Bug#942886: linux-image-5.3.0-1-amd64: Can not modprobe "snd_hda_codec_hdmi"
Package: src:linux
Version: 5.3.7-1
Severity: important
Dear Maintainer,
After upgrade kernel to linux-image-5.3.0-1-amd64, I can not
modprobe "snd_hda_codec_hdmi" any more, it show the error message,
modprobe: ERROR: could not insert 'snd_hda_codec_hdmi': Key was
rejected by service
and my monitor no sound output.
Please help, thank you.
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 5.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191008 (Debian 9.2.1-9)) #1 SMP Debian 5.3.7-1 (2019-10-19)
** Command line:
BOOT_IMAGE=/vmlinuz-5.3.0-1-amd64 root=/dev/mapper/nvme0n1p1_crypt ro rootflags=subvol=rootfs apparmor=1 security=apparmor nosmt rootfstype=btrfs rootflags=subvol=rootfs quiet
** Not tainted
** Kernel log:
[ 7.126154] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 7.127219] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 7.127221] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.127222] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.127222] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 7.127223] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x0
[ 7.127223] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 7.127667] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 7.153862] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.181175] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 7.181662] db_root: cannot open: /etc/target
[ 7.245336] Adding 1952764k swap on /dev/mapper/swap. Priority:-2 extents:1 across:1952764k SSFS
[ 7.279906] bcache: bch_journal_replay() journal replay done, 177 keys in 12 entries, seq 6365286
[ 7.289114] bcache: bch_cached_dev_attach() Caching sda1 as bcache0 on set 3ec1b954-b969-438d-b264-91a36d2a1a4c
[ 7.289136] bcache: register_cache() registered cache device dm-5
[ 7.298596] intel_rapl_common: Found RAPL domain package
[ 7.298598] intel_rapl_common: Found RAPL domain core
[ 7.298598] intel_rapl_common: Found RAPL domain uncore
[ 7.298599] intel_rapl_common: Found RAPL domain dram
[ 11.171939] BTRFS: device fsid b6b55d64-9811-4f26-9d77-f5af7750193f devid 1 transid 2690791 /dev/dm-8
[ 11.189503] BTRFS info (device dm-8): enabling ssd optimizations
[ 11.189504] BTRFS info (device dm-8): turning on discard
[ 11.189507] BTRFS info (device dm-8): use lzo compression, level 0
[ 11.189508] BTRFS info (device dm-8): disk space caching is enabled
[ 11.189509] BTRFS info (device dm-8): has skinny extents
[ 11.269858] audit: type=1400 audit(1571773003.787:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=949 comm="apparmor_parser"
[ 11.270455] audit: type=1400 audit(1571773003.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="transmission" pid=950 comm="apparmor_parser"
[ 11.270943] audit: type=1400 audit(1571773003.787:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/gpicview" pid=948 comm="apparmor_parser"
[ 11.272458] audit: type=1400 audit(1571773003.787:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="un-archiver" pid=951 comm="apparmor_parser"
[ 11.272475] audit: type=1400 audit(1571773003.787:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/wget" pid=952 comm="apparmor_parser"
[ 11.274990] audit: type=1400 audit(1571773003.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/xarchiver" pid=953 comm="apparmor_parser"
[ 11.275621] audit: type=1400 audit(1571773003.791:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="rsyslogd" pid=954 comm="apparmor_parser"
[ 11.276773] audit: type=1400 audit(1571773003.791:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/filezilla" pid=955 comm="apparmor_parser"
[ 11.277188] audit: type=1400 audit(1571773003.795:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=956 comm="apparmor_parser"
[ 11.278016] audit: type=1400 audit(1571773003.795:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/pavucontrol" pid=957 comm="apparmor_parser"
[ 11.463897] new mount options do not match the existing superblock, will be ignored
[ 11.562102] 8021q: 802.1Q VLAN Support v1.8
[ 11.564878] vlanbr20: port 1(eno1.20) entered blocking state
[ 11.564880] vlanbr20: port 1(eno1.20) entered disabled state
[ 11.564912] device eno1.20 entered promiscuous mode
[ 11.566123] device eno1 entered promiscuous mode
[ 11.681309] vlanbr30: port 1(eno1.30) entered blocking state
[ 11.681310] vlanbr30: port 1(eno1.30) entered disabled state
[ 11.681339] device eno1.30 entered promiscuous mode
[ 11.795790] br0: port 1(eno1) entered blocking state
[ 11.795791] br0: port 1(eno1) entered disabled state
[ 11.918595] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03
[ 11.920568] microcode: updated to revision 0x27, date = 2019-02-26
[ 11.924052] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[ 11.924053] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
[ 11.924054] microcode: Reload completed, microcode revision: 0x27
[ 11.960689] vlanbr20: port 2(tap20-103) entered blocking state
[ 11.960690] vlanbr20: port 2(tap20-103) entered disabled state
[ 11.960728] device tap20-103 entered promiscuous mode
[ 11.960745] vlanbr20: port 2(tap20-103) entered blocking state
[ 11.960746] vlanbr20: port 2(tap20-103) entered forwarding state
[ 11.972392] vlanbr30: port 2(tap30-103) entered blocking state
[ 11.972393] vlanbr30: port 2(tap30-103) entered disabled state
[ 11.972428] device tap30-103 entered promiscuous mode
[ 11.972443] vlanbr30: port 2(tap30-103) entered blocking state
[ 11.972444] vlanbr30: port 2(tap30-103) entered forwarding state
[ 12.119877] device-mapper: core: qemu-system-x86: sending ioctl 5326 to DM device without required privilege.
[ 13.027291] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.027297] NFSD: Using legacy client tracking operations.
[ 13.027298] NFSD: starting 90-second grace period (net f0000098)
[ 13.108711] vlanbr30: port 3(veth0QB1WP) entered blocking state
[ 13.108712] vlanbr30: port 3(veth0QB1WP) entered disabled state
[ 13.108740] device veth0QB1WP entered promiscuous mode
[ 13.108775] vlanbr30: port 3(veth0QB1WP) entered blocking state
[ 13.108776] vlanbr30: port 3(veth0QB1WP) entered forwarding state
[ 13.137845] eth0: renamed from vethXWO843
[ 13.166059] new mount options do not match the existing superblock, will be ignored
[ 13.220369] vlanbr30: port 4(vethSD0Y9Z) entered blocking state
[ 13.220371] vlanbr30: port 4(vethSD0Y9Z) entered disabled state
[ 13.220399] device vethSD0Y9Z entered promiscuous mode
[ 13.220442] vlanbr30: port 4(vethSD0Y9Z) entered blocking state
[ 13.220443] vlanbr30: port 4(vethSD0Y9Z) entered forwarding state
[ 13.232273] broken atomic modeset userspace detected, disabling atomic
[ 13.249853] eth0: renamed from vethO3HRON
[ 13.284997] new mount options do not match the existing superblock, will be ignored
[ 13.307525] BTRFS warning (device dm-0): qgroup rescan init failed, qgroup is not enabled
[ 13.307928] BTRFS warning (device dm-8): qgroup rescan init failed, qgroup is not enabled
[ 13.311517] BTRFS warning (device dm-0): qgroup rescan init failed, qgroup is not enabled
[ 15.595265] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.595298] br0: port 1(eno1) entered blocking state
[ 15.595299] br0: port 1(eno1) entered forwarding state
[ 15.595355] vlanbr20: port 1(eno1.20) entered blocking state
[ 15.595355] vlanbr20: port 1(eno1.20) entered forwarding state
[ 15.595383] vlanbr30: port 1(eno1.30) entered blocking state
[ 15.595385] vlanbr30: port 1(eno1.30) entered forwarding state
[ 26.587189] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 26.590321] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 26.592470] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 26.596219] retire_capture_urb: 138 callbacks suppressed
[ 42.248559] broken atomic modeset userspace detected, disabling atomic
[ 42.422269] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 51.311986] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 51.319389] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 51.324861] usb 2-10: current rate 17476 is different from the runtime rate 44100
[ 186.293544] snd_hda_codec_hdmi: disagrees about version of symbol module_layout
** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2801
board_vendor: ASUSTeK COMPUTER INC.
board_name: GRYPHON Z97
board_version: Rev 1.xx
** Loaded modules:
rpcsec_gss_krb5
8021q
garp
mrp
nft_reject_ipv6
nft_reject_ipv4
nft_reject_inet
nft_reject_bridge
nft_reject
nft_redir
nft_quota
nft_queue
nft_objref
nft_numgen
nft_nat
nft_masq
nft_log
nft_limit
nft_hash
nft_fwd_netdev
nft_fib_netdev
nft_fib_inet
nft_fib_ipv4
nft_fib_ipv6
nft_fib
nft_dup_netdev
nf_dup_netdev
nft_dup_ipv6
intel_rapl_msr
nf_dup_ipv6
nft_dup_ipv4
intel_rapl_common
nf_dup_ipv4
nft_ct
nft_counter
nft_compat
xt_NFLOG
xt_LOG
nfnetlink_log
nf_tables_set
nf_tables
nfnetlink
nf_reject_ipv6
nf_reject_ipv4
nf_nat
nf_log_ipv6
nf_log_ipv4
nf_log_bridge
nf_log_arp
nf_log_common
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
vhost_scsi
target_core_mod
configfs
vhost_net
vhost
veth
bridge
x86_pkg_temp_thermal
intel_powerclamp
stp
llc
tap
tun
coretemp
snd_usb_audio
kvm_intel
snd_usbmidi_lib
kvm
intel_cstate
irqbypass
eeepc_wmi
snd_rawmidi
asus_wmi
intel_uncore
snd_hda_codec_realtek
snd_seq_device
mc
snd_hda_codec_generic
pcspkr
sg
intel_rapl_perf
sparse_keymap
i915
rfkill
wmi_bmof
ledtrig_audio
evdev
snd_hda_intel
drm_kms_helper
snd_hda_codec
whci_hcd
snd_hda_core
whci
umc
wusbcore
snd_hwdep
uwb
snd_pcm
iTCO_wdt
iTCO_vendor_support
uhci_hcd
ohci_pci
ohci_hcd
snd_timer
watchdog
mei_me
drm
nls_iso8859_1
mxm_wmi
snd
mei
i2c_algo_bit
soundcore
acpi_pad
button
nfsv4
nfs
nls_utf8
cifs
gcm
libarc4
dns_resolver
fscache
squashfs
nfsd
overlay
vfat
auth_rpcgss
fat
nfs_acl
lockd
isofs
grace
fuse
sunrpc
ip_tables
x_tables
autofs4
dm_crypt
dm_mod
loop
ext4
crc16
mbcache
jbd2
btrfs
xor
zstd_decompress
zstd_compress
uas
usb_storage
raid6_pq
libcrc32c
crc32c_generic
bcache
crc64
hid_generic
usbhid
hid
sd_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
ahci
aesni_intel
libahci
libata
aes_x86_64
crypto_simd
scsi_mod
i2c_i801
cryptd
glue_helper
nvme
lpc_ich
xhci_pci
mfd_core
xhci_hcd
ehci_pci
ehci_hcd
e1000e
usbcore
nvme_core
ptp
pps_core
usb_common
fan
wmi
video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: None
Memory behind bridge: dfc00000-dfcfffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
Region 0: Memory at df800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at dfd34000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB xHCI Controller [8086:8cb1] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB xHCI Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at dfd20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 9 Series Chipset Family ME Interface #1 [8086:8cba]
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family ME Interface [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 36
Region 0: Memory at dfd3e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I218-V [8086:15a1]
DeviceName: Onboard LAN
Subsystem: ASUSTeK Computer Inc. Ethernet Connection (2) I218-V [1043:85c4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at dfd00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfd3c000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2 [8086:8cad] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfd3b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 9 Series Chipset Family HD Audio Controller [8086:8ca0]
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family HD Audio Controller [1043:8618]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at dfd30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1 [8086:8ca6] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dfd3a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z97 Chipset LPC Controller [8086:8cc4]
Subsystem: ASUSTeK Computer Inc. Z97 Chipset LPC Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode] [8086:8c82] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SATA Controller [AHCI Mode] [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at dfd39000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 9 Series Chipset Family SMBus Controller [8086:8ca2]
Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SMBus Controller [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dfd38000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 004 Device 002: ID 8087:8001 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 002 Device 002: ID 24ae:1100 RAPOO Rapoo 2.4G Wireless Device
Bus 002 Device 005: ID 046d:c317 Logitech, Inc. Wave Corded Keyboard
Bus 002 Device 004: ID 0c76:160a JMTek, LLC. USB Audio Device
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.3.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-3
ii linux-base 4.6
Versions of packages linux-image-5.3.0-1-amd64 recommends:
ii apparmor 2.13.3-5+b1
ii firmware-linux-free 3.4
Versions of packages linux-image-5.3.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-3
pn linux-doc-5.3 <none>
Versions of packages linux-image-5.3.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: