pci_bus 0000:05: resource 1 [mem 0xea000000-0xea0fffff]
[ 0.837325] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.837327] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xe9efffff]
[ 0.837330] pci_bus 0000:06: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref]
[ 0.837332] pci_bus 0000:3b: resource 0 [io 0x3000-0x3fff]
[ 0.837334] pci_bus 0000:3b: resource 1 [mem 0xe9f00000-0xe9ffffff]
[ 0.837337] pci_bus 0000:3c: resource 1 [mem 0xec000000-0xec0fffff]
[ 0.837499] NET: Registered protocol family 2
[ 0.837637] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.837696] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.837984] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.838114] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.838156] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.838226] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.838335] NET: Registered protocol family 1
[ 0.838343] NET: Registered protocol family 44
[ 0.838355] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.839987] PCI: CLS 128 bytes, default 64
[ 0.840043] Trying to unpack rootfs image as initramfs...
[ 1.853340] Freeing initrd memory: 57316K
[ 1.853479] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.0
[ 1.853484] DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:15.1
[ 1.853488] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.2
[ 1.853492] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.3
[ 1.853508] DMAR: No ATSR found
[ 1.853558] DMAR: dmar0: Using Queued invalidation
[ 1.853563] DMAR: dmar1: Using Queued invalidation
[ 1.853962] pci 0000:00:00.0: Adding to iommu group 0
[ 1.859110] pci 0000:00:02.0: Adding to iommu group 1
[ 1.859686] pci 0000:00:02.0: Using iommu direct mapping
[ 1.859728] pci 0000:00:04.0: Adding to iommu group 2
[ 1.859825] pci 0000:00:14.0: Adding to iommu group 3
[ 1.859840] pci 0000:00:14.2: Adding to iommu group 3
[ 1.859912] pci 0000:00:15.0: Adding to iommu group 4
[ 1.859925] pci 0000:00:15.1: Adding to iommu group 4
[ 1.859937] pci 0000:00:15.2: Adding to iommu group 4
[ 1.859950] pci 0000:00:15.3: Adding to iommu group 4
[ 1.860013] pci 0000:00:16.0: Adding to iommu group 5
[ 1.860098] pci 0000:00:1c.0: Adding to iommu group 6
[ 1.860170] pci 0000:00:1c.2: Adding to iommu group 7
[ 1.860227] pci 0000:00:1c.4: Adding to iommu group 8
[ 1.860292] pci 0000:00:1d.0: Adding to iommu group 9
[ 1.860375] pci 0000:00:1f.0: Adding to iommu group 10
[ 1.860390] pci 0000:00:1f.2: Adding to iommu group 10
[ 1.860404] pci 0000:00:1f.3: Adding to iommu group 10
[ 1.860418] pci 0000:00:1f.4: Adding to iommu group 10
[ 1.860431] pci 0000:00:1f.6: Adding to iommu group 10
[ 1.860505] pci 0000:01:00.0: Adding to iommu group 11
[ 1.860578] pci 0000:02:00.0: Adding to iommu group 12
[ 1.860635] pci 0000:03:00.0: Adding to iommu group 13
[ 1.860701] pci 0000:04:00.0: Adding to iommu group 14
[ 1.860759] pci 0000:04:01.0: Adding to iommu group 15
[ 1.860825] pci 0000:04:02.0: Adding to iommu group 16
[ 1.860884] pci 0000:3c:00.0: Adding to iommu group 17
[ 1.861017] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.863484] Initialise system trusted keyrings
[ 1.863497] Key type blacklist registered
[ 1.863544] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 1.864890] zbud: loaded
[ 1.865213] Platform Keyring initialized
[ 1.865217] Key type asymmetric registered
[ 1.865219] Asymmetric key parser 'x509' registered
[ 1.865227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.865271] io scheduler mq-deadline registered
[ 1.866254] pcieport 0000:03:00.0: enabling device (0006 -> 0007)
[ 1.866577] pcieport 0000:04:01.0: enabling device (0006 -> 0007)
[ 1.866766] pcieport 0000:04:02.0: enabling device (0006 -> 0007)
[ 1.866950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.866969] efifb: probing for efifb
[ 1.866983] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[ 1.866986] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.866987] efifb: scrolling: redraw
[ 1.866990] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.871589] Console: switching to colour frame buffer device 240x67
[ 1.876115] fb0: EFI VGA frame buffer device
[ 1.876140] intel_idle: MWAIT substates: 0x11142120
[ 1.876141] intel_idle: v0.4.1 model 0x8E
[ 1.876605] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.879810] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.879835] ACPI: Thermal Zone [THM] (25 C)
[ 1.880023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.880842] Linux agpgart interface v0.103
[ 1.880925] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.880951] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.881537] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.881564] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.882136] i8042: Warning: Keylock active
[ 1.882405] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.882542] mousedev: PS/2 mouse device common for all mice
[ 1.882610] rtc_cmos 00:01: RTC can wake from S4
[ 1.883200] rtc_cmos 00:01: registered as rtc0
[ 1.883231] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.883284] intel_pstate: Intel P-state driver initializing
[ 1.884012] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.884401] intel_pstate: HWP enabled
[ 1.884774] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.885280] NET: Registered protocol family 10
[ 1.894522] Segment Routing with IPv6
[ 1.894548] mip6: Mobile IPv6
[ 1.894557] NET: Registered protocol family 17
[ 1.894675] mpls_gso: MPLS GSO support
[ 1.895363] microcode: sig=0x806ea, pf=0x80, revision=0xb4
[ 1.895572] microcode: Microcode Update Driver: v2.2.
[ 1.895578] sched_clock: Marking stable (1894339153, 950556)->(1964041683, -68751974)
[ 1.895910] registered taskstats version 1
[ 1.895922] Loading compiled-in X.509 certificates
[ 1.917655] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.917682] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.917707] zswap: loaded using pool lzo/zbud
[ 1.917896] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.918293] integrity: Loading X.509 certificate: UEFI:db
[ 1.918317] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 1.918349] integrity: Loading X.509 certificate: UEFI:db
[ 1.918374] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.918394] integrity: Loading X.509 certificate: UEFI:db
[ 1.918416] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.919669] rtc_cmos 00:01: setting system clock to 2019-11-12T19:33:16 UTC (1573587196)
[ 1.920416] Freeing unused kernel image memory: 1660K
[ 1.968384] Write protecting the kernel read-only data: 16384k
[ 1.970772] Freeing unused kernel image memory: 2036K
[ 1.972703] Freeing unused kernel image memory: 536K
[ 1.979917] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.980635] x86/mm: Checking user space page tables
[ 1.986656] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.987338] Run /init as init process
[ 2.073598] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.074557] ACPI: Lid Switch [LID0]
[ 2.075451] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.076300] ACPI: Power Button [PBTN]
[ 2.077232] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.078535] ACPI: Sleep Button [SBTN]
[ 2.079665] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.080899] ACPI: Power Button [PWRF]
[ 2.081305] ACPI Warning: SystemMemory range 0x00000000FE028000-0x00000000FE0281FF conflicts with OpRegion 0x00000000FE028000-0x00000000FE028207 (\_SB.PCI0.GEXP.BAR0) (20190703/utaddress-204)
[ 2.083105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.084487] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.087419] intel-lpss: probe of INT3446:00 failed with error -16
[ 2.089378] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.092340] pps_core: LinuxPPS API ver. 1 registered
[ 2.093180] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 2.093181] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.093645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.096871] ACPI: bus type USB registered
[ 2.096885] usbcore: registered new interface driver usbfs
[ 2.096890] usbcore: registered new interface driver hub
[ 2.096909] usbcore: registered new device driver usb
[ 2.100745] cryptd: max_cpu_qlen set to 1000
[ 2.103232] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.104436] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.105448] nvme nvme0: pci function 0000:3c:00.0
[ 2.107212] [drm:drm_core_init [drm]] Initialized
[ 2.107517] PTP clock support registered
[ 2.107946] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.116294] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.117048] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.121490] AVX2 version of gcm_enc/dec engaged.
[ 2.122785] AES CTR mode by8 optimization enabled
[ 2.125127] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.151999] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
[ 2.152026] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.153528] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.155340] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 2.156406] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 2.157538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 2.158564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.159798] usb usb1: Product: xHCI Host Controller
[ 2.161006] usb usb1: Manufacturer: Linux 5.3.0-2-amd64 xhci-hcd
[ 2.162027] usb usb1: SerialNumber: 0000:00:14.0
[ 2.169004] hub 1-0:1.0: USB hub found
[ 2.170228] hub 1-0:1.0: 12 ports detected
[ 2.171914] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
[ 2.172973] [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
[ 2.172995] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
[ 2.173024] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
[ 2.173043] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
[ 2.173067] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
[ 2.173276] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 2.174627] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
[ 2.174649] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
[ 2.174669] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M
[ 2.174671] [drm] VT-d active for gfx access
[ 2.175424] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[ 2.175425] fb0: switching to inteldrmfb from EFI VGA
[ 2.176244] Console: switching to colour dummy device 80x25
[ 2.176269] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.176320] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7f700047
[ 2.176347] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
[ 2.176648] [drm:intel_gt_init_workarounds [i915]] Initialized 5 GT workarounds
[ 2.176694] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7a347018
[ 2.176720] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
[ 2.176739] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
[ 2.176759] [drm:intel_opregion_setup [i915]] SWSCI supported
[ 2.228152] [drm:swsci [i915]] SWSCI request timed out
[ 2.228174] [drm:swsci [i915]] SWSCI request already in progress
[ 2.228194] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
[ 2.228212] [drm:intel_opregion_setup [i915]] ASLE supported
[ 2.228231] [drm:intel_opregion_setup [i915]] ASLE extension supported
[ 2.228249] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[ 2.228265] [drm:i915_driver_load [i915]] DRAM type: DDR4
[ 2.228282] [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 GB, width: X8, ranks: 2, 16Gb DIMMs: no
[ 2.228297] [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no
[ 2.228311] [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no
[ 2.228325] [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 GB, width: X8, ranks: 2, 16Gb DIMMs: no
[ 2.228338] [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no
[ 2.228351] [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no
[ 2.228364] [drm:i915_driver_load [i915]] Memory configuration is symmetric? yes
[ 2.228377] [drm:i915_driver_load [i915]] DRAM bandwidth: 38400000 kBps, channels: 2
[ 2.228389] [drm:i915_driver_load [i915]] DRAM ranks: 2, 16Gb DIMMs: no
[ 2.228390] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.228392] [drm] Driver supports precise vblank timestamp query.
[ 2.228414] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
[ 2.228435] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212
[ 2.228455] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 2.228475] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
[ 2.228495] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-22)
[ 2.228514] [drm:intel_bios_init [i915]] Panel type: 14 (VBT)
[ 2.228533] [drm:intel_bios_init [i915]] DRRS supported mode is static
[ 2.228552] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
[ 2.228564] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa
[ 2.228582] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
[ 2.228601] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
[ 2.228618] [drm:intel_bios_init [i915]] DRRS State Enabled:0
[ 2.228638] [drm:intel_bios_init [i915]] Skipping SDVO device mapping
[ 2.228657] [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0
[ 2.228674] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
[ 2.228692] [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0
[ 2.228709] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 0
[ 2.228727] [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0
[ 2.228744] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
[ 2.274154] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
[ 2.274185] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz
[ 2.274207] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[ 2.274233] [drm:intel_power_well_enable [i915]] enabling power well 1
[ 2.274259] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
[ 2.274282] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 2.274302] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
[ 2.274322] [drm:intel_cdclk_init [i915]] Max dotclock rate: 675000 kHz
[ 2.274354] [drm:intel_power_well_enable [i915]] enabling always-on
[ 2.274374] [drm:intel_power_well_enable [i915]] enabling DC off
[ 2.274393] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[ 2.274414] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 2.274417] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.274441] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[ 2.274459] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
[ 2.274478] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
[ 2.274497] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
[ 2.274524] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
[ 2.274533] [drm:drm_irq_install [drm]] irq=133
[ 2.274556] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 2.275017] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.275777] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.275782] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.275785] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.275849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 2.275851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.275852] usb usb2: Product: xHCI Host Controller
[ 2.275853] usb usb2: Manufacturer: Linux 5.3.0-2-amd64 xhci-hcd
[ 2.275854] usb usb2: SerialNumber: 0000:00:14.0
[ 2.275945] hub 2-0:1.0: USB hub found
[ 2.275968] hub 2-0:1.0: 6 ports detected
[ 2.276323] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
[ 2.276568] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
[ 2.276584] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
[ 2.276599] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
[ 2.276613] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
[ 2.276627] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
[ 2.276640] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
[ 2.276653] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
[ 2.276666] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
[ 2.276687] [drm:intel_modeset_init [i915]] 3 display pipes available.
[ 2.276744] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 2.277066] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
[ 2.277088] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
[ 2.277140] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
[ 2.277160] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
[ 2.277179] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
[ 2.277198] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
[ 2.277261] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[ 2.277294] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[ 2.277356] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
[ 2.277769] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 c0 02 00 00 00 0f 0b 00
[ 2.278143] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID a\006OB\024\001 HW-rev 10.0 SW-rev 1.24 quirks 0x0000
[ 2.278462] [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 fb c7
[ 2.278775] [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
[ 2.279681] usb: port power management may be unreliable
[ 2.282579] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 2.282698] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 2.282707] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 2.282716] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 2.282735] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 2.282743] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 2.282776] [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:86:eDP-1] using preferred mode from EDID:
[ 2.282787] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 2.282816] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
[ 2.282876] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 6000/7500
[ 2.282917] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)
[ 2.282946] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
[ 2.282981] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
[ 2.283009] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
[ 2.283043] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
[ 2.283068] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
[ 2.283101] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
[ 2.283126] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
[ 2.283170] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:48:pipe A] hw state readout: enabled
[ 2.283196] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:66:pipe B] hw state readout: disabled
[ 2.283216] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe C] hw state readout: disabled
[ 2.283235] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A
[ 2.283255] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:38:plane 2A] hw state readout: disabled, pipe A
[ 2.283274] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:45:cursor A] hw state readout: disabled, pipe A
[ 2.283292] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 1B] hw state readout: disabled, pipe B
[ 2.283310] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:56:plane 2B] hw state readout: disabled, pipe B
[ 2.283328] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:cursor B] hw state readout: disabled, pipe B
[ 2.283346] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 1C] hw state readout: disabled, pipe C
[ 2.283364] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 2C] hw state readout: disabled, pipe C
[ 2.283383] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:cursor C] hw state readout: disabled, pipe C
[ 2.283401] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
[ 2.283419] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 2.283437] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 2.283454] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
[ 2.283476] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:85:DDI A] hw state readout: enabled, pipe A
[ 2.283494] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:91:DDI B] hw state readout: disabled, pipe A
[ 2.283511] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:93:DP-MST A] hw state readout: disabled, pipe A
[ 2.283529] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP-MST B] hw state readout: disabled, pipe B
[ 2.283546] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:95:DP-MST C] hw state readout: disabled, pipe C
[ 2.283564] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C] hw state readout: disabled, pipe A
[ 2.283581] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST A] hw state readout: disabled, pipe A
[ 2.283598] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DP-MST B] hw state readout: disabled, pipe B
[ 2.283615] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST C] hw state readout: disabled, pipe C
[ 2.283634] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:86:eDP-1] hw state readout: enabled
[ 2.283652] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:92:DP-1] hw state readout: disabled
[ 2.283670] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:99:HDMI-A-1] hw state readout: disabled
[ 2.283687] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:DP-2] hw state readout: disabled
[ 2.283705] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:HDMI-A-2] hw state readout: disabled
[ 2.283716] [drm:drm_calc_timestamping_constants [drm]] crtc 48: hwmode: htotal 2120, vtotal 1100, vdisplay 1080
[ 2.283734] [drm:intel_modeset_setup_hw_state [i915]] crtc 48: clock 139999 kHz framedur 16657261 linedur 15142
[ 2.283752] [drm:intel_modeset_setup_hw_state [i915]] pipe A data rate 559996 num active planes 1
[ 2.283769] [drm:intel_modeset_setup_hw_state [i915]] pipe B data rate 0 num active planes 0
[ 2.283787] [drm:intel_modeset_setup_hw_state [i915]] pipe C data rate 0 num active planes 0
[ 2.283810] [drm:intel_dump_pipe_config [i915]] [CRTC:48:pipe A] enable: yes [setup_hw_state]
[ 2.283829] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB
[ 2.283848] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
[ 2.283866] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4893354, gmch_n: 8388608, link_m: 271853, link_n: 524288, tu: 64
[ 2.283885] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
[ 2.283903] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 2.283909] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 139999 1920 1968 2000 2120 1080 1083 1089 1100 0x40 0x9
[ 2.283928] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 2.283934] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 139999 1920 1968 2000 2120 1080 1083 1089 1100 0x40 0x9
[ 2.283953] [drm:intel_dump_pipe_config [i915]] crtc timings: 139999 1920 1968 2000 2120 1080 1083 1089 1100, type: 0x40 flags: 0x9
[ 2.283971] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 139999
[ 2.283989] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
[ 2.284007] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled, force thru: no
[ 2.284024] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 2.284043] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[ 2.284061] [drm:intel_dump_pipe_config [i915]] [CRTC:66:pipe B] enable: no [setup_hw_state]
[ 2.284082] [drm:intel_dump_pipe_config [i915]] [CRTC:84:pipe C] enable: no [setup_hw_state]
[ 2.284090] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (2)
[ 2.284235] [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
[ 2.284255] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000
[ 2.284281] [drm:intel_alloc_initial_plane_obj.isra.0 [i915]] initial plane fb obj 000000007f562307
[ 2.284295] [drm:drm_mode_object_get [drm]] OBJ ID: 113 (1)
[ 2.284301] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (1)
[ 2.284327] [drm:intel_atomic_setup_scalers [i915]] Attached scaler id 0.0 to CRTC:48
[ 2.284350] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860
[ 2.284366] [drm:skl_compute_wm [i915]] [PLANE:45:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32
[ 2.284382] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm
[ 2.284397] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 2, 3, 3, 5, 6, 6, 7, 0
[ 2.284412] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 7, 7, 7, 7, 7, 7, 7, 7 -> 8, 28, 37, 42, 76, 91, 98, 114, 0
[ 2.284427] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 29, 38, 43, 77, 92, 99, 115, 0
[ 2.284441] [drm:skl_compute_wm [i915]] [PLANE:38:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284454] [drm:skl_compute_wm [i915]] [PLANE:38:plane 2A] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284468] [drm:skl_compute_wm [i915]] [PLANE:38:plane 2A] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284481] [drm:skl_compute_wm [i915]] [PLANE:38:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284495] [drm:skl_compute_wm [i915]] [PLANE:45:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284509] [drm:skl_compute_wm [i915]] [PLANE:45:cursor A] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284522] [drm:skl_compute_wm [i915]] [PLANE:45:cursor A] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284534] [drm:skl_compute_wm [i915]] [PLANE:45:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284547] [drm:skl_compute_wm [i915]] [PLANE:49:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284560] [drm:skl_compute_wm [i915]] [PLANE:49:plane 1B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284573] [drm:skl_compute_wm [i915]] [PLANE:49:plane 1B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284586] [drm:skl_compute_wm [i915]] [PLANE:49:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284598] [drm:skl_compute_wm [i915]] [PLANE:56:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284611] [drm:skl_compute_wm [i915]] [PLANE:56:plane 2B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284624] [drm:skl_compute_wm [i915]] [PLANE:56:plane 2B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284636] [drm:skl_compute_wm [i915]] [PLANE:56:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284649] [drm:skl_compute_wm [i915]] [PLANE:63:cursor B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284662] [drm:skl_compute_wm [i915]] [PLANE:63:cursor B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284675] [drm:skl_compute_wm [i915]] [PLANE:63:cursor B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284687] [drm:skl_compute_wm [i915]] [PLANE:63:cursor B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284700] [drm:skl_compute_wm [i915]] [PLANE:67:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284713] [drm:skl_compute_wm [i915]] [PLANE:67:plane 1C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284726] [drm:skl_compute_wm [i915]] [PLANE:67:plane 1C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284738] [drm:skl_compute_wm [i915]] [PLANE:67:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284750] [drm:skl_compute_wm [i915]] [PLANE:74:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284763] [drm:skl_compute_wm [i915]] [PLANE:74:plane 2C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284776] [drm:skl_compute_wm [i915]] [PLANE:74:plane 2C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284788] [drm:skl_compute_wm [i915]] [PLANE:74:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284801] [drm:skl_compute_wm [i915]] [PLANE:81:cursor C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
[ 2.284813] [drm:skl_compute_wm [i915]] [PLANE:81:cursor C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284826] [drm:skl_compute_wm [i915]] [PLANE:81:cursor C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284838] [drm:skl_compute_wm [i915]] [PLANE:81:cursor C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0
[ 2.284868] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[ 2.284889] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[ 2.284898] [drm:drm_vblank_enable [drm]] enabling vblank on crtc 0, ret: 0
[ 2.294498] [drm:drm_handle_vblank [drm]] vblank event on 2, current 2
[ 2.294948] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7ea000, 100000000]
[ 2.296397] [drm:intel_engine_init_ctx_wa [i915]] Initialized 14 context workarounds
[ 2.296424] [drm:i915_gem_contexts_init [i915]] logical context support initialized
[ 2.296484] [drm:intel_engine_init_workarounds [i915]] Initialized 5 rcs0 workarounds
[ 2.296502] [drm:intel_engine_init_whitelist [i915]] Initialized 5 whitelist workarounds
[ 2.311199] [drm:vblank_disable_fn [drm]] disabling vblank on crtc 0
[ 2.318270] i2c_hid i2c-DELL081C:00: i2c-DELL081C:00 supply vdd not found, using dummy regulator
[ 2.318280] i2c_hid i2c-DELL081C:00: i2c-DELL081C:00 supply vddl not found, using dummy regulator
[ 2.326387] nvme nvme0: 8/0/0 default/read/poll queues
[ 2.328448] nvme0n1: p1 p2 p3
[ 2.408812] input: DELL081C:00 044E:121F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input5
[ 2.408858] input: DELL081C:00 044E:121F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input6
[ 2.408890] input: DELL081C:00 044E:121F as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input7
[ 2.408911] hid-generic 0018:044E:121F.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL081C:00 044E:121F] on i2c-DELL081C:00
[ 2.500131] i915 0000:00:02.0: Failed to idle engines, declaring wedged!
[ 2.500419] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 113 (2)
[ 2.500449] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (2)
[ 2.531399] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 2.548207] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged!
[ 2.548216] i915 0000:00:02.0: Please file a bug at https://bugs.freedesktop.org/enter_bug.cgi?product=DRI against DRM/Intel providing the dmesg log by booting with drm.debug=0xf
[ 2.564314] [drm:intel_fbdev_init [i915]] found possible fb from plane A
[ 2.564392] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
[ 2.564466] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
[ 2.564535] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
[ 2.564605] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400
[ 2.564671] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400)
[ 2.564736] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
[ 2.564801] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
[ 2.564830] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (1)
[ 2.564899] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
[ 2.564980] [drm:i915_gem_open [i915]]
[ 2.565903] [drm:drm_minor_register [drm]]
[ 2.566065] [drm:drm_minor_register [drm]] new minor registered 128
[ 2.566081] [drm:drm_minor_register [drm]]
[ 2.566211] [drm:drm_minor_register [drm]] new minor registered 0
[ 2.566296] [drm:drm_sysfs_connector_add [drm]] adding "eDP-1" to sysfs
[ 2.566314] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.566440] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
[ 2.566525] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
[ 2.566639] [drm:drm_dp_aux_register_devnode [drm_kms_helper]] drm_dp_aux_dev: aux [DPDDC-A] registered as minor 0
[ 2.566721] [drm:drm_sysfs_connector_add [drm]] adding "DP-1" to sysfs
[ 2.566738] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.566837] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
[ 2.566957] [drm:drm_dp_aux_register_devnode [drm_kms_helper]] drm_dp_aux_dev: aux [DPDDC-B] registered as minor 1
[ 2.567031] [drm:drm_sysfs_connector_add [drm]] adding "HDMI-A-1" to sysfs
[ 2.567049] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.567107] [drm:drm_sysfs_connector_add [drm]] adding "DP-2" to sysfs
[ 2.567123] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.567215] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
[ 2.567340] [drm:drm_dp_aux_register_devnode [drm_kms_helper]] drm_dp_aux_dev: aux [DPDDC-C] registered as minor 2
[ 2.567415] [drm:drm_sysfs_connector_add [drm]] adding "HDMI-A-2" to sysfs
[ 2.567432] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.567451] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 2.567660] [drm:intel_opregion_resume [i915]] 5 outputs detected
[ 2.570567] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.578981] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.579185] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
[ 2.579221] [drm:drm_client_modeset_probe [drm]]
[ 2.579259] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (3)
[ 2.579341] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
[ 2.579414] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
[ 2.579448] [drm:drm_mode_object_get [drm]] OBJ ID: 92 (2)
[ 2.579483] [drm:drm_mode_object_get [drm]] OBJ ID: 99 (2)
[ 2.579550] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 2.579588] [drm:drm_mode_object_get [drm]] OBJ ID: 105 (2)
[ 2.579592] i915 device info: pciid=0x5917 rev=0x07 platform=KABYLAKE (subplatform=0x0) gen=9
[ 2.579595] i915 device info: is_mobile: no
[ 2.579597] i915 device info: is_lp: no
[ 2.579627] [drm:drm_mode_object_get [drm]] OBJ ID: 110 (2)
[ 2.579628] i915 device info: require_force_probe: no
[ 2.579630] i915 device info: has_64bit_reloc: yes
[ 2.579647] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1]
[ 2.579649] i915 device info: gpu_reset_clobbers_display: no
[ 2.579651] i915 device info: has_reset_engine: yes
[ 2.579775] [drm:intel_dp_detect [i915]] [CONNECTOR:86:eDP-1]
[ 2.579777] i915 device info: has_fpga_dbg: yes
[ 2.579779] i915 device info: has_guc: yes
[ 2.579780] i915 device info: has_l3_dpf: no
[ 2.579892] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 2.579894] i915 device info: has_llc: yes
[ 2.579991] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[ 2.579993] i915 device info: has_logical_ring_contexts: yes
[ 2.580090] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[ 2.580105] i915 device info: has_logical_ring_elsq: no
[ 2.580107] i915 device info: has_logical_ring_preemption: yes
[ 2.580108] i915 device info: has_pooled_eu: no
[ 2.580109] i915 device info: has_rc6: yes
[ 2.580111] i915 device info: has_rc6p: no
[ 2.580112] i915 device info: has_rps: yes
[ 2.580113] i915 device info: has_runtime_pm: yes
[ 2.580114] i915 device info: has_snoop: no
[ 2.580116] i915 device info: has_coherent_ggtt: yes
[ 2.580117] i915 device info: unfenced_needs_alignment: no
[ 2.580118] i915 device info: hws_needs_physical: no
[ 2.580120] i915 device info: cursor_needs_physical: no
[ 2.580121] i915 device info: has_csr: yes
[ 2.580123] i915 device info: has_ddi: yes
[ 2.580125] i915 device info: has_dp_mst: yes
[ 2.580127] i915 device info: has_fbc: yes
[ 2.580129] i915 device info: has_gmch: no
[ 2.580131] i915 device info: has_hotplug: yes
[ 2.580132] i915 device info: has_ipc: yes
[ 2.580134] i915 device info: has_overlay: no
[ 2.580136] i915 device info: has_psr: yes
[ 2.580137] i915 device info: overlay_needs_physical: no
[ 2.580139] i915 device info: supports_tv: no
[ 2.580141] i915 device info: slice total: 1, mask=0001
[ 2.580143] i915 device info: subslice total: 3
[ 2.580145] i915 device info: slice0: 3 subslices, mask=0007
[ 2.580147] i915 device info: slice1: 0 subslices, mask=0000
[ 2.580149] i915 device info: slice2: 0 subslices, mask=0000
[ 2.580151] i915 device info: EU total: 24
[ 2.580152] i915 device info: EU per subslice: 8
[ 2.580154] i915 device info: has slice power gating: no
[ 2.580155] i915 device info: has subslice power gating: no
[ 2.580157] i915 device info: has EU power gating: yes
[ 2.580159] i915 device info: CS timestamp frequency: 12000 kHz
[ 2.580535] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID a\006OB\024\001 HW-rev 10.0 SW-rev 1.24 quirks 0x0000
[ 2.580626] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
[ 2.581248] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1] status updated from unknown to connected
[ 2.581279] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 2.581301] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 2.581329] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (1)
[ 2.581355] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 2.581373] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 2.581390] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 2.581448] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1] probed modes :
[ 2.581470] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 2.581490] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 48 113120 1920 1968 2000 2142 1080 1083 1089 1100 0x40 0x9
[ 2.581500] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1]
[ 2.581573] [drm:intel_dp_detect [i915]] [CONNECTOR:92:DP-1]
[ 2.581593] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1] status updated from unknown to disconnected
[ 2.581601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1] disconnected
[ 2.581610] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1]
[ 2.581681] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-1]
[ 2.581772] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 2.582004] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 2.582085] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 2.582339] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 2.582381] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 2.582452] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.582520] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 2.585236] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 2.585301] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 2.585569] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 2.585631] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 2.585876] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 2.585906] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 2.585918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1] status updated from unknown to disconnected
[ 2.585931] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1] disconnected
[ 2.585942] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2]
[ 2.586008] [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-2]
[ 2.586029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2] status updated from unknown to disconnected
[ 2.586038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2] disconnected
[ 2.586046] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
[ 2.586112] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
[ 2.586376] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 2.586438] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 2.586683] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 2.586722] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 2.586784] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.586846] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 2.589557] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 2.589620] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 2.589883] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 2.589945] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 2.590188] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 2.590217] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 2.590228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] status updated from unknown to disconnected
[ 2.590236] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
[ 2.590261] [drm:drm_client_modeset_probe [drm]] connector 86 enabled? yes
[ 2.590282] [drm:drm_client_modeset_probe [drm]] connector 92 enabled? no
[ 2.590301] [drm:drm_client_modeset_probe [drm]] connector 99 enabled? no
[ 2.590319] [drm:drm_client_modeset_probe [drm]] connector 105 enabled? no
[ 2.590336] [drm:drm_client_modeset_probe [drm]] connector 110 enabled? no
[ 2.590360] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration
[ 2.590377] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 86
[ 2.590394] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 86 0
[ 2.590410] [drm:drm_client_modeset_probe [drm]] found mode 1920x1080
[ 2.590427] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config
[ 2.590451] [drm:drm_client_modeset_probe [drm]] desired mode 1920x1080 set on crtc 48 (0,0)
[ 2.590473] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (3)
[ 2.590496] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 2.590517] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 92 (2)
[ 2.590536] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 99 (2)
[ 2.590555] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 105 (2)
[ 2.590574] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 110 (2)
[ 2.590588] [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
[ 2.590599] [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 1 primary plane
[ 2.590608] [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 2 primary plane
[ 2.590681] [drm:intelfb_create [i915]] re-using BIOS fb
[ 2.590762] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00000000
[ 2.590907] fbcon: i915drmfb (fb0) is primary device
[ 2.591059] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 2.591092] [drm:drm_mode_object_get [drm]] OBJ ID: 113 (1)
[ 2.591130] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 113 (2)
[ 2.591152] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 2.591170] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 2.591190] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 2.591207] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 2.591225] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 2.591243] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 2.591348] [drm:intel_atomic_check [i915]] [CONNECTOR:86:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36
[ 2.591459] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
[ 2.591535] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 18 pixel clock 140000KHz
[ 2.591605] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
[ 2.591672] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 18
[ 2.591737] [drm:intel_dp_compute_config [i915]] DP link rate required 315000 available 540000
[ 2.591809] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1
[ 2.591883] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_htotal (expected 2120, found 2121)
[ 2.591952] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hblank_end (expected 2120, found 2121)
[ 2.592027] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[ 2.592101] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[ 2.592189] [drm:intel_find_shared_dpll [i915]] [CRTC:48:pipe A] allocated DPLL 0
[ 2.592255] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[ 2.592342] [drm:intel_dump_pipe_config [i915]] [CRTC:48:pipe A] enable: yes [modeset]
[ 2.592413] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB
[ 2.592479] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
[ 2.592544] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4893354, gmch_n: 8388608, link_m: 271853, link_n: 524288, tu: 64
[ 2.592608] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
[ 2.592672] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 2.592696] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 2.592762] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 2.592786] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 2.592853] [drm:intel_dump_pipe_config [i915]] crtc timings: 140000 1920 1968 2000 2121 1080 1083 1089 1100, type: 0x48 flags: 0x9
[ 2.592915] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 140000
[ 2.592979] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 2.593044] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no
[ 2.593106] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 2.593169] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[ 2.593236] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:114] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes
[ 2.593299] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1
[ 2.593363] [drm:intel_dump_pipe_config [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
[ 2.593426] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 2A] fb: [NOFB], visible: no
[ 2.593489] [drm:intel_dump_pipe_config [i915]] [PLANE:45:cursor A] fb: [NOFB], visible: no
[ 2.593614] [drm:intel_edp_backlight_off [i915]]
[ 2.599379] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) e4:b9:7a:3a:72:2e
[ 2.599382] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.599446] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 2.601237] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 2.608168] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.774019] usb 1-5: New USB device found, idVendor=0c45, idProduct=6717, bcdDevice=75.24
[ 2.774024] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.774026] usb 1-5: Product: Integrated_Webcam_HD
[ 2.774028] usb 1-5: Manufacturer: CN0K49W1LOG00879BD4NA01
[ 2.800405] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[ 2.800517] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
[ 2.800634] [drm:intel_disable_pipe [i915]] disabling pipe A
[ 2.816585] [drm:intel_edp_panel_off.part.0 [i915]] Turn eDP port A panel power off
[ 2.816698] [drm:intel_edp_panel_off.part.0 [i915]] Wait for panel power off time
[ 2.816831] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
[ 2.864286] tsc: Refined TSC clocksource calibration: 2112.008 MHz
[ 2.864303] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e718049bae, max_idle_ns: 440795311094 ns
[ 2.864375] clocksource: Switched to clocksource tsc
[ 2.867155] [drm:wait_panel_status [i915]] Wait complete
[ 2.867264] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[ 2.867366] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[ 2.867459] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 48
[ 2.867550] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[ 2.867597] [drm:drm_calc_timestamping_constants [drm]] crtc 48: hwmode: htotal 2121, vtotal 1100, vdisplay 1080
[ 2.867617] [drm:drm_atomic_helper_update_legacy_modeset_state [drm_kms_helper]] crtc 48: clock 140000 kHz framedur 16665000 linedur 15150
[ 2.867718] [drm:intel_atomic_commit_tail [i915]] [ENCODER:85:DDI A]
[ 2.867808] [drm:intel_atomic_commit_tail [i915]] [ENCODER:91:DDI B]
[ 2.867894] [drm:intel_atomic_commit_tail [i915]] [ENCODER:93:DP-MST A]
[ 2.867980] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST B]
[ 2.868062] [drm:intel_atomic_commit_tail [i915]] [ENCODER:95:DP-MST C]
[ 2.868164] [drm:intel_atomic_commit_tail [i915]] [ENCODER:104:DDI C]
[ 2.868248] [drm:intel_atomic_commit_tail [i915]] [ENCODER:106:DP-MST A]
[ 2.868330] [drm:intel_atomic_commit_tail [i915]] [ENCODER:107:DP-MST B]
[ 2.868411] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DP-MST C]
[ 2.868497] [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0
[ 2.868583] [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1
[ 2.868667] [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2
[ 2.868750] [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3
[ 2.868843] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 48
[ 2.868928] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[ 2.869023] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
[ 2.869116] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[ 2.869402] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
[ 2.869509] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 2.869605] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
[ 2.869775] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[ 2.904382] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 3.055877] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 3.055882] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.184368] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 3.337362] usb 1-10: New USB device found, idVendor=0a5c, idProduct=5832, bcdDevice= 1.01
[ 3.337366] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.337369] usb 1-10: Product: 5880
[ 3.337371] usb 1-10: Manufacturer: Broadcom Corp
[ 3.337373] usb 1-10: SerialNumber: 0123456789ABCD
[ 3.504532] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
[ 3.504636] [drm:wait_panel_status [i915]] Wait complete
[ 3.504748] [drm:edp_panel_on [i915]] Wait for panel power on
[ 3.504880] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003
[ 3.611178] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
[ 3.611285] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 3.611382] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
[ 3.611564] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[ 3.707195] [drm:wait_panel_status [i915]] Wait complete
[ 3.707319] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[ 3.707464] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[ 3.707610] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
[ 3.708482] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a
[ 3.708926] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[ 3.709014] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[ 3.709101] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[ 3.709187] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[ 3.709920] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[ 3.709996] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[ 3.711014] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[ 3.711100] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:86:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
[ 3.711382] [drm:intel_enable_pipe [i915]] enabling pipe A
[ 3.711490] [drm:intel_edp_backlight_on [i915]]
[ 3.711580] [drm:intel_panel_enable_backlight [i915]] pipe A
[ 3.711721] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 6000
[ 3.716424] [drm:intel_psr_enable_locked [i915]] Enabling PSR1
[ 3.716864] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
[ 3.716961] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[ 3.717045] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[ 3.717090] [drm:drm_vblank_enable [drm]] enabling vblank on crtc 0, ret: 0
[ 3.728364] [drm:drm_handle_vblank [drm]] vblank event on 5, current 5
[ 3.728595] [drm:verify_connector_state.isra.0 [i915]] [CONNECTOR:86:eDP-1]
[ 3.728639] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 113 (1)
[ 3.728745] [drm:intel_atomic_commit_tail [i915]] [CRTC:48:pipe A]
[ 3.728872] [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0
[ 3.728966] [drm:intel_enable_sagv [i915]] Enabling SAGV
[ 3.729053] [drm:intel_uncore_arm_unclaimed_mmio_detection [i915]] Unclaimed register detected, enabling oneshot unclaimed register reporting. Please use i915.mmio_debug=N for more information.
[ 3.729100] Console: switching to colour frame buffer device 240x67
[ 3.729175] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 3.729208] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 3.729244] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (4)
[ 3.729272] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (5)
[ 3.729327] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.729352] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.729380] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 3.729415] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.729437] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 3.729463] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.729486] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.745072] [drm:drm_handle_vblank [drm]] vblank event on 6, current 6
[ 3.752001] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.752011] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.752020] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 3.752030] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 3.752495] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.761624] [drm:vblank_disable_fn [drm]] disabling vblank on crtc 0
[ 3.768359] [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
[ 3.768376] [drm:drm_client_modeset_probe [drm]]
[ 3.768392] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.768406] [drm:drm_mode_object_get [drm]] OBJ ID: 92 (2)
[ 3.768416] [drm:drm_mode_object_get [drm]] OBJ ID: 99 (2)
[ 3.768425] [drm:drm_mode_object_get [drm]] OBJ ID: 105 (2)
[ 3.768434] [drm:drm_mode_object_get [drm]] OBJ ID: 110 (2)
[ 3.768441] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1]
[ 3.768471] [drm:intel_dp_detect [i915]] [CONNECTOR:86:eDP-1]
[ 3.768513] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.768537] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[ 3.768559] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[ 3.769106] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID a\006OB\024\001 HW-rev 10.0 SW-rev 1.24 quirks 0x0000
[ 3.769135] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
[ 3.769748] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.769759] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 3.769775] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 115 (1)
[ 3.769788] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 3.769798] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.769808] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 3.769842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1] probed modes :
[ 3.769854] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 3.769865] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 48 113120 1920 1968 2000 2142 1080 1083 1089 1100 0x40 0x9
[ 3.769870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1]
[ 3.769897] [drm:intel_dp_detect [i915]] [CONNECTOR:92:DP-1]
[ 3.769911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1] disconnected
[ 3.769916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1]
[ 3.769940] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-1]
[ 3.770169] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.770190] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.770403] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.770430] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.770451] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.770470] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 3.773175] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.773196] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 3.773410] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.773429] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.773643] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.773667] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.773674] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1] disconnected
[ 3.773681] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2]
[ 3.773705] [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-2]
[ 3.773719] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2] disconnected
[ 3.773726] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
[ 3.773749] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
[ 3.773997] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.774019] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.774220] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.774250] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.774273] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.774294] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 3.777001] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.777023] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 3.777241] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.777262] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.777462] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.777494] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.777500] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
[ 3.777516] [drm:drm_client_modeset_probe [drm]] connector 86 enabled? yes
[ 3.777530] [drm:drm_client_modeset_probe [drm]] connector 92 enabled? no
[ 3.777542] [drm:drm_client_modeset_probe [drm]] connector 99 enabled? no
[ 3.777553] [drm:drm_client_modeset_probe [drm]] connector 105 enabled? no
[ 3.777564] [drm:drm_client_modeset_probe [drm]] connector 110 enabled? no
[ 3.777577] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration
[ 3.777589] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 86
[ 3.777599] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 86 0
[ 3.777610] [drm:drm_client_modeset_probe [drm]] found mode 1920x1080
[ 3.777620] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1920x1080 config
[ 3.777636] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.777648] [drm:drm_client_modeset_probe [drm]] desired mode 1920x1080 set on crtc 48 (0,0)
[ 3.777662] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (3)
[ 3.777675] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.777688] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 92 (2)
[ 3.777700] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 99 (2)
[ 3.777712] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 105 (2)
[ 3.777724] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 110 (2)
[ 3.777739] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 3.777751] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 3.777767] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 3.777779] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 3.777791] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.777802] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 3.777813] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.777825] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.777885] [drm:drm_vblank_enable [drm]] enabling vblank on crtc 0, ret: 0
[ 3.778146] [drm:drm_handle_vblank [drm]] vblank event on 8, current 8
[ 3.778174] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.778186] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.778198] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 3.778210] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 3.778225] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
[ 3.778246] [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
[ 3.778259] [drm:drm_client_modeset_probe [drm]]
[ 3.778271] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.778283] [drm:drm_mode_object_get [drm]] OBJ ID: 92 (2)
[ 3.778294] [drm:drm_mode_object_get [drm]] OBJ ID: 99 (2)
[ 3.778305] [drm:drm_mode_object_get [drm]] OBJ ID: 105 (2)
[ 3.778316] [drm:drm_mode_object_get [drm]] OBJ ID: 110 (2)
[ 3.778323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1]
[ 3.778353] [drm:intel_dp_detect [i915]] [CONNECTOR:86:eDP-1]
[ 3.778382] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.778409] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[ 3.778434] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[ 3.778841] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-1c-f8 dev-ID a\006OB\024\001 HW-rev 10.0 SW-rev 1.24 quirks 0x0000
[ 3.778873] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
[ 3.779504] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.779520] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 3.779539] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 113 (1)
[ 3.779556] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 3.779571] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.779585] [drm:drm_add_display_info [drm]] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[ 3.779626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:eDP-1] probed modes :
[ 3.779643] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 60 140000 1920 1968 2000 2121 1080 1083 1089 1100 0x48 0x9
[ 3.779658] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1920x1080": 48 113120 1920 1968 2000 2142 1080 1083 1089 1100 0x40 0x9
[ 3.779666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1]
[ 3.779699] [drm:intel_dp_detect [i915]] [CONNECTOR:92:DP-1]
[ 3.779716] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:92:DP-1] disconnected
[ 3.779723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1]
[ 3.779756] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-1]
[ 3.779987] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.780016] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.780232] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.780265] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.780294] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.780325] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 3.783062] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.783114] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 3.783372] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.783418] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.783651] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.783683] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.783696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-1] disconnected
[ 3.783709] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2]
[ 3.783761] [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-2]
[ 3.783783] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:DP-2] disconnected
[ 3.783794] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
[ 3.783839] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
[ 3.784077] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.784112] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.784320] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.784354] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.784383] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.784410] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 3.787129] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.787146] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 3.787363] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.787380] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.787579] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.787602] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.787608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
[ 3.787622] [drm:drm_client_modeset_probe [drm]] connector 86 enabled? yes
[ 3.787633] [drm:drm_client_modeset_probe [drm]] connector 92 enabled? no
[ 3.787642] [drm:drm_client_modeset_probe [drm]] connector 99 enabled? no
[ 3.787652] [drm:drm_client_modeset_probe [drm]] connector 105 enabled? no
[ 3.787661] [drm:drm_client_modeset_probe [drm]] connector 110 enabled? no
[ 3.787671] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration
[ 3.787681] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 86
[ 3.787689] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 86 0
[ 3.787698] [drm:drm_client_modeset_probe [drm]] found mode 1920x1080
[ 3.787707] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1920x1080 config
[ 3.787720] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.787730] [drm:drm_client_modeset_probe [drm]] desired mode 1920x1080 set on crtc 48 (0,0)
[ 3.787742] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (3)
[ 3.787753] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.787764] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 92 (2)
[ 3.787775] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 99 (2)
[ 3.787786] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 105 (2)
[ 3.787796] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 110 (2)
[ 3.787808] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 3.787819] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 3.787834] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 3.787844] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 3.787855] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.787865] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 3.787876] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.787886] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 3.794807] [drm:drm_handle_vblank [drm]] vblank event on 9, current 9
[ 3.794841] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 3.794854] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 3.794866] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 3.794878] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 3.811689] [drm:vblank_disable_fn [drm]] disabling vblank on crtc 0
[ 3.953612] device-mapper: uevent: version 1.0.3
[ 3.953705] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 5.744958] pcieport 0000:04:00.0: Refused to change power state, currently in D3
[ 5.747472] pci_bus 0000:05: busn_res: [bus 05] is released
[ 5.747608] pci 0000:04:00.0: Removing from iommu group 14
[ 5.747656] pci_bus 0000:06: busn_res: [bus 06-3a] is released
[ 5.747761] pci 0000:04:01.0: Removing from iommu group 15
[ 5.747802] pci_bus 0000:3b: busn_res: [bus 3b] is released
[ 5.747868] pci 0000:04:02.0: Removing from iommu group 16
[ 5.747911] pci_bus 0000:04: busn_res: [bus 04-3b] is released
[ 5.748017] pci 0000:03:00.0: Removing from iommu group 13
[ 6.960503] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[ 6.960620] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
[ 6.960681] [drm:intel_power_well_disable [i915]] disabling DC off
[ 6.960745] [drm:skl_enable_dc6 [i915]] Enabling DC6
[ 6.960804] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[ 20.097361] PM: Image not found (code -22)
[ 20.207462] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.240742] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 20.333181] systemd[1]: Inserted module 'autofs4'
[ 20.389784] systemd[1]: systemd 243-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 20.412397] systemd[1]: Detected architecture x86-64.
[ 20.422151] systemd[1]: Set hostname to <mesh>.
[ 20.505243] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket â?? /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 20.523704] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock â?? /run/docker.sock; please update the unit file accordingly.
[ 20.539975] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm â?? /run/pcscd/pcscd.comm; please update the unit file accordingly.
[ 20.543387] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 20.544598] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 20.546758] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.548878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 20.587097] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 20.594024] lp: driver loaded but no devices found
[ 20.596632] ppdev: user-space parallel port driver
[ 20.743072] input: Intel HID events as /devices/platform/INT33D5:00/input/input9
[ 20.745934] intel-hid INT33D5:00: platform supports 5 button array
[ 20.747222] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
[ 20.752779] ACPI: AC Adapter [AC] (off-line)
[ 20.757770] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20190703/nsprepkg-94)
[ 20.783136] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 20.814554] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 20.816137] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 20.818634] mc: Linux media interface: v0.10
[ 20.820317] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 20.820348] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 20.823202] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 20.824607] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
[ 20.827037] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 20.856778] videodev: Linux video capture interface: v2.00
[ 20.865493] intel_rapl_common: Found RAPL domain package
[ 20.865494] intel_rapl_common: Found RAPL domain dram
[ 20.865622] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 20.901083] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 20.904058] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
[ 20.905355] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
[ 20.910249] iTCO_vendor_support: vendor-support=0
[ 20.915597] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 20.915794] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 20.915884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.921102] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 20.924374] EFI Variables Facility v0.08 2004-May-17
[ 20.925839] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 20.969872] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 20.970724] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 20.971567] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 20.972419] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 20.973269] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 20.974097] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 20.998769] Intel(R) Wireless WiFi driver for Linux
[ 20.999491] Copyright(c) 2003- 2015 Intel Corporation
[ 21.001000] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 21.001806] input: DELL081C:00 044E:121F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input12
[ 21.006819] input: DELL081C:00 044E:121F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input13
[ 21.008056] input: DELL081C:00 044E:121F UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-DELL081C:00/0018:044E:121F.0001/input/input14
[ 21.009275] pstore: Using crash dump compression: deflate
[ 21.009336] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[ 21.009412] Bluetooth: Core ver 2.22
[ 21.009420] NET: Registered protocol family 31
[ 21.009421] Bluetooth: HCI device and connection manager initialized
[ 21.009423] Bluetooth: HCI socket layer initialized
[ 21.009424] Bluetooth: L2CAP socket layer initialized
[ 21.009426] Bluetooth: SCO socket layer initialized
[ 21.016288] hid-multitouch 0018:044E:121F.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL081C:00 044E:121F] on i2c-DELL081C:00
[ 21.018261] pstore: Registered efi as persistent store backend
[ 21.022233] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-8265-36.ucode
[ 21.023658] iwlwifi 0000:02:00.0: loaded firmware version 36.8fd77bb3.0 op_mode iwlmvm
[ 21.043749] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6717)
[ 21.053655] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 21.055043] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 21.057192] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 21.058663] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 21.060137] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input16
[ 21.061614] usbcore: registered new interface driver uvcvideo
[ 21.063027] USB Video Class driver (1.1.1)
[ 21.131091] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 21.131101] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 21.131112] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 21.131119] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 21.131126] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.131132] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 21.131138] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.131143] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.131186] [drm:drm_vblank_enable [drm]] enabling vblank on crtc 0, ret: 0
[ 21.133903] [drm:drm_handle_vblank [drm]] vblank event on 1049, current 1049
[ 21.133940] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.133950] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 21.133961] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 21.133972] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 21.137490] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 21.137501] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 21.137513] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 21.137523] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 21.137575] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.137584] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 21.137594] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.137603] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.150592] [drm:drm_handle_vblank [drm]] vblank event on 1050, current 1050
[ 21.150624] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.150631] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 21.150638] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 21.150646] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 21.161102] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 21.161110] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 21.161119] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 21.161126] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 21.161133] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.161138] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 21.161144] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.161149] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.167214] [drm:drm_handle_vblank [drm]] vblank event on 1051, current 1051
[ 21.167269] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.167276] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 21.167283] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 21.167290] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 21.169742] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (2)
[ 21.169750] [drm:drm_mode_object_get [drm]] OBJ ID: 87 (1)
[ 21.169759] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (3)
[ 21.169765] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (4)
[ 21.169771] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.169776] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (5)
[ 21.169782] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.169787] [drm:drm_mode_object_get [drm]] OBJ ID: 86 (4)
[ 21.183871] [drm:drm_handle_vblank [drm]] vblank event on 1052, current 1052
[ 21.184024] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (5)
[ 21.184032] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 86 (4)
[ 21.184041] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 87 (2)
[ 21.184049] [drm:drm_mode_object_put.part.0 [drm]] OBJ ID: 114 (3)
[ 21.200533] [drm:vblank_disable_fn [drm]] disabling vblank on crtc 0
[ 21.222451] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 21.230125] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.232118] Adding 33431548k swap on /dev/mapper/mesh--vg-swap_1. Priority:-2 extents:1 across:33431548k SSFS
[ 21.252721] usbcore: registered new interface driver btusb
[ 21.255276] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
[ 21.280977] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.293926] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=2600/7500
[ 21.293947] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 2600
[ 21.293985] [drm:intel_power_well_enable [i915]] enabling DC off
[ 21.294009] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[ 21.294108] [drm:intel_power_well_disable [i915]] disabling DC off
[ 21.294141] [drm:skl_enable_dc6 [i915]] Enabling DC6
[ 21.294171] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[ 21.297204] systemd-journald[439]: Received client request to flush runtime journal.
[ 21.303555] intel_rapl_common: Found RAPL domain package
[ 21.303556] intel_rapl_common: Found RAPL domain core
[ 21.303556] intel_rapl_common: Found RAPL domain uncore
[ 21.303557] intel_rapl_common: Found RAPL domain dram
[ 21.304253] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 21.307390] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 21.307414] [drm:intel_power_well_enable [i915]] enabling DC off
[ 21.307436] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[ 21.307464] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 21.327135] audit: type=1400 audit(1573587215.900:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=612 comm="apparmor_parser"
[ 21.327723] audit: type=1400 audit(1573587215.900:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=614 comm="apparmor_parser"
[ 21.327725] audit: type=1400 audit(1573587215.900:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=614 comm="apparmor_parser"
[ 21.327726] audit: type=1400 audit(1573587215.900:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=614 comm="apparmor_parser"
[ 21.328573] audit: type=1400 audit(1573587215.904:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=611 comm="apparmor_parser"
[ 21.329012] audit: type=1400 audit(1573587215.904:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=617 comm="apparmor_parser"
[ 21.329975] audit: type=1400 audit(1573587215.904:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=610 comm="apparmor_parser"
[ 21.330212] audit: type=1400 audit(1573587215.904:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=615 comm="apparmor_parser"
[ 21.330214] audit: type=1400 audit(1573587215.904:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=615 comm="apparmor_parser"
[ 21.330424] audit: type=1400 audit(1573587215.904:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=621 comm="apparmor_parser"
[ 21.370577] iwlwifi 0000:02:00.0: base HW address: b4:69:21:2b:36:62
[ 21.412418] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.412419] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.412419] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.412420] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.412420] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.412421] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 21.412422] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 21.412422] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 21.451710] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 21.451919] thermal thermal_zone8: failed to read out thermal zone (-61)
[ 21.455599] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 21.505423] dell_laptop: Using i8042 filter function for receiving events
[ 21.515426] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 21.515440] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 21.515452] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 21.515464] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 21.515476] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 21.515487] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 21.515498] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 21.515547] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 21.515559] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 21.517660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 21.519022] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 21.520382] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 21.521766] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 21.521805] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 21.521840] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 21.521872] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 21.521963] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 21.522035] [drm:intel_power_well_disable [i915]] disabling DC off
[ 21.522077] [drm:skl_enable_dc6 [i915]] Enabling DC6
[ 21.522111] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[ 21.740489] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.740490] Bluetooth: BNEP filters: protocol multicast
[ 21.740492] Bluetooth: BNEP socket layer initialized
--- End Message ---