Bug#933228: linux-image-4.19.0-5-arm64: Please enable CONFIG_VIDEO_BCM2835=m
Package: src:linux
Version: 4.19.37-5
Severity: wishlist
Dear Maintainer,
Raspberry Pi3, from which I write this bugreport, is a popular SoC that finally got a proper support by Debian project.
It would be nice to have a kernel module for the camera host interface, which is included into Debian's kernel source tree, but is currently disabled.
Tainted status of the current kernel comes from self-built bcm2835_v4l2.
Sincerely yours, Reco
-- Package-specific info:
** Version:
Linux version 4.19.0-5-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-arm64 root=/dev/mapper/pi2-root ro quiet
** Tainted: COE (13312)
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3
** Loaded modules:
dm_snapshot
dm_bufio
cbc
cts
rpcsec_gss_krb5
nfsv4
dns_resolver
nfs
lockd
grace
fscache
nls_ascii
nls_cp437
vfat
fat
8021q
garp
mrp
stp
llc
ip6_tables
ip6t_REJECT
nf_reject_ipv6
xt_mac
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_hashlimit
xt_tcpudp
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
xt_comment
nft_compat
nf_tables
nfnetlink
btsdio
bluetooth
drbg
ansi_cprng
microchip
ecdh_generic
brcmfmac
lan78xx
brcmutil
of_mdio
cfg80211
fixed_phy
libphy
rfkill
bcm2835_thermal
bcm2835_rng
rng_core
efi_pstore
bcm2835_wdt
leds_gpio
efivars
bcm2835_v4l2(OE)
vchiq(C)
v4l2_common
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
auth_rpcgss
videodev
sunrpc
media
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
aes_arm64
dm_mod
dwc2
udc_core
usbcore
sdhci_iproc
sdhci_pltfm
sdhci
usb_common
bcm2835
phy_generic
fixed
** PCI devices:
not available
** USB devices:
Bus 001 Device 004: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: arm64 (aarch64)
Kernel: Linux 4.19.0-5-arm64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-arm64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: