Bug#941597: linux-image-5.2.0-0.bpo.2-arm64: Raspberry Pi 3B+: does not shut down (regression against buster)
Package: src:linux
Version: 5.2.9-2~bpo10+1
Severity: normal
With the backports kernel, a Raspberry Pi 3B+ cannot be shut down
or rebooted; the buster kernel manages that (but does not have sound).
I’ve captured the last couple of lines on the screen: the first two
are from sysvinit, three kernel ones follow:
Will now restart.
I: executing reboot "-d" "-f" "-i" regardless of check results.
[ 1168.343056] kvm: exiting hardware virtualization
[ 1168.352199] reboot: Restarting system
[ 1168.358391] Reboot failed -- System halted
Note I have the following firmware package installed:
ii raspi3-firmware 1.20190215-1+deb10u1 arm64 Raspberry Pi 2 and 3 GPU firmware and bootloaders
I know unstable carries a later one, but that’s not in backports.
Not sure whether that would make a difference. Currently, the
kernel is the only backports package I have installed.
-- Package-specific info:
** Version:
Linux version 5.2.0-0.bpo.2-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.2.9-2~bpo10+1 (2019-08-25)
** Command line:
bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0xa5e576b6 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:E5:76:B6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=128M rootwait
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 5.053654] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 5.059640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 5.065497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.071349] usb usb1: Product: DWC OTG Controller
[ 5.077130] usb usb1: Manufacturer: Linux 5.2.0-0.bpo.2-arm64 dwc2_hsotg
[ 5.082902] usb usb1: SerialNumber: 3f980000.usb
[ 5.089579] hub 1-0:1.0: USB hub found
[ 5.095483] hub 1-0:1.0: 1 port detected
[ 5.495140] usb 1-1: new high-speed USB device number 2 using dwc2
[ 5.713780] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 5.719700] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.727468] hub 1-1:1.0: USB hub found
[ 5.733423] hub 1-1:1.0: 4 ports detected
[ 5.746030] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.027120] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 6.049550] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.131504] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 6.137581] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.144425] hub 1-1.1:1.0: USB hub found
[ 6.150479] hub 1-1.1:1.0: 3 ports detected
[ 6.443150] usb 1-1.1.2: new low-speed USB device number 4 using dwc2
[ 6.561074] usb 1-1.1.2: New USB device found, idVendor=1241, idProduct=1177, bcdDevice= 2.70
[ 6.567077] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.655174] usb 1-1.1.3: new low-speed USB device number 5 using dwc2
[ 6.764926] usb 1-1.1.3: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 6.771086] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.777081] usb 1-1.1.3: Product: Dell QuietKey Keyboard
[ 6.782996] usb 1-1.1.3: Manufacturer: DELL
[ 7.011214] usb 1-1.1.1: new high-speed USB device number 6 using dwc2
[ 7.119877] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 7.125885] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.262851] random: crng init done
[ 7.381018] systemd-udevd[357]: Network interface NamePolicy= disabled on kernel command line, ignoring.
[ 8.250758] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.273456] vchiq: vchiq_init_state: slot_zero = 00000000fa164383
[ 8.316841] bcm2835-rng 3f104000.rng: hwrng registered
[ 8.380910] systemd-udevd[374]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 8.589125] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.614860] libphy: Fixed MDIO Bus: probed
[ 8.700164] usbcore: registered new interface driver usbhid
[ 8.707013] usbhid: USB HID core driver
[ 8.919856] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 8.928383] libphy: lan78xx-mdiobus: probed
[ 9.113656] media: Linux media interface: v0.10
[ 9.174565] usbcore: registered new interface driver lan78xx
[ 9.237491] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.245368] usbcore: registered new interface driver brcmfmac
[ 9.301761] videodev: Linux video capture interface: v2.00
[ 9.318332] input: HID 1241:1177 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1241:1177.0001/input/input0
[ 9.325927] hid-generic 0003:1241:1177.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-3f980000.usb-1.1.2/input0
[ 9.334804] input: DELL Dell QuietKey Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:413C:2106.0002/input/input1
[ 9.337791] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin
[ 9.349811] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt (-2)
[ 9.349819] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 9.349828] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
[ 9.369971] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.txt
[ 9.400133] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-3f980000.usb-1.1.3/input0
[ 9.438461] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.476421] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 9.486499] systemd-udevd[367]: Using default interface naming scheme 'v240'.
[ 9.542286] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.550435] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2)
[ 9.558657] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 9.565758] systemd-udevd[367]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 9.567640] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 9.583682] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 9.721673] systemd-udevd[376]: Using default interface naming scheme 'v240'.
[ 9.732089] systemd-udevd[376]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 9.789115] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory: -17
[ 9.803707] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.805326] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 9.821496] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 9.836488] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 9.845618] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 9.854725] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 9.863749] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 9.872942] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.882235] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.891432] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.940620] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 9.949054] checking generic (3e97a000 280000) vs hw (0 ffffffffffffffff)
[ 9.949062] fb0: switching to vc4drmfb from simple
[ 9.957599] Console: switching to colour dummy device 80x25
[ 9.958307] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.958333] [drm] Driver supports precise vblank timestamp query.
[ 9.960723] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 9.993109] Console: switching to colour frame buffer device 160x64
[ 10.025051] vc4-drm soc:gpu: fb0: vc4drmfb frame buffer device
[ 10.156043] Bluetooth: Core ver 2.22
[ 10.156293] NET: Registered protocol family 31
[ 10.156392] Bluetooth: HCI device and connection manager initialized
[ 10.156547] Bluetooth: HCI socket layer initialized
[ 10.156658] Bluetooth: L2CAP socket layer initialized
[ 10.156787] Bluetooth: SCO socket layer initialized
[ 16.611756] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard
[ 19.144325] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.878622] elogind-daemon[1714]: New seat seat0.
[ 39.883181] elogind-daemon[1714]: Watching system buttons on /dev/input/event1 (DELL Dell QuietKey Keyboard)
[ 42.446245] elogind-daemon[1714]: New session 1 of user test.
[ 44.967783] elogind-daemon[1714]: New session 2 of user test.
** Model information
Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3
** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
btsdio
bluetooth
bcm2835_v4l2(C)
vc4
evdev
drbg
v4l2_common
videobuf2_vmalloc
ansi_cprng
snd_soc_core
snd_bcm2835(C)
videobuf2_memops
videobuf2_v4l2
snd_pcm_dmaengine
ecdh_generic
ecc
snd_pcm
videobuf2_common
hid_generic
snd_timer
videodev
brcmfmac
snd
media
brcmutil
microchip
cfg80211
soundcore
cec
lan78xx
drm_kms_helper
rfkill
usbhid
of_mdio
fixed_phy
drm
hid
libphy
bcm2835_rng
bcm2835_thermal
rng_core
pwm_bcm2835
vchiq(C)
leds_gpio
ext4
crc16
mbcache
jbd2
crc32c_generic
dwc2
udc_core
usbcore
sdhci_iproc
sdhci_pltfm
sdhci
usb_common
bcm2835
i2c_bcm2835
phy_generic
** Network interface configuration:
*** /etc/network/interfaces:
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
# The loopback network interface
auto lo
iface lo inet loopback
# First Ethernet interface
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:27:eb:e5:76:b6 brd ff:ff:ff:ff:ff:ff
inet 172.26.12.73/16 brd 172.26.255.255 scope global dynamic eth0
valid_lft 43058sec preferred_lft 43058sec
inet6 fe80::ba27:ebff:fee5:76b6/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether e6:e4:5c:3a:66:07 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 434271 2362 0 4 0 0 0 0 71875 618 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
1128 total packets received
24 with invalid addresses
0 forwarded
0 incoming packets discarded
1094 incoming packets delivered
581 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5 active connection openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
748 segments received
532 segments sent out
0 segments retransmitted
0 bad segments received
7 resets sent
Udp:
49 packets received
0 packets to unknown port received
0 packet receive errors
49 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 296
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
328 packet headers predicted
9 acknowledgments not containing data payload received
340 predicted acknowledgments
3 connections reset due to unexpected data
TCPRcvCoalesce: 6
TCPOrigDataSent: 355
TCPDelivered: 360
IpExt:
InMcastPkts: 1
InBcastPkts: 296
InOctets: 344295
OutOctets: 61384
InMcastOctets: 32
InBcastOctets: 61468
InNoECTPkts: 1128
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: 10.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: arm64 (aarch64)
Kernel: Linux 5.2.0-0.bpo.2-arm64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=C.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-5.2.0-0.bpo.2-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-5.2.0-0.bpo.2-arm64 recommends:
pn apparmor <none>
ii firmware-linux-free 3.4
Versions of packages linux-image-5.2.0-0.bpo.2-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.2 <none>
Versions of packages linux-image-5.2.0-0.bpo.2-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20190114-2
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: