Your message dated Sun, 14 Jul 2019 00:02:54 +0100 with message-id <51f696d461e6e0ffcc4642b456b0af83da3d251a.camel@decadent.org.uk> and subject line Re: Modeset: Invalid argument. No GUI. has caused the Debian Bug report #927921, regarding Modeset: Invalid argument. No GUI. to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 927921: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927921 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Modeset: Invalid argument. No GUI.
- From: thefoo <thefoo@foo.fo>
- Date: Thu, 25 Apr 2019 05:22:01 +0200
- Message-id: <155616252153.1870.2969298506892066913.reportbug@schmoedeb>
Package: src:linux Version: 4.19.28-2 Severity: important Dear maintainer, I have two kernels installed: 4.19.0-2 and 4.19.0-4 (both amd64 from buster). The described problems happen only when 4.19.0-4 is booted. Basically, any (Xorg) GUI start fails, and /var/log/Xorg.0.log contains eg. this line: (EE) modeset(0): Failed to set mode: Invalid argument I have not much ideas what additional information could help, please tell me anything you'd like to know. Note that I have installed bumblebee and nvidia driver, but run intel driver usually. Completely removing bumblebee and anything nvidia-related doesn't change the situation. Thank you -- Package-specific info: ** Version: Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=/dev/mapper/sda4_crypt ro rootflags=subvol=main quiet ** Tainted: OE (12288) * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information sys_vendor: Dell Inc. product_name: Precision 7520 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 1.13.0 board_vendor: Dell Inc. board_name: 09Y5WW board_version: A00 ** Loaded modules: pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) fuse i2c_dev cmac bnep bbswitch(OE) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic nls_ascii nls_cp437 vfat fat ext4 mbcache jbd2 fscrypto ecb ip6t_REJECT nf_reject_ipv6 cdc_mbim arc4 cdc_wdm cdc_ncm usbnet qcserial usb_wwan mii usbserial xt_hl ip6_tables ip6t_rt ipt_REJECT nf_reject_ipv4 dell_rbtn mei_wdt dell_wmi wmi_bmof mxm_wmi intel_rapl x86_pkg_temp_thermal intel_powerclamp ppdev coretemp nft_limit dell_laptop dell_smbios kvm_intel dell_wmi_descriptor iwlmvm btusb btrtl dcdbas btbcm kvm btintel dell_smm_hwmon irqbypass mac80211 sg bluetooth intel_cstate xt_limit drbg joydev evdev ansi_cprng serio_raw xt_addrtype xt_tcpudp ecdh_generic efi_pstore snd_hda_intel iwlwifi intel_uncore crc16 intel_rapl_perf snd_hda_codec i915 xt_conntrack snd_hda_core nft_compat rtsx_pci_ms efivars snd_hwdep cfg80211 snd_pcm iTCO_wdt memstick iTCO_vendor_support snd_timer snd soundcore rfkill drm_kms_helper idma64 nft_counter drm mei_me mei processor_thermal_device parport_pc ie31200_edac i2c_algo_bit intel_soc_dts_iosf parport intel_pch_thermal battery int3403_thermal dell_smo8800 wmi intel_hid int3400_thermal int3402_thermal video sparse_keymap acpi_thermal_rel int340x_thermal_zone pcc_cpufreq acpi_pad ac button nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink efivarfs ip_tables x_tables autofs4 btrfs xor zstd_decompress zstd_compress xxhash raid6_pq libcrc32c crc32c_generic algif_skcipher af_alg sr_mod cdrom uas usb_storage usbhid dm_crypt dm_mod sd_mod hid_alps hid_generic crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc rtsx_pci_sdmmc mmc_core ahci xhci_pci libahci xhci_hcd aesni_intel aes_x86_64 libata crypto_simd psmouse cryptd e1000e glue_helper usbcore scsi_mod i2c_hid i2c_i801 rtsx_pci hid intel_lpss_pci intel_lpss usb_common thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5918] (rev 05) Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: ie31200_edac Kernel modules: ie31200_edac 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ec000000-ed0fffff Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics P630 [8086:591d] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Dell HD Graphics P630 [1028:07b0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 131 Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 05) Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:07b0] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at ed340000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI]) Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 129 Region 0: Memory at ed330000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal Subsystem [1028:07b0] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at ed358000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:15.0 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 [8086:a160] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ed357000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:15.1 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 [8086:a161] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at ed356000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family MEI Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 130 Region 0: Memory at ed355000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [1028:07b0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 128 Region 0: Memory at ed350000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at ed354000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at ed353000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 123 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: ed200000-ed2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 [8086:a112] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 124 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: ed100000-ed1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 125 Bus: primary=00, secondary=04, subordinate=3c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d4000000-ea0fffff Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation CM238 Chipset LPC/eSPI Controller [8086:a154] (rev 31) Subsystem: Dell CM238 Chipset LPC/eSPI Controller [1028:07b0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family Power Management Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at ed34c000 (32-bit, non-prefetchable) [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller [8086:a171] (rev 31) Subsystem: Dell CM238 HD Audio Controller [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 133 Region 0: Memory at ed348000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at ed320000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31) Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus [1028:07b0] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at ed352000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (5) I219-LM [8086:15e3] (rev 31) Subsystem: Dell Ethernet Connection (5) I219-LM [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at ed300000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107GLM [Quadro M1200 Mobile] [10de:13b6] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nvidia 02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78) Subsystem: Intel Corporation Wireless 8265 / 8275 [8086:0050] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 132 Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01) Subsystem: Dell RTS525A PCI Express Card Reader [1028:07b0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 126 Region 1: Memory at ed100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci ** USB devices: Bus 002 Device 003: ID 413c:5534 Dell Computer Corp. Bus 002 Device 002: ID 413c:81b6 Dell Computer Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 413c:2134 Dell Computer Corp. Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 006: ID 046d:c328 Logitech, Inc. Corded Keyboard K280e Bus 001 Device 004: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse Bus 001 Device 008: ID 13fd:3940 Initio Corporation external DVD burner ECD819-SU3 Bus 001 Device 002: ID 413c:2513 Dell Computer Corp. internal USB Hub of E-Port Replicator Bus 001 Device 007: ID 0a5c:5832 Broadcom Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-4-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-4-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133 ii kmod 26-1 ii linux-base 4.5 Versions of packages linux-image-4.19.0-4-amd64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 ii irqbalance 1.5.0-3 Versions of packages linux-image-4.19.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-11 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-4-amd64 is related to: ii firmware-amd-graphics 20190114-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20190114-1 pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20190114-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 927921-done@bugs.debian.org
- Subject: Re: Modeset: Invalid argument. No GUI.
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 14 Jul 2019 00:02:54 +0100
- Message-id: <51f696d461e6e0ffcc4642b456b0af83da3d251a.camel@decadent.org.uk>
- In-reply-to: <155616252153.1870.2969298506892066913.reportbug@schmoedeb>
- References: <155616252153.1870.2969298506892066913.reportbug@schmoedeb>
Closing due to the invalid submitter address. Ben. -- Ben Hutchings One of the nice things about standards is that there are so many of them.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---